Search Results

Search found 20752 results on 831 pages for 'bit representation'.

Page 51/831 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Asus P6X58D & 12GB of RAM

  - by Hunter

  I just assembled my new PC and it screams, BUT it's only recognizing 8GB of ram in BIOS and OS rather than the installed 12GB. In the BIOS the RAM was registering at 1066 so I set it to 1600MHz. I update the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS = Windows 7 Ultimate 64-bit Mobo = Asus P6X58D Premium CPU = Intel Core i7 920 RAM = CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD = Intel 80GB SSD SATA II PS = Kingwin 1000W Modular I've installed the Beta BIOS 0808 but no luck!

  Read the article

• Why is windows 7 marking all my extra RAM as "hardware reserved"?

  - by pinkmuppet

  I have a new HP Z800 Workstation, running Windows 7 Enterprise 64 bit. The machine has 4GB of RAM -- windows reported 1.99GB available, 2GB was "hardware reserved". I added another 2 GB and windows reports that there is 6GB of physical RAM, but now 4GB is "hardware reserved". The BIOS sees the full RAM amount as well. The video card is an nVida Quadro FX 580, so it shouldn't be using any shared memory at all. whats going on? Z800 Specs are here.

  Read the article

• CheckPoint SecuRemote / SecureClient on Vista 64

  - by cliff.meyers

  According to this page, CheckPoint's SecuRemote client is not supported on Vista 64: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit%5FdoGoviewsolutiondetails=&solutionid=sk36681 Unfortunately in working with the systems team they will not confirm if the other two clients (SSL Network Extender or Endpoint Connect) are supported by their environment. Does anyone know if it would be possible to do the following? Install VMware Workstation on my Vista 64 system (host) install a Vista 32-bit OS in a virtual machine (guest) Install SecuRemote VPN client within the guest (Vista 32) Get my Vista 64 machine (host) to use the VPN connection from the guest Any other ideas are more than welcome.

  Read the article

• Can't access some websites with any browser

  - by Charles Kingsmill

  I'm running Windows 7 64-bit on a new Samsung laptop and accessing the internet okay via ethernet cable to my university's ISP. Some sites work fine (e.g. google.com) but I can't access others at all (microsoft.com, topshop.com). I can't connect to those sites in safe mode with networking. And ping and tracert both fail. There's no proxy. Other users can connect successfully to these sites using my cable and socket. I've tried all the following with no success: using various browsers (IE9, FF, Chrome) creating a new user updating drivers clearing the DNS cache using OpenDNS and Google's DNS turning off Avast tweaking the MTU running MS malicious software removal tool running Spybot S&D reviewing the hosts file disabling the IPv6 options repairing / resetting winsock settings disabling advanced javascript options I have run out of ideas... can anyone see anything I've missed??!

  Read the article

• How to copy partition from one disc to another (boot partition keeping all the vital data)?

  - by Patryk

  I have bought a new laptop but the HDD, which runs at 5400 rpm, is not sufficient for me. The laptop runs Windows 7 64-bit. I have my 'old' one (a better one - Seagate Momentus 7200 rpm) and I would like to replace it but without reinstalling everything. And there my question arises: can I copy my boot partition from my laptop hard drive to my old drive so that it will boot from it properly? If so, then how to do it? Will Norton Ghost be useful here? My point would be to just replace this partition and leave the rest.

  Read the article

• Windows hangs on Rename, Delete and Move for specific MKV files

  - by Creativehavoc

  I have been googling this issue for a long time, and no full solutions seem to be out there. For certain mkv files, windows hangs when moving, copying, or deleting. These files play fine in a player such as GOM player. System: a fast windows 7, 64 bit box. Results: CPU change is negligible Memory usage rockets up to ~100% In cased of delete or move, "discovering files" dialogue box stays up for a long time Rename simply shows spinning icon until it finishes Action is completed after EXTREMELY long amount of time Memory usage does not return to normal "Fixes:" Disable thumbnail creation (helps for some cases) After move/rename/delete kill explorer with taskmanager, and relaunch to re-claim your memory Even with the thumbnails turned off, the issue persists. I have also tried re-muxing a file, which worked fine, but still resulted in a file with the same above issues.

  Read the article

• Wake timers don't wake computer from sleep mode

  - by Joe

  I'm got a custom built PC running 64 bit Windows 7 Ultimate. So far everything works great except for one thing: it will not wake up from sleep mode for a wake timer or scheduled task. Sleep mode itself works great. If it's sleeping, it wakes successfully when I press the power button, mash the keyboard, wiggle the mouse, or send a WOL packet. The only problem is wake timers. I even tried the program WakeupOnStandBy but it looks like that uses wake timers, so it doesn't do anything for me either. And yes, wake timers are enabled: Any ideas on how to fix the problem, or troubleshoot it? I'd imagine that there would be a log somewhere telling me exactly why the wake timers are having trouble, but if there is I haven't found it.

  Read the article

• iTunes sees my iPhone, but Windows 7 x64 doesn't

  - by Herb Caudill

  After reinstalling Windows 7 (64-bit), it has stopped recognizing my iPhone. I can see it in iTunes but not in Windows Explorer, so I can't get the photos off. I'm having this problem on three different machines and two different iPhones (my wife's and mine). It's maddening. I've had every version of iPhone since it first came out and I've never had this problem before. I've uninstalled and reinstalled iTunes (currently at 10.2.1.1). I've updated iOS on the phone (currently at 4.3). In the device manager, this is what I see: Here's the properties screen for the unrecognized iPhone: And here's what I get after going through the "update driver" process: Any ideas? At the end of my rope here...

  Read the article

• Keyboard doesn't let me press certain keys at the same time

  - by kitchen

  I'm not sure how to word the problem other than I can't use certain keys at the same time. For example, when playing games that require you to use the arrow keys to move and jump/duck I am unable to move to the left and jump (left arrow + up arrow) at the same time. As a result, I don't play many games when I get to a point where the jumps and what not are too far. This happens with other keys as well. In FPS I am unable to hold W to move forward and hit 2 to select my secondary weapon. Some information that might help you: I am using Windows 7 64-bit I am using a Micro Innovations KB565BL keyboard How can I fix this?

  Read the article

• nVidia driver is not installed for x64 Windows 7 (Vaio VGN-SZ460N)

  - by Sergey Osypchuk

  I just upgraded memory to 4GB for Sony Vaio VGN-SZ460N laptop and trying to install Windows 7 x64. All works fine with default drivers, except video - I am not able to set resolution more than 1024x768. Technical specification says that this model is using: Chipset : Intel® 945GM Processor : NVIDIA® GeForce® Go 7400 notebook graphics processing unit (GPU) and Intel® Graphics Media Accelerator 950 I was trying to use Intel 945GM driver, for Windows 7 Ultimate x64 and get error: This computer does not meet the mininum requirements for installing the software Also, I was trying to download nVidia GeForce Go 7400 x64 but it says that there is no compatible hardware. Actually, it has disclaimer that those drivers doesn't work for Sony vaio and recomendation to use OEM website. Sony website has only 32-bit version of driver which says that it cannot be installed and x64 should be used... Any ideas?

  Read the article

• Not enough storage is available to process this command

  - by Mohit

  I am getting this error on almost all of the operations on a Windows 7 pro 32 bit machine. By operations I mean anything I do. Update a repo from subversion. Access a local IIS Site. Copy a big folder. Run an installer.and sometime if I try again. It get solved. I think there is something wrong wit windows7 . I searched around and found posts suggesting to increase IRPStackSize value in registry I did that no Luck. I am using Microsoft Security Essentials Version: 1.0.1961.0 as my antivirus package Once this errors starts popping up. I have to restart and then in after some random time. It starts showing up again. Any help is appreciated. I am losing lot of my time in restarting my system or retrying again and again.

  Read the article

• Proper way to re-image Windows 7?

  - by Alec

  I had a driver completely fail on me so I have to restore my computer from a system image backup. I used an installation DVD to run the Re-Image utility on there, but after 8 hours of "preparing the image" to be restored, it began restoring to my hard drive. After 12 hours there, it was 5-8% complete. I figured I must have done something wrong or it started doing something wrong. So I installed a fresh copy of Win-7 and ran the utility from there. It's going at the same snail's pace. I still think I must be doing something incorrectly - I don't see how it could possibly take so long, I could probably manually flip the on my hard drive and be done before that utility. Am I doing this correctly or is there something else I should be doing? Edit: In case my hardware is relevant: Win 7 64 bit Core i7 8 GB Ram 640GB Internal 1TB External connected via eSATA I had approximately 400GB of data on my computer before it crashed.

  Read the article

• Packet loss with all adapters on one PC only on the LAN

  - by Enigmativity

  I have a Windows 7 64-bit machine that is losing up to 20% of IP packets on both adapters - wireless & LAN. Browser traffic appears to be affected the most, but it is happening to all protocols. All other computers on the network are functioning fine. If I ping from my faulty machine to any machine on the LAN (wired or wirelessly), including the router/gateway and internet sites, I get up to 20% packet loss. If I do the following commands: ipconfig /release ipconfig /renew then I sometimes get my network performance back for a matter of a few seconds to less than a couple of minutes. Rebooting also works for a short period of time. This problem has been occurring for a couple of months and is getting worse. The computer used to work just fine. I updated the wireless adapter firmware the other day with no effect. Does anyone know what is happening?

  Read the article

• Windows 7 x64 CD to MP3 ripper

  - by marc_s

  I'm trying to find a good, simple CD-to-MP3 ripper to copy my physical CD's to my computer's hard disk. I'm running Windows 7 Professional x64 - and that appears to be a major problem. All the "usual" free- and shareware tools I've tried (CD-to-MP3, Visual MP3 and quite a few more) seem to have trouble with either 64-bit Windows, or with my HP CD/DVD built into my HP Compaq Elite 8100 machine. Does anyone have any good recommendations? I don't want to install a monster like iTunes - something really clean, small, simple would be fine. Free- or Shareware - if it works reliably and with good quality output, I'll be happy to register! Any hints are welcome!

  Read the article

• Unable to sync the Zune software with my HTC HD7

  - by Varpi

  I have a brand new HTC HD7 with Windows Phone 7, with no Software installed. I am running on Windows 7 64 bit. Whenever I try to sync my Mobile Device with Zune- I get this message: Can't connect to your phone. Disconnect it, restart it, then try connecting again I've downloaded latest Zune software and all updates. I don't have any certificates on my personal certificates. My phone is listed under Portable devices in Device manager (It shows as phone with driver version 4.7.965.0). I've restarted both my computer and the mobile device few times. I tried unlocking the device during the Zune sync Any ideas as to how I can sync my phone ?

  Read the article

• Laptop freezes on Wireless Mouse Adapter attach/detach

  - by Sergiy Byelozyorov

  I am using Microsoft Wireless Notebook Optical Mouse 3000 with Toshiba Satellite Pro P300-1CG. Recently I have installed Windows 7 64-bit. Now once in a while when I plug-in or plug-out wireless mouse adapter, the computer freezes (image stays on the screen, but the computer is not responsive). I have noticed that it mostly happens after I recover my computer from sleep mode. To continue using laptop I have to shut it down by pressing and holding power button for 7 seconds and then booting it up again. What can be done to prevent this?

  Read the article

• Windows Server 2008: Terminal Services

  - by JohnyD

  I have a Dell R710 with 72GB of memory running Hyper-V. Within Hyper-V I have a Windows 2008 (32-bit) VM running Terminal Services. How do I allocate memory so that any user who connects to this Terminal Server (from their thin-client) is allocated 2GB (or whatever amount I choose) of memory? Currently I have provisioned the TS with 2GB of memory but it seems that this is shared among all that connect. Please let me know if there is further information I can provide. Thank you.

  Read the article

• Having trouble with EPSON Stylus SX130 scanner

  - by pinouchon

  I am trying to scan files with an EPSON Stylus SX130 on windows 7 x64. When i plug in the printer, windows automatically find drivers for printing, but not for scanning. So i go to the manufacturer website to download the drivers, select windows 7 64-bit and download drivers for EPSON Scan. The install works fine, but when i try to scan a file (eg: from paint or Windows fax and scan), the folowing message pops up and freezes the application : the progress bar plays the animation forever and the application does not respond. I then have no choice to kill the application with the task manager. Do you have an idea of what's going on ? How can i fix the problem, ie: how do i get the scanner actually scan files without freezing ? I tried to install the driver from the CD given in the printer package, and got the same problem. The only help i found so far (the error seems somewhat related) is this : Install a xp virtual machine and run it in there

  Read the article

• Installing additional printer drivers (x86) on Windows 7 (x64)

  - by ambrax

  I've successfully installed Windows 7 (x64) and drivers for my Canon MP510, and have no problem printing with this setup. There is another PC in the network running XP SP3, and I want to share the printer so that users of that PC can also print. On W7 I have the option of installing additional printer drivers for other system architectures (Itanium and x86). I've downloaded the most current 32-bit drivers for the printer, but every time I direct the install dialog to the folder containing the drivers, I get the following error message: Selected printer driver not found The specified location does not contain the driver Canon Inkjet MP510 Printer for the requested processor architecture. Retry Cancel I'm stumped. I'm absolutely certain that the specified location actually does contain the correct drivers; I've even installed them on the XP system. I've tried everything I can think of. What am I overlooking?

  Read the article

• How to diagnose a Windows XP hard crash

  - by Jon

  I have a 64-bit Windows XP machine which has hard crashed several times today. The symptoms are that the screen just goes blank, then the reboot cycle starts. There is no blue screen and even though it is switched on, no crash dump file is created. On all occasions it has happened during a period of high CPU/memory activity. I have run a full Dell diagnostics with no failures. Any ideas how to track this down further? Thanks.

  Read the article

• Recover Bios HP DV9700T windows 7 64

  - by petebob796

  I downloaded the latest DV9700t bios (.59) and ran the update tool in windows 7 64. This seemed to go ok and did the usual system will shutdown in 10 seconds dialog. Updon the reboot nothing happens I get no BIOS screen or anything so I think the bios update went wrong. Which I am annoyed about I have never known a bios update to fail before and lots of people on the internet seem to have had the same problem with the same model. There is a way to recover apparently using crisdisk utility and creating a bootable usb key then holding win+b at power on, unfortunately the utility to make the disk doesn't seem to work in 64 bit versions of windows, the only type I have easy access to. Anyone know a way to create the boot disk in 64?

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• Network not detected, but internet working

  - by Dave

  I am using a brand new HP computer with Windows 7 64 bit. When I first hooked it up it detected my network (hooked up through ethernet) easily. However, after I uninstalled Norton Internet Security, it stopped being able to detect my home network. I can still use the internet as if connected, but I can't go into the network options to communicate with other computers. I had this same problem on Windows Vista on my previous computer. Is there any way to fix this so it detects the network?

  Read the article

• icons in windows 7 taskbar moving by themselves

  - by valya

  I'm using Windows 7 64 bit. Few days ago I pinned another one application to taskbar and moved it to the left side. But it moved to the right by itself! I tried to return it to the left side but it went to the right again. The same thing happens now with another application (I've uninstalled the application from the first paragraph - not because of a bug, I just don't like it). It's really annoying. I want it on the left side! How to lock it in? I don't know why but it have (2) in the taskbar shortcut's name: 'Mindjet MindManager 8 (2)'

  Read the article

• Can't rename folders in Window 7/32bit after anti-virus change

  - by Tasos

  I recently started having the common, as I realized, problem of not being able to rename folders in Windows 7 (32 bit). I don't understand why it happened after almost a year of ideal use of Windows 7. I haven't removed the libraries nor can I think of anything else that could potentially cause this, at least as far as I know. The only thing I did recently was to change my anti-virus program from the freeware version of Avira to the freeware anti-virus Microsoft Security Essentials. Any idea on what the problem is and how to fix this?

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >