Search Results

Search found 30308 results on 1213 pages for 'dont ask'.

Page 51/1213 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Grub2 -- Dualboot Ubuntu LTS 12.04 and Windows 7 -- Detects two Windows 7 (loader) entries

  - by DarkIron112

  this is the first question I have ever asked the Ubuntu Community. :D I'm fairly new to Ubuntu, but I understand the basics and know how to navigate the Terminal. I also know how to ask for/research my problems before asking for/ help. I have scoured the internet high and low and learned much of how Grub2 works. But nothing has helped me to solve my problem. My problem is this: I have a computer that has three hard drives. It previously had Windows XP, but I upgraded to Windows 7. I also installed Ubuntu 12.04 LTS (Precise Pangolin). During my installation of Windows 7, there was a failure and I had to restart the installation. Afterwards, I installed Ubuntu. After some trouble removing all traces of the XP OS (Ubuntu auto-detected it, but not Windows 7) I got the two OSes working flawlessly. Or, almost. When booting up, Grub2 used to display Ubuntu, Ubuntu Recovery Mode, Other Versions of Linux, memtest, followed by "Windows 7 (loader) on /dev/sda1" and "Windows 7 (loader) on /dev/sdb1". I eventually removed Recovery Mode, Other Versions, and Memtest. Now, when I run: sudo update-grub I get this print-out: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found Windows 7 (loader) on /dev/sda1 Found Windows 7 (loader) on /dev/sdb1 I would like to remove "Windows 7 (loader) on /dev/sda1", as it is a broken entry that shouldn't exist, and must have been installed during my first Windows 7 attempt. I cannot find a Windows 7 entry in /etc/grub.d... And I don't know where to look. Here is a layout of my hard drives: /dev/sda1/ (1.82 TiB), NTFS ("Media") /dev/sdb1/ (100 Mib), NTFS ("System Reserved") /dev/sdb2/ (149 GiB), NTFS ("Windows 7") /dev/sdb3/ (149 GiB), Extended (" ") /dev/sdb4/ (145 GiB), ext4 (" ") /dev/sdb5/ (4 GiB), linux-swap (" ") /dev/sdc1/ (488.28 GiB), NTFS ("Downloads") /dev/sdc2/ (488.28 GiB), NTFS ("AltMedia") /dev/sdc3/ (886.45 GiB), NTFS ("Personal") unallocated (2.09 MiB), unallocated What I think has happened: Windows 7 installed first and badly. I installed it again. First, there was Windows XP to guide where the bootloader went to so it was put on /dev/sdb1/. But, the second time no such guide existed so the machine put another bootloader on /dev/sda1/. sda1, by the way, is the only partition on a 2TB drive. No boot record partition appears to exist according to gedit. I'm not sure where Grub2 is getting this information from. But, there it is. Is there anything somebody can do to help me? Or, is there any more information I should add? Thank you, community!

  Read the article

• Bluetooth Dial-Up Networking using Blueman

  - by leemes

  I want to configure a dial up network connection via bluetooth to my phone in order to access the internet. I use Lubuntu 12.04 (Ubuntu with LXDE) which has the Network Manager Applet and Blueman applet installed. I guess these are the same tools than on an Ubuntu installation, hence I ask my question on this site. My phone is a Sony Ericsson W810i, my laptop is a Lenovo S10-2, my mobile phone provider is o2 Germany. I scanned for my mobile phone using the Blueman applet. I connected the dial-up network via the context menu - Serial Ports - Dial-up Networking. A notification bubble says that the connection is available on the interface named ppp0. ipconfig is telling something different: There is no ppp0 or something similar. I only see my eth0 (wired ethernet), eth1 (wifi) and lo interfaces. Of course, I can't ping google.com as the interface really seems to be not present at all. When the dial-up network is being connected, my mobile phone says that it connects to the internet. Afterwards, I see the active connection on the phone's screen. When successfully connecting with the phone using another computer, it behaves exactly the same, so I guess that the phone isn't the problem. I don't know if I configured the Dial-Up correctly. I use the phone number *99# which is very common on most mobile ISPs. I use the APN which my ISP is telling me to use. (I can't find the number on their support page, so I just use the default value *99#.) My mobile ISP is o2 Germany. There are How-Tos out there which use the Network Manager Applet to setup a bluetooth dial-up connection, but I can't see any bluetooth devices in the context menu as on the screenshots in those How-Tos. Do you have any suggestions what might be wrong / what I should try? EDIT: When choosing "Network Access Point" in the device's context menu instead of Serial Ports - Dial-Up Networking, an interface bnep0 appears. However, neither an IPv4 address is assigned for that interface (but IPv6), nor the phone connects to the internet. Am I missing something? Can I connect to the internet after setting up this network connection?

  Read the article

• Media keys play/pause globally worked in 12.10, not in 13.10

  - by Stéphane Gourichon

  Laptop media keys On Asus n55sf laptop, there are a dedicated keys for volume up, volume down, mute, [play/pause], stop, launch (plus a dozen Fn-key combinations). In 12.10 most worked. (Overall is seems unrelated to desktop environment used, stating it for the sake of completeness.) On Ubuntu 12.10 under XFCE they just worked. That is: when a player like rhythmbox or totem was started, it would alternate between play and pause. Interestingly, if several were started, they would alternate independently. E.g. use mouse to pause rhythmbox, launch totem, and one hit on [play/pause] key would pause one and resume the other. Keys Next,Previous and Stop worked as expected in any program. In 13.10 most still work, but play/skip related ignored. On Xubuntu 13.10 (XFCE too) the volume keys work but the [play/pause], stop, next and prev are ignored. Not tried regular Ubuntu 13.10 (Unity). Search before you ask Here are a few facts: https://wiki.ubuntu.com/Hotkeys/Architecture is ummutable and mentions Ubuntu 9.10. https://wiki.ubuntu.com/Hotkeys/Troubleshooting is also outdated as it mentions /usr/share/doc/udev/README.keymap.txt which no longer exists. On 12.10 and 13.10 versions, at XFCE level (as visible by xfconf-query or using xfce4-settings-manager) there are a couple of shortcut for keys like XF86Calculator or XF86TouchpadToggle but nothing related to volume prev/next/play/stop, which is okay. XF86Audio substring doesn't appear in /etc (which is normal) Kernel-level test: "showkey -s" on console shows that keys Next,Play/Pause,Previous,Stop are keycodes 163,164,165,166. Nothing relevant in /etc about that. Reports https://bugs.launchpad.net/ubuntu/+source/udev/+bug/1072371 and https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1012365 suggest to adjust at udev level. Alas, the udev tutorials I found ( e.g. https://wiki.debian.org/udev ) don't even mention keyboard. A thread in french seems to deal with a similar issue: https://forum.ubuntu-fr.org/viewtopic.php?id=1395051. @sudo evtest /dev/input/event3@, in X as well as on plain console, reports events on key pressed and repeats, but nothing when pressing those media keys. Is udev a dead end ? Questions How did it work in 12.10 ? Through udev ? Something else ? Any other hint ?

  Read the article

• Importing PKCS#12 (.p12) files into Firefox From the Command Line

  - by user11165

  I’ve posted this question up on #Ubuntu and #Firefox Forums, and really could do with some help.. Anyone know where i could look or help with the answer. I’m hoping the power of social media will come through… I have a need to perform the following action: Firefox 3.6.x: Quote: open Edit - Preferences - Advanced - Encryption - View Certificates - Your Certificates - Import However i need the same functionality from the bash command line. So far I’ve established that the following command is supposed to be used: Quote: certutil -A -t “u,u,u” -d /home/df001/.mozilla/firefox/qe5y5lht.tc.default/ -n “mycert” -i client.p12 This executes with no isses, however, doesn’t show up in any Firefox Certificate store. However, I have noted that prior to running this command, i have a cert8.db key3.db and secmod.db file in the above folder. After running the command the certutil seems to have created a cert9.db, key4.db and pkcs12.txt file Listing the contents using the command: Quote: certutil -L -d sql:/home/df001/.mozilla/firefox/qe5y5lht.tc.default/ does seem to confirm my attempts of importing files into a certificate folder of some kind have worked. because i get Quote: Certificate Nickname Trust Attributes SSL,S/MIME,JAR/XPI Thawte SSL CA „ Go Daddy Secure Certification Authority „ Thawte SGC CA „ Entrust Certification Authority - L1C „ My Nero CT,C,c mynero P„ davidfield - Internet Widgits Pty Ltd u,u,u So, having tried this, and heading back over to the www, i cam across this command: Quote: pk12util -d /home/df001/.mozilla/firefox/qe5y5lht.tc.default/ -i client.p12 -n “David Field” -P “cert8.db” this again, appears to be importing something somewhere, however, again, Viewing certs from the Firefox interface doesn’t show the imported Cert. I’m surmising here on reading that the certutil and pk12util are creating a new NSS database, which firefox isn’t reading. So my question is, how can i get the p12 cert from the command line so it displays in the firefox Certificate manager interface? Why have i posted this here? Why not post on the firefox forum? Well i will copy and post the same question there as well, however the ability to use the command line to do this is important, as I have potentially 2000 machines which will need a user cert imported into firefox via a p12 file. I need to do this in the form of a script, i thought the hard part was going to be making the p12 file from the microsoft 2003 CA, turns out thats easy. I can’t just import via the GUI and copy over cert8.db x 2000, i can’t ask users to use the CA webinterface as its for VPN access, the users are off site, and they need the VPN to get to the cert server.. Is there any person out there who can help? By the way, i don't have the tor buttun installed.

  Read the article

• Brightness Crash and Fan issues in 12.04.1

  - by S.A. McIntosh

  I would just like to state beforehand that I am a total novice in using Ubuntu when it comes to the more complex issues. So I thought it would be best to finally come here and ask for help before being re-directed or closed out for a solution. I have already looked high and low on this board for one but nothing came up for my particular case, so I might as well take a shot asking for the first time here. This is what I have at the moment: -Dell Insprion 1764 w/ 64-bit Intel i5 Core -Dual Boot: Windows 7/Ubuntu 12.04.1 32-bit (from 12.04 install) -Unity shell -Linux kernel: 3.2.0-32 generic-pae ...and this is my fglrxinfo: OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 5000 Series OpenGL version string: 4.2.11627 Compatibility Profile Context The one issue I have with using Ubuntu is brightness. With the driver in every time I use the slider in the brightness and lock settings or use the keyboard function, it freezes, goes black and comes up with a scrambled colors page like this in the video. So I have looked all over this board and the web for answers looking for a solution that might have an answer. This is what I have done so far to fix this: -First Solution: Looking around, I found this small fix using terminal: sudo gedit /etc/rc.local followed by adding this into "rc.local" echo # > /sys/class/backlight/acpi_video0/brightness This works rarely with the graphics driver still in and I often get lucky say during restart but reboot would only snap back the brightness at max. -Second Solution Simply remove the graphics driver while leaving the solution of first behind. This solves the issue but results in having the monitor flicker and flash at startup which in itself is not a problem to me but maybe not so good for monitor health. Also it causes the fan to speed up throughout the session and render any program that needs the driver useless. -Third Solution This is the most obvious. Just simply use the brightness on AMD Catalyst Control Center software that came with the driver, and I can say that it's form of brightness is HORRIBLE compared to the actual settings. Which leads up to where I am now, back to the driver to stop the fan speed-up and seems that the only solution to the brightness crash is to use the keyboard-controlled brightness at the login screen NOT the desktop if I want the issued effect but will just snap at max bright again if I restart. Fan speed problem is dealt with but now run the risk of crashing my computer if I so much touch the brightness settings. Speaking of which I found this on launchpad and it seems that the issue has been going far since June of 2012. Any help, redirect link or reference would be greatly appreciated. Thank you.

  Read the article

• Display Driver Issue on an hp TX2-1160ea Notebook

  - by Sam

  I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

  Read the article

• Executable execution path. Does it depends of the place the executable is called from?

  - by Valkea

  as I'm still a new Linux user, I still discover some behaviours and I'm unable to tell if they are "normals" or not. I searched the Internet but as I can't really find an answer I guess it's time to ask here. Few weeks ago I installed a small game called "Machinarium" and I played it... but few days later when I wanted to continue my game I was unable to make the game start correctly. And as I didn't had the time to search I given up. But yesterday as I was working on a program of mine, I had the exactly same behaviour. So I searched a bit and I discovered that when using Nautilus with the "List view", I was able to run the program (ie: the program does find the sound, images etc resources) when I was literally "inside" the executable folder, but unable when I was in a parent folder and expanding it to the executable folder to run it. To illustrate the behaviour here are two screen shots. It doesn't works if the executable is double clicked from here It does works if the executable is double clicked from here This is indeed the same "place", but the Nautilus view is slightly different as the current folder is not the same and it seems to make a difference for the program. Furthermore, when I create a menu items via System Settings/Main Menu to the executable, it behaves just like if the executable can't find the resources (that's why I was unable to play Machinarium the second time as I created a menu short-cut after my first game). So I asked my program to generate a text file at it's root when running, and I started to launch it from different "parent" folders to see where is generated the text file. Each time the file was generated on the top folder of the current Nautilus view. I was expected to see it appears in the same folder of the executable (well not as I was guessing what as happening, but before that I would have expected to see it appears in the exe folder). Does anyone can explain me why it does works like this (I guess it's normal) ? How I'm supposed to solve this when creating programs (Should I detect the executable path in my C++ code or should I organize the resources files another way than on windows ?)

  Read the article

• Cannot install packages. "Warning: untrusted versions..." plus "method driver /usr/lib/apt/methods/http could not be found"

  - by Steve Tjoa

  Judging from Internet forums, these errors appear to be popular when attempting to install packages: steve:~$ sudo aptitude install examplepackage The following NEW packages will be installed: examplepackage examplepackage-common{a} 0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 1,834 kB of archives. After unpacking 7,631 kB will be used. Do you want to continue? [Y/n/?] WARNING: untrusted versions of the following packages will be installed! Untrusted packages could compromise your system's security. You should only proceed with the installation if you are certain that this is what you want to do. examplepackage examplepackage-common Do you want to ignore this warning and proceed anyway? To continue, enter "Yes"; to abort, enter "No": Yes E: The method driver /usr/lib/apt/methods/http could not be found. E: The method driver /usr/lib/apt/methods/http could not be found. E: Internal error: couldn't generate list of packages to download I followed this post by uninstalling ubuntu-keyring. But I cannot reinstall ubuntu-keyring or ubuntu-minimal -- the above errors reappear. In fact, I don't even seem to have apt (I must have caused this along the way by trying a bad solution, or maybe a clean): steve:~$ sudo apt-get update sudo: apt-get: command not found Aptitude works, but I can't install apt: steve:~$ sudo aptitude install apt The following NEW packages will be installed: apt 0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 1,046 kB of archives. After unpacking 3,441 kB will be used. E: The method driver /usr/lib/apt/methods/http could not be found. E: The method driver /usr/lib/apt/methods/http could not be found. E: Internal error: couldn't generate list of packages to download ...or update steve:~$ sudo aptitude update E: The method driver /usr/lib/apt/methods/http could not be found. E: The method driver /usr/lib/apt/methods/http could not be found. E: The method driver /usr/lib/apt/methods/http could not be found. I tried this post. Didn't help. To summarize, the main problem is that I cannot install anything. While attempting to fix the problem, the other aforementioned errors occurred. Can you help me fix this error? Feel free to ask if you need more information. Stats: steve:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric

  Read the article

• No sound after clean install 11.10

  - by Jorge

  First of all, sorry to ask this, I'm sure that this was asked so many times before. Second, sorry for the English, it's not my native language. And Third, thank you in advance. So, I hope the follow info will help, here's a log. http://www.alsa-project.org/db/?f=07089caf530494bc4bc23e1d1cd56b3a5fae03c6 I already check 'System - Preferences - Sound'. Here's a screenshot http://i.imgur.com/Ghwnj.png > jorge@jorge-desktop:~$ sudo lshw -class multimedia > *-multimedia > description: Multimedia audio controller > product: VT8233/A/8235/8237 AC97 Audio Controller > vendor: VIA Technologies, Inc. > physical id: 11.5 > bus info: pci@0000:00:11.5 > version: 60 > width: 32 bits > clock: 33MHz > capabilities: pm cap_list > configuration: driver=VIA 82xx Audio latency=0 > resources: irq:22 ioport:e400(size=256) Tried with no results: > sudo apt-get remove --purge alsa-base > sudo apt-get remove --purge pulseaudio > sudo apt-get clean && sudo apt-get autoremove > sudo apt-get install alsa-base > sudo apt-get install pulseaudio > sudo apt-get install ubuntu-desktop Also > sudo gedit /etc/default/grub > > from: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" > > to: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" > > sudo update-grub > > And Reboot... without any result. EDIT: I made sure that everything it's fine with aplay -l and lspci -v and lsmod; and checked alsamixer, it's not in mute. Well I'm running out of ideas. Thanks.

  Read the article

• What do I need to do, to get placed in any software company?

  - by Anto Aravinth

  I'm doing my 3rd year CSE Engineering. I guess this is the right time to ask this question! As in the next year, I'm going to do projects, "get my hands dirty". And there is only few days left out, as I know many people in Stack Overflow are working in Software field, I thought to ask these question. Does the project that I'm doing in my final year need to be excellent? If so, what kind of project to do? And how do you say that the project is excellent or not? Writing the code is very fun and serious at times. But the code should have a good algorithm? And mostly in any software companies interview, what kind of question they ask? Not but not the least, mastering in any particular language speaks in interviews?

  Read the article

• How to deal with social login

  - by Matteo Pagliazzi

  In my new web app I'm going to allow social login through Twitter (maybe), Facebook and Google and I'm in search of the best way to do it. Actually I'm using Rails with Devise + Omniauth and this is the problem: Should I ask the user to choose a password so that he can login without a social network? Or maybe the user should be able to set a password if he want (for example when editing his account?) The second way seems the best one but since Twitter doesn't provide user email and google doesn't provide an username I'll probably have to ask the user for username/email when he log in so in that case I may also ask for the password... waht do you think?

  Read the article

• Full disk encryption with seperate boot and encrypted keyfile storage: Two-Form Authentication

  - by Cain

  I am trying to setup true Full Disk encryption with two-form authentication on 12.04 and can not find out how to call a keyfile for the encrypted root out of another encrypted partition. All documentation or questions I am finding for whole or full disk encryption only encrypts separate partitions on the same disk. This is not what most are calling full disk encryption, /boot is not on a partition on the root drive, rather it is on a usb stick as sdx1. Instead root is on a logical partition on top of a LUKS container. Luks is run on the whole disk, encrypting the partition table as well. All drives in the machine are completely encrypted and to open it it requires a USB drive (what I have) as well as a passphrase (what I know) resulting in Two-Form Authentication to boot the machine. Device sdx cryptroot vg00 lvroot / There is no passphrase to open the encrypted root device, only a keyfile. That keyfile is kept on the usb drive with /boot, in its own encrypted partition (I'll call this cryptkey). In order for the root file system (cryptroot) to be opened, initramfs must ask for the passphrase to cryptkey on the usb drive, then use the keyfile inside that to open cryproot. I did manage to find what I think is the how-to I used to do this once before: http://wiki.ubuntu.org.cn/UbuntuHelp:FeistyLUKSTwoFormFactor I already have the system installed and can chroot into it, however, I can not get it to call for the keys on the USB during boot. I did find a how-to saying I needed to make a cryptroot conf for initramfs but, I believe that is for a passphrase: https://help.ubuntu.com/community/EncryptedFilesystemLVMHowto#Notes_for_making_it_work_in_Ubuntu_12.04_.22Precise_Pangolin.22_amd64 I also tried to setup crypttab. However, crypttab only works for drives mounted after the root drive as calling for a keyfile on a device not yet mounted to the system doesnt work. The Feisty how-to included scripts that would be run during boot instructing initramfs to mount the usb drive temporarily and call the keyfile for root which worked quite well except those scripts are outdated now, many of the things they relied on have been merged into something else, changed, or simply don't exist anymore. If I have missed a clear how-to for this, that would be wonderful, I just don't think I have.

  Read the article

• Cannot get 3D OpenGL support in Vmware guests, how can I fix this?

  - by jjapol

  I have been working at this problem for 2 days now. I cannot for the life of me enable 3D support in VMWare 9 guests. My specifications are: Hardware: Dell Latitude E5520 laptop. Processor: Intel i7-2620M CPU @ 2.70GHz × 4. Memory: 8GB. Video: Intel Sandybridge Mobile x86/MMX/SSE2 OS: Ubuntu 12.04.1 LTS, 32 bit. Vmware Workstation: 9.0.1 build-894247 Glxgears functions fine. Frame rate is ~60fps. Vmware guest: Windows 7 Starting the Windows 7 guest in VMware throws the following errors: No 3D support is available from the host. and Hardware graphics acceleration is not available. I've read through this VMware forum thread, but again the hardware in the post is different (nVidia). I've followed the instructions at this Ask Ubuntu post as closely as possible as the question is nearly the same as mine although my hardware is different. Answer 1 regarding setting mks.gl.allowBlacklistedDrivers = TRUE; in my vmx configuration file causes the VM to crash when it starts. The second answer I followed as closely as possible. I uninstalled VMware, Did sudo apt-get install build-essential linux-headers-$(uname -r) at a terminal, Added the PPA https://launchpad.net/~glasen/+archive/intel-driver, Then at a terminal did sudo apt-get update && sudo apt-get upgrade -y I reinstalled VMware and have the same results: no 3D in guests. I'm getting the feeling that something is awry with the Sandy Bridge driver, but I can't seem to come up with any solutions. Has anyone out there run across this problem also? By the way, the operation of the likes of Solidworks and AutoCad within a Windpws 7 guest does appear to be improved in VMware 9 vs VMware 8 in spite of the fact that 3D support is lacking in the Windows 7 guest. I'd also add that my glxinfo file was nearly identical to the glxinfo file posted at askubuntu.com/questions/181829/…. I had a total of seven minor differences per a comparison using Meld. –

  Read the article

• HDMI sound gone, can't figure out how to turn it back on

  - by Oli

  I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

  Read the article

• How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

  - by CandN

  Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

  Read the article

• Live CD has black screen HP DV6

  - by Shaun Killingbeck

  Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

  Read the article

• my probleme about "The installation or removal of a software package failed"

  - by tulipelle

  Recently, when I open Ubuntu software center, it ask me repair package Then I found this message . installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 569135 files and directories currently installed.) Unpacking linux-image-3.5.0-42-generic (from .../linux-image-3.5.0-42-generic_3.5.0-42.65~precise1_amd64.deb) ... Done. dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65~precise1_amd64.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./boot/vmlinuz-3.5.0-42-generic': No space left on device No apport report written because the error message indicates a disk full error dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65~precise1_amd64.deb Error in function: dpkg: dependency problems prevent configuration of linux-image-generic-lts-quantal: linux-image-generic-lts-quantal depends on linux-image-3.5.0-42-generic; however: Package linux-image-3.5.0-42-generic is not installed. dpkg: error processing linux-image-generic-lts-quantal (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic-lts-quantal: linux-generic-lts-quantal depends on linux-image-generic-lts-quantal; however: Package linux-image-generic-lts-quantal is not configured yet. dpkg: error processing linux-generic-lts-quantal (--configure): dependency problems - leaving unconfigured

  Read the article

• What is the best C++ interview question?

  - by David Thielen

  If you could ask a C++ programmer one question to measure their C++ skills, what would it be? The question I think is best is: Can you call "delete this;" inside a member function? (I put this as a link so you can think it through first, then go to The Best C++ Interview Question – Ever! to see the correct answer.) I don't ask this because I expect most people to know the answer. If they did it would not be that useful a question. I ask to see if they can work their way to the correct answer and how they do so.

  Read the article

• Lubuntu wireless issue with Broadcom chipset

  - by Variant Web Solutions

  I'm a web dev that just started a new venture in buying wiped laptops in bulk and selling them at a low cost to lower income families that want a laptop that will simply preform and not become virus ridden and require constant maintenance, so naturally I opted for a linux distro and after some research, lubuntu was my top pick. I'm not a stranger to linux as all of my servers for my web dev business are linux, but I am however new to L/Ubuntu and I'm having some issues with both wifi (broadcom chipsets) on the 20 or so dells that I have right now, D800's, D810's and E5400's. Not sure if you can point me in a solid direction, I've scoured (and implemented) the suggestions on ask ubuntu and still coming up short. On one of the e5400's ( though they all seem to suffer the same errors) I got the following: [code]dell-latitude-e5400@dell-Latitude-E5400:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell-latitude-e5400@dell-Latitude-E5400:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10) dell-latitude-e5400@dell-Latitude-E5400:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.5-1ubuntu1 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm nfc dell-latitude-e5400@dell-Latitude-E5400:~$ [/code]

  Read the article

• Problem with OpenGL or Unity, need Gnome fallback mode

  - by William Wind

  This question is in two parts, and I have been searching the web for days to find answers. With no luck I thought I'd drop by and ask for your help. Here goes: 1.) I'm running Ubuntu 13.04 and one day last week Unity suddenly wound't work. After the login screen, I was either faced with an all black and non-responsive screen, or sometimes it booted and I could see my desktop wallpaper (and add and remove icons/folders from the desktop). But there was no menu in the left hand side and no top bar :-( However I could still enter the terminal. I borrowed my dad's laptop and looked for a solution online. About two days later I gave up (I'm still kind of a n00b at Linux) and found a way to install Gnome Fallback, via the terminal. When I used it, I had the same problem. [clue #1] Missing menues. But if I rebooted into Gnome Fallback mode with no effects. It worked. Great! I have used that for some days now, while still trying to fix the original problem with either Unity or OpenGl or whatever went wrong in the first place. With no luck. After giving up on my search for a fix (I know that came out wrong) -- I decided to reinstall Ubuntu 13.04 from a CD. But! After that I was left where I began. When booting into my account, it only shows the desktop wallpaper and the icons. I can click and enter the folders, but not go into the menues. Last time I fixed it with Gnome Fallback mode, because I could enter the terminal and the PC was automatically online, via wireless network. But not this time, I can't get online. So: 1.) How do I via the LiveCD Ubuntu version (the one I'm using right now) install Gnome Fallback unto the harddrive based system? 2.) If impossible. How can I access the wireless Internet via the terminal, so I can install Gnome Fallback, from the "broken" Unity session. 3.) Is there any other things that I should try? Please help me, PS: My GFX-card is an ATI Radeon something and I have install and used the "Redwood" drive (I think its called) for many weeks prior to the shutdown.

  Read the article

• How are components properly instantiated and used in XNA 4.0?

  - by Christopher Horenstein

  I am creating a simple input component to hold on to actions and key states, and a short history of the last ten or so states. The idea is that everything that is interested in input will ask this component for the latest input, and I am wondering where I should create it. I am also wondering how I should create components that are specific to my game objects - I envision them as variables, but then how do their Update/Draw methods get called? What I'm trying to ask is, what are the best practices for adding components to the proper collections? Right now I've added my input component in the main Game class that XNA creates when everything is first initialized, saying something along the lines of this.Components.Add(new InputComponent(this)), which looks a little odd to me, and I'd still want to hang onto that reference so I can ask it things. An answer to my input component's dilemma is great, but also I'm guessing there is a right way to do this in general in XNA.

  Read the article

• Ubuntu is booting on acer e1-510 laptop, but screen displays nothing

  - by user287602

  Tried loading ubuntu 12.04 (32-bit as well 64 bit) through bootable usb , on a brand new 64-bit acer E1-510 laptop. It shows the 'Try ubuntu without installing screen' and I selected that option. But instead of showing ubuntu's logo(which implies it is loading). I get a blank screen. The screen is on, but it shows nothing. I tried the same on an old model laptop acer aspire 5738 and it worked like a charm. However, I realized that Ubuntu is actually booting on E1-510 and only the display is not working. How did I arrive at this conclusion? When I select on 'Try ubuntu without installing screen', after about 8-10 seconds I see that the WiFi indicator light on the laptop panel switches on(just like when we boot up a Windows OS or even Ubuntu ). I got an idea that the system booted Ubuntu. To confirm this, I tried to adjust volume using keyboard shortcuts. Voila, I can hear the sound of adjusting volume! That means it has already booted Ubuntu. I confirmed this with another step. I pressed the power button once and after two seconds I pressed ENTER. It began the process of switching off and within 5 seconds the laptop was powered off. You may ask, Why is this a confirmation that Ubuntu has booted? This is because in Ubuntu when you press on power button, a dialog box opens with shut down, restart, suspend option- and the shut down option is already selected by default; so all I have to do is press ENTER to shut down. This again proved that Ubuntu was indeed up and running. Unlike previous 'AskUbunutu' posts about Acer e1-510, I must mention that my laptop came WITH the Legacy BIOS mode, so its not really a problem to boot ubuntu from a bootable pendrive. Only the screen is not working. In case you need to know, I am running Windows 7-Ultimate 64 bit on acer e1-510.

  Read the article

• What is 'Ubuntu Unity' (for the Desktop)?

  - by Martin

  Ok, so there's the buzz of Canonical (wanting to) switch for new Ubuntu version from the GNOME default desktop to their own Unity shell. (I hope that's accurate.) It seems I can not totally fathom what Unity actually is. For looking at its homepage it currently is firmly targeted at netbooks and the somehow different usage model on these. Is it a classical desktop? -- Taskbar? Shortcuts? Is the difference between Ubuntu(GNOME)+Unity more/less pronounced than the difference between Ubuntu and Kubuntu? Will "my parents" be able to get the interface if they've been using the classical gnome desktop so far? Edit: I would not like to split this up into more specific questions, as What is Unity? is exactly what the people I set up Ubuntu boxes for will ask me if they hear that the newer Ubuntu version is using that instead of the Desktop -- and it might well happen someone phrases it like that :-) I will certainly not give them the link to the HP as the explanation there does not lay out if it is a desktop or something more or something less: (It does not for me - therefore I'm asking here.) Unity is designed for netbooks and related touch-based devices. It includes [...] that makes it fast and easy to access [...] while removing screen elements that are rarely used in mobile and netbook computing. (emphasis mine) -- the explanation there doesn't even mention the desktop-PC! Unity has a vertical task management panel on the left-hand side and a menu panel at the top of the screen. [...] This sounds like a re-themed normal desktop. Clicking on an icon will give the target application focus if it is already running or launch it if it is not already running. If you click the ... Aha. Sounds like Windows 7. ... icon of an application that already has focus, Unity will activate an Expose-style view of all the open windows associated with that application. No clue what that's supposed to be. So it would really be nice if someone could explain for non desktop-design-terms experts what Unity is.

  Read the article

• Building SANE from git-source produce backend missmatch on 12.04 even if built locally

  - by deinonychusaur

  It seems to me that with Ubuntu Precise Pangolin it is all but easy to do a proper install of SANE from source (git-repo). I've found other scanning issues trying to find an answer to this, where the output people posted seems to indicate they suffer the same issue (unknowingly). If I run on a fresh install of Ubuntu 12.04 with compiled SANE source from the git I get: $ scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.22 (I basically followed the instructions on http://ubuntuportal.com/2012/02/how-to-get-an-canon-canoscan-lide-100-scanner-to-work-in-ubuntu-11-10linux-mint-12.html since I didn't find any other information making sure that sane was not installed prior to installation.) My primary interest is the epson2-backend. In 1.0.22 it offers the wrong TPU settings for Epson V700 (TPU2-mode wasn't supported in 1.0.22, and the scanner is useless to me if I don't have the TPU2-support). Since if I ask it to enter transparency mode, it shows 1.0.22 behaviour, it implies that the epson2-backend comes from 1.0.22 and not 1.0.24 even though I just built it. If I install SANE with prefix to a local folder and run that version of scanimage it still produces the mismatch. However, on another computer where I installed a custom 1.0.22 build of SANE prior to upgrading to Ubuntu 12.04, I can build and install the same SANE-git locally and have it correctly match backends: $ ./SANE/bin/scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.24 $ scanimage -V scanimage (sane-backends) 1.0.22; backend version 1.0.22 On this computer the 1.0.24 works correctly in finding TPU2 on Epson V700. So what am I missing/doing wrong? (And I want to replace 1.0.22 with 1.0.24 for the whole system, the local build was just debugging.) Any help would be much appreciated. Edit 1: Just tried compiling SANE using this instruction on Ubuntu 10.04 and it worked like a charm. However, when I upgraded to 12.04 (really would like to run 12.04), SANE was downgraded to 1.0.22. When trying the same set of instructions on 12.04 I was still out of luck -- the backend missmatch was there again (and I do have libusb-dev installed) Edit 2: I updated to Ubuntu 12.10 which now has the 1.0.23 SANE drivers. I haven't dared trying to compile from source on 12.10 since 1.0.23 is good enough for me. This is just a work-around and I would still like to know what's up with Ubuntu 12.04.

  Read the article

• Why is it always "what language should I learn next" instead of "what project should I tackle next"?

  - by MikeRand

  Hi all, Why do beginning programmers (like me) always ask about the next language they should learn instead of asking about the next project to tackle? Why did Eric Raymond, in the "Learn How To Program" section of his "How To Become A Hacker" essay, talk about the order in which you should learn languages (vs. the order in which you should tackle projects). Do beginning carpenters ask "I know how to use a hammer ... should I learn how to use a saw or a level next?" I ask because I'm finding that almost any meaningful project I'm interested in tackling (e.g. a web app, a set of poker analysis tools) requires that I learn just enough of a multitude of languages (Python, C, HTML, CSS, Javascript, SQL) and frameworks/libraries (wxPython, tkinter, Django) to implement them. Thanks, Mike

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >