Search Results

Search found 10161 results on 407 pages for 'dual boot'.

Page 51/407 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • Problem booting Windows after failed installation Ubuntu 12.04 alongside Windows 7

    - by Tassos
    I tried to install in my laptop Ubuntu 12.04 so that I can dual-boot with Windows 7. I made some mistakes during this process and I didn't manage to install Ubuntu. But my real problem now is that I'm afraid that I also destroyed the installation of Windows 7. Your help would be precious for me. Here are the details of what I did: 1) I followed these instructions to dual boot Ubuntu 12.04 and Windows 7: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ The only difference from what is described above, is that in my case the device names where: /dev/mapper/isw_fdjdhbadc_Volume0* instead of: /dev/sda* Note that I had created a bootable USB stick to do that. 2) The installation proceeded normally, but in the end I got a fatal error because the grub-install failed. 3) Then, after googling this problem, I runned ubuntu from the USB stick and run this command: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0p5 (/isw_fdjdhbadc_Volume0p5 was the partition that I had made for /boot) but this command also failed. 4) Then, I did something stupid (I think): I run the above command as: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0 namely I tried to install grub in the device isw_fdjdhbadc_Volume0 instead of the boot partition isw_fdjdhbadc_Volume0p5 The above command did not fail and was executed ok. 5) After that, I tried to boot my laptop, but it seemed that I had no operation system. Not even windows were detected. 6) I thought that I should uninstall grub from isw_fdjdhbadc_Volume0. So following some online instructions that I found, I booted again Ubuntu from the USB stick and run the following command (this was stupid since the instructions were for a totally different case than mine): sudo dd if=/dev/zero of=/dev/mapper/isw_fdjdhbadc_Volume0 bs=446 count=1 Afte that, I was still unable to boot Windows. I realize that I deleted something that I shouldn't, but I'm hope that this is not crucial and I can recover somehow. When I boot Ubuntu from the USB, I can see that the partition with Windows is still there, with all the directories, Windows files, my data etc. So, my question is: Is there a way to undo the mistakes that I desribed above and recover Windows 7? This is my major question. After solving that, I'd also like to know what I did wrong with the installation of Ubuntu. Thanks in advance for you valuable help!

    Read the article

  • Dell inspiron 1525 laptop won't boot up.

    - by Becca
    It comes to a page called "Dell Media Direct" and then loads another page where it says "A problem has been detected and windpws has been shut down to prevent damage to your computer." then it has a bunch of info about why it may be the cause. can someone please help?

    Read the article

  • OS X Snow Leopard fails to boot after upgrade to 10.6.1

    - by pixeline
    I'm a fairly recent mac user. Been using windows for decades and happily switched. But i upgraded from 10.6 to 10.6.1 last night and the upgrade looks like it failed. I restarted the machine when it asked to then went to bed. In the morning the computer was still trying to shut itself off. So i forced the shutdown, restarted, but now i'm stuck with the loading spinner. What can i do? UPDATE: Verbose didn't show anything interesting. i also did the hardware test. Nothing comes up wrong. Disk utility did not find any error on the HD. But, it did show a fatal error when checking permissions.

    Read the article

  • Making a Live Thumb drive boot with Persistent files, settings AND *drivers* that load on boot?

    - by Luke Stanley
    I have seen https://wiki.ubuntu.com/LiveUsbPendrivePersistent but it's a mess. What methods support persistent drivers as well as files and settings and don't screw up lifespan of the flash drive? I'd like to see your personal recommendations on say, Portable Linux, USB Creator, Remastersys + Unetbootin, etc Backstory: I have a Inspiron 1525 that's hard drive has been slowly dying. I want to switch to a live USB/CD/DVD system until I can get it repaired but my laptops internal wifi device requires a network connection by another means for Xubuntu to let it work, and then I have to enter my Wifi key again, and THEN I have to reinstall Skype etc... I'd be damned every time I have to shut the laptop down. I'm ok with making a shell script for installing apps and copying settings as required but a good persistent install should make this old hat and slow and it doesn't take care of drivers. The last time I tried making an ISO with Remastersys it didn't seem to copy all the required settings.

    Read the article

  • On boot firmware request for intel GMA 3100 chipset timing out

    - by Yannick M.
    I am currently in the process of installing a Gentoo linux box with a Vanilla 2.6.29-r5 kernel with gentoo-xen-kernel patches in order to run the Xen Hypervisor. After rebooting with the new kernel, the booting process seemed to hang on: [ 0.863005] platform microcode: firmware: requesting intel-ucode/06-0f-07 [ 60.863442] Microcode Update Driver: v2.00-xen <[email protected]>, Peter Oruba Apparently the firmware request times out after 60 seconds (/sys/class/firmware/timeout) and booting just continues. I have done some research and have found that on RHEL-4 this problem was related to the mount of /sys changed and the firmware.agent hotplug script couldn't parse the line correctly. However I am having some difficulty tracking down how to fix this on Gentoo. Any and all ideas are greatly appreciated! Thanks

    Read the article

  • Windows 8 doesn't play nice when dual booting with Windows 7?

    - by leaf68
    I have Windows 7, and Windows 8 on my laptop. I have Windows 7 set as my default, and it asks me each time if I want to boot with 7 or 8. When I boot with Windows 8, then restart my computer, it opens up to the Windows 8 boot screen, and sets Windows 8 as my default. How can I stop it from changing my default because it's a hassle to change it each time I want to use Windows 8. EDIT: I forgot to mention that in only happens sometimes. It usually doesn't change it when I restart, but it sometimes changes it when I completely shut it off.

    Read the article

  • Windows 7 boot manager issue

    - by L.ppt
    I was having windows 7 installed on my laptop, yesterday I tried to install Open Suse operating system. During its installation I chose a NTFS partition and formatted it to ext4 filesystem. During installation an error came that mount point cannot be created on this partition and I aborted the installation. They on reboot a message came BootMgr is missing. I then reinstalled the windows but on complete installation when setup rebooted the system then a blank screen came with a cursor blinking. I went through many forums and learnt may startup repairs and commands but it continues to hang up at a blank screen with cursor blinking. Reinstalling new windows 7 is also not doing any effect. I urgently need to repair my laptop for very important work. Please Help

    Read the article

  • Medion Akoya E5211 won't boot up or go into BIOS

    - by jay
    My Medion Akoya kept getting a blue screen and shutting down. Now when I try and restart the laptop, I just get a blank screen with a flashing _ in the top left corner. It doesnt beep when turned on – only if I press buttons. It doesn't give me the option to start BIOS or set up. I have tried pressing F8, F12, F2 and F3 but still nothing happens. It just goes to the the black screen with the flashing _ It is running Windows Visa Home Basic.

    Read the article

  • Mac Book Refuses to Boot

    - by pas09
    I have a Macbook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

    Read the article

  • Windows 7 - Deleted boot files!

    - by RadiantHex
    Hi folks, I am (was) using an install of Win7 on the C Disk Partition, I formatted the D Disk Parition, and now Win7 fails to bootup. I suspect the bootup config files were stored within the D Partition, despite the install residing on the C Partition. Any ideas on how I can fix this? :)

    Read the article

  • Need to boot into chkdsk from USB on Windows netbook

    - by Gaz Davidson
    While attempting to install Ubuntu on a 32-bit Windows XP netbook, the partition resize operation failed due to inconsistencies in the NTFS filesystem (lesson learned: run chkdsk /f in Windows before trying to resize a partition in Linux). Now the installer only gives the option to replace Windows with Ubuntu, the partition can't be resized in gparted, which displays a red exclamation mark and an error log when you click it. To make matters worse, we're also unable to reboot into Windows to get at chkdsk. We get a BSoD when choosing any of the options (including the DOS recovery console thing). The netbook has no CD-ROM drive, contains no recovery image and our only connection to the Internet is via the hotspot on my mobile device. We don't have Windows recovery CDs, but we do have a USB flash drive. We have a 64-bit laptop running Ubuntu 12.04 and Windows 7 (both 64-bit). So, on to the question: Is anyone aware of a way to get into a DOS recovery console and run chkdsk from a USB disk drive, without having to pirate Windows XP or download hundreds and hundreds of megabytes of crap? If it was my device I'd just flatten it, but it isn't. Please help!

    Read the article

  • PC won't boot after hanging during Windows 8 automatic repair [closed]

    - by Mun
    I've got a custom built PC using an ASUS P5E motherboard and Intel Q6600 CPU. I plugged in my mp3 player to the USB port yesteday, and when I came back to the machine after about an hour or so, the Windows 8 automatic repair message was on the screen. It seemed to stick there for an hour, after which I decided to just hit reset and try and figure out what was going on. However, the machine rebooted to a black screen before even getting to the BIOS, with the monitor lights just blinking indicating there was no signal. Tried powering down completely, waiting a few minutes and then powering back up again with no difference; black screen with monitor lights blinking. Tried leaving it on for a while and then pinging from another machine or accessing it via something like LogMeIn, but everything showed the machine as being offline. There were also no error beeps or anything like that. Also tried unplugging all of the memory and rebooting and that also caused no error beeps. Removed one of the display cards and left the other one in there, and still only a black screen. I'm inclined to think that the motherboard or CPU is fried, but there is no indication of damage on any components and the CPU fan seems to be working fine as it always has, so overheating seems unlikely. It's also plugged into a surge protector. The motherboard also has a green light which still lights up. As everything was still working fine before hitting the reset button during Windows 8 automatic repair screen, at which point everything stopped working, it seems unlikely that this problem is down to component failure. Has anyone else experienced anything like this or have any ideas on what could be causing this behavior?

    Read the article

  • Install Ubuntu 13.10 in dual boot with Windows 8.1

    - by Xaxt
    I have a laptop with installed Windows 8.1 x64. I want to intstall Ubuntu 13.10 (x64 of cause) in dual boot with it. I've made bootable USB stick (using unetbootin) with Ubuntu and tried to boot with it. It boots fine, and allows me to choose language and asks whether I want to install Ubuntu or just boot it. But if I select any ot these options, it shows black screen and hangs. I've been waiting about 15 minutes for it, but nothing happened. Light of USB stick indicates that my laptop was not trying to read from it that time. I switched off EFI in BIOS, switched AHCI/SATA modes, burned ISO image to DVD and still same effect. This topic can be called a duplicated, but I have't find what it duplicates. In other topics people asked what will happen if they update Windows 8 to 8.1 having already dual boot and I have installed Windows 8.1 and want to install Ubuntu alongside with it Did I miss something?

    Read the article

  • Dual-booting Ubuntu and Pardus with GRUB2...Pardus no show?

    - by Ibn Ali al-Turki
    Hello all, I have Ubuntu 10.10 installed and used to dual-boot Fedora, but I replaced Fedora with Pardus. After the install, I went into ubuntu, and did a sudo update-grub. It detected my Pardus 2011 install there. When I rebooted, it did not show up in my grub2 menu however. I went back to Ubuntu and did it again...then checked the grub.cfg, and it is not there. I have read that Pardus uses a grub legacy. How can I get Pardus into my grub2 menu? Thanks! sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd9b3496e Device Boot Start End Blocks Id System /dev/sda1 * 1 15197 122067968 83 Linux /dev/sda2 36394 60802 196059757 5 Extended /dev/sda3 15197 30394 122067968 83 Linux /dev/sda5 36394 59434 185075308 7 HPFS/NTFS /dev/sda6 59434 60802 10983424 82 Linux swap / Solaris Partition table entries are not in disk order and update-grub Found linux image: /boot/vmlinuz-2.6.35-25-generic Found initrd image: /boot/initrd.img-2.6.35-25-generic Found memtest86+ image: /boot/memtest86+.bin Found Pardus 2011 (2011) on /dev/sda3 Yet after this, I go to grub.cfg, and Pardus is not there.

    Read the article

  • After upgrading to Mac OS X Lion, I can't boot Windows anymore

    - by J. Pablo Fernández
    I upgraded to Mac OS X Lion and I can't run the installed Windows anymore. It seems the issue is that the Lion installation created extra partitions so the Windows partition has a different number one. It's disk0s4 instead of disk0s3 (if I recall correctly). Searching online found several discussions about it but only one with a proposed solution, https://discussions.apple.com/thread/3199099, essentially: bootrec.exe /FixMbr bootrec.exe /FixBoot bootrec.exe /RebuildBcd which didn't work. bootrec.exe /FixBoot claims that no windows partition has been found.

    Read the article

  • Can't get past bootcamp Windows logo, freezes immediately after picking boot partition -- Windows 7

    - by cksubs
    Hi, I had a fine install of Windows 7 alongside Snow Leopard. I had a power outage, and Windows restarted. When I booted via the "Hold Option" sceen, it started hanging at the grayscale "Windows logo" (squares) that comes up after picking the Windows drive from the bootcamp loader (the Windows version of the grayscale Apple logo when OS X loads). I think this happened once before, and installing rEFIt helped. I did that, but it continued to hang at the same point. I finally got fed up with it and erased the Windows partition via Disk Utility. I then reinstalled Windows 7 x64 from DVD to the fresh partition. Seemed fine. Ran Windows Update then restarted. FFFFFFFFF. Hangs in the same place. What can I do? Like I said, I already have rEFIt installed. Booting the Windows 7 install CD results in the same infinite loading error. I don't have a spare Snow Leopard disk handy.

    Read the article

  • Do I have to completely reinstall Ubuntu now that it won't boot?

    - by Dave M G
    I just tried installing software called Teamviewer. It said there was some kind of error with unresolved dependancies. Then I realized I was trying to install the 32 bit version, but I needed to install the 64 bit version. So I tried that, and I got an error saying that Ubuntu needed to do a partial upgrade. I thought that was weird, so I just wanted to abandon installing anything and get out of this. I exited all programs and rebooted, and now I can't get back into Ubuntu. After the GRUB screen I get a black screen and no login options. If I boot into recovery, I get the following screen: I booted up a live CD of 12.04 to see if that could help, but it seems the only option is to completely reinstall Ubuntu. Can I repair this in any way, or is my only option to make a fresh install?

    Read the article

  • After repairing permissions, Mac OS X won't boot

    - by Power-coder
    This morning I ran the Repair Permissions command from inside the Disk Utility. Ever since then my MacBook wont move past the splash screen when booting. I've revolted in verbose mode and I see that it is trying to repair the disk but then terminates with 'Unable to repair the volume'. Since then I have tried running the Disk Repair from the Snow Leopard install DVD and it quits with the same error. Is there a way I can repair this thing without reformatting and installing over again? How does something so simple as a permissions repair make the system unbootable like this?

    Read the article

  • Dual-booting Ubuntu and Pardus with GRUB2...Pardus no show?

    - by Ibn Ali al-Turki
    I have Ubuntu 10.10 installed and used to dual-boot Fedora, but I replaced Fedora with Pardus. After the install, I went into ubuntu, and did a sudo update-grub. It detected my Pardus 2011 install there. When I rebooted, it did not show up in my grub2 menu however. I went back to Ubuntu and did it again...then checked the grub.cfg, and it is not there. I have read that Pardus uses a grub legacy. How can I get Pardus into my grub2 menu? Thanks! sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd9b3496e Device Boot Start End Blocks Id System /dev/sda1 * 1 15197 122067968 83 Linux /dev/sda2 36394 60802 196059757 5 Extended /dev/sda3 15197 30394 122067968 83 Linux /dev/sda5 36394 59434 185075308 7 HPFS/NTFS /dev/sda6 59434 60802 10983424 82 Linux swap / Solaris Partition table entries are not in disk order and update-grub Found linux image: /boot/vmlinuz-2.6.35-25-generic Found initrd image: /boot/initrd.img-2.6.35-25-generic Found memtest86+ image: /boot/memtest86+.bin Found Pardus 2011 (2011) on /dev/sda3 Yet after this, I go to grub.cfg, and Pardus is not there.

    Read the article

  • MacBook Refuses to Boot

    - by pas09
    I have a MacBook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

    Read the article

  • Strange Ubuntu linux boot behaviour

    - by Slartibartfast
    I've recently installed Ubuntu 9.10 on a desktop machine as the only OS. If put in a hibernate, it wakes up normally, but if turned of completely, after turning on there is no "beep" sound from BIOS and HD lamp blinks for a while then stops. When I hit reset in that state, it bots normally. What is going on and how could I fix it?

    Read the article

  • How to edit Registry from another OS Boot up

    - by jack
    Hi I accidentally changed one parameter in Windows and it was crashed and restarted everytime I logon. I can't go with safe mode. Restoring to Known Good Configurations doesn't work too. Unfortunately I don't have system backup. Are there any ways to recover or edit the registry file from another OS or bootable Windows PE? Which tools can I use to edit? Many thanks!

    Read the article

  • USB 3 port fails to enable my keyboard during boot

    - by Jay
    My laptop has both USB 2.0 and 3.0 ports. I've connected: mouse -- USB 2.0 port keyboard -- USB 3.0 port On starting the system, the mouse is active however the keyboard does not function. Everytime i have to disconnect the keyboard and plug it back in and only then it becomes active. Is there any fix to this problem or is the USB port itself faulty? specs: Dell XPS, 64-bit i7 processor with 8G of RAM

    Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >