Search Results

Search found 1362 results on 55 pages for 'mini how tos'.

Page 51/55 | < Previous Page | 47 48 49 50 51 52 53 54 55 | Next Page >

iTunes and Hulu Playback Choppy and Slow?

- by Bart Silverstrim

Specs: Windows XP, latest updates 1.7 ghz Pentium 4 1 gig ram DirectX 9.0c NVIDIA GeForce FX 5200 with 256 meg RAM OpenGL 2.1 The story: Okay, I had an older system laying around that I figured I would try turning into a mini-media system to connect to our TV. I put together a lot of older parts, got it into working order, etc. and hooked it up and voila'...slower, but usable system that displayed to the TV. It could run some things decently. I put in iTunes, it played video okay. Not great, but okay. Played Hulu and since we have a 1Mb download rate, the minimum for their site, there were some choppy moments when watching their shows, but I found that (sadly) changing resolution to 800x600 seemed to help with the issue when running full screen. I downloaded the application called Boxee and installed it. It wouldn't run; apparently the video card in the system supported OpenGL 1.2, and needed at least 1.4. I bought a cheap card, the 5200, with four times the memory in it and support for OpenGL 2.1. Installed, everything seemed fine. iTunes seemed to run fine, the video driver (PNY video card) came with OpenGL 2.1, and Boxee finally ran. I then upgraded to the latest drivers for the video card and ran the DirectX updater from MS. After that, the OpenGL Extension Viewer wouldn't run. It just stayed as an icon in the task bar. Also, any and all videos in iTunes stuttered and went out of sync horribly. Unwatchable. I tried watching Hulu video in Boxee, and it displayed video like it was a series of stills in a very bad powerpoint. Playing straightforward audio-only came through fine, no stutters no hiccups. I tried system restore to roll back updates to pre-directX updates (I thought that seemed to be the time that triggered the weird behavior), no joy. I tried uninstalling and reinstalling the video drivers. I installed updated audio drivers (ensoniq audiopci), nothing helped. I finally wiped the drive last night and tried reinstalling everything and restoring my iTunes content via an import from a backup. Fresh install, no updater on the video card or directx. the problem was still there although I haven't tested Hulu, the iTunes player is still stuttering like crazy if I play video, fine if I play audio. I know the processor isn't high in heft, but with one gig of RAM and the fact that it seemed to do okay before I thought that the problem must be software related. Has anyone else run into this sort of issue and have a solution other than "buy a new computer"? What specs seem to work with video at the low end for you? Right now the system is of little use other than keeping my music library and iTunes apps synced with my iPod.

Read the article
Educate me - should I buy these prebuilt NAS (which is better) or make my own?

- by user29336

I'm trying to learn as much as possible, and I think I've learned quite a bit so bear with me here under my confusion. I found a coupe NAS setups. I'm not sure if one is better than the other, other than the price being higher on some, and some coming with drives VS not. Let me list my setup so you can get an idea of what I want to provide: Macbook Pro Macbook Mini for Media streaming (so far) Windows 7 Gaming Computer Xbox 360 I'd like to provide a storage system for all these devices so they can access files very easily, I'd also like any of these devices to be able to stream media from this storage system. I'd like this storage system to be hassle free in terms of my confidence in the data integrity. If a drive fails, I want to know that I can replace the drive and all my files will still exist. I'd like to access this storage system OUTSIDE of my LAN. If I'm out on a job for work I'd like to go in, or be able to have people DL some files. This brings me to a question, is this what iSCSI is? I'd like this data system to be able to download torrents. I want to mount any drive on this storage system onto my OSX laptop as if it were a local drive attached. (Is this with iSCSI is?) I'd like this system to have a GOOD web based GUI. I don't want to install software to use it. I believe those are the most of my requirements. If I'm missing something that I have no knowledge about, can someone educate me? Here are the systems I found: $729ish on Newegg Lacie 5Big Network 2 (comes with 5TB of space. iSCSI / mac compatible, torrents, nice ui, + others?) Is this overpriced for what it provides? It almost seems like a great deal to me because of the 5TB of space it comes with vs the other NAS systems that don't come with storage but cost $600-700. Should I get a different NAS system? Netgear? Others? Do they have same features? Better? Is it better to buy your own disks? What about making my own? I'm tech savy all around. It seems cheaper to buy a premade one especially with the support/warranty it provides...

Read the article
Trying to grok Linux quotas, where is the data stored?

- by CarpeNoctem

So all the tutorials and documentation for the Linux quota system has left me confused. For each filesystem with quotas enabled/on where is the actual quota information stored? Is it filesystem metadata or is it in a file? Say user foo creates a new file on /home. How does the kernel determine whether user foo is below their hard limit? Does the kernel have to tally up quota information on that filesystem each time or is it in the superblock or somewhere else? As far as I understand, the kernel consults the aquota.user file for the actual rules, but where is the current quota usage data stored? Can this be viewed with any tools outside repquota and the like? TIA!! Update: Thanks for the help. I had already read that mini-HOWTO. I am pretty clear on the usage of the user space tools. What I was unclear on is whether the usage data was ALSO in the file that stored per-user limits and you answered this with a yes. From what I can tell, rc.sysinit runs quotacheck and quotaon on startup. The quotacheck program analyzes the filesystem, updates the aquota.* files. It then makes use of quota.h and the quotactl() syscall to inform the kernel of quota info. From this point forward the kernel hashes that information and increments/decrements quota stats as changes occur. Upon shutdown, the init.d/halt script runs the quotaoff command RIGHT before the filesystems are unmounted. The quotaoff command does not appear to update the aquota.* files with the information the kernel has in memory. I say this because the {a,c,m}times for the aquota.user file are only updated upon a reboot of the system or by manual running the quotacheck command. It appears - as far as I can tell - that the kernel just drops it's up-to-date usage data on the floor at shutdown. This information is never used to update the aquota.* files. They are updated during startup by quotacheck(rc.sysinit). Seems silly to me since that updated info had already been collected by the kernel. So...in conclusion I am still not entirely clear on the methods. ;)

Read the article
Why does pinging a local router return "Destination Host Unreachable"?

- by Matt H

I have two tomato routers. One is bridged wirelessly with the other. I have a new server on the network. It's running Ubuntu Server 11.04. They are all connected like this: A - Linux PC B - New Server C - Mac Mini D - Macbook T1 - Tomato 1 T2 - Tomato 2 They are connected like so: A -----+-T1 ==== wireless bridge ==== T2----- ADSL modem | | C & D Connected wirelessly to T2 B -----+ A, C & D do not experience any issues. I have an active SSH session to B from A and it's not experiencing any loss. B, the new server occasionally cannot ping T2 and therefore cannot connect to the internet. However, A can always contact B and B can ping A and B When the network is lost, B can still ping T1, but not T2 yet at the same as B has lost connection to T2, A can still ping T2. Any ideas on what this could be? there is nothing that gives any clues in any of the logs on either router or the linux server. One thing that is interesting is that I set up a ping running between B and T2. T2 has the IP address 192.68.1.1 Here is what I am seeing: From 192.168.1.1 icmp_seq=26 Destination Host Unreachable From 192.168.1.1 icmp_seq=27 Destination Host Unreachable From 192.168.1.1 icmp_seq=28 Destination Host Unreachable From 192.168.1.1 icmp_seq=29 Destination Host Unreachable From 192.168.1.1 icmp_seq=30 Destination Host Unreachable From 192.168.1.1 icmp_seq=31 Destination Host Unreachable From 192.168.1.1 icmp_seq=33 Destination Host Unreachable From 192.168.1.1 icmp_seq=34 Destination Host Unreachable From 192.168.1.1 icmp_seq=35 Destination Host Unreachable 64 bytes from 192.168.1.1: icmp_req=36 ttl=63 time=3.40 ms 64 bytes from 192.168.1.1: icmp_req=37 ttl=63 time=5.70 ms 64 bytes from 192.168.1.1: icmp_req=38 ttl=63 time=2.25 ms 64 bytes from 192.168.1.1: icmp_req=39 ttl=63 time=2.18 ms 64 bytes from 192.168.1.1: icmp_req=40 ttl=63 time=3.12 ms 64 bytes from 192.168.1.1: icmp_req=41 ttl=63 time=2.15 ms 64 bytes from 192.168.1.1: icmp_req=42 ttl=63 time=1.97 ms 64 bytes from 192.168.1.1: icmp_req=43 ttl=63 time= And it cycles to being reachable and not. So I guess you could say the question is, why is the router responding that it cannot be reached?

Read the article
Create text file named after a cell containing other cell data

- by user143041

I tried using the code below for the Excel program on my `Mac Mini using the OS X Version 10.7.2 and it keeps saying Error due to file name / path: (The Excel file I am creating is going to be a template with my formulas and macros installed which will be used over and over). Sub CreateFile() Do While Not IsEmpty(ActiveCell.Offset(0, 1)) MyFile = ActiveCell.Value & ".txt" fnum = FreeFile() Open MyFile For Output As fnum Print #fnum, ActiveCell.Offset(0, 1) & " " & ActiveCell.Offset(0, 2) Close #fnum ActiveCell.Offset(1, 0).Select Loop End Sub What Im trying to do: 1st Objective I would like to have the following data to be used to create a text file. A:A is what I need the name of the file to be. B:2 is the content I need in the text file. So, A2 - "repair-video-game-Glassboro-NJ-08028.txt" is the file name and B2 to be the content in the file. Next, A3 is the file name and B3 is the content for the file, etc. ONCE the content reads what is in cell A16 and B16 (length will vary), the file creation should stop, if not then I can delete the additional files created. This sheet will never change. Is there a way to establish the excel macro to always go to this sheet instead of have to select it with the mouse to identify the starting point? 2nd Objective I would like to have the following data to be used to create a text file. A:1 is what I need the name of the file to be. B:B is the content I want in the file. So, A2 - is the file name "geo-sitemap.xml" and B:B to be the content in the file (ignore the .xml file extension in the photo). ONCE the content cell reads what is in cell "B16" (length will vary), the file creation should stop, if not then I can adjust the cells that have need content (formulated content you see in the image is preset for 500 rows). This sheet will never change. Is there a way to establish the excel macro to always go to this sheet instead of have to select it with the mouse to identify the starting point? I can Provide the content in the cells that are filled in by excel formulas that are not not to be included in the .txt files. It is ok if it is not possible. I can delete the extra cells that are not populated (based on the data sheet). Please let me know if you need any more additional information or clarity and I will be happy to provide it.

Read the article
How to Create Auto Playlists in Windows Media Player 12

- by DigitalGeekery

Are you getting tired of the same old playlists in Windows Media Player? Today we’ll show you how to create dynamic auto playlists based on criteria you choose in WMP 12 in Windows 7. Auto Playlists In Library view, click on Create playlist dropdown arrow and select Create auto playlist. On the New Auto Playlist window type in a name for the playlist in the text box. Now we need to choose our criteria by which to filter your playlist. Select Click here to add criteria. For our example, we will create a playlist of songs that were added to the library in the last week from the Alternative genre. So, we will first select Date Added from the dropdown list. Many criteria will have addition options to configure. In the example below you will see that we have a few options to fine tune. We will filter all the songs added to the library in the last 7 days. We will select Is After from the first dropdown list. Then select Last 7 Days from the second dropdown list. You can add multiple criteria to further filter your playlist. If you can’t find the criteria you are looking for, select “More” at the bottom of the dropdown list. This will pull up a filter window with all the criteria. Select a filter and then click OK when finished. From the Genre dropdown, we will select Alternative. If you’d like to add Pictures, Videos, or TV Shows to your auto playlists you can do so by selecting them from the dropdown list under And also include. You will then be able to select criteria for your pictures, videos, or TV shows from the dropdown list. Finally, you can also add restrictions to your music such as the number of items, duration, or total size. We will limit the duration of our playlist to one hour by selecting Limit Total Duration To… Then type in 1 hour…Click OK. Our library is automatically filtered and a playlist is created based on the criteria we selected. When additional songs are added to the Windows Media Player library, any of new songs that fit the criteria will automatically be added to the New Songs playlist. You can also save a copy of an auto playlist as a regular playlist. Switch to Playlists view by clicking Playlists from either the top menu or the navigation bar. Select the Play tab and then click Clear list to remove any tracks from the list pane. Right-click on the playlist you want to save, select Add to, and then Play list. The songs from your auto playlist will appear as an Unsaved list on the list pane. Click Save list. Type in a name for your playlist. Your auto playlist will continue to change as you add or remove items from your Media Player library that meet the criteria you established. The new saved playlist we just created will stay as it is currently. Editing a Auto playlist is easy. Right-click on the playlist and select Edit. Now you are ready to enjoy your playlist. Conclusion Auto playlists are great way to keep your playlists fresh in Windows Media Player 12. Users can get creative and experiment with the wide variety of criteria to customize their listening experience. If you are new to playlists in Windows Media Player, you may want to check our our previous post on how to create custom playlists in Windows Media Player 12. Are you looking to get better sound from WMP 12? Take a look at how to improve playback using enhancements in Windows Media Player 12. Similar Articles Productive Geek Tips Create Custom Playlists in Windows Media Player 12Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxMake Windows Media Player Automatically Open in Mini Player ModeMake VLC Player Look like Windows Media Player 10 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid

Read the article
Importing Multiple Schemas to a Model in Oracle SQL Developer Data Modeler

- by thatjeffsmith

Your physical data model might stretch across multiple Oracle schemas. Or maybe you just want a single diagram containing tables, views, etc. spanning more than a single user in the database. The process for importing a data dictionary is the same, regardless if you want to suck in objects from one schema, or many schemas. Let’s take a quick look at how to get started with a data dictionary import. I’m using Oracle SQL Developer in this example. The process is nearly identical in Oracle SQL Developer Data Modeler – the only difference being you’ll use the ‘File’ menu to get started versus the ‘File – Data Modeler’ menu in SQL Developer. Remember, the functionality is exactly the same whether you use SQL Developer or SQL Developer Data Modeler when it comes to the data modeling features – you’ll just have a cleaner user interface in SQL Developer Data Modeler. Importing a Data Dictionary to a Model You’ll want to open or create your model first. You can import objects to an existing or new model. The easiest way to get started is to simply open the ‘Browser’ under the View menu. The Browser allows you to navigate your open designs/models You’ll see an ‘Untitled_1′ model by default. I’ve renamed mine to ‘hr_sh_scott_demo.’ Now go back to the File menu, and expand the ‘Data Modeler’ section, and select ‘Import – Data Dictionary.’ This is a fancy way of saying, ‘suck objects out of the database into my model’ Connect! If you haven’t already defined a connection to the database you want to reverse engineer, you’ll need to do that now. I’m going to assume you already have that connection – so select it, and hit the ‘Next’ button. Select the Schema(s) to be imported Select one or more schemas you want to import The schemas selected on this page of the wizard will dictate the lists of tables, views, synonyms, and everything else you can choose from in the next wizard step to import. For brevity, I have selected ALL tables, views, and synonyms from 3 different schemas: HR SCOTT SH Once I hit the ‘Finish’ button in the wizard, SQL Developer will interrogate the database and add the objects to our model. The Big Model and the 3 Little Models I can now see ALL of the objects I just imported in the ‘hr_sh_scott_demo’ relational model in my design tree, and in my relational diagram. Quick Tip: Oracle SQL Developer calls what most folks think of as a ‘Physical Model’ the ‘Relational Model.’ Same difference, mostly. In SQL Developer, a Physical model allows you to define partitioning schemes, advanced storage parameters, and add your PL/SQL code. You can have multiple physical models per relational models. For example I might have a 4 Node RAC in Production that uses partitioning, but in test/dev, only have a single instance with no partitioning. I can have models for both of those physical implementations. The list of tables in my relational model Wouldn’t it be nice if I could segregate the objects based on their schema? Good news, you can! And it’s done by default Several of you might already know where I’m going with this – SUBVIEWS. You can easily create a ‘SubView’ by selecting one or more objects in your model or diagram and add them to a new SubView. SubViews are just mini-models. They contain a subset of objects from the main model. This is very handy when you want to break your model into smaller, more digestible parts. The model information is identical across the model and subviews, so you don’t have to worry about making a change in one place and not having it propagate across your design. SubViews can be used as filters when you create reports and exports as well. So instead of generating a PDF for everything, just show me what’s in my ‘ABC’ subview. But, I don’t want to do any work! Remember, I’m really lazy. More good news – it’s already done by default! The schemas are automatically used to create default SubViews Auto-Navigate to the Object in the Diagram In the subview tree node, right-click on the object you want to navigate to. You can ask to be taken to the main model view or to the SubView location. If you haven’t already opened the SubView in the diagram, it will be automatically opened for you. The SubView diagram only contains the objects from that SubView Your SubView might still be pretty big, many dozens of objects, so don’t forget about the ‘Navigator‘ either! In summary, use the ‘Import’ feature to add existing database objects to your model. If you import from multiple schemas, take advantage of the default schema based SubViews to help you manage your models! Sometimes less is more!

Read the article
Compress Large Video Files with DivX / Xvid and AutoGK

- by DigitalGeekery

Have you ever recorded home video on a camcorder only to find the video size is enormous? What if you wanted to share a video clip on YouTube or another video sharing site, but the file size was bigger than the maximum upload size? Today we’ll look at a way to compress certain video files, such as MPEG and AVI, with Auto Gordian Knot (AutoGK). AutoGK is a free application that runs on Windows. It supports Mpeg1, Mpeg2, Transport Streams, Vobs, and virtually any codec used for an .AVI file. AutoGK will accept as input the following file types: MPG, MPEG, VOB, VRO, M2V, DAT, IFO, TS, TP, TRP, M2T, and AVI. Files are output as .AVI files and are converted using the DivX or XviD codecs. Installing and Using AutoGK Download and install AutoGK (link below) Open the AutoGK. You’ll need to navigate a few wizard screens, but you can just accept the defaults. Choose your video file by clicking on the folder to the right of the Input file text box. Browse for and select your video file and click “Open.” For this example, we’ll be working with an .AVI file that’s 167MB in size. The output file is copied into the same directory as the input file by default, but you can change this if you choose. If the input file is also .AVI, AutoGK will append an _agk to the output file so that the original is not overwritten. Next, you’ll see any audio tracks listed. You can unselect the check box if you’d like to remove the audio track. You can choose one of the Predefined size options… Or, select a Custom size in MB or Target Quality in percentage. For our example, we’ll be compressing our 167MB file to 35MB. Click on Advanced Settings. Here you can choose your codec, if you have a preference, as well as output resolution and output audio. If you’d like to use the DivX codec, you’ll need to download and install it separately. (See link below) Typically you’ll want to keep the defaults. Click “OK.” Now you’re ready to add your file conversion job to the Job queue. Click Add Job to add it to the queue. You can add multiple files conversions to the job queue and convert them in one batch. Click Start to begin the conversion process. The process will begin. You’ll be able to see the progress in the Log window on the bottom left. When the conversion is complete you’ll see a “Job finished” and the total time in the log window. Check your output file to see it’s compressed size. Test your video just to make sure the output quality is satisfactory. Note: Conversion times can vary greatly depending on the size of the file and your computer hardware. Files that are several GBs in size may take several hours to compress. AutoGK is no longer being actively developed but is still a wonderful DivX/XviD conversion tool. It can also be used to compress and convert non-copy protected DVDs. Downloads AutoGordianKnot DivX (optional) Similar Articles Productive Geek Tips Use Your Mac Mini as a Media Server Part 2Make Disk Cleanup Compress Older(or Newer) Files on XPMysticgeek Blog: Exclusive Look Inside Vreel – Including Interview With Vreel Founder!Friday Fun: Watch HD Video Content with MeevidConvert a DVD Movie Directly to AVI with FairUse Wizard 2.9 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox)

Read the article
Developer Training – Employee Morals and Ethics – Part 2

- by pinaldave

Developer Training - Importance and Significance - Part 1 Developer Training – Employee Morals and Ethics – Part 2 Developer Training – Difficult Questions and Alternative Perspective - Part 3 Developer Training – Various Options for Developer Training – Part 4 Developer Training – A Conclusive Summary- Part 5 If you have been reading this series of posts about Developer Training, you can probably determine where my mind lies in the matter – firmly “pro.” There are many reasons to think that training is an excellent idea for the company. In the end, it may seem like the company gets all the benefits and the employee has just wasted a few hours in a dark, stuffy room. However, don’t let yourself be fooled, this is not the case! Training, Company and YOU! Do not forget, that as an employee, you are your company’s best asset. Training is meant to benefit the company, of course, but in the end, YOU, the employee, is the one who walks away with a lot of useful knowledge in your head. This post will discuss what to do with that knowledge, how to acquire it, and who should pay for it. Eternal Question – Who Pays for Training? When the subject of training comes up, money is often the sticky issue. Some companies will argue that because the employee is the one who benefits the most, he or she should pay for it. Of course, whenever money is discuss, emotions tend to follow along, and being told you have to pay money for mandatory training often results in very unhappy employees – the opposite result of what the training was supposed to accomplish. Therefore, many companies will pay for the training. However, if your company is reluctant to pay for necessary training, or is hesitant to pay for a specific course that is extremely expensive, there is always the art of compromise. The employee and the company can split the cost of the training – after all, both the company and the employee will be benefiting. [Click on following image to answer important question] Click to Enlarge This kind of “hybrid” pay scheme can be split any way that is mutually beneficial. There is the obvious 50/50 split, but for extremely expensive classes or conferences, this still might be prohibitively expensive for the employee. If you are facing this situation, here are some example solutions you could suggest to your employer: travel reimbursement, paid leave, payment for only the tuition. There are even more complex solutions – the company could pay back the employee after the training and project has been completed. Training is not Vacation Once the classes have been settled on, and the question of payment has been answered, it is time to attend your class or travel to your conference! The first rule is one that your mothers probably instilled in you as well – have a good attitude. While you might be looking forward to your time off work, going to an interesting class, hopefully with some friends and coworkers, but do not mistake this time as a vacation. It can be tempting to only have fun, but don’t forget to learn as well. I call this “attending sincerely.” Pay attention, have an open mind and good attitude, and don’t forget to take notes! You might be surprised how many people will want to see what you learned when you go back. Report Back the Learning When you get back to work, those notes will come in handy. Your supervisor and coworkers might want you to give a short presentation about what you learned. Attending these classes can make you almost a celebrity. Don’t be too nervous about these presentations, and don’t feel like they are meant to be a test of your dedication. Many people will be genuinely curious – and maybe a little jealous that you go to go learn something new. Be generous with your notes and be willing to pass your learning on to others through mini-training sessions of your own. [Click on following image to answer important question] Click to Enlarge Practice New Learning On top of helping to train others, don’t forget to put your new knowledge to use! Your notes will come in handy for this, and you can even include your plans for the future in your presentation when you return. This is a good way to demonstrate to your bosses that the money they paid (hopefully they paid!) is going to be put to good use. Feedback to Manager When you return, be sure to set aside a few minutes to talk about your training with your manager. Be perfectly honest – your manager wants to know the good and the bad. If you had a truly miserable time, do not lie and say it was the best experience – you and others may be forced to attend the same training over and over again! Of course, you do not want to sound like a complainer, so make sure that your summary includes the good news as well. Your manager may be able to help you understand more of what they wanted you to learn, too. Win-Win Situation In the end, remember that training is supposed to be a benefit to the employer as well as the employee. Make sure that you share your information and that you give feedback about how you felt the sessions went as well as how you think this training can be implemented at the company immediately. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article
6 Reasons Why You Can’t Move Your Cell Phone To Any Carrier You Want

- by Chris Hoffman

You can buy a laptop or Wi-Fi tablet and use it on Wi-Fi anywhere in the world, so why are cell phones and devices with mobile data not portable between different cellular networks in the same country? Unlike with Wi-Fi, there are many different competing cellular network standards — both around the world and within countries. Cellular carriers also like locking you to their specific network and making it difficult to move. That’s what contracts are for. Phone Locking Many phones are sold locked to a specific network. When you buy a phone from a cellular carrier, they often lock that phone to their network so you can’t take it to a competitor’s network. That’s why you’ll often need to unlock a phone before you can move it to a different cellular provider or take it to a different country and use it on a local provider instead of roaming. Cellular carriers will generally unlock your phone for you as long as you’re no longer in a contract with them. However, unlocking a cell phone you’ve paid for without your carrier’s permission is currently a crime in the USA. GSM vs. CDMA Some cellular networks use the GSM (Global System for Mobile Communications) standard, while some use CDMA (Code-division multiple access). Worldwide, most cellular networks use GSM. In the USA, both GSM and CDMA are popular. Verizon, Sprint, and other carriers that use their networks use CDMA. AT&T, T-Mobile, and other carriers that use their networks are use GSM. These are two competing standards and are not interoperable. This means you can’t simply take a phone from Verizon to T-Mobile, or from AT&T to Sprint. These carriers have incompatible phones. CDMA Restrictions CDMA is more restricted than GSM. GSM phones have SIM cards. Simply open the phone, pop out the SIM card, and pop in a new SIM card to switch carriers. (In reality, it’s more complicated thanks to phone locking and other factors here.) CDMA phones don’t have removable modules like this. All CDMA phones ship locked to a specific network and you’d have to get both your old carrier and your new carrier to cooperate to switch phones between them. In reality, many people just consider CDMA phones eternally locked to a specific carrier. Frequencies Different cellular networks throughout the USA and the rest of the world use different frequencies. These radio frequencies have to be supported by your phone’s hardware or your phone simply can’t work on a network using those frequencies. Many GSM phones support three or four bands of frequencies — 900/1800/1900 MHz, 850/1800/1900 MHz, or 850/900/1800/1900 MHz. These are sometimes called “world phones” because they allow easier roaming. This allows the manufacturer to produce a phone that will support all GSM networks in the world and allows their customers to travel with those phones. If your phone doesn’t support the appropriate frequencies, it won’t work on certain networks. LTE Bands When it comes to newer, faster LTE networks, different frequencies are still a concern. LTE frequencies are generally known as “LTE bands.” To use a smartphone on a certain LTE network, that smartphone will have to support that LTE network’s frequency. Different models of phones are often created to work on different LTE networks around the world. However, phones are generally supporting more and more LTE networks and becoming more and more interoperable over time. SIM Card Sizes The SIM cards used in GSM phones come in different sizes. Newer phones use smaller SIM cards to save space and be more compact. This isn’t a big obstacle, as the different sizes of SIM cards — full-size SIM, mini-SIM, micro-SIM, and nano-SIM are actually compatible. The only difference between them is the size of the plastic card surrounding the SIM’s chip. The actual chip is the same size between all the SIM cards. This means you can take an old SIM card and cut the plastic off until it becomes a smaller-size SIM card that fits in a modern phone. Or, you can take a smaller-size SIM card and insert it into a tray so that it becomes a larger-size SIM card that fits in an older phone. Be aware that it’s very possible to damage your SIM card and make it not work properly by cutting it to the wrong dimensions. Your cellular carrier will often be able to cut your SIM card for you or give you a new one if you want to use an old SIM card in a new phone. Hopefully they won’t overcharge you for this service, too. Be sure to check what types of networks, frequencies, and LTE bands your phone supports before trying to move it between networks. You may have to buy a new phone when moving between certain cellular carriers. Image Credit: Morgan on Flickr, 22n on Flickr

Read the article
Red Gate does Byte Night 2012

- by red(at)work

On the 5th of October 2012, a team of nine plucky Red Gaters braved the howling wind and the driving rain to sleep outside. No tents or mattresses were allowed – all we took for protection were sleeping bags, groundsheets, plastic sacks and Colin’s enormous fishing umbrella (a godsend in umbrella-y disguise). Why would we do such a thing? For Byte Night, an annual tech sector sleepout in support of Action for Children, who tackle the causes as well as the consequences of youth homelessness. Byte Night encourages technology professionals to do for one night a year what thousands of young people have to do every night – sleep rough. We signed up for Byte Night in the warm, heady midst of the British summer, thinking it couldn’t possibly be all that bad. Even on the night itself – before the rain began to fall, sat in the comfort and warmth of a company canteen, drinking wine and eating chill and preparing to win the pub quiz – we were excited and optimistic about the night that lay ahead of us. All of that changed as soon as we stepped out into one of the worst rainstorms of the year. Brian, the team’s birthday boy, describes it best: Picture the scene: it’s 3 am on a Friday. I’m lying outside, fully clothed in a sleeping bag, wearing a raincoat, trussed up inside a large plastic pocket, on a ground sheet beneath a giant umbrella, wedged so tightly between two of my colleagues that I can’t move my arms. I’m wide awake, staring up at the grey sky beyond the edge of the umbrella; a limp, flickering white glow hints at a moon somewhere behind the drifting clouds. I haven’t slept since we first moved outside at 11 pm. Outside. Did I mention we were outside? I’m hung over. I need the loo. But there is no way on earth that I’m getting out of this sleeping bag. It’s cold. It’s raining. Not just raining, but chucking it down. It’s been doing this non-stop since 10pm. The rain sounds like a hyperactive drummer on the fishing umbrella, and the noise is loud and relentless. Puddles of water are forming all over the groundsheet, and, despite being ensconced inside the plastic pouch, I am wet. The fishing umbrella is protecting me from the worst of the driving rain, but not all of me is under it, and five hours of rain is no match for it. Everything is wet. My left side has become horribly damp. My trainers, which I placed next to my sleeping bag, are now completely soaked through. Mmm. That’ll be fun in the morning. My head is next to Colin’s head on one side, and a multi-pack of McCoy’s cheddar and onion crisps on the other. Don’t ask about the tub of hummus. That’s somewhere down by my ankles, abandoned to the night. Jess, who is lying next to me, rolls over onto her side. A mini waterfall cascades from her rain-pouch onto my face. Bah. I continue to stare into the heavens, willing the dawn to hurry up. Something lands on my face. It’s a mosquito. Great. Midnight, when this still seemed like fun – when we opened some champagne and my colleagues presented me with a caterpillar birthday cake, when everyone was drunk and jolly and full of stoic resolve – feels like a long time ago. Did I mention that today is my birthday? The remains of the caterpillar cake endure the same fate as the hummus, left out in the rain like a metaphor for sadness. It’s getting colder. I can see my breath. Silence has descended on the group, apart from the rustle of plastic. And the rain, obviously. Someone snores, and I envy whoever it is the sweet escape of sleep. I try to wriggle a bit further down inside my sleeping bag, but it doesn’t want to be wriggled into. Only 3 hours till dawn. 180 minutes. I begin to count them off, one at a time. All nine of us got to go home in the morning, but thousands of children across the UK don’t have that luxury. If you’d like to sponsor the Red Gate Byte Night team, our JustGiving page can be found here. Chris, before the outside bit actually happened. More photos from Byte Night Cambridge 2012 can be found here.

Read the article
Understanding each other in web development

- by Pete Hotchkin

During my career I have been lucky enough to work in several different roles within web development with many extremely talented people, from incredible designers who were passionate about the placement of every pixel right through to server administrators and DBAs who were always measuring the improvements they were making to their queries in the smallest possible unit. The problem I always faced was that more often than not I was stuck in the middle trying to mediate between these different functions and enable each side to understand the other’s point of view. The main areas of contention that there have always been between these functional groups in my experience have been at 2 key points: during the build phase and then when there is a problem post-build. During both of these times it is often easier for someone to pass the buck onto someone else than spend the time to understand the other person’s perspective. Below is a quick look at two upcoming tools that will not only speed up the build phase for each function, but also help when it comes to the issues faced once a site has been pushed live. In my experience a web project goes through several phases of development. The first of these is design, generally handled as Photoshop files which are then passed onto a front-end developer. This is the first point at which heated discussions can arise. One problem I’ve seen several times is that the designer doesn’t fully understand the platform constraints that need to be considered, and as a result has designed something that does not translate very well or is simply not possible. Working at Red Gate, I am lucky enough to be able to meet some amazing people and this happened just the other day when I was introduced to Neil Kinnish and Pete Nelson, the creators of what I believe could be a great asset in this designer-developer relationship, Mixture. Mixture allows the front end developer to quickly prototype a web page with built-in frameworks such as bootstrap. It’s not an IDE however, it just sits there in the background and monitors the project files in the background so every time you save a file from your favorite IDE, it will compile things like LESS, compact your JavaScript and the automatically refresh your test browser so you can see the changes instantly. I think one of the best parts of this however is a single button that pushes the changed files up to the web so the designer can instantly see how far the developer has got and the problem that he is facing at that time without the need to spend time setting up a remote server. I can see this being a real asset to remote teams where there needs to be a compromise between the designer and the front-end developer, or just to allow the designer to see how the build is progressing and suggest small alterations. Once the design has been built into the front end the designer’s job is generally done and there are no other points of contention between the designer and the other functions involved in building these web projects. As the project moves into the stage of integrating it into the back end and deploying it to the production server other functions start to be pulled in and other issues arise such as the back-end developer understanding the frameworks that they are using such as the routes that are in place in an MVC application or the number of database calls that the ORM layer is actually making. There are many tools out there that can actually help with these problems such as mini profiler that gives you a quick snapshot of what is going on directly in the browser. For a slightly more in-depth look at what is happening and to gain a deeper understanding of an application you may be working on though, you may want to consider Glimpse. Created by Nik and Anthony, it is an application that sits at the bottom of your browser (installed via NuGet) which can show you information about how your application is pieced together and how the information on screen is being delivered as it happens. With a wealth of community-built plugins such as one for nHibernate and linq2SQL (full list of plugins on NuGet). It can be customized directly to your own setup to truly delve into the code to see what is happening, and can help to reduce the number of confusing moments about whether it is your code that is going wrong or whether there is something more sinister happening directly on the server. All the tools that I have mentioned in this post help to do one thing above all, and that is to ease the barrier of understanding between the different functions that are involved in building and maintaining a web application. In my experience it is very easy to say “Well, that’s not my problem”, simply because the two functions involved don’t truly understand the other’s point of view. Software should not only be seen as a way to streamline our own working process or as a debugging tool but also a communication aid to improve the entire lifecycle of a web project. Glimpse is actually the project that I am the designer on and I would love to get your feedback if you do decide to try it out or if you would like to share your own experiences of working on web projects please fill in your details at https://www.surveymk.com/s/joinGlimpse or add a comment below and I will get in touch with you.

Read the article
PeopleSoft at Alliance 2012 Executive Forum

- by John Webb

Guest Posting From Rebekah Jackson This week I jointed over 4,800 Higher Ed and Public Sector customers and partners in Nashville at our annual Alliance conference. I got lost easily in the hallways of the sprawling Gaylord Opryland Hotel. I carried the resort map with me, and I would still stand for several minutes at a very confusing junction, studying the map and the signage on the walls. Hallways led off in many directions, some with elevators going down here and stairs going up there. When I took a wrong turn I would instantly feel stuck, lose my bearings, and occasionally even have to send out a call for help. It strikes me that the theme for the Executive Forum this year outlines a less tangible but equally disorienting set of challenges that our higher education customer’s CIOs are facing: Making Decisions at the Intersection of Business Value, Strategic Investment, and Enterprise Technology. The forces acting upon higher education institutions today are not neat, straight-forward decision points, where one can glance to the right, glance to the left, and then quickly choose the best course of action. The operational, technological, and strategic factors that must be considered are complex, interrelated, messy…and the stakes are high. Michael Horn, co-author of “Disrupting Class: How Disruptive Innovation Will Change the Way the World Learns”, set the tone for the day. He introduced the model of disruptive innovation, which grew out of the research he and his colleagues have done on ‘Why Successful Organizations Fail’. Highly simplified, the pattern he shared is that things start out decentralized, take a leap to extreme centralization, and then experience progressive decentralization. Using computers as an example, we started with a slide rule, then developed the computer which centralized in the form of mainframes, and gradually decentralized to mini-computers, desktop computers, laptops, and now mobile devices. According to Michael, you have more computing power in your cell phone than existed on the planet 60 years ago, or was on the first rocket that went to the moon. Applying this pattern to Higher Education means the introduction of expensive and prestigious private universities, followed by the advent of state schools, then by community colleges, and now online education. Michael shared statistics that indicate 50% of students will be taking at least one on line course by 2014…and by some measures, that’s already the case today. The implication is that technology moves from being the backbone of the campus, the IT department’s domain, and pushes into the academic core of the institution. Innovative programs are underway at many schools like Bellevue and BYU Idaho, joined by startups and disruptive new players like the Khan Academy. This presents both threat and opportunity for higher education institutions, and means that IT decisions cannot afford to be disconnected from the institution’s strategic plan. Subsequent sessions explored this theme. Theo Bosnak, from Attain, discussed the model they use for assessing the complete picture of an institution’s financial health. Compounding the issue are the dramatic trends occurring in technology and the vendors that provide it. Ovum analyst Nicole Engelbert, shared her insights next and suggested that incremental changes are no longer an option, instead fundamental changes are affecting the landscape of enterprise technology in higher ed. Nicole closed with her recommendation that institutions focus on the trends in higher education with an eye towards the strategic requirements and business value first. Technology then is the enabler. The last presentation of the day was from Tom Fisher, Sr. Vice President of Cloud Services at Oracle. Tom runs the delivery arm of the Cloud Services group, and shared his thoughts candidly about his experiences with cloud deployments as well as key issues around managing costs and security in cloud deployments. Okay, we’ve covered a lot of ground at this point, from financials planning, business strategy, and cloud computing, with the possibility that half of the institutions in the US might not be around in their current form 10 years from now. Did I forget to mention that was raised in the morning session? Seems a little hard to believe, and yet Michael Horn made a compelling point. Apparently 100 years ago, 8 of the top 10 education institutions in the world were German. Today, the leading German school is ranked somewhere in the 40’s or 50’s. What will the landscape be 100 years from now? Will there be an institution from China, India, or Brazil in the top 10? As Nicole suggested, maybe US parents will be sending their children to schools overseas much sooner, faced with the ever-increasing costs of a US based education. Will corporations begin to view skill-based certification from an online provider as a viable alternative to a 4 year degree from an accredited institution, fundamentally altering the education industry as we know it?

Read the article
The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

- by david.talamelli

[Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

Read the article
Build 2012, some thoughts..

- by Dennis Vroegop

I think you probably read my rant about the logistics at Build 2012, as posted here, so I am not going into that anymore. Instead, let’s look at the content. (BTW If you did read that post and want some more info then read Nia Angelina’s post about Build. I have nothing to add to that.) As usual, there were good speakers and some speakers who could benefit from some speaker training. I find it hard to understand why Microsoft allows certain people on stage, people who speak English with such strong accents it’s hard for people, especially from abroad, to understand. Some basic training might be useful for some of them. However, it is nice to see that most speakers are project managers, program managers or even devs on the teams that build the stuff they talk about: there was a lot of knowledge on stage! And that means when you ask questions you get very relevant information. I realize I am not the average audience member here, I am regular speaker myself so I tend to look for other things when I am in a room than most audience members so my opinion might differ from others. All in all the knowledge of the speakers was above average but the presentation skills were most of the times below what I would describe as adequate. But let us look at the contents. Since the official name of the conference is Build Windows 2012 it is not surprising most of the talks were focused on building Windows 8 apps. Next to that, there was a lot of focus on Azure and of course Windows Phone 8 that launched the day before Build started. Most sessions dealt with C# and JavaScript although I did see a tendency to use C++ more. Touch. Well, that was the focus on a lot of sessions, that goes without saying. Microsoft is really betting on Touch these days and being a Touch oriented developer I can only applaud this. The term NUI is getting a bit outdated but the principles behind it certainly aren’t. The sessions did cover quite a lot on how to make your applications easy to use and easy to understand. However, not all is touch nowadays; still the majority of people use keyboard and mouse to interact with their machines (or, as I do, use keyboard, mouse AND touch at the same time). Microsoft understands this and has spend some serious thoughts on this as well. It was all about making your apps run everywhere on all sorts of devices and in all sorts of scenarios. I have seen a couple of sessions focusing on the portable class library and on sharing code between Windows 8 and Windows Phone 8. You get the feeling Microsoft is enabling us devs to write software that will be ubiquitous. They want your stuff to be all over the place and they do anything they can to help. To achieve that goal they provide us with brilliant SDK’s, great tooling, a very, very good backend in the form of Windows Azure (I was particularly impressed by the Mobility part of Azure) and some fantastic hardware. And speaking of hardware: the partners such as Acer, Lenovo and Dell are making hardware that puts Apple to a shame nowadays. To illustrate: in Bellevue (very close to Redmond where Microsoft HQ is) they have the Microsoft Store located very close to the Apple Store, so it’s easy to compare devices. And I have to say: the Microsoft offerings are much, much more appealing that what the Cupertino guys have to offer. That was very visible by the number of people visiting the stores: even on the day that Apple launched the iPad Mini there were more people in the Microsoft store than in the Apple store. So, the future looks like it’s going to be fun. Great hardware (did I mention the Nokia Lumia 920? No? It’s brilliant), great software (Windows 8 is in a league of its own), the best dev tools (Visual Studio 2012 is still the champion here) and a fantastic backend (Azure.. need I say more?). It’s up to us devs to fill up the stores with applications that matches this. To summarize: it is great to be a Windows developer. PS. Did I mention Surface RT? Man….. People were drooling all over it wherever I went. It is fantastic :-) Technorati Tags: Build,Windows 8,Windows Phone,Lumia,Surface,Microsoft

Read the article
Thinking differently about BI delivery

- by jamiet

My day job involves implementing Business Intelligence (BI) solutions which, as I have said before, is simply about giving people the information they need to do their jobs. I’m always interested in learning about new ways of achieving that aim and that is my motivation for writing blog entries that are not concerned with SQL or SQL Server per se. Implementing BI systems usually involves hacking together a bunch third party products with some in-house “glue” and delivering information using some shiny, expensive web-based front-end tool; the list of vendors that supply such tools is big and ever-growing. No doubt these tools have their place and of late I have started to wonder whether they can be supplemented with different ways of delivering information. The problem I have with these separate web-based tools is exactly that – they are separate web-based tools. What’s the problem with that you might ask? I’ll explain! They force the information worker to go somewhere unfamiliar in order to get the information they need to do their jobs. Would it not be better if we could deliver information into the tools that those information workers are already using and not force them to go somewhere else? I look at the rise of blogging over recent years and I realise that what made them popular is that people can subscribe to RSS feeds and have information pushed to them in their tool of choice rather than them having to go and find the information for themselves in a tool that has been foisted upon them. Would it not be a good idea to adopt the principle of subscription for the benefit of delivering BI information as well? I think it would and in the rest of this blog entry I’ll outline such a scenario where the power of subscription could be used to enhance the delivery of information to information workers. Typical questions that information workers ask might be: What are my year-on-year sales figures? What was my footfall yesterday? How many widgets have I sold so far today? Each of those questions includes a time element and that shouldn’t surprise us, any BI system that I have worked on includes the dimension of time. Now, what do people use to view and organise their time-oriented information? Its not a trick question, they use a calendar and in the enterprise space more often than not that calendar is managed using Outlook. Given then that information workers are already looking at their calendar in Outlook anyway would it not make sense then to deliver information into that same calendar? Of course it would. Calendars are a great way of visualising information such as sales figures. Observe: Just in this single screenshot I have managed to convey a multitude of information. The information worker can see, at a glance, information about hourly/daily/weekly/monthly sales and, moreover, he/she is viewing that information right inside the tool that they use every day. There is no effort on the part of him/her, the information just appears hour after hour, day after day. Taking the idea further, each one of those calendar items could be a mini-dashboard in its own right. Double-clicking on an item could show a plethora of other information about that time slot such as breaking the sales down per region or year-over-year comparisons. Perhaps the title could employ a sparkline? Loads of possibilities. The point is that calendars are a completely natural way to visualise information; we should make more use of them! The real beauty of delivering information using calendars for us BI developers is that it should be so easy. In the case of Outlook we don’t need to write complicated VBA code that can go and manipulate a person’s calendar, simply publishing data in a format that Outlook can understand is sufficient and happily such formats already exist; iCalendar is the accepted format and the even more flexible xCalendar is hopefully on its way as well. I’d like to make one last point and this one is with my SQL Server hat on. Reporting Services 2008 R2 introduced the ability to publish data as subscribable Atom feeds so it seems logical that it could also be a vehicle for delivering calendar feeds too. If you think this would be a good idea go and vote for it at Publish data as iCalendar feeds and please please please add some comments (especially if you vote it down). Work smarter, not harder! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article
Synergy - easy share of keyboard and mouse between multiple computers

Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

Read the article
Can't change text color in Microsoft Word 2010

- by Wesley

I have Microsoft Office 2010 32-bit running on Windows 7 32-bit. When text is highlighted and a color is selected from the mini-toolbar or the ribbon, the text does not change color. If I change the color for multiple words, and select a different color for each word, the toolbar and ribbon will reflect each of the different colors that I chose, however it is not displayed in the document. So it appears that Word is aware of the text color and not as if it is simply not applying the change. What may be causing this inability to view text colors and how might I fix it? My only troubleshooting attempt so far has been to perform a repair installation of Office. EDIT 1 I created a document, typed a word, selected it and changed the color. I then saved the document as HTML. The text did not change color. This is the HTML in the document: <html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"> <head> <meta http-equiv=Content-Type content="text/html; charset=windows-1252"> <meta name=ProgId content=Word.Document> <meta name=Generator content="Microsoft Word 14"> <meta name=Originator content="Microsoft Word 14"> <link rel=File-List href="Document_1_files/filelist.xml">  <link rel=themeData href="Document_1_files/themedata.thmx"> <link rel=colorSchemeMapping href="Document_1_files/colorschememapping.xml">  <style>  </style>  </head> <body lang=EN-US style='tab-interval:.5in'> <div class=WordSection1> <p class=MsoNormal><o:p> </o:p></p> <p class=MsoNormal><span class=GramE><span style='color:red'>blah</span></span><span style='color:red'><o:p></o:p></span></p> </div> </body> </html> EDIT 2 I recorded a macro and did the following: Typed a word Selected the word Changed the color. Oddly, I had some strange issues while the macro was recorded. I could not select text with my cursor. I had to select the text with control a and then apply the color change. I then couldn't deselect the selected text. Nonetheless, the text showed that it had a different color in the toolbar, but the color did not display in the document. Here's the macro: Sub Change_Text_Color() ' ' Change_Text_Color Macro ' ' Selection.TypeText Text:="Test Text" Selection.WholeStory Selection.WholeStory End Sub EDIT 3 I opened WordPad and created some text and was able to successfully change the color. If I copy and paste the colored text into a Word 2010 document, the color is lost. However, if you place the I-beam in the text and then look at the color selection drop-down menu on the ribbon or mini-toolbar, you can see that the proper color that the text should be in is highlighted. Edit 4 I uninstalled the entire Office 2010 Suite, rebooted and then reinstalled the suite. No change in behavior. Edit 5 Text cannot be colored in Excel either.

Read the article
Windows 7 laptop with two active network connections will not perform DNS AAAA lookup under certain conditions

- by Jeff Loughridge

My laptop has two network interfaces. The Ethernet interface connects directly to my provider's edge router. It obtains an IPv6 address via SLAAC. I manually set an IPv6 DNS server. The wireless interface connects to a CPE router that doesn't understand IPv6. If the wireless interface is disabled, I can reach the IPv6 Internet with no problems using the Ethernet interface. I run into problems when both interfaces are enabled and the wireless interface get its IPv4 DNS server via DHCP. Let's look at two scenarios. Wireless interface obtains IPv4 DNS server via DHCP - The CPE router (192.168.0.1) sends its address as the DNS server. In this scenario, Windows 7 will not perform AAAA lookups. The browser uses IPv4 transit to reach dual stack web sites. I can't reach IPv6-only web sites using domain names. I can reach IPv6-enabled web sites using IPv6 literals instead of the domain name. Wireless interface is manually configured with OpenDNS DNS server - Windows 7 performs AAAA lookups using IPv6 transit (via the Ethernet). Everything works fine. My dual homed set-up is definitely not standard. Still, the behavior is very strange to me. A valid IPv6 interface exists in my Ethernet interface. Why won't Windows attempt AAAA lookups in scenario #1? I've included the output of ipconfig /all and netstat -rn. C:\Program Files\Console>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : jake Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : res.openband.net Wireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : DW1520 Wireless-N WLAN Half-Mini Card Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::fc39:9293:7d01:4a75%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.105(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, July 11, 2012 7:35:21 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 9:49:46 AM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 364956472 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Connection Physical Address. . . . . . . . . : 5C-26-0A-03-23-5C DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2607:2600:1:850:c0e9:211a:fd05:4e0b(Preferred) Temporary IPv6 Address. . . . . . : 2607:2600:1:850:3d29:1839:62db:c4c1(Preferred) Link-local IPv6 Address . . . . . : fe80::c0e9:211a:fd05:4e0b%12(Preferred) IPv4 Address. . . . . . . . . . . : 10.52.2.51(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.254.0 Lease Obtained. . . . . . . . . . : Monday, July 09, 2012 8:55:07 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 7:30:05 AM Default Gateway . . . . . . . . . : fe80::214:6aff:fe51:7f3f%12 10.52.2.1 DHCP Server . . . . . . . . . . . : 216.40.77.244 DNS Servers . . . . . . . . . . . : 2620:0:ccc::2 2620:0:ccd::2 216.40.77.126 216.40.77.244 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::4c61:495b:229e:281e%14(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.40.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 469782614 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f996:61eb:8c00:45e6%15(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.17.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Program Files\Console>netstat -rn =========================================================================== Interface List 17...c0 cb 38 06 54 f9 ......Microsoft Virtual WiFi Miniport Adapter 13...c0 cb 38 06 54 f9 ......DW1520 Wireless-N WLAN Half-Mini Card 12...5c 26 0a 03 23 5c ......Intel(R) 82577LM Gigabit Network Connection 11...5c ac 4c f8 b8 55 ......Bluetooth Device (Personal Area Network) 14...00 50 56 c0 00 01 ......VMware Virtual Ethernet Adapter for VMnet1 15...00 50 56 c0 00 08 ......VMware Virtual Ethernet Adapter for VMnet8 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.52.2.1 10.52.2.51 10 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.105 100 10.52.2.0 255.255.254.0 On-link 10.52.2.51 261 10.52.2.51 255.255.255.255 On-link 10.52.2.51 261 10.52.3.255 255.255.255.255 On-link 10.52.2.51 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.105 306 192.168.0.105 255.255.255.255 On-link 192.168.0.105 306 192.168.0.255 255.255.255.255 On-link 192.168.0.105 306 192.168.17.0 255.255.255.0 On-link 192.168.17.1 276 192.168.17.1 255.255.255.255 On-link 192.168.17.1 276 192.168.17.255 255.255.255.255 On-link 192.168.17.1 276 192.168.40.0 255.255.255.0 On-link 192.168.40.1 276 192.168.40.1 255.255.255.255 On-link 192.168.40.1 276 192.168.40.255 255.255.255.255 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.52.2.51 261 224.0.0.0 240.0.0.0 On-link 192.168.0.105 306 224.0.0.0 240.0.0.0 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 192.168.17.1 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.52.2.51 261 255.255.255.255 255.255.255.255 On-link 192.168.0.105 306 255.255.255.255 255.255.255.255 On-link 192.168.40.1 276 255.255.255.255 255.255.255.255 On-link 192.168.17.1 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 12 261 ::/0 fe80::214:6aff:fe51:7f3f 1 306 ::1/128 On-link 12 13 2607:2600:1:850::/64 On-link 12 261 2607:2600:1:850:3d29:1839:62db:c4c1/128 On-link 12 261 2607:2600:1:850:c0e9:211a:fd05:4e0b/128 On-link 12 261 fe80::/64 On-link 13 281 fe80::/64 On-link 14 276 fe80::/64 On-link 15 276 fe80::/64 On-link 14 276 fe80::4c61:495b:229e:281e/128 On-link 12 261 fe80::c0e9:211a:fd05:4e0b/128 On-link 15 276 fe80::f996:61eb:8c00:45e6/128 On-link 13 281 fe80::fc39:9293:7d01:4a75/128 On-link 1 306 ff00::/8 On-link 12 261 ff00::/8 On-link 13 281 ff00::/8 On-link 14 276 ff00::/8 On-link 15 276 ff00::/8 On-link =========================================================================== Persistent Routes: None

Read the article
Installation of SAP Web Application Server 6.20 in Windows Vista

- by karthikeyan b

I tried installing trial version of sap netweaver 7.1 in windows vista in my laptop but i couldnt succeed there.. then i tried installing SAP WEB AS 6.20 now.I am able to succeed till 91% completion.After that i get some errors and the installation stops... if anybody have any experiences please share.it will be really helpful.I mentioned the complete log details below. nfo: INSTGUI.EXE Protocol version is 10. Message checksum is 7613888. Info: INSTGUI MessageFile Start message loading... Info: INSTGUI MessageFile Finished message loading. Info: InstController Prepare {} {} R3SETUP Version: Apr 24 2002 Info: InstController Prepare {} {} Logfile will be set to E:\R3SETUP\BSP.log Check E:\R3SETUP\BSP.log for further messages. Info: CommandFileController SyFileVersionSave {} {} Saving original content of file E:\R3SETUP\BSP.R3S ... Warning: CommandFileController SyFileCopy {} {} Function CopyFile() failed at location SyFileCopy-681 Warning: CommandFileController SyFileCopy {} {} errno: 5: Access is denied. Warning: CommandFileController SyFileCreateWithPermissions {} {} errno: 13: Permission denied Warning: CommandFileController SyPermissionSet {} {} Function SetNamedSecurityInfo() failed for E:\R3SETUP\BSP.R3S at location SyPermissionSet-2484 Warning: CommandFileController SyPermissionSet {} {} errno: 5: Access is denied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA2 will not be copied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Warning: ADADBINSTANCE_IND_ADA GetConfirmationFor 2 58 Cleanup database instance BSP for new installation. Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 54 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 54 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1146 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1146 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 718 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 718 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA2 will not be copied. Info: InstController MakeStepsDeliver 2 309 Requesting Information on CD-ROMs Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA InternalWarmKeyCheck 2 333 The installation phase is starting now. Please look in the log file for further information about current actions. Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 99 Defining Key Values Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 58 Requesting Setup Details Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1206 Setting Users for Single DB landscape Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 75 Stopping the SAP DB Instance Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 247 Stopping the SAP DB remote server Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 1195 Can not read from Z:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: SAPDBSETCDPATH_IND_IND and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Info: SAPDBINSTALL_IND_ADA SyCoprocessCreate 2 1195 Creating coprocess E:\sapdb\NT\I386\sdbinst.exe ... Info: SAPDBINSTALL_IND_ADA ExecuteDo 2 1195 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 120 Extracting SAP DB Tools Software Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 242 Starting VSERVER Info: ADAXSERVER_NT_ADA SyCoprocessCreate 2 242 Creating coprocess C:\sapdb\programs\bin\x_server.exe ... Info: ADAXSERVER_NT_ADA ExecuteDo 2 242 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from Y:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA2 and key: DATA1_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from X:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA3 and key: DATA2_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 815 We tried to find the label SAPDB:MINI-WAS-DEMO:620:KERNEL for CD KERNEL in path E:. But the check was not successfull. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXE and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 815 Extracting the SAP Executables Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 223 Setting new Rundirectory. Info: ADADBREGISTER_IND_ADA SyCoprocessCreate 2 223 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADADBREGISTER_IND_ADA ExecuteDo 2 223 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 ADASETDEVSPACES_IND_ADA Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 10 Performing Service BCHECK Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_DEFAULT_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_DEFAULT_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_COLD_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_COLD_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_WARM_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_WARM_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 760 Creating the Default Profile Info: DEFAULTPROFILE_IND_IND SyFileVersionSave 2 760 Saving original content of file C:\MiniWAS\DEFAULT.PFL ... Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1267 Modifying or Creating the TPPARAM File Info: TPPARAMMODIFY_NT_ADA SyFileVersionSave 2 1267 Saving original content of file C:\MiniWAS\trans\bin\TPPARAM ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1111 Creating the Service Entry for the Dispatcher Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Checking service name sapdp00, protocol tcp, port number 3200 ... Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Port name sapdp00 is known and the port number 3200 is equal to the existing port number 3200 Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1122 Creating the Service Entry for the Message Server Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Checking service name sapmsBSP, protocol tcp, port number 3600 ... Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Port name sapmsBSP is known and the port number 3600 is equal to the existing port number 3600 Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1114 Creating the Service Entry for the Gateway Service Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Checking service name sapgw00, protocol tcp, port number 3300 ... Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Port name sapgw00 is known and the port number 3300 is equal to the existing port number 3300 Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSP Info: PISTARTBSP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\Desktop. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSPGROUP Info: PISTARTBSPGROUP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Mini SAP Web Application Server. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 54 Starting SAP DB to Mode WARM Error: Command

Read the article
Python: How to read huge text file into memory

- by asmaier

I'm using Python 2.6 on a Mac Mini with 1GB RAM. I want to read in a huge text file $ ls -l links.csv; file links.csv; tail links.csv -rw-r--r-- 1 user user 469904280 30 Nov 22:42 links.csv links.csv: ASCII text, with CRLF line terminators 4757187,59883 4757187,99822 4757187,66546 4757187,638452 4757187,4627959 4757187,312826 4757187,6143 4757187,6141 4757187,3081726 4757187,58197 So each line in the file consists of a tuple of two comma separated integer values. I want to read in the whole file and sort it according to the second column. I know, that I could do the sorting without reading the whole file into memory. But I thought for a file of 500MB I should still be able to do it in memory since I have 1GB available. However when I try to read in the file, Python seems to allocate a lot more memory than is needed by the file on disk. So even with 1GB of RAM I'm not able to read in the 500MB file into memory. My Python code for reading the file and printing some information about the memory consumption is: #!/usr/bin/python # -*- coding: utf-8 -*- import sys infile=open("links.csv", "r") edges=[] count=0 #count the total number of lines in the file for line in infile: count=count+1 total=count print "Total number of lines: ",total infile.seek(0) count=0 for line in infile: edge=tuple(map(int,line.strip().split(","))) edges.append(edge) count=count+1 # for every million lines print memory consumption if count%1000000==0: print "Position: ", edge print "Read ",float(count)/float(total)*100,"%." mem=sys.getsizeof(edges) for edge in edges: mem=mem+sys.getsizeof(edge) for node in edge: mem=mem+sys.getsizeof(node) print "Memory (Bytes): ", mem The output I got was: Total number of lines: 30609720 Position: (9745, 2994) Read 3.26693612356 %. Memory (Bytes): 64348736 Position: (38857, 103574) Read 6.53387224712 %. Memory (Bytes): 128816320 Position: (83609, 63498) Read 9.80080837067 %. Memory (Bytes): 192553000 Position: (139692, 1078610) Read 13.0677444942 %. Memory (Bytes): 257873392 Position: (205067, 153705) Read 16.3346806178 %. Memory (Bytes): 320107588 Position: (283371, 253064) Read 19.6016167413 %. Memory (Bytes): 385448716 Position: (354601, 377328) Read 22.8685528649 %. Memory (Bytes): 448629828 Position: (441109, 3024112) Read 26.1354889885 %. Memory (Bytes): 512208580 Already after reading only 25% of the 500MB file, Python consumes 500MB. So it seem that storing the content of the file as a list of tuples of ints is not very memory efficient. Is there a better way to do it, so that I can read in my 500MB file into my 1GB of memory?

Read the article
Nested attributes in the index view?

- by user283179

I seem to be getting error: uninitialized constant Style::Pic when I'm trying to render a nested object in to the index view the show view is fine. class Style < ActiveRecord::Base #belongs_to :users has_many :style_images, :dependent => :destroy accepts_nested_attributes_for :style_images, :reject_if => proc { |a| a.all? { |k, v| v.blank?} } #found this here http://ryandaigle.com/articles/2009/2/1/what-s-new-in-edge-rails-nested-attributes has_one :cover, :class_name => "Pic", :order => "updated_at DESC" accepts_nested_attributes_for :cover end class StyleImage < ActiveRecord::Base belongs_to :style #belongs_to :style_as_cover, :class_name => "Style", :foreign_key => "style_id" has_attached_file :pic, :styles => { :small => "200x0>", :normal => "600x> " } validates_attachment_presence :pic #validates_attachment_size :pic, :less_than => 5.megabytes end <% for style_image in @style.style_images %> <li><%= style_image.caption %></li> <div id="show_photo"> <%= image_tag style_image.pic.url(:normal) %></div> <% end %> As you can see from the above The main model style has many style_images, all these style_images are displayed in the show view but, in the the index view I wish to show one image which has been name and will act as a cover that is displayed for each style. in the index controller I have tried the following: class StylesController < ApplicationController layout "mini" def index @styles = Style.find(:all, :inculde => [:cover,]).reverse respond_to do |format| format.html # index.html.erb format.xml { render :xml => @styles } end end and the index <% @styles.each do |style| %> <%=image_tag style.cover.pic.url(:small) %> <% end %> class StyleImage < ActiveRecord::Base belongs_to :style #belongs_to :style_as_cover, :class_name => "Style", :foreign_key => "style_id" has_attached_file :pic, :styles => { :small => "200x0>", :normal => "600x> " } validates_attachment_presence :pic #validates_attachment_size :pic, :less_than => 5.megabytes end In the style_images table there is an cover_id also. From the about you can see that I have included the cover in the controller and the model. I have know idea where I'm going wrong here! If any one can help please do!

Read the article
In Protobuf-net how can I pass an array of type object with objects of different types inside, knowi

- by cloudraven

I am trying to migrate existing code that uses XmlSerializer to protobuf-net due to the increased performance it offers, however I am having problems with this specific case. I have an object[] that includes parameters that are going to be sent to a remote host (sort of a custom mini rpc facility). I know the set of types from which these parameters can be, but I cannot tell in advance in which order they are going to be sent. I have three constraints. The first is that I am running in Compact Framework, so I need something that works there. Second, as I mentioned performance is a big concern (on the serializing side) so I would rather avoid using a lot of reflection there if possible. And the most important is that I care about the order in which this parameters were sent. Using XmlSerializer it was easy just adding XmlInclude, but for fields there is nothing equivalent as far as I know in Protobuf-net. So, is there a way to do this? Here is a simplified example. [Serializable] [XmlInclude(typeof(MyType1)), XmlInclude(typeof(MyType2)), XmlInclude(typeof(MyType3)) public class Message() { public object[] parameters; public Message(object[] parms) { parameters = parms; } } Message m = new Message(new object[] {MyType1(), 33, "test", new MyType3(), new MyType3()}); MemoryStream ms = new MemoryStream(); XmlSerializer xml = new XmlSerializer(typeof(Message)); xml.Serialize(ms,xml); That will just work with XmlSerializer, but if I try to convert it to protobuf-net I will get a "No default encoding for Object" message. The best I came up with is to use generics and [ProtoInclude] as seen in this example. Since I can have different object types within the array this doesn't quite make it. I added a generic List for each potential type and a property with [ProtoIgnore] with type object[] to add them and get them. I have to use reflection when adding them (to know in which array to put each item) which is not desirable and I still can't preserve the ordering as I just extract all the items on each list one by one and put them into a new object[] array on the property get. I wonder if there is a way to accomplish this?

Read the article
emulator crashes

- by Dave

I am setting up an Android environment for the first time on Eclipse. I have many years of Eclipse experience, but new to Android. This is being done on an Apple Mac Mini, running MacOSX 10.6.3. I am using the latest Eclipse Classic, version 3.5.2. I am trying to get the tiny hello world program running. When I run it, I get the following in the console window of Eclipse: [2010-06-12 13:48:08 - HelloAndroid] Automatic Target Mode: launching new emulator with compatible AVD 'Android2.2AVD' [2010-06-12 13:48:08 - HelloAndroid] Launching a new emulator with Virtual Device 'Android2.2AVD' [2010-06-12 13:48:11 - HelloAndroid] New emulator found: emulator-5554 [2010-06-12 13:48:11 - HelloAndroid] Waiting for HOME ('android.process.acore') to be launched... [2010-06-12 13:48:12 - Emulator] 2010-06-12 13:48:12.783 emulator[50495:903] Warning once: This application, or a library it uses, is using NSQuickDrawView, which has been deprecated. Apps should cease use of QuickDraw and move to Quartz. [2010-06-12 13:48:19 - HelloAndroid] emulator-5554 disconnected! Cancelling 'com.example.helloandroid.HelloAndroid activity launch'! The emulator crashes with the following info. I have followed all the instructions for running the hello world sample. Anyone have any ideas? Process: emulator [50398] Path: /Users/jeremy/android-sdk-mac_86/tools/emulator Identifier: emulator Version: ??? (???) Code Type: X86 (Native) Parent Process: eclipse [50388] Date/Time: 2010-06-12 13:28:38.595 -0400 OS Version: Mac OS X 10.6.3 (10D573) Report Version: 6 Interval Since Last Report: 363037 sec Crashes Since Last Report: 9 Per-App Crashes Since Last Report: 7 Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00000000007fd000 Crashed Thread: 4 Thread 0: Dispatch queue: com.apple.main-thread 0 emulator 0x000eed4e helper_set_cp15 + 30 Thread 1: 0 libSystem.B.dylib 0x9020bbd2 __workq_kernreturn + 10 1 libSystem.B.dylib 0x9020c168 _pthread_wqthread + 941 2 libSystem.B.dylib 0x9020bd86 start_wqthread + 30 Thread 2: Dispatch queue: com.apple.libdispatch-manager 0 libSystem.B.dylib 0x9020cb42 kevent + 10 1 libSystem.B.dylib 0x9020d25c _dispatch_mgr_invoke + 215 2 libSystem.B.dylib 0x9020c719 _dispatch_queue_invoke + 163 3 libSystem.B.dylib 0x9020c4be _dispatch_worker_thread2 + 240 4 libSystem.B.dylib 0x9020bf41 _pthread_wqthread + 390 5 libSystem.B.dylib 0x9020bd86 start_wqthread + 30 Thread 3: 0 libSystem.B.dylib 0x901e635a semaphore_timedwait_signal_trap + 10 1 libSystem.B.dylib 0x90213ea1 _pthread_cond_wait + 1066 2 libSystem.B.dylib 0x90242a28 pthread_cond_timedwait_relative_np + 47 3 com.apple.audio.CoreAudio 0x9056f965 CAGuard::WaitFor(unsigned long long) + 219 4 com.apple.audio.CoreAudio 0x90572997 CAGuard::WaitUntil(unsigned long long) + 289 5 com.apple.audio.CoreAudio 0x90570294 HP_IOThread::WorkLoop() + 1892 6 com.apple.audio.CoreAudio 0x9056fb2b HP_IOThread::ThreadEntry(HP_IOThread*) + 17 7 com.apple.audio.CoreAudio 0x9056fa42 CAPThread::Entry(CAPThread*) + 140 8 libSystem.B.dylib 0x90213a19 _pthread_start + 345 9 libSystem.B.dylib 0x9021389e thread_start + 34 Thread 4 Crashed: 0 emulator 0x00040380 audioInDeviceIOProc + 96 Thread 4 crashed with X86 Thread State (32-bit): eax: 0x00000000 ebx: 0x007fd000 ecx: 0x000001fe edx: 0x0198f3f0 edi: 0x00000200 esi: 0x01119850 ebp: 0x01119800 esp: 0xb020fad0 ss: 0x0000001f efl: 0x00010212 eip: 0x00040380 cs: 0x00000017 ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037 cr2: 0x007fd000

Read the article
Trouble cross-referencing two XML child nodes in AS3

- by Dwayne

I am building a mini language translator out of XML nodes and Actionscript 3. I have my XML ready. It contains a series of nodes with two children in them. Here is a sample: <translations> <entry> <english>man</english> <cockney>geeza</cockney> </entry> <entry> <english>woman</english> <cockney>lily</cockney> </entry> </translations> The AS3 part consist of one input box named "textfield_txt" where the English word will be typed in. An output text field for the translation called "cockney_txt". Finally, one button to execute the translation called "generate_mc". The idea is to have actionscript look through the XML for key English words after the user types it in the "textfield", cross-freferences the children then returns the Cockney translation as a value. The trouble is, when I test it I get no response or error messages- it's completely silent. I'm not sure what I'm doing wrong. At present, I have setup a conditional statement to tell me whether the function works or not. The result is, no it's not! Here's the code below. I hope someone can help. Cheers! generate_mc.buttonMode=true; var English:String; var myXML:XML; var myLoader:URLLoader = new URLLoader(); myLoader.load(new URLRequest("Language.xml")); myLoader.addEventListener(Event.COMPLETE, processXML); function processXML(e:Event):void { myXML = new XML(e.target.data); } generate_mc.addEventListener(MouseEvent.CLICK, onClick); function onClick(event:MouseEvent) { English = textfield.text; cockney_txt.text = myXML.translations.entry.cockney; if(textfield.text.toLowerCase() == myXML.translations.entry.english.toLowerCase){ //return myXML.translations.entry.cockney; trace("success"); }else{ trace("try again!"); // ***I get this as a result } }

Read the article

Search Results

Search found 1362 results on 55 pages for 'mini how tos'.

Page 51/55 | < Previous Page | 47 48 49 50 51 52 53 54 55 | Next Page >

- by Bart Silverstrim

- by user29336

- by CarpeNoctem

- by Matt H

- by user143041

- by DigitalGeekery

- by thatjeffsmith

- by DigitalGeekery

- by pinaldave

- by Chris Hoffman

- by red(at)work

- by Pete Hotchkin

- by John Webb

- by david.talamelli

- by Dennis Vroegop

- by jamiet

- by Wesley

- by Jeff Loughridge

- by karthikeyan b

- by asmaier

- by user283179

- by cloudraven

- by Dave

- by Dwayne

< Previous Page | 47 48 49 50 51 52 53 54 55 | Next Page >