Search Results

Search found 5279 results on 212 pages for 'mysqld conf'.

Page 51/212 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • MPD to play music to single channel of my multi-channel card?

    - by hany tawfik
    I installed an Ubuntu 12-04 LTS server for a special background music application of mine, where I am using the server with an Asus Xonar DS sound card. The installation is successful, the MPD is working, the sound card is working with Alsa and its libraries installed accept for Alsa-oss. Alsamixer is working fine with left/right sides of each channel volume control through Q/Z letters shortcut when alsamixer is open in terminal . using the command " speaker-test -Dplug:surround71 -c8 -l1 -twav " I can hear every voice message coming out from the card at the right connector, so "front right/ front left" voice message are coming from first output in the card back, while the other outputs are silent..so on. The problem is that MPD is playing on all outputs simultaneously the same audio. I have been trying various configurations for the last 12 days with out any success, including trying to put mappings in the /etc/asound.conf Can any body help me achieve the above, or direct me to the right configuration of MPD or asound.conf

    Read the article

  • Hostapd to connect laptop to Android

    - by Kmegamind
    i am trying to set up my laptop as an access point for my Android to use WiFi, so i knew that ubuntu sets the network as Ad-Hoc which is not discoverable by android, So i tried the method explained here -which i found on many other websites- but when i run hostapd.conf this error appears : nl80211: Failed to set interface wlan0 into AP mode nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0x8e488f8 user_data=0x8e48ea0 handler=0x807c5e0 ELOOP: remaining socket: sock=6 eloop_data=0x8e4aca8 user_data=(nil) handler=0x8086770 this is how my hostapd.conf looks like : interface=wlan0 driver=nl80211 ssid=Any_SSID_name hw_mode=g channel=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=Any_password wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP and this is my wireless card info : description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:73:51:f1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:f0300000-f0303fff

    Read the article

  • setting up Ubuntu 10.10 as paravirtualized guest in Xen on RHEL5 host - what kernel?

    - by kostmo
    I've discovered the tool ubuntu-vm-builder, which I've installed and then invoked on an Ubuntu workstation as: sudo vmbuilder xen ubuntu --suite maverick --flavour virtual --arch amd64 --mem=512 --rootsize 8192 This workstation is not the intended target host of the virtual machine, however; I would like to host the guest on a Red Hat Enterprise Linux 5 machine that is running Xen 3.0.3. The output of this command appears to be a folder named ubuntu-xen containing three files: tmpXXXXXX, a very large file which I assume is the root partition image tmpYYYYYY, a somewhat large file which I assume is the swap partition image xen.conf, a text file I have copied the xen.conf file to the RHEL server's /etc/xen directory under the new name newvm, adjusting the paths of tempXXXXXX and tempYYYYYYin the file after also copying them from my local workstation to the RHEL server. When I launch the Virtual Machine Manager virt-manager, I can see the newvm virtual machine listed underneath the Dom0 machine. When I try to start newvm, I get the error: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: None') Indeed, there exists an entry kernel = 'None' in the xen.conf file. How do I find out what the path of the kernel should be? Is this path supposed to be to a kernel stored on the local filesystem of the RHEL5 host, or is it supposed to be a path inside the guest image? I see that the vmbuilder command provides for a --xen-kernel option, along with a --xen-ramdisk option, but I'm not sure what to use for either. I think I should be able to get this to work, since Ubuntu is said to be supported as a Xen guest, even though the Xen 4.0.1 docs state support for only a limited set of distributions, Ubuntu excluded. Update 1 When running vmbuilder on my local workstation, I did observe an output line saying: Calling hook: install_kernel and later, output lines saying: update-initramfs: Generating /boot/initrd.img-2.6.35-23-virtual [...] run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.35-23-virtual /boot/vmlinuz-2.6.35-23-virtual So in the xen.conf file, I tried setting the lines: kernel = '/boot/vmlinuz-2.6.35-23-virtual' ramdisk = '/boot/initrd.img-2.6.35-23-virtual' When trying to start the VM, I got an error similar to last time: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: /boot/vmlinuz-2.6.35-23-virtual') This makes me think that the RHEL5 machine is looking for local files, rather than a file within the binary guest disk image. After running sudo updatedb on my workstation, neither of those files were found. If the vmbuilder tool had tried to install them, it must have failed. Update 2 I was able to extract the kernel and initrd images from the guest disk binary by mounting it: mkdir mnt_tmp sudo mount ubuntu-xen/tmpXXXXXX mnt_tmp/ -o loop cp mnt_tmp/boot/vmlinuz-2.6.35-23-virtual virtual_kernel_ubuntu cp mnt_tmp/boot/initrd.img-2.6.35-23-virtual virtual_initrd_ubuntu These two files I copied to the RHEL5 server, and edited the xen.conf file to point to them as kernel and ramdisk. With this done, I could "run" the newvm virtual machine from within virt-manager, but was met with the message Console Not Configured For Guest when I double clicked the entry to open the Virtual Machine Console. As suggested by a forum, I then added the line vfb = [ 'type=vnc' ] to the configuration file, recreated the virtual machine (a ~10 min process), and this time got the message: Connecting to console for guest This remained indefinitely; after selecting View - Serial Console, I found a kernel panic: [5442621.272173] Kernel panic - not syncing: Attempted to kill the idle task! [5442621.272179] Pid: 0, comm: swapper Tainted: G D 2.6.35-23-virtual #41-Ubuntu [5442621.272184] Call Trace: [5442621.272191] [<ffffffff815a1b81>] panic+0x90/0x111 [5442621.272199] [<ffffffff810652ee>] do_exit+0x3be/0x3f0 [5442621.272204] [<ffffffff815a5e20>] oops_end+0xb0/0xf0 [5442621.272211] [<ffffffff8100ddeb>] die+0x5b/0x90 [5442621.272216] [<ffffffff815a56c4>] do_trap+0xc4/0x170 [5442621.272221] [<ffffffff8100ba35>] do_invalid_op+0x95/0xb0 [5442621.272227] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272232] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272239] [<ffffffff815a48fe>] ? _raw_spin_unlock_irqrestore+0x1e/0x30 [5442621.272247] [<ffffffff8108dfb7>] ? tick_broadcast_oneshot_control+0xc7/0x120 [5442621.272253] [<ffffffff8100ad5b>] invalid_op+0x1b/0x20 [5442621.272259] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272264] [<ffffffff813084e0>] ? intel_idle+0x70/0x180 [5442621.272269] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272275] [<ffffffff8148a147>] cpuidle_idle_call+0xa7/0x140 [5442621.272281] [<ffffffff81008d93>] cpu_idle+0xb3/0x110 [5442621.272286] [<ffffffff815873aa>] rest_init+0x8a/0x90 [5442621.272291] [<ffffffff81b04c9d>] start_kernel+0x387/0x390 [5442621.272297] [<ffffffff81b04341>] x86_64_start_reservations+0x12c/0x130 [5442621.272303] [<ffffffff81b08002>] xen_start_kernel+0x55d/0x561 Update 3 I tried an i386 architecture instead of amd64, but got the same kernel panic. Also, it seems the Virtual Machine Manager pays attention to the format of the filename of the kernel; for the same kernel binary, I tried simply naming it vmlinuz-virtual, which threw out an error box about an invalid kernel. When I named it vmlinuz-2.6.35-23-virtual, it did not throw the error, but it did still result in the kernel panic shortly thereafter.

    Read the article

  • eGalax Touchscreen not working Jolicloud 1.2

    - by craigsmith86
    I have an eGalax touchscreen on an Acer Aspire One running Jolicloud 1.2 I have had success getting this touchscreen to work correctly on ubuntu 10.04NBR, 11.04 and Kubuntu 12.04 and Puppy Linux, so I am pretty happy with how it SHOULD be done. However, I cannot get it to calibrate correctly or remember calibration settings. I have installed the eGalax utility (all available versions) and it does not recognize the screen. Xinput_calibrator works but the config cannot be made permanent. Problems I have identified: -Joli doesn't have an xorg.conf file and does not use xorg.conf.d for evdev configuration -Setting configs through Hal doesn't work anymore The best I can get is a poorly adjusted touchscreen with a reversed Y axis. Any help greatly appreciated

    Read the article

  • How to use PAM to restrict HTTP access for some users?

    - by MaxB
    I've read that PAM can be used to restrict HTTP access for some users, but I can't figure out how to do it in Ubuntu 12.04. The /etc/security/time.conf man page contains this example: All users except for root are denied access to console-login at all times: login ; tty* & !ttyp* ; !root ; !Al0000-2400 For this to work, /etc/pam.d/login needs to have a line account requisite pam_time.so This example works, and I tried to adapt it to limit HTTP access from the console. I added http ; tty* & !ttyp* ; !root ; !Al0000-2400 to /etc/security/time.conf, and created /etc/pam.d/http with account requisite pam_time.so This doesn't work. I can still use wget as non-root from the console.

    Read the article

  • local user cannot access vsftpd server

    - by Zloy Smiertniy
    I'm currently running a vsftpd server and I added the necessary configurations in vsftpd.conf so that local users can use clients like FileZilla to manage their homes in a server. I found out that only users in the sudoers list access without a problem only they can't download the files, but users that are not sudoers cannot even access their homes from a client but they can access by a web browser using the FTP protocol and they can only access their home directories (as intented) Im running a fedora 14 on my server and my vsftpd.conf looks like this: # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to GAMBITA FTP service # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). chroot_local_user=YES chroot_list_enable=YES # (default follows) chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES use_localtime=YES Anyone has an idea of what might be happening? Nothing concerning vsftpd is written in any log

    Read the article

  • MAMP Pro Installed On Mavericks 10.9

    - by cnps
    I have MAMP Pro Installed. I'm well aware with the advanced features of MAMP Pro I can change to different types of Hosts, but I wanted to know why my previous method would not work within mavericks. This was my usual working method in 10.8, but now with 10.9 it's a headache. The previous method would: Write a custom address with the host address: "#Virtual Hosts" 127.0.0.1 nameofsite.local go to /Applications/MAMP/conf/apache and open the httpd.conf file, scroll to the bottom and then add NameVirtualHost * DocumentRoot "/Applications/MAMP/htdocs" ServerName localhost DocumentRoot "/Users/Klimt/Sites/siteoffolder" ServerName clientA.local make sure the ports is set to 80, 443, 3306. reset MAMP PRO and then usually type in the url address and it's gold from there. any help?

    Read the article

  • CakePHP 'Cake is NOT able to connect to the database'

    - by kand
    I've looked at this post about a similar issue: CakePHP: Can't access MySQL database and I've tried everything they mentioned in there including: Changing my database.php so that the 'port' attribute for both $default and $test are the location of my mysqld.sock file Changing the 'port' attribute to the actual integer that represents the port in my my.cnf mysql config Changing the mysql socket locations in php.ini to the location of my mysqld.sock file I'm using ubuntu 11.04, apache 2.2.17, mysql 5.1.54, and CakePHP 1.3.10. My install of mysql and apache don't seem to match any conventions, as in, all the config files are there, they are all just in really weird places--I'm not sure why that is, but I've tried reinstalling both programs multiple times with the same results... At any rate, I can log into mysql from the terminal and use it normally, and apache is working because I can see the CakePHP default homepage. I just can't get it to change the message 'Cake is NOT able to connect to the database'. SOLVED: Figured it out, had to change php.ini so that extension_dir pointed to the correct directory and had to add a line extension=mysql.so.

    Read the article

  • System Slow After Uprading Ubuntu

    - by Aragon N
    i have an ubuntu network machine which has release of 10.04.1 LTS Lucid. on this system i have apache, postgresql and django. for some app. development i have to install php and php-curl... due to being on network, i have exported wmvare machine to internet and firstly i have upgraded system and then install php5 packages on it. After all replacing it with its old place, i have considered that the new system query is some slow according to another. Old system query time : 140 ms New system query time : 9.11 s i have checked /etc/network interface and it seems there is no problem. i have checked /etc/resolv.conf and it seems ok i have checked /etc/nsswitch.conf and only host section is different from old one which old system has hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 and then i have checked time host -t A services.myapp.com and i got real 0m0.355s user 0m0.010s sys 0m0.020s and now what can i have to check for boosting my system as before?

    Read the article

  • Python service using Upstart on Ubuntu

    - by Soumya Simanta
    I want to create to deploy a heartbeat service (a python script) as a service using Upstart. My understanding is that I've to add a /etc/init/myheartbeatservice.conf with the following contents. # my heartbeat service description "Heartbeat monitor" start on startup stop on shutdown script exec /path/to/my/python/script.py end script My script starts another service process and the monitors the processes and sends heartbeat to an outside server regularly. Are startup and shutdown the correct events ? Also my script create a new thread. I'm assuming I also need to add fork daemon to my conf file? Thanks.

    Read the article

  • Unable to ping inside or outside network with default gateway 0.0.0.0

    - by agentroadkill
    I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

    Read the article

  • Ubuntu Installer offers to show differences, then doesn-t

    - by R B
    When I was installing updates under 12.04 LTS today, the ubuntu installer warned that there were differences between the local copy of smb.conf and that in the installer package. It offered me a drop/down list of options. I chose one which reads something like "show differences side by side" and clicked the only available button (other than help, I think it was labelled continue) The installer then proceeded with updates and asked for a reboot. Even after rebooting, no comparison was shown. How can I find out now whether I still have my previous smb.conf or the one from the installer, and what the differences are?

    Read the article

  • dovecot main process terminated with status 89

    - by G. He
    I'm trying to configure dovecot/imap to run without SSL. I set ssl = no in 10-ssl.conf in /etc/dovecot/conf.d. However, with this setting, dovecot dies right away when it is started. I checked the log file and found the following: dovecot main process (4895) terminated with status 89 What does it mean? Is there a way for dovecot to run without ssl? The reason I do NOT want ssl is that my outlook complains the certificate cannot be verified. It is really annoying. And I only run the server on a very small lan and don't need that extra security.

    Read the article

  • URL-rewriting on Plesk using ISAPI_rewrite3 Lite

    - by Anusha
    I am using Plesk Windows based web server with Windows 2008 server OS with IIS-6 for my e-commerce website. I want to rewrite URLs for all dynamic pages, So I installed ISAPI_Rewrite 3 Lite on my web server also I had uploaded the .htaccess file with the basic rules as follows RewriteEngine on RewriteRule ^contact\.html$ contactus.php? [NC,R] I never worked before with ISAPI neither on URL- rewriting. My doubt is How should I proceed after installation. Should I upload .htaccess or httpd.conf file OR This s/w has ISAPI_Rewrite Manager which gives place to edit httpd.conf, Should I write rules on this. Anyways I had tried all these steps but unfortunately I couldn't find any remedies. Any immediate solution will be appreciable.

    Read the article

  • Can't ping external websites

    - by Frantumn
    I can't ping google.com with my virtual ubuntu 12.04 server. I have set up a proxy URL in my /etc/apt/apt.conf file and it says Aquire::http::proxy http://urlname.com:9999; Now, I don't know a lot about how the proxy works, but I do know when we use it on windows VMachines it's a pac script that we place in internet explorer LAN settings and it automatically detects the script and gives internet access. I tried including the 9999/proxy.pac in the apt.conf URL and it didn't seem to work any better. Would ubuntu know how to handle a proxy.pac assuming it was created for windows? Should my URL include the .pac or just end after the port numbers? I've tried both without sucess, but I would like to know. A quick test to ping a fellow co-workers' PC was sucessful. So I can see network computers, but not google. or other internet sources.

    Read the article

  • Where is a postgresql 9.1 database stored in ubuntu 12.04?

    - by celenius
    I installed and created a Postgresql database on ubuntu. I then created the database using the following command: sudo su postgres createdb mydatabase However, I can't figure out where the database was initialized. I would like to be able to edit the hba.conf file and postgresl.conf files. When I view the database using pgadmin I see the following information: CREATE DATABASE mydatabase WITH OWNER = postgres ENCODING = 'UTF8' TABLESPACE = pg_default LC_COLLATE = 'en_US.UTF-8' LC_CTYPE = 'en_US.UTF-8' CONNECTION LIMIT = -1; Any thoughts on how I can find the database cluster location?

    Read the article

  • Restricting access to sites

    - by Paul
    I'm having some problems configuring my local proxy server so that it would restrict access to certain websites. The proxy server I'm using is Squid; I edited its configuration file found in /etc/squid/squid.conf to include the following: acl wikipedia dstdomain .wikipedia.org http_access deny wikipedia I tried to redirect elinks to use Squid. According to Squid's config file, it listens to port 3128, so in /etc/elinks/elinks.conf I added the following: set protocol.http.proxy.host = "localhost:3128" I also restarted Squid with sudo /etc/init.d/squid restart, but I can still access the banned websites using Elinks. What did I do wrong?

    Read the article

  • www.domain redirecting to google?

    - by aayush
    Note: A while back i had no place to host my domain, then via namecheap i set it to forward my domain to google I bought webhosting again today and everything was working fine. I set up vhosts and set up www.domain as the server alias. Both worked. Then i tried to set up a alternate subdomain test.domain, but failed (I did it by creating a alternate vhost right below the current one) as it kept redirecting to google. As a test, i replaced the www with test in serveralias, it still redirected to google but now even www redirects to google. I am using cloudflare, and i am really confused how to go about this. I tried listing www as a cname and as a A record, still redirecting to google. I tried checking via proxies e.t.c, its universal and hence not a problem of my PC. Please help, i am really distressed by this. I am running a ubuntu 13.10 x32 stack with LAMP. Here is what my domain.com.conf file looks like <VirtualHost *:80> # The ServerName directive sets the request scheme, hostname and port that # the server uses to identify itself. This is used when creating # redirection URLs. In the context of virtual hosts, the ServerName # specifies what hostname must appear in the request's Host: header to # match this virtual host. For the default virtual host (this file) this # value is not decisive as it is used as a last resort host regardless. # However, you must set it for any further virtual host explicitly. ServerName domain.com ServerAlias www.domain.com ServerAdmin webmaster@localhost DocumentRoot /var/www/domain.com/public_html # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the loglevel for particular # modules, e.g. #LogLevel info ssl:warn ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined # For most configuration files from conf-available/, which are # enabled or disabled at a global level, it is possible to # include a line for only one particular virtual host. For example the # following line enables the CGI configuration for this host only # after it has been globally disabled with "a2disconf". #Include conf-available/serve-cgi-bin.conf </VirtualHost> There is a valid index.php file at the end of the documentroot aswell. The website in question is aayushagra.com Edit: On cloudflare i tried removing the www entirely, and it still sent me to google Edit: Zone file ;; Domain: aayushagra.com ;; Exported: 2013-11-03 07:37:52 ;; ;; This file is intended for use for informational and archival ;; purposes ONLY and MUST be edited before use on a production ;; DNS server. In particular, you must: ;; -- update the SOA record with the correct authoritative name server ;; -- update the SOA record with the contact e-mail address information ;; -- update the NS record(s) with the authoritative name servers for this domain. ;; ;; For further information, please consult the BIND documentation ;; located on the following website: ;; ;; http://www.isc.org/ ;; ;; And RFC 1035: ;; ;; http://www.ietf.org/rfc/rfc1035.txt ;; ;; Please note that we do NOT offer technical support for any use ;; of this zone data, the BIND name server, or any other third-party ;; DNS software. ;; ;; Use at your own risk. ;; $ORIGIN aayushagra.com. @ 3600 IN SOA aayushagra.com. root.aayushagra.com. ( 2013110301 ; serial 7200 ; refresh 3600 ; retry 86400 ; expire 3600) ; minimum ;; MX Records aayushagra.com. 300 IN MX aayushagra.com. ;; CNAME Records direct.aayushagra.com. 300 IN CNAME aayushagra.com. ;; A Records (IPv4 addresses) www.aayushagra.com. 300 IN A 146.185.140.31 aayushagra.com. 300 IN A 146.185.140.31

    Read the article

  • haw to install libenca.so.0 in SUSE Linux (release 11Kernel linux 2.6.32.59-0.7-pae)gnome 2.28.2 [closed]

    - by Zeljko
    I haw problem with Mplayer. When I try to watch mouvie i got error code: /usr/bin/mplayer -noquiet -nofs -nomouseinput -vc coreserve, -sub-fuzziness 1 -identify -slave -vo xv, -ao alsa, -nokeepaspect -framedrop -dr -double -input conf=/usr/share/smplayer/input.conf -stop-xscreensaver -wid 31457623 -monitorpixelaspect 1 -ass -embeddedfonts -ass-line-spacing 0 -ass-font-scale 1 -ass-styles /home/adria/.config/smplayer/styles.ass -fontconfig -font Arial -subfont-autoscale 0 -subfont-osd-scale 20 -subfont-text-scale 20 -subcp ISO-8859-1 -subpos 100 -nocache -osdlevel 0 -vf-add eq2,hue -vf-add screenshot -slices -channels 2 -af equalizer=0:0:0:0:0:0:0:0:0:0 -softvol -softvol-max 110 /home/adria/Resident Evil - Retribution 2012 R5 DVDRiP XviD AC3 - BHRG/Resident Evil - Retribution 2012 R5 DVDRiP XviD AC3 - BHRG.avi /usr/bin/mplayer: error while loading shared libraries: libenca.so.0: cannot open shared object file: No such file or directory help please

    Read the article

  • At Symbol not working for apt get proxy authentication Ubuntu 11.10

    - by Shivhari
    I Have tried two things in three places to see if it works please do help me out. Two methords: 1) replacing @ with %40 2) replacing @ with \@ Three places: 1) export with the .bashrc file 2) editing /etc/apt/apt.conf and setting acquires there 3) using gconf editor and setting the values in /system/http_proxy and setting authentication name and password and checking the use_authentication checkbox. still there is no success and i still get 407 error when trying wget or apt-get update. please do help me, been stuck with this for three hours now. also, i read somewhere that creating a file in /etc/apt/apt.conf.d and then creating a 01proxy file with acquire might work. I tried that also, but it doesnt work. Please help.

    Read the article

  • Rsyslog problem after ubuntu upgrade 10.4 to 12.4

    - by Oxymoron
    I was using Ubuntu 10.4 until last week for storing the log informations of a external device with rsyslog. After upgrading to ubuntu 12.4 the logging of TCP doesn't works anymore. (There are just no pakets visible - not even with tcpdump - aold ubuntu machine still sees the pakets.) UDP works with the identical configuration on the ubuntu machine and a "use UDP" on the external device. Are there any changes in rsyslog, that could explain this? My rsyslog.conf file looks like this (with more comments): $ModLoad imuxsock # provides support for local system logging $ModLoad imklog # provides kernel logging support (previously done by rklogd) #$ModLoad immark # provides --MARK-- message capability $KLogPath /proc/kmsg # provides UDP syslog reception $ModLoad imudp $UDPServerRun 514 # provides TCP syslog reception $ModLoad imtcp $InputTCPServerRun 514 ########################### #### GLOBAL DIRECTIVES #### ########################### $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat # Set the default permissions for all log files. # $FileOwner syslog $FileGroup adm $FileCreateMode 0640 $DirCreateMode 0755 $Umask 0022 $PrivDropToUser syslog $PrivDropToGroup syslog if $fromhost-ip startswith '192.168.0.10' then /var/log/caliDevice.log & ~ # local/regular rules, like '.' /var/log/syslog.log $IncludeConfig /etc/rsyslog.d/*.conf

    Read the article

  • Linux/Apache performance very slow even on local network

    - by klausch
    I have an Ubuntu server machine running Apache and MYSQL. System and version info is as follows: Linux kernel 3.0.0.-12 Apache/2.2.20 MySQL Ver 14.14.Distrib 5.1.58 I am running a few websites on this server, some HTML only, some PHP/MySQL. THe [problem is that response time is very slow, both on static as well as the dynamic sites. Sometimes it takes more than 10 seconds before a response is given, this makes the sites very slow and almost unusable. The problem occurs even when requesting from the local network. I have added the involved subdomains to my /etc/hosts file, and abolve all the problem is not solved by using IP numbers instead of URL's. So there is no DNS lookup issue. I have modified the log format by showing the response times and sometimes a files takes 12 seconds to be served, see the jquery~.js file in the example screenshot. I have no explanation for this extremely long response time, but is is not even the only issue here, some other files takes a long time to be served too, but do not show a long response time in the log file. So probably different tissues are involved here. I cannot find a solution until now, any suggestions??? THanx in advance, Klaas link to screenshot picture from access logfile Some extra configuration info: apache2.conf (comment is removed) LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType text/plain HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn Include mods-enabled/*.load Include mods-enabled/*.conf Include httpd.conf Include ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\" %T/%D" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include conf.d/ Include sites-enabled/ And the virtual hostfile for one of the slow sites, in fact it is pretty straightforward... <VirtualHost *:80> ServerAdmin [email protected] ServerSignature EMail ServerName toenjoy.drsklaus.nl DocumentRoot /var/www/toenjoy.drsklaus.nl <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/toenjoy.drsklaus.nl/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig AuthType Basic AuthName "To Enjoy" AuthUserFile /etc/.htpasswd Require user petraaa Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> And the output of free -m: klaas@ubuntu-server:/etc/apache2$ free -m total used free shared buffers cached Mem: 1997 1401 595 0 144 1017 -/+ buffers/cache: 238 1758 Swap: 2035 0 2035 and I have no indication that swapping occurs on the moments the site is slow. I have runned top and it does not appear to be a CPU issue. I have the impression that the spawning of a apache thread could maybe be the bottleneck but it is just a suggestion. Maybe this gives some extra information! EDIT: The problem seemed to be gone for some time but occurs again! And not only with Apache, also connecting using SSH takes a tremendous time, sometimes it takes up to 15 seconds before the keyphrase is asked for. Also scp works very slowly. The behavious is really unpredoctable and makes the server very hard to use. Any ideas...?

    Read the article

  • Ubuntu not booting properly

    - by user86998
    I just bought an Asus EeePC with Ubuntu 12.04 installed on it. After turning it on and performing the updates it didn't boot properly and showed a screen saying it was working on low graphics mode, but I wasn't able to get to the GUI. After some searching, I tried renaming xorg.conf.failsafe to xorg.conf using the mv command. After rebooting I got to the Ubuntu GUI but it was stuck to a 800x600 resolution, track pad not working and not detecting my Wi-Fi. After rebooting again it goes straight to console tty1. I'm completely new to Ubuntu and Linux. If some one can give help? I think the best would probably be to reinstall it from scratch, but I don't know how.

    Read the article

  • I can't login to facebook from any browser

    - by user92974
    I'm Using UBUNTU 12.04. I'm having problems with Facebook. It really hard to login. Takes like 3 or 5 min. At first I thought it was a flash problem but then I realized it could be some proxy's conf file. Other sites doesn't have problems. Yesterday I tried Tor-browser-bundle and I installed privoxy using this rules http://www.neilvandyke.org/privoxy-rules/ . Today I removed privoxy and the conf file with the Ubuntu software center and ubuntu-tweak. I don't really find the problem and my windows pc does not have any problem with the same modem. I don't have an ISP'S PROXY it just a direct Internet connection using automatic DHCP. Maybe I am missing something else. But I want to be sure so, I'm asking. PD: Sorry for my English I'm Argentinian.

    Read the article

  • Unable to start GUI app from upstart

    - by novice
    As part of post-start of my app say "mydaemon" i want to launch a gui app say "mygui" I am unable to do this. I have verified user perm using xhost, DISPLAY variable is set correctly. conf file in /etc/init/ is given below me@ubuntu:~/term$ cat /etc/init/agentd.conf description "my daemon" author "me" start on runlevel [2345] stop on runlevel [016] console output kill timeout 60 respawn respawn limit 3 15 Allow some clean up time post-stop script env DISPLAY=:0.0 cd /home/me ./mygui sleep 1 end script script cd /home/me ./myapp end script post-start script env DISPLAY=:0.0 cd /home/me ./mygui end script sdn@ubuntu:~/term$ any suggestions?

    Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >