Search Results

Search found 1864 results on 75 pages for 'optional'.

Page 51/75 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Unit Testing Framework for XQuery

  - by Knut Vatsendvik

  This posting provides a unit testing framework for XQuery using Oracle Service Bus. It allows you to write a test case to run your XQuery transformations in an automated fashion. When the test case is run, the framework returns any differences found in the response. The complete code sample with install instructions can be downloaded from here. Writing a Unit Test You start a new Test Case by creating a Proxy Service from Workshop that comes with Oracle Service Bus. In the General Configuration page select Service Type to be Messaging Service           In the Message Type Configuration page link both the Request & Response Message Type to the TestCase element of the UnitTest.xsd schema                 The TestCase element consists of the following child elements The ID and optional Name element is simply used for reference. The Transformation element is the XQuery resource to be executed. The Input elements represents the input to run the XQuery with. The Output element represents the expected output. These XML documents are “also” represented as an XQuery resource where the XQuery function takes no arguments and returns the XML document. Why not pass the test data with the TestCase? Passing an XML structure in another XML structure is not very easy or at least not very human readable. Therefore it was chosen to represent the test data as an loadable resource in the OSB. However you are free to go ahead with another approach on this if wanted. The XMLDiff elements represents any differences found. A sample on input is shown here. Modeling the Message Flow Then the next step is to model the message flow of the Proxy Service. In the Request Pipeline create a stage node that loads the test case input data.      For this, specify a dynamic XQuery expression that evaluates at runtime to the name of a pre-registered XQuery resource. The expression is of course set by the input data from the test case.           Add a Run stage node. Assign the result of the XQuery, that is to be run, to a context variable. Define a mapping for each of the input variables added in previous stage.     Add a Compare stage. Like with the input data, load the expected output data. Do a compare using XMLDiff XQuery provided where the first argument is the loaded output test data, and the second argument the result from the Run stage. Any differences found is replaced back into the test case XMLDiff element. In case of any unexpected failure while processing, add an Error Handler to the Pipeline to capture the fault. To pass back the result add the following Insert action In the Response Pipeline. A sample on output is shown here.

  Read the article

• Subterranean IL: Custom modifiers

  - by Simon Cooper

  In IL, volatile is an instruction prefix used to set a memory barrier at that instruction. However, in C#, volatile is applied to a field to indicate that all accesses on that field should be prefixed with volatile. As I mentioned in my previous post, this means that the field definition needs to store this information somehow, as such a field could be accessed from another assembly. However, IL does not have a concept of a 'volatile field'. How is this information stored? Attributes The standard way of solving this is to apply a VolatileAttribute or similar to the field; this extra metadata notifies the C# compiler that all loads and stores to that field should use the volatile prefix. However, there is a problem with this approach, namely, the .NET C++ compiler. C++ allows methods to be overloaded using properties, like volatile or const, on the parameters; this is perfectly legal C++: public ref class VolatileMethods { void Method(int *i) {} void Method(volatile int *i) {} } If volatile was specified using a custom attribute, then the VolatileMethods class wouldn't be compilable to IL, as there is nothing to differentiate the two methods from each other. This is where custom modifiers come in. Custom modifiers Custom modifiers are similar to custom attributes, but instead of being applied to an IL element separately to its declaration, they are embedded within the field or parameter's type signature itself. The VolatileMethods class would be compiled to the following IL: .class public VolatileMethods { .method public instance void Method(int32* i) {} .method public instance void Method( int32 modreq( [mscorlib]System.Runtime.CompilerServices.IsVolatile)* i) {} } The modreq([mscorlib]System.Runtime.CompilerServices.IsVolatile) is the custom modifier. This adds a TypeDef or TypeRef token to the signature of the field or parameter, and even though they are mostly ignored by the CLR when it's executing the program, this allows methods and fields to be overloaded in ways that wouldn't be allowed using attributes. Because the modifiers are part of the signature, they need to be fully specified when calling such a method in IL: call instance void Method( int32 modreq([mscorlib]System.Runtime.CompilerServices.IsVolatile)*) There are two ways of applying modifiers; modreq specifies required modifiers (like IsVolatile), and modopt specifies optional modifiers that can be ignored by compilers (like IsLong or IsConst). The type specified as the modifier argument are simple placeholders; if you have a look at the definitions of IsVolatile and IsLong they are completely empty. They exist solely to be referenced by a modifier. Custom modifiers are used extensively by the C++ compiler to specify concepts that aren't expressible in IL, but still need to be taken into account when calling method overloads. C++ and C# That's all very well and good, but how does this affect C#? Well, the C++ compiler uses modreq(IsVolatile) to specify volatility on both method parameters and fields, as it would be slightly odd to have the same concept represented using a modifier or attribute depending on what it was applied to. Once you've compiled your C++ project, it can then be referenced and used from C#, so the C# compiler has to recognise the modreq(IsVolatile) custom modifier applied to fields, and vice versa. So, even though you can't overload fields or parameters with volatile using C#, volatile needs to be expressed using a custom modifier rather than an attribute to guarentee correct interoperability and behaviour with any C++ dlls that happen to come along. Next up: a closer look at attributes, and how certain attributes compile in unexpected ways.

  Read the article

• Improvements to Joshua Bloch's Builder Design Pattern?

  - by Jason Fotinatos

  Back in 2007, I read an article about Joshua Blochs take on the "builder pattern" and how it could be modified to improve the overuse of constructors and setters, especially when an object has a large number of properties, most of which are optional. A brief summary of this design pattern is articled here [http://rwhansen.blogspot.com/2007/07/theres-builder-pattern-that-joshua.html]. I liked the idea, and have been using it since. The problem with it, while it is very clean and nice to use from the client perspective, implementing it can be a pain in the bum! There are so many different places in the object where a single property is reference, and thus creating the object, and adding a new property takes a lot of time. So...I had an idea. First, an example object in Joshua Bloch's style: Josh Bloch Style: public class OptionsJoshBlochStyle { private final String option1; private final int option2; // ...other options here <<<< public String getOption1() { return option1; } public int getOption2() { return option2; } public static class Builder { private String option1; private int option2; // other options here <<<<< public Builder option1(String option1) { this.option1 = option1; return this; } public Builder option2(int option2) { this.option2 = option2; return this; } public OptionsJoshBlochStyle build() { return new OptionsJoshBlochStyle(this); } } private OptionsJoshBlochStyle(Builder builder) { this.option1 = builder.option1; this.option2 = builder.option2; // other options here <<<<<< } public static void main(String[] args) { OptionsJoshBlochStyle optionsVariation1 = new OptionsJoshBlochStyle.Builder().option1("firefox").option2(1).build(); OptionsJoshBlochStyle optionsVariation2 = new OptionsJoshBlochStyle.Builder().option1("chrome").option2(2).build(); } } Now my "improved" version: public class Options { // note that these are not final private String option1; private int option2; // ...other options here public String getOption1() { return option1; } public int getOption2() { return option2; } public static class Builder { private final Options options = new Options(); public Builder option1(String option1) { this.options.option1 = option1; return this; } public Builder option2(int option2) { this.options.option2 = option2; return this; } public Options build() { return options; } } private Options() { } public static void main(String[] args) { Options optionsVariation1 = new Options.Builder().option1("firefox").option2(1).build(); Options optionsVariation2 = new Options.Builder().option1("chrome").option2(2).build(); } } As you can see in my "improved version", there are 2 less places in which we need to add code about any addition properties (or options, in this case)! The only negative that I can see is that the instance variables of the outer class are not able to be final. But, the class is still immutable without this. Is there really any downside to this improvement in maintainability? There has to be a reason which he repeated the properties within the nested class that I'm not seeing?

  Read the article

• [Silverlight] How to watermark a WriteableBitmap with a text

  - by Benjamin Roux

  Hello, In my current project, I needed to watermark a WriteableBitmap with a text. As I couldn’t find anything I decided to create a small extension method to do so. public static class WriteableBitmapEx { /// <summary> /// Creates a watermark on the specified image /// </summary> /// <param name="input">The image to create the watermark from</param> /// <param name="watermark">The text to watermark</param> /// <param name="color">The color - default is White</param> /// <param name="fontSize">The font size - default is 50</param> /// <param name="opacity">The opacity - default is 0.25</param> /// <param name="hasDropShadow">Specifies if a drop shadow effect must be added - default is true</param> /// <returns>The watermarked image</returns> public static WriteableBitmap Watermark(this WriteableBitmap input, string watermark, Color color = default(Color), double fontSize = 50, double opacity = 0.25, bool hasDropShadow = true) { var watermarked = GetTextBitmap(watermark, fontSize, color == default(Color) ? Colors.White : color, opacity, hasDropShadow); var width = watermarked.PixelWidth; var height = watermarked.PixelHeight; var result = input.Clone(); var position = new Rect(input.PixelWidth - width - 20 /* right margin */, input.PixelHeight - height, width, height); result.Blit(position, watermarked, new Rect(0, 0, width, height)); return result; } /// <summary> /// Creates a WriteableBitmap from a text /// </summary> /// <param name="text"></param> /// <param name="fontSize"></param> /// <param name="color"></param> /// <param name="opacity"></param> /// <param name="hasDropShadow"></param> /// <returns></returns> private static WriteableBitmap GetTextBitmap(string text, double fontSize, Color color, double opacity, bool hasDropShadow) { TextBlock txt = new TextBlock(); txt.Text = text; txt.FontSize = fontSize; txt.Foreground = new SolidColorBrush(color); txt.Opacity = opacity; if (hasDropShadow) txt.Effect = new DropShadowEffect(); WriteableBitmap bitmap = new WriteableBitmap((int)txt.ActualWidth, (int)txt.ActualHeight); bitmap.Render(txt, null); bitmap.Invalidate(); return bitmap; } } For this code to run, you need the WritableBitmapEx library. As you can see, it’s quite simple. You just need to call the Watermark method and pass it the text you want to add in your image. You can also pass optional parameters like the color, the opacity, the fontsize or if you want a drop shadow effect. I could have specify other parameters like the position or the the font family but you can change the code if you need to. Here’s what it can give Hope this helps.

  Read the article

• SQL SERVER – What are Actions in SSAS and How to Make a Reporting Action

  - by Pinal Dave

  Actions are used for customized browsing and drilling of data for the end-user. It’s an event that a user can raise while accessing the cube data. They are used in cube browsers like excel and are triggered when a user in a client tool clicks on a particular member, level, dimension, cells or may be the cube itself.  For example a user might be able to see a reporting services report, open a web page or drill through to detailed information related to the cube data. Analysis server supports 3 types of actions :- Report Drill-through Standard Actions In this blog post, I will explain the Reporting  action. The objective of this action is to return a report with details of the product where the sales amount is greater than 1000 in cube browser analysis. You need to create a basic cube first with the facts and dimensions you want in the analysis. Following are the steps to create reporting action. Go to SQL server data tools and open the analysis services project. Navigate to actions and click on new reporting action. 2.) Specify the name of the action and choose target type as attribute members since we have to create the action on members for a attribute. 3.) Specify the Target object of your report action. Target object would be the dimension or attribute on which you want the report to appear. In our case it is product name. 4.) Next you have to define the condition on which you want the report link to appear. However, this is an optional feature. In this example we are specifying a condition, which will check if the sales amount is greater than 10,000. So, that the link appears only for those products where the defined condition is met. 5.) Next you have to specify the server name on which the report is present, report path  and the report format in which you want the report to appear. 6.) Additionally you can specify the parameters. As with conditional expression, the parameters should be a valid MDX expression. The parameter name should be same as the one defined in the report. 7.) Deploy your solution after you are done with specifying parameters and go to the cube browser. 8.) Click on the analyze in excel button, this will open your cube in excel 9.) Make an analysis which shows product names and their sales amount. 10.) Right click on a product where sales amount is greater than 10000 you will see the reporting action link. Click on that and you will be taken to your reporting services report. 11.) Clicking on the link will take you to the URL of the report. I created this report using report project wizard in SQL server data tools. So, this is how we can launch reports from a cube browser. Similarly you can open web pages, run applications and a number of  other tasks. Koenig Solutions offers SSAS training which contains all Analysis Services including Reporting in great detail. In my next blog post I will talk about drill-through actions. Author: Namita Sharma, Senior Corporate Trainer at Koenig Solutions. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSAS

  Read the article

• MPI Cluster Debugger launch integration in VS2010

  Let's assume that you have all the HPC bits installed and that you have existing MPI code (or you created a "Hello World" project using the MPI project template). Of course, you create a single MPI application and at runtime it will correspond to multiple processes (of the same app) launched on multiple nodes (i.e. machines) on the cluster. So how do you debug such a situation by simply hitting the familiar "F5" keystroke (i.e. Debug - Start Debugging)?WATCH IT INSTEAD OF READING ABOUT ITIf you can't bear to read through all the details below, just watch this 19-minute screencast explaining this VS2010 feature. Alternatively, or even additionally, keep on reading.REQUIREMENTWhen you debug an MPI application, you would want the copying of resources from your client machine (where Visual Studio is installed) to each compute node (where Windows HPC Server is installed) to take place automatically for you. 'Resources' in the previous sentence includes your application binary, plus any binary or data dependencies it may have, plus PDBs if needed, plus the debug CRT of the correct bitness, plus msvsmon for remote debugging to work. You would also want, after copying is complete, to have your app and msvsmon launched and attached so that you can hit breakpoints back in Visual Studio on your client machine. All these thing that you would want are delivered in VS2010.STEPS TO F51. In your MPI project where you have placed a breakpoint go to Project Properties - Configuration Properties - Debugging. Ensure the "Debugger to launch" combo box value is set to MPI Cluster Debugger.2. There are a whole bunch of properties here and typically you can ignore all of them except one: Run Environment. By default it is set to run 1 process on your local machine and if you change the number after that to, for example, 4 it will launch 4 processes of your app on your local machine.You want this to run on your cluster though, so go to the dropdown arrow at the end of the Run Environment cell and open it to expose the "Edit Hpc node" menu which opens the Node Selector dialog:In this dialog you can enter (or pick from a list) the cluster head node name and then the number of processes you want to execute on the cluster and then hit OK and… you are done.3. Press F5 and watch your breakpoint get hit (after giving it some time for copying, remote execution, attachment and symbol resolution to take place).GOING DEEPERIn the MPI Cluster Debugger project properties above, you can see many additional properties to the Run Environment. They are all optional, but you may want to understand them in order to fine tune your cluster debugging. Read all about each one of these on the MSDN page Configuration Properties for the MPI Cluster Debugger.In the Node Selector dialog above you can see more options than just the Head Node name and Number of Process to run. They should be self-explanatory but I also cover them in depth in my screencast showing you an example of why you would choose to schedule processes per core versus per node. You can also read about these options on MSDN as part of the page How to: Configure and Launch the MPI Cluster Debugger.To read through an example that touches on MPI project creation, project properties, node selector, and also usage of MPI with OpenMP plus MPI with PPL, read the MSDN page Walkthrough: Launching the MPI Cluster Debugger in Visual Studio 2010.Happy MPI debugging! Comments about this post welcome at the original blog.

  Read the article

• Isis Finally Rolls Out

  - by David Dorf

  Google has rolled their wallet out for several chains; I see the NFC readers in Walgreen's when I'm sent their for milk.  But Isis has been relatively quiet until now.  As of last week they have finally launched in their two test cities: Austin, and Salt Lake City.  Below are the supported carriers and phones as of now, but more phones will be added later. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} AT&T supports: HTC One™ X, LG Escape™, Samsung Galaxy Exhilarate™, Samsung Galaxy S® III, Samsung Galaxy Rugby Pro™ T-Mobile supports: Samsung Galaxy S® II, Samsung Galaxy S® III, Samsung Galaxy S® Relay 4G Verizon supports: Droid Incredible 4G LTE. Of course iPhone owners have no wallet since Apple didn't included an NFC chip. To start using Isis, you have to take your NFC-capable phone to your carrier's store to get the SIM replaced with a more sophisticated one that has a secure element configured for Isis.  The "secure element" is the cryptographic logic that secures mobile payments.  Carriers like the secure element in the SIM while non-carriers (like Google) prefer the secure element in the phone's electronics. (I'm not entirely sure if you could support both Isis and Google Wallet on the same phone.  Anybody know?) Then you can download the Isis app from Google Play and load your cards.  Most credit cards are supported, and there's a process to verify the credit cards are valid.  Then you can select from the list of participating retailers to "follow."  Selecting a retailer allows that retailer to give you offers via the app. The app is well done and easy to use.  You can select a default payment type and also switch between them easily.  When the phone is tapped on the reader, there are two exchanges of information.  The payment information is transferred, and then the Isis "SmartTap" information which includes optional loyalty number and digital coupons.  Of course the value of mobile wallets comes from the ease of handling all three data types (i.e. payment, loyalty, offers). There are several advertisements for Isis running now, and my favorite is below.

  Read the article

• Oracle Solaris Crash Analysis Tool 5.3 now available

  - by user12609056

  Oracle Solaris Crash Analysis Tool 5.3 The Oracle Solaris Crash Analysis Tool Team is happy to announce the availability of release 5.3.  This release addresses bugs discovered since the release of 5.2 plus enhancements to support Oracle Solaris 11 and updates to Oracle Solaris versions 7 through 10. The packages are available on My Oracle Support - simply search for Patch 13365310 to find the downloadable packages. Release Notes General blast support The blast GUI has been removed and is no longer supported. Oracle Solaris 2.6 Support As of Oracle Solaris Crash Analysis Tool 5.3, support for Oracle Solaris 2.6 has been dropped. If you have systems running Solaris 2.6, you will need to use Oracle Solaris Crash Analysis Tool 5.2 or earlier to read its crash dumps. New Commands Sanity Command Though one can re-run the sanity checks that are run at tool start-up using the coreinfo command, many users were unaware that they were. Though these checks can still be run using that command, a new command, namely sanity, can now be used to re-run the checks at any time. Interface Changes scat_explore -r and -t option The -r option has ben added to scat_explore so that a base directory can be specified and the -t op[tion was added to enable color taggging of the output. The scat_explore sub-command now accepts new options. Usage is: scat --scat_explore [-atv] [-r base_dir] [-d dest] [unix.N] [vmcore.]N Where: -v Verbose Mode: The command will print messages highlighting what it's doing. -a Auto Mode: The command does not prompt for input from the user as it runs. -d dest Instructs scat_explore to save it's output in the directory dest instead of the present working directory. -r base_dir Instructs scat_explore to save it's under the directory base_dir instead of the present working directory. If it is not specified using the -d option, scat_explore names it's output file as "scat_explore_system_name_hostid_lbolt_value_corefile_name." -t Enable color tags. When enabled, scat_explore tags important text with colors that match the level of importance. These colors correspond to the color normally printed when running Oracle Solaris Crash Analysis Tool in interactive mode. Tag Name Definition FATAL An extremely important message which should be investigated. WARNING A warning that may or may not have anything to do with the crash. ERROR An error, usually printer with a suggested command ALERT Used to indicate something the tool discovered. INFO Purely informational message INFO2 A follow-up to an INFO tagged message REDZONE Usually used when prnting memory info showing something is in the kernel's REDZONE. N The number of the crash dump. Specifying unix.N vmcore.N is optional and not required. Example: $ scat --scat_explore -a -v -r /tmp vmcore.0 #Output directory: /tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 #Tar filename: scat_explore_oomph_833a2959_0x28800_vmcore.0.tar #Extracting crash data... #Gathering standard crash data collections... #Panic string indicates a possible hang... #Gathering Hang Related data... #Creating tar file... #Compressing tar file... #Successful extraction SCAT_EXPLORE_DATA_DIR=/tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 Sending scat_explore results The .tar.gz file that results from a scat_explore run may be sent using Oracle Secure File Transfer. The Oracle Secure File Transfer User Guide describes how to use it to send a file. The send_scat_explore script now has a -t option for specifying a to address for sending the results. This option is mandatory. Known Issues There are a couple known issues that we are addressing in release 5.4, which you should expect to see soon: Display of timestamps in threads and clock information is incorrect in some cases. There are alignment issues with some of the tables produced by the tool.

  Read the article

• How to translate along Z axis in OpenTK

  - by JeremyJAlpha

  I am playing around with an OpenGL sample application I downloaded for Xamarin-Android. The sample application produces a rotating colored cube I would simply like to edit it so that the rotating cube is translated along the Z axis and disappears into the distance. I modified the code by: adding an cumulative variable to store my Z distance, adding GL.Enable(All.DepthBufferBit) - unsure if I put it in the right place, adding GL.Translate(0.0f, 0.0f, Depth) - before the rotate functions, Result: cube rotates a couple of times then disappears, it seems to be getting clipped out of the frustum. So my question is what is the correct way to use and initialize the Z buffer and get the cube to travel along the Z axis? I am sure I am missing some function calls but am unsure of what they are and where to put them. I apologise in advance as this is very basic stuff but am still learning :P, I would appreciate it if anyone could show me the best way to get the cube to still rotate but to also move along the Z axis. I have commented all my modifications in the code: // This gets called when the drawing surface is ready protected override void OnLoad (EventArgs e) { // this call is optional, and meant to raise delegates // in case any are registered base.OnLoad (e); // UpdateFrame and RenderFrame are called // by the render loop. This is takes effect // when we use 'Run ()', like below UpdateFrame += delegate (object sender, FrameEventArgs args) { // Rotate at a constant speed for (int i = 0; i < 3; i ++) rot [i] += (float) (rateOfRotationPS [i] * args.Time); }; RenderFrame += delegate { RenderCube (); }; GL.Enable(All.DepthBufferBit); //Added by Noob GL.Enable(All.CullFace); GL.ShadeModel(All.Smooth); GL.Hint(All.PerspectiveCorrectionHint, All.Nicest); // Run the render loop Run (30); } void RenderCube () { GL.Viewport(0, 0, viewportWidth, viewportHeight); GL.MatrixMode (All.Projection); GL.LoadIdentity (); if ( viewportWidth > viewportHeight ) { GL.Ortho(-1.5f, 1.5f, 1.0f, -1.0f, -1.0f, 1.0f); } else { GL.Ortho(-1.0f, 1.0f, -1.5f, 1.5f, -1.0f, 1.0f); } GL.MatrixMode (All.Modelview); GL.LoadIdentity (); Depth -= 0.02f; //Added by Noob GL.Translate(0.0f,0.0f,Depth); //Added by Noob GL.Rotate (rot[0], 1.0f, 0.0f, 0.0f); GL.Rotate (rot[1], 0.0f, 1.0f, 0.0f); GL.Rotate (rot[2], 0.0f, 1.0f, 0.0f); GL.ClearColor (0, 0, 0, 1.0f); GL.Clear (ClearBufferMask.ColorBufferBit); GL.VertexPointer(3, All.Float, 0, cube); GL.EnableClientState (All.VertexArray); GL.ColorPointer (4, All.Float, 0, cubeColors); GL.EnableClientState (All.ColorArray); GL.DrawElements(All.Triangles, 36, All.UnsignedByte, triangles); SwapBuffers (); }

  Read the article

• Synchronous Actions

  - by Dan Krasinski-Oracle

  Since the introduction of SMF, svcadm(1M) has had the ability to enable or disable a service instance and wait for that service instance to reach a final state.  With Oracle Solaris 11.2, we’ve expanded the set of administrative actions which can be invoked synchronously. Now all subcommands of svcadm(1M) have synchronous behavior. Let’s take a look at the new usage: Usage: svcadm [-v] [cmd [args ... ]] svcadm enable [-rt] [-s [-T timeout]] <service> ... enable and online service(s) svcadm disable [-t] [-s [-T timeout]] <service> ... disable and offline service(s) svcadm restart [-s [-T timeout]] <service> ... restart specified service(s) svcadm refresh [-s [-T timeout]] <service> ... re-read service configuration svcadm mark [-It] [-s [-T timeout]] <state> <service> ... set maintenance state svcadm clear [-s [-T timeout]] <service> ... clear maintenance state svcadm milestone [-d] [-s [-T timeout]] <milestone> advance to a service milestone svcadm delegate [-s] <restarter> <svc> ... delegate service to a restarter As you can see, each subcommand now has a ‘-s’ flag. That flag tells svcadm(1M) to wait for the subcommand to complete before returning. For enables, that means waiting until the instance is either ‘online’ or in the ‘maintenance’ state. For disable, the instance must reach the ‘disabled’ state. Other subcommands complete when: restart A restart is considered complete once the instance has gone offline after running the ‘stop’ method, and then has either returned to the ‘online’ state or has entered the ‘maintenance’ state. refresh If an instance is in the ‘online’ state, a refresh is considered complete once the ‘refresh’ method for the instance has finished. mark maintenance Marking an instance for maintenance completes when the instance has reached the ‘maintenance’ state. mark degraded Marking an instance as degraded completes when the instance has reached the ‘degraded’ state from the ‘online’ state. milestone A milestone transition can occur in one of two directions. Either the transition moves from a lower milestone to a higher one, or from a higher one to a lower one. When moving to a higher milestone, the transition is considered complete when the instance representing that milestone reaches the ‘online’ state. The transition to a lower milestone, on the other hand, completes only when all instances which are part of higher milestones have reached the ‘disabled’ state. That’s not the whole story. svcadm(1M) will also try to determine if the actions initiated by a particular subcommand cannot complete. Trying to enable an instance which does not have its dependencies satisfied, for example, will cause svcadm(1M) to terminate before that instance reaches the ‘online’ state. You’ll also notice the optional ‘-T’ flag which can be used in conjunction with the ‘-s’ flag. This flag sets a timeout, in seconds, after which svcadm gives up on waiting for the subcommand to complete and terminates. This is useful in many cases, but in particular when the start method for an instance has an infinite timeout but might get stuck waiting for some resource that may never become available. For the C-oriented, each of these administrative actions has a corresponding function in libscf(3SCF), with names like smf_enable_instance_synchronous(3SCF) and smf_restart_instance_synchronous(3SCF).  Take a look at smf_enable_instance_synchronous(3SCF) for details.

  Read the article

• Where Have All the Ugly Forms Gone? Users and ADF Took Care Of It

  - by ultan o'broin

  Sometimes I hear that our application demos are a bit too "cutsey" and that we never talk about with any user roles that have lots of data entry as a requirement. Some (no names) consider those old clunker forms, with the myriad rows of fields, to be super-productive for data clerks. We do have such roles covered in Oracle Fusion Applications for sure. But consider what is really the issue here: productivity. Check out how the Oracle Fusion Financials Applications User Experience team went about designing for productivity when receiving and entering invoice data, for example. See how Fusion Financials caters so well for input and control of data? Central to all this is knowing the users and how they work: what tasks do they need to perform, and when. Read more about Fusion Financials productivity in the white paper, Get It Done Fast, Get It Done Right: The Oracle Fusion Financials User Experience. Now and then, I see forms that weren't designed for end user activity at all. Instead, they were designed by developers or by the IT department around the database schema. Forms with literally dozens of fields on the same page, sometimes. Forms that give the impression there was only task involved, when there may have been several. At times, completing one of these huge forms accurately became so tedious that, under pressure, it made more sense for the user to complete it quickly as possible and then let somebody else check it for accuracy and fill in the gaps from data emailed along in spreadsheet form. Data accuracy is critical in our business. Not good. Not efficient. Not productive. So here are a few basics on forms design for data entry-type user roles. A great place for developers to start exploring what is possible with forms layout is the Rich Client User Experience (RCUX) guidance on Form Layout, using ADF components. User-Centered Forms Design Considerations The starting point--something you must always keep in mind with your own design--is design for the end user. Find a representative end user, and keep that user engaged throughout the design, deployment, and test process. Consider these points in user testing those forms: Are there automated or technical solutions to entering the data that avoid manual input in the first place? For example, imports, uploads, OCR, whatever. Some day we will be able to tell Siri to do it, but leave that for now. Design your form to reflect the task involved (i.e., the business process) and not the database schema. On the form, group like fields together, logically. Eliminate duplicate data entry or prepopulate from previous data entry. Allow users to complete fields in the order they wish (i.e., no interdependency). Allow for tabbing between fields (keyboard is faster than mouse), so know how the browser supports this (see that RCUX guideline). Allow for final validation at the page level not at field-level entry. Way better for heads-down users. For example, ADF messages allow you to see a list of all validation errors on a page on a final submit or navigation action and to easily navigate to the point of error. Better still, be error tolerant. Allow users to enter data in formats they comfortable with. Bind any relevant user preference setting to the input format allowed (for example, the locale date format). Explore what data entry conversion can do for you automatically too (see the ADF converter demos, convenience patterns can also be written). Only ask for data input when it's needed. Get rid of, or hide optional fields. Cut down on the number of mandatory fields, and mark them clearly (use a *). Clearly label the fields in plain language. I am sure you may have a few more tips on forms design for data entry users. Remember the user before finding the comments.

  Read the article

• Migrating a WebLogic Domain from a 32 to a 64 bit JVM/Architecture

  - by adejuanc

  Currently on 32 bit OS which presents a physical constraint when trying to allocate memory. By limit, a 32 bit OS, will not be able to allocate more than 3 GB on a Linux environment, or 2 GB for Windows environment (not considering Physical Address Extension (PAE) implementation, which can increase the maximum allocatable memory). When this limit is reached, a migration to a 64 bit architecture is recommended. Below are the steps on how to install a 64 WebLogic Server version, along with a 64 Bit JVM and then how to migrate the domain to this new environment. Weblogic Server Version: WebLogic Server Version: 10.3.4.0 OS: Linux adejuan-cl.cl.oracle.com 2.6.18-194.el5 #1 SMP Mon Jan 01 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux JVM:java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Oracle JRockit(R) (build R28.1.1-13-139783-1.6.0_22-20101206-0136-linux-x86_64, compiled mode) To create migration template: 1. Execute $<WLS_HOME>/wlserver_10.3/common/bin/config_builder.sh 2. Create Domain Template. 3. Select Domain to migrate. 4. Enter the name of template and other info. Click next. 5. Using Add Button, Select libraries you want to add under lib folder. copy jdbc data sources you would like to have under config/jdbc folder. If you want to have log4j configuration, copy log4j.xml under domain_root folder. 6. Select data base for the domain and click next. 7. Enter Admin Server Name and port numbers. Click next. 8. Enter username and password. Click next. Select No if you don want to add users/groups/roles 9. Click next until reach button create. This will create a jar file that is needed for the next action plan. To install and migrate domain to 64 bit architecture. 1. Install JVM Jrockit R28.1.1.13 on environment. (uncompress zip folder on a known location) 2. Go to JRockit_Home/bin and execute $ java -d64 -jar wls1034_generic.jar 3. When prompt, select JRockit JVM in browse menu, and wait for installation to finish. 4. Go to <WLS_HOME>/wlserver_10.3/common/bin and execute $ ./config.sh 5. Select Create a new Weblogic domain 6. Select Base this domain on an existing template and select browse. 7. Select jar file created on previous action plan. 8. Select Name of domain. Maintain in most cases. 9. Select user name and password. Maintain in most cases. 10. Select Jrockit SDK 1.6.0_22 and click next. 11. Confirm all JMS/JDBC/security configuration. 12. On select Optional Configuration, reconfigure if necessary. 13. Check on Configuration summary for all domain configuration. 14. Click on create, to finish up domain import. Note: Always when installing a 64 bit WLS, it's necessary to install first the 64 JVM and then run the generic installer with the -d64 bit option. If this is not performed, the installation will be the 32 default version. For more information, please refer: http://download.oracle.com/docs/cd/E13188_01/jrockit/docs50/dev_faq.html#pae

  Read the article

• MPI Cluster Debugger launch integration in VS2010

  Let's assume that you have all the HPC bits installed and that you have existing MPI code (or you created a "Hello World" project using the MPI project template). Of course, you create a single MPI application and at runtime it will correspond to multiple processes (of the same app) launched on multiple nodes (i.e. machines) on the cluster. So how do you debug such a situation by simply hitting the familiar "F5" keystroke (i.e. Debug - Start Debugging)?WATCH IT INSTEAD OF READING ABOUT ITIf you can't bear to read through all the details below, just watch this 19-minute screencast explaining this VS2010 feature. Alternatively, or even additionally, keep on reading.REQUIREMENTWhen you debug an MPI application, you would want the copying of resources from your client machine (where Visual Studio is installed) to each compute node (where Windows HPC Server is installed) to take place automatically for you. 'Resources' in the previous sentence includes your application binary, plus any binary or data dependencies it may have, plus PDBs if needed, plus the debug CRT of the correct bitness, plus msvsmon for remote debugging to work. You would also want, after copying is complete, to have your app and msvsmon launched and attached so that you can hit breakpoints back in Visual Studio on your client machine. All these thing that you would want are delivered in VS2010.STEPS TO F51. In your MPI project where you have placed a breakpoint go to Project Properties - Configuration Properties - Debugging. Ensure the "Debugger to launch" combo box value is set to MPI Cluster Debugger.2. There are a whole bunch of properties here and typically you can ignore all of them except one: Run Environment. By default it is set to run 1 process on your local machine and if you change the number after that to, for example, 4 it will launch 4 processes of your app on your local machine.You want this to run on your cluster though, so go to the dropdown arrow at the end of the Run Environment cell and open it to expose the "Edit Hpc node" menu which opens the Node Selector dialog:In this dialog you can enter (or pick from a list) the cluster head node name and then the number of processes you want to execute on the cluster and then hit OK and… you are done.3. Press F5 and watch your breakpoint get hit (after giving it some time for copying, remote execution, attachment and symbol resolution to take place).GOING DEEPERIn the MPI Cluster Debugger project properties above, you can see many additional properties to the Run Environment. They are all optional, but you may want to understand them in order to fine tune your cluster debugging. Read all about each one of these on the MSDN page Configuration Properties for the MPI Cluster Debugger.In the Node Selector dialog above you can see more options than just the Head Node name and Number of Process to run. They should be self-explanatory but I also cover them in depth in my screencast showing you an example of why you would choose to schedule processes per core versus per node. You can also read about these options on MSDN as part of the page How to: Configure and Launch the MPI Cluster Debugger.To read through an example that touches on MPI project creation, project properties, node selector, and also usage of MPI with OpenMP plus MPI with PPL, read the MSDN page Walkthrough: Launching the MPI Cluster Debugger in Visual Studio 2010.Happy MPI debugging! Comments about this post welcome at the original blog.

  Read the article

• Pro/con of using Angular directives for complex form validation/ GUI manipulation

  - by tengen

  I am building a new SPA front end to replace an existing enterprise's legacy hodgepodge of systems that are outdated and in need of updating. I am new to angular, and wanted to see if the community could give me some perspective. I'll state my problem, and then ask my question. I have to generate several series of check boxes based on data from a .js include, with data like this: $scope.fieldMappings.investmentObjectiveMap = [ {'id':"CAPITAL PRESERVATION", 'name':"Capital Preservation"}, {'id':"STABLE", 'name':"Moderate"}, {'id':"BALANCED", 'name':"Moderate Growth"}, // etc {'id':"NONE", 'name':"None"} ]; The checkboxes are created using an ng-repeat, like this: <div ng-repeat="investmentObjective in fieldMappings.investmentObjectiveMap"> ... </div> However, I needed the values represented by the checkboxes to map to a different model (not just 2-way-bound to the fieldmappings object). To accomplish this, I created a directive, which accepts a destination array destarray which is eventually mapped to the model. I also know I need to handle some very specific gui controls, such as unchecking "None" if anything else gets checked, or checking "None" if everything else gets unchecked. Also, "None" won't be an option in every group of checkboxes, so the directive needs to be generic enough to accept a validation function that can fiddle with the checked state of the checkbox group's inputs based on what's already clicked, but smart enough not to break if there is no option called "NONE". I started to do that by adding an ng-click which invoked a function in the controller, but in looking around Stack Overflow, I read people saying that its bad to put DOM manipulation code inside your controller - it should go in directives. So do I need another directive? So far: (html): <input my-checkbox-group type="checkbox" fieldobj="investmentObjective" ng-click="validationfunc()" validationfunc="clearOnNone()" destarray="investor.investmentObjective" /> Directive code: .directive("myCheckboxGroup", function () { return { restrict: "A", scope: { destarray: "=", // the source of all the checkbox values fieldobj: "=", // the array the values came from validationfunc: "&" // the function to be called for validation (optional) }, link: function (scope, elem, attrs) { if (scope.destarray.indexOf(scope.fieldobj.id) !== -1) { elem[0].checked = true; } elem.bind('click', function () { var index = scope.destarray.indexOf(scope.fieldobj.id); if (elem[0].checked) { if (index === -1) { scope.destarray.push(scope.fieldobj.id); } } else { if (index !== -1) { scope.destarray.splice(index, 1); } } }); } }; }) .js controller snippet: .controller( 'SuitabilityCtrl', ['$scope', function ( $scope ) { $scope.clearOnNone = function() { // naughty jQuery DOM manipulation code that // looks at checkboxes and checks/unchecks as needed }; The above code is done and works fine, except the naughty jquery code in clearOnNone(), which is why I wrote this question. And here is my question: after ALL this, I think to myself - I could be done already if I just manually handled all this GUI logic and validation junk with jQuery written in my controller. At what point does it become foolish to write these complicated directives that future developers will have to puzzle over more than if I had just written jQuery code that 99% of us would understand with a glance? How do other developers draw the line? I see this all over Stack Overflow. For example, this question seems like it could be answered with a dozen lines of straightforward jQuery, yet he has opted to do it the angular way, with a directive and a partial... it seems like a lot of work for a simple problem. Specifically, I suppose I would like to know: how SHOULD I be writing the code that checks whether "None" has been selected (if it exists as an option in this group of checkboxes), and then check/uncheck the other boxes accordingly? A more complex directive? I can't believe I'm the only developer that is having to implement code that is more complex than needed just to satisfy an opinionated framework.

  Read the article

• Using Private Extension Galleries in Visual Studio 2012

  - by Jakob Ehn

  Note: The installer and the complete source code is available over at CodePlex at the following location: http://inmetavsgallery.codeplex.com   Extensions and addins are everywhere in the Visual Studio ALM ecosystem! Microsoft releases new cool features in the form of extensions and the list of 3rd party extensions that plug into Visual Studio just keeps growing. One of the nice things about the VSIX extensions is how they are deployed. Microsoft hosts a public Visual Studio Gallery where you can upload extensions and make them available to the rest of the community. Visual Studio checks for updates to the installed extensions when you start Visual Studio, and installing/updating the extensions is fast since it is only a matter of extracting the files within the VSIX package to the local extension folder. But for custom, enterprise-specific extensions, you don’t want to publish them online to the whole world, but you still want an easy way to distribute them to your developers and partners. This is where Private Extension Galleries come into play. In Visual Studio 2012, it is now possible to add custom extensions galleries that can point to any URL, as long as that URL returns the expected content of course (see below).Registering a new gallery in Visual Studio is easy, but there is very little documentation on how to actually host the gallery. Visual Studio galleries uses Atom Feed XML as the protocol for delivering new and updated versions of the extensions. This MSDN page describes how to create a static XML file that returns the information about your extensions. This approach works, but require manual updates of that file every time you want to deploy an update of the extension. Wouldn’t it be nice with a web service that takes care of this for you, that just lets you drop a new version of your VSIX file and have it automatically detect the new version and produce the correct Atom Feed XML? Well search no more, this is exactly what the Inmeta Visual Studio Gallery Service does for you :-) Here you can see that in addition to the standard Online galleries there is an Inmeta Gallery that contains two extensions (our WIX templates and our custom TFS Checkin Policies). These can be installed/updated i the same way as extensions from the public Visual Studio Gallery. Installing the Service Download the installler (Inmeta.VSGalleryService.Install.msi) for the service and run it. The installation is straight forward, just select web site, application pool and (optional) a virtual directory where you want to install the service.   Note: If you want to run it in the web site root, just leave the application name blank Press Next and finish the installer. Open web.config in a text editor and locate the the <applicationSettings> element Edit the following setting values: FeedTitle This is the name that is shown if you browse to the service using a browser. Not used by Visual Studio BaseURI When Visual Studio downloads the extension, it will be given this URI + the name of the extension that you selected. This value should be on the following format: http://SERVER/[VDIR]/gallery/extension/ VSIXAbsolutePath This is the path where you will deploy your extensions. This can be a local folder or a remote share. You just need to make sure that the application pool identity account has read permissions in this folder Save web.config to finish the installation Open a browser and enter the URL to the service. It should show an empty Feed page:   Adding the Private Gallery in Visual Studio 2012 Now you need to add the gallery in Visual Studio. This is very easy and is done as follows: Go to Tools –> Options and select Environment –> Extensions and Updates Press Add to add a new gallery Enter a descriptive name, and add the URL that points to the web site/virtual directory where you installed the service in the previous step   Press OK to save the settings. Deploying an Extension This one is easy: Just drop the file in the designated folder! :-)  If it is a new version of an existing extension, the developers will be notified in the same way as for extensions from the public Visual Studio gallery: I hope that you will find this sever useful, please contact me if you have questions or suggestions for improvements!

  Read the article

• What's new in Servlet 3.1 ? - Java EE 7 moving forward

  - by arungupta

  Servlet 3.0 was released as part of Java EE 6 and made huge changes focused at ease-of-use. The idea was to leverage the latest language features such as annotations and generics and modernize how Servlets can be written. The web.xml was made as optional as possible. Servet 3.1 (JSR 340), scheduled to be part of Java EE 7, is an incremental release focusing on couple of key features and some clarifications in the specification. The main features of Servlet 3.1 are explained below: Non-blocking I/O - Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. Non-blocking I/O allow to build scalable applications. TOTD #188 provide more details about how non-blocking I/O can be done using Servlet 3.1. HTTP protocol upgrade mechanism - Section 14.42 in the HTTP 1.1 specification (RFC 2616) defines an upgrade mechanism that allows to transition from HTTP 1.1 to some other, incompatible protocol. The capabilities and nature of the application-layer communication after the protocol change is entirely dependent upon the new protocol chosen. After an upgrade is negotiated between the client and the server, the subsequent requests use the new chosen protocol for message exchanges. A typical example is how WebSocket protocol is upgraded from HTTP as described in Opening Handshake section of RFC 6455. The decision to upgrade is made in Servlet.service method. This is achieved by adding a new method: HttpServletRequest.upgrade and two new interfaces: javax.servlet.http.HttpUpgradeHandler and javax.servlet.http.WebConnection. TyrusHttpUpgradeHandler shows how WebSocket protocol upgrade is done in Tyrus (Reference Implementation for Java API for WebSocket). Security enhancements Applying run-as security roles to #init and #destroy methods Session fixation attack by adding HttpServletRequest.changeSessionId and a new interface HttpSessionIdListener. You can listen for any session id changes using these methods. Default security semantic for non-specified HTTP method in <security-constraint> Clarifying the semantics if a parameter is specified in the URI and payload Miscellaneous ServletResponse.reset clears any data that exists in the buffer as well as the status code, headers. In addition, Servlet 3.1 will also clears the state of calling getServletOutputStream or getWriter. ServletResponse.setCharacterEncoding: Sets the character encoding (MIME charset) of the response being sent to the client, for example, to UTF-8. Relative protocol URL can be specified in HttpServletResponse.sendRedirect. This will allow a URL to be specified without a scheme. That means instead of specifying "http://anotherhost.com/foo/bar.jsp" as a redirect address, "//anotherhost.com/foo/bar.jsp" can be specified. In this case the scheme of the corresponding request will be used. Clarification in HttpServletRequest.getPart and .getParts without multipart configuration. Clarification that ServletContainerInitializer is independent of metadata-complete and is instantiated per web application. A complete replay of What's New in Servlet 3.1: An Overview from JavaOne 2012 can be seen here (click on CON6793_mp4_6793_001 in Media). Each feature will be added to the JSR subject to EG approval. You can share your feedback to [email protected]. Here are some more references for you: Servlet 3.1 Public Review Candidate Downloads Servlet 3.1 PR Candidate Spec Servlet 3.1 PR Candidate Javadocs Servlet Specification Project JSR Expert Group Discussion Archive Java EE 7 Specification Status Several features have already been integrated in GlassFish 4 Promoted Builds. Have you tried any of them ? Here are some other Java EE 7 primers published so far: Concurrency Utilities for Java EE (JSR 236) Collaborative Whiteboard using WebSocket in GlassFish 4 (TOTD #189) Non-blocking I/O using Servlet 3.1 (TOTD #188) What's New in EJB 3.2 ? JPA 2.1 Schema Generation (TOTD #187) WebSocket Applications using Java (JSR 356) Jersey 2 in GlassFish 4 (TOTD #182) WebSocket and Java EE 7 (TOTD #181) Java API for JSON Processing (JSR 353) JMS 2.0 Early Draft (JSR 343) And of course, more on their way! Do you want to see any particular one first ?

  Read the article

• Use a custom value object or a Guid as an entity identifier in a distributed system?

  - by Kazark

  tl;dr I've been told that in domain-driven design, an identifier for an entity could be a custom value object, i.e. something other than Guid, string, int, etc. Can this really be advisable in a distributed system? Long version I will invent an situation analogous to the one I am currently facing. Say I have a distributed system in which a central concept is an egg. The system allows you to order eggs and see spending reports and inventory-centric data such as quantity on hand, usage, valuation and what have you. There area variety of services backing these behaviors. And say there is also another app which allows you to compose recipes that link to a particular egg type. Now egg type is broken down by the species—ostrich, goose, duck, chicken, quail. This is fine and dandy because it means that users don't end up with ostrich eggs when they wanted quail eggs and whatnot. However, we've been getting complaints because jumbo chicken eggs are not even close to equivalent to small ones. The price is different, and they really aren't substitutable in recipes. And here we thought we were doing users a favor by not overwhelming them with too many options. Currently each of the services (say, OrderSubmitter, EggTypeDefiner, SpendingReportsGenerator, InventoryTracker, RecipeCreator, RecipeTracker, or whatever) are identifying egg types with an industry-standard integer representation the species (let's call it speciesCode). We realize we've goofed up because this change could effect every service. There are two basic proposed solutions: Use a predefined identifier type like Guid as the eggTypeID throughout all the services, but make EggTypeDefiner the only service that knows that this maps to a speciesCode and eggSizeCode (and potentially to an isOrganic flag in the future, or whatever). Use an EggTypeID value object which is a combination of speciesCode and eggSizeCode in every service. I've proposed the first solution because I'm hoping it better encapsulates the definition of what an egg type is in the EggTypeDefiner and will be more resilient to changes, say if some people now want to differentiate eggs by whether or not they are "organic". The second solution is being suggested by some people who understand DDD better than I do in the hopes that less enrichment and lookup will be necessary that way, with the justification that in DDD using a value object as an ID is fine. Also, they are saying that EggTypeDefiner is not a domain and EggType is not an entity and as such should not have a Guid for an ID. However, I'm not sure the second solution is viable. This "value object" is going to have to be serialized into JSON and URLs for GET requests and used with a variety of technologies (C#, JavaScript...) which breaks encapsulation and thus removes any behavior of the identifier value object (is either of the fields optional? etc.) Is this a case where we want to avoid something that would normally be fine in DDD because we are trying to do DDD in a distributed fashion? Summary Can it be a good idea to use a custom value object as an identifier in a distributed system (solution #2)?

  Read the article

• com.jcraft.jsch.JSchException: Auth cancel

  - by Dan Fabulich

  I'm trying to write an Ant script to retrieve an URL via port tunnelling. It works great when I use a password (the names xxxx'd out for privacy): <project default="main"> <target name="main"> <sshsession host="xxxx" username="xxxx" password="xxxx"> <LocalTunnel lport="1080" rhost="xxxx" rport="80"/> <sequential> <get src="http://localhost:1080/xxxx" dest="/tmp/xxxx"/> </sequential> </sshsession> </target> </project> But it doesn't work when I use a keyfile, like this: <sshsession host="xxxx" username="xxxx" keyfile="/Users/xxxx/.ssh/id_dsa" passphrase="xxxx"> <LocalTunnel lport="1080" rhost="xxxx" rport="80"/> <sequential> <get src="http://localhost:1080/xxxx" dest="/tmp/xxxx"/> </sequential> </sshsession> I get this exception: /tmp/build.xml:8: com.jcraft.jsch.JSchException: Auth cancel at com.jcraft.jsch.Session.connect(Session.java:451) at com.jcraft.jsch.Session.connect(Session.java:150) at org.apache.tools.ant.taskdefs.optional.ssh.SSHBase.openSession(SSHBase.java:223) I'm sure I'm using the correct keyfile (I've tried using the wrong name, which gives a legitimate FileNotFoundException). I can successfully ssh from the command line without being prompted for a password. I'm sure I'm using the correct passphrase for the keyfile. What's the cause of this error and what can I do about it?

  Read the article

• MVC Html.ActionLink not passing querystring properly

  - by Dave Hanna

  This seems like it should be pretty straight forward, but I'm apparently confused. I have a List view that displays a paged list. At the bottom I have a set of actionlinks: <%= Html.ActionLink("First Page", "List", new { page = 1} ) %> &nbsp; <%= Html.ActionLink("Prev Page", "List", new { page = Model.PageNumber - 1 }) %> &nbsp; <%= Html.ActionLink("Next Page", "List", new { page = Model.PageNumber + 1 }) %> &nbsp; <%= Html.ActionLink("Last Page", "List", new { page = Model.LastPage } )%> I'm using the basic default routes setup, except with "List" substituted for "Index": routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "List", id = UrlParameter.Optional } // Parameter defaults ); The problem is that the ActionLink helpers are generating links of the form: http://localhost:2083/Retrofit?page=2 rather than http://localhost:2083/Retrofit/?page=2 (with the trailing slash after the controller name & before the query string). When the first URL is routed, it completely loses the query string - if I look at Request.QueryString by the time it gets to the controller, it's null. If I enter the second URL (with the trailing slash), it comes in properly (i.e., QueryString of "page=2"). So how can I either get the ActionLink helper to generate the right URL, or get the Routing to properly parse what ActionLink is generating? Thanks.

  Read the article

• JavaMail: Could not connect to SMPT server.

  - by javacode

  Hi The following code causes an error. Please help me understand what's wrong. import javax.mail.*; import javax.mail.internet.*; import java.util.*; public class SendMail { public static void main(String [] args)throws MessagingException { SendMail sm=new SendMail(); sm.postMail(new String[]{"[email protected]"},"hi","hello","[email protected]"); } public void postMail( String recipients[ ], String subject, String message , String from) throws MessagingException { boolean debug = false; //Set the host smtp address Properties props = new Properties(); props.put("mail.smtp.host", "webmail.emailmyname.com"); // create some properties and get the default Session Session session = Session.getDefaultInstance(props, null); session.setDebug(debug); // create a message Message msg = new MimeMessage(session); // set the from and to address InternetAddress addressFrom = new InternetAddress(from); msg.setFrom(addressFrom); InternetAddress[] addressTo = new InternetAddress[recipients.length]; for (int i = 0; i < recipients.length; i++) { addressTo[i] = new InternetAddress(recipients[i]); } msg.setRecipients(Message.RecipientType.TO, addressTo); // Optional : You can also set your custom headers in the Email if you Want msg.addHeader("MyHeaderName", "myHeaderValue"); // Setting the Subject and Content Type msg.setSubject(subject); msg.setContent(message, "text/plain"); Transport.send(msg); } } Exception: Exception in thread "main" javax.mail.MessagingException: Could not connect to SMTP host: webmail.emailmyname.com, port: 25, response: 421 at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1694) at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:525) at javax.mail.Service.connect(Service.java:291) at javax.mail.Service.connect(Service.java:172) at javax.mail.Service.connect(Service.java:121) at javax.mail.Transport.send0(Transport.java:190) at javax.mail.Transport.send(Transport.java:120) at SendMail.postMail(SendMail.java:45) at SendMail.main(SendMail.java:9)

  Read the article

• ASP.NET MVC 3: RouteExistingFiles = true seems to have no effect

  - by Oleksandr Kaplun

  I'm trying to understand how RouteExistingFiles works. So I've created a new MVC 3 internet project (MVC 4 behaves the same way) and put a HTMLPage.html file to the Content folder of my project. Now I went to the Global.Asax file and edited the RegisterRoutes function so it looks like this: public static void RegisterRoutes(RouteCollection routes) { routes.RouteExistingFiles = true; //Look for routes before looking if a static file exists routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new {controller = "Home", action = "Index", id = UrlParameter.Optional} // Parameter defaults ); } Now it should give me an error when I'm requesting a localhost:XXXX/Content/HTMLPage.html since there's no "Content" controller and the request definitely hits the default pattern. But instead I'm seeing my HTMLPage. What am I doing wrong here? Update: I think I'll have to give up. Even if I'm adding a route like this one: routes.MapRoute("", "Content/{*anything}", new {controller = "Home", action = "Index"}); it still shows me the content of the HTMLPage. When I request a url like ~/Content/HTMLPage I'm getting the Index page as expected, but when I add a file extenstion like .html or .txt the content is shown (or a 404 error if the file does not exist). If anyone can check this in VS2012 please let me know what result you're getting. Thank you.

  Read the article

• Self-reference entity in Hibernate

  - by Marco

  Hi guys, I have an Action entity, that can have other Action objects as child in a bidirectional one-to-many relationship. The problem is that Hibernate outputs the following exception: "Repeated column in mapping for collection: DbAction.childs column: actionId" Below the code of the mapping: <?xml version="1.0"?> <!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hibernate Mapping DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd"> <hibernate-mapping> <class name="DbAction" table="actions"> <id name="actionId" type="short" /> <property not-null="true" name="value" type="string" /> <set name="childs" table="action_action" cascade="all-delete-orphan"> <key column="actionId" /> <many-to-many column="actionId" unique="true" class="DbAction" /> </set> <join table="action_action" inverse="true" optional="false"> <key column="actionId" /> <many-to-one name="parentAction" column="actionId" not-null="true" class="DbAction" /> </join> </class> </hibernate-mapping>

  Read the article

• Asp.net MVC Route class that supports catch-all parameter anywhere in the URL

  - by Robert Koritnik

  the more I think about it the more I believe it's possible to write a custom route that would consume these URL definitions: {var1}/{var2}/{var3} Const/{var1}/{var2} Const1/{var1}/Const2/{var2} {var1}/{var2}/Const as well as having at most one greedy parameter on any position within any of the upper URLs like {*var1}/{var2}/{var3} {var1}/{*var2}/{var3} {var1}/{var2}/{*var3} There is one important constraint. Routes with greedy segment can't have any optional parts. All of them are mandatory. Example This is an exemplary request http://localhost/Show/Topic/SubTopic/SubSubTopic/123/This-is-an-example This is URL route definition {action}/{*topicTree}/{id}/{title} Algorithm Parsing request route inside GetRouteData() should work like this: Split request into segments: Show Topic SubTopic SubSubTopic 123 This-is-an-example Process route URL definition starting from the left and assigning single segment values to parameters (or matching request segment values to static route constant segments). When route segment is defined as greedy, reverse parsing and go to the last segment. Parse route segments one by one backwards (assigning them request values) until you get to the greedy catch-all one again. When you reach the greedy one again, join all remaining request segments (in original order) and assign them to the greedy catch-all route parameter. Questions As far as I can think of this, it could work. But I would like to know: Has anyone already written this so I don't have to (because there are other aspects to parsing as well that I didn't mention (constraints, defaults etc.) Do you see any flaws in this algorithm, because I'm going to have to write it myself if noone has done it so far. I haven't thought about GetVirtuaPath() method at all.

  Read the article

• ASP.NET MVC2 Routing Issue With StructureMap

  - by alphadogg

  So, in global.asax, I have: public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.IgnoreRoute(" { *favicon }", new { favicon = @"(.*/)?favicon.ico(/.*)?" }); routes.IgnoreRoute("{*robotstxt}", new { robotstxt = @"(.*/)?robots.txt(/.*)?" }); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults ); } protected void Application_Start() { var container = new Container(); ServiceLocator.SetLocatorProvider(() => new StructureMapServiceLocator(container)); ComponentRegistrar.Register(container); Debug.WriteLine(container.WhatDoIHave()); // original MVC2 code at project startup AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); } and in my StructureMapControllerFactory, I have: protected override IController GetControllerInstance(RequestContext requestContext, Type controllerType) { if (requestContext == null) { throw new ArgumentNullException("requestContext"); } if (controllerType == null) { //return base.GetControllerInstance(requestContext, controllerType); controllerType = GetControllerType(requestContext, "Home"); requestContext.RouteData.Values["Controller"] = "Home"; requestContext.RouteData.Values["action"] = "Index"; } try { return theContainer.GetInstance(controllerType) as Controller; } catch (StructureMapException) { System.Diagnostics.Debug.WriteLine(theContainer.WhatDoIHave()); throw; } } Now, normally, in most examples you find on the net, when controllerType is null, you have the commented out line (base.GetControllerInstance()) that handles it. However, if I use that, I get an error about not finding the controller for default.aspx when the controllerType is null at startup of the web app. If I force the use of the Home controller, I get the site to appear. What am I doing wrong? Is it a problem in routing?

  Read the article

• A tool to aid completion of missing or incomplete source code documentation

  - by Pekka

  I have several finished, older PHP projects with a lot of includes that I would like to document in javadoc/phpDocumentor style. While working through each file manually and being forced to do a code review alongside the documenting would be the best thing, I am, simply out of time constraints, interested in tools to help me automate the task as much as possible. The tool I am thinking about would ideally have the following features: Parse a PHP project tree and tell me where there are undocumented files, classes, and functions/methods (i.e. elements missing the appropriate docblock comment) Provide a method to half-way easily add the missing docblocks by creating the empty structures and, ideally, opening the file in an editor (internal or external I don't care) so I can put in the description. Optional: Automatic recognition of parameter types, return values and such. But that's not really required. The language in question is PHP, though I could imagine that a C/Java tool might be able to handle PHP files after some tweaking. Looking forward to your suggestions! Bounty There are already very good suggestions for this (that I have not yet had the time to check out) to point out the gaps, but none yet providing aid in filling them. I want to give the question some more exposure, maybe there is some sort of a graphical extension to php_codesniffer to achieve the level of automation I'm dreaming of. Looking forward to any additional input!

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >