Search Results

Search found 17710 results on 709 pages for 'portable home directories'.

Page 51/709 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• How to resize(increase) a root+home cloned partition from a smaller hdd?

  - by saulo

  Here is my story: I had a hd failing so I cloned it with dd to larger 500gb hd. It seemed to have worked well, but I have all this unallocated free space at the end of the disk (230gb). I tried to used gparted from a liveUSB to allocate all this space to my root+home partition (other than that I only have a small extended partition with the swap). It won't let me do this. I can only create another partition, or allocate the free space to the extend partition. I can however reduce the size of the root+home partition since I wasn't using all the space Is there a way to put this free space to my root+home partition after all? Or do I have to go with another partition. If so I'd like to separate my home from the root, reduce the root partition and create a ext4 logical home partition. What would be the best safest way to do this? Thanks so much in advance, aloha

  Read the article

• Push a bookmark to a user's home screen in Android

  - by JohnTheBarber

  Android 2.1 (not sure how much that matters) My test hardware is a Motorola Droid (not sure how much that matters either) I want to push a bookmark/internet-shortcut to a user's home screen as a result of them clicking on a link - via their browser of choice. I know they can usually set the bookmark themselves and then choose to put it on their home screen. But I'd like to provide a link like "Put a shortcut to this page on your home screen" that takes care of everything kind of in the background/underneath. Is this even possible? What parts of the framework would I need access to to make it happen?

  Read the article

• Detect when home button is pressed iOS

  - by nick

  I have several iOS apps that all use the same port to listen for a network beacon. On the main view I use viewWillDisappear to close the port when another view is opened, which was working great. Then I noticed if I pressed the home button from the main view controller without opening another view to close the port, then the port stays open and non of my other apps can listen on that port any more. I then tried using viewWillUnload, but that doesn't seem to get called when I press the home button. -(void)viewWillUnload { //[super viewWillUnload]; NSLog(@"View will unload"); [udpSocket close]; udpSocket = nil; } View will unload is never displayed in the console, which leads me to believe that the method is never getting called. Is there a way to detect when the home button is pressed so I can close my port?

  Read the article

• Programmable Home Security Alarm [closed]

  - by stej

  I don't ask for recommendation! (just wanted to say that; anyway it doesn't matter now as the question is closed) I've seen some advertisements about home alarms that notifies me that something is happening in my house. None of them mentioned programmability (with real programming language like e.g C, assembler, whatever). As a programmer I'd like to have a possibility to add some behaviour, that is not part of the alarm itself. This might be: take snapshots of all cameras in a house and send it to some email send email, twitter message, skype message to some predefined account send email to a police (silly, I know) start turning the lights on and off (scary, right?) etc. (would be veeery challenging with assembler, I know; but lets suppose I can use some more high level language) I don't expect that there is a alarm system capable of this stuff, that's why I'm looking for a programmable module. Question: Is it even possible? Is it good idea (my program could crash and cause instability of the system).

  Read the article

• With a username passed to a script, find the user's home directory

  - by Clinton Blackmore

  I am writing a script that gets called when a user logs in and check if a certain folder exists or is a broken symlink. (This is on a Mac OS X system, but the question is purely bash). It is not elegant, and it is not working, but right now it looks like this: #!/bin/bash # Often users have a messed up cache folder -- one that was redirected # but now is just a broken symlink. This script checks to see if # the cache folder is all right, and if not, deletes it # so that the system can recreate it. USERNAME=$3 if [ "$USERNAME" == "" ] ; then echo "This script must be run at login!" >&2 exit 1 fi DIR="~$USERNAME/Library/Caches" cd $DIR || rm $DIR && echo "Removed misdirected Cache folder" && exit 0 echo "Cache folder was fine." The crux of the problem is that the tilde expansion is not working as I'd like. Let us say that I have a user named george, and that his home folder is /a/path/to/georges_home. If, at a shell, I type: cd ~george it takes me to the appropriate directory. If I type: HOME_DIR=~george echo $HOME_DIR It gives me: /a/path/to/georges_home However, if I try to use a variable, it does not work: USERNAME="george" cd ~$USERNAME -bash: cd: ~george: No such file or directory I've tried using quotes and backticks, but can't figure out how to make it expand properly. How do I make this work?

  Read the article

• Vista WHS Client stopped resolving local names

  - by andrewcr

  I’m running Windows Home Server PP2 in my home, with 3 client computers: two XP and one Vista. I have a router that provides my local DHCP and the server has a static IP address. The other day the Vista machine hung, and on reboot stopped resolving local names. It will show the green home server client icon in the system tray, but if I attempt to log in to the console, I get a “This computer cannot connect to your home server” message. If I ping the server name from the command line, it does not resolve, and gives a “could not find host” message. Oddly enough, if I browse the network, I can see the server, but double clicking on it fails. The other machines on the local network have no problems seeing the server, and the Vista machine has no problems resolving names from the internet, it just can’t see any local machines. I’m aware that I can work around this by adding entries to my HOSTS file (it does work), but I’d like this to work the way it’s “supposed” to. I’m an experienced computer user and developer, but not a networking whiz. Can anyone tell me how local name resolution is supposed to work in my environment and/or suggest ways to troubleshoot this? Thanks, Andy

  Read the article

• Extending home network using multiple access point originating from another access point

  - by cyberjar09

  I have a home network with the current setup (RJ45 running from main router to access point) : +-------------+ +--------------+ | 192.168.2.1 | |192.168.2.2 | | router +--------------->access point 1| +-----^-------+ +--------------+ | | +-----+--------+ | 192.168.1.1 | | modem | +-----^--------+ | | | | +--+--+ | ISP | +-----+ However I would like to extend the network to two more floors in the house via the existing Access Point (router is too far and not reachable using a network cable, hence I need to extend using current access point). Please see diagram below : +-------------+ +--------------+ +----------------+ | 192.168.2.1 | |192.168.2.2 | | 192.168.2.3 | | router +--------------->access point 1+----------> access point 2 | +-----^-------+ +--------+-----+ +----------------+ | | | | +-----+--------+ | | 192.168.1.1 | | | modem | | +-----^--------+ | +----------------+ | +----------------> 192.168.2.4 | | | access point 3 | | +----------------+ | +--+--+ | ISP | +-----+ Q1 : is this setup possible? Q2 : if possible, will I have to do anything different from what I did to setup access point 1? edit 1 : I am trying to study the dd-wrt documentation to see which would be the correct mode of operation for me Linking Routers but Im confused because I dont see any info on how to use an existing Access point to extend the signal of the SSID. If anyone could point me to the correct wiki for how I should setup AP2 and AP3 based on AP1, it would be very helpful. For AP1, I did the following Use static IP and setup same SSID as primary wireless router use same security as primary wireless router make AP1 point to 192.168.2.1 (primary router) for DHCP Thanks in advance.

  Read the article

• Cannot find network path for computer in workgroup of home Windows XP PCs

  - by John Galt

  VMWare Workstation 6.5 is running as an app on a Windows Vista 64bit PC host. Thanks to Workstation we have 2 guest machines running: TerriVM and MattVM (both of these run Windows XP SP2). We are attempting to get virtual networking configured so we can access the files of both of these VM guest systems from other real PCs connected to this home network. We think we are close but we can't quite get it right... Here is what we've done so far: * On VM Workstation, we set "Host Virtual Network Mapping" to use VMnet0 with the setting "Bridge to an automatically chosen adapter". * On each VM guest (i.e. using Windows explorer on XP), we rightmouse on the C disk, click "Sharing" tab, set shareName to "C_Disk" and check both boxes labeled "Share this folder on the network" and "Allow network users to change my files". Symptoms: On "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \TerriVM\C_Disk and assign drive letter T. We see all the folders on this shared drive and can open files on them. So that is good. On same "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \MattVM\C_Disk and assign drive letter M. We get a message box "_The network path \mattvm\C_Disk could not be found_". Alternatively, we type just \mattvm\ into the Folder box and click "Browse" and get a dialog box where we drill down from "Entire Network" to "Microsoft Windows Network" to "Workgroup" where both TerriVM and MattVM are listed as computers on the network. Clicking the + sign next to MattVM gives an hourglass and never enables the OK button and I have to cancel. In summary, I think we've attempted to share both of these virtual machines using the same techniques and connect to them in similar fashion, but one connects properly and the other machine can be seen but no shared resources on it can be accessed. Can anyone suggest something possibly overlooked or something to try? Thanks so much in advance.

  Read the article

• Website hosting from home - IIS6

  - by Paul

  I'm wanting to host a few websites from home, primarily because I'm using some BETA Microsoft software (.NET 4 and EF) and don't want to install it on my production server which is hosted at eukhost.com. Basically, I'm completely new to this sort of thing. So far, here is what I've done: Registered the domain name at namecheap.com (let's call it mydomain.com) Gone to "Nameserver Registration" in the panel and entered my IP address for the NS1 and NS2 records (let's say the IP is 0.0.0.0). Gone to "Domain Name Server Setup" and entered ns1.mydomain.com & ns2.mydomain.com Forwarded requests from port 80 to my internal IP (let's say 192.168.1.254) Created the website in IIS (I'm just testing with a single website so far, so have not created any host header values) Now, if I type in the IP address (http://0.0.0.0) I get the site as expected. However, if I enter http://www.mydomain.com I get an error saying "DNS Error - Cannot find server". I'm aware that there is a service from DynDNS that will automatically change the IP if I have a dynamic address, however my IP has remained static since I installed the ISP (since October) so I don't need this. Is there any way that I can get the DNS to work just by configuring IIS or something in Windows? I don't really want to have to pay for any 3rd party service. Thanks,

  Read the article

• How to serve media across home network?

  - by TK Kocheran

  I'm looking to share my media across my home network. Router fully supports running a DLNA server, but I don't know if it'd be better to run the server from my main server computer instead of from the router, as the router would have to operate off of a network share and my server can operate directly off of the files. Here's what I need to serve, in order of importance: ISO 1:1 DVD rips (4-8GB files), MP4/H.264 encoded videos, MKV videos, MP3 files, JPEG/CR2 images. Maybe I'm completely ludicrous for wanting to push full DVD files across my network, but in reality, I would assume that only the parts of the actual file needed (ie: menu, main video payload for main title) would be served at any one time. Plus, encoding takes time and precious disk space, so why not stream it 1:1 ;) Does anyone know of the best way to accomplish this? Main goal is to serve it to Logitech Revue downstairs and secondary goal is to serve it to other computers in the house. For music, I assume I could run a DAAP server, but I don't think that the Revue supports that (and I can't exactly throw together an app that does it just yet).

  Read the article

• How to use a home network patch panel?

  - by Torben Gundtofte-Bruun

  I'm planning a home network in a house that's not built yet. One recommendation is to add network sockets in various rooms and have them all end in a central place, where it all connects using a network switch. So far so good. Another recommendation says to not connect everything directly to the switch, but to a patch panel which in turn is connected to the switch. I'm unsure why this is good. Is there any practical advantage of using a patch panel if you're not planning to re-wire things very often? How does a patch panel actually work? Let's say it has 24 ports. Does it have another 24 ports on the backside that go to the switch, or what? Wikipedia isn't helpful on this. Clarification: I am planning to run network cables through conduits inside the walls and terminated with network sockets in the wall (as opposed to having just conduits and long regular network cables that have a normal plug in each end). Going by RedGrittyBrick's answer, a patch panel is nearly unavoidable in that case.

  Read the article

• Configuring network route between two routers on home network

  - by Paul

  I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

  Read the article

• System and Router configuration for setting up a home firewall based on Zentyal

  - by Ako

  I am not much of a system administrator, so please be patient if this looks too simple for you. I have a several computers at home, and all of them connect using an ADSL modem/router (and Wireless AP). I have been attacked several times (mainly from Russia and Ukraine), so I thought I should have some kind of firewall, besides the ESET firewall on my Windows 7. So now I have these (new) configuration: I have a small ADSL modem (Zyxel brand) which has only one Ethernet port. This modem is used to connect to internet and is configured in NAT mode. The interface has is configured with IP address 192.168.1.1. I have an old PC and I have installed zentyal on it. It has two Ethernet ports, eth0 and eth1. Eth0 is connected to the Zyxel modem with IP 192.168.1.2 and is checked as the WAN interface (external). I have another ADSL modem which is also a router with 4 Ethernet ports and Wireless AP. One of the Ethernet ports is connected to eth1 on Zentyal box. The Ethernet port's IP is 192.168.2.1 and Zentyal's eth1 is 192.168.2.2. Now, I want to enable other computers to connect to internet through the router both using Wireless and Ethernet. The problem is that I don't know how to configure the router so it routes connections to the Zentyal box. Does anyone have any clue? Again I am sorry if this looks stupid. Thanks.

  Read the article

• How To Monitor Home Wireless Network Connected Devices Bandwith

  - by GWLlosa

  (Originally posted on SuperUser, not sure if it might be better suited here) I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

  Read the article

• Proper Outlook Free/Busy status when working from home

  - by rwmnau

  Our office (pretty large - about 200 people) has recently started part-time telecommuting. It's only one day/week now, but it's already raised some questions about availability, so I wanted to see how the users here, some of whom I'm sure telecommute to a corporate job, how they set their out of office status. Outlook has four statuses, and here's what I (and most others?) take them to mean: Free: I'm available for meetings Busy: I'm in a meeting or otherwise occupied, and unavailable Tentative: Shy away from scheduling over, but I'm available if needed Out of office: I'm on vacation and unavailable. However, I don't travel for work - do people tend to use this status to mean they're remote, but available for a phone call/bridge? As we begin to telecommute, I'll be available by phone for meetings, but not in person - any meeting can have a conference bridge, but some meetings just need to be in person. I'd like to send the right message about my status - people can schedule meetings with me on my telecommute days, but they should expect me to be on a conference bridge when they do. What status do people use? Does "Out of Office" correctly reflect that you're working from home, even though I perceive this to mean that somebody is on vacation? Maybe I'm the only one confused here, but as a company that's never before done telecommuting of any kind, I'm in the dark about standard practices. Thanks for the insight! Though this isn't a technical question directly, I'm hoping it's still applicable to the group and constructive - if it's not, please close it and accept my apology.

  Read the article

• Advice for UPC/Surge Protector in home office

  - by Fred

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

• Advice for UPC/Surge Protector in home office

  - by user37755

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

• WAN Optimization for Small Office/Home Office

  - by TiernanO

  I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

  Read the article

• Need to set up a proxy on Linksys E3200 to filter home internet

  - by Justin Amberson

  the fact that I have a Linksys E3200 may not be important. I can configure the router through the web interface, but I don't know the things I will be toggling are called. I already do simple port forwarding to access applications on my Mac remotely. So router admin is not something I technically need explained. I'm looking to running a proxy on my home computer, that filters all HTTP traffic that goes through my router. So if my daughter is on her iPad and accesses Safari, my Mac will be the judge of the validity of the request. I need something like NetNanny I guess, but local. Actually, anything that can just filter all port 80 traffic that runs locally, but maybe validates with a password? I truly truly hope this question falls within the bounds of Serverfault. I'm not a total internet newb but I'm at a loss for what to Google. If possible answer this question: Is there a webapp that can listen on port 80, and validate requests to port 80 with a password? If so, can I forward all traffic on port 80 to my Mac, to be re-routed to the user? Is this the same as a VPN? Thank you for your help. Justin

  Read the article

• Jsch how to list files along with directories

  - by Rajeev

  In the following code when the command ls -a is executed why is that i see only the list of directories and not any files that are on a remote linux server JSch jsch = new JSch(); Session session = jsch.getSession(username1, ip1, 22); java.util.Properties config = new java.util.Properties(); config.put("StrictHostKeyChecking", "no"); session.setConfig(config); //session.setPassword(password.getText().toString()); session.setPassword(password1); session.connect(); final ListView mainlist = (ListView)findViewById(R.id.list); final RelativeLayout rl = (RelativeLayout)findViewById(R.id.rl); mainlist.setVisibility(View.VISIBLE); rl.setVisibility(View.INVISIBLE); String command = "ls -a"; Channel channel = session.openChannel("exec"); ((ChannelExec) channel).setCommand(command); channel.setInputStream(null); ((ChannelExec) channel).setErrStream(System.err); InputStream in = channel.getInputStream();

  Read the article

• Passing arguments to commandline with directories having spaces

  - by superstar

  Hi guys, I am making a system call from perl for ContentCheck.pl and passing parameters with directories (having spaces). So I pass them in quotes, but they are not being picked up in the ContentCheck.pl file Random.pm my $call = "$perlExe $contentcheck -t $target_path -b $base_path -o $output_path -s $size_threshold"; print "\ncall: ".$call."\n"; system($call); Contentcheck.pl use vars qw($opt_t $opt_b $opt_o $opt_n $opt_s $opt_h); # initialize getopts('t:b:o:n:s:h') or do{ print "*** Error: Invalid command line option. Use option -h for help.\a\n"; exit 1}; if ($opt_h) {print $UsagePage; exit; } my $tar; if ($opt_t) {$tar=$opt_t; print "\ntarget ".$tar."\n";} else { print " in target"; print "*** Error: Invalid command line option. Use option -h for help.\a\n"; exit 1;} my $base; if ($opt_b) {$base=$opt_b;} else { print "\nin base\n"; print "*** Error: Invalid command line option. Use option -h for help.\a\n"; exit 1;} This is the output in the commandline call: D:\tools\PacketCreationTool/bin/perl/winx64/bin/perl.exe D:/tools/PacketCr eationTool/scripts/ContentCheck.pl -t "C:/Documents and Settings/pkkonath/Deskto p/saved/myMockName.TGZ" -b "input file/myMockName.TGZ" -o myMockName.validate -s 10 target C:/Documents in base *** Error: Invalid command line option. Use option -h for help. Any suggestions are welcome! Thanks.

  Read the article

• Maven jaxb generate plugin to read xsd files from multiple directories

  - by ziggy

  If i have xsd file in the following directories src/main/resources/xsd src/main/resources/schema/common src/main/resources/schema/soap How can i instruct the maven jaxb plugin to generate jaxb classes using all schema files in the above directory? I can get it to generate the class files if i specify one of the folders but i cant get i dont know how to include all three folders. Here is how i generate the files for one folder: <plugin> <groupId>org.jvnet.jaxb2.maven2</groupId> <artifactId>maven-jaxb2-plugin</artifactId> <executions> <execution> <goals> <goal>generate</goal> </goals> </execution> </executions> <configuration> <schemaDirectory>src/main/resources/xsd</schemaDirectory> </configuration> </plugin> I tried adding multiple entries in the element but it just ignores all of them if i do that. Thanks

  Read the article

• What is reading source on an ebook reader like?

  - by Daniel Straight

  There are a few open source projects I would really like to read through the code of to understand better / improve on. The problem is, for me, reading for a long time on the computer screen is tedious. I would love to be able to read code while lounging around and on a screen that was better on my eyes. Has anyone ever tried reading code on an ebook reader? It seems like the e-ink would make it easy on the eyes, plus it would be portable, plus it wouldn't kill any trees. In other words, it sounds perfect, but before I drop a couple benjamins on an ebook reader, I'd like to hear if anyone else has tried this and how it went. It seems Scott Hanselman discussed using the Kindle to read code, but I wouldn't necessarily want a Kindle. Has anyone had a positive experience with some other device? I realize this is not directly about programming, but it relates directly to my ability to improve my skills. I think if a good portable reading device for code exists, it could help a lot of programmers.

  Read the article

• ASP.NET Web Application: use 1 or multiple virtual directories

  - by tster

  I am working on a (largish) internal web application which has multiple modules (security, execution, features, reports, etc.). All the pages in the app share navigation, CSS, JS, controls, etc. I want to make a single "Web Application" project, which includes all the pages for the app, then references various projects which will have the database and business logic in them. However, some of the people on the project want to have separate projects for the pages of each module. To make this more clear, this is what I'm advocating to be the projects. /WebInterface* /SecurityLib /ExecutionLib etc... And here is what they are advocating: /SecurityInterface* /SecutiryLib /ExecutionInterface* /ExecutionLib etc... *project will be published to a virtual directory of IIS Basically What I'm looking for is the advantages of both approaches. Here is what I can think of so far: Single Virtual Directory Pros Modules can share a single MasterPage Modules can share UserControls (this will be common) Links to other modules are within the same Virtual directory, and thus don't need to be fully qualified. Less chance of having incompatible module versions together. Multiple Virtual Directories Pros Can publish a new version of a single module without disrupting other modules Module is more compartmentalized. Less likely that changes will break other modules. I don't buy those arguments though. First, using load balanced servers (which we will have) we should be able to publish new versions of the project with zero downtime assuming there are no breaking database changes. Second, If something "breaks" another module, then there is either an improper dependency or the break will show up eventually in the other module, when the developers copy over the latest version of the UserControl, MasterPage or dll. As a point of reference, there are about 10 developers on the project for about 50% of their time. The initial development will be about 9 months.

  Read the article

• Subversion update misses new directories

  - by Mike Q

  Hi all, Periodically we have trouble with SVN when doing updates. Very occasionally when someone adds a new directory doing an update through Tortoise doesn't work. If we do a "Fully Recursive" update using "Update from revision..." option then it picks it up fine. I'm poked around and seen this question which is virtually identical but with no answer. I've found the item on the SVN website, referenced by that post, that talks about an issue in 1.6.0 which is now fixed. However my SVN version is 1.6.9 and Tortoise is 1.6.7 so I wouldn't expect to have this problem any more. This only seems to occur with new directories, never seen it for individual files. We may have had older versions of Tortoise at one point (can't remember which tho) so maybe some issue has been introduced into our repo that an upgrade doesn't solve. We have the workaround but it wastes a few minutes of head-scratching after failed builds to figure it out and people who haven't come across this problem before really struggle until they ask someone else. Anyone know if this is a known bug and any permanent solutions? Thanks.

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >