Search Results

Search found 19703 results on 789 pages for 'virtual ip'.

Page 51/789 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Question about Remote WAN IP on NetGear FVS336G VPN setup

  - by camilian

  I wanted to be able to have a VPN connection to my home network so I purchased the FVS336G because the reviews said it was easy set up. I am sure it is for someone that knows what needs to be entered it is easy, but I am a little confused. Using the VPN wizard I choose VPN Client as the tunnel connection, enter key, etc... but then I get to the "What is the remote WAN's IP or Internet Name" and "What is the local WAN's IP address or Internet Name" I am lost. I am probably being really dumb, but I am not sure what I need to put in here. Is the remote WAN ip the ip from the outside world to my cable modem? Is the local ip the ip to my FVS336G? Any help would be appreciated.

  Read the article

• Forwarding udp ports iptables packets "lost"?

  - by Dindihi

  I have a Linux router (Debian 6.x) where i forward some ports to internal services. Some tcp ports (like 80, 22...) are OK. I have one Application listening on port 54277udp. No return is coming from this app, i only get Data on this port. Router: cat /proc/sys/net/ipv4/conf/all/rp_filter = 1 cat /proc/sys/net/ipv4/conf/eth0/forwarding = 1 cat /proc/sys/net/ipv4/conf/ppp0/forwarding = 1 $IPTABLES -t nat -I PREROUTING -p udp -i ppp0 --dport 54277 -j DNAT --to-destination $SRV_IP:54277 $IPTABLES -I FORWARD -p udp -d $SRV_IP --dport 54277 -j ACCEPT Also MASQUERADING internal traffic to ppp0(internet) is active & working. Default Policy INPUT&OUTPUT&FORWARD is DROP What is strange, when i do: tcpdump -p -vvvv -i ppp0 port 54277 I get a lot of traffic: 18:35:43.646133 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.652301 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.653324 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.655795 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.656727 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.659719 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 tcpdump -p -i eth0 port 54277 (on the same machine, the router) i get much less traffic. also on the destination $SRV_IP there are only a few packets coming in, but not all. INTERNAL SERVER: 19:15:30.039663 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.276112 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.726048 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 So some udp ports are "ignored/dropped" ? Any idea what could be wrong? Edit: This is strange: The Forward rule has data packets, but the PREROUTING rule has 0 packets... iptables -nvL -t filter |grep 54277 Chain FORWARD (policy DROP 0 packets, 0 bytes) 168 8401 ACCEPT udp -- * * 0.0.0.0/0 192.168.215.4 state NEW,RELATED,ESTABLISHED udp dpt:54277 iptables -nvL -t nat |grep 54277 Chain PREROUTING (policy ACCEPT 405 packets, 24360 bytes) 0 0 DNAT udp -- ppp0 * 0.0.0.0/0 my.external.ip udp dpt:54277 state NEW,RELATED,ESTABLISHED to:192.168.215.4

  Read the article

• Windows CE: Changing Static IP Address

  - by Bruce Eitman

  A customer contacted me recently and asked me how to change a static IP address at runtime.  Of course this is not something that I know how to do, but with a little bit of research I figure out how to do it. It turns out that the challenge is to request that the adapter update itself with the new IP Address.  Otherwise, the change in IP address is a matter of changing the address in the registry for the adapter.   The registry entry is something like: [HKEY_LOCAL_MACHINE\Comm\LAN90001\Parms\TcpIp]    "EnableDHCP"=dword:0    "IpAddress"="192.168.0.100"     "DefaultGateway"="192.168.0.1"    "Subnetmask"="255.255.255.0" Where LAN90001 would be replace with your adapter name.  I have written quite a few articles about how to modify the registry, including a registry editor that you could use. Requesting that the adapter update itself is a matter of getting a handle to the NDIS driver, and then asking it to refresh the adapter.  The code is: #include <windows.h> #include "winioctl.h" #include "ntddndis.h"   void RebindAdapter( TCHAR *adaptername ) {       HANDLE hNdis;       BOOL fResult = FALSE;       int count;         // Make this function easier to use - hide the need to have two null characters.       int length = wcslen(adaptername);       int AdapterSize = (length + 2) * sizeof( TCHAR );       TCHAR *Adapter = malloc(AdapterSize);       wcscpy( Adapter, adaptername );       Adapter[ length ] = '\0';       Adapter[ length +1 ] = '\0';           hNdis = CreateFile(DD_NDIS_DEVICE_NAME,                   GENERIC_READ | GENERIC_WRITE,                   FILE_SHARE_READ | FILE_SHARE_WRITE,                   NULL,                   OPEN_ALWAYS,                   0,                   NULL);         if (INVALID_HANDLE_VALUE != hNdis)       {             fResult = DeviceIoControl(hNdis,                         IOCTL_NDIS_REBIND_ADAPTER,                         Adapter,                         AdapterSize,                         NULL,                         0,                         &count,                         NULL);             if( !fResult )             {                   RETAILMSG( 1, (TEXT("DeviceIoControl failed %d\n"), GetLastError() ));             }             CloseHandle(hNdis);       }       else       {             RETAILMSG( 1, (TEXT("Failed to open NDIS Handle\n")));       }   }       int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR    lpCmdLine, int       nCmdShow) {     RebindAdapter( TEXT("LAN90001") );     return 0; }   If you don’t want to write any code, but instead plan to use a registry editor to change the IP Address, then there is a command line utility to do the same thing.  NDISConfig.exe can be used: Ndisconfig adapter rebind LAN90001    Copyright © 2012 – Bruce Eitman All Rights Reserved

  Read the article

• ADF updates: mobile virtual developer day & ADF Mobile 1 day Workshop & ADF Architecture TV

  - by JuergenKress

  ADF Mobile Virtual Developer Day Sessions - YouTube ADF Architecture TV – flows WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum WikiTechnorati Tags: adf,ADF Architecture,ADF education,virtual developer day,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• PASS Professional Development Virtual Chapter Reboot

  - by AjarnMark

  The Professional Development Virtual Chapter for PASS is holding its first virtual meeting on Thursday, May 13 at 1:00 PM Eastern / 10:00 AM Pacfic time.  Andy Warren (@sqlandy) will be the speaker.  Click here to attend via Live Meeting.  Also, check the http://prof-dev.sqlpass.org web site and RSS Feed for ongoing updates and details.

  Read the article

• make vnc server listen on guest's ip address

  - by gucki

  My host system has the IP 192.168.0.250. Now I want to create a kvm guest using a tap device (so the network card of the guest just acts like a "real" one). The guest has a static ip 192.168.0.249 which it setups on his own (no dhcp). To connect to the guest using VNC I can to use the host's IP. So far everything works fine. Now I wonder how I can make the VNC server to listen on the guest's IP address, so I can use the guest's IP address to connect using my vnc client. Of course I cannot use -vnc 192.168.0.249:1 as this IP is not active on the host and so fails with Cannot assign requested address. Can this be done with tap networking at all? If not, how to get it working?

  Read the article

• Prevent virtual host on same server interact on apache [closed]

  - by Soosoo Soo

  Possible Duplicate: Prevent virtual host on same server interact on apache I have a vps apache 2.0 webserver, with multiple domains and multiple IPs set. In document root /var/www/html/ I have http://serverA.com, and I create a virtual host in folder /var/www/html/serverB for http://serverB.com. They work great for both, but the problem is I can access serverB files with the URL http://serverA.com/serverB/, which I don't want to happen. How do I prevent that?

  Read the article

• Common and maximum number of virtual machines per server?

  - by Rabarberski

  For a project I am trying to get real-life estimates for the number of virtual machines per server, both typically and maximally. Of course, the maximum number of VMs would be depending on the type of applications (disk intensive, network intensive, ...), and server hardware (like number of cores, memory, ...), but still it would be useful to know if a typical maximum is about 10, 20 or 30 VMs per server. Can anybody give practical numbers?

  Read the article

• Big mail issue two ip address

  - by Luka

  I have two ip addresses on my server, First IP is assigned to my clients, second is assigned to me. Issue started today. My clients can not send mail via php from their ip address (shared ip address which are all of them using). Server is refusing it with error ERROR: Password not accepted from server: 535 Incorrect authentication data But via their desktop mail clients it can send mail, when they use my ip address for hostname (second ip of server assigned to me) they can send mail. help.

  Read the article

• Using virtual functions

  - by Tucker Morgan

  I am starting to use virtual functions, and i am programming a simple text game, my question is this, if i have a virtual function called spec_abil with in a Super class called rpg_class. If you allow the player to class what class they want to play, say a mage class, a archer class, and a warrior class, which all have their own spec_abil function. How do you write it so that the program knows which one to use depending on the chosen class.

  Read the article

• Connect to virtual host computer from within virtualbox

  - by Nicky De Maeyer

  I'm currently developing on an ubuntu karmic. For this I've installed lampp with a virtual host on apache so http://myproject/ is mapped to my project's root directory. Now to test the website in IE I've installed an XP machine on a virtualBox OSE. Ive managed to get the virtual host working on the XP by adding its to the hostfile, like this: 255.255.255.255 myproject where 255.255.255.255 is the ip adress of the host computer (my ubuntu). Now every day when I come to work and plug in my computer to the network, my IP has changed. so When i boot the XP I have to change the IP in the hostfile to my new IP. Is there any way where I can set the ip to somthing the XP will recognise as the host machine? I've tried replacing the IP in the hostfile by the host computer name, but that does not seem to work... This would make my like a bit easier :)

  Read the article

• 30,000 Virtual Appliance in Service from VirtualBoxImages.com

  <b>VirtualBoxImages.com:</b> When I first found VirtualBox and created my first Virtual Machine VirtualBox was still owned by a small company in Germany. Few people know of the project and fewer thought it was a good idea to build and distribute pre-installed virtual machines.

  Read the article

• Virtual Machine Storage Provisioning and best practises

  If you're using Virtualization technology, then at some point you'll have run out of (or will run out of) virtual disk space, & had to provision extra storage; are you confident that you know how to do that? Sean Duffy makes sure you're doing it right, sharing his recommendations and tips in this step-by-step guide to Virtual Machine Storage provisioning for VMware. Follow this advice, and you'll be a Virtualization Veteran in no time.

  Read the article

• Replies to request coming over a relay goes to relay's internal IP, not to original request's source IP

  - by seaquest

  Dhcpd running on Linux gets a dhcp request over dhcrelay which is running on other remote machine. Oct 6 10:09:46 2012 dhcpd: DHCPDISCOVER from 00:1e:68:06:eb:37 (oguz-U300) via 172.16.17.81 tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes 10:35:01.112500 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 328) 192.168.0.81.67 > 192.168.0.1.67: BOOTP/DHCP, Request from 00:1e:68:06:eb:37, length: 300, hops:1, xid:0xe378fc7e, flags: [none] (0x0000) Gateway IP: 172.16.17.81 Client Ethernet Address: 00:1e:68:06:eb:37 [|bootp] It matches to a subnet and send reply. However reply does not go to the requesting dhcrelay external IP(192.168.0.81). Instead, it goes to the internal interface IP of machine running dhcrelay. And I think because of this remote machine running dhcrelay or the dhcrealy itself discarding packet. Oct 6 10:09:46 2012 dhcpd: DHCPOFFER on 172.16.17.11 to 00:1e:68:06:eb:37 (oguz-U300) via 172.16.17.81 10:35:02.050108 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 328) 192.168.0.1.67 > 172.16.17.81.67: BOOTP/DHCP, Reply, length: 300, hops:1, xid:0xe378fc7e, flags: [none] (0x0000) Your IP: 172.16.17.11 Gateway IP: 172.16.17.81 Client Ethernet Address: 00:1e:68:06:eb:37 [|bootp] Is this a normal behaviour? Machine running dhcrelay: eth1(ext) Link encap:Ethernet HWaddr 00:90:0B:21:43:F4 inet addr:192.168.0.81 Bcast:192.168.0.255 Mask:255.255.255.0 eth2(int) Link encap:Ethernet HWaddr 00:90:0B:21:43:F5 inet addr:172.16.17.81 Bcast:172.16.17.255 Mask:255.255.255.0 3582 ? Ss 0:00 /usr/sbin/dhcrelay -i eth2 192.168.0.1 Machine running dhcpd: eth1 Link encap:Ethernet HWaddr 00:90:0B:23:97:D1 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 option domain-name "test.com"; option subnet-mask 255.255.255.0; authoritative; ignore client-updates; ddns-update-style ad-hoc; default-lease-time 86400; max-lease-time 86400; subnet 192.168.0.0 netmask 255.255.255.0 { range 192.168.0.135 192.168.0.169; option broadcast-address 192.168.0.255; option domain-name-servers 192.168.0.1; option domain-name "test.com"; option routers 192.168.0.1; } subnet 172.16.17.0 netmask 255.255.255.0 { local-address 192.168.0.1; server-identifier 192.168.0.1; range 172.16.17.10 172.16.17.11; option broadcast-address 172.16.17.255; option routers 172.16.17.81; } (I put local-address and server-identifier. But this does not help ) Regards, -- Oguz YILMAZ UPDATE: The first problem is found. I have configured dhcrelay only on listening internel interface. It seems (of course) is should also listen to external interface for replies. It appears it is not important where the packet destined to. dhrelay will forward it to internal net. HOWEVER, I have deleted route on dhcpd server to reach 172.16.17.x subnet. It again tries to send reply to 172.16.17.81. Because it does not know the route it send it from default gateway to the internet. eth0: IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 328) 192.168.1.2.67 > 172.16.17.81.67: BOOTP/DHCP, Reply, length: 300, hops:1, xid:0x32830125, secs:3, flags: [none] (0x0000) eth0: Your IP: 172.16.17.11 eth0: Gateway IP: 172.16.17.81 eth0: Client Ethernet Address: 00:1e:68:06:eb:37 [|bootp] How can I force dhcpd to force to send replies to requesting IP? Because, it is not much meaningful to add routes to subnet we distribute IP for. Internet - dhcpd - 192.168.0.1 - SOMENET - 192.168.0.81 - dhcrelay - 172.16.17.0/24 192.168.0.1 has no route for 172.16.17.0 and has no interface directly attached to that net.

  Read the article

• Virtual Management with Oracle Enterprise Manager

  - by Get_Specialized!

  Whether you have already been working with Oracle VM or considering to use it, there are management capabilities available to you to use as a partner as part of your solution or services. The integration of Oracle VM Server for x86 with Oracle Enterprise Manager Ops Center provides you the platform to manage Oracle VM Manager, Oracle VM Servers, server pools, and the virtual machines through Oracle Enterprise Manager Ops Center UI. If you utilize Oracle Enterprise Manager Ops Center, the following are example management operations available to you for Oracle VM Server for x86 deployments: Discover deployed Oracle VM Managers Provision Oracle VM Servers Discover existing Oracle VM Servers Launch Oracle VM Manager UI Create virtual machines Provision OS on virtual machines Create server pools Connect to Oracle VM Manager console Manage storage repositories of Oracle VM Server for x86 Perform management operations on Oracle VM Servers and virtual machines Learn more about this capability from the reference guide Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here. For more information about Oracle Enterprise Manager and how it can be used by partners join the Oracle PartnerNetwork KnowledgeZone at http://www.oracle.com/partners/goto/enterprisemanager

  Read the article

• Is there a way to map a local drive letter in a Virtual PC Guest O/S to a host drive?

  - by Clay Nichols

  I have a bunch of programming projects on my P:\ drive (on Windows 7) I'm now doing some programming within Virtual PC Windows XP Mode and I'd like to "call" that drive, within the Win XP guest, the P: drive. I've mapped drive letter P: to "network" drive on the Host but that goes across the network so it's very slow. I tried using the SUBST command but it wouldn't take the \tsclients\p as a parameter. Basically, the command line interpreter (is that DOS on Win 7 ??) doesn't recognize that directory (\tsclients\p)

  Read the article

• Virtual Lab part 2&ndash;Templates, Patterns, Baselines

  - by Geoff N. Hiten

  Once you have a good virtualization platform chosen, whether it is a desktop, server or laptop environment, the temptation is to build “X”.  “X” may be a SharePoint lab, a Virtual Cluster, an AD test environment or some other cool project that you really need RIGHT NOW.  That would be doing it wrong. My grandfather taught woodworking and cabinetmaking for twenty-seven years at a trade school in Alabama.  He was the first instructor hired at that school and the only teacher for the first two years.  His students built tables, chairs, and workbenches so the school could start its HVAC courses.   Visiting as a child, I also noticed many extra “helper” stands, benches, holders, and gadgets all built from wood.  What does that have to do with a virtual lab, you ask?  Well, that is the same approach you should take.  Build stuff that you will use.  Not for solving a particular problem, but to let the Virtual Lab be part of your normal troubleshooting toolkit. Start with basic copies of various Operating Systems.  Load and patch server and desktop OS environments.  This also helps build your collection of ISO files, another essential element of a virtual Lab.  Once you have these “baseline” images, you can use your Virtualization software’s snapshot capability to freeze the image.  Clone the snapshot and you have a brand new fully patched machine in mere moments.  You may have to sysprep some of the Microsoft OS environments if you are going to create a domain environment or experiment with clustering.  That is still much faster than loading and patching from scratch. So once you have a stock of raw materials (baseline images in this case) where should you start.  Again, my grandfather’s workshop gives us the answer.  In the shop it was workbenches and tables to hold large workpieces that made the equipment more useful.  In a Windows environment the same role falls to the fundamental network services:  DHCP, DNS, Active Directory, Routing, File Services, and Storage services.  Plan your internal network setup.  Build out an AD controller with all the features listed.  Make the actual domain an isolated domain so it will not care about where you take it.  Add the Microsoft iSCSI target.  Once you have this single system, you can leverage it for almost any network environment beyond a simple stand-alone system. Having these templates and fundamental infrastructure elements ready to run means I can build a quick lab in minutes instead of hours.  My solutions are well-tested, my processes fully documented with screenshots, and my plans validated well before I have to make any changes to client systems.  the work I put in is easily returned in increased value and client satisfaction.

  Read the article

• SEO best practices for a web feature that uses geolocation by IP Address

  - by Nick

  I'm working on a feature that tailors content based on a geo location lookup by IP address in order to provide information based on the general area where this visitor is from. I'm concerned that content will be interpreted as focused solely on the search engine spider's geo origin when it is indexed. Are there SEO best practices for geo location by ip address features? I appreciate any specific tips or words of wisdom.

  Read the article

• Virtual Grocery Store

  - by David Dorf

  Because South Korean's are so busy, Tesco decided that its Homeplus grocery chain should offer a virtual alternative in subways.  As you can see in the video below, shoppers passing through a subway station can see a virtual representation of the store and scan items with their mobile phones.  This builds a shopping list which is delivered to their homes later that day. This is a very cool example of leveraging technology to offer a shopping experience that's different from bricks and clicks.

  Read the article

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• Adding a second IP address for IIS - static vs dynamic A records

  - by serialhobbyist

  I'm looking to add a second IP address to IIS so that I can run two sites with different SSL certificates. When I added one on my play box and ran ipconfig /registerdns both addresses were registered in DNS with the server's name. So, I deleted the A record for the new IP address and rebooted. That also registered both names. So, then I went into the network config for the adapter and, on the DNS tab, unchecked "Register this connection's addresses in DNS". I deleted the A record for the new IP address again and re-ran ipconfig /registerdns. This time, it deleted the A record for the old IP address and didn't created one for the new address. Neither of these is what I want: I want the main IP address to be registered and refreshed automatically as a dynamic DNS record and the second IP address to be registered and managed as a static address. Is there any way to achieve this?

  Read the article

• how to restrict wampserver access to certain ip addresses

  - by user28233

  What do I need to do in order to restrict the access to my wamp server to certain ip addresses. Just imagine that the my ip address is the ip address that I only want to have access I tried to edit the .htaccess # This folder does not require access over HTTP # (the following directive denies access by default) Order allow,deny Allow from 112.203.229.44 and the phpmyadmin.conf: Alias /phpmyadmin "E:/wamp/apps/phpmyadmin3.2.0.1/" # to give access to phpmyadmin from outside # replace the lines # # Order Deny,Allow # Deny from all # Allow from my ip address # # by # # Order Allow,Deny # Allow from my ip address # <Directory "E:/wamp/apps/phpmyadmin3.2.0.1/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from my ip address </Directory>

  Read the article

• Who are good suppliers of .NET 4 Hosted Virtual Private Servers ? (May 2010)

  - by Nick Haslam

  I'm looking for a supplier for hosting a Virtual server, running Windows Server 2008 (R2 ideally) and .NET 4 to run an internet facing ASP.NET web application. I'd also like to be able to remote desktop onto it, and install other apps as necessary, including other websites as and when. I'm based in the UK, so a UK based supplier would be great. I was looking at Fasthosts, but having researched them a bit more, they look like a bad idea.

  Read the article

• In Windows Virtual PC: Is there a way to assign local drive letter in the Guest O/S that points to a

  - by Clay Nichols

  I have a bunch of programming projects on my P:\ drive (on Windows 7) I'm now doing some programming within Virtual PC Windows XP Mode and I'd like to "call" that drive, within the Win XP guest, the P: drive. I've mapped drive letter P: to "network" drive on the Host but that goes across the network so it's very slow. I tried using the SUBST command but it wouldn't take the \tsclients\p as a parameter. Basically, the command line interpreter (is that DOS on Win 7 ??) doesn't recognize that directory (\tsclients\p)

  Read the article

• Windows Virtual PC File Copy from host very slow

  - by Shiv Kumar

  I have a Windows 7 desktop on which I've installed Windows Virtual PC and an instance Windows 7. I also have virtual XP instance on the same host. The problem I am having is that copying files from the host to the virtual machine is dog slow. I'm talking 17KB/sec. The host machine has a gigbit NIC. While using the XP virtual instance to do the same I didn't notice a huge difference but on the Window 7 virtual instance the time is really slowing me down. Is there something I need to do (settings) to fix this? I've attached an image of the Resource monitor (of the virtual Windows 7 instance) that shows my network traffic going in bursts rather than relatively steady. The files are on a "public" folder on my host machine.

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >