Search Results

Search found 8555 results on 343 pages for 'virtualbox networking'.

Page 51/343 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• VirtualBox: How to connect to Internet via wi-fi on Mac?

  - by Paul Riedel

  I installed VirtualBox with a Win XP VM on my Mac running OS 10.7.5. My Mac only has a wi-fi connection to the internet. On the settings for the virtual host, I set: Attached to: Bridged Adapter Name: en1: Wi-Fi (AirPort) Adapter Type: Intel PRO/1000 MT Desktop (82540EM) Promiscuous Mode: Deny Mac Address: Cable Connected: true Those are the settings I see around the internet as being correct, but I still can't ping anything. On my Mac I have internet sharing via Ethernet enabled (not sure if that matters). When I start up my WinXP VM, it asks me to install a bunch of hardware which I don't have any drivers to. Do I need to install any ethernet card drivers in order for the internet to work? Thank you!!

  Read the article

• Bricked - tty mode incorrect, terminal disabled, unity broken

  - by user989805

  After installing VirtualBox unity seems to be uninstalled.. Launcher and task bar are missing. I can't access terminal from the normal ctrl alt T command. I tried logging into TTY mode but it says my login is incorrect. I am trying to login with my normal ubuntu username and password. I have searched for solutions but since I dont have terminal or TTY I cant bash out any commands, and I have tried safeboot but the root terminal always says it cant run whatever command I enter. I am really lost and I am trying to avoid a fresh install :( I greatly and genuinely appreciate any help! This is the computer I use for college!

  Read the article

• How do I open up firewall while keeping it safe?

  - by d3vid

  Since I've installed Firestarter I have encountered connectivity issues that are all resolved by disabling the firewall. I'd prefer to have the firewall running and allow all the traffic I normally use: Wired network + wireless network, whichever I'm connected to, or both (1) OpenVPN VirtualBox internal network Samba (for accessing shared Windows folders and sharing folders to Windows) (2) BitTorrent And everything else I use that I can't think of :) All the above works without a firewall. I thought Linux was super secure (I update regularly). Do I really need it? (1) I used the Firestarter wizard and selected wlan0 as my primary connection, now whenever I plug in a network cable, I lose all connectivity. Should I just redo the wizard for eth0, or will I then lose wlan0? (2) If it makes a difference I'm sharing a directory that I share between local users using bindfs. See my answer to Good and easy way to share files on local machine

  Read the article

• Error 1130 connecting to MySQL on Ubuntu Server 12.04

  - by maGz

  I hope this is the right place for this...I currently am running Ubuntu Server 12.04 through VirtualBox on a Windows 7 host. I am trying to connect to the VM's MySQL engine using MyDB Studio for MySQL, and when I enter my MySQL login credentials, it gives me the following error back: Error 1130: Host '192.168.56.1' is not allowed to connect to this MySQL server I am running the VM with Adapter 1 enabled for NAT, and Adapter 2 enabled for Host-only Adapter. eth0 10.0.2.15 and eth1 192.168.56.21. I can connect to Apache at 192.168.56.21, and through PhpMyAdmin, everything works as it should. I did edit the /etc/mysql/my.cnf file and commented out the line bind-address = 127.0.0.1 by adding a # in front of it - I thought that this should have allowed remote connections. Any ideas on how I can solve this? What could be wrong? EDIT: I am trying to connect as 'root'. EDIT: SOLVED!!

  Read the article

• How to check command line requests routed thru TOR?

  - by Chris

  I think I have virtualbox set up so that all traffic originating from the guest OS is routed through TOR. TOR is only installed on the host OS and the web browsers on the guest OS all report TOR IP's in Europe when I test with seemyip.com. The host OS shows my real IP when going to the same sites. But I initiate a lot of requests from the Linux command line and I haven't been able to confirm to my satisfaction that these are routing through TOR, though I have no reason to think they do not. When I use this command I get no output from the guest OS, but my real IP from the host OS: dig myip.opendns.com @resolver1.opendns.com +short This bash file gives no output from either OS: #!/bin/bash echo Your external IP Address is: wget http://Www.whatismyip.com -O - -o /dev/null | grep '<TITLE>' | sed -r 's/<TITLE>WhatIsMyIP\.com \- //g' | sed -r 's/<\/TITLE>//g' exit 0 Suggestions?

  Read the article

• Mount exFAT partition in virtual guest machine

  - by Alain Jacomet

  I have a real Ubuntu 12.10 installation being virtualized under a Windows 8 host, by using the VBoxManage.exe internalcommands createrawvmdk method. I'm trying to mount an exFAT partition into the virtualized machine (which is the partition of shared work files), but even though I have fuse-exfat installed, and the partition is perfectly mountable while booting entirely into Ubuntu, I can't mount it while virtualizing it. 1- If I make a full vmdk image of the HDD, including all partitions, Ubuntu 12.10 "sees" the partition, and trying to mount it throws this error: Image: http://i.stack.imgur.com/AyUSn.png 2- If I make a machine with only the linux partitions, + the exFAT partition. Again Ubuntu "sees" the partition and the result is: Error: fsync failed Image: http://i.stack.imgur.com/u4SkC.png 3- If I make a machine with only the linux partitions, and try to mount it, Ubuntu doesn't "see" the partition, and I get this error: Image: i.stack.imgur.com/q1hz5.png I've tried using the VirtualBox' "Shared Folders" functionality but even though I install the "Guest Additions", the system doesn't seem to recognize the shared folder: Image: i.stack.imgur.com/yLU0E.png Help? Thanks!

  Read the article

• How to remove the graphical user interface?

  - by Praveen Kumar

  Ok my question is that, I want to run a heavy application, on a Virtual Machine (VirtualBox) with just 2 GB RAM (Windows 7 32Bit Host has 4 GB, 3.5 GB effective). Initially I thought of installing Ubuntu Server 12.04.1, which doesn't come with a GUI, so I thought it would be efficient in performance, but I have only Ubuntu 12.04 Desktop. My question is, is it possible to remove the GUI parts in Ubuntu 12.04 Desktop (Not Server), keeping only the core OS, after installation in a virtual machine? Or, is there anyway to improve the performance of the OS? If you need more information, I am ready to provide. I don't want the GUI or anything, even a small terminal window is fine for me, I can access files through FTP.

  Read the article

• Access secondary hard disk from Virtual Machine

  - by Frank V

  I have a fairly specific question. I had Ubuntu on my Laptop (for years). For a variety of reasons, I've had to switch to Windows but the computer has two hard drives. The main drive was reformatted and I've installed windows. The second hard drive still has the Linux system disk format (not sure on type). Obviously, windows can't access it but can I access it from a Virtual machine (VirtualBox) or will I need to load up a Live-Session to access / move the contents? Edit: If this is possible, how would one proceed to mount the disk?

  Read the article

• Black Screen When Booting From .VDI Image

  - by GTyler

  I have cloned a VirtualBox machine, which runs Ubuntu 11.04 32-bit as Guest OS. I now wish to transfer it to a new host machine running Windows Vista 32-bit. I’ve transferred the .vdi file and adjusted the name and memory. However when I boot it, the options to choose the Linux version came up: Ubuntu, with Linux 2.6.38-10-generic, Linux 2.6.38-10-generic(recovery mode) , Previous Linux versions, Memory test. Once I chose Linux 2.6.38 a black screen just appears with an underscore at the top. What should I do to get it to run? I don’t have my original machine near me now so I can only work with my .vdi image. My VB is version 4.0.10. I have tried cloning this VDI and also assigning a new UUID and making a new guest, but I still got the black screen. Thank you.

  Read the article

• MAAS fails to Commission nodes

  - by user3644848

  I'm evaluating MaaS/Juju. I followed instructions in this link http://maas.ubuntu.com/docs1.5/install.html to setup MaaS. I'm running this in Oracle VirtualBox environment so Power options are not configured for the VMs. PXE booting VM works fine. The node shuts down itself and registers with MaaS in Declared state. Issues: a) When I Commission the VM (which is in the Declared state), first it gets IP-Config: no response after 60 secs - giving up errors. (See link below for a screenshot). b) Fails to mount the boot device and drops into initramfs prompt. I've copied logs here: https://www.dropbox.com/sh/5gy9nnonbnccufo/AAD9o4awSOtyaCCmRe5q7rBva Any help to get past this is greatly appreciated. Thanks!

  Read the article

• trying to install ubuntu touch to nexus 4 - can't connect device (14.04 in virtual box on mac)

  - by Fiona Cox

  I'm trying to install Ubuntu touch to a nexus 4. I've followed all the steps so far, downloaded the packages and gotten the phone ready, but now I got to the step of connecting it to the computer [under 'Enable USB Debugging'], but it's not listed when I try $ adb devices (I tried the 'adb kill-server' command first too, but nothing is listed). I'm sure it's something simple I'm forgetting, but can anyone help please? I have debugging enabled. Running Trusty in VirtualBox on MacBook. Thanks!

  Read the article

• Unable to enumerate USB device on port 2 when connecting Android phone

  - by ProfessionalAmateur

  I'm running Ubuntu 11.10 (64-bit) as a VirtualBox guest on a Win7 64-bit host. When I plug in my Android Epic4g (Galaxy S) both the host and guest see the device properly, however lsusb does not. When I run dmesg I get the following: [ 361.664219] usb 1-2: new full speed USB device number 79 using ohci_hcd [ 362.428798] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 363.313782] hub 1-0:1.0: unable to enumerate USB device on port 2 I get the same type of dmesg message with the USB 2.0 (ECHI) Controller enabled and disabled for the guest OS. I'm stuck with this one, can anyone help?

  Read the article

• package update in ubuntu on vitual box

  - by Ayusman

  while following one of the tutorials I needed to install a curl package. Here are my system configuration: Virtualbox 4.1 on Windows 7 64 bit. I have installed ubuntu 12.04 on the virtual box. When I try the following: sudo apt-get install curl I see the following errors: [sudo] password for userMe: Reading package lists... Done Building dependency tree Reading state information... Done Package curl is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'curl' has no installation candidate userMe@userMe-ubuntu:~$ When I try the same on a direct installation of ubuntu on a laptop (not a virtual machine) there is no problem. I am assuming this may be because of network settings. Please note that my work PC is in a corporate network and uses auto proxy settings (using a .pac file) for internet access etc. Any help will be appreciated.

  Read the article

• SSH access failure from Ubuntu 12.04 LTS VM

  - by begueradj

  I installed 2 VMs on VirtualBox. VM 1: Windows XP with FreeSSHd and PuTTY installed.IP address: 10.0.0.2 VM 2: Ubuntu 12.04 LTS Server Edition with OpenSSH installed.IP address: 10.0.0.3 From VM 1, I run PuTTY with the IP address of VM 2 (10.0.0.3) and port number 22. I get prompted to input the username and password of VM 2 and everything works fine.From VM 2, I run on the terminal (Ubuntu): ssh [email protected] , I get prompted to enter the password of VM 1. I do so, but it says my password is invalid (while it is the correct one). I even deactived the Firewall on VM 1, but still the problem is here: my password is not accepted from VM 2. Is this due to some settings maybe I must do on VM 1 (Windows XP) so as I can access it with SSH ? Maybe it has something to do with the Firewall of Windows XP ?Important information: ping 10.0.0.2 from VM 1 and ping 10.0.0.3 from VM 2 are working successfully.

  Read the article

• How to list Windows shares from terminal?

  - by Zabba

  Here is a simple scenario I have: Windows 7 is sharing a folder (D:\Projects). Full Control permissions have been given to the folder. In Ubuntu 10.10, I can see the Windows shares from Places - Network menu. I can create a folder in the shared Projects folder from Nautilus How do I ls those same folders (displayed in Nautilus) from the terminal? (mount and ls /mnt do not list those Windows shares) Ps. Details on what I am doing: Using Ubuntu as a "headless" VM using VirtualBox. Accessing Ubuntu via PuTTY Ability to give complete access to the Ubuntu VM for the Windows shared folder

  Read the article

• Can I virtualize a pre-installed Windows 7?

  - by SpashHit

  I am considering buying a new computer with Windows 7 (64-bit) pre-installed. Would it be possible to install Ubuntu (preferably 64-bit) dual-boot on such a machine, and then, using VirtualBox / VMWare, etc. under Ubuntu, make a virtual machine that "points to" the existing Windows 7 OS (without making a copy of it)? Just to be clear... at the end of this process: I would have a machine that dual-booted both Windows 7 (64-bit) and Ubuntu (64-bit). If I choose to boot Ubuntu, I would then have the possibility of running a visualization of Windows 7 within Ubuntu. There would only be 1 copy of Windows 7 on the hard disk.

  Read the article

• Broken Splash boot screen with significant performance and freezing issues

  - by Ghost_ITMachine

  okay heres the story and yes this is important becauses its what was the last thing i did before this madness watched a youtube video which ive now flagged and reported but he basically instructed us to su virtualbox into the system i dont know what i did all i did was follow directions now im plagued with no ubuntu purple boot screen it goes straight to a black screen filled with letters and im experiencing more lag and freezing than i ever have before this is not from an upgrade ive had 14.04 for about a month before this happened im at a loss for what my routes are it was all i could do to remove the superblocks just to get back into my desktop please help

  Read the article

• Ubuntu Server - Virtual Box?

  - by user186144

  So I got VirtualBox just for Ubuntu Server, I'm currently Running Ubuntu 12.04 as my main OS. But when I got everything set up in Ubuntu Server 12.04, including my ports forwarded and a test Minecraft server up... I realized that nobody could join my public IP I sent out, not even me! I can connect to the ipv4 address. It acts like I didn't forward my ports. But I forwarded 25565 to Input and Output and they're both TCP and UDP. Is this just a virtual box issue or am I doing something wrong? * Using Eth0 wired connection

  Read the article

• Linux e1000e (Intel networking driver) problems galore, where do I start?

  - by Evan Carroll

  I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

  Read the article

• How to configure networking on an appliance such that it can plug and play on any corporate network?

  - by Joshua Lim

  I had a chance to configure a Moxa NPort device server appliance on my client's network, it was very easy to do so, done in just 2 minutes. Here's what I did:- The Moxa device server had a preset IP address of 192.168.127.254 and subnet mask 255.255.255.0 - http://www.moxa.com/doc/manual/nport/5400/NPort_5400_Series_Users_Manual_v4.pdf Moxa provides a Windows software which I used to "scan" for the device server. It worked like magic! The software returns a list of device servers found. Each device server is identified by MAC address, and by selecting the device server using the software, I can reset the default IP address and subnet mask of that device server! In comparison, during an earlier project, I spent 2 hours trying to get KVM to work for a Windows 7 embedded appliance I'm trying to install in my client's network - http://superuser.com/questions/380305/how-to-configure-windows-7-professional-appliance-pc-on-my-clients-network-usin Prior to that, I have already tried pre-configuring the IP address and subnet mask to the one which my client provided, yet the appliance still can't connect to the client's network! I've also tried cross cable, didn't work either. After KVM worked, I discovered that the network settings were "lost" after I plug the machine into the client's network. Now my question is what can I do to setup my Windows 7 embedded appliance so that it can connect to any network like that the Moxa device server? I tried experimenting this on my network using a Windows machine configured to an IP address of 192.168.127.254 and subnet mask 255.255.255.0, but it doesn't connect to my network that uses 192.168.0.*. :( EDIT: I would like to point out that the Moxa Windows configuration software seems to be able to connect to any Moxa device connected to the network even if it is on a different subnet, as long as the network adapter shows "connected". This is important because the Moxa device has no VGSM port or interface to configure the IP address.

  Read the article

• Hyper-V networking....still not sure which way to go??

  - by CZhale

  We have our Hyper-V server up and running (Windows 2008 ENT SP2) and started to create some of our VMs. The server has 4 total nics. 2 onboard Broadcom 1gb nic cards and a pci dual port Intel Pro cards 1gb. Right now, I have setup 1 broadcom nic to be the hyper-v host nic, and setup the other broadcom nic for the VMs. We are not using the Intel Nics....should we be thinking about teaming?Link Aggregation?? I just want to achieve the best possible setup for the network, but have read many things for and against teaming the nics?? Thoughts?

  Read the article

• Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

  - by ale

  I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

  Read the article

• Networking conflict - What is the most common default computer name?

  - by John

  I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "Dell(omitted)" logged on.) I've never been at a wifi spot that you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (I read via Google that Redhat linux default to "localhost" and Toshiba laptops default to "Toshiba.") Somebody probably keeps statistics. (I was referred here from serverfault.com) Thanks

  Read the article

• Networking Mac OS X 10.6 and Vista via ethernet?

  - by Moshe

  How can I make Vista home premium access OS X hard drive? and the other way around? I'd like to transfer files via direct ethernet. Plugging in an ethernet cable makes both computers recognize a network, but not the other device. Each firewall is turned off, but no luck. Edit: I don't see Windows Sharing in the Service Column.

  Read the article

• linux networking: how to redirect incoming connections from old server to new server?

  - by aliz

  hi I'm in the process of moving my old server to a new server, but i will keep the old server running for database replication and load balancing, etc. each server has a separate internet connection with a static ip, and they are connected through a local Ethernet connection. I've got Ubuntu 8.04 32-bit running on old server and Debian 6.0 64-bit on new one. shorewall firewall is installed on both servers. there are some outdoor devices which are periodically sending data to port 43597 for old server IP address. I can run multiple instances of the network service which is responsible for receiving data from devices on a server but on different ports. here's the question: how can I run the service on new server and have connections coming to old server redirected to it, and new devices can still connect to new server's IP address preferably on the same port and same service? until all devices get updated to send to new server. I've tried a shorewall DNAT rule, but seems like new server's default route should be changed to ethernet connection, which breaks other things. I also found about redir utility, but still haven't tried it. is there any best practice or simple solution for such a scenario, i'm not aware of? thanks in advance.

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >