Search Results

Search found 15875 results on 635 pages for 'border box'.

Page 511/635 | < Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >

• Hardware freeze during disk activity

  - by Thomi

  I built myself a linux-based NAS. It has several drives of various sizes and ages in an LVM configuration, with 800GB or so of data. The data is served using a simple samba server. This was working flawlessly, but after physically moving it, it has developed a strange fault: Whenever I do something on the server to cause disk activity, the entire machine freezes hard. This has the effect of killing any open network connections to the box, and generally making it useless. If I leave the machine for a few minutes it seems to come right again, but obviously this isn't really a solution. There are no error or warning messages in syslog, or the kernel logs. If I power the machine on, and leave it, it runs for several days without locking up. After that time I stopped testing. It doesn't freeze instantly - obviously it doesn't freeze while booting, and I can normally log in via SSH and start poking around in a few log files for a couple of minutes before it dies. My question is: What diagnostic tests can I run to determine the casuse?

  Read the article

• Apache2 Re-Routing from Domain Name to Internal IP Address

  - by Richard Grey

  The problem that I am having, is that when someone goes to my domain name example.co.uk, for some reason, apache seems to be re-routing the request to the internal IP address of the server, i.e. 192.168.0.52 My Apache2 default sites enabled file is as follows: ServerAdmin [email protected] ServerName trusteeguard.co.uk ServerAlias www.trusteeguard.co.uk DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride All Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/trusteeguard-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/trusteeguard-access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride All Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> This is an Ubuntu box if that is any help ;)

  Read the article

• debugging connection to mysql from python script using MySQLdb

  - by timpone

  I am a python newbie and have a python 2.5 script that is using MySQLdb to connect on OS X 10.5.8. I haven't been able to succesfully connect to the database of interest with this. However, I am able to connect using php's mysqli and also via the mysql cli interface. I get the error: File "build/bdist.macosx-10.5-i386/egg/MySQLdb/connections.py", line 188, in __init__ _mysql_exceptions.OperationalError: (1045, "Access denied for user 'arc_development'@'localhost' (using password: YES)") On my linux box which has the same mysql perms, the script works fine logging in. On my OS X laptop, I am able to create a database named test_python which bypasses mysql authentication scheme. This makes me think that issues like 32bit / 64bit incompatabilities aren't occuring. If I turn on the query log, I get access denied: 100610 20:56:55 4 Connect Access denied for user 'arc_development'@'localhost' (using password: YES) I'm a little bit at a loss to what to do next. Is there any way I can specify in the general log or binary log to get the actual password set on the connection string? How about writing out from connections.py file the value (although not sure how I'd do that)? thanks

  Read the article

• dpkg broken while upgrading Debian Etch to Lenny

  - by artvolk

  Good day! While trying to recover a box to lenny it seems I've broken things. It upgrades libc and glib after that dpkg seems to be broken. I can run apt-get, but it gets segmentation fault from dpkg: # apt-get -f install Reading package lists... Done Building dependency tree... Done 0 upgraded, 0 newly installed, 0 to remove and 316 not upgraded. 9 not fully installed or removed. Need to get 0B of archives. After unpacking 0B of additional disk space will be used. /bin/sh: line 1: 4606 Segmentation fault /usr/sbin/dpkg-preconfigure --apt E: Sub-process /usr/bin/dpkg received a segmentation fault. I can login via SSH but even ls is not working: # ls Segmentation fault Is there anything I can do remotelly via SSH? # ldd /bin/ls linux-gate.so.1 => (0xffffe000) librt.so.1 => /lib/tls/i686/cmov/librt.so.1 (0xb7fc8000) libacl.so.1 => /lib/libacl.so.1 (0xb7fc2000) libselinux.so.1 => /lib/libselinux.so.1 (0xb7fac000) libc.so.6 => /lib/i686/cmov/libc.so.6 (0xb7e51000) libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0 (0xb7e3f000) /lib/ld-linux.so.2 (0xb7fd8000) libattr.so.1 => /lib/libattr.so.1 (0xb7e3b000) libdl.so.2 => /lib/i686/cmov/libdl.so.2 (0xb7e37000) libsepol.so.1 => /lib/libsepol.so.1 (0xb7df6000) It seems I've temporary fixed it with: # touch /etc/ld.so.nohwcap From here: http://saintaardvarkthecarpeted.com/blog/archive/2005/08/_etc_ld_so_nohwcap.html

  Read the article

• memory tuning with rails/unicorn running on ubuntu

  - by user970193

  I am running unicorn on Ubuntu 11, Rails 3.0, and Ruby 1.8.7. It is an 8 core ec2 box, and I am running 15 workers. CPU never seems to get pinned, and I seem to be handling requests pretty nicely. My question concerns memory usage, and what concerns I should have with what I am seeing. (if any) Here is the scenario: Under constant load (about 15 reqs/sec coming in from nginx), over the course of an hour, each server in the 3 server cluster loses about 100MB / hour. This is a linear slope for about 6 hours, then it appears to level out, but still maybe appear to lose about 10MB/hour. If I drop my page caches using the linux command echo 1 /proc/sys/vm/drop_caches, the available free memory shoots back up to what it was when I started the unicorns, and the memory loss pattern begins again over the hours. Before: total used free shared buffers cached Mem: 7130244 5005376 2124868 0 113628 422856 -/+ buffers/cache: 4468892 2661352 Swap: 33554428 0 33554428 After: total used free shared buffers cached Mem: 7130244 4467144 2663100 0 228 11172 -/+ buffers/cache: 4455744 2674500 Swap: 33554428 0 33554428 My Ruby code does use memoizations and I'm assuming Ruby/Rails/Unicorn is keeping its own caches... what I'm wondering is should I be worried about this behaviour? FWIW, my Unicorn config: worker_processes 15 listen "#{CAPISTRANO_ROOT}/shared/pids/unicorn_socket", :backlog = 1024 listen 8080, :tcp_nopush = true timeout 180 pid "#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid" GC.respond_to?(:copy_on_write_friendly=) and GC.copy_on_write_friendly = true before_fork do |server, worker| STDERR.puts "XXXXXXXXXXXXXXXXXXX BEFORE FORK" print_gemfile_location defined?(ActiveRecord::Base) and ActiveRecord::Base.connection.disconnect! defined?(Resque) and Resque.redis.client.disconnect old_pid = "#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid.oldbin" if File.exists?(old_pid) && server.pid != old_pid begin Process.kill("QUIT", File.read(old_pid).to_i) rescue Errno::ENOENT, Errno::ESRCH # already killed end end File.open("#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid.ok", "w"){|f| f.print($$.to_s)} end after_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.establish_connection defined?(Resque) and Resque.redis.client.connect end Is there a need to experiment enforcing more stringent garbage collection using OobGC (http://unicorn.bogomips.org/Unicorn/OobGC.html)? Or is this just normal behaviour, and when/as the system needs more memory, it will empty the caches by itself, without me manually running that cache command? Basically, is this normal, expected behaviour? tia

  Read the article

• Need advise for choosing software\hardware for virtualization.

  - by Anatoly

  Currently we have these servers : Windows SBS 2003 premium on IBM X266 double Xeon F43, 2GB ram. DC, exchange (70 users), Mssql. Windows 2003 R2 32bit on IBM x3400 with double XEON E5310 and 4GB ram. Terminal server (40+ users), ERP application based on uniPaaS platform from Magicsoftware, and Pervasive sql. Ubuntu 8.04 (simple pc box) with squid proxy, GLPI system and PHPBB3 forum for internal use. Recently number of concurrent users on Terminal server passed 40 users in rush hours and it gets stuck frequently. Therefore we need an upgrade. I think about transfer all physical servers to virtual servers based on cluster of 2 physical servers for reducing downtime. I think we will grow till 50-60 concurrent terminal users in rush hours. I also plan to virtualize 10-15 Win XP/7 workstation (office,ERP etc), and there is a little probability for Asterisk\Hylafax for 100 users (if it possible on same VM). Also we need NAS storage for 2-3TB. What hardware upgrade/purchase we need for complete this task? Which VM solution is preferable VmWare or Hyper-V? What backup software should we choose? Acronis or something another? Thank you in advance.

  Read the article

• Setting up httpd-vhosts.conf for multiple virtual hosts

  - by Chris Sobolewski

  I have a simple test setup using xampp at home, and I am getting really weird behavior when I attempt to set up multiple virtual hosts on this box. Here is my vhosts file: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName foo DocumentRoot "D:\wamp\xampp\htdocs\foo" ErrorLog logs/foo-error_log CustomLog logs/foo-access_log common <Directory "D:\wamp\xampp\htdocs\foo"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName bar DocumentRoot "D:\wamp\xampp\htdocs\bar" ErrorLog logs/bar-error_log CustomLog logs/bar-access_log common <Directory "D:\wamp\xampp\htdocs\bar"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> When I attempt to run visit the first site, it works as expected. When I attempt to run the second site, I get a weird hybrid mishmash of both sites. It's the weirdest thing.

  Read the article

• PHP 5.3.2 Upgrade on Windows

  - by mcondiff

  I have a development box running Windows XP, Apache 2.2.15 Mysql and PHP 5.2.6 About a month ago I updated the Apache to the latest version and it went swimmingly. I am not having the same success with upgrading PHP to the latest version. I backed up my PHP directory and then deleted it. Used the Windows Installer for PHP 5.3.2, installed as an Apache 2.2.X module. I can get "Hello World" and phpinfo() to come up but cannot get mysql to connect. I have the extension un-commented in the php.ini and shouldn't really have to touch the Apache httpd.conf file since I didn't change the directory of PHP. Not sure what I'm doing wrong here. I have to get this right and then upgrade the Live Server too so I want to get this down pat. I've tried to use installation guides on the web with no luck. Any info pertaining to this problem would be great. I'm also afraid that the other PHP modules may not load but cannot really tell anything past mysql not working.

  Read the article

• Server 2008 Print Redirection is failing but only on 16Bit apps

  - by ian

  the main programmer for SoEasyAccounting and we are installing to Server 2008 Standard service pack 1. We install to 2003 with no problems. Important to understand that the print failure only happens in certain circumstances: Note: We use a standard Windows printer selection box to choose the printer Terms used Superbase = a program language that uses ntvdm.exe (Windows process hosting 16 bit apps) Local Printer = printing to a driver loaded onto the Server 2008 Redirect Printer = printing to a automatically established remote printer through an RDP connection Printing Scenarios Server 2008 - 1: Print from notepad to a Redirected Printer = works Server 2008 - 2: Print from Superbase to a Local Printer = works Server 2008 - 3: Print from Superbase to a Redirected Printer = fail Server 2003 - 4: Print from Superbase to a Redirected Printer = works Results The print causes a message in the drivers print queue of Local Downlevel Document, no print though and Superbase recognises that the "Print command failed". Eventvwr has no related issues to the print fail Any help greatly appreciated. So far 2 days spent trying to resolve and here goes my weekend :( unless someone has an idea :) Things I have Tried i. Switching on/off Easy print ii. Loading copy of redirected driver on server

  Read the article

• How can I pause console output in rxvt?

  - by Javid Jamae

  I'm running rxvt in Cygwin on a Windows box. This is how I invoke it: rxvt -sr -sl 2500 -sb -geometry 90x30 -tn rxvt -fn "Lucida Console-14" -e /usr/bin/bash --login -i Anyone know how to pause the console output in rxvt? I can use Ctrl-S / Ctrl-Q to pause / un-pause, but this won't work if a script is already running and spewing output to stdout. Highlighting the terminal window with the mouse doesn't seem to work like with other consoles such as the standard Cygwin console, or the Windows command prompt console. Some sort of scroll lock would be nice, but I can't seem to find any way to do this. I know I could just pipe my output to a file, but I want a way to pause the output for something that I didn't expect to explode with console output. Basically I want to scroll back while its running without it constantly moving me to the bottom of the output buffer as it updates more data to stdout. I don't particularly care if the solution given actually pauses the script (like when you highlight the mouse in the Windows Command window), or just scroll locks and let's me scroll while its still running the underlying script, though I'd like to know how to do both if its possible.

  Read the article

• Is it possible for a faulty processor to cause audio static/noise?

  - by Tom

  I have a Core 2 Extreme processor I received from a friend and have set up an XBMC box using it. However, I constantly get audio static whenever playing any music or videos. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 I have tried replacing everything short of the case and the processor, including cables, audio interfaces, operating systems, ram, etc, leading me to think it might be either the case shorting out the motherboards I have tried or a faulty processor. Is it possible for a faulty processor to cause audio static/noise? Any feedback would be appreciated. Edit - Here's a list of things I have tried: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Switching Power Cable Plugging in through surge protector Plugging into different outlet on separate circuit

  Read the article

• Problems with 5.1 digital out on Ubuntu 12.04

  - by user895319

  I've recently bought a new PC, installed Ubuntu and am now unable to get 5.1 digital sound working. Simple analogue stereo works fine on both the front and rear connectors. On my old box I connected the coax connection from my soundcard to my surround sound amplifier, set Settings-Sound to "Digital Stereo Duplex" and it worked. My old soundcard doesn't fit in my new machine so I'm using the built-in sound hardware. I'm connecting the combination output socket on the back of the PC via the same cable to my surround amp as before. The MB is an MSI Global H61M-P31 with an RealTek ALC887 sound chip. When I go to Settings-Sound I only see "Headphone Built-in Audio" and "Analogue Output Built-in Audio" - no digitial options. The output from aplay -l is: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC887-VD Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Hardware device with all software conversions While googling for ALC887 I've seen some references to "ALC887 -VD Analog" and some to "ALC887 -VD Digital". Does anyone know if I need to force it to chance mode somehow? It's worth mentioning that when I set the output to 5.1 digital surround in Windows 7 on the same machine I still don't get any sound so it's not a unique Linux problem. Thanks for any help.

  Read the article

• Which CPU for XEN - LAMP testbed - Budget

  - by deploymonkey

  Dear serverfault knowledgeables, im in a decision dilemma right now, which I can't resolve due to lack of hands on experience. I need to build a testbed for basically virtualizing a LAMP application (os'ses not yet decided) including server side calculations. I'll opt for XEN since it seems better supported by cloud hosters at the moment. The hardware is for a proof of concept for a startup doing saas and might be used for closed live alpha/beta later on. After testing, the testbed might be a) deployed as a colocated white box server b) used as workstation Single socket is enough. We want to have ECC memory for reliability, this excludes most of the consumer line at intel. If intel CPU, then threaded cpu (HT) is preferred have at least 16 gig ram If justified by price and reliability is not too bad, a high quality desktop MB instead of a server MB would be worth a try It came down to the opteron 6128 vs. the xeon 5620 for me after a lot of research, but I don't necessarily have to be right. Which CPU is preferrable, concerning TCO (MB price, power requirements 24/7...) , Opteron 6128 or Xeon 5620? Which one offers better performance in real world applications? (Do You have any other suggestions I probably overlooked?) Thank You for Your consideration

  Read the article

• Apache Probes -- what are they after?

  - by Chris_K

  The past few weeks I've been seeing more and more of these probes each day. I'd like to figure out what vulnerability they're looking for but haven't been able to turn anything up with a web search. Here's a sample of what I get in my morning Logwatch emails: A total of XX possible successful probes were detected (the following URLs contain strings that match one or more of a listing of strings that indicate a possible exploit): /MyBlog/?option=com_myblog&Itemid=12&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 /index2.php?option=com_myblog&item=12&task=../../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 /?option=com_myblog&Itemid=12&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 301 /index2.php?option=com_myblog&item=12&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 //index2.php?option=com_myblog&Itemid=1&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 This is coming from a current CentOS 5.4 / Apache 2 box with all updates. I've manually tried entering a few in to see what they get, but those all appear to just return the site's home page. This server is just hosting a few Joomla! sites... but this doesn't seem to be targeting Joomla (as far as I can tell). Anyone know what they're probing for? I just want to make sure whatever it is I've got it covered (or not installed). The escalation of these entries has me a bit concerned.

  Read the article

• LYNC 2010 Dial-In in Meeting DTMF issue

  - by user140116

  We are facing an issue in the LYNC2010 dial-in to a meeting. We redirect an Asterisk number to LYNC, whitch connects successfully in the dial-in plan of LYNC. After calling from external network to the given number, we hear LYNC aswering and prompting us to enter the PIN and afterwards the hash key. I should mention that all other dials to LYNC from Asterisk and vise versa are routed successfully. Also all DTMF we send to Asterisk from the phone (IVR, Extension, PIN etc) are routed also fine Afterwards we press the appropriate pin folowed by the hash keyand we get 'Sorry I can't find meeting with that number' Some pros mentioned that it might be dtmfmode=RFC2833 or dtmfmode=auto in Asterisk (All checked and tried). Some pros mentioned, that there is a problem in geeral in LYNC and DTMF (even with Cisco Call Manager). Some other pros mentioned that chack box 'Enable refer support' in Voice Routinh\Trunk Configuration' in LYNC has to be unchecked (Also tested). The problem stil remains and there is no way to enter a meeting room by dial-in. ANY idea would be appreciated!!!!!!!!

  Read the article

• CLOSE_WAIT sockets burst - perhaps because of iptables settings?

  - by Fabrizio Giudici

  I have an Ubuntu 12.04 server virtual box where basically the installed software and configuration are the default ones, plus the installation of a jetty 6 server which servers a few websites. To keep things simple I didn't install apache httpd and used iptables for exposing jetty (which runs on the 8080 port) to the port 80. These are the results of /sbin/iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere localhost tcp dpt:http redir ports 8080 REDIRECT tcp -- anywhere Ubuntu-1104-natty-64-minimal tcp dpt:http redir ports 8080 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere localhost tcp dpt:http redir ports 8080 REDIRECT tcp -- anywhere Ubuntu-1104-natty-64-minimal tcp dpt:http redir ports 8080 Chain POSTROUTING (policy ACCEPT) target prot opt source destination I must confess I have a shallow comprehension of how iptables works, in particular for the different kind of chains. This thing works, but sometimes I have an explosion of sockets that stay permanently in CLOSE_WAIT state. I know about what this state means, but since I didn't write the code that manages servlets (they are handled by jetty) I can't fix the problem by patching my code. Eventually the amount of CLOSE_WAIT sockets builds up and makes the server not responsive, so I have to restart jetty. I've looked around for similar problems wth CLOSE_WAIT, and only found cases related to the programmer's code, or problems with Tomcat, not Jetty. I was wondering whether they could be related to a partially broken iptables configuration (the alternative is a bug in Jetty 6, but I first want to exclude other possible causes). Thanks.

  Read the article

• Windows 7 BSOD when I walk away from the computer

  - by bobobobo

  I have a really weird experience with this new AM3 box I set up. Everything seems fine at first. But now I get frequent (daily) BSOD's, mostly when I walk away from the computer for more than 5 minutes (when the computer is idle). The BSOD's as shown by BlueScreenView almost always have to do with ntoskrnl.exe, and they'll do with really normal sounding operations, like SYSTEM_SERVICE_EXCEPTION, NTFS_FILE_SYSTEM, DRIVER_IRQL_NOT_LESS_OR_EQUAL, KMODE_EXCEPTION_NOT_HANDLED, BAD_POOL_HEADER - You name it. These are basically them, and they repeat after that, just random order. Its not like one is more consistently the problem than the other. I have Windows update ON and I let it do its updates everytime it wants to. I turned windows indexing service off, but it seems Windows 7 does a lot of background processing when I'm away - I'll come into the room and the fan will be going nuts (I'm pretty sure this isn't because the computer flies into a panic whenever I leave). I tried finding updates for my ASUS, and really there isn't much to install (except some new driver firmware). I'm going to install that to see if it helps, but what else could it be? Is it possible its a hardware issue with the board? Or is every Windows 7 user experiencing daily BSOD these days that I don't know about?

  Read the article

• Outlook Web Access and Rules

  - by Chris_K

  One of my clients would prefer that I have an email address in their domain. They run SBS 2k8 so I just monitor my email from them (and their clients) via Outlook Web Access. No POP or IMAP access, only OWA. No VPN access either, so no "real" Outlook. Just OWA. I figured I'd build an outlook rule to forward mail from that account to an account that I monitor -- that way I won't need to keep IE open all the time to monitor email. However, I just can't seem to get the dang rule to work and am hoping someone here can give me a nudge or pointer. From OWA, I click on Options - Rules and edit my current rule that kinda works. The rule is supposed to forward the email sent to me and then move it to a folder. It does move it to a folder... just never seems to forward it. The rule looks like this: Apply this rule after the message arrives where my name is in the To box redirect it to [email protected] and move it to the Forwarded to MyEmail folder except with "ALERT" in the subject As I mentioned, mail does get moved, just never redirected. I've tried "Forward" and "redirect" actions with the same results. Any suggestions?

  Read the article

• Configuring network route between two routers on home network

  - by Paul

  I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

  Read the article

• postfix not sending domain mail to mx

  - by orlandoresorts

  I'm trying to get postfix to forward email to my domain which is hosted by gmail. As I don't have any users on my server nor do I want to. Here's how I have things set up.. LEt's say you and I have a domain called mcdonalds.com the registrar has mcdonalds.com MX records pointing to gmail. (everything works for like a year) Now we set up a server to host a website. Then we create a mail account called [email protected] and send mail locally from the server using roundcube. This works. We can send mail to cnn.com we can send mail to serverfault.com we can email any/everyone. BUT we cannot send mail to our own domain mcdonalds.com So I cannot email [email protected] I cannot email [email protected] I cannot email [email protected] It gives the error: SMTP Error (450): Failed to add recipient "[email protected]" (4.1.1 : Recipient address rejected: User unknown in virtual mailbox table). I'm guessing because it is looking at the local server to find the mailbox and it doesn't exist. So how to I tell the server for any mail going to mcdonalds.com for [email protected] to send to my external mail server and NOT to lookup on the local www box we set up with zpanel. Any ideas?

  Read the article

• Default /server-status location not inheriting in Apache

  - by rmalayter

  I'm having a problem getting /server-status to work Apache 2.2.14 on Ubuntu Server 10.04.1. The default symlinks for status.load and status.conf are present in /etc/apache2/mods-enabled. The status.conf does include the location /server-status and appropriate allow/deny directives. However, the only vhost I have in sites-enabled looks like this. The idea is to proxy anything with a Tomcat URL to a cluster of tomcats, and anything else to an IIS box. However, this seems to result in requests to /server-status being sent to IIS. Copying the /server-status in explicitly to the Vhost configuration doesn't seem to help, no matter what order I use. Is it possible to include /server-status do this within a vhost configuration that has a "default" proxy rule?: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www Header add Set-Cookie "ROUTEID=.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED <Proxy balancer://tomcatCluster> BalancerMember ajp://qa-app1:8009 route=1 BalancerMember ajp://qa-app2:8009 route=2 ProxySet stickysession=ROUTEID </Proxy> <ProxyMatch "^/(mytomcatappA|mytomcatappB)/(.*)" > ProxyPassMatch balancer://tomcatCluster/$1/$2 </ProxyMatch> #proxy anything that's not a tomcat URL to IIS on port 80 <Proxy /> ProxyPass http://qa-web1/ </Proxy>

  Read the article

• Two different subwoofers aren't working on my machine or my phone

  - by Philluminati

  I have speakers that come with my computer. Two small desktop speakers and a subwoofer with a base volume control on the back. It's worked for years. I was listening to Spotify on my speakers as loud they would possibly go and with the base turned up to max and suddenly the subwoofer stopped working. I've plugged the speakers into my Android HTC Desire Z handset and again, the desktop speakers play music but the subwoofer doesn't (even after fiddling with the volume control). So I figured I'd broken it. I went to Amazon and bought a replacement one. I bought this one: http://www.amazon.co.uk/dp/B002N46YD8/ref=pe_217191_31005151_dp_1 but it doesn't work either, on either my desktop nor my Android phone. I had a play with alsamixer and the LFE and center controls are switched on and the speakers are okay... but still no base. Am I unlucky enough to bought a new subwoofer which is already broken out of the box or is there something else which is wrong and I could look into please? Are there any other tests which I could perform to see if the problem is me or not?

  Read the article

• How to manage multiple email addresses on multiple domains in Exchange

  - by CAD bloke

  Using Hosted Exchange Server, mostly because I use an iPhone, webmail & Outlook on 2 laptops. I want to keep everything consistent and unfragmented. Also, I want push notifications. I have 2 domains, a professional one & a personal one. Each domain has about 5 (give or take) email addresses I use for various purposes. Each domain also has a few parked domains (.net, .org, .info) aliased to the .com domain. I would like to keep emails from the 2 domains separated. Do I need an extra mail box, meaning extra expense or can I create another Exchange user on the same mailbox and create an extra account in Outlook? In either case I will have to wait for iOS4 on the iPhone to manage 2 Exchange accounts. Or am I better off just using a set of rules and folders? The aliased domains are another joy to behold entirely. It looks like I will have to add each email address variant individually. Alternatively, I reckon I may just leave the aliased domains at the pop3 host and let Outlook gather those as edge-cases. Surely I can't be the only one making my life this difficult. Anyone out there done this? From the left field - is this (much) easier in gMail? I'm not committed to Exchange (yet). Previously I used Outlook as a pop3 client with a set of filters to direct incoming traffic to folders. This worked with the aliased domains because my host directed all the aliased TLDs to the same mailbox.

  Read the article

• Not able to access external Hard disk

  - by Jash Jacob

  I have a 1TB External Hard drive which I'm currently not able to access. When I open the External drive in Finder, It shows it's empty. When I use the option to "Get Info", I get the dialog box stating it has about 300GB Free. Tried to get into the External Drive using Terminal, I had no luck. Checking in Disk Utility, It showed that I have many number of files but ZERO folder. I tried to "repair disk", in the process the external Drive got unmounted in between the process. I checked this drive on Windows. I was able to open almost all the folders but I wasn't able to copy anything onto the external drive. One folder caused my windows computer to hang, So i connected the drive back onto my MacBook Pro and tried to access the drive through terminal (this time it worked!) and then I tried to delete the folder with rm command, I got an "input/output error" What should i do to recover the files in that folder? How can i access my external drive on my mac

  Read the article

• Unable to access site over HTTPS using self signed certificate

  - by James

  I am developing a REST API which I want to secure with SSL/TLS. I have implemented a large part of the API which I have tested over HTTP, however, I am now at the stage where I want to switch it over to use HTTPS. At the moment the API is hosted on a Windows XP professional SP2 box running IIS 5.1 (development environment only) and I used the SelfSSL.exe tool from the IIS 6.0 Resource Kit Tools to generate a server certificate. I then configured my API to use this certificate which all appeared to work fine as I attempted to connect to my API using HTTP and I get a 403 response saying "... must be accessed over a secure channel...". However, the problem is when I attempt to access the same the API over HTTPS it just appears to hang! As this is a development environment at the moment I don't have a domain name (just a static IP address) and the API is running on port 81. Also (incase it matters) the API is the default site (I replaced it). Any ideas why I can't connect using HTTPS?

  Read the article

< Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >