Search Results

Search found 18096 results on 724 pages for 'let'.

Page 512/724 | < Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

• Windows 8 keeps signing out

  - by bill weaver

  Ran into a strange problem with Windows 8 Pro. Last night i installed Windows 8 Pro as an upgrade on a Sony Vaio laptop that had Windows 7 Pro on it. The install seemed to go okay. Then once installed, live tiles seem to work, native/Metro apps will start okay, but pretty soon after going into an app or settings, the screen flashes a few times and we're back to the lock screen. Signing in appears to do a full login. I've tried this with a local account and with a live.com account. This is someone else's laptop, so we decided to let it breathe, in case the install was still settling in. Well, they say today it's doing the same thing. Open the music app, and within a minute it's back to signon/lock screen. However, they can go to the actual Desktop and run Zune to play music, and it seems happy. In the past, i've installed retail Windows 8 Pro clean on a homebrew system, as an upgrade on a Dell laptop with a zillion apps and drivers, neither with any problems. Also, i've had the consumer preview and release candidate installed as well, no problems. Any ideas on what's going on here?

  Read the article

• VMware NAS/iSCSI recommendations - smallish organization

  - by Bubnoff

  I have two VMware servers - ESX + ESXi. Two backup NAS boxes. The current NAS boxes are low-cost and unsuitable for running VMs from. Support NFS only. Slow. My plan is to have a dedicated iSCSI/NAS for storing and running VMs. Two additional low-cost boxes for backup. I'm looking for advice regarding 2 things really: Recommendations as far as VMware architecture/design for a smaller organization. Less than 20 Virtual Machines. 2 servers + 2 x 1.5 terabyte backup NAS boxes. A good NAS/iSCSI box with your recommendation on RAID config ...I would go with 6 or better. I'm trying to design an installation that is both fast and reliable/redundant. If you have any experiences to share or your current configuration including network design ( switches, fiber ...etc ), I will be enormously thankful. I'm not married to this idea, so if you have a design not using iSCSI NAS boxes ...let er rip. Cost? Can we stay around $5,000 ( on top of already stated components )? Links to info are welcome also. Thanks for reading! Bubnoff

  Read the article

• What is the peak theoretical WiFi G user density? [closed]

  - by Bigbio2002

  I've seen a few WiFi capacity planning questions, and this one is related, but hopefully different enough not to be closed. Also, this is related specifically to 802.11g, but a similar question could be made for N. In order to squeeze more WiFi users into a space, the transmit power on the APs need to be reduced and the APs squeezed closer together. My question is, how far can you practically take this before the network becomes unusable? There will come a point where the transmit power is so weak that nobody will actually be able to pick up a connection, or be constantly roaming to/from APs spaced a few feet apart as they walk around. There are also only 3 available channels to use as well, which is a factor to consider. After determining the peak AP density, then multiply by users-per-AP, which should be easier to find out. After factoring all of this in and running some back-of-the-envelope calculations, I'd like to be able to get a figure of "XX users per 10ft^2" or something. This can be considered the physical limit of WiFi, and will keep people from asking about getting 3,000 people in a ballroom conference on WiFi. Can anyone with WiFi experience chime in, or better yet, provide some calculations for a more accurate figure? Assumptions: Let's assume an ideal environment with no reflection (think of a big, square, open room, with the APs spaced out on a plane), APs are placed on the ceiling so humans won't absorb the waves, and the only interference are from the APs themselves and the devices. As for what devices specifically, that's irrelevant for the first point of the question (AP density, so only channel and transmit power should matter). User experience: Wikipedia states that Wireless G has about 22Mbps maximum effective throughput, or about 2.75MB/s. For the purpose of this question, anything below 100KB/s per user can be deemed to be a poor user experience. As for roaming, I'll assume the user is standing in the same place, so hopefully that will be a non-issue.

  Read the article

• Set proper rights for sshfs mountpoint so it can be shared with samba

  - by CS01

  I have a domain hoster that provides access via SSH. My platforms are: Gentoo 2.6.36-r5 Windows (XP/Vista/7) I work on my Windows, I use Gentoo to do all the magic Windows can't do. Therefore I use sshfs to mount the remote public directory for my domain to /mnt/mydomain.com. Authentication is done via keys, so lazy me don't have to type in my password every now and then. Since I do my coding on Windows, and I don't want to upload/download the changed files all the time, I want to access this /mnt/mydomain.com via a samba share. So I shared /mnt in samba, all mounts except mydomain.com is listed on my Windows Explorer. My theories are: sshfs does not set the mountpoint uid/gid to something that samba expects samba does not know that it has to include the uid/gid that /mnt/mydomain.com has been set. All above is wrong, and I don't know. Here are configs and output from console, need anything else just let me know. Also no errors or warnings that I take notice of being relevant to this issue, but I might be wrong. gentoo ~ # ls -lah /mnt total 20K drwxr-xr-x 9 root root 4.0K Mar 26 16:15 . drwxr-xr-x 18 root root 4.0K Mar 26 2011 .. -rw-r--r-- 1 root root 0 Feb 1 16:12 .keep drwxr-xr-x 1 root root 0 Mar 18 12:09 buffer drwxr-s--x 1 68591 68591 4.0K Feb 16 15:43 mydomain.com drwx------ 2 root root 4.0K Feb 1 16:12 cdrom drwx------ 2 root root 4.0K Feb 1 16:12 floppy drwxr-xr-x 1 root root 0 Sep 1 2009 services drwxr-xr-x 1 root root 0 Feb 10 15:08 www /etc/samba/smb.conf [mnt] comment = Mount points writable = yes writeable = yes browseable = yes browsable = yes path = /mnt /etc/fstab sshfs#[email protected]:/home/to/pub/dir/ /mnt/mydomain.com/ fuse comment=sshfs,noauto,users,exec,uid=0,gid=0,allow_other,reconnect,follow_symlinks,transform_symlinks,idmap=none,SSHOPT=HostBasedAuthentication 0 0 For an easier read: [email protected] /home/to/pub/dir/ /mnt/mydomain.com/ options: comment=sshfs noauto users exec uid=0 gid=0 allow_other reconnect follow_symlinks transform_symlinks idmap=none SSHOPT=HostBasedAuthentication Help!

  Read the article

• Android webbrowser returns code 500 for webpage on Nginx webserver

  - by Paxxil

  Hey! I've come to a very weird behavior of a web browser on android mobile phone (I've tried HTC Wildfire and HTC Desire phones). I have a web server with Nginx v0.8.54. When i try to open a web page on the phone it shows me error: The requested item could not be loaded! (Status code: 500) BUT it only happens when I am requesting page through Mobile network. On Wifi it works just fine .... but there is more .... if I stop Nginx and start Apache web server it works just fine on both Mobile network and wifi. I've also tried other mobile network and it is the same behavior. Some server stats: Firewall is OFF Selinux is OFF the web page (using Nginx web server) opens normally on any other browser (IE, FF, Opera, Chrome, Safari) on the laptop or PC Nothing in nginx error.log This is the only entry in access.log when the page is requested: xxx.xxx.xxx.xxx - - [17/Mar/2011:11:19:49 -0500] 200 "GET / HTTP/1.1" 27405 "-" "Mozilla/5.0 (Linux; U; Android 2.2; en-gb; Desire_A8181 Build/FRF91) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" "-" index.html has only "Hello World" string in it. There is no fishy javascript or anything else. .... but there is even more.... if i open the same page on another server, with the same Nginx build, with the same server and web server configuration.... it opens just fine. if anyone has any idea on what may be going on, i would really appreciate it if you let me know. Thanks! EDIT: i forgot to mention that page opens OK on Iphone and Nokia

  Read the article

• Is there a good alternative to Videora iPod Converter?

  - by Richard

  I use Videora to convert my videos (in DivX/XviD format) to something I can play on my iPod Classic. I really dislike it. It's clunky, riddled with adverts, sometimes doesn't convert properly (the infamous "invalid public atom" error - see Google for more) and has a UI that truly stinks. On the upside, it's free, accepts a list of video files (via the oddly hard to find "1-click convert" button) and just gets on with the converting as it already knows the correct settings for my iPod. One final nice touch is that once they are converted, it'll automatically upload them into iTunes. Are there any alternatives which have all the upsides but none of the downsides? Bonus points if they can set the metadata in iTunes correctly for TV shows (season, show, episode) and delete the converted file afterwards (as my iTunes settings means that a copy is made elsewhere). I've looked at a bunch of applications (handbrake, virtualdub, mediacoder, format factory, any video converter, convertxtodvd) but many of them fail the "just select a list of files and get on with converting" test - let alone all the other features I want. I have no desire to individually set the video size of each file or the codec or the post-processing options. I'm currently using the command line version of HandBrake (handbrakecli) and a hand-written DOS batch file to go through every file in a folder and convert it. It does most of what I want, just not in a very slick way. Can anyone recommend anything better? It needs to work on Windows 7 and be free.

  Read the article

• Hardware chose: ASUS Eee Pad Slider or ASUS Eee Pad Transformer for web development?

  - by JamesM

  I was just wondering out of the following Tablets which one seams better to get? I am a web-developer, Always using Unix/Linux/BSD, I want a tablet that has a keyboard. http://gdgt.com/asus/eee/pad/slider/ http://gdgt.com/asus/eee/pad/transformer/ http://www.tweaktown.com/news/18311/asus_eee_pad_slider_transformer_tablets_with_physical_keyboard/index.html I know both are similar, but not sure what one I should get. The Slider seems very nice but again the keyboard is fixed to the tablet unlike the Transformer. P.S: I'm going to use one of the above to showcase my programming work at school, as well as just being used as a cheaper notebook than the $300 Windows.7 locked down notebooks. By Locked down, I mean we pay $300 for them and after 3 years we can do what ever to them, they are Lenovo thinkpad mini-10 and What they have installed is all you get, they don't let us install what ever OS on them. And with the question on both of those links, I think that the transformer would be better but that is only taking in the fact of it being both a tablet and a notebook. What I really care about is power; which one is more powerful? It will be running kFreeBSD-Debian-Squeeze with Linux-Mint theme with several other packages. Though I'm not going to run Windows (which I feel is bloated), I still want power. To help keep my computer from slowing down with cache, I will have a cron.d/hourly script cleaning out the cache memory.

  Read the article

• IIS / Virtual Directory authentication.

  - by Chris L

  I have an IIS(v6)/Windows 2003/.Net 3.5(app code, libraries etc.) server hosting a website at www.mywebsite.com mapped to E:\Inetpub\wwwroot\mywebsite, we also have a virtual directory (VirtDir) mapped out to E:\Inetpub\wwwroot\mywebsite\files (although in theory this could be in a different directory or a separate machine) where we store a customer's files(a bunch of .pdf & .xls). Currently to access a file you can enter into the url something like: www.mywebsite.com/VirtDir/Customer/myFile.pdf and get access to the file. The problem is the user doesn't have to log into www.mywebsite.com to get access to the file, we would prefer them to log in first. We would like the user to login via the mywebsite and if valid, let them download files from the virtual directory. The www.mywebsite.com and VirtDir are separate sites on the same farm. Allow Anon Access, and Integrated Windows Authentication both enabled. I'm more of a developer and less of a Sys Admin, but hopefully I'm in the right spot, any help would be appreciated.

  Read the article

• Safemode Startup Issues on Vista 64 Bit

  - by GnrlBzik

  Before i ask the question, let me point out that this is not a hardware issue. I have a clean install of vista on another hd that runs on same hardware, i am pretty sure its a corruption of a drive or a file, i presume it might be video driver. When windows wont start via normal boot i just get black screen after initial load up of os, so i boot into savemode, I end up having black screen with a mouse pointer visible, after initial load of os. The shut down button is responsive. Of course, I can install clean copy of os, and prior to that can retrieve all other files that i need by accessing hd itself, i can restore my pc from my external back up as well. Although i have all these options, i was wondering if there anything else i can do that can help me fix this issue. In save mode, it looks like I am capable of logging in after initial load of os, even though i cant see the process it self, i do see the mouse pointer. By visual memory i navigated to password field, and entered my password, hit enter, I get the loading mouse pointer, nothing really changes, same black screen and mouse pointer, but when i tried to access task manager for a second i got a safemode watermark at all four corners. Any help would be appriciated. Thank you in advance.

  Read the article

• Enable gzip on Nginx

  - by Rob Wilkerson

  Yes, I know that there are a lot of other questions that seem exactly like this out there. I think I must've looked all of them. Twice. In desparation, I'm adding another in case my specific configuration is the issue. Bear with me. First, the question: What do I need to do to get gzip compression to work? I have an Ubuntu 12.04 server installed running nginx 1.1.19. Nginx was installed with the following packages: nginx nginx-common nginx-full The http block of my nginx.conf looks like this: http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "msie6"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Both PageSpeed and YSlow are reporting that I need to enable compression. I can see that the request headers indicate Accept-Encoding:gzip,deflate,sdch, but the response headers do not have the corollary Content-Encoding header. I've tried various other config values (gzip_vary on, gzip_http_version 1.0, etc.), but no joy. As far as I know, I can only assume that nginx was compiled with compression support, but if there's any way to verify that, I'd love to know. If anyone sees anything I'm missing or can suggest further debugging, please let me know. I'm no sysadmin and I'm new to Nginx so I've exhausted everything I can think of or have read. Thanks.

  Read the article

• What is causing sudden freezing during running real-time program?

  - by Trevor Boyd Smith

  So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

  Read the article

• How to correctly configure DNS for Icelandic domains and Plesk

  - by Leonard Challis

  I have a domain registered with ISNIC (domain.is). They only let you set nameservers that pass their requirements. I've been told it's this requirement that I need to fix: Nameserver must be consistently registered in DNS, i.e. its own A resource record must be available and a corresponding PTR resource record as well. I allocated two new IP addresses from my server host and at that point set their PTR records to ns0.domain.is and ns1.domain.is. After that I created two A records for that domain in Plesk, again ns0. and ns2.domain.is with their respective IPs. Next, I went to the ISNIC page to register my nameservers, along with their IP addresses I'd allocated and this worked perfectly for both without error. So the final job was to set the nameservers for the domain via ISNIC's control panel, however when I try, I'm getting this error: Test results for "NS0.DOMAIN.IS": The nameserver ns1.vps123.vpsprovider.com is not consistently registered in DNS (ns1.vps123.vpsprovider.com => 1123.123.123.123 => vps123.vpsprovider.com) The nameserver ns0.vps123.vpsprovider.com is not consistently registered in DNS (ns0.vps123.vpsprovider.com => 1123.123.123.123 => vps123.vpsprovider.com) The nameserver ns0.DOMAIN.IS is missing from the NS record set for DOMAIN.IS Test results for "NS1.DOMAIN.IS": The nameserver ns1.DOMAIN.IS is missing from the NS record set for DOMAIN.IS The nameserver ns0.DOMAIN.IS is missing from the NS record set for DOMAIN.IS This is really at the limits of my DNS knowledge I'm afraid. It feels like I'm close but maybe missing a vital part, linking the nameservers in Plesk or something?

  Read the article

• Whats the easiest route to trying out mono 2.6?

  - by E J

  We have several web applications built on Microsoft technologies (asp.net+mvc framework, built using VS2008, MS SQL Server). I have recently be playing with Ubuntu (9.10), installed using Wubi, and wanted to see if I can get our apps running on a foss software stack. I have got the hang of the very basics of Postgresql and I have read that there is some support for Linq to SQL in mono (as of 2.6) as well as asp.net/MVC. However I am unsure how to go about getting Mono 2.6 up and running. Here is what I have discovered so far: Ubuntu is not meant for the 'cutting edge' it is designed to be stable hence, it sometimes takes a release cycle or two for new software to make it to the repositories Mono is already installed by default, but it is likely to stay at version 2.4 for at least the 10.4 release You can install paralell environments of Mono, if you know what your doing. I have had a go at setting up parallel environments, but haven't had any luck yet. (And TBH I am not certain that that will do what I think it's gonna do). (tl;dr start here) Is there a distribution of Linux similar enough to Ubuntu, that I wouldn't have to start the learning curve all over again, but that will let me install Mono 2.6, Postgresql, (and possibly mono-develop 2.4)? Or should I persist with Ubuntu?

  Read the article

• Blank list of windows services

  - by Joe

  Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

  Read the article

• Amazon AWS VPN how to open a port?

  - by Victor Piousbox

  I have a VPN with public and private subnets; I am considering only public subnet for now. The node 10.0.0.23, I can ssh into it. Let's say I want to connect to MySQL on the node using its private address: ubuntu@ip-10-0-0-23:/$ mysql -u root -h 10.0.0.23 ERROR 2003 (HY000): Can't connect to MySQL server on '10.0.0.23' (111) ubuntu@ip-10-0-0-23:/$ mysql -u root -h localhost Welcome to the MySQL monitor. Commands end with ; or \g. --- 8< --- snip --- 8< --- mysql> The port 3306 is not reachable if I use the private IP? My security group allows port 3306 inbound from 0.0.0.0/0 AND from 10.0.0.0/24. Outbound, allowed all. The generic setup done by Amazon through their wizard does not work... I add ACL that allows everything for everybody, still does not work. What am I missing?

  Read the article

• ORA- 01157 / Cant connect to database

  - by Tom

  Hi everyone, this is a follow up from this question. Let me start by saying that i am NOT a DBA, so i'm really really lost with this. A few weeks ago, we lost contact with one of our SID'S. All the other services are working, but this one in particular is not. What we got was this message when trying to connect ORA-01033: ORACLE initialization or shutdown in progress An attempt to alter database open ended up in ORA-01157: cannot identify/lock data file 6 - see DBWR trace file ORA-01110: data file 6: '/u01/app/oracle/oradata/xxx/xxx_data.dbf' I tried to shutdown / restart the database, but got this message. Total System Global Area 566231040 bytes Fixed Size 1220604 bytes Variable Size 117440516 bytes Database Buffers 444596224 bytes Redo Buffers 2973696 bytes Database mounted. ORA-01157: cannot identify/lock data file 6 - see DBWR trace file ORA-01110: data file 6: '/u01/app/oracle/oradata/xxx/xxx_data.dbf' When all continued the same, I erased the dbf files (rm xxx_data.dbf xxx_index.dbf), and recreated them using touch xxx_data.dbf. I also tried to recreate the tablespaces using `CREATE TABLESPACE DATA DATAFILE XXX_DATA.DBF` and got Database not open As I said, i don't know how bad this is, or how far i'm from gaining access to my database (well, to this SID at least, the others are working). I would imagine that a last resource would be to throw everything away, and recreating it, but I don't know how to, and I was hoping there's a less destructive solution. Any help will be greatly appreciated . Thanks in advance.

  Read the article

• How can I print from my lion mac mini to my windows XP, with simple file sharing?

  - by Jules

  I have quite a complicated setup, perhaps. And a lot of history on this issue, I'm hoping that I don't have to buy a new printer. I've got a HP Wireless USB Print Server, which requires client software, I can't just use it as an IP Printer. The HP software is pretty poor on the mac and is no longer supported and often locks up the printer server and takes some considerable effort to actually print something. Let alone if a windows machine attaches to it first. My printer is an Epson Stylus R285. However, the windows client software is fine and we can print from windows 7 / XP without problem. We have simple file sharing setup as this is the only way I could get windows XP to talk to windows 7. However, I can't seem to get my mac mini to connect as anything other than a guest to my xp machine, to connect to the shared printer. I'm not considering some kind of internet printing as this would seems the simplest solution. But I'm not sure what will work with my setup ?

  Read the article

• Loading a big database dump into PostgreSQL using cat

  - by RussH

  I have a pair of very large (~17 GB) database dumps that I want to load into postgresql 9.3. After installing the database packages, learning more or less how to use them, and fiddling around a little on various StackExchange pages (particularly this question), it looks like a proper command for me to use is something like: cat mydb.pgdump | psql mydb because of the format the dump is in. My machine has 16 GB of RAM, and I'm not familiar with the cat command but I do know that my RAM is 99% exhausted and the database is taking a while to load. My machine isn't non-responsive to the point of hanging; I can run other commands in other terminal windows and have them execute at a reasonable clip, but I am wondering if cat is the best way to pipe in the file or if something else is more efficient? My concern is that maybe cat could be using up all the RAM so the database doesn't have much to work with, throttling its performance. But I'm new to thinking about RAM issues like this and don't know if I'm worrying about nothing. Now that I think about it, this seems to be more of a question about cat and its memory usage than anything else. If there is a more appropriate forum for this question please let me know. Thanks!

  Read the article

• How to use a home network patch panel?

  - by Torben Gundtofte-Bruun

  I'm planning a home network in a house that's not built yet. One recommendation is to add network sockets in various rooms and have them all end in a central place, where it all connects using a network switch. So far so good. Another recommendation says to not connect everything directly to the switch, but to a patch panel which in turn is connected to the switch. I'm unsure why this is good. Is there any practical advantage of using a patch panel if you're not planning to re-wire things very often? How does a patch panel actually work? Let's say it has 24 ports. Does it have another 24 ports on the backside that go to the switch, or what? Wikipedia isn't helpful on this. Clarification: I am planning to run network cables through conduits inside the walls and terminated with network sockets in the wall (as opposed to having just conduits and long regular network cables that have a normal plug in each end). Going by RedGrittyBrick's answer, a patch panel is nearly unavoidable in that case.

  Read the article

• Enterprise class storage best practices

  - by churnd

  One thing that has always perplexed me is storage best practices. Filesystems brag about how they can be petabytes or exabytes in size. Yet, I do not know many sysadmins who are willing to let a single volume grow over several terrabytes. I do know the primary reason behind this is how long it would take to rebuild the array should a drive fail. The more drives in a single LUN, the longer this takes and the greater your risk of losing another drive while the rebuild is taking place. Then there's usage reasons. Admins will carve out a LUN based on how much space they think needs to be allocated to the project. It seems more practical to me for the LUN to be one large array and to use quotas. I understand this wouldn't satisfy every requirement (iSCSI), but I see a lot of NAS systems (NFS) managed this way. I also understand that the underlying volumes can be grown/shrunk as needed quite easily, but wouldn't it be less "risky" to use quotas rather than manipulating volumes and bringing possible data loss into the equation? There may be some other reasons I'm missing, so please enlighten me. Can we not expect filesystems to ever be so large? Are we waiting for the hardware to get faster to cut down on rebuild times?

  Read the article

• Automate creation of Windows startup script?

  - by Niten

  Is there a good way to automate installing local startup (rather than login) scripts in Windows XP and Windows 7, via the command line, WMI, COM, or otherwise (even Win32 if it comes to that)? I need to setup a local startup script on a large number of computers, and unfortunately, Active Directory is absolutely not an option. I would like to write a script or small program that I can run on each computer to perform the startup script installation in order to save myself a lot of error-prone point-and-click manual labor. I see that when one uses gpedit.msc to create a local startup script, information about the script gets stored in the registry here: HKLM\Software\Policies\Microsoft\Windows\System\Scripts\Startup However, if you create such a script and then delete its registry key, the script will remain listed in the local Group Policy editor; as is so often the case in Windows, apparently there is more going on there than meets the eye. This leads me to question whether it's safe to manually add subkeys for new startup scripts here (I wouldn't want my script to be overwritten by later changes made using the local Group Policy editor, for instance)... Another option that's occurred to me is to create an item in the Task Scheduler configured to run at system startup. However, my concerns there are twofold: Can this be automated any more easily? For instance, the at command doesn't appear to let you schedule a task for system startup, and WMI's Win32_ScheduledJob interface looks unreliable (it fails to show any of my currently scheduled tasks, for one thing). Would I be able to prevent users from logging in until the scheduled startup task is completed, as can be done with "normal" Windows startup scripts? Thanks in advance for any suggestions, I've been banging my head against this one for a bit...

  Read the article

• Windows 7, Printer is unavailable until PC reboot

  - by Cjs

  We are having a problem that I haven't seen before and can find no answers to online. A desktop running Windows 7 is unable to print using network printers. When the user tries, no matter what printer it is, he get's the following message when using Microsoft Office applications: "Current printer is unavailable. Select another printer." When the end user uses Outlook we get the message: "Printing is not available. There are no printers installed. You can select and configure a printer in Windows Control Panel." Now here is the confusing part, if we reboot the pc it works fine for a little while and then goes back to the same old same old. The printers are working fine for every other user as well so I believe it is the user's machine. If anyone has any ideas please let me know. Edit: I'd like to add in that some people were having luck disabling snmp for the printers. Restarting the print spooler doesn't seem to do anything.

  Read the article

• Problems using InfraRecorder to back up ISOs of certain CDs

  - by Voyagerfan5761

  I've gotten into the habit of backing up my CDs as ISO files, just in case the discs should be damanged, lost, or destroyed. Using InfraRecorder, the process is pretty painless. Unfortunately, I have run into at least two discs that don't back up. I get the error message: Can't read source disc. Retrying from sector 252270 Sometimes this will appear repeatedly. One of the discs is my retail copy of Star Trek: Armada II; the other is disc one of DOOM 3. Both discs run flawlessly when I put them in the drive and let Windows AutoPlay them. Armada II appears as two tracks (one data, one audio) in InfraRecorder, and the error happens at the approximate track boundary. DOOM 3's first disc, however, fails much sooner (around sector 990) and appears as one solid data track. Am I simply using the wrong tools for this job? InfraRecorder is a nice free tool that I can run from my flash drive and use for most tasks of this type, but it does seem to have trouble with certain things. Ideally I'd like to hear about any workarounds people have found for this issue, but if I must switch tools I'm open to it (preferably other free tools).

  Read the article

• How ZFS handles online replacement in a RAID-Z (theoretical)

  - by Kevin

  This is a somewhat theoretical question about ZFS and RAID-Z. I'll use a three disk single-parity array as an example for clarity, but the problem can be extended to any number of disks and any parity. Suppose we have disks A, B, and C in the pool, and that it is clean. Suppose now that we physically add disk D with the intention of replacing disk C, and that disk C is still functioning correctly and is only being replaced out of preventive maintenance. Some admins might just yank C and install D, which is a little more organized as devices need not change IDs - however this does leave the array degraded temporarily and so for this example suppose we install D without offlining or removing C. Solaris docs indicate that we can replace a disk without first offlining it, using a command such as: zpool replace pool C D This should cause a resilvering onto D. Let us say that resilvering proceeds "downwards" along a "cursor." (I don't know the actual terminology used in the internal implementation.) Suppose now that midways through the resilvering, disk A fails. In theory, this should be recoverable, as above the cursor B and D contain sufficient parity and below the cursor B and C contain sufficient parity. However, whether or not this is actually recoverable depnds upon internal design decisions in ZFS which I am not aware of (and which the manual doesn't say in certain terms). If ZFS continues to send writes to C below the cursor, then we are fine. If, however, ZFS internally treats C as though it were gone, resilvering D only from parity between A and B and only writing A and B below the cursor, then we're toast. Some experimenting could answer this question but I was hoping maybe someone on here already knows which way ZFS handles this situation. Thank you in advance for any insight!

  Read the article

< Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >