Search Results

Search found 12895 results on 516 pages for 'multi boot'.

Page 512/516 | < Previous Page | 508 509 510 511 512 513 514 515 516  | Next Page >

• NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

  - by Jagged

  I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

  Read the article

• Begin the Clone Wars Have!

  - by Antony Reynolds

  Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5.  That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs.  However I also wanted to run some testing of FMW with the database running on a separate physical machine.  So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware.  Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again!  Life is too short! #2 is probably the safest way of doing things.  VirtualBox allows you to clone a disk image for use in a separate machine.  However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things.  It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside.  However this is not a problem for me as long as I remember to keep all threee images together.  So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use.  We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment.  In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software.  I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle.  But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine.  Adapter 1 was a standard NAT mapping.  This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway.  This is the same as the existing configuration. The second adapter I created as a bridged adapter.  This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other.  It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network.  Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM.  If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network.  You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine.  If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk.  I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged.  Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration.  In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address.  I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS.  So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP.  There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101      vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.2.15       vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.3.102      vboxfmw.oracle.com      vboxfmw # Added by NetworkManager 127.0.0.1       localhost.localdomain   localhost ::1     vboxdb.oracle.com       vboxdb  localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname:       (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control.  I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”.  On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used.  As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain.  When creating the domain I can point it at the second machine which is running the database.  I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them.  This is because we want to keep the database in sync with the middleware.  One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines.  I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image.  Just remember what machine holds state and what are the consequences of taking a snapshot.

  Read the article

• Integrating NetBeans for Raspberry Pi Java Development

  - by speakjava

  Raspberry Pi IDE Java Development The Raspberry Pi is an incredible device for building embedded Java applications but, despite being able to run an IDE on the Pi it really pushes things to the limit.  It's much better to use a PC or laptop to develop the code and then deploy and test on the Pi.  What I thought I'd do in this blog entry was to run through the steps necessary to set up NetBeans on a PC for Java code development, with automatic deployment to the Raspberry Pi as part of the build process. I will assume that your starting point is a Raspberry Pi with an SD card that has one of the latest Raspbian images on it.  This is good because this now includes the JDK 7 as part of the distro, so no need to download and install a separate JDK.  I will also assume that you have installed the JDK and NetBeans on your PC.  These can be downloaded here. There are numerous approaches you can take to this including mounting the file system from the Raspberry Pi remotely on your development machine.  I tried this and I found that NetBeans got rather upset if the file system disappeared either through network interruption or the Raspberry Pi being turned off.  The following method uses copying over SSH, which will fail more gracefully if the Pi is not responding. Step 1: Enable SSH on the Raspberry Pi To run the Java applications you create you will need to start Java on the Raspberry Pi with the appropriate class name, classpath and parameters.  For non-JavaFX applications you can either do this from the Raspberry Pi desktop or, if you do not have a monitor connected through a remote command line.  To execute the remote command line you need to enable SSH (a secure shell login over the network) and connect using an application like PuTTY. You can enable SSH when you first boot the Raspberry Pi, as the raspi-config program runs automatically.  You can also run it at any time afterwards by running the command: sudo raspi-config This will bring up a menu of options.  Select '8 Advanced Options' and on the next screen select 'A$ SSH'.  Select 'Enable' and the task is complete. Step 2: Configure Raspberry Pi Networking By default, the Raspbian distribution configures the ethernet connection to use DHCP rather than a static IP address.  You can continue to use DHCP if you want, but to avoid having to potentially change settings whenever you reboot the Pi using a static IP address is simpler. To configure this on the Pi you need to edit the /etc/network/interfaces file.  You will need to do this as root using the sudo command, so something like sudo vi /etc/network/interfaces.  In this file you will see this line: iface eth0 inet dhcp This needs to be changed to the following: iface eth0 inet static     address 10.0.0.2     gateway 10.0.0.254     netmask 255.255.255.0 You will need to change the values in red to an appropriate IP address and to match the address of your gateway. Step 3: Create a Public-Private Key Pair On Your Development Machine How you do this will depend on which Operating system you are using: Mac OSX or Linux Run the command: ssh-keygen -t rsa Press ENTER/RETURN to accept the default destination for saving the key.  We do not need a passphrase so simply press ENTER/RETURN for an empty one and once more to confirm. The key will be created in the file .ssh/id_rsa.pub in your home directory.  Display the contents of this file using the cat command: cat ~/.ssh/id_rsa.pub Open a window, SSH to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if the file does not exist).  Copy and paste the contents of the id_rsa.pub file to the authorized_keys file and save it. Windows Since Windows is not a UNIX derivative operating system it does not include the necessary key generating software by default.  To generate the key I used puttygen.exe which is available from the same site that provides the PuTTY application, here. Download this and run it on your Windows machine.  Follow the instructions to generate a key.  I remove the key comment, but you can leave that if you want. Click "Save private key", confirm that you don't want to use a passphrase and select a filename and location for the key. Copy the public key from the part of the window marked, "Public key for pasting into OpenSSH authorized_keys file".  Use PuTTY to connect to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if this does not exist).  Paste the key information at the end of this file and save it. Logout and then start PuTTY again.  This time we need to create a saved session using the private key.  Type in the IP address of the Raspberry Pi in the "Hostname (or IP address)" field and expand "SSH" under the "Connection" category.  Select "Auth" (see the screen shot below). Click the "Browse" button under "Private key file for authentication" and select the file you saved from puttygen. Go back to the "Session" category and enter a short name in the saved sessions field, as shown below.  Click "Save" to save the session. Step 4: Test The Configuration You should now have the ability to use scp (Mac/Linux) or pscp.exe (Windows) to copy files from your development machine to the Raspberry Pi without needing to authenticate by typing in a password (so we can automate the process in NetBeans).  It's a good idea to test this using something like: scp /tmp/foo [email protected]:/tmp on Linux or Mac or pscp.exe foo pi@raspi:/tmp on Windows (Note that we use the saved configuration name instead of the IP address or hostname so the public key is picked up). pscp.exe is another tool available from the creators of PuTTY. Step 5: Configure the NetBeans Build Script Start NetBeans and create a new project (or open an existing one that you want to deploy automatically to the Raspberry Pi). Select the Files tab in the explorer window and expand your project.  You will see a build.xml file.  Double click this to edit it. This file will mostly be comments.  At the end (but within the </project> tag) add the XML for <target name="-post-jar">, shown below Here's the code again in case you want to use cut-and-paste: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="scp" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="[email protected]:NetBeans/CopyTest"/>   </exec>  </target> For Windows it will be slightly different: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="C:\pi\putty\pscp.exe" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="pi@raspi:NetBeans/CopyTest"/>   </exec> </target> You will also need to ensure that pscp.exe is in your PATH (or specify a fully qualified pathname). From now on when you clean and build the project the dist directory will automatically be copied to the Raspberry Pi ready for testing.

  Read the article

• Internet doesn't work by default

  - by Adam Martinez

  After upgrading to Precise, I am required to run 'sudo dhclient eth0' in a terminal in order to get the internet to work. Everything worked perfectly fine on Oneiric, so It's really puzzling me. I'm thinking it could possibly be something with the kernel, but who knows. Output of dmesg: [ 0.247891] system 00:01: [io 0x0290-0x030f] has been reserved [ 0.247896] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.247901] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.247908] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.247931] pnp 00:02: [dma 4] [ 0.247935] pnp 00:02: [io 0x0000-0x000f] [ 0.247939] pnp 00:02: [io 0x0080-0x0090] [ 0.247943] pnp 00:02: [io 0x0094-0x009f] [ 0.247947] pnp 00:02: [io 0x00c0-0x00df] [ 0.248033] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.248125] pnp 00:03: [io 0x0070-0x0073] [ 0.248187] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.248205] pnp 00:04: [io 0x0061] [ 0.248260] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.248277] pnp 00:05: [io 0x00f0-0x00ff] [ 0.248292] pnp 00:05: [irq 13] [ 0.248348] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.248583] pnp 00:06: [io 0x03f0-0x03f5] [ 0.248588] pnp 00:06: [io 0x03f7] [ 0.248597] pnp 00:06: [irq 6] [ 0.248601] pnp 00:06: [dma 2] [ 0.248690] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.248998] pnp 00:07: [io 0x03f8-0x03ff] [ 0.249008] pnp 00:07: [irq 4] [ 0.249122] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.249479] pnp 00:08: [io 0x0400-0x04bf] [ 0.249584] system 00:08: [io 0x0400-0x04bf] has been reserved [ 0.249591] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.249628] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.249690] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) [ 0.250049] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.250167] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.250173] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.250302] pnp 00:0b: [mem 0x000f0000-0x000fffff] [ 0.250307] pnp 00:0b: [mem 0x7ff00000-0x7fffffff] [ 0.250311] pnp 00:0b: [mem 0xfed00000-0xfed000ff] [ 0.250316] pnp 00:0b: [mem 0x0000046e-0x0000056d] [ 0.250320] pnp 00:0b: [mem 0x7fee0000-0x7fefffff] [ 0.250324] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.250328] pnp 00:0b: [mem 0x00100000-0x7fedffff] [ 0.250332] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.250336] pnp 00:0b: [mem 0xfed14000-0xfed1dfff] [ 0.250341] pnp 00:0b: [mem 0xfed20000-0xfed9ffff] [ 0.250345] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.250349] pnp 00:0b: [mem 0xffb00000-0xffb7ffff] [ 0.250353] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.250357] pnp 00:0b: [mem 0x000e0000-0x000effff] [ 0.250409] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.250419] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.250430] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.250524] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.250530] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved [ 0.250536] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.250541] system 00:0b: [mem 0x7fee0000-0x7fefffff] could not be reserved [ 0.250547] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.250552] system 00:0b: [mem 0x00100000-0x7fedffff] could not be reserved [ 0.250558] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.250563] system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved [ 0.250568] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.250574] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.250579] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.250585] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.250590] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved [ 0.250596] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.250614] pnp: PnP ACPI: found 12 devices [ 0.250617] ACPI: ACPI bus type pnp unregistered [ 0.250624] PnPBIOS: Disabled by ACPI PNP [ 0.288725] PCI: max bus depth: 1 pci_try_num: 2 [ 0.288786] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref] [ 0.288792] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.288797] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.288804] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.288811] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.288820] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.288825] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.288833] pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.288840] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.288851] pci 0000:03:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref] [ 0.288856] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.288861] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.288869] pci 0000:00:1c.4: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.288876] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.288887] pci 0000:04:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.288891] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.288897] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff] [ 0.288904] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.288911] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.288920] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.288926] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.288933] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.288940] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.288971] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.288979] pci 0000:00:01.0: setting latency timer to 64 [ 0.288991] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.288998] pci 0000:00:1c.0: setting latency timer to 64 [ 0.289008] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.289014] pci 0000:00:1c.4: setting latency timer to 64 [ 0.289030] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.289037] pci 0000:00:1c.5: setting latency timer to 64 [ 0.289047] pci 0000:00:1e.0: setting latency timer to 64 [ 0.289054] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.289058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.289063] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.289067] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.289072] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.289077] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.289081] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.289086] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.289092] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.289096] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.289101] pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.289106] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.289110] pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.289115] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.289120] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.289124] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.289129] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.289134] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.289138] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.289143] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.289148] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.289152] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.289157] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.289161] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.289166] pci_bus 0000:05: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.289233] NET: Registered protocol family 2 [ 0.289360] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.289754] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.290351] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.290670] TCP: Hash tables configured (established 131072 bind 65536) [ 0.290674] TCP reno registered [ 0.290680] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.290703] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.290868] NET: Registered protocol family 1 [ 0.290911] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.290932] pci 0000:00:1a.0: PCI INT A disabled [ 0.290956] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.290975] pci 0000:00:1a.1: PCI INT B disabled [ 0.290992] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.291012] pci 0000:00:1a.2: PCI INT D disabled [ 0.291031] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.291068] pci 0000:00:1a.7: PCI INT C disabled [ 0.291104] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.291123] pci 0000:00:1d.0: PCI INT A disabled [ 0.291135] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.291155] pci 0000:00:1d.1: PCI INT B disabled [ 0.291166] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.291185] pci 0000:00:1d.2: PCI INT C disabled [ 0.291198] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.291219] pci 0000:00:1d.7: PCI INT A disabled [ 0.291258] pci 0000:01:00.0: Boot video device [ 0.291273] PCI: CLS 4 bytes, default 64 [ 0.291857] audit: initializing netlink socket (disabled) [ 0.291876] type=2000 audit(1336753420.284:1): initialized [ 0.337724] highmem bounce pool size: 64 pages [ 0.337734] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.349241] VFS: Disk quotas dquot_6.5.2 [ 0.349365] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.350418] fuse init (API version 7.17) [ 0.350611] msgmni has been set to 1685 [ 0.351179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.351229] io scheduler noop registered [ 0.351233] io scheduler deadline registered [ 0.351247] io scheduler cfq registered (default) [ 0.351450] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.351502] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.351585] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.351639] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.351728] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.351779] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.351875] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.351927] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.352094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.352143] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.352311] intel_idle: MWAIT substates: 0x22220 [ 0.352315] intel_idle: does not run on family 6 model 23 [ 0.352446] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.352455] ACPI: Power Button [PWRB] [ 0.352556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.352562] ACPI: Power Button [PWRF] [ 0.352650] ACPI: Fan [FAN] (on) [ 0.355667] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.355673] ACPI: Thermal Zone [THRM] (26 C) [ 0.355750] ERST: Table is not found! [ 0.355753] GHES: HEST is not enabled! [ 0.355898] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.376332] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.376582] isapnp: Scanning for PnP cards... [ 0.709133] Freeing initrd memory: 13792k freed [ 0.729743] isapnp: No Plug & Play device found [ 0.816786] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.832385] Linux agpgart interface v0.103 [ 0.835605] brd: module loaded [ 0.837138] loop: module loaded [ 0.837452] ata_piix 0000:00:1f.2: version 2.13 [ 0.837473] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.837480] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.837546] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.838099] scsi0 : ata_piix [ 0.838253] scsi1 : ata_piix [ 0.839183] ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19 [ 0.839192] ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19 [ 0.839239] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.839246] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.839300] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.839708] scsi2 : ata_piix [ 0.839841] scsi3 : ata_piix [ 0.840301] ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19 [ 0.840308] ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19 [ 0.840429] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.840467] pata_acpi 0000:03:00.0: setting latency timer to 64 [ 0.840488] pata_acpi 0000:03:00.0: PCI INT A disabled [ 0.841159] Fixed MDIO Bus: probed [ 0.841205] tun: Universal TUN/TAP device driver, 1.6 [ 0.841210] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.841322] PPP generic driver version 2.4.2 [ 0.841515] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.841542] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.841567] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.841573] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.841658] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.845582] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported [ 0.845610] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 [ 0.860022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.860264] hub 1-0:1.0: USB hub found [ 0.860272] hub 1-0:1.0: 6 ports detected [ 0.860404] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.860424] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.860430] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.860512] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.864413] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported [ 0.864438] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 [ 0.880021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.880227] hub 2-0:1.0: USB hub found [ 0.880234] hub 2-0:1.0: 6 ports detected [ 0.880369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.880396] uhci_hcd: USB Universal Host Controller Interface driver [ 0.880431] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.880443] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.880449] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.880529] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.880574] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.880803] hub 3-0:1.0: USB hub found [ 0.880811] hub 3-0:1.0: 2 ports detected [ 0.880929] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.880940] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.880946] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.881039] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.881081] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.881302] hub 4-0:1.0: USB hub found [ 0.881310] hub 4-0:1.0: 2 ports detected [ 0.881427] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.881438] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.881443] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.881523] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.881551] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00 [ 0.881774] hub 5-0:1.0: USB hub found [ 0.881781] hub 5-0:1.0: 2 ports detected [ 0.881899] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.881910] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.881915] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.881993] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.882021] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.882244] hub 6-0:1.0: USB hub found [ 0.882252] hub 6-0:1.0: 2 ports detected [ 0.882370] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.882381] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.882386] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.882467] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.882495] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.882735] hub 7-0:1.0: USB hub found [ 0.882742] hub 7-0:1.0: 2 ports detected [ 0.882858] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.882869] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.882875] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.882954] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.882982] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.883205] hub 8-0:1.0: USB hub found [ 0.883213] hub 8-0:1.0: 2 ports detected [ 0.883435] usbcore: registered new interface driver libusual [ 0.883535] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.883926] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.883936] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.884187] mousedev: PS/2 mouse device common for all mice [ 0.884433] rtc_cmos 00:03: RTC can wake from S4 [ 0.884582] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.884612] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.884719] device-mapper: uevent: version 1.0.3 [ 0.884854] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 0.884917] EISA: Probing bus 0 at eisa.0 [ 0.884921] EISA: Cannot allocate resource for mainboard [ 0.884925] Cannot allocate resource for EISA slot 1 [ 0.884929] Cannot allocate resource for EISA slot 2 [ 0.884932] Cannot allocate resource for EISA slot 3 [ 0.884936] Cannot allocate resource for EISA slot 4 [ 0.884940] Cannot allocate resource for EISA slot 5 [ 0.884943] Cannot allocate resource for EISA slot 6 [ 0.884947] Cannot allocate resource for EISA slot 7 [ 0.884950] Cannot allocate resource for EISA slot 8 [ 0.884954] EISA: Detected 0 cards. [ 0.884969] cpufreq-nforce2: No nForce2 chipset. [ 0.884973] cpuidle: using governor ladder [ 0.884976] cpuidle: using governor menu [ 0.884980] EFI Variables Facility v0.08 2004-May-17 [ 0.885476] TCP cubic registered [ 0.885708] NET: Registered protocol family 10 [ 0.886771] NET: Registered protocol family 17 [ 0.886799] Registering the dns_resolver key type [ 0.886837] Using IPI No-Shortcut mode [ 0.887028] PM: Hibernation image not present or could not be loaded. [ 0.887047] registered taskstats version 1 [ 0.902579] Magic number: 12:339:388 [ 0.902592] usb usb6: hash matches [ 0.902687] rtc_cmos 00:03: setting system clock to 2012-05-11 16:23:41 UTC (1336753421) [ 0.903185] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.903189] EDD information not available. [ 1.170710] ata3: SATA link down (SStatus 0 SControl 300) [ 1.181439] ata4: SATA link down (SStatus 0 SControl 300) [ 1.288020] Refined TSC clocksource calibration: 2499.999 MHz. [ 1.288028] Switching to clocksource tsc [ 1.292016] usb 1-5: new high-speed USB device number 3 using ehci_hcd [ 1.486745] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.486762] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.640115] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.640130] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.648342] ata1.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 1.648348] ata1.00: 490234752 sectors, multi 0: LBA48 [ 1.664325] ata1.00: configured for UDMA/133 [ 1.664531] scsi 0:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 1.664745] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 1.664809] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.664838] sd 0:0:0:0: [sda] Write Protect is off [ 1.664843] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.664884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.691699] sda: sda1 sda2 sda3 sda4 [ 1.692348] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.692461] Freeing unused kernel memory: 740k freed [ 1.692820] Write protecting the kernel text: 5828k [ 1.692851] Write protecting the kernel read-only data: 2376k [ 1.692854] NX-protecting the kernel data: 4412k [ 1.723980] udevd[92]: starting version 175 [ 1.865339] Floppy drive(s): fd0 is 1.44M [ 1.865429] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.865478] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 1.867875] sky2: driver version 1.30 [ 1.867926] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.867942] sky2 0000:04:00.0: setting latency timer to 64 [ 1.867979] sky2 0000:04:00.0: Yukon-2 EC chip revision 2 [ 1.868111] sky2 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.868174] scsi4 : pata_jmicron [ 1.869802] sky2 0000:04:00.0: eth0: addr 00:01:29:a4:16:0a [ 1.869828] scsi5 : pata_jmicron [ 1.869943] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16 [ 1.869949] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16 [ 1.880053] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 1.884052] FDC 0 is a post-1991 82077 [ 2.032611] ata5.00: ATAPI: _NEC DVD+/-RW ND-3450A, 103C, max UDMA/33 [ 2.048585] ata5.00: configured for UDMA/33 [ 2.049777] scsi 4:0:0:0: CD-ROM _NEC DVD+-RW ND-3450A 103C PQ: 0 ANSI: 5 [ 2.051048] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.051054] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.051283] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.051483] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.079838] usbcore: registered new interface driver usbhid [ 2.079844] usbhid: USB HID core driver [ 2.236660] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.150230] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.177342] udevd[333]: starting version 175 [ 12.195524] Adding 417684k swap on /dev/sda2. Priority:-1 extents:1 across:417684k [ 12.278032] lp: driver loaded but no devices found [ 12.516456] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input2 [ 12.520297] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input2 [ 12.520753] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:1a.1-1:1 [ 12.523286] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input3 [ 12.524439] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1a.1-1:2 [ 12.545746] type=1400 audit(1336771433.137:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=502 comm="apparmor_parser" [ 12.546574] type=1400 audit(1336771433.137:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser" [ 12.547034] type=1400 audit(1336771433.137:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser" [ 12.626869] Linux video capture interface: v2.00 [ 12.649104] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081a) [ 12.668665] input: UVC Camera (046d:081a) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input4 [ 12.668909] usbcore: registered new interface driver uvcvideo [ 12.668914] USB Video Class driver (1.1.1) [ 12.697645] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.697721] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 12.697760] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 12.706772] nvidia: module license 'NVIDIA' taints kernel. [ 12.706778] Disabling lock debugging due to kernel taint [ 12.735428] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.350252] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.350267] nvidia 0000:01:00.0: setting latency timer to 64 [ 13.350275] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 13.351464] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012 [ 13.356785] hda_codec: ALC889A: BIOS auto-probing. [ 13.357267] init: failsafe main process (658) killed by TERM signal [ 13.372756] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 13.373173] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 13.373568] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 13.373954] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 13.374339] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 13.374715] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 13.375109] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 13.375724] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 13.475252] type=1400 audit(1336771434.065:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=735 comm="apparmor_parser" [ 13.477026] type=1400 audit(1336771434.069:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser" [ 13.477695] type=1400 audit(1336771434.069:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser" [ 13.479048] type=1400 audit(1336771434.069:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=734 comm="apparmor_parser" [ 13.488994] type=1400 audit(1336771434.081:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=738 comm="apparmor_parser" [ 13.489972] type=1400 audit(1336771434.081:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=738 comm="apparmor_parser" [ 13.

  Read the article

• Virtual host is not working in Ubuntu 14 VPS using XAMPP 1.8.3

  - by viral4ever

  I am using XAMPP as server in ubuntu 14.04 VPS of digitalocean. I tried to setup virtual hosts. But it is not working and I am getting 403 error of access denied. I changed files too. My files with changes are /opt/lampp/etc/httpd.conf # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/trunk/> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/trunk/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so 'log/access_log' # with ServerRoot set to '/www' will be interpreted by the # server as '/www/log/access_log', where as '/log/access_log' will be # interpreted as '/log/access_log'. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used. If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # ServerRoot "/opt/lampp" # # Mutex: Allows you to set the mutex mechanism and mutex file directory # for individual mutexes, or change the global defaults # # Uncomment and change the directory if mutexes are file-based and the default # mutex file directory is not on a local disk or is not appropriate for some # other reason. # # Mutex default:logs # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule authn_socache_module modules/mod_authn_socache.so LoadModule authn_core_module modules/mod_authn_core.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_dbd_module modules/mod_authz_dbd.so LoadModule authz_core_module modules/mod_authz_core.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule access_compat_module modules/mod_access_compat.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_form_module modules/mod_auth_form.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule allowmethods_module modules/mod_allowmethods.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule cache_module modules/mod_cache.so LoadModule cache_disk_module modules/mod_cache_disk.so LoadModule socache_shmcb_module modules/mod_socache_shmcb.so LoadModule socache_dbm_module modules/mod_socache_dbm.so LoadModule socache_memcache_module modules/mod_socache_memcache.so LoadModule dbd_module modules/mod_dbd.so LoadModule bucketeer_module modules/mod_bucketeer.so LoadModule dumpio_module modules/mod_dumpio.so LoadModule echo_module modules/mod_echo.so LoadModule case_filter_module modules/mod_case_filter.so LoadModule case_filter_in_module modules/mod_case_filter_in.so LoadModule buffer_module modules/mod_buffer.so LoadModule ratelimit_module modules/mod_ratelimit.so LoadModule reqtimeout_module modules/mod_reqtimeout.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule request_module modules/mod_request.so LoadModule include_module modules/mod_include.so LoadModule filter_module modules/mod_filter.so LoadModule substitute_module modules/mod_substitute.so LoadModule sed_module modules/mod_sed.so LoadModule charset_lite_module modules/mod_charset_lite.so LoadModule deflate_module modules/mod_deflate.so LoadModule mime_module modules/mod_mime.so LoadModule ldap_module modules/mod_ldap.so LoadModule log_config_module modules/mod_log_config.so LoadModule log_debug_module modules/mod_log_debug.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule version_module modules/mod_version.so LoadModule remoteip_module modules/mod_remoteip.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so LoadModule proxy_scgi_module modules/mod_proxy_scgi.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_express_module modules/mod_proxy_express.so LoadModule session_module modules/mod_session.so LoadModule session_cookie_module modules/mod_session_cookie.so LoadModule session_dbd_module modules/mod_session_dbd.so LoadModule slotmem_shm_module modules/mod_slotmem_shm.so LoadModule ssl_module modules/mod_ssl.so LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so LoadModule unixd_module modules/mod_unixd.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule suexec_module modules/mod_suexec.so LoadModule cgi_module modules/mod_cgi.so LoadModule cgid_module modules/mod_cgid.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so <IfDefine JUSTTOMAKEAPXSHAPPY> LoadModule php4_module modules/libphp4.so LoadModule php5_module modules/libphp5.so </IfDefine> <IfModule unixd_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User root Group www </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:@@Port@@ # XAMPP ServerName localhost # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # <Directory> blocks below. # <Directory /> AllowOverride none Require all denied </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/opt/lampp/htdocs" <Directory "/opt/lampp/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/trunk/mod/core.html#options # for more information. # #Options Indexes FollowSymLinks # XAMPP Options Indexes FollowSymLinks ExecCGI Includes # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # #AllowOverride None # since XAMPP 1.4: AllowOverride All # # Controls who can get stuff from this server. # Require all granted </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> #DirectoryIndex index.html # XAMPP DirectoryIndex index.html index.html.var index.php index.php3 index.php4 </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ".ht*"> Require all denied </Files> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/opt/lampp/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/opt/lampp/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/opt/lampp/cgi-bin"> AllowOverride None Options None Require all granted </Directory> <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig etc/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # XAMPP, since LAMPP 0.9.8: AddHandler cgi-script .cgi .pl # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # # XAMPP AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile etc/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults: EnableMMAP On, EnableSendfile Off # EnableMMAP off EnableSendfile off # Supplemental configuration # # The configuration files in the etc/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include etc/extra/httpd-mpm.conf # Multi-language error messages Include etc/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include etc/extra/httpd-autoindex.conf # Language settings #Include etc/extra/httpd-languages.conf # User home directories #Include etc/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include etc/extra/httpd-info.conf # Virtual hosts Include etc/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include etc/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include etc/extra/httpd-dav.conf # Various default settings Include etc/extra/httpd-default.conf # Configure mod_proxy_html to understand HTML4/XHTML1 <IfModule proxy_html_module> Include etc/extra/proxy-html.conf </IfModule> # Secure (SSL/TLS) connections <IfModule ssl_module> # XAMPP <IfDefine SSL> Include etc/extra/httpd-ssl.conf </IfDefine> </IfModule> # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> # XAMPP Include etc/extra/httpd-xampp.conf Include "/opt/lampp/apache2/conf/httpd.conf" I used command shown in this example. I used below lines to change and add group Add group "groupadd www" Add user to group "usermod -aG www root" Change htdocs group "chgrp -R www /opt/lampp/htdocs" Change sitedir group "chgrp -R www /opt/lampp/htdocs/mysite" Change htdocs chmod "chmod 2775 /opt/lampp/htdocs" Change sitedir chmod "chmod 2775 /opt/lampp/htdocs/mysite" And then I changed my vhosts.conf file # Virtual Hosts # # Required modules: mod_log_config # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.4/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/opt/lampp/docs/dummy-host.example.com" ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog "logs/dummy-host.example.com-error_log" CustomLog "logs/dummy-host.example.com-access_log" common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/opt/lampp/docs/dummy-host2.example.com" ServerName dummy-host2.example.com ErrorLog "logs/dummy-host2.example.com-error_log" CustomLog "logs/dummy-host2.example.com-access_log" common </VirtualHost> NameVirtualHost * <VirtualHost *> ServerAdmin [email protected] DocumentRoot "/opt/lampp/htdocs/mysite" ServerName mysite.com ServerAlias mysite.com ErrorLog "/opt/lampp/htdocs/mysite/errorlogs" CustomLog "/opt/lampp/htdocs/mysite/customlog" common <Directory "/opt/lampp/htdocs/mysite"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order Allow,Deny Allow from all Require all granted </Directory> </VirtualHost> but still its not working and I am getting 403 error on my ip and domain however I can access phpmyadmin. If anyone can help me, please help me.

  Read the article

• Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

  - by smisner

  Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system. The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me. At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach. Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements. My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work. Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way. DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal. Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info: You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client. You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features. I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically. When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions: On the Choose the installation you want page of the installation wizard, I chose Server Farm. On the Server Type page, I chose Complete. At the end of the installation, I did not run the configuration wizard. Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end. It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective. I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed: Install SQL Server 2008 R2 to get a database engine instance installed. Run the SharePoint configuration wizard to set up the SharePoint databases. In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization. Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment. I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon. Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment. I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• CodePlex Daily Summary for Wednesday, October 10, 2012

  CodePlex Daily Summary for Wednesday, October 10, 2012Popular ReleasesA C# 4.0 Push Notification Helper Library for WP7.0 & WP7.1: Easy Notification 1.0.0: New Feature - Send Tile, Toast & Raw Notifications to Windows Phone Devices. New Feature - Supports Windows Phone 7.0 & Windows Phone 7.1. New Feature - Validation rules are in-built for Push Notification Messages. New Feature - Strongly typed interfaces. New Feature - Supports synchronous & asynchronous methods to send notifications. New Feature - Supports authenticated notifications using X509 Certificates. New Feature - Supports Callback Registration Requests. New Feature - S...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Online Image Editor: Online Image Editor v1.1: If you have problems with this tool, please email me at amisouvikdas@gmail.com or You can also participate this project to improve this.Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.69: Fix for issue #18766: build task should not build the output if it's newer than all the input files. Fix for Issue #18764: build taks -res switch not working. update build task to concatenate input source and then minify, rather than minify and then concatenate. include resource string-replacement root name in the assumed globals list. Stop replacing new Date().getTime() with +new Date -- the latter is smaller, but turns out it executes up to 45% slower. add CSS support for single-...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...DevLib: 69721 binary dll: 69721 binary dllVidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...DotNetNuke Boards: 01.00.00: This beta release represents the end of training session 1, based on jQuery and Knockout integration in DotNetNuke 6.2.3. It is designed to allow a single user or multiple users to add/edit/delete cards but no cards can be assigned to anyone at this point. This release is not intended for production use!Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.JSLint for Visual Studio 2010: 1.4.2: 1.4.2patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...New Projectsadcc2: adccAP.Framework: This a asp.net mvc3 of test web site .EFCodeFirst: Projeto criado para experimentos e estudos com o Entity FrameworkEXPS-RAT: HelloFiskalizacija za developere: Projekt je namijenjen razvojnim inženjerima, programerima, developerima i svima ostalima koji se bave razvojem programskih rješenja za fiskalne blagajne.Galleriffic App for SharePoint 2013: Galleriffic App is an app part for SharePoint 2013 to display a picture gallery with cool JQuery animations and effects. Hack.net: Hack.net is a Roguelike clone similar to NetHack or Roguelike.Inno Setup For .NET Application: This is a simple inno setup for .net developerJava Special Functions Library: Java Special Functions Library implemented as a public class part of my larger mathematical package.LocalFileOpener: The LocalFileOpener plugin opens an intent to help you easily open local files on the device under installed applications.localizr - .NET Collaborative Translation & Localization: Localizr is a platform for collaborative localization and translation of .NET projects.Metro UI CSS: Metro UI CSS a set of styles to create a site with an interface similar to Windows 8 Metro UI. MoskieDotNet: A sandbox for me learn some new technologies.Mouse Automation: Allows a user to automate repetitive clicking within EverQuestMS SQL DB Schema Updater: Simple tool for updating MS SQL database schema based on "ideal" database model.n8design Tools: Tools any Source Code by Stefan Bauer.NasosCS: ???? ?? ??????Pokemonochan: ALright this is a Pokemon MMo bound to come out someday!PotatoSoft: ?????????????!Power Mirrors: Leverage the usefulness of SQL Server mirrors using PowerShell and SMO. Create mirrors from scratch, assign witnesses and test failovers, all from PowerShell! Project13251010: sdfdReal Time Data Bus: A collection of real time data bus implementations.Ricky Tailor's ASP.NET Web 2.0 Project: 7COM0203 Web Scripting And Content Creation Task 1. SampleTFS2: Sample Projectslotcarduino - An Arduino based slotcar timing project: Slotcar timing project based on Arduino Uno/Mega 2560. Standalone system with serial enabled graphic display.System.Data.Entity.Repository: Entity framework code first framework wrapper with support for generic repository pattern, N-Tier application and Transaction Management for rapid developmentTest Marron: This project is a test to explore codeplexTmib Video Downloader: A small youtube video downloader. Created in C#Web Scripting & Content Creation: Fhame Rashid MSc Software Engineering Module Log: Web-Scripting and Content Creationwebbase: webbaseWebScriptingandContentCreation: This project is for the MSc module Web Scripting and Content Creation.Zuordnung: Zuordnung

  Read the article

• Drivers for NVIDIA 520M not working in Ubuntu 12.04

  - by Don

  I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

  Read the article

• CodePlex Daily Summary for Tuesday, May 29, 2012

  CodePlex Daily Summary for Tuesday, May 29, 2012Popular ReleasesDotNetNuke Azure Accelerator: DotNetNuke Azure Accelerator 6.2: Windows Azure deployments of DotNetNuke Community using virtual hard drive (cloud-drive) image that is created dynamically on the cloud. Enables the creation of new DotNetNuke host instances from on-premise to the cloud using a wizard that guides you on this process, creating the SQL Azure database, uploading the solution engine and associated service configurations. New features in this releaseModified the web roles endpoints to allow traffic on port 443 Changed the package unzip operati...Thales Simulator Library: Version 0.9.6: The Thales Simulator Library is an implementation of a software emulation of the Thales (formerly Zaxus & Racal) Hardware Security Module cryptographic device. This release fixes a problem with the FK command and a bug in the implementation of PIN block 05 format deconstruction. A new 0.9.6.Binaries file has been posted. This includes executable programs without an installer, including the GUI and console simulators, the key manager and the PVV clashing demo. Please note that you will need ...myManga: myManga v1.0.0.2: Fixed the 'Lost+Brain' error on MangaReader. The main download has this update. The second download is for those who have already downloaded the old v1.0.0.2. DELETE OLD EXE and DLLs before you copy the new files over.To update from v1.0.0.1:Extract new myManga EXE and DLLs from Zip to folder of choosing. Copy MangaInfo and MangaArchives folder from old myManga folder to new folder from step 1. ORDelete: The new myManga.exe contains the CoreMangaClasses.dll and Manga.dll internally. Delet...????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...Indent Guides for Visual Studio: Indent Guides v12: Version History Changed in v12: background document analysis new options dialog with Quick Set selections for behavior new "glow" style for guides new menu icon in VS 11 preview control now uses editor theming highlighting can be customised on each line fixed issues with collapsed code blocks improved behaviour around left-aligned pragma/preprocessor commands (C#/C++) new settings for controlling guides in empty lines restructured settings storage (should be more reliable) ...callisto: callisto 2.0.29: Added DNS functionality to scripting. See documentation section for details of how to incorporate this into your scripts.ZXMAK2: Version 2.6.2.2: - implemented read port #7FFD glitch for ULA128 (fusetest) - fix unhandled exception inside open dialog - fix Z80 format serializer (support 55 bytes header & non compressed 128 blocks - thanks to Ralf) This release include SPRINTER emulation, but boot system disk image was removed.Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...ScreenShot: InstallScreenShot: This is the current stable release.????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ????SDK for .Net 4.X???????PHP?SDK???OAuth??API???Client???。 ??????API?? ???????OAuth2.0???? ???：????????，DEMO??AppKey????????????????，?????AppKey，????AppKey???????????，?????“????>????>????>??????”.Net Code Samples: Code Samples: Code samples (SLNs).LINQ_Koans: LinqKoans v.02: Cleaned up a bitExpression Tree Visualizer for VS 2010: Expression Tree Visualizer Beta: This is a beta release, in this release some expression types are not handled and use a default visualization behavior. The first release will be published soon. Wait for it...Ulfi: Ulfi source: Build with Visual Studio 2010 Express C# or betterJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 2: JayData is a unified data access library for JavaScript developers to query and update data from different sources like webSQL, indexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video: http://www.youtube.com/watch?v=LlJHgj1y0CU RC1 R2 Release highlights Knockout.js integrationUsing the Knockout.js module, your UI can be automatically refreshed when the data model changes, so you can develop the front-end of your data manager app even faster. Querying 1:N relations in W...Christoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.New ProjectsActive Log Reader: The active log reader provides the ability for a client to subscribe to specific changes in a set of files in a directory. For example, it allows you to actively monitor all .log files in your C:\Windows directory (and sub-directories) and callback whenever the word "ERROR" shows up (or any regular expression you can come up with). The accompanying test project outlines example usage.ADO.NET light wrapper: ADO.NET light wrapper is thin IEnumerable layer about ADO.NET for provide easy way to access data with strong typing support. Allen Neighborhood Center: Allen Neighborhood Center data interactionsCildads: The first attempt at centryCMT: Course Management Tool ProjectCode Builder: this is the Builder project.Connect: this is the Connect project.Craig's Framework: A basic framework that is used to speed up building MVC applications and make certain things simpler.CRM 2011 Fetch XML Execute Tool: This is a dev tool used to execute fetch xml to get the results from the connected CRM 2011 instanceDallasDB: A struct based database. DallasDB will have no full functionality until at least version 0.0.1, and won't be ready for professional use until version 1.0.0. EasyMvc: It provides a trainning sample to develop a web application base on MVC3 EF4.0 SQL Compact 4. Besides, a common business permission, logging, configration have been applied simply. Share with some implement idea about web, mvc, jquery,orm. Appreciate your advice.Entity: this is the Entity project.FogLampz: FogLampz is a .NET wrapper around around the FogBugz API.Geeba: Geeba Forum for Students in BGU UniversityHibernate: this is the Hibernate project.JSense - IntelliSense for JavaScript: JSense provides JavaScript IntelliSense meta-automation for Visual Studio 2010 projectsMichael: this is Michael's project.ModAdder: Minecraft Mod InstallerMVVM ORM: The purpose of MVVM ORM is to create models and their interactions as defined in some database for WPF applications Models are derived from tables, views and stored procedures. Interactions include insert/update/delete, with FK relationships taken into account. nihao: The summary is required.Report: this is the Report project.REST Start Kit for BizTalk: This project enables BizTalk Server to expose RESTFul services through the WCF-Custom adapter. The library supports both receive and send, both XML and JSON with all HTTP verbs (GET, POST, PUT and DELETE). The solution is based on two custom WCF behaviors, one to be used on Receive Locations and one on Send Ports. Hopeully you'll find them easy to use, but if you have any issues, please use the discussions forum.RovignetaWinPhone7: bla bla blaScreenShot: A simple utility that enhances the experience of taking screenshots and annotating them. And all of it happens with the screenshot key that you are most used to. PrintScreen. Give it a try. You will forget the traditional tedious screenshot mechanism.SDM Exam 2012: This is an exam project for 4th semester.Struts: this is the Struts project.TheStoreDepot: depot for the StoreTibiaBot: TibiaBot is an open source application dedicated to extend your gaming experience in MMORPG game called Tibia. Besides of very many built-in functions, TibiaBot has implemented IronRuby script engine, which allows You to creating new functionality to base program.TopicInterDisciplinary: Topic inter-disciplinary owner: sherry, chen1984yangWebAppMatrix: ??WebApp??，?????！

  Read the article

• Juju Openstack bundle: Can't launch an instance

  - by user281985

  Deployed bundle:~makyo/openstack/2/openstack, on top of 7 physical boxes and 3 virtual ones. After changing vip_iface strings to point to right devices, e.g., br0 instead of eth0, and defining "/mnt/loopback|30G", in Cinder's block-device string, am able to navigate through openstack dashboard, error free. Following http://docs.openstack.org/grizzly/openstack-compute/install/apt/content/running-an-instance.html instructions, attempted to launch cirros 0.3.1 image; however, novalist shows the instance in error state. ubuntu@node7:~$ nova --debug boot --flavor 1 --image 28bed1bc-bc1c-4533-beee-8e0428ad40dd --key_name key2 --security_group default cirros REQ: curl -i http://keyStone.IP:5000/v2.0/tokens -X POST -H "Content-Type: application/json" -H "Accept: application/json" -H "User-Agent: python-novaclient" -d '{"auth": {"tenantName": "admin", "passwordCredentials": {"username": "admin", "password": "openstack"}}}' INFO (connectionpool:191) Starting new HTTP connection (1): keyStone.IP DEBUG (connectionpool:283) "POST /v2.0/tokens HTTP/1.1" 200 None RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:02 GMT', 'transfer-encoding': 'chunked', 'vary': 'X-Auth-Token', 'content-type': 'application/json'} RESP BODY: {"access": {"token": {"expires": "2014-06-11T00:01:02Z", "id": "3eefa1837d984426a633fe09259a1534", "tenant": {"description": "Created by Juju", "enabled": true, "id": "08cff06d13b74492b780d9ceed699239", "name": "admin"}}, "serviceCatalog": [{"endpoints": [{"adminURL": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239", "region": "RegionOne", "internalURL": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239", "publicURL": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239"}], "endpoints_links": [], "type": "compute", "name": "nova"}, {"endpoints": [{"adminURL": "http://nova.cloud.controller:9696", "region": "RegionOne", "internalURL": "http://nova.cloud.controller:9696", "publicURL": "http://nova.cloud.controller:9696"}], "endpoints_links": [], "type": "network", "name": "quantum"}, {"endpoints": [{"adminURL": "http://nova.cloud.controller:3333", "region": "RegionOne", "internalURL": "http://nova.cloud.controller:3333", "publicURL": "http://nova.cloud.controller:3333"}], "endpoints_links": [], "type": "s3", "name": "s3"}, {"endpoints": [{"adminURL": "http://i.p.s.36:9292", "region": "RegionOne", "internalURL": "http://i.p.s.36:9292", "publicURL": "http://i.p.s.36:9292"}], "endpoints_links": [], "type": "image", "name": "glance"}, {"endpoints": [{"adminURL": "http://i.p.s.39:8776/v1/08cff06d13b74492b780d9ceed699239", "region": "RegionOne", "internalURL": "http://i.p.s.39:8776/v1/08cff06d13b74492b780d9ceed699239", "publicURL": "http://i.p.s.39:8776/v1/08cff06d13b74492b780d9ceed699239"}], "endpoints_links": [], "type": "volume", "name": "cinder"}, {"endpoints": [{"adminURL": "http://nova.cloud.controller:8773/services/Cloud", "region": "RegionOne", "internalURL": "http://nova.cloud.controller:8773/services/Cloud", "publicURL": "http://nova.cloud.controller:8773/services/Cloud"}], "endpoints_links": [], "type": "ec2", "name": "ec2"}, {"endpoints": [{"adminURL": "http://keyStone.IP:35357/v2.0", "region": "RegionOne", "internalURL": "http://keyStone.IP:5000/v2.0", "publicURL": "http://i.p.s.44:5000/v2.0"}], "endpoints_links": [], "type": "identity", "name": "keystone"}], "user": {"username": "admin", "roles_links": [], "id": "b3730a52a32e40f0a9500440d1ef1c7d", "roles": [{"id": "e020001eb9a049f4a16540238ab158aa", "name": "Admin"}, {"id": "b84fbff4d5554d53bbbffdaad66b56cb", "name": "KeystoneServiceAdmin"}, {"id": "129c8b49d42b4f0796109aaef2069aa9", "name": "KeystoneAdmin"}], "name": "admin"}}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd HTTP/1.1" 200 719 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:03 GMT', 'x-compute-request-id': 'req-7f3459f8-d3d5-47f1-97a3-8407a4419a69', 'content-type': 'application/json', 'content-length': '719'} RESP BODY: {"image": {"status": "ACTIVE", "updated": "2014-06-09T22:17:54Z", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "bookmark"}, {"href": "http://External.Public.Port:9292/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "type": "application/vnd.openstack.image", "rel": "alternate"}], "id": "28bed1bc-bc1c-4533-beee-8e0428ad40dd", "OS-EXT-IMG-SIZE:size": 13147648, "name": "Cirros 0.3.1", "created": "2014-06-09T22:17:54Z", "minDisk": 0, "progress": 100, "minRam": 0, "metadata": {}}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/flavors/1 -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/flavors/1 HTTP/1.1" 200 418 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:04 GMT', 'x-compute-request-id': 'req-2c153110-6969-4f3a-b51c-8f1a6ce75bee', 'content-type': 'application/json', 'content-length': '418'} RESP BODY: {"flavor": {"name": "m1.tiny", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "bookmark"}], "ram": 512, "OS-FLV-DISABLED:disabled": false, "vcpus": 1, "swap": "", "os-flavor-access:is_public": true, "rxtx_factor": 1.0, "OS-FLV-EXT-DATA:ephemeral": 0, "disk": 0, "id": "1"}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers -X POST -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Content-Type: application/json" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" -d '{"server": {"name": "cirros", "imageRef": "28bed1bc-bc1c-4533-beee-8e0428ad40dd", "key_name": "key2", "flavorRef": "1", "max_count": 1, "min_count": 1, "security_groups": [{"name": "default"}]}}' INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "POST /v1.1/08cff06d13b74492b780d9ceed699239/servers HTTP/1.1" 202 436 RESP: [202] {'date': 'Tue, 10 Jun 2014 00:01:05 GMT', 'x-compute-request-id': 'req-41e53086-6454-4efb-bb35-a30dc2c780be', 'content-type': 'application/json', 'location': 'http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43', 'content-length': '436'} RESP BODY: {"server": {"security_groups": [{"name": "default"}], "OS-DCF:diskConfig": "MANUAL", "id": "2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "rel": "bookmark"}], "adminPass": "oFRbvRqif2C8"}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43 -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43 HTTP/1.1" 200 1349 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:05 GMT', 'x-compute-request-id': 'req-d91d0858-7030-469d-8e55-40e05e4d00fd', 'content-type': 'application/json', 'content-length': '1349'} RESP BODY: {"server": {"status": "BUILD", "updated": "2014-06-10T00:01:05Z", "hostId": "", "OS-EXT-SRV-ATTR:host": null, "addresses": {}, "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "rel": "bookmark"}], "key_name": "key2", "image": {"id": "28bed1bc-bc1c-4533-beee-8e0428ad40dd", "links": [{"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "bookmark"}]}, "OS-EXT-STS:task_state": "scheduling", "OS-EXT-STS:vm_state": "building", "OS-EXT-SRV-ATTR:instance_name": "instance-00000004", "OS-EXT-SRV-ATTR:hypervisor_hostname": null, "flavor": {"id": "1", "links": [{"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "bookmark"}]}, "id": "2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "security_groups": [{"name": "default"}], "OS-EXT-AZ:availability_zone": "nova", "user_id": "b3730a52a32e40f0a9500440d1ef1c7d", "name": "cirros", "created": "2014-06-10T00:01:04Z", "tenant_id": "08cff06d13b74492b780d9ceed699239", "OS-DCF:diskConfig": "MANUAL", "accessIPv4": "", "accessIPv6": "", "progress": 0, "OS-EXT-STS:power_state": 0, "config_drive": "", "metadata": {}}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/flavors/1 -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/flavors/1 HTTP/1.1" 200 418 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:05 GMT', 'x-compute-request-id': 'req-896c0120-1102-4408-9e09-cd628f2dd699', 'content-type': 'application/json', 'content-length': '418'} RESP BODY: {"flavor": {"name": "m1.tiny", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "bookmark"}], "ram": 512, "OS-FLV-DISABLED:disabled": false, "vcpus": 1, "swap": "", "os-flavor-access:is_public": true, "rxtx_factor": 1.0, "OS-FLV-EXT-DATA:ephemeral": 0, "disk": 0, "id": "1"}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd HTTP/1.1" 200 719 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:05 GMT', 'x-compute-request-id': 'req-454e9651-c247-4d31-8049-6b254de050ae', 'content-type': 'application/json', 'content-length': '719'} RESP BODY: {"image": {"status": "ACTIVE", "updated": "2014-06-09T22:17:54Z", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "bookmark"}, {"href": "http://External.Public.Port:9292/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "type": "application/vnd.openstack.image", "rel": "alternate"}], "id": "28bed1bc-bc1c-4533-beee-8e0428ad40dd", "OS-EXT-IMG-SIZE:size": 13147648, "name": "Cirros 0.3.1", "created": "2014-06-09T22:17:54Z", "minDisk": 0, "progress": 100, "minRam": 0, "metadata": {}}} +-------------------------------------+--------------------------------------+ | Property | Value | +-------------------------------------+--------------------------------------+ | OS-EXT-STS:task_state | scheduling | | image | Cirros 0.3.1 | | OS-EXT-STS:vm_state | building | | OS-EXT-SRV-ATTR:instance_name | instance-00000004 | | flavor | m1.tiny | | id | 2eb5e3ad-3044-41c1-bbb7-10f398f83e43 | | security_groups | [{u'name': u'default'}] | | user_id | b3730a52a32e40f0a9500440d1ef1c7d | | OS-DCF:diskConfig | MANUAL | | accessIPv4 | | | accessIPv6 | | | progress | 0 | | OS-EXT-STS:power_state | 0 | | OS-EXT-AZ:availability_zone | nova | | config_drive | | | status | BUILD | | updated | 2014-06-10T00:01:05Z | | hostId | | | OS-EXT-SRV-ATTR:host | None | | key_name | key2 | | OS-EXT-SRV-ATTR:hypervisor_hostname | None | | name | cirros | | adminPass | oFRbvRqif2C8 | | tenant_id | 08cff06d13b74492b780d9ceed699239 | | created | 2014-06-10T00:01:04Z | | metadata | {} | +-------------------------------------+--------------------------------------+ ubuntu@node7:~$ ubuntu@node7:~$ nova list +--------------------------------------+--------+--------+----------+ | ID | Name | Status | Networks | +--------------------------------------+--------+--------+----------+ | 2eb5e3ad-3044-41c1-bbb7-10f398f83e43 | cirros | ERROR | | +--------------------------------------+--------+--------+----------+ ubuntu@node7:~$ var/log/nova/nova-compute.log shows the following error: ... 2014-06-10 00:01:06.048 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Attempting claim: memory 512 MB, disk 0 GB, VCPUs 1 2014-06-10 00:01:06.049 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Total Memory: 3885 MB, used: 512 MB 2014-06-10 00:01:06.049 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Memory limit: 5827 MB, free: 5315 MB 2014-06-10 00:01:06.049 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Total Disk: 146 GB, used: 0 GB 2014-06-10 00:01:06.050 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Disk limit not specified, defaulting to unlimited 2014-06-10 00:01:06.050 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Total CPU: 2 VCPUs, used: 0 VCPUs 2014-06-10 00:01:06.050 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] CPU limit not specified, defaulting to unlimited 2014-06-10 00:01:06.051 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Claim successful 2014-06-10 00:01:06.963 WARNING nova.network.quantumv2.api [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] No network configured! 2014-06-10 00:01:08.347 ERROR nova.compute.manager [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Instance failed to spawn 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Traceback (most recent call last): 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 1118, in _spawn 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] self._legacy_nw_info(network_info), 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 703, in _legacy_nw_info 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] network_info = network_info.legacy() 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] AttributeError: 'list' object has no attribute 'legacy' 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] 2014-06-10 00:01:08.919 AUDIT nova.compute.manager [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Terminating instance 2014-06-10 00:01:09.712 32223 ERROR nova.virt.libvirt.driver [-] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] During wait destroy, instance disappeared. 2014-06-10 00:01:09.718 INFO nova.virt.libvirt.firewall [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Attempted to unfilter instance which is not filtered 2014-06-10 00:01:09.719 INFO nova.virt.libvirt.driver [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Deleting instance files /var/lib/nova/instances/2eb5e3ad-3044-41c1-bbb7-10f398f83e43 2014-06-10 00:01:10.044 ERROR nova.compute.manager [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Error: ['Traceback (most recent call last):\n', ' File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 864, in _run_instance\n set_access_ip=set_access_ip)\n', ' File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 1123, in _spawn\n LOG.exception(_(\'Instance failed to spawn\'), instance=instance)\n', ' File "/usr/lib/python2.7/contextlib.py", line 24, in __exit__\n self.gen.next()\n', ' File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 1118, in _spawn\n self._legacy_nw_info(network_info),\n', ' File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 703, in _legacy_nw_info\n network_info = network_info.legacy()\n', "AttributeError: 'list' object has no attribute 'legacy'\n"] 2014-06-10 00:01:40.951 32223 AUDIT nova.compute.resource_tracker [-] Auditing locally available compute resources 2014-06-10 00:01:41.072 32223 AUDIT nova.compute.resource_tracker [-] Free ram (MB): 2861 2014-06-10 00:01:41.072 32223 AUDIT nova.compute.resource_tracker [-] Free disk (GB): 146 2014-06-10 00:01:41.073 32223 AUDIT nova.compute.resource_tracker [-] Free VCPUS: 1 2014-06-10 00:01:41.262 32223 INFO nova.compute.resource_tracker [-] Compute_service record updated for node5:node5.maas ... Can't seem to find any entries in quantum.conf related to "legacy". Any help would be appreciated. Cheers,

  Read the article

• CodePlex Daily Summary for Saturday, November 02, 2013

  CodePlex Daily Summary for Saturday, November 02, 2013Popular ReleasesWsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'COmputer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...CodeGen Code Generator: CodeGen 4.3.2: Changes in this release include: Removed old tag tokens from several example templates. Fixed a bug which was causing the default author and company names not to be picked up from the registry under .NET. Added several additional tag loop expressions: <IF FIRST_TAG>, <IF LAST_TAG>, <IF MULTIPLE_TAGS> and<IF SINGLE_TAG>. Upgraded to Synergy/DE 10.1.1b, Visual Studio 2013 and Installshield Limited Edition 2013.Community Forums NNTP bridge: Community Forums NNTP Bridge V54 (LiveConnect): This is the first release which can be used with the new LiveConnect authentication. Fixes the problem that the authentication will not work after 1 hour. Also a logfile will now be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt".Aricie - Friendlier Url Provider: Aricie - Friendlier Url Provider Version 2.5.3: This is mainly a maintenance release to stabilize the new Url Group paradigm. As usual, don't forget to install the Aricie - Shared extension first Highlights Fixed: UI bugs Min Requirements: .Net 3.5+ DotNetNuke 4.8.1+ Aricie - Shared 1.7.7+Aricie Shared: Aricie.Shared Version 1.7.7: This is mainly a maintenance version. Fixes in Property Editor: list import/export Min Requirements: DotNetNuke 4.8.1+ .Net 3.5+WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.9 binaries: Fixed issue with ICollectionView containg null values (AutoFilter issue)Community TFS Build Extensions: October 2013: The October 2013 release contains Scripts - a new addition to our delivery. These are a growing library of PowerShell scripts to use with VS2013. See our documentation for more on scripting. VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 Community TFS Build Manager VS2013 The Community TFS Build Managers for VS2010, 2012 and 2013 can also be found in the Visual Studio Gallery where upda...SuperSocket, an extensible socket server framework: SuperSocket 1.6 stable: Changes included in this release: Process level isolation SuperSocket ServerManager (include server and client) Connect to client from server side initiatively Client certificate validation New configuration attributes "textEncoding", "defaultCulture", and "storeLocation" (certificate node) Many bug fixes http://docs.supersocket.net/v1-6/en-US/New-Features-and-Breaking-ChangesBarbaTunnel: BarbaTunnel 8.1: Check Version History for more information about this release.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.1: v 2.1 Added the 'Should' class instead of the 'Validate' class. The 'Validate' class is now obsolete. Added 'Toolkit.Annotations' to support the Mugen MVVM Toolkit ReSharper plugin. Updated JetBrains annotations within the project. Added the 'GlobalSettings.DefaultActivationPolicy' property to represent the default activation policy. Removed the 'GetSettings' method from the 'ViewModelBase' class. Instead of it, the 'GlobalSettings.DefaultViewModelSettings' property is used. Updated...NAudio: NAudio 1.7: full release notes available at http://mark-dot-net.blogspot.co.uk/2013/10/naudio-17-release-notes.htmlDirectX Tool Kit: October 2013: October 28, 2013 Updated for Visual Studio 2013 and Windows 8.1 SDK RTM Added DGSLEffect, DGSLEffectFactory, VertexPositionNormalTangentColorTexture, and VertexPositionNormalTangentColorTextureSkinning Model loading and effect factories support loading skinned models MakeSpriteFont now has a smooth vs. sharp antialiasing option: /sharp Model loading from CMOs now handles UV transforms for texture coordinates A number of small fixes for EffectFactory Minor code and project cleanup ...ExtJS based ASP.NET Controls: FineUI v4.0beta1: +2013-10-28 v4.0 beta1 +?????Collapsed???????????????。 -????：window/group_panel.aspx??，???????，???????，?????????。 +??????SelectedNodeIDArray???????????????。 -????：tree/checkbox/tree_checkall.aspx??，?????，?????，????????????。 -??TimerPicker???????（????、????ing）。 -??????????????????????（???）。 -?????????????，??type=text/css（??~`）。 -MsgTarget???MessageTarget，???None。 -FormOffsetRight?????20px??5px。 -?Web.config?PageManager??FormLabelAlign???。 -ToolbarPosition??Left/Right。 -??Web.conf...CODE Framework: 4.0.31028.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.VidCoder: 1.5.10 Beta: Broke out all the encoder-specific passthrough options into their own dropdown. This should make what they do a bit more clear and clean up the codec list a bit. Updated HandBrake core to SVN 5855.Indent Guides for Visual Studio: Indent Guides v14: ImportantThis release has a separate download for Visual Studio 2010. The first link is for VS 2012 and later. Version History Changed in v14 Improved performance when scrolling and editing Fixed potential crash when Resharper is installed Fixed highlight of guides split around pragmas in C++/C# Restored VS 2010 support as a separate download Changed in v13 Added page width guide lines Added guide highlighting options Fixed guides appearing over collapsed blocks Fixed guides not...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.3 (mvc5): version 3.5.3 - support for mvc5 version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 ========================== - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js...Media Companion: Media Companion MC3.585b: IMDB plot scraping Fixed. New* Movie - Rename Folder using Movie Set, option to move ignored articles to end of Movie Set, only for folder renaming. Fixed* Media Companion - Fixed if using profiles, config files would blown up in size due to some settings duplicating. * Ignore Article of An was cutting of last character of movie title. * If Rescraping title, sort title changed depending on 'Move article to end of Sort Title' setting. * Movie - If changing Poster source order, list would beco...New ProjectsCarTrade.dk: program that will help make it easier for cardealers to do trade cars amongst themselvesCMSPORTAL: Nothing CruxOMatic Contributions: Crux-O-Matic-Contrib is the contribution project where the Crux-O-Matic community can contribute Crux-O-Matic components and extenders.Dynamics CRM 2013 Easy Solution Importer: Dynamics CRM 2013 Easy Solution ImporterGlobal Excel Automation PowerShell Library: The goal of the library is to automate common infrastructure tasks.HappyBin AutoUpdater: HappyBin is an auto-updater for .NET apps. It is designed as an api, and can be used as a boot-strap or a passive updater. Every app deserves a HappyBin!HashTag WCF Membership and Role Provider: Membership provider for using WCF to connect to a hosted membership endpont. Also includes comprehensive tests for custom membership and role providers.Luwx-Mobile-Store: Xây d?ng trang web bán di?n tho?i trên MVC4Pokémon Bank Online: Pokémon Bank for PBO/POQuickMatch Game: CLI multiplayer game on a single console.seizyUtils: SQL Mapping For Windows Embedded Compact SharePoint 2013 Global Metadata Navigation: Deploy your SharePoint 2013 Managed Metadata navigation term set to an unlimited number of site collections using JQuery, SCOM, CSS, and a custom master page.Simple ASP.NET MVC 3: a simple blog - Guest: view posts and add comments. - Admin: view, edit, delete posts and delete comments. User must be log in.SPRepository: SPRepository aims to be a generic Repository Design Pattern implementation for accessing SharePoint objects (but is not inherently SP).WebSocket Security: WebSocket SecutrityWildfire Ttraining Server: Server for application that tracks Wildfire around the world??? ???? 2013: ??????? ? ?????? ????? ???????????? 2013

  Read the article

• Ubuntu 12.04 OpenCL with Intel and Radeon?

  - by Steve

  I want to setup my Ubuntu 12.04 with OpenCL(Open Computing Language) support for i7 2600k and Radeon HD5870. My Monitor is connected to the integrated Graphics of the i7. Intel OpenCL SDK is installed and working. Iteration of avaliable OpenCL devices shows 2 entries for Intel. As recommended I installed AMD APP SDK 2.6 first and then the fglrx driver. I installed fglrx from Ubuntu repositories. This works fine till here. When I run aticonfig --inital -f and restart the system I get into trouble. Xorg starts only in low-graphics mode. cat /var/log/Xorg.0.log [ 21.201] X.Org X Server 1.12.2 Release Date: 2012-05-29 [ 21.201] X Protocol Version 11, Revision 0 [ 21.201] Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu [ 21.201] Current Operating System: Linux chimera 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_ [ 21.201] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=c137757b-486b-4514-9dfe-00c97662 [ 21.201] Build Date: 05 June 2012 08:35:55AM [ 21.201] xorg-server 2:1.12.2+git20120605+server-1.12-branch.aaf48906-0ubuntu0ricotz~precise (For technical suppor [ 21.201] Current version of pixman: 0.26.0 [ 21.201] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.201] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.201] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 14:22:36 2012 [ 21.247] (==) Using config file: "/etc/X11/xorg.conf" [ 21.247] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.450] (==) ServerLayout "aticonfig Layout" [ 21.450] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 21.450] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 21.451] (**) | |-->Device "aticonfig-Device[0]-0" [ 21.451] (==) Automatically adding devices [ 21.451] (==) Automatically enabling devices [ 21.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 21.473] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib [ 21.473] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.473] (II) Loader magic: 0x7f0ad3b9ab00 [ 21.473] (II) Module ABI versions: [ 21.473] X.Org ANSI C Emulation: 0.4 [ 21.473] X.Org Video Driver: 12.0 [ 21.473] X.Org XInput driver : 16.0 [ 21.473] X.Org Server Extension : 6.0 [ 21.473] (--) PCI:*(0:0:2:0) 8086:0122:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xe0000000/268435456, I/O @ 0x00 [ 21.473] (--) PCI: (0:1:0:0) 1002:6898:1787:2289 rev 0, Mem @ 0xd0000000/268435456, 0xfbdc0000/131072, I/O @ 0x000 [ 21.473] (II) Open ACPI successful (/var/run/acpid.socket) [ 21.473] (II) "extmod" will be loaded by default. [ 21.473] (II) "dbe" will be loaded by default. [ 21.473] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 21.473] (II) "record" will be loaded by default. [ 21.473] (II) "dri" will be loaded by default. [ 21.473] (II) "dri2" will be loaded by default. [ 21.473] (II) LoadModule: "glx" [ 21.732] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libgl [ 21.934] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 21.934] compiled for 6.9.0, module version = 1.0.0 [ 21.934] (II) Loading extension GLX [ 21.934] (II) LoadModule: "extmod" [ 22.028] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 22.041] (II) Module extmod: vendor="X.Org Foundation" [ 22.041] compiled for 1.12.2, module version = 1.0.0 [ 22.041] Module class: X.Org Server Extension [ 22.041] ABI class: X.Org Server Extension, version 6.0 [ 22.041] (II) Loading extension MIT-SCREEN-SAVER [ 22.041] (II) Loading extension XFree86-VidModeExtension [ 22.041] (II) Loading extension XFree86-DGA [ 22.041] (II) Loading extension DPMS [ 22.041] (II) Loading extension XVideo [ 22.041] (II) Loading extension XVideo-MotionCompensation [ 22.041] (II) Loading extension X-Resource [ 22.041] (II) LoadModule: "dbe" [ 22.041] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 22.066] (II) Module dbe: vendor="X.Org Foundation" [ 22.066] compiled for 1.12.2, module version = 1.0.0 [ 22.066] Module class: X.Org Server Extension [ 22.066] ABI class: X.Org Server Extension, version 6.0 [ 22.066] (II) Loading extension DOUBLE-BUFFER [ 22.066] (II) LoadModule: "record" [ 22.066] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 22.077] (II) Module record: vendor="X.Org Foundation" [ 22.077] compiled for 1.12.2, module version = 1.13.0 [ 22.077] Module class: X.Org Server Extension [ 22.077] ABI class: X.Org Server Extension, version 6.0 [ 22.077] (II) Loading extension RECORD [ 22.077] (II) LoadModule: "dri" [ 22.077] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 22.082] (II) Module dri: vendor="X.Org Foundation" [ 22.082] compiled for 1.12.2, module version = 1.0.0 [ 22.082] ABI class: X.Org Server Extension, version 6.0 [ 22.082] (II) Loading extension XFree86-DRI [ 22.082] (II) LoadModule: "dri2" [ 22.082] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 22.083] (II) Module dri2: vendor="X.Org Foundation" [ 22.083] compiled for 1.12.2, module version = 1.2.0 [ 22.083] ABI class: X.Org Server Extension, version 6.0 [ 22.083] (II) Loading extension DRI2 [ 22.083] (II) LoadModule: "fglrx" [ 22.083] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_dr [ 22.399] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 22.399] compiled for 1.4.99.906, module version = 8.96.4 [ 22.399] Module class: X.Org Video Driver [ 22.399] (II) Loading sub module "fglrxdrm" [ 22.399] (II) LoadModule: "fglrxdrm" [ 22.399] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdr [ 22.445] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 22.445] compiled for 1.4.99.906, module version = 8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 22.445] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 22.445] (++) using VT number 7 [ 22.445] (WW) Falling back to old probe method for fglrx [ 23.043] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.082] (--) Chipset Supported AMD Graphics Processor (0x6898) found [ 23.107] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 23.107] (II) fglrx: intel VGA device detected, load intel driver. [ 23.107] (II) LoadModule: "intel" [ 23.211] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.475] (II) Module intel: vendor="X.Org Foundation" [ 23.475] compiled for 1.12.2, module version = 2.19.0 [ 23.475] Module class: X.Org Video Driver [ 23.475] ABI class: X.Org Video Driver, version 12.0 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 23.476] ukiOpenDevice: node name is /dev/ati/card0 [ 23.476] ukiOpenDevice: open result is 8, (OK) [ 23.476] ukiOpenByBusid: ukiOpenMinor returns 8 [ 23.476] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 23.540] (WW) PowerXpress feature is not supported [ 23.540] (EE) No devices detected. [ 23.540] (==) Matched intel as autoconfigured driver 0 [ 23.540] (==) Matched vesa as autoconfigured driver 1 [ 23.540] (==) Matched fbdev as autoconfigured driver 2 [ 23.540] (==) Assigned the driver to the xf86ConfigLayout [ 23.540] (II) LoadModule: "intel" [ 23.540] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.540] (II) Module intel: vendor="X.Org Foundation" [ 23.540] compiled for 1.12.2, module version = 2.19.0 [ 23.540] Module class: X.Org Video Driver [ 23.540] ABI class: X.Org Video Driver, version 12.0 [ 23.540] (II) UnloadModule: "intel" [ 23.540] (II) Unloading intel [ 23.540] (II) Failed to load module "intel" (already loaded, 32522) [ 23.540] (II) LoadModule: "vesa" [ 23.583] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 23.620] (II) Module vesa: vendor="X.Org Foundation" [ 23.620] compiled for 1.12.2, module version = 2.3.1 [ 23.620] Module class: X.Org Video Driver [ 23.620] ABI class: X.Org Video Driver, version 12.0 [ 23.620] (II) LoadModule: "fbdev" [ 23.620] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 23.661] (II) Module fbdev: vendor="X.Org Foundation" [ 23.661] compiled for 1.12.2, module version = 0.4.2 [ 23.661] Module class: X.Org Video Driver [ 23.661] ABI class: X.Org Video Driver, version 12.0 [ 23.661] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 23.661] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 23.661] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 23.661] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2) [ 23.661] (II) VESA: driver for VESA chipsets: vesa [ 23.661] (II) FBDEV: driver for framebuffer: fbdev [ 23.661] (++) using VT number 7 [ 23.661] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 23.661] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 23.661] (WW) Falling back to old probe method for fglrx [ 23.661] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.661] (WW) Falling back to old probe method for vesa [ 23.661] (WW) Falling back to old probe method for fbdev [ 23.661] (EE) No devices detected. [ 23.661] Fatal server error: [ 23.661] no screens found [ 23.661] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 23.661] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 23.661] xorg.conf: cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Is there a way to get the Radeon to work in a hybrid configuration or to use the Radeon as an OpenCL only device?

  Read the article

• usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

  - by Sandro Dzneladze

  I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

  Read the article

• ASMLib

  - by wcoekaer

  Oracle ASMlib on Linux has been a topic of discussion a number of times since it was released way back when in 2004. There is a lot of confusion around it and certainly a lot of misinformation out there for no good reason. Let me try to give a bit of history around Oracle ASMLib. Oracle ASMLib was introduced at the time Oracle released Oracle Database 10g R1. 10gR1 introduced a very cool important new features called Oracle ASM (Automatic Storage Management). A very simplistic description would be that this is a very sophisticated volume manager for Oracle data. Give your devices directly to the ASM instance and we manage the storage for you, clustered, highly available, redundant, performance, etc, etc... We recommend using Oracle ASM for all database deployments, single instance or clustered (RAC). The ASM instance manages the storage and every Oracle server process opens and operates on the storage devices like it would open and operate on regular datafiles or raw devices. So by default since 10gR1 up to today, we do not interact differently with ASM managed block devices than we did before with a datafile being mapped to a raw device. All of this is without ASMLib, so ignore that one for now. Standard Oracle on any platform that we support (Linux, Windows, Solaris, AIX, ...) does it the exact same way. You start an ASM instance, it handles storage management, all the database instances use and open that storage and read/write from/to it. There are no extra pieces of software needed, including on Linux. ASM is fully functional and selfcontained without any other components. In order for the admin to provide a raw device to ASM or to the database, it has to have persistent device naming. If you booted up a server where a raw disk was named /dev/sdf and you give it to ASM (or even just creating a tablespace without asm on that device with datafile '/dev/sdf') and next time you boot up and that device is now /dev/sdg, you end up with an error. Just like you can't just change datafile names, you can't change device filenames without telling the database, or ASM. persistent device naming on Linux, especially back in those days ways to say it bluntly, a nightmare. In fact there were a number of issues (dating back to 2004) : Linux async IO wasn't pretty persistent device naming including permissions (had to be owned by oracle and the dba group) was very, very difficult to manage system resource usage in terms of open file descriptors So given the above, we tried to find a way to make this easier on the admins, in many ways, similar to why we started working on OCFS a few years earlier - how can we make life easier for the admins on Linux. A feature of Oracle ASM is the ability for third parties to write an extension using what's called ASMLib. It is possible for any third party OS or storage vendor to write a library using a specific Oracle defined interface that gets used by the ASM instance and by the database instance when available. This interface offered 2 components : Define an IO interface - allow any IO to the devices to go through ASMLib Define device discovery - implement an external way of discovering, labeling devices to provide to ASM and the Oracle database instance This is similar to a library that a number of companies have implemented over many years called libODM (Oracle Disk Manager). ODM was specified many years before we introduced ASM and allowed third party vendors to implement their own IO routines so that the database would use this library if installed and make use of the library open/read/write/close,.. routines instead of the standard OS interfaces. PolyServe back in the day used this to optimize their storage solution, Veritas used (and I believe still uses) this for their filesystem. It basically allowed, in particular, filesystem vendors to write libraries that could optimize access to their storage or filesystem.. so ASMLib was not something new, it was basically based on the same model. You have libodm for just database access, you have libasm for asm/database access. Since this library interface existed, we decided to do a reference implementation on Linux. We wrote an ASMLib for Linux that could be used on any Linux platform and other vendors could see how this worked and potentially implement their own solution. As I mentioned earlier, ASMLib and ODMLib are libraries for third party extensions. ASMLib for Linux, since it was a reference implementation implemented both interfaces, the storage discovery part and the IO part. There are 2 components : Oracle ASMLib - the userspace library with config tools (a shared object and some scripts) oracleasm.ko - a kernel module that implements the asm device for /dev/oracleasm/* The userspace library is a binary-only module since it links with and contains Oracle header files but is generic, we only have one asm library for the various Linux platforms. This library is opened by Oracle ASM and by Oracle database processes and this library interacts with the OS through the asm device (/dev/asm). It can install on Oracle Linux, on SuSE SLES, on Red Hat RHEL,.. The library itself doesn't actually care much about the OS version, the kernel module and device cares. The support tools are simple scripts that allow the admin to label devices and scan for disks and devices. This way you can say create an ASM disk label foo on, currently /dev/sdf... So if /dev/sdf disappears and next time is /dev/sdg, we just scan for the label foo and we discover it as /dev/sdg and life goes on without any worry. Also, when the database needs access to the device, we don't have to worry about file permissions or anything it will be taken care of. So it's a convenience thing. The kernel module oracleasm.ko is a Linux kernel module/device driver. It implements a device /dev/oracleasm/* and any and all IO goes through ASMLib - /dev/oracleasm. This kernel module is obviously a very specific Oracle related device driver but it was released under the GPL v2 so anyone could easily build it for their Linux distribution kernels. Advantages for using ASMLib : A good async IO interface for the database, the entire IO interface is based on an optimal ASYNC model for performance A single file descriptor per Oracle process, not one per device or datafile per process reducing # of open filehandles overhead Device scanning and labeling built-in so you do not have to worry about messing with udev or devlabel, permissions or the likes which can be very complex and error prone. Just like with OCFS and OCFS2, each kernel version (major or minor) has to get a new version of the device drivers. We started out building the oracleasm kernel module rpms for many distributions, SLES (in fact in the early days still even for this thing called United Linux) and RHEL. The driver didn't make sense to get pushed into upstream Linux because it's unique and specific to the Oracle database. As it takes a huge effort in terms of build infrastructure and QA and release management to build kernel modules for every architecture, every linux distribution and every major and minor version we worked with the vendors to get them to add this tiny kernel module to their infrastructure. (60k source code file). The folks at SuSE understood this was good for them and their customers and us and added it to SLES. So every build coming from SuSE for SLES contains the oracleasm.ko module. We weren't as successful with other vendors so for quite some time we continued to build it for RHEL and of course as we introduced Oracle Linux end of 2006 also for Oracle Linux. With Oracle Linux it became easy for us because we just added the code to our build system and as we churned out Oracle Linux kernels whether it was for a public release or for customers that needed a one off fix where they also used asmlib, we didn't have to do any extra work it was just all nicely integrated. With the introduction of Oracle Linux's Unbreakable Enterprise Kernel and our interest in being able to exploit ASMLib more, we started working on a very exciting project called Data Integrity. Oracle (Martin Petersen in particular) worked for many years with the T10 standards committee and storage vendors and implemented Linux kernel support for DIF/DIX, data protection in the Linux kernel, note to those that wonder, yes it's all in mainline Linux and under the GPL. This basically gave us all the features in the Linux kernel to checksum a data block, send it to the storage adapter, which can then validate that block and checksum in firmware before it sends it over the wire to the storage array, which can then do another checksum and to the actual DISK which does a final validation before writing the block to the physical media. So what was missing was the ability for a userspace application (read: Oracle RDBMS) to write a block which then has a checksum and validation all the way down to the disk. application to disk. Because we have ASMLib we had an entry into the Linux kernel and Martin added support in ASMLib (kernel driver + userspace) for this functionality. Now, this is all based on relatively current Linux kernels, the oracleasm kernel module depends on the main kernel to have support for it so we can make use of it. Thanks to UEK and us having the ability to ship a more modern, current version of the Linux kernel we were able to introduce this feature into ASMLib for Linux from Oracle. This combined with the fact that we build the asm kernel module when we build every single UEK kernel allowed us to continue improving ASMLib and provide it to our customers. So today, we (Oracle) provide Oracle ASMLib for Oracle Linux and in particular on the Unbreakable Enterprise Kernel. We did the build/testing/delivery of ASMLib for RHEL until RHEL5 but since RHEL6 decided that it was too much effort for us to also maintain all the build and test environments for RHEL and we did not have the ability to use the latest kernel features to introduce the Data Integrity features and we didn't want to end up with multiple versions of asmlib as maintained by us. SuSE SLES still builds and comes with the oracleasm module and they do all the work and RHAT it certainly welcome to do the same. They don't have to rebuild the userspace library, it's really about the kernel module. And finally to re-iterate a few important things : Oracle ASM does not in any way require ASMLib to function completely. ASMlib is a small set of extensions, in particular to make device management easier but there are no extra features exposed through Oracle ASM with ASMLib enabled or disabled. Often customers confuse ASMLib with ASM. again, ASM exists on every Oracle supported OS and on every supported Linux OS, SLES, RHEL, OL withoutASMLib Oracle ASMLib userspace is available for OTN and the kernel module is shipped along with OL/UEK for every build and by SuSE for SLES for every of their builds ASMLib kernel module was built by us for RHEL4 and RHEL5 but we do not build it for RHEL6, nor for the OL6 RHCK kernel. Only for UEK ASMLib for Linux is/was a reference implementation for any third party vendor to be able to offer, if they want to, their own version for their own OS or storage ASMLib as provided by Oracle for Linux continues to be enhanced and evolve and for the kernel module we use UEK as the base OS kernel hope this helps.

  Read the article

• Oracle Solaris Zones Physical to virtual (P2V)

  - by user939057

  IntroductionThis document describes the process of creating and installing a Solaris 10 image build from physical system and migrate it into a virtualized operating system environment using the Oracle Solaris 10 Zones Physical-to-Virtual (P2V) capability.Using an example and various scenarios, this paper describes how to take advantage of theOracle Solaris 10 Zones Physical-to-Virtual (P2V) capability with other Oracle Solaris features to optimize performance using the Solaris 10 resource management advanced storage management using Solaris ZFS plus improving operating system visibility with Solaris DTrace. The most common use for this tool is when performing consolidation of existing systems onto virtualization enabled platforms, in addition to that we can use the Physical-to-Virtual (P2V) capability  for other tasks for example backup your physical system and move them into virtualized operating system environment hosted on the Disaster Recovery (DR) site another option can be building an Oracle Solaris 10 image repository with various configuration and a different software packages in order to reduce provisioning time.Oracle Solaris ZonesOracle Solaris Zones is a virtualization and partitioning technology supported on Oracle Sun servers powered by SPARC and Intel processors.This technology provides an isolated and secure environment for running applications. A zone is a virtualized operating system environment created within a single instance of the Solaris 10 Operating System.Each virtual system is called a zone and runs a unique and distinct copy of the Solaris 10 operating system.Oracle Solaris Zones Physical-to-Virtual (P2V)A new feature for Solaris 10 9/10.This feature provides the ability to build a Solaris 10 images from physical system and migrate it into a virtualized operating system environmentThere are three main steps using this tool1. Image creation on the source system, this image includes the operating system and optionally the software in which we want to include within the image. 2. Preparing the target system by configuring a new zone that will host the new image.3. Image installation on the target system using the image we created on step 1. The host, where the image is built, is referred to as the source system and the host, where theimage is installed, is referred to as the target system. Benefits of Oracle Solaris Zones Physical-to-Virtual (P2V)Here are some benefits of this new feature:  Simple- easy build process using Oracle Solaris 10 built-in commands.  Robust- based on Oracle Solaris Zones a robust and well known virtualization technology.  Flexible- support migration between V series servers into T or -M-series systems.For the latest server information, refer to the Sun Servers web page. PrerequisitesThe target Oracle Solaris system should be running the latest version of the patching patch cluster. and the minimum Solaris version on the target system should be Solaris 10 9/10.Refer to the latest Administration Guide for Oracle Solaris for a complete procedure on how todownload and install Oracle Solaris. NOTE: If the source system that used to build the image is an older version then the targetsystem, then during the process, the operating system will be upgraded to Solaris 10 9/10(update on attach).Creating the Image Used to distribute the software.We will create an image on the source machine. We can create the image on the local file system and then transfer it to the target machine, or build it into a NFS shared storage andmount the NFS file system from the target machine.Optional  before creating the image we need to complete the software installation that we want to include with the Solaris 10 image.An image is created by using the flarcreate command:Source # flarcreate -S -n s10-system -L cpio /var/tmp/solaris_10_up9.flarThe command does the following:  -S specifies that we skip the disk space check and do not write archive size data to the archive (faster).  -n specifies the image name.  -L specifies the archive format (i.e cpio). Optionally, we can add descriptions to the archive identification section, which can help to identify the archive later.Source # flarcreate -S -n s10-system -e "Oracle Solaris with Oracle DB10.2.0.4" -a "oracle" -L cpio /var/tmp/solaris_10_up9.flarYou can see example of the archive identification section in Appendix A: archive identification section.We can compress the flar image using the gzip command or adding the -c option to the flarcreate commandSource # gzip /var/tmp/solaris_10_up9.flarAn md5 checksum can be created for the image in order to ensure no data tamperingSource # digest -v -a md5 /var/tmp/solaris_10_up9.flar Moving the image into the target system.If we created the image on the local file system, we need to transfer the flar archive from the source machine to the target machine.Source # scp /var/tmp/solaris_10_up9.flar target:/var/tmpConfiguring the Zone on the target systemAfter copying the software to the target machine, we need to configure a new zone in order to host the new image on that zone.To install the new zone on the target machine, first we need to configure the zone (for the full zone creation options see the following link: http://docs.oracle.com/cd/E18752_01/html/817-1592/index.html  )ZFS integrationA flash archive can be created on a system that is running a UFS or a ZFS root file system.NOTE: If you create a Solaris Flash archive of a Solaris 10 system that has a ZFS root, then bydefault, the flar will actually be a ZFS send stream, which can be used to recreate the root pool.This image cannot be used to install a zone. You must create the flar with an explicit cpio or paxarchive when the system has a ZFS root.Use the flarcreate command with the -L archiver option, specifying cpio or pax as themethod to archive the files. (For example, see Step 1 in the previous section).Optionally, on the target system you can create the zone root folder on a ZFS file system inorder to benefit from the ZFS features (clones, snapshots, etc...).Target # zpool create zones c2t2d0 Create the zone root folder:Target # chmod 700 /zones Target # zonecfg -z solaris10-up9-zonesolaris10-up9-zone: No such zone configuredUse 'create' to begin configuring a new zone.zonecfg:solaris10-up9-zone> createzonecfg:solaris10-up9-zone> set zonepath=/zoneszonecfg:solaris10-up9-zone> set autoboot=truezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone:net> set address=192.168.0.1zonecfg:solaris10-up9-zone:net> set physical=nxge0zonecfg:solaris10-up9-zone:net> endzonecfg:solaris10-up9-zone> verifyzonecfg:solaris10-up9-zone> commitzonecfg:solaris10-up9-zone> exit Installing the Zone on the target system using the imageInstall the configured zone solaris10-up9-zone by using the zoneadm command with the install -a option and the path to the archive.The following example shows how to create an Image and sys-unconfig the zone.Target # zoneadm -z solaris10-up9-zone install -u -a/var/tmp/solaris_10_up9.flarLog File: /var/tmp/solaris10-up9-zone.install_log.AJaGveInstalling: This may take several minutes...The following example shows how we can preserve system identity.Target # zoneadm -z solaris10-up9-zone install -p -a /var/tmp/solaris_10_up9.flar Resource management Some applications are sensitive to the number of CPUs on the target Zone. You need tomatch the number of CPUs on the Zone using the zonecfg command:zonecfg:solaris10-up9-zone>add dedicated-cpuzonecfg:solaris10-up9-zone> set ncpus=16DTrace integrationSome applications might need to be analyzing using DTrace on the target zone, you canadd DTrace support on the zone using the zonecfg command:zonecfg:solaris10-up9-zone>setlimitpriv="default,dtrace_proc,dtrace_user" Exclusive IP stack An Oracle Solaris Container running in Oracle Solaris 10 can have a shared IP stack with the global zone, or it can have an exclusive IP stack (which was released in Oracle Solaris 10 8/07). An exclusive IP stack provides a complete, tunable, manageable and independent networking stack to each zone. A zone with an exclusive IP stack can configure Scalable TCP (STCP), IP routing, IP multipathing, or IPsec. For an example of how to configure an Oracle Solaris zone with an exclusive IP stack, see the following example zonecfg:solaris10-up9-zone set ip-type=exclusivezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone> set physical=nxge0 When the installation completes, use the zoneadm list -i -v options to list the installedzones and verify the status.Target # zoneadm list -i -vSee that the new Zone status is installedID NAME STATUS PATH BRAND IP0 global running / native shared- solaris10-up9-zone installed /zones native sharedNow boot the ZoneTarget # zoneadm -z solaris10-up9-zone bootWe need to login into the Zone order to complete the zone set up or insert a sysidcfg file beforebooting the zone for the first time see example for sysidcfg file in Appendix B: sysidcfg filesectionTarget # zlogin -C solaris10-up9-zoneTroubleshootingIf an installation fails, review the log file. On success, the log file is in /var/log inside the zone. Onfailure, the log file is in /var/tmp in the global zone.If a zone installation is interrupted or fails, the zone is left in the incomplete state. Use uninstall -F to reset the zone to the configured state.Target # zoneadm -z solaris10-up9-zone uninstall -FTarget # zonecfg -z solaris10-up9-zone delete -FConclusionOracle Solaris Zones P2V tool provides the flexibility to build pre-configuredimages with different software configuration for faster deployment and server consolidation.In this document, I demonstrated how to build and install images and to integrate the images with other Oracle Solaris features like ZFS and DTrace.Appendix A: archive identification sectionWe can use the head -n 20 /var/tmp/solaris_10_up9.flar command in order to access theidentification section that contains the detailed description.Target # head -n 20 /var/tmp/solaris_10_up9.flarFlAsH-aRcHiVe-2.0section_begin=identificationarchive_id=e4469ee97c3f30699d608b20a36011befiles_archived_method=cpiocreation_date=20100901160827creation_master=mdet5140-1content_name=s10-systemcreation_node=mdet5140-1creation_hardware_class=sun4vcreation_platform=SUNW,T5140creation_processor=sparccreation_release=5.10creation_os_name=SunOScreation_os_version=Generic_142909-16files_compressed_method=nonecontent_architectures=sun4vtype=FULLsection_end=identificationsection_begin=predeploymentbegin 755 predeployment.cpio.ZAppendix B: sysidcfg file sectionTarget # cat sysidcfgsystem_locale=Ctimezone=US/Pacificterminal=xtermssecurity_policy=NONEroot_password=HsABA7Dt/0sXXtimeserver=localhostname_service=NONEnetwork_interface=primary {hostname= solaris10-up9-zonenetmask=255.255.255.0protocol_ipv6=nodefault_route=192.168.0.1}name_service=NONEnfs4_domain=dynamicWe need to copy this file before booting the zoneTarget # cp sysidcfg /zones/solaris10-up9-zone/root/etc/

  Read the article

• FreeBSD 8.1 unstable network connection

  - by frankcheong

  I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

  Read the article

• Migration and deployement problems JBoss 4.2.2.GA to JBoss 6.0.0.M2

  - by krzyamaneko

  Hi, I'm trying to migrate an application running on JBoss 4.2.2.GA to JBoss 6.0.0.M2 I give you some log to explain my problem : boot.log : 2010-03-16 09:59:29,406 ERROR [org.jboss.system.server.profileservice.ProfileServiceBootstrap] (Thread-2) Failed to load profile: Summary of incomplete deployments (SEE PREVIOUS ERRORS FOR DETAILS): DEPLOYMENTS IN ERROR: Deployment "vfszip:/G:/jboss-6.0.0.M2/server/default/deploy/serveur.jar/" is in error due to the following reason(s): java.lang.IllegalStateException: Factory$org.jboss.aspects.remoting.InvokeRemoteInterceptor is already installed. server.log : 11:58:33,156 ERROR [AbstractKernelController] Error installing to PostClassLoader: name=vfszip:/G:/jboss-6.0.0.M2/server/default/deploy/serveur.jar/ state=ClassLoader mode=Manual requiredState=PostClassLoader: org.jboss.deployers.spi.DeploymentException: Cannot process metadata at org.jboss.deployers.spi.DeploymentException.rethrowAsDeploymentException(DeploymentException.java:49) at org.jboss.deployment.AnnotationMetaDataDeployer.deploy(AnnotationMetaDataDeployer.java:196) at org.jboss.deployment.AnnotationMetaDataDeployer.deploy(AnnotationMetaDataDeployer.java:95) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:179) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1660) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1378) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1431) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1319) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:918) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:633) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:898) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:677) at org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process(MainDeployerAdapter.java:117) at org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(ProfileDeployAction.java:70) at org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(AbstractProfileAction.java:53) at org.jboss.system.server.profileservice.repository.AbstractProfileService.install(AbstractProfileService.java:403) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:873) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:620) at org.jboss.system.server.profileservice.repository.AbstractProfileService.registerProfile(AbstractProfileService.java:308) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:259) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:100) at org.jboss.bootstrap.impl.base.server.AbstractServer.startBootstraps(AbstractServer.java:860) at org.jboss.bootstrap.impl.base.server.AbstractServer$StartServerTask.run(AbstractServer.java:441) at java.lang.Thread.run(Thread.java:619) Caused by: java.lang.ClassNotFoundException: common.Main from BaseClassLoader@e1c3a7{vfszip:/G:/jboss-6.0.0.M2/server/default/deploy/serveur.jar/} at org.jboss.classloader.spi.base.BaseClassLoader.loadClass(BaseClassLoader.java:498) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.jboss.deployment.OptAnnotationMetaDataDeployer.processJBossClientMetaData(OptAnnotationMetaDataDeployer.java:105) at org.jboss.deployment.OptAnnotationMetaDataDeployer.processMetaData(OptAnnotationMetaDataDeployer.java:73) at org.jboss.deployment.AnnotationMetaDataDeployer.deploy(AnnotationMetaDataDeployer.java:192) ... 34 more 11:58:40,828 INFO [JMXConnectorServerService] JMX Connector server: service:jmx:rmi://127.0.0.1/jndi/rmi://127.0.0.1:10900/jmxconnector 11:58:46,500 INFO [MailService] Mail Service bound to java:/Mail 11:58:46,593 ERROR [NamingProviderURLWriter] Cannot create a naming service URL file at file:/G:/jboss-6.0.0.M2/server/default/data/jnp-service.url: java.io.IOException: Accès refusé at java.io.WinNTFileSystem.createFileExclusively(Native Method) at java.io.File.createNewFile(File.java:883) at org.jboss.naming.NamingProviderURLWriter.start(NamingProviderURLWriter.java:151) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.jboss.reflect.plugins.introspection.ReflectionUtils.invoke(ReflectionUtils.java:59) at org.jboss.reflect.plugins.introspection.ReflectMethodInfoImpl.invoke(ReflectMethodInfoImpl.java:151) at org.jboss.joinpoint.plugins.BasicMethodJoinPoint.dispatch(BasicMethodJoinPoint.java:66) at org.jboss.kernel.plugins.dependency.KernelControllerContextAction$JoinpointDispatchWrapper.execute(KernelControllerContextAction.java:257) at org.jboss.kernel.plugins.dependency.ExecutionWrapper.execute(ExecutionWrapper.java:47) at org.jboss.kernel.plugins.dependency.KernelControllerContextAction.dispatchExecutionWrapper(KernelControllerContextAction.java:125) at org.jboss.kernel.plugins.dependency.KernelControllerContextAction.dispatchJoinPoint(KernelControllerContextAction.java:72) at org.jboss.kernel.plugins.dependency.LifecycleAction.installActionInternal(LifecycleAction.java:202) at org.jboss.kernel.plugins.dependency.InstallsAwareAction.installAction(InstallsAwareAction.java:54) at org.jboss.kernel.plugins.dependency.InstallsAwareAction.installAction(InstallsAwareAction.java:42) at org.jboss.dependency.plugins.action.SimpleControllerContextAction.simpleInstallAction(SimpleControllerContextAction.java:62) at org.jboss.dependency.plugins.action.AccessControllerContextAction.install(AccessControllerContextAction.java:71) at org.jboss.dependency.plugins.AbstractControllerContextActions.install(AbstractControllerContextActions.java:51) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:873) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:620) at org.jboss.deployers.vfs.deployer.kernel.BeanMetaDataDeployer.deploy(BeanMetaDataDeployer.java:180) at org.jboss.deployers.vfs.deployer.kernel.BeanMetaDataDeployer.deploy(BeanMetaDataDeployer.java:58) at org.jboss.deployers.spi.deployer.helpers.AbstractSimpleRealDeployer.internalDeploy(AbstractSimpleRealDeployer.java:62) at org.jboss.deployers.spi.deployer.helpers.AbstractRealDeployer.deploy(AbstractRealDeployer.java:55) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:179) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1660) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1378) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1399) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1319) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:918) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:633) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:898) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:677) at org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process(MainDeployerAdapter.java:117) at org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(ProfileDeployAction.java:70) at org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(AbstractProfileAction.java:53) at org.jboss.system.server.profileservice.repository.AbstractProfileService.install(AbstractProfileService.java:403) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:873) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:620) at org.jboss.system.server.profileservice.repository.AbstractProfileService.registerProfile(AbstractProfileService.java:308) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:259) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:100) at org.jboss.bootstrap.impl.base.server.AbstractServer.startBootstraps(AbstractServer.java:860) at org.jboss.bootstrap.impl.base.server.AbstractServer$StartServerTask.run(AbstractServer.java:441) at java.lang.Thread.run(Thread.java:619) this application works fine on JBoss 4.2.2.GA, if someone have any idea, I need some help.

  Read the article

• IBM Websphere on Windows- OutOfMemoryError: Failed to create a thread

  - by Kishnan

  I have a J2EE application running on an IBM Websphere Application Server on a Windows Operating System. Occasionally I see an OutOfMemoryError Exception with the following information in the javacore file. 1TISIGINFO Dump Event "systhrow" (00040000) Detail "java/lang/OutOfMemoryError":"Failed to create a thread: retVal -1073741830, errno 12" received Java is run with the following configurations: -Xms512m -Xmx1350m -Xscmx50M Analyzing the javacore file, the number of threads are just 124. Analyzing the heap dump, the memory occupied by the heap is about 500Mb. Given the relatively normal number of threads and heap size a lot lower than the maximum, I am trying to figure out why I see this error? I´m not sure if this helps, but here is the top section of the javacore file... NULL ------------------------------------------------------------------------ 0SECTION TITLE subcomponent dump routine NULL =============================== 1TISIGINFO Dump Event "systhrow" (00040000) Detail "java/lang/OutOfMemoryError":"Failed to create a thread: retVal -1073741830, errno 12" received 1TIDATETIME Date: 1970/01/01 at 00:00:00 1TIFILENAME Javacore filename: d:\WebSphere\AppServer\profiles\AppSrv01\javacore.19700101.000000.652.0003.txt NULL ------------------------------------------------------------------------ 0SECTION GPINFO subcomponent dump routine NULL ================================ 2XHOSLEVEL OS Level : Windows Server 2003 5.2 build 3790 Service Pack 2 2XHCPUS Processors - 3XHCPUARCH Architecture : x86 3XHNUMCPUS How Many : 2 NULL 1XHERROR2 Register dump section only produced for SIGSEGV, SIGILL or SIGFPE. NULL NULL ------------------------------------------------------------------------ 0SECTION ENVINFO subcomponent dump routine NULL ================================= 1CIJAVAVERSION J2RE 5.0 IBM J9 2.3 Windows Server 2003 x86-32 build j9vmwi3223-20080315 1CIVMVERSION VM build 20080314_17962_lHdSMr 1CIJITVERSION JIT enabled - 20080130_0718ifx2_r8 1CIRUNNINGAS Running as a standalone JVM 1CICMDLINE d:/WebSphere/AppServer/java/bin/java -Declipse.security -Dwas.status.socket=4434 -Dosgi.install.area=d:/WebSphere/AppServer -Dosgi.configuration.area=d:\WebSphere\AppServer\profiles\AppSrv01/configuration -Dosgi.framework.extensions=com.ibm.cds -Xshareclasses:name=webspherev61,nonFatal -Xscmx50M -Dcom.ibm.nio.DirectByteBuffer.SilentRetry=true -Xbootclasspath/p:d:/WebSphere/AppServer/java/jre/lib/ext/ibmorb.jar;d:/WebSphere/AppServer/java/jre/lib/ext/ibmext.jar -classpath d:\WebSphere\AppServer\profiles\AppSrv01/properties;d:/WebSphere/AppServer/properties;d:/WebSphere/AppServer/lib/startup.jar;d:/WebSphere/AppServer/lib/bootstrap.jar;d:/WebSphere/AppServer/lib/j2ee.jar;d:/WebSphere/AppServer/lib/lmproxy.jar;d:/WebSphere/AppServer/lib/urlprotocols.jar;d:/WebSphere/AppServer/deploytool/itp/batchboot.jar;d:/WebSphere/AppServer/deploytool/itp/batch2.jar;d:/WebSphere/AppServer/java/lib/tools.jar -Dibm.websphere.internalClassAccessMode=allow -Xms512m -Xmx1350m -Dws.ext.dirs=d:/WebSphere/AppServer/java/lib;d:\WebSphere\AppServer\profiles\AppSrv01/classes;d:/WebSphere/AppServer/classes;d:/WebSphere/AppServer/lib;d:/WebSphere/AppServer/installedChannels;d:/WebSphere/AppServer/lib/ext;d:/WebSphere/AppServer/web/help;d:/WebSphere/AppServer/deploytool/itp/plugins/com.ibm.etools.ejbdeploy/runtime -Dderby.system.home=d:/WebSphere/AppServer/derby -Dcom.ibm.itp.location=d:/WebSphere/AppServer/bin -Djava.util.logging.configureByServer=true -Duser.install.root=d:\WebSphere\AppServer\profiles\AppSrv01 -Djavax.management.builder.initial=com.ibm.ws.management.PlatformMBeanServerBuilder -Dwas.install.root=d:/WebSphere/AppServer -Dpython.cachedir=d:\WebSphere\AppServer\profiles\AppSrv01/temp/cachedir -Djava.util.logging.manager=com.ibm.ws.bootstrap.WsLogManager -Dserver.root=d:\WebSphere\AppServer\profiles\AppSrv01 -Dappserver.platform=was61 -Ddeploymentmgr.rmi.connection=ensi-nd01.sistema-cni.org.br:9809 -Dappserver.rmi.host=ensi-nd01.sistema-cni.org.br -Duser.timezone=GMT-3 -Djava.security.auth.login.config=d:\WebSphere\AppServer\profiles\AppSrv01/properties/wsjaas.conf -Djava.security.policy=d:\WebSphere\AppServer\profiles\AppSrv01/properties/server.policy com.ibm.wsspi.bootstrap.WSPreLauncher -nosplash -application com.ibm.ws.bootstrap.WSLauncher com.ibm.ws.runtime.WsServer d:\WebSphere\AppServer\profiles\AppSrv01\config ensi-nd01Cell01 ensi-aplic01Node01 lumis4.0.11 1CIJAVAHOMEDIR Java Home Dir: d:\WebSphere\AppServer\java\jre 1CIJAVADLLDIR Java DLL Dir: d:\WebSphere\AppServer\java\jre\bin 1CISYSCP Sys Classpath: d:/WebSphere/AppServer/java/jre/lib/ext/ibmorb.jar;d:/WebSphere/AppServer/java/jre/lib/ext/ibmext.jar;d:\WebSphere\AppServer\java\jre\lib\vm.jar;d:\WebSphere\AppServer\java\jre\lib\core.jar;d:\WebSphere\AppServer\java\jre\lib\charsets.jar;d:\WebSphere\AppServer\java\jre\lib\graphics.jar;d:\WebSphere\AppServer\java\jre\lib\security.jar;d:\WebSphere\AppServer\java\jre\lib\ibmpkcs.jar;d:\WebSphere\AppServer\java\jre\lib\ibmorb.jar;d:\WebSphere\AppServer\java\jre\lib\ibmcfw.jar;d:\WebSphere\AppServer\java\jre\lib\ibmorbapi.jar;d:\WebSphere\AppServer\java\jre\lib\ibmjcefw.jar;d:\WebSphere\AppServer\java\jre\lib\ibmjgssprovider.jar;d:\WebSphere\AppServer\java\jre\lib\ibmjsseprovider2.jar;d:\WebSphere\AppServer\java\jre\lib\ibmjaaslm.jar;d:\WebSphere\AppServer\java\jre\lib\ibmjaasactivelm.jar;d:\WebSphere\AppServer\java\jre\lib\ibmcertpathprovider.jar;d:\WebSphere\AppServer\java\jre\lib\server.jar;d:\WebSphere\AppServer\java\jre\lib\xml.jar; 1CIUSERARGS UserArgs: 2CIUSERARG -Xjcl:jclscar_23 2CIUSERARG -Dcom.ibm.oti.vm.bootstrap.library.path=d:\WebSphere\AppServer\java\jre\bin 2CIUSERARG -Dsun.boot.library.path=d:\WebSphere\AppServer\java\jre\bin 2CIUSERARG -Djava.library.path=d:\WebSphere\AppServer\java\jre\bin;.;D:\WebSphere\AppServer\bin;D:\WebSphere\AppServer\java\bin;D:\WebSphere\AppServer\java\jre\bin;D:\programas\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Intel\DMIX 2CIUSERARG -Djava.home=d:\WebSphere\AppServer\java\jre 2CIUSERARG -Djava.ext.dirs=d:\WebSphere\AppServer\java\jre\lib\ext 2CIUSERARG -Duser.dir=d:\WebSphere\AppServer\profiles\AppSrv01 2CIUSERARG _j2se_j9=70912 0x7E7A0BE8 2CIUSERARG -Dconsole.encoding=Cp850 2CIUSERARG vfprintf 0x00401145 2CIUSERARG -Declipse.security 2CIUSERARG -Dwas.status.socket=4434 2CIUSERARG -Dosgi.install.area=d:/WebSphere/AppServer 2CIUSERARG -Dosgi.configuration.area=d:\WebSphere\AppServer\profiles\AppSrv01/configuration 2CIUSERARG -Dosgi.framework.extensions=com.ibm.cds 2CIUSERARG -Xshareclasses:name=webspherev61,nonFatal 2CIUSERARG -Xscmx50M 2CIUSERARG -Dcom.ibm.nio.DirectByteBuffer.SilentRetry=true 2CIUSERARG -Xbootclasspath/p:d:/WebSphere/AppServer/java/jre/lib/ext/ibmorb.jar;d:/WebSphere/AppServer/java/jre/lib/ext/ibmext.jar 2CIUSERARG -Dibm.websphere.internalClassAccessMode=allow 2CIUSERARG -Xms512m 2CIUSERARG -Xmx1350m 2CIUSERARG -Dws.ext.dirs=d:/WebSphere/AppServer/java/lib;d:\WebSphere\AppServer\profiles\AppSrv01/classes;d:/WebSphere/AppServer/classes;d:/WebSphere/AppServer/lib;d:/WebSphere/AppServer/installedChannels;d:/WebSphere/AppServer/lib/ext;d:/WebSphere/AppServer/web/help;d:/WebSphere/AppServer/deploytool/itp/plugins/com.ibm.etools.ejbdeploy/runtime 2CIUSERARG -Dderby.system.home=d:/WebSphere/AppServer/derby 2CIUSERARG -Dcom.ibm.itp.location=d:/WebSphere/AppServer/bin 2CIUSERARG -Djava.util.logging.configureByServer=true 2CIUSERARG -Duser.install.root=d:\WebSphere\AppServer\profiles\AppSrv01 2CIUSERARG -Djavax.management.builder.initial=com.ibm.ws.management.PlatformMBeanServerBuilder 2CIUSERARG -Dwas.install.root=d:/WebSphere/AppServer 2CIUSERARG -Dpython.cachedir=d:\WebSphere\AppServer\profiles\AppSrv01/temp/cachedir 2CIUSERARG -Djava.util.logging.manager=com.ibm.ws.bootstrap.WsLogManager 2CIUSERARG -Dserver.root=d:\WebSphere\AppServer\profiles\AppSrv01 2CIUSERARG -Dappserver.platform=was61 2CIUSERARG -Ddeploymentmgr.rmi.connection=ensi-nd01.sistema-cni.org.br:9809 2CIUSERARG -Dappserver.rmi.host=ensi-nd01.sistema-cni.org.br 2CIUSERARG -Duser.timezone=GMT-3 2CIUSERARG -Djava.security.auth.login.config=d:\WebSphere\AppServer\profiles\AppSrv01/properties/wsjaas.conf 2CIUSERARG -Djava.security.policy=d:\WebSphere\AppServer\profiles\AppSrv01/properties/server.policy 2CIUSERARG -Dinvokedviajava 2CIUSERARG -Djava.class.path=d:\WebSphere\AppServer\profiles\AppSrv01/properties;d:/WebSphere/AppServer/properties;d:/WebSphere/AppServer/lib/startup.jar;d:/WebSphere/AppServer/lib/bootstrap.jar;d:/WebSphere/AppServer/lib/j2ee.jar;d:/WebSphere/AppServer/lib/lmproxy.jar;d:/WebSphere/AppServer/lib/urlprotocols.jar;d:/WebSphere/AppServer/deploytool/itp/batchboot.jar;d:/WebSphere/AppServer/deploytool/itp/batch2.jar;d:/WebSphere/AppServer/java/lib/tools.jar 2CIUSERARG vfprintf 2CIUSERARG _port_library 0x7E7A04F8 2CIUSERARG -Xdump NULL

  Read the article

• Unable to use factory girl with Cucumber and rails 3 (bundler problem)

  - by jbpros

  Hi there, I'm trying to run cucumber features with factory girl factories on a fresh Rails 3 application. Here is my Gemfile: source "http://gemcutter.org" gem "rails", "3.0.0.beta" gem "pg" gem "factory_girl", :git => "git://github.com/thoughtbot/factory_girl.git", :branch => "rails3" gem "rspec-rails", ">= 2.0.0.beta.4" gem "capybara" gem "database_cleaner" gem "cucumber-rails", :require => false Then the bundle install commande just runs smoothly: $ bundle install /usr/lib/ruby/gems/1.8/gems/bundler-0.9.3/lib/bundler/installer.rb:81:Warning: Gem::Dependency#version_requirements is deprecated and will be removed on or after August 2010. Use #requirement Updating git://github.com/thoughtbot/factory_girl.git Fetching source index from http://gemcutter.org Resolving dependencies Installing abstract (1.0.0) from system gems Installing actionmailer (3.0.0.beta) from system gems Installing actionpack (3.0.0.beta) from system gems Installing activemodel (3.0.0.beta) from system gems Installing activerecord (3.0.0.beta) from system gems Installing activeresource (3.0.0.beta) from system gems Installing activesupport (3.0.0.beta) from system gems Installing arel (0.2.1) from system gems Installing builder (2.1.2) from system gems Installing bundler (0.9.13) from system gems Installing capybara (0.3.6) from system gems Installing cucumber (0.6.3) from system gems Installing cucumber-rails (0.3.0) from system gems Installing culerity (0.2.9) from system gems Installing database_cleaner (0.5.0) from system gems Installing diff-lcs (1.1.2) from system gems Installing erubis (2.6.5) from system gems Installing factory_girl (1.2.3) from git://github.com/thoughtbot/factory_girl.git (at rails3) Installing ffi (0.6.3) from system gems Installing i18n (0.3.6) from system gems Installing json_pure (1.2.3) from system gems Installing mail (2.1.3) from system gems Installing memcache-client (1.7.8) from system gems Installing mime-types (1.16) from system gems Installing nokogiri (1.4.1) from system gems Installing pg (0.9.0) from system gems Installing polyglot (0.3.0) from system gems Installing rack (1.1.0) from system gems Installing rack-mount (0.4.7) from system gems Installing rack-test (0.5.3) from system gems Installing rails (3.0.0.beta) from system gems Installing railties (3.0.0.beta) from system gems Installing rake (0.8.7) from system gems Installing rspec (2.0.0.beta.4) from system gems Installing rspec-core (2.0.0.beta.4) from system gems Installing rspec-expectations (2.0.0.beta.4) from system gems Installing rspec-mocks (2.0.0.beta.4) from system gems Installing rspec-rails (2.0.0.beta.4) from system gems Installing selenium-webdriver (0.0.17) from system gems Installing term-ansicolor (1.0.5) from system gems Installing text-format (1.0.0) from system gems Installing text-hyphen (1.0.0) from system gems Installing thor (0.13.4) from system gems Installing treetop (1.4.4) from system gems Installing tzinfo (0.3.17) from system gems Installing webrat (0.7.0) from system gems Your bundle is complete! When I run cucumber, here is the error I get: $ rake cucumber (in /home/jbpros/projects/deorbitburn) /usr/lib/ruby/gems/1.8/gems/bundler-0.9.3/lib/bundler/resolver.rb:97:Warning: Gem::Dependency#version_requirements is deprecated and will be removed on or after August 2010. Use #requirement NOTICE: CREATE TABLE will create implicit sequence "posts_id_seq" for serial column "posts.id" NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "posts_pkey" for table "posts" /usr/bin/ruby1.8 -I "/usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/lib:lib" "/usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/cucumber" --profile default Using the default profile... git://github.com/thoughtbot/factory_girl.git (at rails3) is not checked out. Please run `bundle install` (Bundler::PathError) /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/source.rb:282:in `load_spec_files' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/source.rb:190:in `local_specs' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:36:in `runtime_gems' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:35:in `each' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:35:in `runtime_gems' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/index.rb:5:in `build' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:34:in `runtime_gems' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:14:in `index' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/index.rb:5:in `build' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:13:in `index' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:55:in `resolve_locally' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:28:in `specs' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:65:in `specs_for' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:23:in `requested_specs' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/runtime.rb:18:in `setup' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler.rb:68:in `setup' /home/jbpros/projects/deorbitburn/config/boot.rb:7 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `polyglot_original_require' /usr/lib/ruby/gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in `require' /home/jbpros/projects/deorbitburn/config/application.rb:1 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `polyglot_original_require' /usr/lib/ruby/gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in `require' /home/jbpros/projects/deorbitburn/config/environment.rb:2 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `polyglot_original_require' /usr/lib/ruby/gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in `require' /home/jbpros/projects/deorbitburn/features/support/env.rb:8 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `polyglot_original_require' /usr/lib/ruby/gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in `require' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/rb_support/rb_language.rb:124:in `load_code_file' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:85:in `load_code_file' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:77:in `load_code_files' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:76:in `each' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:76:in `load_code_files' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/cli/main.rb:48:in `execute!' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/cli/main.rb:20:in `execute' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/cucumber:8 rake aborted! Command failed with status (1): [/usr/bin/ruby1.8 -I "/usr/lib/ruby/gems/1....] (See full trace by running task with --trace) Do I have to do something special for bundler to check out factory girl's repository on github?

  Read the article

• With a jquery modular dialog how do I stop the form values from persisting?

  - by stormist

  (Citing source at: http://jqueryui.com/demos/dialog/#modal-form) As an example, this works great but each time the form is subsequently opened the user entered values remain. How can I stop this behavior? (the form will be used multiple times on the same page. <style type="text/css"> body { font-size: 62.5%; } label, input { display:block; } input.text { margin-bottom:12px; width:95%; padding: .4em; } fieldset { padding:0; border:0; margin-top:25px; } h1 { font-size: 1.2em; margin: .6em 0; } div#users-contain { width: 350px; margin: 20px 0; } div#users-contain table { margin: 1em 0; border-collapse: collapse; width: 100%; } div#users-contain table td, div#users-contain table th { border: 1px solid #eee; padding: .6em 10px; text-align: left; } .ui-dialog .ui-state-error { padding: .3em; } .validateTips { border: 1px solid transparent; padding: 0.3em; } </style> <script type="text/javascript"> $(function() { // a workaround for a flaw in the demo system (http://dev.jqueryui.com/ticket/4375), ignore! $("#dialog").dialog("destroy"); var name = $("#name"), email = $("#email"), password = $("#password"), allFields = $([]).add(name).add(email).add(password), tips = $(".validateTips"); function updateTips(t) { tips .text(t) .addClass('ui-state-highlight'); setTimeout(function() { tips.removeClass('ui-state-highlight', 1500); }, 500); } function checkLength(o,n,min,max) { if ( o.val().length > max || o.val().length < min ) { o.addClass('ui-state-error'); updateTips("Length of " + n + " must be between "+min+" and "+max+"."); return false; } else { return true; } } function checkRegexp(o,regexp,n) { if ( !( regexp.test( o.val() ) ) ) { o.addClass('ui-state-error'); updateTips(n); return false; } else { return true; } } $("#dialog-form").dialog({ autoOpen: false, height: 300, width: 350, modal: true, buttons: { 'Create an account': function() { var bValid = true; allFields.removeClass('ui-state-error'); bValid = bValid && checkLength(name,"username",3,16); bValid = bValid && checkLength(email,"email",6,80); bValid = bValid && checkLength(password,"password",5,16); bValid = bValid && checkRegexp(name,/^[a-z]([0-9a-z_])+$/i,"Username may consist of a-z, 0-9, underscores, begin with a letter."); // From jquery.validate.js (by joern), contributed by Scott Gonzalez: http://projects.scottsplayground.com/email_address_validation/ bValid = bValid && checkRegexp(email,/^((([a-z]|\d|[!#\$%&'\*\+\-\/=\?\^_`{\|}~]|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])+(\.([a-z]|\d|[!#\$%&'\*\+\-\/=\?\^_`{\|}~]|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])+)*)|((\x22)((((\x20|\x09)*(\x0d\x0a))?(\x20|\x09)+)?(([\x01-\x08\x0b\x0c\x0e-\x1f\x7f]|\x21|[\x23-\x5b]|[\x5d-\x7e]|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])|(\\([\x01-\x09\x0b\x0c\x0d-\x7f]|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF]))))*(((\x20|\x09)*(\x0d\x0a))?(\x20|\x09)+)?(\x22)))@((([a-z]|\d|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])|(([a-z]|\d|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])([a-z]|\d|-|\.|_|~|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])*([a-z]|\d|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])))\.)+(([a-z]|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])|(([a-z]|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])([a-z]|\d|-|\.|_|~|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])*([a-z]|[\u00A0-\uD7FF\uF900-\uFDCF\uFDF0-\uFFEF])))\.?$/i,"eg. [email protected]"); bValid = bValid && checkRegexp(password,/^([0-9a-zA-Z])+$/,"Password field only allow : a-z 0-9"); if (bValid) { $('#users tbody').append('<tr>' + '<td>' + name.val() + '</td>' + '<td>' + email.val() + '</td>' + '<td>' + password.val() + '</td>' + '</tr>'); $(this).dialog('close'); } }, Cancel: function() { $(this).dialog('close'); } }, close: function() { allFields.val('').removeClass('ui-state-error'); } }); $('#create-user') .button() .click(function() { $('#dialog-form').dialog('open'); }); }); </script> <div class="demo"> <div id="dialog-form" title="Create new user"> <p class="validateTips">All form fields are required.</p> <form> <fieldset> <label for="name">Name</label> <input type="text" name="name" id="name" class="text ui-widget-content ui-corner-all" /> <label for="email">Email</label> <input type="text" name="email" id="email" value="" class="text ui-widget-content ui-corner-all" /> <label for="password">Password</label> <input type="password" name="password" id="password" value="" class="text ui-widget-content ui-corner-all" /> </fieldset> </form> </div> <div id="users-contain" class="ui-widget"> <h1>Existing Users:</h1> <table id="users" class="ui-widget ui-widget-content"> <thead> <tr class="ui-widget-header "> <th>Name</th> <th>Email</th> <th>Password</th> </tr> </thead> <tbody> <tr> <td>John Doe</td> <td>[email protected]</td> <td>johndoe1</td> </tr> </tbody> </table> </div> <button id="create-user">Create new user</button> </div><!-- End demo --> <div class="demo-description"> <p>Use a modal dialog to require that the user enter data during a multi-step process. Embed form markup in the content area, set the <code>modal</code> option to true, and specify primary and secondary user actions with the <code>buttons</code> option.</p> </div><!-- End demo-description -->

  Read the article

• Storage model for various user setting and attributes in database?

  - by dvd

  I'm currently trying to upgrade a user management system for one web application. This web application is used to provide remote access to various networking equipment for educational purposes. All equipment is assigned to various pods, which users can book for periods of time. The current system is very simple - just 2 user types: administrators and students. All their security and other attributes are mostly hardcoded. I want to change this to something like the following model: user <-- (1..n)profile <--- (1..n) attributes. I.e. user can be assigned several profiles and each profile can have multiple attributes. At runtime all profiles and attributes are merged into single active profile. Some examples of attributes i'm planning to implement: EXPIRATION_DATE - single value, value type: date, specifies when user account will expire; ACCESS_POD - single value, value type: ref to object of Pod class, specifies which pod the user is allowed to book, user profile can have multiple such attributes with different values; TIME_QUOTA - single value, value type: integer, specifies maximum length of time for which student can reserve equipment. CREDIT_CHARGING - multi valued, specifies how much credits will be assigned to user over period of time. (Reservation of devices will cost credits, which will regenerate over time); Security permissions and user preferences can end up as profile or user attributes too: i.e CAN_CREATE_USERS, CAN_POST_NEWS, CAN_EDIT_DEVICES, FONT_SIZE, etc.. This way i could have, for example: students of course A will have profiles STUDENT (with basic attributes) and PROFILE A (wich grants acces to pod A). Students of course B will have profiles: STUDENT, PROFILE B(wich grants to pod B and have increased time quotas). I'm using Spring and Hibernate frameworks for this application and MySQL for database. For this web application i would like to stay within boundaries of these tools. The problem is, that i can't figure out how to best represent all these attributes in database. I also want to create some kind of unified way of retrieveing these attributes and their values. Here is the model i've come up with. Base classes. public abstract class Attribute{ private Long id; Attribute() {} abstract public String getName(); public Long getId() {return id; } void setId(Long id) {this.id = id;} } public abstract class SimpleAttribute extends Attribute{ public abstract Serializable getValue(); abstract void setValue(Serializable s); @Override public boolean equals(Object obj) { ... } @Override public int hashCode() { ... } } Simple attributes can have only one value of any type (including object and enum). Here are more specific attributes: public abstract class IntAttribute extends SimpleAttribute { private Integer value; public Integer getValue() { return value; } void setValue(Integer value) { this.value = value;} void setValue(Serializable s) { setValue((Integer)s); } } public class MaxOrdersAttribute extends IntAttribute { public String getName() { return "Maximum outstanding orders"; } } public final class CreditRateAttribute extends IntAttribute { public String getName() { return "Credit Regeneration Rate"; } } All attributes stored stored using Hibenate variant "table per class hierarchy". Mapping: <class name="ru.mirea.rea.model.abac.Attribute" table="ATTRIBUTES" abstract="true" > <id name="id" column="id"> <generator class="increment" /> </id> <discriminator column="attributeType" type="string"/> <subclass name="ru.mirea.rea.model.abac.SimpleAttribute" abstract="true"> <subclass name="ru.mirea.rea.model.abac.IntAttribute" abstract="true" > <property name="value" column="intVal" type="integer"/> <subclass name="ru.mirea.rea.model.abac.CreditRateAttribute" discriminator-value="CreditRate" /> <subclass name="ru.mirea.rea.model.abac.MaxOrdersAttribute" discriminator-value="MaxOrders" /> </subclass> <subclass name="ru.mirea.rea.model.abac.DateAttribute" abstract="true" > <property name="value" column="dateVal" type="timestamp"/> <subclass name="ru.mirea.rea.model.abac.ExpirationDateAttribute" discriminator-value="ExpirationDate" /> </subclass> <subclass name="ru.mirea.rea.model.abac.PodAttribute" abstract="true" > <many-to-one name="value" column="podVal" class="ru.mirea.rea.model.pods.Pod"/> <subclass name="ru.mirea.rea.model.abac.PodAccessAttribute" discriminator-value="PodAccess" lazy="false"/> </subclass> <subclass name="ru.mirea.rea.model.abac.SecurityPermissionAttribute" discriminator-value="SecurityPermission" lazy="false"> <property name="value" column="spVal" type="ru.mirea.rea.db.hibernate.customTypes.SecurityPermissionType"/> </subclass> </subclass> </class> SecurityPermissionAttribute uses enumeration of various permissions as it's value. Several types of attributes imlement GrantedAuthority interface and can be used with Spring Security for authentication and authorization. Attributes can be created like this: public final class AttributeManager { public <T extends SimpleAttribute> T createSimpleAttribute(Class<T> c, Serializable value) { Session session = HibernateUtil.getCurrentSession(); T att = null; ... att = c.newInstance(); att.setValue(value); session.save(att); session.flush(); ... return att; } public <T extends SimpleAttribute> List<T> findSimpleAttributes(Class<T> c) { List<T> result = new ArrayList<T>(); Session session = HibernateUtil.getCurrentSession(); List<T> temp = session.createCriteria(c).list(); result.addAll(temp); return result; } } And retrieved through User Profiles to which they are assigned. I do not expect that there would be very large amount of rows in the ATTRIBUTES table, but are there any serious drawbacks of such design?

  Read the article

• errors deploying an EAR with EJBs 2.1 into JBoss AS5

  - by Marina

  Hi, I'm porting an application with EJBs 2.1 from Weblogic9 to JBoss AS5. I have made some of the changes like adding jboss.xml descriptors to EJBs and fixing application.xml of the EAR, but there are still problems when deploying the EAR. Here is a summary of the the latest error I'm getting when the first EJB is being deployed by JBoss (I will add the full stack trace at the end of the message): 14:15:48,124 ERROR [AbstractKernelController] Error installing to Parse: name=vf sfile:/C:/Marina/Tools/jboss-5.1.0.GA/server/default/deploy/contracts.ear/ state =Not Installed mode=Manual requiredState=Parse org.jboss.deployers.spi.DeploymentException: Error creating managed object for v fsfile:/C:/Marina/Tools/jboss-5.1.0.GA/server/default/deploy/contracts.ear/admin -ejb.jar/ .... Caused by: org.jboss.xb.binding.JBossXBException: Failed to parse source: Failed to parse schema for nsURI=, baseURI=null, schemaLocation=http://www.jboss.org/j2ee/dtd/jboss_2_4.dtd .... Caused by: org.jboss.xb.binding.JBossXBRuntimeException: -1:-1 94:3 The markup in the document preceding the root element must be well-formed. Is this a problem with parsing the jboss_2_4.dtd itself? or is it something worng with my descriptors for the EJB? When I try to validate the jboss_2_4.dtd in an XML editor it does complain about a syntax error at line 94:1 , which is the beginning of the first declaration, although it looks fine. Any ideas? Thanks! Marina Full error stack trace: 14:15:48,124 ERROR [AbstractKernelController] Error installing to Parse: name=vf sfile:/C:/Marina/Tools/jboss-5.1.0.GA/server/default/deploy/contracts.ear/ state =Not Installed mode=Manual requiredState=Parse org.jboss.deployers.spi.DeploymentException: Error creating managed object for v fsfile:/C:/Marina/Tools/jboss-5.1.0.GA/server/default/deploy/contracts.ear/admin -ejb.jar/ at org.jboss.deployers.spi.DeploymentException.rethrowAsDeploymentExcept ion(DeploymentException.java:49) at org.jboss.deployers.spi.deployer.helpers.AbstractParsingDeployerWithO utput.createMetaData(AbstractParsingDeployerWithOutput.java:362) at org.jboss.deployers.spi.deployer.helpers.AbstractParsingDeployerWithO utput.createMetaData(AbstractParsingDeployerWithOutput.java:322) at org.jboss.deployers.spi.deployer.helpers.AbstractParsingDeployerWithO utput.createMetaData(AbstractParsingDeployerWithOutput.java:294) at org.jboss.deployment.JBossEjbParsingDeployer.createMetaData(JBossEjbP arsingDeployer.java:95) at org.jboss.deployers.spi.deployer.helpers.AbstractParsingDeployerWithO utput.deploy(AbstractParsingDeployerWithOutput.java:234) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(Deployer Wrapper.java:171) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(Deployer sImpl.java:1439) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFi rst(DeployersImpl.java:1157) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFi rst(DeployersImpl.java:1210) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(Deployers Impl.java:1098) at org.jboss.dependency.plugins.AbstractControllerContext.install(Abstra ctControllerContext.java:348) at org.jboss.dependency.plugins.AbstractController.install(AbstractContr oller.java:1631) at org.jboss.dependency.plugins.AbstractController.incrementState(Abstra ctController.java:934) at org.jboss.dependency.plugins.AbstractController.resolveContexts(Abstr actController.java:1082) at org.jboss.dependency.plugins.AbstractController.resolveContexts(Abstr actController.java:984) at org.jboss.dependency.plugins.AbstractController.change(AbstractContro ller.java:822) at org.jboss.dependency.plugins.AbstractController.change(AbstractContro ller.java:553) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(Deployers Impl.java:781) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeploye rImpl.java:702) at org.jboss.system.server.profileservice.repository.MainDeployerAdapter .process(MainDeployerAdapter.java:117) at org.jboss.system.server.profileservice.repository.ProfileDeployAction .install(ProfileDeployAction.java:70) at org.jboss.system.server.profileservice.repository.AbstractProfileActi on.install(AbstractProfileAction.java:53) at org.jboss.system.server.profileservice.repository.AbstractProfileServ ice.install(AbstractProfileService.java:361) at org.jboss.dependency.plugins.AbstractControllerContext.install(Abstra ctControllerContext.java:348) at org.jboss.dependency.plugins.AbstractController.install(AbstractContr oller.java:1631) at org.jboss.dependency.plugins.AbstractController.incrementState(Abstra ctController.java:934) at org.jboss.dependency.plugins.AbstractController.resolveContexts(Abstr actController.java:1082) at org.jboss.dependency.plugins.AbstractController.resolveContexts(Abstr actController.java:984) at org.jboss.dependency.plugins.AbstractController.change(AbstractContro ller.java:822) at org.jboss.dependency.plugins.AbstractController.change(AbstractContro ller.java:553) at org.jboss.system.server.profileservice.repository.AbstractProfileServ ice.activateProfile(AbstractProfileService.java:306) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start( ProfileServiceBootstrap.java:271) at org.jboss.bootstrap.AbstractServerImpl.start(AbstractServerImpl.java: 461) at org.jboss.Main.boot(Main.java:221) at org.jboss.Main$1.run(Main.java:556) at java.lang.Thread.run(Thread.java:619) Caused by: org.jboss.xb.binding.JBossXBException: Failed to parse source: Failed to parse schema for nsURI=, baseURI=null, schemaLocation=http://www.jboss.org/j 2ee/dtd/jboss_2_4.dtd at org.jboss.xb.binding.parser.sax.SaxJBossXBParser.parse(SaxJBossXBPars er.java:203) at org.jboss.xb.binding.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java :168) at org.jboss.xb.util.JBossXBHelper.parse(JBossXBHelper.java:189) at org.jboss.xb.util.JBossXBHelper.parse(JBossXBHelper.java:166) at org.jboss.deployers.vfs.spi.deployer.SchemaResolverDeployer.parse(Sch emaResolverDeployer.java:137) at org.jboss.deployers.vfs.spi.deployer.SchemaResolverDeployer.parse(Sch emaResolverDeployer.java:121) at org.jboss.deployers.vfs.spi.deployer.AbstractVFSParsingDeployer.parse AndInit(AbstractVFSParsingDeployer.java:256) at org.jboss.deployers.vfs.spi.deployer.AbstractVFSParsingDeployer.parse (AbstractVFSParsingDeployer.java:188) at org.jboss.deployers.spi.deployer.helpers.AbstractParsingDeployerWithO utput.createMetaData(AbstractParsingDeployerWithOutput.java:348) ... 35 more Caused by: org.jboss.xb.binding.JBossXBRuntimeException: Failed to parse schema for nsURI=, baseURI=null, schemaLocation=http://www.jboss.org/j2ee/dtd/jboss_2_4 .dtd at org.jboss.xb.binding.resolver.AbstractMutableSchemaResolver.resolve(A bstractMutableSchemaResolver.java:293) at org.jboss.xb.binding.sunday.unmarshalling.SundayContentHandler.startE lement(SundayContentHandler.java:274) at org.jboss.xb.binding.parser.sax.SaxJBossXBParser$DelegatingContentHan dler.startElement(SaxJBossXBParser.java:401) at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Sour ce) at org.apache.xerces.xinclude.XIncludeHandler.startElement(Unknown Sourc e) at org.apache.xerces.impl.dtd.XMLDTDValidator.startElement(Unknown Sourc e) at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unkn own Source) at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.s canRootElementHook(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContent Dispatcher.dispatch(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Un known Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source) at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source) at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Sour ce) at org.jboss.xb.binding.parser.sax.SaxJBossXBParser.parse(SaxJBossXBPars er.java:199) ... 43 more Caused by: org.jboss.xb.binding.JBossXBRuntimeException: -1:-1 94:3 The markup i n the document preceding the root element must be well-formed. at org.jboss.xb.binding.sunday.unmarshalling.XsdBinderTerminatingErrorHa ndler.handleError(XsdBinderTerminatingErrorHandler.java:40) at org.apache.xerces.impl.xs.XMLSchemaLoader.reportDOMFatalError(Unknown Source) at org.apache.xerces.impl.xs.XSLoaderImpl.load(Unknown Source) at org.jboss.xb.binding.Util.loadSchema(Util.java:395) at org.jboss.xb.binding.sunday.unmarshalling.XsdBinder.bind(XsdBinder.ja va:176) at org.jboss.xb.binding.sunday.unmarshalling.XsdBinder.bind(XsdBinder.ja va:147) at org.jboss.xb.binding.resolver.AbstractMutableSchemaResolver.resolve(A bstractMutableSchemaResolver.java:285) ... 58 more

  Read the article

• Where is this System.MissingMethodException occurring? How can I tell?

  - by Jeremy Holovacs

  I am a newbie to ASP.NET MVC (v2), and I am trying to use a strongly-typed view tied to a model object that contains two optional multi-select listbox objects. Upon clicking the submit button, these objects may have 0 or more values selected for them. My model class looks like this: using System; using System.Web.Mvc; using System.Collections.Generic; namespace ModelClasses.Messages { public class ComposeMessage { public bool is_html { get; set; } public bool is_urgent { get; set; } public string message_subject { get; set; } public string message_text { get; set; } public string action { get; set; } public MultiSelectList recipients { get; set; } public MultiSelectList recipient_roles { get; set; } public ComposeMessage() { this.is_html = false; this.is_urgent = false; this.recipients = new MultiSelectList(new Dictionary<int, string>(), "Key", "Value"); this.recipient_roles = new MultiSelectList(new Dictionary<int, string>(), "Key", "Value"); } } } My view looks like this: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<ModelClasses.Messages.ComposeMessage>" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server">Compose A Message </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2> Compose A New Message:</h2> <br /> <span id="navigation_top"> <%= Html.ActionLink("\\Home", "Index", "Home") %><%= Html.ActionLink("\\Messages", "Home") %></span> <% using (Html.BeginForm()) { %> <fieldset> <legend>Message Headers</legend> <label for="message_subject"> Subject:</label> <%= Html.TextBox("message_subject")%> <%= Html.ValidationMessage("message_subject")%> <label for="selected_recipients"> Recipient Users:</label> <%= Html.ListBox("recipients") %> <%= Html.ValidationMessage("selected_recipients")%> <label for="selected_recipient_roles"> Recipient Roles:</label> <%= Html.ListBox("recipient_roles") %> <%= Html.ValidationMessage("selected_recipient_roles")%> <label for="is_urgent"> Urgent?</label> <%= Html.CheckBox("is_urgent") %> <%= Html.ValidationMessage("is_urgent")%> </fieldset> <fieldset> <legend>Message Text</legend> <%= Html.TextArea("message_text") %> <%= Html.ValidationMessage("message_text")%> </fieldset> <input type="reset" name="reset" id="reset" value="Reset" /> <input type="submit" name="action" id="send_message" value="Send" /> <% } %> <span id="navigation_bottom"> <%= Html.ActionLink("\\Home", "Index", "Home") %><%= Html.ActionLink("\\Messages", "Home") %></span> </asp:Content> <asp:Content ID="Content3" ContentPlaceHolderID="Scripts" runat="server"> </asp:Content> I have a parameterless ActionResult in my MessagesController like this: [Authorize] public ActionResult ComposeMessage() { ModelClasses.Messages.ComposeMessage FormData = new ModelClasses.Messages.ComposeMessage(); Common C = (Common)Session["Common"]; FormData.recipients = new MultiSelectList(C.AvailableUsers, "Key", "Value"); FormData.recipient_roles = new MultiSelectList(C.AvailableRoles, "Key", "Value"); return View(FormData); } ...and my model-based controller looks like this: [Authorize, AcceptVerbs(HttpVerbs.Post)] public ActionResult ComposeMessage(DCASS3.Classes.Messages.ComposeMessage FormData) { DCASSUser CurrentUser = (DCASSUser)Session["CurrentUser"]; Common C = (Common)Session["Common"]; //... (business logic) return View(FormData); } Problem is, I can access the page fine before a submit. When I actually make selections and press the submit button, however, I get: Server Error in '/' Application. No parameterless constructor defined for this object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.MissingMethodException: No parameterless constructor defined for this object. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [MissingMethodException: No parameterless constructor defined for this object.] System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck) +0 System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache) +86 System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache) +230 System.Activator.CreateInstance(Type type, Boolean nonPublic) +67 System.Activator.CreateInstance(Type type) +6 System.Web.Mvc.DefaultModelBinder.CreateModel(ControllerContext controllerContext, ModelBindingContext bindingContext, Type modelType) +307 System.Web.Mvc.DefaultModelBinder.BindSimpleModel(ControllerContext controllerContext, ModelBindingContext bindingContext, ValueProviderResult valueProviderResult) +495 System.Web.Mvc.DefaultModelBinder.BindModel(ControllerContext controllerContext, ModelBindingContext bindingContext) +473 System.Web.Mvc.DefaultModelBinder.GetPropertyValue(ControllerContext controllerContext, ModelBindingContext bindingContext, PropertyDescriptor propertyDescriptor, IModelBinder propertyBinder) +45 System.Web.Mvc.DefaultModelBinder.BindProperty(ControllerContext controllerContext, ModelBindingContext bindingContext, PropertyDescriptor propertyDescriptor) +642 System.Web.Mvc.DefaultModelBinder.BindProperties(ControllerContext controllerContext, ModelBindingContext bindingContext) +144 System.Web.Mvc.DefaultModelBinder.BindComplexElementalModel(ControllerContext controllerContext, ModelBindingContext bindingContext, Object model) +95 System.Web.Mvc.DefaultModelBinder.BindComplexModel(ControllerContext controllerContext, ModelBindingContext bindingContext) +2386 System.Web.Mvc.DefaultModelBinder.BindModel(ControllerContext controllerContext, ModelBindingContext bindingContext) +539 System.Web.Mvc.ControllerActionInvoker.GetParameterValue(ControllerContext controllerContext, ParameterDescriptor parameterDescriptor) +447 System.Web.Mvc.ControllerActionInvoker.GetParameterValues(ControllerContext controllerContext, ActionDescriptor actionDescriptor) +173 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +801 System.Web.Mvc.Controller.ExecuteCore() +151 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +105 System.Web.Mvc.ControllerBase.System.Web.Mvc.IController.Execute(RequestContext requestContext) +36 System.Web.Mvc.<c_DisplayClass8.b_4() +65 System.Web.Mvc.Async.<c_DisplayClass1.b_0() +44 System.Web.Mvc.Async.<c__DisplayClass81.<BeginSynchronous>b__7(IAsyncResult _) +42 System.Web.Mvc.Async.WrappedAsyncResult1.End() +140 System.Web.Mvc.Async.AsyncResultWrapper.End(IAsyncResult asyncResult, Object tag) +54 System.Web.Mvc.Async.AsyncResultWrapper.End(IAsyncResult asyncResult, Object tag) +40 System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +52 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +36 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8677678 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082 This error shows up before I can trap it. I have no idea where it's choking, or what it's choking on. I don't see any point of this model that cannot be created with a parameterless constructor, and I can't find out where it's dying... Help is appreciated, thanks. -Jeremy

  Read the article

• Dojo - How to position tooltip close to text?

  - by user244394

  Like the title says i want to be able to display the tooltip close to the text, currently it is displayed far away in the cell. Tobe noted the tooltip positions correctly for large text, only fails for small text. In DOJO How can i position the tooltip close to the text? I have this bit of code snippet that display the tooltip in the grid cells. Screenshot attached, html <div class="some_app claro"></div> ... com.c.widget.EnhancedGrid = function ( aParent, options ) { var grid, options; this.theParentApp = aParent; dojo.require("dojox.grid.EnhancedGrid"); dojo.require("dojox.grid.enhanced.plugins.Menu"); dojo.require("dojox.grid.enhanced.plugins.Selector"); dojo.require("dojox.grid.enhanced.plugins.Pagination"); dojo.require("dojo.store.Memory"); dojo.require("dojo.data.ObjectStore"); dojo.require("dojo._base.xhr"); dojo.require("dojo.domReady!"); dojo.require("dojo.date.locale"); dojo.require("dojo._base.connect"); dojo.require("dojox.data.JsonRestStore"); dojo.require("dojo.data.ItemFileReadStore"); dojo.require("dijit.Menu"); dojo.require("dijit.MenuItem"); dojo.require('dijit.MenuSeparator'); dojo.require('dijit.CheckedMenuItem'); dojo.require('dijit.Tooltip'); dojo.require('dojo/query'); dojo.require("dojox.data.QueryReadStore"); // main initialization function this.init = function( options ) { var me = this; // default options var defaultOptions = { widgetName: ' Enhancedgrid', render: true, // immediately render the grid draggable: true, // disables column dragging containerNode: false, // the Node to hold the Grid (optional) mashupUrl: false, // the URL of the mashup (required) rowsPerPage: 20, //Default number of items per page columns: false, // columns (required) width: "100%", // width of grid height: "100%", // height of grid rowClass: function (rowData) {}, onClick: function () {}, headerMenu: false, // adding a menu pop-up for the header. selectedRegionMenu: false, // adding a menu pop-up for the rows. menusObject: false, //object to start-up the menus using the plug-in. sortInfo: false, // The column default sort infiniteScrolling: false //If true, the enhanced grid will have an infinite scrolling. }; // merge user provided options me.options = jQuery.extend( {}, defaultOptions, options ); // check we have minimum required options if ( ! me.options.mashupUrl ){ throw ("You must supply a mashupUrl"); } if ( ! me.options.columns ){ throw ("You must supply columns"); } // make the column for formatting based on its data type. me.preProcessColumns(); // create the Contextual Menu me.createMenu(); // create the grid object and return me.createGrid(); }; // Loading the data to the grid. this.loadData = function () { var me = this; if (!me.options.infiniteScrolling) { var xhrArgs = { url: me.options.mashupUrl, handleAs: "json", load: function( data ){ var store = new dojo.data.ItemFileReadStore({ data : {items : eval( "data."+me.options.dataRoot)}}); store.fetch({ onComplete : function(items, request) { if (me.grid.selection !== null) { me.grid.selection.clear(); } me.grid.setStore(store); }, onError : function(error) { me.onError(error); } }); }, error: function (error) { me.onError(error); } }; dojo.xhrGet(xhrArgs); } else { dojo.declare('NotificationQueryReadStore', dojox.data.QueryReadStore, { // // hacked -- override to map to proper data structure // from mashup // _xhrFetchHandler : function(data, request, fetchHandler, errorHandler) { // // TODO: need to have error handling here when // data has "error" data structure // // // remap data object before process by super method // var dataRoot = eval ("data."+me.options.dataRoot); var dataTotal = eval ("data."+me.options.dataTotal); data = { numRows : dataTotal, items : dataRoot }; // call to super method to process mapped data and // set rowcount // for proper display this.inherited(arguments); } }); var queryStore = new NotificationQueryReadStore({ url : me.options.mashupUrl, urlPreventCache: true, requestMethod : "get", onError: function (error) { me.onError(error); } }); me.grid.setStore(queryStore); } }; this.preProcessColumns = function () { var me = this; var options = me.options; for (i=0;i<this.options.columns.length;i++) { if (this.options.columns[i].formatter==null) { switch (this.options.columns[i].datatype) { case "string": this.options.columns[i].formatter = me.formatString; break; case "date": this.options.columns[i].formatter = me.formatDate; var todayDate = new Date(); var gmtTime = c.util.Date.parseDate(todayDate.toString()).toString(); var gmtval = gmtTime.substring(gmtTime.indexOf('GMT'),(gmtTime.indexOf('(')-1)); this.options.columns[i].name = this.options.columns[i].name + " ("+gmtval+")"; } } if (this.options.columns[i].sortDefault) { me.options.sortInfo = i+1; } } }; // create GRID object using supplied options this.createGrid = function () { var me = this; var options = me.options; // create a new grid this.grid = new dojox.grid.EnhancedGrid ({ width: options.width, height: options.height, query: { id: "*" }, keepSelection: true, formatterScope: this, structure: options.columns, columnReordering: options.draggable, rowsPerPage: options.rowsPerPage, //sortInfo: options.sortInfo, plugins : { menus: options.menusObject, selector: {"row":"multi", "cell": "disabled" }, }, //Allow the user to decide if a column is sortable by setting sortable = true / false canSort: function(col) { if (options.columns[Math.abs(col)-1].sortable) return true; else return false; }, //Change the row colors depending on severity column. onStyleRow: function (row) { var grid = me.grid; var item = grid.getItem(row.index); if (item && options.rowClass(item)) { row.customClasses += " " +options.rowClass(item); if (grid.selection.selectedIndex == row.index) { row.customClasses += " dojoxGridRowSelected"; } grid.focus.styleRow(row); grid.edit.styleRow(row); } }, onCellMouseOver: function (e){ // var pos = dojo.position(this, true); // alert(pos); console.log( e.rowIndex +" cell node :"+ e.cellNode.innerHTML); // var pos = dojo.position(this, true); console.log( " pos :"+ e.pos); if (e.cellNode.innerHTML!="") { dijit.showTooltip(e.cellNode.innerHTML, e.cellNode); } }, onCellMouseOut: function (e){ dijit.hideTooltip(e.cellNode); }, onHeaderCellMouseOver: function (e){ if (e.cellNode.innerHTML!="") { dijit.showTooltip(e.cellNode.innerHTML, e.cellNode); } }, onHeaderCellMouseOut: function (e){ dijit.hideTooltip(e.cellNode); }, }); // ADDED CODE FOR TOOLTIP var gridTooltip = new Tooltip({ connectId: "grid1", selector: "td", position: ["above"], getContent: function(matchedNode){ var childNode = matchedNode.childNodes[0]; if(childNode.nodeType == 1 && childNode.className == "user") { this.position = ["after"]; this.open(childNode); return false; } if(matchedNode.className && matchedNode.className == "user") { this.position = ["after"]; } else { this.position = ["above"]; } return matchedNode.textContent; } }); ... //Construct the grid this.buildGrid = function(){ var datagrid = new com.emc.widget.EnhancedGrid(this,{ Url: "/dge/api/-resultFormat=json&id="+encodeURIComponent(idUrl), dataRoot: "Root.ATrail", height: '100%', columns: [ { name: 'Time', field: 'Time', width: '20%', datatype: 'date', sortable: true, searchable: true, hidden: false}, { name: 'Type', field: 'Type', width: '20%', datatype: 'string', sortable: true, searchable: true, hidden: false}, { name: 'User ID', field: 'UserID', width: '20%', datatype: 'string', sortable: true, searchable: true, hidden: false } ] }); this.grid = datagrid; };

  Read the article

• OSX launchd plist for node forever process

  - by lostintranslation

  I am trying to write a launchd.plist file for my node server. I am using forever to run my node server. I would like the server to start on boot. I would also like to wait for the mongodb launchd plist to run first. I installed mongobb using homebrew and it came with a launchd.plist already. I have executed the following: $ launchctl load ~/Library/LaunchAgents/homebrew.mxcl.mongodb.plist plist for mongodb is: <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>homebrew.mxcl.mongodb</string> <key>ProgramArguments</key> <array> <string>/usr/local/opt/mongodb/mongod</string> <string>run</string> <string>--config</string> <string>/usr/local/etc/mongod.conf</string> </array> <key>RunAtLoad</key> <true/> <key>KeepAlive</key> <false/> <key>WorkingDirectory</key> <string>/usr/local</string> <key>StandardErrorPath</key> <string>/usr/local/var/log/mongodb/output.log</string> <key>StandardOutPath</key> <string>/usr/local/var/log/mongodb/output.log</string> <key>HardResourceLimits</key> <dict> <key>NumberOfFiles</key> <integer>1024</integer> </dict> <key>SoftResourceLimits</key> <dict> <key>NumberOfFiles</key> <integer>1024</integer> </dict> </dict> </plist> If I shutdown the computer and restart mongodb fires up as it should. However my node server is not starting. Any ideas? <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>KeepAlive</key> <dict> <key>SuccessfulExit</key> <false/> </dict> <key>Label</key> <string>com.test.app</string> <key>ProgramArguments</key> <array> <string>/usr/local/bin/forever</string> <string>-a</string> <string>-l</string> <string>/var/log/app/app.log</string> <string>-e</string> <string>/var/log/app/app_error.log</string> <string>/data/server/app.js</string> </array> <key>RunAtLoad</key> <true/> <key>StartInterval</key> <integer>3600</integer> </dict> </plist> EDIT: writing to log file and I see this: env: node: No such file or directory I think this means that the node binary cannot be found. I can echo $PATH and /usr/local/bin is in my path. I can start node from the terminal. Ideas?

  Read the article

< Previous Page | 508 509 510 511 512 513 514 515 516  | Next Page >