Search Results

Search found 22600 results on 904 pages for 'remote connection'.

Page 513/904 | < Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >

• Wireless Problem on Acer Aspire 5610z

  - by Ugur Can Yalaki

  I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

  Read the article

• HTG Explains: How Software Installation & Package Managers Work On Linux

  - by Chris Hoffman

  Installing software on Linux involves package managers and software repositories, not downloading and running .exe files from websites like on Windows. If you’re new to Linux, this can seem like a dramatic culture shift. While you can compile and install everything yourself on Linux, package managers are designed to do all the work for you. Using a package manager makes installing and updating software easier than on Windows. How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

  Read the article

• JPA and NoSQL using EclipseLink - MongoDB supported

  - by arungupta

  EclipseLink 2.4 has added JPA support for NoSQL databases, MongoDB and Oracle NoSQL are the first ones to make the cut. The support to other NoSQL database can be extended by adding a EclipseLink EISPlatform class and a JCA adapter. A Java class can be mapped to a NoSQL datasource using the @NoSQL annotation or <no-sql> XML element. Even a subset of JPQL and the Criteria API are supported, dependent on the NoSQL database's query support. The connection properties are specified in "persistence.xml". A complete sample showing how JPA annotations are mapping and using @NoSQL is explained here. The MongoDB-version of the source code can also be checked out from the SVN repository. EclipseLink 2.4 is scheduled to be released with Eclipse Juno in June 2012 and the complete set of supported features is described on their wiki. The milestone and nightly builds are already available. Do you want to try with GlassFish and let us know ?

  Read the article

• Cannot connect to Onda GSM phone using network-manager

  - by marcobra

  On Oneiric unstable fully updated/upgraded using network-manager broadband connection with: ID 19d2:1015 ONDA Communication S.p.A. I want some hints to make a Onda GSM usbkey 19d2:1015 work? route show me Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 usb0 link-local * 255.255.0.0 U 1000 0 0 usb0 It connects and the usb0 device get ip-address from the provider but I cannot get webpages (also typing a known ip in firefox) It seem to be something about routing default gw, there is no active firewall on this pc btw, all works using sakis3g or wvdial or gnome-ppp

  Read the article

• Different database for Membership and our web data or use just one?

  - by Jesus Rodriguez

  Is better to keep our Membership stuff on the DefaultConnection and create another connection (another database) for our data? Or just one database for all? If I have a MyAppContext and I want migrations for that context, It seems that I cannot have migrations for UserContext (In other words, I can just migrate one context) So, having two different databases I can migrate or the users (maybe membership migration is weird) or the web data. Or, I can mix the UserContext and MyAppContext in one UserAndAppContext and migrate all in one place, but this mixing also seems weird. What's the normal way to do this, one or two databases and what should be migrated?

  Read the article

• HTG Explains: The Linux Directory Structure Explained

  - by Chris Hoffman

  If you’re coming from Windows, the Linux file system structure can seem particularly alien. The C:\ drive and drive letters are gone, replaced by a / and cryptic-sounding directories, most of which have three letter names. The Filesystem Hierarchy Standard (FHS) defines the structure of file systems on Linux and other UNIX-like operating systems. However, Linux file systems also contain some directories that aren’t yet defined by the standard. How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• DB DOC Enhancements for Oracle SQL Developer v4

  - by thatjeffsmith

  One of our more popular features is ‘DB Doc.’ It’s like JAVADOC for the database. Pick a connection, right-click, and go. It will generate an HTML documentation set for that schema. For version 4, we’ve introduced a few enhancements based on user requests. That’s right, you asked, and we listened. Added support for Package Bodies Added parallelization option for larger doc sets Enhanced the HTML formatting a bit Select Your Object Types and Generation Options We’ve changed the default selection of object types to be included and added support for package bodies There’s also an option to auto-open the documentation set after it’s been generated. And the HTML As Requested

  Read the article

• how to improve concepts for interview

  - by Rahul Mehta

  Hi, I had given the interview , and interviewer tell me to improve the concepts , e.g. he ask me type of array ,and i answered two types of array simple array and associative array . e.g. 2 he ask me why you use pdo , and i answered we can use any database e.g. oracle , mysql and it helps in sql injection , then he ask me how it helps in sql injection then i was not having correct answer. e.g. 3 he ask me about persistent connection , i just use the mysql_pconnect i dont where it will be used and how . is there is any standard way to follow to improve concepts. Please suggest . Thanks

  Read the article

• Display root node of Hierarchical Tree using ADF - EJB DC

  - by arul.wilson(at)oracle.com

  Displaying Employee (HR schema) records in Hierarchical Tree can be achieved in ADF-BC by creating custom VO and a Viewlink for displaying root node. This can be more easily done using  EJB-DC by just introducing a NamedQuery to get the root node.Here you go to get this scenario working.Create DB connection based on HR schema.Create Entity Bean from Employees Table.Add custom NamedQuery to Employees.java bean, this named query is responsible for fetching the root node (King in this example). @NamedQueries({  @NamedQuery(name = "Employees.findAll", query = "select o from Employees o"),  @NamedQuery(name = "Employees.findRootEmp", query = "select p from Employees p where p.employees is null")}) Create Stateless Session Bean and expose the Named Queries through the Session Facade.Create Datacontrol from SessionBean local interface.Create jspx page in ViewController project.Drop employeesFindRootEmp from Data Controls Palette as ADF Tree.Add employeesList as Tree level rule.Run page to see the hierarchical tree with root node as 'King'

  Read the article

• Could anyone help me get my NETGEAR WNA3100 (Broadcom BCM43231) wireless adapter to work?

  - by Matthew Carroll

  I have just moved back to Ubuntu from Windows 7 and a few months ago, I bought a NETGEAR WNA3100 wireless adapter because my old adapter had broken. I plugged in my adapter and it doesn't seem to work, I also used the windows 7 drivers for it and tried them on the program "Windows Wireless Drivers" and they don't seem to recognize the device. However I have heard you need XP drivers but I can't seem to find them on the internet nor find them on the CD. Could anyone help me get my wireless adapter to work? Any help is greatly appreciate. P.S I do have internet connection though I have to tether my phone to my computer and then connect my phone to my router.

  Read the article

• Website Access...DNS, ISP, issue?

  - by sublet

  This isn't so much a code issue as it might be an issue with my ISP. For some reason when I visit a site very often, like one I manage or write stories on, it will just stop pulling data down after a while. It's very random when it happens, but probably happens once a week. If effects everyone who is accessing the site from this connection, and I can access other sites no problem. Also, if I go outside the office back home, which is right down the street, and access the site it is fine. I'm using Comcast in both locations. It's almost as if I have a limit on requests to each site and have hit my limit so it blocks the site for a while. Anybody have any clue what this might be?

  Read the article

• HTTPS Everywhere Extension Updates to Version 3.0, Adds Protection for 1,500 More Websites

  - by Asian Angel

  If one of your security goals is to encrypt your communication with websites as much as possible, then you will definitely be pleased with the latest update to the HTTPS Everywhere extension for Firefox and Chrome. This latest release adds encryption protection for an additional 1,500 websites to help make your browsing experience more secure than ever. Images shown above courtesy of EFF. You can learn more about this latest release along with installing the extension for Firefox and/or Chrome directly from the blog post linked below… HTTPS Everywhere 3.0 protects 1,500 more sites [via Softpedia] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• That pestky Intel Centrino wireless N + WiMAX 6150 wireless card

  - by newb26

  I'm new to linix and just got Ubuntu up and running on my ASUS laptop last night. Aside from the wireless everything seems to be working. The card is able to recognize networks but cannot make a full connection. After I enter my password it will try to connect before asking for the password again after a few minutes. I know the issue isn't the password because I checked that I had the right one. I've done some poking around trying to find a way to get it work. Linix recognizes the card as well. I found a link to some drivers in a question someone had about a WiMAX 6250 card and am curious if anyone knows if they would also work for the 6150 I have in my machine: https://github.com/ago/wimax-tools If not what can I do?

  Read the article

• vb.net and mysql connectivity [closed]

  - by kalpana

  I have used adodb using odbc database connectivity for connecting vb.net to mysql. I have fetched table values into recordset. I want to fetch only one column values (for example, table name-login, column name-password and values in password column are "manage","sales","general"). I want to fetch these values in text boxes. I have written code but it's not working. Dim conn As New ADODB.Connection Dim res As New ADODB.Recordset conn.Open("test", "root", "root") res = conn.Execute("select password from login") textbox1.text=res(0).value textbox2.text=res(1).value textbox3.text=res(2).value I am getting data in textbox1 but other data is not getting inserted into textbox2 and textbox3..I am getting error i.e (1) Item cannot be found in the collection corresponding to the requested name or ordinal.

  Read the article

• How can I add the softwares I have installed from USC of kubuntu 12.04 into kubuntu 12.10 iso installation file

  - by Suhail cholassery

  I am currently using Kubuntu 12.04. I don't have strong high speed Internet connection and managed to get Kubuntu 12.10. I found that it's size is about 1GB. I have a lot of softwares installed in my current Kubuntu 12.04 via Ubuntu Software Center I would like to Add these software to Kubuntu 12.10 installation iso file. I don't want to download packages from Ubuntu customization kit (UCK) or similar software. I don't prefer using APTonCD or similar software. What I want is to add these software into this Kubuntu 12.10, so that they appear along with the default application which will be installed as default when the OS is installed. Is this possible?

  Read the article

• farseer physics xbox samples not working

  - by Hugh

  I have downloaded a few of the sample projects from the official farseer physics website and i just cant get them to run on my xbox. -My connection to the xbox is fine, other xbox projects debug fine on my xbox -I have tried running both the xbox versions of the samples (for example the farseer hello world sample project) and the windows version by right-clicking the project and making a copy for xbox. I get a bunch of errors but what i always get is "unreachable code detected" referring to code in the farseer library, it seems to be a problem to do with referencing/linking the farseer library to the main game project. Help please!

  Read the article

• web server response code 500

  - by Bryan Kemp

  I realize that this may spur a religious discussion, but I discussed this with friends and get great, but conflicting answers and the actual documentation is of little help. What does the 500 series response codes mean from the webserver? Internal Server Error, but that is vague. My assumption is that it means that something bad happened to the server (file system corruption, no connection to the database, network issue, etc.) but not specifically a data driven error (divide by zero, record missing, bad parameter, etc). Something to note, there are some web client implementations (the default Android and Blackberry httpclients) that do not allow access to the html boddy if the server response is 500 so there is no way to determine what caused the issue from the client. What I have been been implementing recently is a web service that returns a json payload wrapped in a response object that contains more specific error information if it is data related, but the server response will be 200 since it finished the actual processing. Thoughts?

  Read the article

• Hamachi² configuration file... Where is it?

  - by Cinaed666

  I recently installed hamachi² and haguichi on my 10.10 machine. It works, but it loses its connection every few minutes and I have to reconnect. I looked into this, and apparently I need to set the KeepAlive in the configuration file to 100. This shouldn't be a hard task, so I looked for the hamachi directory. I checked the obvious place: /home/username/.hamachi ... but this directory doesn't exist. (Yes, I did enable hidden files.) After doing a file search for hamachi, it returned nothing either. I'm in the dark here, what am I missing?

  Read the article

• How do I route my SMTP outgoing mail through gmail (Google Mail) ?

  - by Paula DiTallo

  Here is the quick answer:  Go into your client e software (e.g. Outlook, Thunderbird, etc.) for the account you are working on (usually default). Set the SMTP server to smtp.gmail.com Set the username as your gmail account user name (e.g. [email protected]). Gmail will need the username and password you use for that account, so if your default is set to some other email, be sure to set the username and password to that value, or click on the checkbox for username/password. Check TLS as the secure connection.   If you are looking for more in-depth info, check out Gina Trapani 's block on the topic.

  Read the article

• Webhosting for a TV channel with streaming video

  - by Murtez

  Hi guys, I'm making a website for a web based TV channel, so I'm assuming it will be heavy on bandwidth usage, but I'm no good at calculating bandwidth. Couple of questions: Assuming the site streams HD video 24 / 7 to 1000 people, how much bandwidth is that? Where should something like this be hosted? The channel will have a fiber internet optic connection, but I don't know the limit on their bandwidth, would it be better to get their own server or host online? In either case in question 2, any recommendations? I'm usually a regular web designer for minor businesses, so this is a new level. Your help is appreciated.

  Read the article

• How to Follow a Twitter Feed in Your RSS Reader

  - by Lori Kaufman

  You probably have an RSS reader you really like and several feeds you follow. We encountered a situation recently where we had a Twitter feed for free eBooks (HundredZeros), but no RSS feed on the website and no RSS button on the Twitter feed. NOTE: See our recent article about HundredZeros for more information about it. We wanted to add the Twitter feed for HundredZeros (https://twitter.com/#!/HundredZeros) to our RSS reader so all our feeds are available in a centralized place. However, you can’t simply paste the URL for the Twitter feed into your RSS reader. You must determine the ID for the Twitter name first. There is a site, called TwIDder, that allows you to convert from a Twitter username to the corresponding ID and from an ID to a Twitter username. Go to the following URL: How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• Bluetooth not detected on Asus X401A / Ubuntu 12.10

  - by Majster-pl

  I have Asus X401A ( according to specs bluetooth is build-in to this laptop, http://www.asus.com/Notebooks/Versatile_Performance/X401A/#specifications ) Bluetooth in global settings is gray ( unable to turn it on ) rfkill list output: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no cat /var/log/dmesg | grep Blue* [ 5.895791] Bluetooth: Core ver 2.16 [ 5.895807] Bluetooth: HCI device and connection manager initialized [ 5.895809] Bluetooth: HCI socket layer initialized [ 5.895810] Bluetooth: L2CAP socket layer initialized [ 5.895814] Bluetooth: SCO socket layer initialized [ 5.909618] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.909621] Bluetooth: BNEP filters: protocol multicast [ 5.910020] Bluetooth: RFCOMM TTY layer initialized [ 5.910024] Bluetooth: RFCOMM socket layer initialized [ 5.910025] Bluetooth: RFCOMM ver 1.11 hcitool dev Devices: (empty) My wifes laptop Asus K53 have the same problem Ubuntu 12.04 LTS Any help please ?

  Read the article

• How to send credentials to linkedIn website and get oauth_verifier without signing in again [closed]

  - by akash kumar

  I am facing a problem sending credentials to another website so that I can login the user (automatically, not clicked on sign in here) and get an oauth_verifier value. I want to send the email address and the password through a form (submit button) from my website (e.g. a Liferay portal) to another website (e.g. LinkedIn), so that it automatically returns an oauth_verifier to my website. That means I don't want the user of my website to submit his email and password to LinkedIn again. My goal is to take the email and password of the user in my website and show the user his LinkedIn connection, message, job posting (again, in my website, not LinkedIn). I dont want the user redirected to the LinkedIn website to sign in there and then come back to my website. I have taken a consumer key and a secret key from LinkedIn for my web aplication. I am using the LinkedIn API and getting oauth_verifier for access token but in order to login, I have to take user to LinkedIn to sign in, while I want it to happen in the backend.

  Read the article

• How Microwave Ovens Work [Video]

  - by Jason Fitzpatrick

  In this informative how-it-works video, we’re treated to a peek inside the common microwave and the science behind the magnetron that powers it. Bill details how a microwave oven heats food. He describes how the microwave vacuum tube, called a magnetron, generates radio frequencies that cause the water in food to rotate back and forth. He shows the standing wave inside the oven, and notes how you can measure the wavelength with melted cheese. He concludes by describing how a magnetron generates radio waves. [via Make] How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

  Read the article

• Ubuntu 12.04 Problem connecting Internet by Mobile Broadband through LG GU220

  - by arnab.b

  I am using Ubuntu 12.04. I use my LG cellphone titled GU220 using Aircel connection .. The phone gets connected as an USB device well enough bt the network always fails to connect whenever I try to connect through mobile broadband.. I also have Windows 7 which does not fails to connect the network through PC Suite. tried it several times even after restarting both phone and Ubuntu bt in vain. Also fr 1st two days things worked well and the network was well connected, the problem started just after those two days-in from the next login..

  Read the article

< Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >