Search Results

Search found 28922 results on 1157 pages for 'ubuntu gnome remix'.

Page 513/1157 | < Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >

• hp pavilion g6 1250 with a BCM 4313 doesn't see any wireless networks

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation, ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) There are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• dpkg E: Sub-process /usr/bin/dpkg returned an error

  - by user81269

  I decided to shift around my partitions on my hard drive for a fresh install of Kubuntu. I booted my Ubuntu 10.10 live disc, shifted everything around and attempted to install grub and it didn't work, so I burnt an Ubuntu 12.04 disc and installed it. I got the computer working and wanted to install some packages, but didn't have an internet connection at the time. So (I know this was stupid) I got some debs from previous versions of Ubuntu, as I needed my music, and the other install took a long of time to boot. Once I got my internet connection back, everything worked ok, for a little while. Then I stumbled upon this problem after removing ten broken packages using synaptic: drhax@Spamotard:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: libgtk2.0-cil 0 upgraded, 0 newly installed, 1 to remove and 417 not upgraded. 1 not fully installed or removed. After this operation, 2,638 kB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 103052 files and directories currently installed.) Removing libgtk2.0-cil ... E: File does not exist: /usr/share/cli-common/packages.d/policy.2.6.gtk-dotnet.installcligac dpkg: error processing libgtk2.0-cil (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: libgtk2.0-cil E: Sub-process /usr/bin/dpkg returned an error code (1) Help would be appreciated. This is my first post, but I do know fair bit about Ubuntu, so feel free to point out any stupid mistakes I have made.

  Read the article

• no dual screens with 11.10 and Asus m4A89 GTD Pro

  - by Alex

  I'm having an issue getting dual monitors working for Kubuntu 11.10. I have Asus m4A89 GTD pro/USB3 mother board with integrated Ati HD4290 graphics chip. When I try to enable multiple monitors through the system settings, it says "This module is only for configuring systems with a single desktop spread across multiple monitors. You do not appear to have this configuration." I had previously attempted to fix this problem with another installation of Ubuntu 11.10, but ended up having to reinstall ubuntu because i messed up the software center dependencies. After I installed Ubuntu the first time, a notification showed up asking me to install an Ati graphics driver. I installed this driver, then restarted, and dual monitors did not work. That was when I went to the ATI site and attempted to install the fglrx driver. When I tried to run the shell script for the fglrx driver, it said i had a previous version of an fglrx driver installed, and needed to remove it in order to install the new one. So I looked up some tutorial on how to remove it and found some apt-get remove command, which i ran. Then I was able to install the new driver. Dual monitors still did not work, and i couldn't use the software center any more because it was corrupted and was unable to repair itself. So i just reinstalled ubuntu, and now i'm trying to go about this the correct way. Does anyone have this same configuration and which driver works for you?

  Read the article

• Thunderbird uses the wrong browser

  - by Aaron Digulla

  I'm unable to make Thunderbird open the default browser. In the browser preferences, Chromium is selected as the default browser. It's also selected in "Default Applications" in System Settings. In Thunderbird, I read "Chrome (Default)" which is wrong on all levels: Chrome itself complains that it's not the default browser when I click a link inside Thunderbird. In all other places, that I could find, Chromium is the default Here is what I tried: I used update-alternatives --config x-www-browser to select chromium-browser as well (see How do I change the default browser?). And even when I select a different browser from the list in the Thunderbird preferences, it still opens Chrome. My current solution is to create a link from /usr/bin/google-chrome to chromium-browser. How can I force Thunderbird to use the browser I want??? EDIT I also updated gnome-www-browser (update-alternatives --config gnome-www-browser) after feedback from roadmr but that didn't help. At least sensible-browser opens Chromium, now, but Thunderbird is stubborn.

  Read the article

• Ougoing telnet: Unable to connect to remote host: Connection refused

  - by brendan

  I am trying to telnet from Ubuntu server (running Maverick) on ec2 to another machine I have set up not on ec2 - we'll call it "server-x". The two machines are connected via vpn. I can ping from the ec2 machine to server-x no problem. On another machine also on the vpn but also not on ec2 I can telnet to server-x without issue so it is accepting incoming connections on that port. But when I run telnet from the ubuntu instance to server-x I get : ubuntu@ip-10-111-11-11:~$ telnet 5.1.1.1 9143 Trying 5.1.1.1... telnet: Unable to connect to remote host: Connection refused Other telnets work like this: ubuntu@ip-10-111-11-11:~$ telnet imap.gmail.com 993 Trying 173.194.76.108... Connected to gmail-imap.l.google.com. Escape character is '^]'. I have disabled ufw on the ubuntu machine. Is there anything else that can be blocking this outgoing connection? I tried adding the outgoing port to iptables but I'm not certain I'm doing that right.

  Read the article

• Subversion 1.7 on 12.04 precise: libsasl error, compiling from source?

  - by Andrew Mao

  Background: I am a longtime Gentoo user, and this is my first time using Ubuntu (installed on a VM to avoid compiling everything from scratch). I am familiar with a Linux environment but somewhat unfamiliar with Ubuntu. I am trying to install Subversion 1.7 on Ubuntu and saw this post: Where can I find a Subversion 1.7 binary? The above post recommends using the PPA ppa:dominik-stadler/subversion-1.7. I also found the PPA ppa:svn/ppa from another link. They both cause problems for me. The issue is that any svn operation using the remote server causes the following error: svn: E170001: Unable to connect to a repository at URL 'svn+ssh://my_repo' svn: E170001: Could not create SASL context: generic failure: No such file or directory This seems to arise from a recent bug involving SVN dependency on the libsasl library, as documented by Debian users here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=683555 and also Mac users here: https://trac.macports.org/ticket/34861 Resolution seems to involve either updating the cyrus-sasl or libsasl library to a newer version (neither of which is in the latest apt packages), or compiling subversion without SASL support. As a Gentoo user I started looking into how to compile svn from source, but it looks way more complicated on Ubuntu than I'm used to and I'm not sure what the canonical way is. My questions: Is there an obvious fix for this problem that I am overlooking? Is there a way to update the dependencies for SVN to something that works through using synaptic or apt-get? If I want to compile from scratch, how do I use the sources in the PPA instead of downloading my own source copy (i.e. the PPA has both binary and sources?)

  Read the article

• hp pavilion g6 1250 wireless problems

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation , ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) there are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Fix corrupt NTFS partition without Windows

  - by Capt.Nemo

  MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

  Read the article

• How to improve battery life on Samsung 13.3” Series 7 Ultra (NP730U3E-S01AU)?

  - by beam022

  Recently I've bought a Series 7 Ultra Samsung ultrabook and decided to change the OS from originally installed Windows 8 to Ubuntu 14.04LTS. However, it's difficult not to notice great decrease in battery life: on pre-installed Windows 8 battery would last for about 6 hours while on Ubuntu it's almost empty after 2 hours of same kind of work (wi-fi, web, vlc, spotify, intellij idea). I'm not here to say that Ubuntu's battery performance is worse than Windows, but to ask for suggestions how to improve the situation (2 hours of work is pretty poor battery life). Can you recommend some sources, applications or tips/tricks that would improve battery life on my ultrabook? I really like the Ubuntu experience, but this makes my machine much less reliable. I suspect that graphic video card might be one of the issues here. Let me give you tech specs of the ultrabook: Processor: Intel® Core™ i5 Processor 3337U (1.80GHz, 3MB L3 Cache) Chipset: Intel HM76 Graphic: AMD Radeon™ HD 8570M Graphics with 1GB gDDR3 Graphic Memory (PowerExpress) and Intel(R) HD Graphics 4000 Display: 13.3" SuperBright+ 350nit FHD LED Display (1920 x 1080), Anti-Reflective Memory: 10GB DDR3 System Memory at 1,600MHz Hard-drive: 128GB Solid-state Drive More informations here, on the official page. If it's helpful to provide additional info, I'm happy to do it, just let me know what you need. Thank you.

  Read the article

• How do I get my blacked out ttys back?

  - by con-f-use

  Original Question: After I replaced my Ubuntu 10.10 with 11.04 all I get when I Strg+Alt+F1-6 into a tty is a black screen. Also when I boot there's a while of black screen after grub2 menu is displayed. Then until just before gnome starts it stays black. I have an Nvida Geforce Quadro FX 770M on my HP EliteBook 8530w. How do I get my ttys (aka 'virtual terminals') to work again? My effords in chronological order: So grub and gfx-payload seems to be the problem, I figured. I went along with this guide for higher tty resolution. Which led to the grub2 menu displaying in my native resolution rather than 800x600. The black screen problem remains. I googlehit some bugreports on other nvidia crads having that problem. I tried uninstalling the nvidia driver. No effect. Also tried different resolutions With an older version of the kernel it works. Though not perfectly. The ttys are usable, black screen between grub2 menu and gnome start remains. Not really a solution. Tried so much, that I lost track. Reinstalled grub2 and linux-image-2.6.38-8-generic. Then did this to my /etc/default/grub in accordance with the aforementioned guide (/etc/grub.d/00_header edited as well): GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=3 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` #GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" GRUB_GFXMODE=1680x1050x32 To my surprise I can now use my ttys in native resolution. Black screen between grub2 menu and gnome login screen is still there though. That is annoying since I also use an encrypted disk thus having to enter my passphrase in total dark... Still looking for a solution but urgency is low. Downloaded and installed a later version of nvidia driver. No difference to last edit. Tried GRUB_CMDLINE_LINUX="vga="-parameter. No effect. nomodeset has no effect. not even in combination with vga=... Tried echo FRAMEBUFFER=y > /etc/initramfs-tools/conf.d/splash no effect (see comment) On the verge of resignation... Bounty period soon to end.

  Read the article

• rsync'd a folder, folder doesn't show up, but free disk space decreased

  - by Patrick

  I am currently trying to switch from mac to windows/ubuntu dual boot (on 2 seperate internal HDDs), but ran into some trouble restoring my documents. I am not sure all the information below is necessary, but if I knew how to solve it, I wouldn't ask it here. I backed up my mac before buying this laptop on an external HDD with Carbon Copy Cloner. I wanted to put these files on my user folder on my windows HDD, but I could not do that from inside windows (HFS+ format of mac), so I used rsync from inside Ubuntu to copy the documents from the ext hdd to the windows partition. It seemed like it went okay, but from inside windows (and later also Ubuntu) the folder didn't show up. My free HDD space, however, has reduced with about 200 GB (the size of the backup) when looking at the disk properties (from inside Windows and Ubuntu). rsync command I used: rsync -av /media/patrick/Toshiba\ 1.5T/Users/patrickvandenberg/ /media/patrick/Windows8_OS/Users/Patrick/MacBackup/ Folder does not exist: patrick@patrick-Lenovo-IdeaPad-Y410P:~$ cd /media/patrick/Windows8_OS/Users/Patrick/MacBackup bash: cd: /media/patrick/Windows8_OS/Users/Patrick/MacBackup: No such file or directory Size of disk: patrick@patrick-Lenovo-IdeaPad-Y410P:~$ du -hs /media/patrick/Windows8_OS/ 195G /media/patrick/Windows8_OS/ Size of disk according to Disk properties: http://i.stack.imgur.com/OteMX.png (not enough rep to insert the image)

  Read the article

• Installation taking a very long time, hangs at "Configuring bcmwl-kernel-source"

  - by user290522

  I am installing Ubuntu 14.04(32-bit) on my laptop (Compaq Presario V2000), and after about 7 hours, it is still in Configuring bcmwl-kernel-source (i386) mode. The messages I read are as follows: ubuntu kernel: [22814.858163] ACPI: \_SB_.PCI0.LPC0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported with the numbers in the square brackets increasing. I have had Windows XP professional on this laptop, and I am erasing it. I am not sure if I should turn off the laptop, and start all over again. About 4 years ago I installed Ubuntu on this laptop, and that was very fast. The only problem I encountered was my wireless, and could not make it to work, and switched back to Windows. I appreciate any comments regarding this installation taking such a long time. After 40 hours the installation was still in configuring mode with the following messages: ubuntu CRON[29329]: (root) CMD ( cd/ && run-part .. report /etc/cron-hourly) I did the following to check for errors: pressed ctrl-alt-f2. This time the system froze. I had no other choice but to turn off the laptop, and start all over again. The exact model of the laptop is "Compaq Presario V2069CL Notebook PC" with AMD processor.

  Read the article

• Could not calculate upgrade from Maverick Meerkat to Natty Narwhal

  - by xralf

  I upgraded from Ubuntu Lucid Lynx to Maverick Meerkat with the following commands: sudo apt-get update && sudo apt-get upgrade sudo apt-get install update-manager-core sudo vi /etc/update-manager/release-upgrades and changed the last line to Prompt=normal sudo do-release-upgrade -d This upgrade was OK. I decided to repeat the same steps and to upgrade Maverick Meerkat to Natty Narwhal. It ended with this message: Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: Can not mark 'xubuntu-desktop' for upgrade This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done === Command detached from window (Mon Nov 21 09:37:21 2011) === === Command terminated with exit status 1 (Mon Nov 21 09:37:21 2011) === How can I correct it?

  Read the article

• How can I make fsck run non-interactively at boot time?

  - by Nelson

  I have a headless Ubuntu 12.04 server in a datacenter 1500 miles away. Twice now on reboot the system decided it had to fsck. Unfortunately Ubuntu ran fsck in interactive mode, so I had to ask someone at my datacenter to go over, plug in a console, and press the Y key. How do I set it up so that fsck runs in non-interactive mode at boot time with the -y or -p (aka -a) flag? If I understand Ubuntu's boot process correctly, init invokes mountall which in turn invokes fsck. However I don't see any way to configure how fsck is invoked. Is this possible? (To head off one suggestion; I'm aware I can use tune2fs -i 0 -c 0 to prevent periodic fscks. That may help a little but I need the system to try to come back up even if it had a real reason to fsck, say after a power failure.) In response to followup questions, here's the pertinent details of my /etc/fstab. I don't believe I've edited this at all from what Ubuntu put there. UUID=3515461e-d425-4525-a07d-da986d2d7e04 / ext4 errors=remount-ro 0 1 UUID=90908358-b147-42e2-8235-38c8119f15a6 /boot ext4 defaults 0 2 UUID=01f67147-9117-4229-9b98-e97fa526bfc0 none swap sw 0 0

  Read the article

• How to re-configure graphics from Intel integrated to Intel / ATI switchable?

  - by Bucic

  There are lots of 'how to get switchable graphics to work' guides but I found none on how to configure a system for switchable graphics operation on Ubuntu from the ground up, nor explaining the current driver situation for particular computer models (integrated+discrete combinations). Example: https://help.ubuntu.com/community/HybridGraphics My system being mature and on Intel integrated card also makes things complicated. System information: Ubuntu 12.04 amd64, installed clean with system configured to use only the integrated Intel card Lenovo Thinkpad T500 Intel GMA 4500MHD / ATI Mobility Radeon HD 3650 Current situation: Mature and up-to-date system with no configuration changes to what's given above. I've made a backup image of the system (Clonezilla) so regardless of what's written below let's assume it's our starting point. If something in What I have already tried is not clear you may as well diregard it. What I have already tried: Configuring BIOS to switchable graphics and: Installing Additional Hardware drivers - returned an error. Installing proprietary amd-driver-installer-12.6-legacy-x86.x86_64.run automatically - system starts to 'low-graphics mode'. Tried fixing as per https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6.2C_special_case_for_Intel.2BAC8-ATI_hybrid_graphics Got lost, gave up. Please note that while configuring BIOS for integrated graphics only is pretty straightforward, configuring for switchable graphics is not.

  Read the article

• Starting a guest session from the login screen

  - by Odd-rationale

  I was wondering what is the best way to start the guest session from the login screen (GDM). Currently, I created a new user called 'ubuntu-guest' (has to be something other than 'guest'). Then added the following script to the Startup Applications. #!/bin/bash /usr/share/gdm/guest-session/guest-session-launch & /usr/bin/gnome-session-save --logout The problem with this method, is that when you log in as 'ubuntu-guest', you have to start up two gnome sessions: one for 'ubuntu-guest' and one for the actual guest account. Please let me know if you have any other better ideas. Thanks!

  Read the article

• lubuntu - audio drives not recognized

  - by TheAdnan

  still no sound after doing that.. I typed sudo dpkg -l | grep -e alsa -e pulseaudio again, and got this: ii alsa-base 1.0.25+dfsg-0ubuntu4 all ALSA driver configuration files ii alsa-utils 1.0.25-4ubuntu2 i386 Utilities for configuring and using ALSA ii gnome-alsamixer 0.9.7~cvs.20060916.ds.1-3ubuntu1 i386 ALSA sound mixer for GNOME ii gstreamer0.10-alsa:i386 0.10.36-1.1ubuntu1 i386 GStreamer plugin for ALSA ii gstreamer0.10-pulseaudio:i386 0.10.31-3+nmu1ubuntu2 i386 GStreamer plugin for PulseAudio ii pulseaudio 1:3.0-0ubuntu6 i386 PulseAudio sound server ii pulseaudio-module-x11 1:3.0-0ubuntu6 i386 X11 module for PulseAudio sound server ii pulseaudio-utils 1:3.0-0ubuntu6 i386 Command line tools for the PulseAudio sound server After the commands in 2., pulseaudio is working again, but there is still no sound.. I tried the command in 3., and here is what I got: ~$ sudo gedit /etc/default/speech-dispatcher sudo: gedit: command not found

  Read the article

• Cedarview drivers boot to a blank screen

  - by map7

  I'm following the tutorial following tutorial to get my Intel D2700DC motherboard's graphics working: http://daily.siebler.eu/2012/06/ubuntu-12-04-driver-for-intel-cedarview-atom-n2000-und-d2000-serie/ When I boot I'm getting a blank screen. I followed the tutorial and read all the comments. I've also tried: Install gdm and use this instead of lightdm (ubuntu default) sudo apt-get install gdm Remove previous pae kernel: http://www.liberiangeek.net/2011/11/remove-old-kernels-in-ubuntu-11-10-oneiric-ocelot/ Reboot before adding cedarview packages. Have tried with and without the "video=LVDS-1:d" to GRUB_CMDLINE_LINUX_DEFAULT variable in /etc/default/grub I still get a blank screen. I am plugged into a HD screen through the HDMI and have tried the DVI connector also. I can see the grub menu, then a little of the loading and then 'No signal'. I can still ssh into the box though so it is logging in. lspci -v -s 00:02.0 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device 2011 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at 80100000 (32-bit, non-prefetchable) [size=1M] I/O ports at 20d0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: pvrsrvkm Kernel modules: cedarview_gfx uname -a Linux test-desktop 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• Bridged VM guest does not get IPv6 prefix

  - by Arne

  I have a similar problem and setup as described in IPv6 does not work over bridge. My host get a IPv6 prefix but the guest VM only gets a local fe80-prefix. Using tcpdump I can see that solicit messages are going out from the guest but the host (ubuntu-server) doesn't seem to respond: arne@ubuntu-server:/var/log$ sudo tcpdump -i br0 host fe80::5054:00ff:fe4d:9ae0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on br0, link-type EN10MB (Ethernet), capture size 65535 bytes 14:31:15.314419 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 4 group record(s), length 88 14:31:15.322337 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28 14:31:15.502374 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28 14:31:15.743894 IP6 fe80::5054:ff:fe4d:9ae0.dhcpv6-client > ff02::1:2.dhcpv6-server: dhcp6 solicit 14:31:15.802389 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 4 group record(s), length 88 14:31:17.906580 IP6 fe80::5054:ff:fe4d:9ae0.dhcpv6-client > ff02::1:2.dhcpv6-server: dhcp6 solicit I had a firewall issue which I fixed by adding the following (copied from similar IPv4 before.rules settings) to /etc/ufw/before6.rules at the end before the commit statement: # allow bridging (for KVM) -I FORWARD -m physdev --physdev-is-bridged -j ACCEPT I am running the host on a Ubuntu 14.04 server so I guess I could have used dnsmasq but I didn't find any howto for it so I used radvd (which had to be installed) with the following configuration in /etc/radvd.conf: interface br0 { AdvSendAdvert on; AdvLinkMTU 1480; prefix 2a01:79d:xxx::/64 { AdvOnLink on; AdvAutonomous on; }; }; This didn't help though so I guess I must have configured it wrong? Any help appreciated. Br, Arne PS: I wish the Ubuntu documentation included how to configure virtualization to work with IPv6

  Read the article

• Internet is not working in base machine

  - by surendar

  I have a Ubuntu desktop. I am running a virtual windows machine using virtual box. Few days before Internet is not working in Ubuntu but it is working in the virtual machine. Even the samba shares are also accessible. I don't know why internet is not working in the base machine. I have tried to ping google.com, but it returns Ubuntu@desktop:~$ ping google.com ping: unknown host google.com ifconfig command's output Ubuntu@desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:27:0e:1b:86:2a inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::227:eff:fe1b:862a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38221 errors:0 dropped:0 overruns:0 frame:0 TX packets:28161 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39144616 (39.1 MB) TX bytes:6143919 (6.1 MB) Interrupt:27 Base address:0x2000 eth0:0 Link encap:Ethernet HWaddr 00:27:0e:1b:86:2a inet addr:192.168.2.7 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:27 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14944 errors:0 dropped:0 overruns:0 frame:0 TX packets:14944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1735451 (1.7 MB) TX bytes:1735451 (1.7 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:c0:00:01 inet addr:192.168.243.1 Bcast:192.168.243.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:77 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:56:c0:00:08 inet addr:172.16.162.1 Bcast:172.16.162.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:78 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

• Xubuntu: Disks utility (palimpsest) and Gparted not showing up anywhere after installation

  - by Noam Gagliardi

  So I've downloaded Gparted and Disks from the software center. According to software center, they've both installed successfully... but they're nowhere to be found. Even in my terminal: $ palimpsest palimpsest: command not found I've looked in usr/bin... no "palimpsest", no "gnome-disk-utility". In usr/share/gnome-disk-utility there's a bunch of .ui files. According to Software Center, both programs are now installed in my computer, but it seems I've no way to find them. I've tried re-installing and restarting. I'm on Xubuntu 32 bit.

  Read the article

• How to set which application is launched by xdg-open?

  - by Dima

  I have run update-alternatives as well as gnome preffered apps selection thing. And all point to have chromium browser as default. Yet when I run xdg-open http://askubuntu.com firefox is launched! Similarly emacs and bzr also launch stuff in firefox instead of chromium. Are there any additional settings which affect xdg-open functionality? Something is definatly broken: UPDATE I have purged firefox: update-alternatives - uses chromium browser sensible-browser - opens chromium browser xdg-open & gnome-open - opens using google-chrome which kindly tells me "it's not default browser" !!!!

  Read the article

• Can't complete dropbox installation from behind proxy

  - by Mark Jones

  Problem: My PC on campus sits behind a proxy (requiring authentication) and I can't setup Dropbox. I am convinced that this is a proxy issue as I can't setup Ubuntu one either (but I don't use Ubuntu One so that is not a problem). I have looked at the Ubuntu One fix but it seems to be to modify settings explicitly related to Ubuntu One. I can install the nautilus-dropbox package (compiled from source and from .deb package from website and from software centre) but once I click OK from the "Dropbox Installation" dialog box (prompting me to download the proprietary daemon) the installation just freezes with the OK button pressed. When I look at its process in System Monitor its waiting channel is inet_wait_for_connect. I have set the following proxy directives thus far: Added mj22:**@proxy.waikato.ac.nz:80 information to network proxy settings under network in settings. Added http_host and http_port variables under gconf-editor-system-proxy Added 'host', 'authentication_password' 'authentication_user' and ticked 'user authentication' and 'use_http_proxy' under gconf-editor-system-http_proxy Added export http_proxy="http://mj22:**@proxy.waikato.ac.nz:80/" to /etc/bash.bashrc Added Acquire::http::proxy "http://mj22:**@proxy.waikato.ac.nz:80/"; to /etc/apt/apt.conf (which is what I imagine is letting Software Center retrieve packages). (where ** is my password) I have also added the equivalent ftp and https lines for the above entries. I get the internet fine and Software Centre can download packages but thats it. Related issues: The software centre can't fetch reviews (but can download packages). When trying to add an online account in Gnome 3 a dialog pop up appears with "Error getting a Request Token: Cannot connect to proxy (proxy.waikato.ac.nz)" Updates: After some time (10mins ish) Dropbox shows an error dialog box that reads: Trouble connecting to Dropbox servers. Maybe your internet connection is down, or you need to set you http_proxy environment variable. Is there a way I can see what environment variables are currently set?

  Read the article

• Why can't I run Compiz?

  - by jasoncruz98

  I installed Ubuntu 11.10 on my laptop. The main reason I switched to Ubuntu is because I wanted to use Compiz. The first thing I did was to go to Additional Drivers and install ATI/AMD Proprietary FGRLX Graphics Driver. There was also another one available, ATI/AMD Proprietary FGRLX Graphics Driver (post-release updates), but I didn't install that one, because it basically meant the same thing to me as the one I already installed. Next, I went to the ubuntuguide.org Oneiric Wiki http://ubuntuguide.org/wiki/Ubuntu:Oneiric#Compiz_Fusion So I followed the instructions there and ran this command in terminal: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra emerald librsvg2-common But then, the terminal window said that the package "emerald" could not be found. So, I ran this command instead: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra After that, I installed Fusion Icon by running this command: sudo apt-get install fusion-icon I restarted my computer, searched for Compiz Config Settings Manager, and clicked on it. Then, I activated Wobbly Windows. I logged off and logged back on again, but there was no wobbly windows effect. So I tried clicking on Fusion Icon, but it never started. Can someone please tell me what I did wrong here? Because I see everyone seems to be able to run Compiz except me. I really need to start Compiz, or else I think I'm going to uninstall Ubuntu.

  Read the article

• How to install Ubiquity into a Live CD installation image?

  - by Patrick L

  I am trying a create a small Ubuntu installation ISO image. I am using a tool called Ubuntu-Builder. To make the final ISO as small as possible, I have decided to use Ubuntu Mini Remix. It is a small Live CD without GUI. It does not come with any installer software like Ubiquity. I want to embed an installer software into the ISO image so that user can install it into harddisk. In Ubuntu-Builder, I have tried the following: Install LXDE Desktop, then install Ubiquity. But the final ISO boots into command line. Install OpenBox Desktop, then install Ubiquity. But the final ISO boots into command line. Do not install DE, directly install Ubiquity. But the final ISO still boots into command line. After booting up from ISO, I have checked the software in the OS. It seems that Ubiquity has been installed. But it didn't show up when I boot the ISO image. Anyone knows how to install Ubiquity into a Live CD ISO image? Anyone knows any text mode installer which can replace Ubiquity?

  Read the article

< Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >