Search Results

Search found 52872 results on 2115 pages for 'does the htmleditor control raise any client side events'.

Page 514/2115 | < Previous Page | 510 511 512 513 514 515 516 517 518 519 520 521  | Next Page >

• General Availability of Oracle E-Business Suite Plug-in 12.1.0.1.0

  - by user810030

  We are pleased to announce the General Availability of Oracle E-Business Suite Plug-in 12.1.0.1.0, an integral part of Application Management Suite for Oracle E-Business Suite. The combination of Enterprise Manager 12c Cloud Control and the Application Management Suite combines functionality that was available in the standalone Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite with Oracle’s Real User Experience Insight product and the Configuration & Compliance capabilities to provide the most complete solution for managing Oracle E-Business Suite applications. The features that were available in the standalone management packs are now packaged into the Oracle E-Business Suite Plug-in, which is now fully certified with Oracle Enterprise Manager 12c Cloud Control. This latest plug-in extends Cloud Control with E-Business Suite specific system management capabilities and features enhanced change management support. This new release offers the following key enhancements: General: Oracle Enterprise Manager 12c Base Platform uptake: All components of the management suite are certified with Oracle Enterprise Manager 12c Cloud Control. Security: Privilege Delegation: The Oracle E-Business Suite Plug-in now extends Enterprise Manager’s privilege delegation through Sudo and PowerBroker to Oracle E-Business Suite Plug-in host targets.  Privileges and Roles for Managing Oracle E-Business Suite: This release includes new ready-to-use target and resource privileges to monitor, manage, and perform Change Management functionality.  Cloning: Named Credentials Uptake in Cloning: The Clone module transactions now let users leverage the Named Credential feature introduced in Enterprise Manager 12c, thereby passing all the benefits of Named Credentials features in Enterprise Manager to the Oracle E-Business Suite Plug-in users.  Smart Clone improvements: The new and improved Smart Clone UI supports the adding of "pre and post" custom steps to a copy of the ready-to-use cloning deployment procedure. Now a user can pass parameters to the custom steps through the interview screen of the UI as well as pass ready-to-use parameters to the custom steps.  Change Management Enhancements Application Management Suite for Oracle E-Business Suite provides a centralized view to monitor and orchestrate changes (both functional and technical) across multiple Oracle E-Business Suite systems. In this latest release, it provides even more control and flexibility in managing Oracle E-Business Suite changes. Customization Manager: Support for longer file names: Customization Manager now handles file names up to thirty characters in length.  Patch Manager: Queuing of Patch Manager Runs: This feature allows patch runs to queue up if Patch Manager detects a specific target is in a blackout state.  Multi-node system patching: The patch run interview has been enhanced to allow Enterprise Manager Administrator to choose which nodes adpatch will run on.  New AD Administration Options: The patch run interview has been extended to include AD Administration Options "Relink Application Programs", "Generate Product Jars Files", "Generate Report Files", and "Generate Form Files".  Release Technical Details Product documentation for the plug-in is available on My Oracle Support as note 1434392.1.  The Oracle E-Business Suite Plug-in can be accessed in one of the following ways:  Fresh install  Enterprise Manager Store  Oracle Software Delivery Cloud Upgrades  Oracle Technology Network Please refer to the Application Management Pack for Oracle E-Business Suite Guide for further details.  Related Software Component Oracle Real User Experience Insight 12.1.0.0.1  Product documentation is available on Oracle Technology Network in the "Oracle Enterprise Manager 12c Release 1 (12.1) Documentation" set under the "Associated Document" tab. (http://docs.oracle.com/cd/E26370_01/index.htm)  Product may be downloaded individually from Oracle Technology Network software download page for Oracle Enterprise Manager under "Additional Enterprise Manager Downloads." (http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html)  Product may also be downloaded individually from the Oracle Software Delivery Cloud. Select "Oracle Enterprise Manager" product pack, "Oracle Real User Experience Insight 12c Release 1 Media Pack for x8  Collateral Can be accessed on the Application Management Page on Oracle Technology Network

  Read the article

• Design pattern for logging changes in parent/child objects saved to database

  - by andrew

  I’ve got a 2 database tables in parent/child relationship as one-many. I’ve got three classes representing the data in these two tables: Parent Class { Public int ID {get; set;} .. other properties } Child Class { Public int ID {get;set;} Public int ParentID {get; set;} .. other properties } TogetherClass { Public Parent Parent; Public List<Child> ChildList; } Lastly I’ve got a client and server application – I’m in control of both ends so can make changes to both programs as I need to. Client makes a request for ParentID and receives a Together Class for the matching parent, and all of the child records. The client app may make changes to the children – add new children, remove or modify existing ones. Client app then sends the Together Class back to the server app. Server app needs to update the parent and child records in the database. In addition I would like to be able to log the changes – I’m doing this by having 2 separate tables one for Parent, one for child; each containing the same columns as the original plus date time modified, by whom and a list of the changes. I’m unsure as to the best approach to detect the changes in records – new records, records to be deleted, records with no fields changed, records with some fields changed. I figure I need to read the parent & children records and compare those to the ones in the Together Class. Strategy A: If Together class’s child record has an ID of say 0, that indicates a new record; insert. Any deleted child records are no longer in the Together Class; see if any of the comparison child records are not found in the Together class and delete if not found (Compare using ID). Check each child record for changes and if changed log. Strategy B: Make a new Updated TogetherClass UpdatedClass { Public Parent Parent {get; set} Public List<Child> ListNewChild {get;set;} Public List<Child> DeletedChild {get;set;} Public List<Child> ExistingChild {get;set;} // used for no changes and modified rows } And then process as per the list. The reason why I’m asking for ideas is that both of these solutions don’t seem optimal to me and I suspect this problem has been solved already – some kind of design pattern ? I am aware of one potential problem in this general approach – that where Client App A requests a record; App B requests same record; A then saves changes; B then saves changes which may overwrite changes A made. This is a separate locking issue which I’ll raise a separate question for if I’ve got trouble implementing. The actual implementation is c#, SQL Server and WCF between client and server - sharing a library containing the class implementations. Apologies if this is a duplicate post – I tried searching various terms without finding a match though.

  Read the article

• How to Create SharePoint List and Insert List Item programmatically from a Windows Forms Application.

  - by Michael M. Bangoy

  In this post I’m going to demonstrate how to create SharePoint List and also Insert Items on the List from a Windows Forms Application. 1. Open Visual Studio and create a new project. On the project template select Windows Form Application under C#. 2. In order to communicate with Sharepoint from a Windows Forms Application we need to add the 2 Sharepoint Client DLL located in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI.  3. Select the Microsoft.Sharepoint.Client.dll and Microsoft.Sharepoint.Client.Runtime.dll. (Your solution should look like the one below) 4. Open the Form1 in design view and from the Toolbox menu add a button on the form surface. Your form should look like the one below. 5. Double click the button to open the code view. Add Using statement to reference the Sharepoint Client Library then create method for the Create List. Your code should like the codes below. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Security; using System.Windows.Forms; using SP = Microsoft.SharePoint.Client; namespace ClientObjectModel {     public partial class Form1 : Form     {         // url of the Sharepoint site         const string _context = "urlofthesharepointsite";         public Form1()         {             InitializeComponent();         }         private void Form1_Load(object sender, EventArgs e)         {                    }         private void cmdcreate_Click(object sender, EventArgs e)         {             try             {                 // declare the ClientContext Object                 SP.ClientContext _clientcontext = new SP.ClientContext(_context);                 SP.Web _site = _clientcontext.Web;                 // declare a ListCreationInfo                 SP.ListCreationInformation _listcreationinfo = new SP.ListCreationInformation();                 // set the Title and the Template of the List to be created                 _listcreationinfo.Title = "NewListFromCOM";                 _listcreationinfo.TemplateType = (int)SP.ListTemplateType.GenericList;                 // Call the add method to the ListCreatedInfo                 SP.List _list = _site.Lists.Add(_listcreationinfo);                 // Add Description field to the List                 SP.Field _Description = _list.Fields.AddFieldAsXml(@"                                     <Field Type='Text'                                         DisplayName='Description'>                                     </Field>", true, SP.AddFieldOptions.AddToDefaultContentType);                 // declare the List item Creation object for creating List Item                 SP.ListItemCreationInformation _itemcreationinfo = new SP.ListItemCreationInformation();                 // call the additem method of the list to insert a new List Item                 SP.ListItem _item = _list.AddItem(_itemcreationinfo);                 _item["Title"] = "New Item from Client Object Model";                 _item["Description"] = "This item was added by a Windows Forms Application";                 // call the update method                 _item.Update();                 // execute the query of the clientcontext                 _clientcontext.ExecuteQuery();                 // dispose the clientcontext                 _clientcontext.Dispose();                 MessageBox.Show("List Creation Successfull");             }             catch(Exception ex)             {                 MessageBox.Show("Error creating list" + ex.ToString());             }          }     } } 6. Hit F5 to run the application. A message will be displayed on the screen if the operation is successful and also if it fails. 7. To make that the operation of our Windows Form Application has really created the List and Inserted an item on it. Let’s open our SharePoint site. Once the SharePoint is open click on the Site Actions then View All Site Content. 7. Click the List to open it and check if an Item is inserted. That’s it. Hope this helps.

  Read the article

• Friday Tips #6, Part 1

  - by Chris Kawalek

  We have a two parter this week, with this post focusing on desktop virtualization and the next one on server virtualization. Question: Why would I use the Oracle Secure Global Desktop Secure Gateway? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Well, for the benefit of those who might not be familiar with client connections in Oracle Secure Global Desktop (SGD), let me back up and briefly explain. An SGD client connects to an SGD server using two distinct protocols, which, by default, require two distinct TCP ports. The first is the HTTP protocol, used by the web browser to connect to the SGD webserver on TCP port 80, or if secure connections are enabled (SSL/TLS), then TCP port 443, commonly identified as the "HTTPS" port, that is, "SSL encrypted HTTP." The second protocol from the client to the server is the Adaptive Internet Protocol, or AIP, which is used for displaying applications, transferring drive mapping data, print jobs, and so on. By default, AIP uses the TCP port 3104, or port 5307 when SSL is enabled. When SGD clients need to access SGD over a firewall, the ports that AIP requires are typically "closed"; and most administrators are reluctant, to put it mildly, to change their firewall configurations to allow AIP traffic on 3144/5307.   To avoid this problem, SGD introduced "Firewall Forwarding", a technique where, in effect, both http and AIP traffic are "multiplexed" onto a single "well-known" TCP port, that is port 443, the https port.  This is also known as single-port firewall traversal.  This technique takes advantage of the fact that, as a "well-known service", port 443 is usually "open",   allowing (encrypted) traffic to pass. At the target SGD server, the two protocols are de-multiplexed and routed appropriately. The Secure Gateway was developed in response to requirements from customers for SGD to support multi-stage DMZ's, and to avoid exposing SGD servers and the information they contain directly to connections from the Internet. The Secure Gateway acts as a reverse-proxy in the first-tier of the DMZ, accepting, authenticating, and terminating incoming client connections, and then re-encrypting the connections, and proxying them, routing them on to SGD servers, deeper in the network. The client no longer needs to know the name/IP address of the SGD servers in their network, they connect to the gateway, only. The gateway takes care of those internal network details.     The Secure Gateway supports the same "single-port firewall" capability as does "Firewall Forwarding", but offers the additional advantage of load-balancing incoming client connections amongst SGD array members, which could be cumbersome without a forward-deployed secure gateway. Load-balancing weights and policies can be monitored and tuned using the "Balancer Manager" application, and Apache mod_proxy_balancer directives.   Going forward, our architects recommend the use of the Secure Gateway over "Firewall Forwarding" for single-port firewall traversal, due to its architectural advantages, its greater flexibility and enhanced features.  Finally, it should be noted that the Secure Gateway is not separately priced; any licensed SGD customer may use the Secure Gateway component at no additional cost.   For more information, see the "Secure Gateway Administrator's Guide".

  Read the article

• Introduction to WebCenter Personalization: &ldquo;The Conductor&rdquo;

  - by Steve Pepper

  There are some new faces in the town of WebCenter with the latest 11g PS3 release.  A new component has introduced itself as "Oracle WebCenter Personalization", a.k.a WCP, to simplify delivery of a personalized experience and content to end users.  This posting reviews one of the primary components within WCP: "The Conductor". The Conductor: This ain't just an ordinary cloud... One of the founding principals behind WebCenter Personalization was to provide an open client-side API that remains independent of the technology invoking it, in addition to independence from the architecture running it.  The Conductor delivers this, and much, much more. The Conductor is the engine behind WebCenter Personalization that allows flow-based documents, called "Scenarios", to be managed and executed on the server-side through a well published and RESTful api.      The Conductor also supports an extensible model for custom provider integration that can be easily invoked within a Scenario to promote seamless integration with existing business assets. Introducing the Scenario Conductor Scenarios are declarative offline-authored documents using the custom Personalization JDeveloper bundle included with WebCenter.  A Scenario contains one (or more) statements that can: Create variables that are scoped to the current execution context Iterate over collections, or loop until a specific condition is met Execute one or more statements when a condition is met Invoke other scenarios that exist within the same namespace Invoke a data provider that integrates with custom applications Once a variable is assigned within the Scenario's execution context, it can be referenced anywhere within the same Scenario using the common Expression Language syntax used in J2EE web containers. Scenarios are then published and tested to the Integrated WebLogic Server domain, or published remotely to other domains running WebCenter Personalization. Various Client-side Models The Conductor server API is built upon RESTful services that support a wide variety of clients able to communicate over HTTP.  The Conductor supports the following client-side models: REST:  Popular browser-based languages can be used to manage and execute Conductor Scenarios.  There are other public methods to retrieve configured provider metadata that can be used by custom applications. The Conductor currently supports XML and JSON for it's API syntax. Java: WebCenter Personalization delivers a robust and light-weight java client with the popular Jersey framework as it's foundation.  It has never been easier to write a remote java client to manage remote RESTful services. Expression Language (EL): Allow the results of Scenario execution to control your user interface or embed personalized content using the session-scoped managed bean.  The EL client can also be used in straight JSP pages with minimal configuration. Extensible Provider Framework The Conductor supports a pluggable provider framework for integrating custom code with Scenario execution.  There are two types of providers supported by the Conductor: Function Provider: Function Providers are simple java annotated classes with static methods that are meant to be served as utilities.  Some common uses would include: object creation or instantiation, data transformation, and the like.  Function Providers can be invoked using the common EL syntax from variable assignments, conditions, and loops. For example:  ${myUtilityClass:doStuff(arg1,arg2))} If you are familiar with EL Functions, Function Providers are based on the same concept. Data Provider: Like Function Providers, Data Providers are annotated java classes, but they must adhere to a much more strict object model.  Data Providers have access to a wealth of Conductor services, such as: Access to namespace-scoped configuration API that can be managed by Oracle Enterprise Manager, Scenario execution context for expression resolution, and more.  Oracle ships with three out-of-the-box data providers that supports integration with: Standardized Content Servers(CMIS),  Federated Profile Properties through the Properties Service, and WebCenter Activity Graph. Useful References If you are looking to immediately get started writing your own application using WebCenter Personalization Services, you will find the following references helpful in getting you on your way: Personalizing WebCenter Applications Authoring Personalized Scenarios in JDeveloper Using Personalization APIs Externally Implementing and Calling Function Providers Implementing and Calling Data Providers

  Read the article

• Why is x=x++ undefined?

  - by ugoren

  It's undefined because the it modifies x twice between sequence points. The standard says it's undefined, therefore it's undefined. That much I know. But why? My understanding is that forbidding this allows compilers to optimize better. This could have made sense when C was invented, but now seems like a weak argument. If we were to reinvent C today, would we do it this way, or can it be done better? Or maybe there's a deeper problem, that makes it hard to define consistent rules for such expressions, so it's best to forbid them? So suppose we were to reinvent C today. I'd like to suggest simple rules for expressions such as x=x++, which seem to me to work better than the existing rules. I'd like to get your opinion on the suggested rules compared to the existing ones, or other suggestions. Suggested Rules: Between sequence points, order of evaluation is unspecified. Side effects take place immediately. There's no undefined behavior involved. Expressions evaluate to this value or that, but surely won't format your hard disk (strangely, I've never seen an implementation where x=x++ formats the hard disk). Example Expressions x=x++ - Well defined, doesn't change x. First, x is incremented (immediately when x++ is evaluated), then it's old value is stored in x. x++ + ++x - Increments x twice, evaluates to 2*x+2. Though either side may be evaluated first, the result is either x + (x+2) (left side first) or (x+1) + (x+1) (right side first). x = x + (x=3) - Unspecified, x set to either x+3 or 6. If the right side is evaluated first, it's x+3. It's also possible that x=3 is evaluated first, so it's 3+3. In either case, the x=3 assignment happens immediately when x=3 is evaluated, so the value stored is overwritten by the other assignment. x+=(x=3) - Well defined, sets x to 6. You could argue that this is just shorthand for the expression above. But I'd say that += must be executed after x=3, and not in two parts (read x, evaluate x=3, add and store new value). What's the Advantage? Some comments raised this good point. It's not that I'm after the pleasure of using x=x++ in my code. It's a strange and misleading expression. What I want is to be able to understand complicated expressions. Normally, a complicated expression is no more than the sum of its parts. If you understand the parts and the operators combining them, you can understand the whole. C's current behavior seems to deviate from this principle. One assignment plus another assignment suddenly doesn't make two assignments. Today, when I look at x=x++, I can't say what it does. With my suggested rules, I can, by simply examining its components and their relations.

  Read the article

• How can I work efficiently on a desktop sharing workflow?

  - by OSdave

  I am a freelance Magento developer, based in Spain. One of my clients is a Germany based web development company and they're asking me something I think it's impossible. OK, maybe not impossible but definitely not a preferred way of doing things. One of their clients has a Magento Entreprise installation, which is the paid (and I think proprietary) version of Magento. Their client has forbidden them to download the files from his server. My client is asking me now to study one particular module of the application in order to interact with it from a custom module I'll have to develop. As they have a read-only ssh access to their client's server, they came up with this solution: Set up a desktop/screen sharing session between one of their developer's station and mine, alongsides with a skype conversation. Their idea is that I'll say to the developer: show me file foo.php The developer will then open this foo.php file in his IDE. I'll have then to ask him to show me the bar method, the parent class, etc... Remember that it's a read-only session, so forget about putting a Zend_Debug::log() anywhere, and don't even think about a xDebug breakpoint (they don't use any kind of debugger, sic). Their client has also forbidden them to use any version control system... My first reaction when they explained to me this was (and I actually did say it outloud to them): Well, find another client. but they took it as a joke from me. I understand that in a business point of view rejecting a client is not a good practice, but I think that the condition of this assignment make it impossible to complete. At least according to my workflow. I mean, the way I work or learn a new framework/program is: download all files and copy of db on my pc create a git repository and a branch run the application locally use breakpoints use Zend_Debug::log() write the code and tests commit to git repo upload to (test/staging first if there is one, production if not) server I have agreed to try the desktop sharing session, although I think it will be a waste of time. On one hand I don't mind, they pay me for that time, but I know me and I don't like the sensation of loosing my time. On the other hand, I have other clients for whom I can work according to my workflow. I am about to say to them that I cannot (don't want to) do it. Well, I'll first try this desktop sharing session: maybe I'm wrong and it can actually work. But I like to consider myself as a professional, and I know that I don't know everything. So I try to keep an open mind and I am always willing to learn new stuff. So my questions are: Can this desktop-sharing workflow work? What should be done in order to take the most of it? Taking into account all the obstacles (geographic locations, no local, no git), is there another way for me to work on that project?

  Read the article

• Is the Leptonica implementation of 'Modified Median Cut' not using the median at all?

  - by TheCodeJunkie

  I'm playing around a bit with image processing and decided to read up on how color quantization worked and after a bit of reading I found the Modified Median Cut Quantization algorithm. I've been reading the code of the C implementation in Leptonica library and came across something I thought was a bit odd. Now I want to stress that I am far from an expert in this area, not am I a math-head, so I am predicting that this all comes down to me not understanding all of it and not that the implementation of the algorithm is wrong at all. The algorithm states that the vbox should be split along the lagest axis and that it should be split using the following logic The largest axis is divided by locating the bin with the median pixel (by population), selecting the longer side, and dividing in the center of that side. We could have simply put the bin with the median pixel in the shorter side, but in the early stages of subdivision, this tends to put low density clusters (that are not considered in the subdivision) in the same vbox as part of a high density cluster that will outvote it in median vbox color, even with future median-based subdivisions. The algorithm used here is particularly important in early subdivisions, and 3is useful for giving visible but low population color clusters their own vbox. This has little effect on the subdivision of high density clusters, which ultimately will have roughly equal population in their vboxes. For the sake of the argument, let's assume that we have a vbox that we are in the process of splitting and that the red axis is the largest. In the Leptonica algorithm, on line 01297, the code appears to do the following Iterate over all the possible green and blue variations of the red color For each iteration it adds to the total number of pixels (population) it's found along the red axis For each red color it sum up the population of the current red and the previous ones, thus storing an accumulated value, for each red note: when I say 'red' I mean each point along the axis that is covered by the iteration, the actual color may not be red but contains a certain amount of red So for the sake of illustration, assume we have 9 "bins" along the red axis and that they have the following populations 4 8 20 16 1 9 12 8 8 After the iteration of all red bins, the partialsum array will contain the following count for the bins mentioned above 4 12 32 48 49 58 70 78 86 And total would have a value of 86 Once that's done it's time to perform the actual median cut and for the red axis this is performed on line 01346 It iterates over bins and check they accumulated sum. And here's the part that throws me of from the description of the algorithm. It looks for the first bin that has a value that is greater than total/2 Wouldn't total/2 mean that it is looking for a bin that has a value that is greater than the average value and not the median ? The median for the above bins would be 49 The use of 43 or 49 could potentially have a huge impact on how the boxes are split, even though the algorithm then proceeds by moving to the center of the larger side of where the matched value was.. Another thing that puzzles me a bit is that the paper specified that the bin with the median value should be located, but does not mention how to proceed if there are an even number of bins.. the median would be the result of (a+b)/2 and it's not guaranteed that any of the bins contains that population count. So this is what makes me thing that there are some approximations going on that are negligible because of how the split actually takes part at the center of the larger side of the selected bin. Sorry if it got a bit long winded, but I wanted to be as thoroughas I could because it's been driving me nuts for a couple of days now ;)

  Read the article

• Programmatically creating scrollview(s) from custom component in android

  - by jaapbeetstra

  I'm trying to build a compound control in Android, containing (among other things) a ScrollView. Things go wrong when I try to view the control in Eclipse, crashing with a NullPointerException after the error message: "Parser is not a BridgeXmlBlockParser". Stacktrace: java.lang.NullPointerException at android.view.View.<init>(View.java:1720) at android.view.ViewGroup.<init>(ViewGroup.java:277) at android.widget.FrameLayout.<init>(FrameLayout.java:83) at android.widget.ScrollView.<init>(ScrollView.java:128) at android.widget.ScrollView.<init>(ScrollView.java:124) at android.widget.ScrollView.<init>(ScrollView.java:120) at my.compound.control.StringPicker.onMeasure(StringPicker.java:46) ... I've traced the error to the following conditions: The NPE is thrown because a Context.obtainStyledAttributes() call returns null when the attrs argument passed is null. This only applies to the BridgeContext implementation used in Eclipse, which expects attrs to be an instance of the BridgeXmlBlockParser. The attrs argument is null because I create the ScrollView using the (Context) constructor. There is a workaround of course, which is passing the attrs I receive when Eclipse constructs the compound control, but I don't want all the attributes set on the compound control to apply to my inner control. Am I doing something wrong, is this a bug in Android Eclipse, ...?

  Read the article

• Windows 7 64 / Visual Studio 2008 / OpenCV2.1 error: "The application was unable to start correctly

  - by James

  Hey all, I'm building OpenCV2.1 from top of branch in 64 bit mode, when I link the libraries against my code (that works in 32 bit mode on XP), I get the dialog: "The application was unable to start correctly (0xc0150002) Click OK to close the application" When I start the application. The event viewer is pointing at one of the OpenCV dll's & says it's a Side-by-Side error, but I'm definitely building OpenCV & my code as a 64 bit compile, and there are no errors during that process. I've tried fiddling with the /MTd options & it doesn't help. Some (almost) related questions have suggested installing the VS2008 redistributable package, but I'm building using vs2008 pro, that seems like madness? Is it still necessary to install the package in my case? Any help, including the cause of these side-by-side errors, would be appreciated. James

  Read the article

• RSA decrypting data in C# (.NET 3.5) which was encrypted with openssl in php 5.3.2

  - by panny

  Maybe someone can clear me up. I have been surfing on this a while now. Step #1: Create a root certificate Key generation on unix 1) openssl req -x509 -nodes -days 3650 -newkey rsa:1024 -keyout privatekey.pem -out mycert.pem 2) openssl rsa -in privatekey.pem -pubout -out publickey.pem 3) openssl pkcs12 -export -out mycertprivatekey.pfx -in mycert.pem -inkey privatekey.pem -name "my certificate" Step #2: Does root certificate work on php: YES PHP side I used the publickey.pem to read it into php: $publicKey = "file://C:/publickey.pem"; $privateKey = "file://C:/privatekey.pem"; $plaintext = "123"; openssl_public_encrypt($plaintext, $encrypted, $publicKey); $transfer = base64_encode($encrypted); openssl_private_decrypt($encrypted, $decrypted, $privateKey); echo $decrypted; // "123" OR $server_public_key = openssl_pkey_get_public(file_get_contents("C:\publickey.pem")); // rsa encrypt openssl_public_encrypt("123", $encrypted, $server_public_key); and the privatekey.pem to check if it works: openssl_private_decrypt($encrypted, $decrypted, openssl_get_privatekey(file_get_contents("C:\privatekey.pem"))); echo $decrypted; // "123" Coming to the conclusion, that encryption/decryption works fine on the php side with these openssl root certificate files. Step #3: Does root certificate work on .NET: YES C# side In same manner I read the keys into a .net C# console program: X509Certificate2 myCert2 = new X509Certificate2(); RSACryptoServiceProvider rsa = new RSACryptoServiceProvider(); try { myCert2 = new X509Certificate2(@"C:\mycertprivatekey.pfx"); rsa = (RSACryptoServiceProvider)myCert2.PrivateKey; } catch (Exception e) { } byte[] test = {Convert.ToByte("123")}; string t = Convert.ToString(rsa.Decrypt(rsa.Encrypt(test, false), false)); Coming to the point, that encryption/decryption works fine on the c# side with these openssl root certificate files. Step #4: Enrypt in php and Decrypt in .NET: !!NO!! PHP side $onett = "123" .... openssl_public_encrypt($onett, $encrypted, $server_public_key); $onettbase64 = base64_encode($encrypted); copy - paste $onettbase64 ("LkU2GOCy4lqwY4vtPI1JcsxgDgS2t05E6kYghuXjrQe7hSsYXETGdlhzEBlp+qhxzTXV3pw+AS5bEg9CPxqHus8fXHOnXYqsd2HL20QSaz+FjZee6Kvva0cGhWkFdWL+ANDSOWRWo/OMhm7JVqU3P/44c3dLA1eu2UsoDI26OMw=") into c# program: C# side byte[] transfered_onettbase64 = Convert.FromBase64String("LkU2GOCy4lqwY4vtPI1JcsxgDgS2t05E6kYghuXjrQe7hSsYXETGdlhzEBlp+qhxzTXV3pw+AS5bEg9CPxqHus8fXHOnXYqsd2HL20QSaz+FjZee6Kvva0cGhWkFdWL+ANDSOWRWo/OMhm7JVqU3P/44c3dLA1eu2UsoDI26OMw="); string k = Convert.ToString(rsa.Decrypt(transfered_onettbase64, false)); // Bad Data exception == Exception while decrypting!!! Any ideas?

  Read the article

• How's ActionScript 3.0 supported on symbian,android,iphone and windowCE?

  - by user198729

  Anyone knows? To deal with all the things you can do with FMS3, you have two additional language Application Program Interfaces (APIs). Both APIs are extensions of ActionScript and are called Client-Side Media ActionScript and Server-Side Media ActionScript, or in this book, simply as CS ActionScript and SS ActionScript. With ActionScript 3.0, which is also used in this book, the client-side ActionScript has been fully integrated into the language.

  Read the article

• How to build google breakpad

  - by Steve

  Hi, I'm totally lost on how to build Google's breakpad. There is a sln file, but it depends on a library that doesn't seem to have an associated sln. It seems to use something called gyp that I haven't figured out how to get working. I tried python gyp ..\breakpad\src\client\windows\breakpad_client.gyp and that just gives the following errors Traceback (most recent call last): File "gyp", line 18, in <module> sys.exit(gyp.main(sys.argv[1:])) File "pylib\gyp\__init__.py", line 445, in main options.circular_check) File "pylib\gyp\__init__.py", line 84, in Load depth, generator_input_info, check, circular_check) File "pylib\gyp\input.py", line 2165, in Load VerifyNoGYPFileCircularDependencies(targets) File "pylib\gyp\input.py", line 1429, in VerifyNoGYPFileCircularDependencies ' '.join(bad_files) gyp.input.CircularException: Some files not reachable, cycle in .gyp file dependency graph detected involving some or all of: ..\breakpad\src\client\windows\sender\crash_report_sender.gyp ..\breakpad\src\client\windows\h andler\exception_handler.gyp ..\breakpad\src\client\windows\breakpad_client.gyp ..\breakpad\src\client\windows\unittests\client_tests.gyp ..\breakpad\src\client\windows\crash_generation\crash_generation.gyp Which I can't make any sense out of. I also can't seem to find any documentation. Any help would be appreciated.

  Read the article

• Joomla Admin module in "New Article" form?

  - by Honus Wagner

  In Joomla 1.5, I am interested in developing a fairly simple module that I was hoping would live on the right side of the create new article page. I've created a handful of modules before, one on the admin page at the dashboard that is on the right side that you click to expand/collapse. So, can I create a module that I could attach to any new article form on the right side, somewhere under "advanced settings" or something? Thanks.

  Read the article

• popView from UITabBarController inside UINavigationController

  - by Manu

  Hi, I'm building an application based on the Utility template from Xcode, to which I have added some more views. My application structure would be as follows: MainView (the app menu) Flip-side view (a calculator) UINavigationController Settings view viewDiDLoad: UITabBarController - Tab1 view (options) - Tab2 view (information text) I can navigate correctly from my MainView to my Flip-side view, which is also the root view of the Navigation Controller. From my Flip-side view, I push a second view of my Navigation Controller (Settings view) that is configured to show an UITabBarController, with two tabs, as soon as it loads (with viewDidLoad). If I remove the UITabBarController, I can return with no problems to my Flip-side view using "popViewController" from my Settings view. The problem comes if I load the UITabBarController in viewDiDLoad in my Settings view... the tabs work perfectly, but I'm not able to return to my Flip-side view (root view of the Navigation Controller) anymore. I CAN return if I use the Navigation Bar of the Navigation Controller, but I want to configure my own buttons and have the Navigation Bar hidden. So far I've tried the following methods: [self.navigationController popViewControllerAnimated:YES]; [self.navigationController popToRootViewControllerAnimated:YES]; [self.navigationController popToViewController:FlipSideViewController animated:YES]; But they don't seem to work. The first two just do nothing (the screen remains as it was), and the third one does not recognize the "FlipsideViewController" (maybe because it's a delegate of the MainViewController?). Is there a way to check what is exactly doing the "back" button of the Navigation Bar if I activate it? Should I be using delegates? Can I call a popViewController method in my Settings view from any of the two Tab views? This is my Flip-side view: - (IBAction)showSettingsView { SettingsViewController *controller = [[SettingsViewController alloc] initWithNibName:@"SettingsView" bundle:nil]; controller.title = @"Settings"; [self.navigationController pushViewController:controller animated:YES]; [controller release]; } This is my Settings view: - (void)viewDidLoad { [super viewDidLoad]; tabBarController = [[UITabBarController alloc] init]; Tab1ViewController* vc1 = [[Tab1ViewController alloc] init]; Tab2ViewController* vc2 = [[Tab2ViewController alloc] init]; NSArray* controllers = [NSArray arrayWithObjects:vc1, vc2, nil]; tabBarController.viewControllers = controllers; [self.view addSubview:tabBarController.view]; } And the method to return in one of the Tab views: - (IBAction)backFromTab1View { [self.navigationController popToViewController:FlipSideViewController animated:YES]; } Thanks very much and sorry if the question is too basic!

  Read the article

• Silverlight and Encryption, how to store/generate they key/iv pair?

  - by cmaduro

  I have a Silverlight app that connects to a php webservice. I want to encrypt the communication between the webservice and the Silverlight client. I'm not relying on SSL. I'm encrypting/decrypting the POST string myself using AES 256bit Key and IV. The big questions then are: How do I generate a random unique key/iv pair in PHP. How do I share this key/iv pair between the web service and silverlight client in a secure way. It seems impossible without having some kind of hard coded key or iv on the client. Which would compromise security. This is a public website, there are no logins. Just the requirement of secure communication. I can hard code the seed for the key/iv (which is hashed with SHA256 with a time stamp salt and then assigned as the key or iv) in PHP source code, that's on the server so that is pretty safe. However on the client the seed for the key/iv pair would be visible, if it is hard coded. Further more using a time stamp as the basis for uniqueness/randomness is definitely not ok, since timestamps are predictable. It does however provide a common factor between the C# code and the PHP code. The only other option that I can think of would be to have a 3rd service involved that provides the key/iv to the Silverlight client, as well as the php webservice. This of course start the cycle anew, with the question of how to store the credentials for accessing the key/iv distribution service on the Silverlight client. Sounds like the solution is then asymmetric encryption, since sensitive data will be viewed only on the administrative back end of the website. Unfortunately Silverlight has no asymmetric encryption classes. The solution? Roll my own Diffie-Hellman key exchange! Plug that key into AES256!

  Read the article

• .Net/C# - Pros and cons using the GAC

  - by Adi barad

  Hi Guys, I would like to hear your opinion regarding the benefits of disadvantages of using the GAC in .Net applications. To me, it looks more professional to sign & register the application dlls in the GAC. It's more secure, helps with backward compatibility, side by side installations and easy to reference for end-users. But I want to hear the other side as well. Thank you very much, Adi Barda

  Read the article

• Matplotlib pick event order for overlapping artists

  - by Ajean

  I'm hitting a very strange issue with matplotlib pick events. I have two artists that are both pickable and are non-overlapping to begin with ("holes" and "pegs"). When I pick one of them, during the event handling I move the other one to where I just clicked (moving a "peg" into the "hole"). Then, without doing anything else, a pick event from the moved artist (the peg) is generated even though it wasn't there when the first event was generated. My only explanation for it is that somehow the event manager is still moving through artist layers when the event is processed, and therefore hits the second artist after it is moved under the cursor. So then my question is - how do pick events (or any events for that matter) iterate through overlapping artists on the canvas, and is there a way to control it? I think I would get my desired behavior if it moved from the top down always (rather than bottom up or randomly). I haven't been able to find sufficient enough documentation, and a lengthy search on SO has not revealed this exact issue. Below is a working example that illustrates the problem, with PathCollections from scatter as pegs and holes: import matplotlib.pyplot as plt import sys class peg_tester(): def __init__(self): self.fig = plt.figure(figsize=(3,1)) self.ax = self.fig.add_axes([0,0,1,1]) self.ax.set_xlim([-0.5,2.5]) self.ax.set_ylim([-0.25,0.25]) self.ax.text(-0.4, 0.15, 'One click on the hole, and I get 2 events not 1', fontsize=8) self.holes = self.ax.scatter([1], [0], color='black', picker=0) self.pegs = self.ax.scatter([0], [0], s=100, facecolor='#dd8800', edgecolor='black', picker=0) self.fig.canvas.mpl_connect('pick_event', self.handler) plt.show() def handler(self, event): if event.artist is self.holes: # If I get a hole event, then move a peg (to that hole) ... # but then I get a peg event also with no extra clicks! offs = self.pegs.get_offsets() offs[0,:] = [1,0] # Moves left peg to the middle self.pegs.set_offsets(offs) self.fig.canvas.draw() print 'picked a hole, moving left peg to center' elif event.artist is self.pegs: print 'picked a peg' sys.stdout.flush() # Necessary when in ipython qtconsole if __name__ == "__main__": pt = peg_tester() I have tried setting the zorder to make the pegs always above the holes, but that doesn't change how the pick events are generated, and particularly this funny phantom event.

  Read the article

• Drupal 6: Drupal Themer gives same candidate name for different type of content types

  - by artmania

  Hi friends, I'm a drupal newbie... I have different type of contents like News, Events, etc. and their content is different. News detail page has title-content text-date. but Events detail page has title-date-content text-location-speaker-etc. So I need different layout page for these different types. So, I enabled Drupal Themer to get a candidate name. for events page, it gave me page-node.tpl.php and it gives same for News page as well :( how can I separate these pages? I expected sth like page-event-node.tpl , but no... :/ Drupal Themer also give unique candidate name for event page like page-node-18.tpl.php but it doesnt mean anything since I can not create a general layout for all events by this node name. :( Appreciate helps so much!! Thanks a lot!!!

  Read the article

• UISplitView: how to access instance?

  - by chpwn

  I have a navigation controller in my left portion of my split view, and in the right portion. But sometimes, for example when an item is tapped, my left side must manually set the view controller on the right side. Where is the best place to store the split view controller instance? Pass it around to each view controller on the left side, like I do with the navigation controller? Store it in my App Delegate and then access it via a property with [[UIApplication sharedApplication] delegate].splitView?

  Read the article

• GWT Internationalization throws an exception while rebinding

  - by Stephane Grenier

  I'm trying to internationalize a test application with GWT following the instruction and I have: com.example.client.MyConstants.java com.example.client.MyConstants_en.properties com.example.client.MyConstants_fr.properties com.example.client.MyAppEntryPoint.java In this code I have: public interface MyConstants extends Constants { @DefaultStringValue("HelloWorld") String hellowWorld(); } And public class MyAppEntryPoint implements EntryPoint { public void onModuleLoad() { MyConstants constants = GWT.create(MyConstants.class); VerticalPanel mainPanel = new VerticalPanel(); mainPanel.add(new Label(constants.hellowWorld())); RootPanel.get("myContainer").add(mainPanel); } } For MyApp.gwt.xml I have: <module rename-to="myModule"> <inherits name="com.google.gwt.xml.XML" /> <inherits name="com.google.gwt.i18n.I18N"/> <inherits name='com.google.gwt.user.theme.standard.Standard'/> <!-- Specify the app entry point class. --> <entry-point class='com.example.client.MyAppEntryPoint'/> <extend-property name="locale" values="en,fr"/> </module> In the html I have: ... It all seems to work as long as I don't include in the xml file. As soon as I do, I get the following exception: [ERROR] Generator 'com.google.gwt.i18n.rebind.LocalizableGenerator' threw threw an exception while rebinding 'com.example.client.myConstants' java.lang.NullPointerException: null ... Any help would be greatly appreciated on why it's throwing the exception. -

  Read the article

• DataGridView not displaying data in ToolStripDropDown

  - by jblaske

  I'm utilizing the code posted by Jesper Palm here: http://stackoverflow.com/questions/280891/make-user-control-display-outside-of-form-boundry /// <summary> /// A simple popup window that can host any System.Windows.Forms.Control /// </summary> public class PopupWindow : System.Windows.Forms.ToolStripDropDown { private System.Windows.Forms.Control _content; private System.Windows.Forms.ToolStripControlHost _host; public PopupWindow(System.Windows.Forms.Control content) { //Basic setup... this.AutoSize = false; this.DoubleBuffered = true; this.ResizeRedraw = true; this._content = content; this._host = new System.Windows.Forms.ToolStripControlHost(content); //Positioning and Sizing this.MinimumSize = content.MinimumSize; this.MaximumSize = content.Size; this.Size = content.Size; content.Location = Point.Empty; //Add the host to the list this.Items.Add(this._host); } } I've translated it to VB: Public Class PopupWindow Inherits System.Windows.Forms.ToolStripDropDown Private _content As System.Windows.Forms.Control Private _host As System.Windows.Forms.ToolStripControlHost Public Sub New(ByVal content As System.Windows.Forms.Control) Me.AutoSize = False Me.DoubleBuffered = True Me.ResizeRedraw = True Me._content = content Me._host = New System.Windows.Forms.ToolStripControlHost(content) Me.MinimumSize = content.MinimumSize Me.MaximumSize = content.MaximumSize Me.Size = content.Size content.Location = Point.Empty Me.Items.Add(Me._host) End Sub End Class It works great with a PictureBox showing its information. But for some reason I cannot get the DataGridView to display anything when it is in the popup. If I pull the grid out of the popup it displays all of its information fine. If I pause during debug, the grid shows that it has all the data in it. It's just not displaying anything. Does anybody have any ideas?

  Read the article

• ASP.NET file transfer from local machine to another machine

  - by Imcl

  I basically want to transfer a file from the client to the file storage server without actual login to the server so that the client cannot access the storage location on the server directly. I can do this only if i manually login to the storage server through windows login. I dont want to do that. This is a Web-Based Application. Using the link below, I wrote a code for my application. I am not able to get it right though, Please refer the link and help me ot with it... http://stackoverflow.com/questions/263518/c-uploading-files-to-file-server The following is my code:- protected void Button1_Click(object sender, EventArgs e) { filePath = FileUpload1.FileName; try { WebClient client = new WebClient(); NetworkCredential nc = new NetworkCredential(uName, password); Uri addy = new Uri("\\\\192.168.1.3\\upload\\"); client.Credentials = nc; byte[] arrReturn = client.UploadFile(addy, filePath); Console.WriteLine(arrReturn.ToString()); } catch (Exception ex) { Console.WriteLine(ex.Message); } } The following line doesn't execute... byte[] arrReturn = client.UploadFile(addy, filePath); This is the error I get: An exception occurred during a WebClient request

  Read the article

• Problem with Json Date format when calling cross-domain proxy

  - by Christo Fur

  I am using a proxy service to allow my client side javascript to talk to a service on another domain The proxy is a simple ashx file with simply gets the request and forwards it onto the service on the other domain : using (var sr = new System.IO.StreamReader(context.Request.InputStream)) { requestData = sr.ReadToEnd(); } string data = HttpUtility.UrlDecode(requestData); using (var client = new WebClient()) { client.BaseAddress = serviceUrl; client.Headers.Add("Content-Type", "application/json"); response = client.UploadString(new Uri(webserviceUrl), data); } The client javascript calling this proxy looks like this function TestMethod() { $.ajax({ type: "POST", url: "/custommodules/configuratorproxyservice.ashx?m=TestMethod", contentType: "application/json; charset=utf-8", data: JSON.parse('{"testObj":{"Name":"jo","Ref":"jones","LastModified":"\/Date(-62135596800000+0000)\/"}}'), dataType: "json", success: AjaxSucceeded, error: AjaxFailed }); function AjaxSucceeded(result) { alert(result); } function AjaxFailed(result) { alert(result.status + ' - ' + result.statusText); } } This works fine until I have to pass a date. At which point I get a Bad Request error when the proxy tries to call the service I did have this working at one point but have now lost it. Have tried using JSON.Parse on the object before sending. and JSON.Stringify, but no joy anyone got any ideas what I am missing

  Read the article

• AutoMapper a viable alternative to two way databinding using a FormView?

  - by tbone

  I've started using the FormView control to enable two way databinding in asp.net webforms. I liked that it saved me the trouble of writing loadForm and unloadForm routines on every page. So it seemed to work nicely at the start when I was just using textboxes everywhere....but when it came time to start converting some to DropDownLists, all hell broke lose. For example, see: http://stackoverflow.com/questions/2435185/not-possible-to-load-dropdownlist-on-formview-from-code-behind ....and I had many additional problems after that. So I happened upon an article on AutoMapper, which I know very little about yet, but from the sounds of it, this might be a viable alternative to two-way databinding a form to an domain entity object? From what I understand, AutoMapper basically operates on naming convention, so, it will look for matched names properties(?) on the source and destination objects. So, basically, I have all my domain entities (ie: Person) with properties (FirstName, LastName, Address, etc)....what I would like to be able to do is declare my asp controls with those exact same names, and have automapper do the loading and unloading. One obvious caveat is that AutoMapper would have to know the proper property name for each control type, ie: Person.FirstName -- form.FirstName*.Text* Person.Country -- form.Country.SelectedValue Person.IsVerified -- form.IsVerified.Checked ....so it would have to have the smarts to find the control on the form, determine its type, and then load/unload between the domain object and the webform control into the proper property of the control. So if this worked, a person could just get rid of the cursed FormView control entirely, and it would be just one line of code each for binding and unbinding a webform. Possible?

  Read the article

< Previous Page | 510 511 512 513 514 515 516 517 518 519 520 521  | Next Page >