Search Results

Search found 19533 results on 782 pages for 'machine specifications'.

Page 514/782 | < Previous Page | 510 511 512 513 514 515 516 517 518 519 520 521  | Next Page >

  • Sound not working after installing PCI video card and then removing it

    - by bakhshu
    I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

    Read the article

  • Install multiple PHP environments on OS X Snow Leopard

    - by Darren Newton
    I just upgraded my MBP to Snow Leopard (OS X 10.6), which took PHP to 5.3 This is great, except I use my MBP as my development machine and I use a lot of PHP libs and frameworks (namely CakePHP 1.2) which are not compatible at the moment with PHP 5.3. CakePHP in particular does not have a stable version for PHP 5.3 so its not a matter of upgrading the framework (and the production servers are under PHP 5.2 anyway.) Is there a way to install PHP 5.2.9 alongside PHP 5.3 and then using httpd.conf or .htaccess tell Apache which version of PHP to use for a particular directory? Alternatively is there a way to do this with MacPorts? Thanks!

    Read the article

  • Serverlocation moved and how can I Move the files

    - by Bernhard
    Hello together, I´ve a big problem. I have to move data from an old Webspace which is only accessibla by ftp. No we have a new root server which is accessible by ssh of course :-) No i Need to move all data from the old space but there is a lot of Gb of files. Is there a way to fetch all files directly from the old ftp to the storage and not over a third station (my local machine)? I´ve tried it with ftp but without success. I think I´ve used the wrong commands. Is there a way to etablish something like this including all files and directorys? Thank you in advance Bernhard

    Read the article

  • How do you debug why Windows is slow?

    - by aaron
    I've got Vista Biz and when my machine chugs I think it is because of paging, but I never know how to verify this. Procexp doesn't seem to provide useful information because it appears that nothing is going on when the chugs happen. perfmon seems like it has the counters I need, but I'm never sure what counters I should add to cover the information I want. For perfmon, I prefer numbers that are percents, so I can gauge load. Here are the counters I have up, but they don't always seem to correlate to chugs: - % disk time (logical) - page faults/sec (an indicator of lots of paging activity) - processor/%priviliged time

    Read the article

  • Difficulty racking HP ProLiant Gen8 servers

    - by Systemspoet
    We're an all Proliant shop with around 50 servers, mostly DL360s and DL380, from G5's through G7's. We just got our first two G8's in and went to rack them. We were stunned to find out that the new cable management arms protrude almost 1 inch deeper into the rack then previous iterations of the Proliant line. Unfortunately that causes them to occupy the same space as the PDU's in our APC racks. In a non-densely populated section of rack that's no biggie, but in a densely populated section it's impossible to get the cable arm into place without dislodging another machine's power. Has anyone else run into this? Obviously racking machines without cable management arms is not an option. I supposed we could reconfigure our racks but that's a nightmare.

    Read the article

  • OS2/Warp - Remotely Stop and Restart a Program

    - by Justin S
    Our current phone system runs off of a legacy OS2/Warp box. Periodically we have to log into the machine and restart OS2RSD.exe and then start it again and the phone system starts working again. The problem is we have to physically get in front of the box and use the GUI to stop and restart the process. Is it possibly to remotely run a script to kill OS2RSD.exe if its running and then start it again? I have been unable to figure this out on my own. The OS is OS2/Warp Version 3 if that helps.

    Read the article

  • How to run multiple distros using lvm

    - by Mark
    I've seen quite a few posts around about running multiple distros but not sure they apply to using LVM (and without Windows). I'm using a machine that's about 3 years old. Setup: Intel Core i7 2.8GHz 8GB Ram 1TB SATA HDD At this point, I'd like to install 12.10 and Mint 14, leaving the option open to install additional distros down the road. I could be way off, but I'm thinking about creating at least 2 primary /boot partitions (1 for 12.10 and 1 for Mint) and another partition for LVM leaving room for additional /boot partitions. Then creating a VG and separate LVs for Ubuntu 12.10 and Linux Mint 14. I understand I can share partitions between the 2 installs, but I'm only using this for testing and I have tons of space to play with. LVM seemed logical considering I may want to install and test additional distros. I guess I could share the /swap partition across the board without problems, right? I'm unclear about GRUB2. How do I handle the bootloader situation? Install 12.10 and get it running then make changes to grub.cfg after installing Mint? And do I not install GRUB for Mint or do I install it in a different location? Any guidance would be appreciated.

    Read the article

  • Reimage several of the same model PC by copying the hard disk

    - by Tim Lehner
    I have several of the same machine (Dell Precision T3500) that originally came with Windows 7 Pro (there is a Windows 7 Pro OA product key sticker on top of each one). These were initially downgraded to XP by a former IT colleague, but are now back in the pool of unused machines. I am looking to format and install Windows 7 Pro on one of them using the latest official Win7 installer ISO with SP1 and then clone the hard drive to the other machines. The questions then, are: Does this even make sense, or is there a better way to do this considering I'm only doing it to 6 machines? Does this jive with MS licensing (we are the original purchaser of the machines, and thus, presumably, the license holder...but I'm no expert)? Is it possible to apply the individual 25-char product keys to the cloned machines after cloning? How far can I go in the config process (installing corporate standard apps and such) before I have to clone to the other machines considering the licensing/key questions?

    Read the article

  • Problem connecting to MySQL with zend

    - by wheresrhys
    I've set up a virtual host on my local machine (windows xp with xampp installed), have installed zend there and am now trying to connect to the MySQLdatabase. I get the following error message: Message: SQLSTATE[HY000] [2003] Can't connect to MySQL server on ''myhost.com'' (10060) All the tips I've found via google haven't helped. I use kaspersky antivirus and have added port 3306 to the allowed list for MySQL and Apache. I've also pinged myhost.com:3306 and get a response (with ip address 67.63.50.51), though localhost:3306 and 127.0.0.1:3306 aren't found. I've checked that other apps can still access MySQL if the virtual host is pointed at them instead and my non zend apps do work. I guess I have to do something further to the port, or maybe force the app to use a different port, but am not sure how to do either. Any help appreciated.

    Read the article

  • How do large companies handle software updates for users without administrative rights?

    - by CT
    I just started working for a small-medium size company doing IT support. Maybe 150 or less users. Right now every user has administrative rights to their own machine. This allows them to install updates or whatever else they would like to. I'm tired of getting on user's machines that are bloated with crap they put on themselves. So my first thought would be to take away administrative rights to their computer. This would also have other advantages such as preventing a lot of drive-by malware on the web etc. The problem arises that users are unable to install updates. (Even though I find most ignore these anyway) How do large companies handle software updates on all client machines? EDIT: Windows environment. Most servers are Windows Server 2003 Enterprise. Clients are all Windows. Win XP, Vista, and 7.

    Read the article

  • Mac OS X: pushing all traffic through a VMWare VM

    - by bj99
    I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

    Read the article

  • Apache does not serve non-locally

    - by yodaj007
    I have a freshly installed instance of Fedora Core 16 inside VirtualBox using bridged networking. On it, as root I typed in: yum -y install httpd service httpd start ifconfig Inside the VM, I can open a web browser to 'localhost' and I get the Apache test page. It works. But in Windows (the machine hosting the VM), I point my browser to the IP address returned by ifconfig (192.168.2.122). The connection times out. I can go to a command prompt and ping the VM. Is there a firewall or something that comes with Fedora by default? Or is there something I need to change in a config file?

    Read the article

  • Proxying fake domain to a localhost port

    - by Trevor Burnham
    I'd like to do much the same thing described at Redirect Domain Name to Localhost for web app development purposes, but with the twist that I'd like requests to fakedomain.com:80 to be routed to localhost:8080, say, so that I don't have to actually use my development machine's port 80. I'd welcome answers that take the form of: Small changes to configuration files like /etc/hosts, and/or An easy-to-configure proxy server I could run Note: Pow takes the approach of setting a firewall rule to forward all incoming traffic on port 80 to port 20559. That may be an acceptable solution, but ideally, I'd like to forward only a specific domain + port combination.

    Read the article

  • publish over ssh jenkins

    - by Pravish
    I have been working on a small project where need to copy files from one windows machine to another through jenkins in a secure way. I have heard about publish over ssh plugin in Jenkins. I tried to set that up but no luck. Did anybody do that and help me in that? Even to resolve it, i had installed openssh with cygwin on both the windows server and tried to copy the files (through SCP) or just connect both hosts (through ssh) in linux way through cygwin but always gets error of - ssh 3612 tty_list::allocate_tty: No tty allocated or scp 2680 tty_list::allocate_tty: No tty allocated Please help!

    Read the article

  • Unable to install Kaspersky anti virus 2011 on XP

    - by Guruprasad
    I recently tried installing Kaspersky antivirus 2011 on my XP (service pack 2) . Everytime I try to install through setup file, it initiates and then I get a pop up message saying Windows XP not compatible ( Sorry could no get the complete error message ) there is also options which come up saying "continue anyway" but it wont allow to click as the system gets hung . I also tried to skip from incompatible software by following the instructions on Kaspersky's website by creating a short cut to setup file and modifying the target field in it but still I get the same message. It also asks me to reboot before I install but it is still the same . Does this mean that I wont be able to install this antivirus software on my machine ? I also wrote to the Kaspersky support but seems they will take ages to reply.

    Read the article

  • how to set auto redirection in tomcat

    - by Registered User
    I have a site http://social.openitup.in right now what you are seeing is a default Tomcat6 page. I am using mod_ajp as a front end and Apache vhost configuration for same is <VirtualHost *:80 > ServerName social.openitup.in ServerAdmin webmaster@localhost ProxyRequests off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPreserveHost On ProxyPass / ajp://192.168.1.19:8009/ ProxyPassReverse / ajp://192.168.1.19:8009/ </VirtualHost> How ever I have an application running on it http://social.openitup.in/olat what I want to do is when some one opens http://social.openitup.in then rather than seeing Tomcat6 home page from /var/lib/tomcat6/webapps/ROOT/index.html the person is redirected to olat application which is in /var/lib/tomcat6/webapps/olat how can this be achived? The above vhost configuration is on a machine separate than where OLAT is running.

    Read the article

  • how can i realize a video-wall on 3-9pc with vlc

    - by Luca
    hello! i have to create a videowall, from 3 to 9 monitor. every monitor as a pc. actually, i stream from a server 9 movies with different istances of VLC, but i could also play on every machine the relative video with a single player. there's no problem. the real problem is that i really dont know how to sync the videos on a LAN...unfortunately there is a NETSYNC module inside VLC wich is NOT working. here are some info about my setup: videowall from 3 to 9 monitor || from 3 to 9 pc, all with the same configuration || a gigabit router+switch for the "dedicated" LAN im really stuck in this situation, if anyone has an idea or just a completely different solution, please, share it with me! thanks a lot in advance! :)

    Read the article

  • Getting "Unable to find a medium containing a live file system" when installing 10.10

    - by Krastin Konstantinov
    I got this error while trying to install ubuntu 10.10 from a bootable USB stick on to Sony Vaio P series laptop. The disk boots into the language and installation type screen. After that it goes through the splash and pulls up this error: BusyBox v1.13.3 (Ubuntu 1:1.13.3-ubuntu11) built in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Unable to find a medium containing a live file system After getting this error the installation fails to start. I have used the same USB stick on some other laptops and the installation started as usual. Any help will be appreciated. My installation is i386 and my machine is Vaio P VGN-P610. I've tried every possible thing: Bios: [enable boot external] Boot order: [external] [hard drive] [network boot] Tried 2 different USB drives Tried 2 different external CD drives Tried 6 different downloads of both the desktop and netbook remix. All downloads were checked with MD5SUM. Ubuntu Desktop 9.10 installs properly in every version and from every source. Getting reaaaally frustrated.

    Read the article

  • Could a computer act (dependably) as a wireless router for 200+ clients? [closed]

    - by awkwardusername
    That is, I have a Core 2 Duo E7500 at 2.93GHz, with 2GB memory. I plan to install either Windows Server 2012 or Zeroshell 2.0RC1, and it also (planning to) includes two PCIe Wireless Card Adapters. It also has one ethernet port, and I will connect that to another machine which will be a Database and a Web Server. My plan is to have a corporate level wireless intranet with 200+ clients. I cannot afford to buy routers because I want to operate at zero costs as possible, utilizing my available resources. Is that plan plausible? Also, what minimum specs should my wireless card have? @SvenW: Oh, I meant corporate on the deployment level. I am still an undergraduate and this is more of an educational and expiremental work than an actual project. I got Windows Server 2012 for free though, and this isn't actually for commercial use.

    Read the article

  • SSD install - what do I need to watch out for when reconfiguring SATA ports?

    - by tim11g
    I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

    Read the article

  • SQL Server Express 2005 SP3 Update Keeps Coming Back (KB995706)

    - by Xavier
    Hi Guys, I have installed the above update through Windows Update. The update went through, reported a successful installation, and then straight after that it came back as an available update. I have done it a few times and my update log now contains multiple successful installations of KB995706. I have tried to uncheck it in the list of updates but it keeps coming back as well. The machine is a Server 2008 RC2 Standard. It's got SQL Server 2005 Express as well as SQL Server 2008 Standard. In the Event Log: Installation Successful: Windows successfully installed the following update: Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706) followed by Installation Ready: The following updates are downloaded and ready for installation. To install the updates, an administrator should log on to this computer and Windows will prompt with further instructions: - Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706)

    Read the article

  • Dell XPS 710 - Boot Device Not Available

    - by WilliamKF
    Recently I was gifted a Dell XPS 710 tower running WinXP SP3. It was running fine until today when I restarted and received a blue screen and the error "unmountable boot volume". In order to fix this issue I've attempted to boot from the Windows XP CD and run chkdsk. However when I attempt to boot from the CD drive I get a "Boot Device not Available" error. Next I made a bootable USB flash drive, but receive the same error as the CD drive. The BIOS recognizes the CD and flash drives, and they appear in the boot device list, but neither will boot. I've attempted to resolve this by re-arranging the boot order in the BIOS and switching IDE channels/setting jumpers on the drives themselves, to no effect. I cannot move the hard drive to another machine because the XPS is the only one that supports SATA drives.

    Read the article

  • What is causing a vm to exhibit packet loss?

    - by Joe Philllips
    We have a pretty nice piece of hardware set up to run multiple virtual machines in vmware and one of the vm's is an instance of Windows Server 2003 running SQL Server 2005. For some reason we occasionally see 10-20 seconds of straight packet loss to this machine from remote machines (my workstation) as well as other vm's on the same physical hardware. I am using PingPlotter to keep a close eye on the packet loss. So far we've turned off flow control on the NIC but we are already running out of other things to try. What might be causing this and how can I identify the problem? Note: We also have another server with a very similar configuration with the same type of problem to a lesser extent (because its not used as heavily?)

    Read the article

  • erratic audio levels on windows vista

    - by old retired dude
    I'm somewhat hard of hearing. I've been listening to my windows Vista machine with a pair of headphones so I don't annoy the others. I have 2 issues: 1) the volume varies enormously depending on the source. Having a windows alert occur while I am listening to a DVD or Youtube is a painful experience. Is there a preferred way to set all the different audio controls so I have a more constant volume? I already have lowered the volumes of the windows alerts. 2)Is there a way to limit the volume of my headphones to protect what is left of my hearing? Is there a software solution or should I be going for a hardware limiter? thanks retired dude

    Read the article

  • Ubuntu 12, chromium/chrome facebook not loading

    - by Grant
    this problem started with chrome, tried chromium to fix it. both have this problem, and after installed firefox no longer works with facebook. I found a threas with two fixes that work and what I need to know is how to make these fixes permanent. one is a cache permissions workaround. launching chromium from terminal with a redirect to a new self created cache in the home folder works. how can i repair the permissions issue with the cache or make a permanent change to the cache chromium uses? two, the ifconfig wlan0 mtu set to 1492, this setting doesnt seem to be perpetual after a reboot. this set of issues is I believe specific to my particular install as there isnt a huge issue from anyone else out there, i'm on a toshiba satellite laptop with a 50/50 HDD partition split with windows. This is likely causing the issue or contributing in some way but I wont run linux full time on this machine until I get these kinks a more permanent fix. Thanks in advance for any advice/answers.

    Read the article

< Previous Page | 510 511 512 513 514 515 516 517 518 519 520 521  | Next Page >