Search Results

Search found 16899 results on 676 pages for 'local'.

Page 515/676 | < Previous Page | 511 512 513 514 515 516 517 518 519 520 521 522  | Next Page >

• Backup Gmail using Mail.app and IMAP without redundancy

  - by Cawas

  I don't care for actually using mail app, I use mostly the gmail interface and mail app just for offline, for quickly reading and eventually replying. Everything is working fine, I think I've followed every guide out there... Here's a great one. But I could find nothing about avoiding redundancy. Well, I can manually do that either by using POP or by checking off most of my labels out of IMAP. But I do use a lot of labels and I often label messages with more than 1 label. And I want them on mail app. Is there anyway to make it keep just 1 copy of repeated messages? Maybe there's a message id or checksum that could be used... If there isn't a way to do it, be assured I still prefer having the extra messages and "wasting" space rather than not having any. edit: I've came across many solutions for finding duplicate files, but they just delete the files. That just make things worst: Mail will just sync it all again. I've realized it's probably better to keep two accounts setup, POP for backup and IMAP for everything else with removing the "All Mail" from it. That's because if the "All Mail" on the server is deleted for any reason, my "All Mail" local will also get deleted, while POP will keep all files regardless of the server. This doesn't solve the redundancy issue at all, but it doesn't create any new issue as well, and I can even use the search properly, without duplicated results, if I search just on the POP. So it helps optimizing a little bit. But I still think the best way to solve this issue would be having something such as aamann's Mail Scripts tweaked to hardlinking the duplicates rather than deleting, and optimized to not need to scan everything every time. I'm trying to contact him and see what we can do. At any pace, I'm still looking for an answer!

  Read the article

• List of Hidden / Virtual Windows User Accounts

  - by Synetech inc.

  I’m trying to find a way to get a comprehensive list of user accounts on a Windows 7 system, including hidden ones. The User Accounts dialog (>control userpasswords2) only shows the normal user accounts, and even the Local User and Groups editor only shows normal user accounts and standard hidden/disabled ones like Administrator and Guest. The Select Users or Groups dialog has a Find Now button which which combines users and groups, but alas, it has the same contents as the LUG. I’m looking for a more comprehensive list that includes “super-hidden” / virtual user accounts like TrustedInstaller (or to be more accurate, NT Service\TrustedInstaller—notice the different “domain”). I checked HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList, but the SpecialAccounts key does not exist. I also checked HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList, and while it does have the SystemProfile, LocalService, and NetworkService accounts listed, it does not have others (like TrustedInstaller and its ilk). TrustedInstaller specifically is a little confusing because it is a user, a service, and an executable file. I am using it as an example because it is “super hidden” in that it does not seem to be listed in any sort of user list. (As an experiment, I tried searching the whole registry for “trustedinstaller” to see if I could find a place where it is listed as a user, but found none.) To be clear, what I am looking for is a list of all accounts that can be used in a user input-field such as in permissions dialogs or as a runas argument.

  Read the article

• Error when restoring database (Windows 7 test environment)

  - by Undh

  I have a windows 7 operating system as a test environment. I have SQL Server EE installed with two instances, named as test and production. I took a full backup from AdventureWorks database from test instance and I tried to restore it into the production instance: RESTORE DATABASE [testikanta] FROM DISK = N'C:\Program Files\Microsoft SQL Server\MSSQL10.SQL2008TESTI\MSSQL\Backup\AdventureWorks.bak' WITH FILE = 1, NOUNLOAD, REPLACE, STATS = 10 GO I got an error saying: Msg 3634, Level 16, State 1, Line 1 The operating system returned the error '32(failed to retrieve text for this error. Reason: 15105)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:\Program Files\Microsoft SQL Server\MSSQL10.SQL2008TESTI\MSSQL\DATA\AdventureWorks_Data.mdf'. Msg 3156, Level 16, State 8, Line 1 File 'AdventureWorks_Data' cannot be restored to 'C:\Program Files\Microsoft SQL Server\MSSQL10.SQL2008TESTI\MSSQL\DATA\AdventureWorks_Data.mdf'. Use WITH MOVE to identify a valid location for the file. Msg 3634, Level 16, State 1, Line 1 The operating system returned the error '32(failed to retrieve text for this error. Reason: 15105)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:\Program Files\Microsoft SQL Server\MSSQL10.SQL2008TESTI\MSSQL\DATA\AdventureWorks_Log.ldf'. Msg 3156, Level 16, State 8, Line 1 File 'AdventureWorks_Log' cannot be restored to 'C:\Program Files\Microsoft SQL Server\MSSQL10.SQL2008TESTI\MSSQL\DATA\AdventureWorks_Log.ldf'. Use WITH MOVE to identify a valid location for the file. Msg 3119, Level 16, State 1, Line 1 Problems were identified while planning for the RESTORE statement. Previous messages provide details. Msg 3013, Level 16, State 1, Line 1 RESTORE DATABASE is terminating abnormally. Where's the problem? I'm running these instances as on local machine adminstrator (SQL Server services are running with the same account).

  Read the article

• Windows Clients: Windows or Linux Domain Controller?

  - by Ramon Marco Navarro

  I'm planning to set up a domain controller for our small computer laboratory. I'm a little confused as to what operating system to use for our domain controller. What's in the lab: The lab has 25 units running a mix of Windows 7 and Windows XP. The domain controller will only have 2GB of RAM running a C2D E7200. (Is this enough?) What we want: The Domain Controller will also be running a git server. The Domain Controller will also be used as a general development machine (mostly Java, PHP). A way to centralize the updates for the windows clients, so that they won't have to download the same patches from the remote site. The machines would just query them from the local domain controller and get the updates from there. Our head recommended that I virtualize a Windows Server 2008 system under a Linux host and use the former as a domain controller and the latter for development or the other way around. A comparison of the advantages and disadvantages of using a Linux distribution or Windows Server 2008 in this situation would also be appreciated. As you may have noticed by now, I'm kinda new to setting up a domain so I hope you guys will be able to help me. Thank you.

  Read the article

• kickstart: reference floppy drive via %ksappend or %include

  - by virtualeyes

  Having trouble getting %ksappend or %include to work when referencing a local floppy drive. Booting off remote server's cd-rom drive I am able to load the CentOS 6 minimal install image, and then add ks=hd:fd0/ks-jvm.cfg to boot params to load kickstart init file from floppy disk. That works fine. The problem is that I want to load a streamlined generic init file off the floppy and then, within the init, %ksappend or %include specific config files relative to the type of server I'm building (JVM, MySQL, Apache, etc.) I do not have DHCP, networking needs to be specified statically, so %ksappend and %include both fail when attempting to reference http://some-LAN-IP/foo.cfg since networking has not yet been set. The kickstart setup only works when I glob in the entire config into a single file, which is great, but ugly and difficult to maintain when I return later, having forgotten the original setup. At this point I'd be happy if I could get %ksappend or %include working with a floppy drive reference in the %post section; that would consolidate a lot of common boilerplate that all kickstarts will rely on (sshd_config, rsync config, resolve.conf, and so on) Thanks for providing the magic floppy drive reference that is eluding me!

  Read the article

• To install Markdown's extensions by Python

  - by Masi

  The installation notes (git://gitorious.org/python-markdown/mainline.git) say in the file using_as_module.txt One of the parameters that you can pass is a list of Extensions. Extensions must be available as python modules either within the markdown.extensions package or on your PYTHONPATH with names starting with mdx_, followed by the name of the extension. Thus, extensions=['footnotes'] will first look for the module markdown.extensions.footnotes, then a module named mdx_footnotes. See the documentation specific to the extension you are using for help in specifying configuration settings for that extension. I put the folder "extensions" to ~/bin/python/ such that my PYTHONPATH is the following export PYTHONPATH=/Users/masi/bin/python/:/opt/local/Library/Frameworks/Python.framework/Versions/2.6/ The instructions say that I need to import the addons such that import markdown import <module-name> However, I cannot see any module in my Python. This suggests me that the extensions are not available as "python modules - - on [my] PYTHONPATH with names starting with mdx_ - -." How can you get Markdown's extensions to work? 2nd attempt I run at ~/bin/markdown git clone git://gitorious.org/python-markdown/mainline.git python-markdown cd python-markdown python setup.py install I put the folder /Users/masi/bin/markdown/python-markdown/build to my PATH because the installation message suggests me that is the new location of the extensions. I have the following in a test markdown -document [TOC] -- headings here with # -format --- However, I do not get the table of contents. This suggests me that we need to somehow activate the extensions when we compile by the markdown.py -script. **The problem returns to my first quoted text which I is rather confusing to me.

  Read the article

• Server compromised. Bounce message contains many email addresses message was not sent to

  - by Tim Duncklee

  This is not a dupe. Please read and understand the issue before marking this as a duplicate question that has been answered already. Several customers are reporting bounce messages like the one below. At first I thought their computers had a virus but then I received one that was server generated so the problem is with the server. I've inspected the logs and these email addresses do not appear in the logs. The only thing I see that I do not remember seeing in the past are entries like this: Apr 30 13:34:49 psa86 qmail-queue-handlers[20994]: hook_dir = '/var/qmail//handlers/before-queue' Apr 30 13:34:49 psa86 qmail-queue-handlers[20994]: recipient[3] = '[email protected]' Apr 30 13:34:49 psa86 qmail-queue-handlers[20994]: handlers dir = '/var/qmail//handlers/before-queue/recipient/[email protected]' I've searched here and the web and maybe I'm just not entering the right search terms but I find nothing on this issue. Does anyone know how a hacker would attach additional email addresses to a message at the server and have them not appear in the logs? CentOS release 5.4, Plesk 8.6, QMail 1.03 Hi. This is the qmail-send program at psa.aaaaaa.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 82.201.133.227 does not like recipient. Remote host said: 550 #5.1.0 Address rejected. Giving up on 82.201.133.227. <[email protected]>: 64.18.7.10 does not like recipient. Remote host said: 550 No such user - psmtp Giving up on 64.18.7.10. <[email protected]>: 173.194.68.27 does not like recipient. Remote host said: 550-5.1.1 The email account that you tried to reach does not exist. Please try 550-5.1.1 double-checking the recipient's email address for typos or 550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1 http://support.google.com/mail/bin/answer.py?answer=6596 w8si1903qag.18 - gsmtp Giving up on 173.194.68.27. <[email protected]>: 207.115.36.23 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.36.23. <[email protected]>: 207.115.37.22 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.22. <[email protected]>: 207.115.37.20 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.20. <[email protected]>: 207.115.37.23 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.23. <[email protected]>: 207.115.36.22 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.36.22. <[email protected]>: 74.205.16.140 does not like recipient. Remote host said: 553 sorry, that domain isn't in my list of allowed rcpthosts; no valid cert for gatewaying (#5.7.1) Giving up on 74.205.16.140. <[email protected]>: 207.115.36.20 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.36.20. <[email protected]>: 207.115.37.21 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.21. <[email protected]>: 192.169.41.23 failed after I sent the message. Remote host said: 554 qq Sorry, no valid recipients (#5.1.3) --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 15962 invoked from network); 1 May 2013 06:49:34 -0400 Received: from exprod6mo107.postini.com (64.18.1.18) by psa.aaaaaa.com with (DHE-RSA-AES256-SHA encrypted) SMTP; 1 May 2013 06:49:34 -0400 Received: from aaaaaa.com (exprod6lut001.postini.com [64.18.1.199]) by exprod6mo107.postini.com (Postfix) with SMTP id 47F80B8CA4 for <[email protected]>; Wed, 1 May 2013 03:49:33 -0700 (PDT) From: "Support" <[email protected]> To: [email protected] Subject: Detected Potential Junk Mail Date: Wed, 1 May 2013 03:49:33 -0700 Dear [email protected], junk mail protection service has detected suspicious email message(s) since your last visit and directed them to your Message Center. You can inspect your suspicious email at: ... UPDATE: After not seeing this problem for a while, I personally sent a message and immediately got a bounce with several bad addresses that I know I did not send to. These are addresses that are not on my system or on the server. This problem happens with both Mac and Windows clients and with messages generated from Postini and sent to users on my system. This is NOT backscatter. If it was backscatter it would not have the contents of my message in it. UPDATE #2 Here is another bounce. This one was sent by me and the bounce came back immediately. Hi. This is the qmail-send program at psa.aaaaaa.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 71.74.56.227 does not like recipient. Remote host said: 550 5.1.1 <[email protected]>... User unknown Giving up on 71.74.56.227. <[email protected]>: Connected to 208.34.236.3 but sender was rejected. Remote host said: 550 5.7.1 This system is configured to reject mail from 174.142.62.210 [174.142.62.210] (Host blacklisted - Found on Realtime Black List server 'bl.mailspike.net') <[email protected]>: 66.96.80.22 failed after I sent the message. Remote host said: 552 sorry, mailbox [email protected] is over quota temporarily (#5.1.1) <[email protected]>: 83.145.109.52 does not like recipient. Remote host said: 550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in virtual mailbox table Giving up on 83.145.109.52. <[email protected]>: 69.49.101.234 does not like recipient. Remote host said: 550 5.7.1 <[email protected]>... H:M12 [174.142.62.210] Connection refused due to abuse. Please see http://mailspike.org/anubis/lookup.html or contact your E-mail provider. Giving up on 69.49.101.234. <[email protected]>: 212.55.154.36 does not like recipient. Remote host said: 550-The account has been suspended for inactivity 550 A conta do destinatario encontra-se suspensa por inactividade (#5.2.1) Giving up on 212.55.154.36. <[email protected]>: 199.168.90.102 failed after I sent the message. Remote host said: 552 Transaction [email protected] failed, remote said "550 No such user" (#5.1.1) <[email protected]>: 98.136.217.192 failed after I sent the message. Remote host said: 554 delivery error: dd Sorry your message to [email protected] cannot be delivered. This account has been disabled or discontinued [#102]. - mta1210.sbc.mail.gq1.yahoo.com --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 2618 invoked from network); 2 Jun 2013 22:32:51 -0400 Received: from 75-138-254-239.dhcp.jcsn.tn.charter.com (HELO ?192.168.0.66?) (75.138.254.239) by psa.aaaaaa.com with SMTP; 2 Jun 2013 22:32:48 -0400 User-Agent: Microsoft-Entourage/12.34.0.120813 Date: Sun, 02 Jun 2013 21:32:39 -0500 Subject: Refinance From: Tim Duncklee <[email protected]> To: Scott jones <[email protected]> Message-ID: <CDD16A79.67344%[email protected]> Thread-Topic: Reference Thread-Index: Ac5gAp2QmTs+LRv0SEOy7AJTX2DWzQ== Mime-version: 1.0 Content-type: multipart/mixed; boundary="B_3453053568_12034440" > This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3453053568_12034440 Content-type: multipart/related; boundary="B_3453053568_11982218" --B_3453053568_11982218 Content-type: multipart/alternative; boundary="B_3453053568_12000660" --B_3453053568_12000660 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable Scott, ... email body here ... Here are the relevant log entries: Jun 2 22:32:50 psa qmail-queue[2616]: mail: all addreses are uncheckable - need to skip scanning (by deny mode) Jun 2 22:32:50 psa qmail-queue[2616]: scan: the message(drweb.tmp.i2SY0n) sent by [email protected] to [email protected] should be passed without checks, because contains uncheckable addresses Jun 2 22:32:50 psa qmail-queue-handlers[2617]: Handlers Filter before-queue for qmail started ... Jun 2 22:32:50 psa qmail-queue-handlers[2617]: [email protected] Jun 2 22:32:50 psa qmail-queue-handlers[2617]: [email protected] Jun 2 22:32:50 psa qmail-queue-handlers[2617]: hook_dir = '/var/qmail//handlers/before-queue' Jun 2 22:32:50 psa qmail-queue-handlers[2617]: recipient[3] = '[email protected]' Jun 2 22:32:50 psa qmail-queue-handlers[2617]: handlers dir = '/var/qmail//handlers/before-queue/recipient/[email protected]' Jun 2 22:32:51 psa qmail: 1370226771.060211 starting delivery 57: msg 1540285 to remote [email protected] Jun 2 22:32:51 psa qmail: 1370226771.060402 status: local 0/10 remote 1/20 Jun 2 22:32:51 psa qmail: 1370226771.060556 new msg 4915232 Jun 2 22:32:51 psa qmail: 1370226771.060671 info msg 4915232: bytes 687899 from <[email protected]> qp 2618 uid 2020 Jun 2 22:32:51 psa qmail-remote-handlers[2619]: Handlers Filter before-remote for qmail started ... Jun 2 22:32:51 psa qmail-queue-handlers[2617]: starter: submitter[2618] exited normally Jun 2 22:32:51 psa qmail-remote-handlers[2619]: from= Jun 2 22:32:51 psa qmail-remote-handlers[2619]: [email protected] Jun 2 22:32:51 psa qmail: 1370226771.078732 starting delivery 58: msg 4915232 to remote [email protected] Jun 2 22:32:51 psa qmail: 1370226771.078825 status: local 0/10 remote 2/20 Jun 2 22:32:51 psa qmail-remote-handlers[2621]: Handlers Filter before-remote for qmail started ... Jun 2 22:32:51 psa qmail-remote-handlers[2621]: [email protected] Jun 2 22:32:51 psa qmail-remote-handlers[2621]: [email protected]

  Read the article

• vhost.conf file in PLESK not working as intended

  - by Saif Bechan

  I have configured a vhost file for my domain but it does not seem to work. These are the steps I took, please correct me if I am wrong. First I made a file called vhost.conf in: /var/www/vhosts/*domain*/conf/vhost.conf The content of the vhost file looks like this: <Directory /var/www/vhosts/*domain*/httpdocs> php_admin_flag engine on php_admin_flag display_errors on </Directory> Now in my /etc/php.ini i set display_errors=Off After everything i rebuild with: /usr/local/psa/admin/sbin/websrvmng -a But I don't see the any errors in my page. When i turn on the display_errors in /etc/php.ini only then can I see the errors. I know for a fact that the vhost file is read, because when i type nonsense values i get an error when restarting apache saying there are errors in the vhost file. Anyone know what the problem can be. Should there be special settings in either the php.ini file or the httpd.conf file. The httpd.conf i edit is in /etc/httpd/conf/httpd.conf. Is this the file that PLESK uses or is there another, because the values i see there do not really reflect the http folders of my domain. The httpd file looks like this now. # The document root DocumentRoot "/var/www/html" # i guess this is the base directory <Directory /> Order Deny,Allow Deny from all Options None AllowOverride None </Directory> # And i guess here are all my domains located, but there aren't any here <Directory "/var/www/html"> Options None AllowOverride None Order allow,deny Allow from all </Directory> Only this directory /var/www/html is not used by me, I use the directory /var/www/vhosts. The only folder found in /var/www/html is a folder called awstats. Does plesk use other files, and where are they located. I hope this all makes sense to anyone, and i hope i can find a solution

  Read the article

• Problems configuring an SSH tunnel to a Nexentastor appliance for use with headless Crashplan

  - by Rob Smallshire

  Problem I am attempting to configure an SSH tunnel to a NexentaStor appliance from either a Windows or Linux computer so that I can connect a Crashplan Desktop GUI to a headless Crashplan server running on the Nexenta box, according to these instructions on the Crashplan support site: Connect to a Headless CrashPlan Desktop. So far, I've failed to get a working SSH tunnel from from either either a Windows client (using Putty) or a Linux client (using command line SSH). I'm fairly sure the problem is at the receiving end with NexentaStor. A blog article - CrashPlan for Backup on Nexenta - indicates that it could be made to work only after "after enabling TCP forwarding in Nexenta in /etc/ssh/sshd_config" - although I'm not sure how to go about that or specifically what I need to do. Things I have tried Ensuring the Crashplan server on the Nexenta box is listening on port 4243 $ netstat -na | grep LISTEN | grep 42 127.0.0.1.4243 *.* 0 0 131072 0 LISTEN *.4242 *.* 0 0 65928 0 LISTEN Establishing a tunnel from a Linux host: $ ssh -L 4200:localhost:4243 admin:10.0.0.56 and then, from another terminal on the Linux host, using telnet to verify the tunnel: $ telnet localhost 4200 Trying ::1... Connected to localhost. Escape character is #^]'. with nothing more, although the Crashplan server should respond with something. From Windows, using PuTTY have followed the instructions on the Crashplan support site to establish an equivalent tunnel, but then telnet on Windows gives me no response at all and the Crashplan GUI can't connect either. The PuTTY log for the tunnelled connection shows reasonable output: ... 2011-11-18 21:09:57 Opened channel for session 2011-11-18 21:09:57 Local port 4200 forwarding to localhost:4243 2011-11-18 21:09:57 Allocated pty (ospeed 38400bps, ispeed 38400bps) 2011-11-18 21:09:57 Started a shell/command 2011-11-18 21:10:09 Opening forwarded connection to localhost:4243 but the telnet localhost 4200 command from Windows does nothing at all - it just waits with a blank terminal. On the NexentaStor server I've examined the /etc/ssh/sshd_config file and everything seems 'normal' - and I've commented out the ListenAddress entries to ensure that I'm listening on all interfaces. How can I establish a tunnel, and how can I verify that it is working?

  Read the article

• Booting the server redis no errors

  - by Tylër

  The redis but usually begins with the following errors: tyler @ tyler-vortex: ~ / pens $. / src / redis-server [3690] Dec 01 10:56:05 # Warning: the specified config file, using the default config. In order to Specify a config file use 'redis-server / path / to / redis.conf' [3690] Dec 01 10:56:05 # Unable to set the max number of files limit to 10032 (Operation not permitted), setting the max configuration to 992 clients. Others errors founds: tyler@tyler-vortex:~/redis$ sudo ./utils/install_server.sh Welcome to the redis service installer This script will help you easily set up a running redis server Please select the redis port for this instance: [6379] Selecting default: 6379 Please select the redis config file name [/etc/redis/6379.conf] Selected default - /etc/redis/6379.conf Please select the redis log file name [/var/log/redis_6379.log] Selected default - /var/log/redis_6379.log Please select the data directory for this instance [/var/lib/redis/6379] Selected default - /var/lib/redis/6379 Please select the redis executable path [/usr/local/bin/redis-server] cat: ./redis.conf.tpl: Arquivo ou diretório não encontrado cat: ./redis_init_script.tpl: Arquivo ou diretório não encontrado ERROR: Could not write init script to /tmp/6379.conf. Aborting! Furthermore, I would like to know how to configure it not to consume so much RAM. Follow the memory configuration of our website, but the settings of "vm-*" does not exist in the file redis.conf. http://redis.io/topics/virtual-memory You have to create them? * Edit: I installed. After that, I believe that I no longer have access via. / Src / redis-server, because it happens: tyler@tyler-vortex:~$ cd redis/ tyler@tyler-vortex:~/redis$ ./src/redis-server [2616] 01 Dec 22:29:30 # Warning: no config file specified, using the default config. In order to specify a config file use 'redis-server /path/to/redis.conf' [2616] 01 Dec 22:29:30 # Opening port 6379: bind: Address already in use tyler@tyler-vortex:~/redis$ But there's another detail, the redistribution starts with the system .. redis 127.0.0.1:6379> exit tyler@tyler-vortex:~/redis$ ./src/redis-cli redis 127.0.0.1:6379> exit ... but how can I now see that the communication had before you installed from. sh?

  Read the article

• iptables -P FORWARD DROP makes port forwarding slow

  - by Isaac

  I have three computers, linked like this: box1 (ubuntu) box2 router & gateway (debian) box3 (opensuse) [10.0.1.1] ---- [10.0.1.18,10.0.2.18,10.0.3.18] ---- [10.0.3.15] | box4, www [10.0.2.1] Among other things I want box2 to do nat and port forwarding, so that I can do ssh -p 2223 box2 to reach box3. For this I have the following iptables script: #!/bin/bash # flush iptables -F INPUT iptables -F FORWARD iptables -F OUTPUT iptables -t nat -F PREROUTING iptables -t nat -F POSTROUTING iptables -t nat -F OUTPUT # default default_action=DROP for chain in INPUT OUTPUT;do iptables -P $chain $default_action done iptables -P FORWARD DROP # allow ssh to local computer allowed_ssh_clients="10.0.1.1 10.0.3.15" for ip in $allowed_ssh_clients;do iptables -A OUTPUT -p tcp --sport 22 -d $ip -j ACCEPT iptables -A INPUT -p tcp --dport 22 -s $ip -j ACCEPT done # allow DNS iptables -A OUTPUT -p udp --dport 53 -m state \ --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p udp --sport 53 -m state \ --state ESTABLISHED,RELATED -j ACCEPT # allow HTTP & HTTPS iptables -A OUTPUT -p tcp -m multiport --dports 80,443 -j ACCEPT iptables -A INPUT -p tcp -m multiport --sports 80,443 -j ACCEPT # # ROUTING # # allow routing echo 1 >/proc/sys/net/ipv4/ip_forward # nat iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # http iptables -A FORWARD -p tcp --dport 80 -j ACCEPT iptables -A FORWARD -p tcp --sport 80 -j ACCEPT # ssh redirect iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 2223 -j DNAT \ --to-destination 10.0.3.15:22 iptables -A FORWARD -p tcp --sport 22 -j ACCEPT iptables -A FORWARD -p tcp --dport 22 -j ACCEPT iptables -A FORWARD -p tcp --sport 1024:65535 -j ACCEPT iptables -A FORWARD -p tcp --dport 1024:65535 -j ACCEPT iptables -I FORWARD -j LOG --log-prefix "iptables denied: " While this works, it takes about 10 seconds to get a password promt from my ssh command. Afterwards, the connection is as responsive as could be. If I change the default policy for my FORWARD chain to "ACCEPT", then the password promt is there imediatly. I have tried analysing the logs, but I can not spot a difference in the logs for ACCEPT/DROP in my FORWARD chain. Also I have tried allowing all the unprivileged ports, as box1 uses thoses for doing ssh to box2. Any hints? (If the whole setup seems strange to you - the point of the exercise is to understand iptables ;))

  Read the article

• How does a web server/the http protocol handle version control and compression?

  - by Sune Rasmussen

  When a client browser requests a file from the web server, I know that some kind of check is performed, because the files needed to serve the web page may already be cached by the web browser. So, if a file exists in the cache, no files are sent. But if the file on the server has changed since the file was cached in the browser, the file is sent and updated anyhow. Then, if you have compression like gzipping enabled on the server, the files that are to be provided to the client must be gzipped on the way, requiring some amount of server side processing. But how is this managed? The logical approach seems to me, that the web server should have a cache as well, containing the newest version of all files that have been requested within a certain time span, thus a compressed version of these files, so that compression would not have to be done each time a files is requested. And also, how are files eventually requested? Does the browser ask for files, each time it encounters one in the HTML code and the specific file is not stored in the local cache, or does it sum all the files that are needed up and ask for the whole bunch at the same time? But that's only guessing from a programming point of view, and I don't really know. If the answers are very different among web server systems, I'm primarily interested in Apache, but other answers are appreciated, too.

  Read the article

• How to repair multiple KDC an Netlogon errors

  - by Keith Sirmons

  Howdy, I have several erros in the system event log of my single Windows 2003 SP2 domain controller. Multiple member computers on the domain are listed in these errors. I am seeing two similar errors for each computer one second apart in the event log. Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was MEMBERNAME$@DOMAIN.LOCAL and lookup type 0x8. followed by Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was MEMBERNAME$ and lookup type 0x8. The Lookup Types are also different, I have 0x8, 0x28, 0x0, 0x20. I am also receiving other authentication errors in the same time frame as all of the KDC errors Event ID 5722 Source NETLOGON The session setup from the computer MEMBERNAME failed to authenticate. The name(s) of the account(s) referenced in the security database is MEMBERNAME$. The following error occurred: Access is denied. I have run dcdiag /v to see if there was something wrong with Active Directory, but all tests passed. I also ran netdiag /v and it appers all of those tests ran. Any ideas on where to start for this issue? Thank you, Keith

  Read the article

• scp error: "Permission denied (publickey). lost connection"

  - by Winston C. Yang

  I tried to scp an svn dump to savannah, but I got the following error at the end. Permission denied (publickey). lost connection The scp command and verbose output are below. Any ideas? [wcyang@be2-wireless-pittnet-60-37 ~]$ scp -v diffcolor-dump.bz2 [email protected]:/srv/download/diffcolor/ Executing: program /usr/bin/ssh host dl.sv.gnu.org, user wcyang, command scp -v -t /srv/download/diffcolor/ OpenSSH_5.2p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to dl.sv.gnu.org [140.186.70.73] port 22. debug1: Connection established. debug1: identity file /Users/wcyang/.ssh/identity type -1 debug1: identity file /Users/wcyang/.ssh/id_rsa type 1 debug1: identity file /Users/wcyang/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'dl.sv.gnu.org' is known and matches the RSA host key. debug1: Found key in /Users/wcyang/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/wcyang/.ssh/identity debug1: Offering public key: /Users/wcyang/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/wcyang/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). lost connection

  Read the article

• Key-Based SSH Permission denied (publickey) Ubuntu 12-04

  - by user125176

  I have configured sshd to accept key-based ssh logins with LogLevel on DEBUG, and uploaded my public key to ~/.ssh.authorized_keys, where permissions are set as: 700 ~/.ssh 600 ~/.ssh/authorized_keys From root, I can su - USERNAME. From the client I get Permission denied (publicly). From the server Here's how it is telling me that it "Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': Permission denied". Client protocol version 2.0; client software version OpenSSH_5.2 match: OpenSSH_5.2 pat OpenSSH* Enabling compatibility mode for protocol 2.0 Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 permanently_set_uid: 105/65534 [preauth] list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth] SSH2_MSG_KEXINIT sent [preauth] SSH2_MSG_KEXINIT received [preauth] kex: client->server aes128-ctr hmac-md5 none [preauth] kex: server->client aes128-ctr hmac-md5 none [preauth] SSH2_MSG_KEX_DH_GEX_REQUEST received [preauth] SSH2_MSG_KEX_DH_GEX_GROUP sent [preauth] expecting SSH2_MSG_KEX_DH_GEX_INIT [preauth] SSH2_MSG_KEX_DH_GEX_REPLY sent [preauth] SSH2_MSG_NEWKEYS sent [preauth] expecting SSH2_MSG_NEWKEYS [preauth] SSH2_MSG_NEWKEYS received [preauth] KEX done [preauth] userauth-request for user USERNAME service ssh-connection method none [preauth] attempt 0 failures 0 [preauth] PAM: initializing for "USERNAME" PAM: setting PAM_RHOST to "USERHOSTNAME" PAM: setting PAM_TTY to "ssh" userauth_send_banner: sent [preauth] userauth-request for user USERNAME service ssh-connection method publickey [preauth] attempt 1 failures 0 [preauth] test whether pkalg/pkblob are acceptable [preauth] Checking blacklist file /usr/share/ssh/blacklist.RSA-4096 Checking blacklist file /etc/ssh/blacklist.RSA-4096 temporarily_use_uid: 1001/1002 (e=0/0) trying public key file /home/USERNAME/.ssh/authorized_keys Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': Permission denied restore_uid: 0/0 temporarily_use_uid: 1001/1002 (e=0/0) trying public key file /home/USERNAME/.ssh/authorized_keys2 Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys2': Permission denied restore_uid: 0/0 Failed publickey for USERNAME from IPADDRESS port 57523 ssh2 Connection closed by IPADDRESS [preauth] do_cleanup [preauth] monitor_read_log: child log fd closed do_cleanup PAM: cleanup

  Read the article

• How to securely enable file sharing over PPTP on Windows 2008 Server

  - by Damage

  I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

  Read the article

• backupexec 12.5 not following symlinks on linux agent

  - by Peter Carrero

  Ok, we are at a loss here trying to backup a linux box to a backupexec server... we got a backupexec 12.5 server and a "backupexec for windows servers linux agent" (sigh) running on one of our linux boxes. When a backup runs, we get exceptions reported for our symbolic links. it says something like: BACKUP- \\<servername>\[ROOT] File \\<servername>\[ROOT]/<foldername>/<symlink> is in the backup selection list but was not found. Looking at the selection list, the symlink shows as a 1k file on BUE. Tools-Options-Backup has Backup files and directories by following symbolic links/junction points selected. These same checkboxes are selected on the Job Setup-Job Properties-Edit Template-Advanced Additionally, all the checkboxes are checkeced on Tools-Options-Linux, Unix, and Macintosh and on the Job Set-Job Properties-Edit Template-Linux, Unix, and Macintosh. These checkboxes read: "Preserve change time", "Follow local mount points", "Follow remote mount points", "Backup contents of soft-linked directories" and "Lock remote files", but apparently changing those options produce the same result. Any help on how to get BUE to make a proper backup would be greatly appreciated. Thanks.

  Read the article

• How can I install Satchmo?

  - by Jonathan Hayward

  I am trying to install Satchmo 0.9 on an Ubuntu 9.10 guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

  Read the article

• Nagios returns "No output returned from plugin" running process

  - by user56291

  I have a nagios server and a bunch of nagios clients that i currently monitor. All the clients are setup with the following nrpe configuration. check_users, check_load... metrics are successfully displayed on the nagios interface but check_nginx and check_server_proxy displayed as "Unknown"-(No output returned from plugin). As far as i understood nagios simply runs ps command and looks for either the argument strings or the name of the command to verify whether the service is running. Also with -c flag, one can give nagios a threshold to determine the output (ie: -c 1 returns 'OK' for if it finds at least 1 process.) nrpe_local.cfg: ###################################### # Do any local nrpe configuration here ###################################### allowed_hosts =127.0.0.1,10.0.2.181 command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10 command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 command[check_all_disks]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200 command[check_swap]=/usr/lib/nagios/plugins/check_swap -w 50% -c 25% command[check_server_proxy]=/usr/lib/nagios/plugins/check_procs -c 1 -a "api-v1/server.js" command[check_nginx]=/usr/lib/nagios/plugins/check_procs -c 1:30 -C nginx nagios_server.cfg ... define host{ use generic-host ; Name of host template to use host_name plum alias plum address 10.0.2.88 check_command check-host-alive-by-ssh } ... #Check api-proxy-server define service{ use generic-service host_name plum service_description check api proxy service check_command check_nrpe!check_server_proxy } define service { use generic-service ; Name of service template to use host_name plum service_description CHECK_NGINX check_period 24x7 max_check_attempts 3 normal_check_interval 5 retry_check_interval 3 check_command check_nrpe!check_nginx notifications_enabled 1 } Also when i run the command on the nagios client: /usr/lib/nagios/plugins/check_procs -c 1 -a "api-v1/server.js" I get the desired output PROCS OK: 1 process with args 'api-v1/server.js' I would really appreciate any pointers that might help me solve why it nrpe command does not return the desired output on the nagios server panel.

  Read the article

• centos postfix send email problem

  - by Catalin

  I have a big problem with postfix. I can receive mail in webmin and outlook but I can't send (only on local I can - user to user). Dovecot is working just fine. Sendmail is disable. Please help me. postfix -n postfix: invalid option -- n postfix: fatal: usage: postfix [-c config_dir] [-Dv] command [root@xprivatecams usr]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = all mail_owner = postfix mailbox_command = mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man milter_default_action = acceptsmtpd_tls_auth_only = no milter_protocol = 2 mydestination = $myhostname, localhost.$mydomain, localhost myhostname = xprivatecams.com mynetworks = 94.177.41.0/24, 127.0.0.0/8 newaliases_path = /usr/bin/newaliases.postfix non_smtpd_milters = inet:localhost:20207 queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_milters = inet:localhost:20207 smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 Jan 18 00:46:17 xprivatecams postfix/postfix-script: starting the Postfix mail system Jan 18 00:46:17 xprivatecams postfix/master[15545]: daemon started -- version 2.3.3, configuration /etc/postfix Jan 18 00:48:00 xprivatecams postfix/pickup[15546]: EDE7EA8001B: uid=0 from=<[email protected]> Jan 18 00:48:00 xprivatecams postfix/cleanup[15817]: EDE7EA8001B: message-id=<[email protected]> Jan 18 00:48:00 xprivatecams opendkim[2776]: EDE7EA8001B: DKIM-Signature header added Jan 18 00:48:01 xprivatecams postfix/qmgr[15547]: EDE7EA8001B: from=<[email protected]>, size=615, nrcpt=1 (queue active) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: connect to mail.flabell.com[72.47.224.75]: Connection timed out (port 25) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: EDE7EA8001B: to=<[email protected]>, relay=none, delay=30, delays=0.08/0.03/30/0, dsn=4.4.1, status=deferred (connect to mail.flabell.com[72.47.224.75]: Connection timed out) telnet 94.177.41.70 25 Trying 94.177.41.70... Connected to xprivatecams.com (94.177.41.70). Escape character is '^]'. 220 xprivatecams.com ESMTP Postfix ehlo me 250-xprivatecams.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN

  Read the article

• Linking Linux MIT Kerberos with a Windows 2003 Active Directory

  - by Beerdude26

  Greetings, I was wondering how one might link a Linux MIT Kerberos with a Windows 2003 Active Directory to achieve the following: A user, [email protected], attempts to log in at an Apache website, which runs on the same server as the Linux MIT Kerberos. The Apache module first asks the local Linux MIT Kerberos if he knows a user by that name or realm. The MIT Kerberos finds out it isn't responsible for that realm, and forwards the request to the Windows 2003 Active Directory. The Windows 2003 Active Directory replies positively and gives this information to the Linux MIT Kerberos, which in turn tells this to the Apache module, which grants the user access to its files. Here is an image of the situation: http://img179.imageshack.us/img179/5092/linux2k3.png (I'm not allowed to embed images just yet.) The documentation I have read concerning this issue often differ from this problem: Some discuss linking up a MIT Kerberos with an Active Directory to gain access to resources on the Active Directory server; While another uses the link to authenticate Windows users to the MIT Kerberos through the Windows 2003 Active Directory. (My problem is the other way around.) So what my question boils down to, is this: Is it possible to have a Linux MIT Kerberos server pass through requests for a Active Directory realm, and then have it receive the reply and give it to the requesting service? (Although it's not a problem if the requesting service and the Windows 2003 Active Directory communicate directly.) Suggestions and constructive criticism are greatly appreciated. :)

  Read the article

• Bind9 configured to start at boot, has to be started manually

  - by antik

  I've configured bind9 on my system and it works great when it runs. It's currently configured to be run at runlevel 2 by setting: $ sudo update-rc.d bind9 enable 2 This appears to have done its work: $ tree -f /etc/rc?.d | grep -e ".*bind9$" |-- /etc/rc0.d/K85bind9 -> ../init.d/bind9 |-- /etc/rc2.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc3.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc4.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc5.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc6.d/K85bind9 -> ../init.d/bind9 Booting the system, I believe I am at runlevel 2: $ runlevel N 2 Given the above configuration, when the system is rebooted, bind does not come up. Only on occasion, for some reason, can I resolve hostnames immediately after startup. Far more often than not however, I cannot. I can interrogate the service's status: $ sudo /etc/init.d/bind9 status * could not access PID file for bind9 When the service doesn't start, I can start it successfully via a terminal by issuing $ sudo /etc/init.d/bind9 start And it works great from then on. Loopback configuration: $ ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1872 errors:0 dropped:0 overruns:0 frame:0 TX packets:1872 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:220205 (220.2 KB) TX bytes:220205 (220.2 KB) Do I have my startup misconfigured? (I'm used to Gentoo so Ubuntu's model is still a little new to me) I'm not seeing any log indication of a failed attempt to start at boot in syslog. Is there someplace else I should be looking? What else should I look into to get bind working at startup?

  Read the article

• openvpn TCP/UDP slow SSH/SMB performance

  - by Petr Latal

  I have question about strange behavior of my openVPN configuration on Debian lenny. I have 2 server configs (one proto tcp-server based and one proto udp based). ISP bandwidth is 7Mbit/7Mbit. When I uses proto tcp-server my download server rate is fine around 6,4 Mbit/s, but upload rate is about 3Mbit/s. When I uses proto udp, my download server rate is around 3Mbit/s and upload rate around 6,4Mbit/s. I tried to handle the MTU, MSSFIX and cipher on/off on server and client configs to synchronize rates, but without solution. Here is TCP based SERVER config: mode server tls-server port 1194 proto tcp-server dev tap0 ifconfig 11.10.15.1 255.255.255.0 ifconfig-pool 11.10.15.2 11.10.15.20 255.255.255.0 push "route 192.168.1.0 255.255.255.0" push "dhcp-option DNS 192.168.1.200" push "route-gateway 11.10.15.1" push "dhcp-option WINS 192.168.1.200" route-up /etc/openvpn/routeup.sh duplicate-cn ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key mssfix cipher BF-CBC Here is UDP based SERVER config: port 1194 proto udp dev tun0 local xx.xx.xx.xx server 11.10.15.0 255.255.255.0 ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 duplicate-cn script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key tun-mtu 1500 mssfix 1212 client-to-client ifconfig-pool-persist ipp.txt Here is TCP/UDP based windows CLIENT config: remote xx.xx.xx.xx --socket-flags TCP_NODELAY tls-client port 1194 proto tcp-client #proto udp dev tap #dev tun pull ca ca.crt cert latis.crt key latis.key mute 0 comp-lzo adaptive verb 3 resolv-retry infinite nobind persist-key auth-user-pass auth-nocache script-security 2 mssfix cipher BF-CBC

  Read the article

• File transfer problems through VPN when Cisco IPS is enabled

  - by Richard West

  We have a Cisco ASA 5510 firewall with the IPS module installed. We have a customer that we must connect to via VPN to their network to exchange files via FTP. We use the Cisco VPN client (version 5.0.01.0600) on our local workstations, which are behind the firewall and subject to the IPS. The VPN client is successful in connecting to the remote site. However when we start the FTP file transfer we are able to upload only 150K to 200K of data, then everything stops. A minute later the VPN session is dropped. I think I have isolated this to an IPS issue by temporarily disabling the Service Policy on the ASA for the IPS with the following command: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 inactive After this command was issued I then established the VPN to the remote site and was successful in transferring the entire file. While still connected to the VPN and FTP session I issued the command to enable the IPS: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 The file transfer was tried again and was once again successful so I closed the FTP session and reopened it, while keeping the same VPN session open. This file transfer was also successful. This told me that nothing with the FTP programs was being filtered or causing the problem. Furthermore, we use FTP to exchange files with many sites everyday without issue. I then disconnected the original VPN session, which was established when the access-list was inactive, and reconnected the VPN session, now with the access-list active. After starting the FTP transfer the file stopped after 150K. To me this seems like the IPS is blocking, or somehow interfering with the initial VPN setup to the remote site. This only started happening last week after the latest IPS signature updates were applied (sig version 407.0). Our previous sig version was 95 days old becuase the system was not auto updating itself. Any ideas on what could be causing this problem?

  Read the article

• Can compressing Program Files save space *and* give a significant boost to SSD performance?

  - by Christopher Galpin

  Considering solid-state disk space is still an expensive resource, compressing large folders has appeal. Thanks to VirtualStore, could Program Files be a case where it might even improve performance? Discovery In particular I have been reading: SSD and NTFS Compression Speed Increase? Does NTFS compression slow SSD/flash performance? Will somebody benchmark whole disk compression (HD,SSD) please? (may have to scroll up) The first link is particularly dreamy, but maybe head a little too far in the clouds. The third link has this sexy semi-log graph (logarithmic scale!). Quote (with notes): Using highly compressable data (IOmeter), you get at most a 30x performance increase [for reads], and at least a 49x performance DECREASE [for writes]. Assuming I interpreted and clarified that sentence correctly, this single user's benchmark has me incredibly interested. Although write performance tanks wretchedly, read performance still soars. It gave me an idea. Idea: VirtualStore It so happens that thanks to sanity saving security features introduced in Windows Vista, write access to certain folders such as Program Files is virtualized for non-administrator processes. Which means, in normal (non-elevated) usage, a program or game's attempt to write data to its install location in Program Files (which is perhaps a poor location) is redirected to %UserProfile%\AppData\Local\VirtualStore, somewhere entirely different. Thus, to my understanding, writes to Program Files should primarily only occur when installing an application. This makes compressing it not only a huge source of space gain, but also a potential candidate for performance gain. Testing The beginning of this post has me a bit timid, it suggests benchmarking NTFS compression on a whole drive is difficult because turning it off "doesn't decompress the objects". However it seems to me the compact command is perfectly capable of doing so for both drives and individual folders. Could it be only marking them for decompression the next time the OS reads from them? I need to find the answer before I begin my own testing.

  Read the article

< Previous Page | 511 512 513 514 515 516 517 518 519 520 521 522  | Next Page >