Search Results

Search found 19365 results on 775 pages for 'machine vision'.

Page 516/775 | < Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • rsync doesn't use delta transfer on first run

    - by ockzon
    I'm trying to synchronize a large local directory (with a batch file using rsync 3.0.7 on Cygwin, Windows 7 x64, 30k files, 200gb size) to a remote server (Debian x64 with kernel 2.6, rsyncd 3.0.7) over a slow internet connection (90kbyte/s upload). I know almost all files are identical and I verified that using md5sum locally and remotely. However when executing rsync from my local machine every file gets transferred completely for the first time. When I terminate the batch file after a few transfers and run it again then the already transferred files are skipped. But as soon as it gets to a file not yet transferred it uploads the file as a whole again instead of noticing that the checksum is the same locally and remotely. The batch file calling rsync looks like this (backslashes and line brakes added here for readability): c:\cygwin\bin\rsync.exe --verbose --human-readable --progress --stats \ --recursive --ignore-times --password-file pwd.txt \ /cygdrive/d/ftp/data/ \ rsync://[email protected]:33400/data/ | \ c:\cygwin\bin\tee.exe --append rsync.log I experimented using the following parameters in varying combinations but that didn't help either: --checksum --partial --partial-dir=/tmp/.rsync-partial --compress

    Read the article

  • Hyper-V Virtual Disk Creation Taking Forver

    - by mnemosyn
    After some struggle, I finally managed to set up Hyper-V 2008 R2 on our server. So I connected to it using the Hyper-V Manager from a Windows 7 client and used the "New Virtual Machine Wizard". I set up a 350GB virtual hard disk. So I hit the "finish" button and the Hyper-V manager has been working for 24hours now, showing merely a dialog "Creating Disk". A console on the Hyper-V still reports 99.9% free space on the HD, but the machines HD LED flashes from time to time (making a rather idle impression, it's not flashing frenetically). Does this usually take this long? Is there a way to find out whether it's still working or just idling? Should I repeat the process? Guides on the net tell me to be patient, but 1d seems a bit extreme!?

    Read the article

  • Windows file server access control by device

    - by Ori Shavit
    I'm trying to build a system where access to certain resources (file shares) in Windows Server, is limited not only by the username (in a Active Directory domain), but also by the client machine. So far, I haven't found a good way to do this; adding the computer account to the DACL is apparently not the way to do it. Windows Server 2012 supports this with Dynamic Access Control, but this method requires all clients to be Windows 8, it seems, with no way to use this with Windows 7 clients. Is there a supported way to do this? (or alternatively, add support for device authorization with Windows 7).

    Read the article

  • Deploying Office 2013 via GPO

    - by NickC
    Looking at potential ways to deploy Office 2013 via GPO. First and most obvious way is to run a startup script which calls the Office 2013 setup.exe. Problem here is what happens after it is installed, will that startup script keep re-installing the product every time the machine boots? Another potential way is to install each Office component separately using the multitude of .msi files which are present, would that work and provide the same thing as a full install of Office? There is actually twenty three separate .msi files. What about officemui.msi is that a wrapper which contains calls to all of the other office components.

    Read the article

  • linux: selective sudo access for a particular command

    - by bguiz
    Hi, Is it possible to grant a particular user sudo access for one particular command only? Thanks -- More info: We farm out lengthy optimisation runs to each other's boxes over ssh. These runs take hours, sometimes days. The shutdown command can only be run in sudo. Being conscious of my environmental footprint, I would like to give the initiator(s) of these runs sudo access to the shutdown command on my box, without sudo access for everything else - so that they may shutdown my machine when they no longer need it. I am aware that I can schedule a shutdown before I leave my box, but I am looking for a better solution.

    Read the article

  • Emulating CP/M under Linux

    - by gh403
    I need to be able to run a very old piece of software -- the HI-TECH z80 C Compiler for CP/M. It has been released as freeware by HI-TECH. Alas, it only runs on CP/M. After a lot of Googling, I found a page of utilities for UZIX. One of those utilities is a script to abstract away the emulation of a CP/M machine, thus allowing you to use the compiler as you would any other UNIX program. The problem with this script is that it depends on their own CP/M emulator, which unfortunately will not compile on a modern (x64) system. My question: is there a usable CP/M emulator for Linux that could be used in a similar fashion? Specifically, I need to be able to somehow have it access files from the host system, a la DOSBox. I'm willing to rewrite a script (I don't have to re-use the UZIX one); I just need an emulator. Thanks for any help!

    Read the article

  • How can I throttle the bandwidth consumed by Windows Automatic Updates?

    - by eleven81
    We have many Windows XP computers sharing one connection to the internet. These machines are set to download all available automatic updates and then prompt the user to install them. Whenever Patch Tuesday rolls around, our internet usage pegs out, and remains that way for most of the day, and sometimes into the following Wednesday. This hurts! I still want the machines to start to download the updates as soon as they are available, but if it takes until Thursday or Friday before the last updates are downloaded, that's still better than the latency and dropped connections we are seeing now as a result of the internet connection bottleneck. What can I do to throttle back how rapidly each machine downloads the updates, while still having them all start the download process as soon as the updates are available? I have no desire to run a WSUS server. Also, the internet connection is more than enough, whenever there are no updates to download.

    Read the article

  • How to force rsync to use destination directory as root

    - by thepurplepixel
    I have a simple script to one-way-sync files/folders within a directory: #!/bin/bash HOST='<hostname>' USER='<username>' DIR='/downloads/' SOURCE='/srv/torrents' rsync -e "ssh -l $USER" --remove-source-files -h -4 -r --stats --progress -i $SOURCE $HOST:$DIR find $SOURCE -type d -empty -prune -exec rmdir -p \{\} \; However, when this rsync operation runs, it creates a folder, torrents in /downloads on the destination machine. How can I force rsync to put all folders & files from /srv/torrents (remote) into /downloads/ (local) instead of creating /downloads/torrents as a separate directory?

    Read the article

  • Open NetApp CIFS Share

    - by kingfish
    I have a CIFS share on a NetApp device. I want this share to be completely open to any user/computer on the same network. I don't want any authentication (domain, workgroup, etc) required; no login/password should need to be provided. Currently I have CIFS configured to use "Domain - Windows 2000" authentication and have the permissions on the share set to "Everyone - Full Read/Write" but if you try to connect to it from a machine that isn't bound to the domain it is asking for login info.

    Read the article

  • HAProxy and 2 webservers

    - by enrico
    I have a website that is split into two different servers: chat server in node.js normal website (lighttpd + php + whatever) now, I have set HAProxy in the same machine as node.js chat, so that when my website is accessed, it will redirect to the chat login. (Eg: mysite.com/messenger) What I want to do now is to put a link on the chat page to send to the other part of the website which has a normal files tree, like home.php, photos.php, settings.php, etc. but I really have no clue how this whole redirection works. Also, what about URL rewriting? If I have like info.php?item=phone and want to change it to mysite.com/phone ... is this something I should do with HAProxy or with lighttpd? Thanks in advance.

    Read the article

  • Mirroring svn repository

    - by cardy
    I have an svn repository and I'd like to have it duplicated over multiple machines for availability purpose. By now when my vps goes down, I'm unable to connect to repository and this is very annoying. Easiest (and expansive) solution is to setup two identical machine and make them work like clones. I'd like to know if there are any alternative (involving 2 machines). Ideally I would have two vps in different datacenters, so if one goes down I can rely on the other. Thanks. I need a mirror both for read and write not only for read. Svn Repos are berkley-db based

    Read the article

  • Set origin for forwarder based on virtual domain in Postfix

    - by Andrew Koester
    I currently have a machine set up to operate with two domains. The main name uses the standard Unix-user delivery, and the second domain is entirely virtual (using virtual_alias_domains and virtual_alias_maps), with the second domain only forwarding mail. However, when mail is forwarded, it still appears to be delivered by the host of the primary domain (presumably set by myorigin.) Is it possible to get it so when mail is forwarded to the virtual domain, it appears to be delivered by it as well? That domain is on another IP and I'd like to use it so the mail stays consistent. Thanks.

    Read the article

  • No monitor output after fresh install of 11.10 64-bit

    - by James
    I have a machine with a Nvidia 8600GT graphics card and a CRT monitor. Previously, I have only used Windows on it, and the graphics card seems to be working correctly in Windows 7. I booted up and installed Ubuntu 11.10 amd64 from the LiveCD and the whole process worked perfectly. When I tried to boot off the hard disk for the first time, the output to the monitor switched off during the splash screen, and this happens consistently. I can ctrl-alt-f2, so I tried an apt-get upgrade, which didn't help; nor did apt-get install nvidia-current. There is nothing that looks relevant in dmesg. Booting with the nomodeset option has no effect. Following the answers in this similar thread, I tried apt-get purge nvidia-173. Both startx and service lightdm start just say the service is already running. Does anyone know how to find out what the problem is? I was wondering if it is just that Ubuntu is trying to use a resolution that the monitor doesn't support, but I can't find out how to change that from the command line.

    Read the article

  • transfer code from one server to other server.

    - by Kamlesh Bhure
    I wanted to transfer new code into my new production server. I have code files on my development server. Instead of uploading files using FTP from my local machine, there is other way to transfer code from one server to other. What I am thinking I will make zip file of whole code to be transfer and place it in webroot. So that it would be accessible in internet with some link http://www.mydomain.com/code.tar.gz now on the other server i will just run command wget http://www.mydomain.com/code.tar.gz Will this transfer done in few seconds...? May I know is this correct approach?

    Read the article

  • suggestions for lonewolf dev setup

    - by d33j
    I'm looking for some suggestions for a better development setup. Background: I'm a crusty old software engineer (mostly java of late) and I have around 50 - 100 incomplete java projects scattered everywhere, usb keys, HDDs, and spanning across 5 or 6 computers etc, which have been put on hold for a few years (ie: family). I have no version control at home. I've been using IntelliJ for around 10 years, so that's the only constant. I'm thinking of nominating one machine as a headless server to put all my projects on, maybe a ubuntu box, that way It won't matter which device I'm on, all my projects can be accessed (and I don't have to waste time actually looking for them). I don't need to access code over the net. These are my own 'happy place' projects so I only work on them when I'm at home, however I can see the benefit of the tasking app being online, that way if I think of something while on public transport lets say, I can add it then & there, but it's not a requirement. I can wait until I get home to create tasks. Summary: So I need some sort of version control so I can rollback mistakes, and some sort of simple tasking software where I can assign tasks for myself later on when I get time. I use Subversion, Sonar, Jira and Crucible at work but I think it's a little bit of an overkill for me though. What do you suggest?

    Read the article

  • USB webcam detected in KVM, but doesn't work

    - by Gene Vincent
    I have installed XP in a virtual machine running on Linux with QEMU/KVM (qemu-kvm-0.11.0-4.5.2). I export my Linux webcam to KVM using the switches "-usb -usbdevice host:046d:0929". The XP guest sees the webcam and the drivers install, but the camera only shows a black image. When I open the camera in Windows Explorer, it says "0 images" and a black image, while on a real XP, it says "1 image" and shows the video from the camera. I tried the same with a different webcam, but the result is the same. Any ideas what might be wrong or how I could debug this ?

    Read the article

  • How can I VPN into a domain and act as if it is local?

    - by Duall
    I've looked and looked and the internet seems to have finally failed me, there's no information on my specific issue. I have two locations, and one server (sbs 2008); I need them to act like one physical LAN. I know it's possible, I just know how to set it up, or anything about VPNs, etc. So, just to clarify a bit more: 1 Small Business Server 2008 ~30 Computers with varying systems from Windows XP to 7 2 Physical Locations I use redirected folders, but since that would consume a lot of bandwith over VPN, I have a machine over there that can be the workhorse for storage. Users need to access e-mail and shared databases from this server (or possibly some form of DFS with aforementioned workhorse) from the other building. Is there a nice tutorial (or I nice person that wants to write it) online that can explain how to set up computers from an external network to act like they were in the LAN?

    Read the article

  • Problems installing icinga-web

    - by Kungurov
    I'm using Ubuntu 10.04 LTS (64bit, Server), Apache 2.2.14 Following the instruction from the oficial icinga page http://docs.icinga.org/latest/en/index.html I installed the icinga-web-1.7.1 on my machine and configured a few hosts for test purposes. The Classic Interface runs as expected but the new Web Interface does not show any data. When I try: ps aux | grep ido2db | grep -v grep I get: icinga 27425 0.0 0.0 41464 600 ? Ss Jul27 0:00 /usr/local/icinga/bin/ido2db -c /usr/local/icinga/etc/ido2db.cfg which might indicate a problem with idomod/ido2db because according to the docs there should be at least 2 processes greped. Any ideas how to fix that?

    Read the article

  • Adobe Illustrator - Objects are Expanded on Restart

    - by Shatou Dev
    I use Adobe Illustrator extensively for mobile development. For example, for Android app, I have many illustrations with different densities and sizes. I use many effects such as outer glow, round corners and such. However, sometimes, when I close the .ai file and re-open it later, I found all my objects expanded. Effects are expanded. For example, the round corner effect is now expanded and I cannot re-size any object. I am using a MacBook Pro. I am suspecting both Time Machine and Dropbox. As much as I can recall, it also appears with CS6 version, not CS5.

    Read the article

  • Couldn't start mysql service in linux

    - by Haseena
    Iam trying to install one version of mysql in a LINUX machine. The system contain already another version of mysql installation. I prefer manual installation. Copy the exctracted tarball into a location and create symbolic link to that. I wish to install my mysql version without affecting already installed mysql version in the system. I created mysqld as service. But It couldn't start. When Iam trying to start this mysqld process, it shows an error like: Starting MySQL............................................................ ......................................... ERROR! The server quit without updating PID file (/var/lib/mysql/Test.pid). Please help me, is any wrong with my installation??? I follow the below mentioned link for installion : http://code.openark.org/blog/mysql/manually-installing-multiple-mysql-instances-on-linux-howto Thanks in Advance

    Read the article

  • Why would Remote Assistance work but not Remote Desktop?

    - by Craig Johnston
    I have managed to get Remote Assistance working between two XP-Pro machines, but as soon as I try Remote Desktop I can't even get to the login screen without an error which gives a list of possibilities and concludes with "See your network administrator", which isn't very helpful. I have ramped up the security level on Remote Desktop including turning on encryption etc. Could this be the problem? I will only get a few hours on the machine at a time so I need to be well-prepared before I attack this problem again. Any ideas?

    Read the article

  • Missing characters when printing in linux

    - by jarvisschultz
    I have a pdf that I was printing recently, and on the final printout there is a single character that doesn't print. It is the greek letter phi, and the pdf was built with pdflatex. The phi shows up in every pdf reader I have tried, and if I convert to a ps using pdftops before printing that solves the problem. Also, I sent the pdf to a buddy who has a very similar machine (Ubuntu 12.04 64 bit, with the same printer drivers), and he was able to print it (to the same printer) and the character showed up. Clearly I have a workaround, but I'm more curious as to where I should be looking to figure out what is causing this bug? What is the printing "toolchain", and where could it be going wrong?

    Read the article

  • Why am I getting 'undefined method' exceptions when executing 'run_list add', 'run_list remove' and 'rackspace server delete'?

    - by Peter Groves
    [Originally posted this to opscode forum, got no response] I’m testing out a free hosted chef-server account and multiple subcommands are failing with ‘Unexpected Errors’. Perhaps my version and the server version are incompatible? OS: Ubuntu 12.04LTS Local Chef: 10.12.0 (Installed through gem) Local Ruby: 1.8.7 Also, the workstation machine has been manually configured, but the client(s) I’ve been experimenting with are launched with the Rackspace plugin (using ‘knife rackspace server create…’) The problem commands seem to fail when talking to the host chef-server, however, before it ever tries to modify the client, so I don’t believe that’s where the problem exists. The virtual-servers that are launched by ‘knife rackspace server create’ are launched properly but then deleting them with knife fails. If I include a recipe in the run_list when I create the server, the recipe is properly added to the run_list. If I try to add it later or remove the one that there server was initialized with, those commands fail. Here is the output of a few relevant commands (with stacktraces): https://gist.github.com/7100ada3fd6690113697

    Read the article

  • Shared volume for data (multiple MDF) and another shared volume for logs (multiple LDF)

    - by hagensoft
    I have 3 instances of SQL Server 2008, each on different machines with multiple databases on each instance. I have 2 separate LUNS on my SAN for MDF and LDF files. The NDX and TempDB files run on the local drive on each machine. Is it O.K. for the 3 instances to share a same volume for the data files and another volume for the log files? I don't have thin provisioning on the SAN so I would like to not constaint disk space creating multiple volumes because I was adviced that I should create a volume (drive letter) for each instance, if not for each database. I am aware that I should split my logs and data files at least. No instance would share the actual database files, just the space on drive. Any help is appretiated.

    Read the article

< Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >