Search Results

Search found 16331 results on 654 pages for 'option'.

Page 516/654 | < Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >

• pppd disconnects from 3G, doesn't reconnect, w/ persist set

  - by bytenik

  I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows: hide-password noauth connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular" debug /dev/cell 921600 defaultroute noipdefault user " " persist maxfail 0 lcp-echo-failure 10 lcp-echo-interval 60 holdoff 5 However, when the peer disconnects the connection, pppd often waits a long time (substantially more than my holdoff) to reconnect the modem -- if it ever reconnects at all! An example log showing this: May 23 05:17:24 00270e0a8888 pppd[2408]: rcvd [LCP TermReq id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: LCP terminated by peer May 23 05:17:24 00270e0a8888 pppd[2408]: Connect time 60.1 minutes. May 23 05:17:24 00270e0a8888 pppd[2408]: Sent 0 bytes, received 0 bytes. May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down started (pid 2456) May 23 05:17:24 00270e0a8888 pppd[2408]: sent [LCP TermAck id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down finished (pid 2456), status = 0x0 May 23 05:17:24 00270e0a8888 pppd[2408]: Hangup (SIGHUP) May 23 05:17:24 00270e0a8888 pppd[2408]: Modem hangup May 23 05:17:24 00270e0a8888 pppd[2408]: Connection terminated. May 23 05:17:24 00270e0a8888 pppd[2408]: Terminating on signal 15 May 23 05:17:24 00270e0a8888 pppd[2408]: Exit. May 23 06:08:07 00270e0a8888 pppd[2500]: pppd 2.4.5 started by root, uid 0 May 23 06:08:10 00270e0a8888 pppd[2500]: Script /usr/sbin/chat -v -f /etc/chatscripts/cellular finished (pid 2530), status = 0x0 May 23 06:08:10 00270e0a8888 pppd[2500]: Serial connection established. May 23 06:08:10 00270e0a8888 pppd[2500]: using channel 11 The disconnect at the request of the peer occurs at 5:17, but the reconnect didn't happen until 6:08. I had a friend monitoring the server so I'm not certain that this wasn't a manual reconnection. Either way, it either took almost an hour to reconnect or never reconnected. Shouldn't persist + holdoff 5 cause this to automatically reconnect after 5 seconds of the link terminating?

  Read the article

• Cisco ASA 5510 Time of Day Based Policing

  - by minamhere

  I have a Cisco ASA 5510 setup at a boarding school. I determined that many (most?) of the students were downloading files, watching movies, etc, during the day and this was causing the academic side of our network to suffer. The students should not even be in their rooms during the day, so I configured the ASA to police their network segment and limit their outbound bandwidth. This resolved all of our academic issues, and everyone was happy. Except the resident students. I have been asked to change/remove the policing policy at the end of the day, to allow the residents access to the unused bandwidth at night. There's no reason to let bandwidth sit unused at night just because it would be abused during the day. Is there a way to setup Time of Day based Policies on the ASA? Ideally I'd like to be able to open up the network at night and all day during weekends. If I can't set Time based policies, is is possible to schedule the ASA to load a set of commands at a specific time? I suppose I could just setup a scheduled task on one of our servers to log in and make the changes with a simple script, but this seems like a hack, and I'm hoping there is a better or more standard way to accomplish this. Thanks. Edit: If there is a totally different solution that would accomplish a similar goal, I'd be interested in that as well. Free/Cheap would be ideal, but if a separate internet connection is my only other option, it might be worth fighting for money for hardware or software to do this better or more efficiently.

  Read the article

• How to choose the most optimal RAID settings on PE2950

  - by javano

  I have some Dell PowerEdge 2950's with 4x 15k, 150GB Cheetah SAS drives in them. They are going to be VM hosts, CentOS running ESXi with Windows Server 2k8 guests. Some guests will be hosting IIS servers, and others MSSQL servers. I am trying to set the RAID virtual disks settings and can't decide which is more optimal given this situation; Read Policy: Out of Read-Ahead, No-Read-Ahead and Adaptive Read-Ahead, the default is Read-Ahead. I will be making large sequential writes initially, writing out blank images for virtual machine hard drives (lets say 30GBs from /dev/zero for example) so Read-Ahead seems good at first. But within the virtual machines reads could be random from anywhere within their file systems as they are IIS and MSSQL servers, so perhaps No-Read-Ahead is a better idea? Now I think Adaptive Read-Ahead would be better then as a compromise but I don't know much about this option, how does it compare in performance to the others? Write Policy: write-back caching, write-through caching, the default is write-back caching. The default of write-back caching is safer than write-through caching but at a performance expense. My thinking here is that in the event of power loss for example, it seems more likely in my head (this is why I need some clarification!) that damage will occur to a guest VM with write-back caching enabled, so I should favour write-through? I have searched around and there is obviously no definitive answer, so I would like to find out what is best for my situation.

  Read the article

• Best way to execute a command after Linux system halt

  - by Lukas Loesche

  Problem: The SSDs in our servers require a power cycle (i.e. off/on, not reset/warm reboot) after a firmware update. Thoughts: Using 'ipmitool chassis power cycle' I can cycle the server's power. However this would cut the power while the system is still running, filesystems are mounted, etc. What I basically want is a delayed power cycle so the system has a change to halt. But I guess that would have to be implemented on the server's IPMI board, so it's not really an option. My initial idea was to dynamically create a ramdisk containing the tool and libs and somehow integrate that into the halt process. I saw there's a /etc/init.d/halt, so that would be my starting point. Although I believe the kernel at some point in the shutdown process starts to kill off remaining processes. So I'm not even sure if that's a viable way. Question: What would be the best way to execute ipmitool (or any other command), after the system has halted and all regular filesystems are unmounted?

  Read the article

• Tcpreplaying using VMware

  - by Methos

  This is more like a testbed setup question. I want to use VMware to debug some networking code in the linux kernel in the VM. My VM has two network interfaces. What I want to do is replay the capture file in the host and receive the packets in the VM. My problem is I do not see replayed packets in the VM. I am running VMware and tcpreplay on the host as sudo. Hence I think there should not be any problem access devices files. I am running VMware workstation 7.0 a. I first began with Custom networking as that provides option of creating your own virtual network name. I wrote /dev/vmnet3 and /dev/vmnet4 for the two interfaces respectively. However, after booting the guest, I did not see any of these interfaces or devices files (in /dev) created on the host. b. Then I tried 'Host Only', but that does not show what bridge/device file is associated with the interface. c. Finally I tried bridged networking mode. I see vmnet1, vmnet8 and vboxnet0 on the host. I have tcpreplayed the capture file on each of these interfaces, for all the above three cases. I tried to capture packets in the VM using "tcpdump -i any". However, I do not see any packets. Any ideas/pointers?

  Read the article

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• Multiple threads stuck on Tomcat behind Apache mod_proxy

  - by Eddy

  we just took a break at butting our collective heads against this maddening problem we're having. Basically this brand new deployment of Tomcat 6.0.36 crawls down to a halt every couple minutes with many of the worker threads stuck as in the example snippet; only after a while the server gets "unstuck" for another couple minutes. The previous Tomcat works a charm though, but keeping it is not really an option... On netstat, we also see a lot of FIN_WAIT and FIN2_WAIT. "catalina-exec-25" daemon prio=10 tid=0x000000004f9d4000 nid=0x7459 runnable [0x0000000044567000] java.lang.Thread.State: RUNNABLE at java.net.SocketOutputStream.socketWrite0(Native Method) at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92) at java.net.SocketOutputStream.write(SocketOutputStream.java:136) at org.apache.coyote.http11.InternalOutputBuffer.realWriteBytes(InternalOutputBuffer.java:756) at org.apache.tomcat.util.buf.ByteChunk.flushBuffer(ByteChunk.java:448) at org.apache.tomcat.util.buf.ByteChunk.append(ByteChunk.java:363) at org.apache.coyote.http11.InternalOutputBuffer$OutputStreamOutputBuffer.doWrite(InternalOutputBuffer.java:780) at org.apache.coyote.http11.filters.IdentityOutputFilter.doWrite(IdentityOutputFilter.java:118) at org.apache.coyote.http11.InternalOutputBuffer.doWrite(InternalOutputBuffer.java:593) at org.apache.coyote.Response.doWrite(Response.java:560) at org.apache.catalina.connector.OutputBuffer.realWriteBytes(OutputBuffer.java:364) at org.apache.tomcat.util.buf.ByteChunk.flushBuffer(ByteChunk.java:448) at org.apache.catalina.connector.OutputBuffer.doFlush(OutputBuffer.java:318) at org.apache.catalina.connector.OutputBuffer.close(OutputBuffer.java:274) at org.apache.catalina.connector.Response.finishResponse(Response.java:493) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:317) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:861) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:606) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:396) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) Any idea? Eddy

  Read the article

• Disable the user of Internet explorer through policies when called from HTML help

  - by Stephane

  Hello, I have a locked down environment where users are prohibited from doing, well, basically anything but run the specific programs we specify. We just switched a program from using the venerable "WinHELP" help format to HTML help (CHM) but that seem to have an unwanted and rather dangerous side effect: when a user click on a hyperlink inside the HTML help, a new internet explorer window is opened and the user is free to browse and do terrible things to my server (well, not that much, but still...) I have checked the session in this case and the IE window is actually hosted within the help engine: there is no iexplore.exe process running in the user session (and it cannot: it's explicitly prohibited). We have disable all help right now until we find a solution. I'm working with the help team to have all external URLs removed from the help file but that is going to be a long and error-prone task. Meanwhile, I've checked all the group policies option but I have to say that I was unable to find anything that would prevent a standalone IE window hosted in a random process from running. I don't want to disable WinHTTP or the IE rendering engine or anything of the sort. But I need to prevent all users members of a specific AD user group from ever having an IE window displayed to them. The servers are running Windows 2003 and Citrix metaframe 4.5. Thanks in advance

  Read the article

• Ways to have audio output without wires

  - by viraptor

  I'm trying to find a way of using my home speakers/amp without actually having to connect them. There are two laptops that use them normally (so I don't like changing the connection all the time) and I'd rather move the speakers to a place that's away from the couch. I'm not sure how to do this though... The options I can think of are: some kind of wireless jack-jack connection finally getting a media server Unfortunately I can't find any good product for the first solution. I've seen some headphones which have the receiver integrated and a separate transmitted, so in general the idea is already out there, just not the way I need ;) I've seen also http://www.miccus.com/products/blubridge-mini-jack, but I'd have to have a compatible receiver which I can't find on its own (maybe there's some application that the media server could use?). As far as media server goes... many of the plug servers look really interesting, but I'm not sure how to create an audio output and how to redirect the input really. None of the plug servers I've seen so far advertises the option of audio output jack port. I think this part could be fixed by getting one with an usb port and a separate cheap usb soundcard. I hope that input can be sorted out in some rather simple way. I've got Linux running on both laptops so I hope that would be possible to configure jack/pulse/whatever to use the remote endpoint, or even write a simple local-/dev/dsp:network:media-server-/dev/dsp forwarder. So the main question is... are there better ways? Are there any out of the box solutions? Or maybe this was already done by someone and described somewhere?

  Read the article

• Hudson deploy specific git revision

  - by brad

  I'm using hudson to auto-deploy my Rails app to heroku. In my main build job I pull from a Git repo (hosted using gitosis on the same machine), master branch with the following: URL of repository: /home/git/repositories/my_app.git Name of repository: origin Refspec: +refs/heads/master:refs/remotes/origin/master Branches to build: master Then, assuming all tests pass, I want to kick off a new build that is the deploy to Heroku. I can't however figure out how to get that deploy build to checkout the particular revision that this build was using. I understand there's a parameterized trigger plugin that would allow me to pass this revision number, but I don't know how I can tell hudson to checkout this particular revision on the deploy build. I'm pretty sure this just has to do with my limited knowledge of git, but where in the hudson git config's is there an option to checkout a particular revision? Otherwise, I could have many commits happen whilst a build is happening, and when it kicks off a deploy build, that deploy build would just check out the HEAD of the branch, which may not be the same as the code that was pushed that triggered this build. I don't fully understand why I have a refspec in Hudson, then also specify a branch to build, I thought this was the same thing. Can refspec somehow specify the revision number? How would this be referenced if it was passed through with the parameterized trigger plugin? (I've never used that plugin, but someone else recommended it as a way to pass in vars to a new build, if there's another way I'm all ears)

  Read the article

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

• Damaged partition after disk image

  - by Charles Gargent

  I am trying to clone/backup a disk with Windows 7 Pro 64bit on it. First I tried Easus Todo Backup and used disk clone option without sector by sector copy. I then plugged in the new drive and I get the following error. "Invalid or damaged Bootable partition" I then plugged the old drive back in and I am greeted with the same error. My next step was to try the sector by sector disk clone, but still I get the same error. I have tried fixing the mbr with the windows disk but that makes no difference. I have tried some other free tools and I get the same error. I have tried this on a different machine running Windows 7 Enterprise 32bit without this problem. I have done some searching and the only thing I can come up with is this post from the Acronis forums http://forum.acronis.com/forum/8254 suggesting that the bios is reading my disk geometry incorrectly. Can anyone shed any light on this, is there a way I can fix this either in the bios or repair the mbr every time I reimage it?

  Read the article

• How to change libcurl SSL backend from gnutls to openssl on Ubuntu server

  - by Jayesh

  I am getting gnutls specific errors in my Tornado webserver while processing Google OpenID SSL responses. One of the suggestions I got from Tornado mailing list is to try OpenSSL backend instead of gnutls. But it doesn't seem to be straightforward on Ubuntu server (11.10). On Ubuntu server, gnutls is provided by libcurl3-gnutls package and openssl curl support is provided by libcurl4-openssl-dev package. (I don't know why the later is named 4 and dev, but I couldn't find any other openssl+curl package in apt-cache search). I had libcurl3-gnutls installed by default, but not libcurl4-openssl-dev. So I installed the later and restarted Torando instances. But that didn't seem to work. I still got same gnutls errors. I found old discussions on curl mailing lists regarding the problems of supporting different SSL backends to libcurl, but didn't find exactly how is it done today. So far my guess is openssl is built into libcurl and gnutls is provided through separate package (that will explain why there is no libcurl3-openssl). But how do I make libcurl to pick up openssl backend and not gnutls? Is there some option in libcurl/pycurl API to do this? I tried uninstalling libcurl3-gnutls, but apt-get prompted that it will also remove python-pycurl along with it. So that won't do.

  Read the article

• Free tiered storage automation in linux?

  - by NginUS

  I have a couple virtualized fileservers running in QEMU/KVM on ProxmoxVE. The physical host has 4 storage tiers with significant performance variances. They're attached both locally and via NFS. These will be provided to the fileserver(s) as local disks, abstracted into pools, and handling multiple streams of data for the network. My aim is for this abstraction layer to intelligently pool the tiers. There's a similar post on the site here: Home-brew automatic tiered storage solutions with Linux? (Memory - SSD - HDD - remote storage) in which the accepted answer was a suggestion to abandon a linux solution for NexentaStor. I like the idea of running NexentaStor. It almost fits the bill. NexentaStor provides Hybrid Storage Pools, and I love the idea of checksumming. 16TB without incurring licensing fees is a huge plus as well. After the expense of the hardware, free is about all my budget can handle. I don't know if zfs pools are adaptive or dynamically allocated based on load, but it becomes irrelevant since NexentaStor doesn't support virtio network or block drivers, which is a must in my environment. Then I saw a commercial solution called SmartMove: http://www.enigmadata.com/smartmove.html And it looks like a step in the right direction, but I'm so broke I'd be wasting their time to even ask for a quote, so I'm looking for another option. I'm after a linux implementation that supports virtio drivers, and I'm at a loss as to which software is up to it.

  Read the article

• Raid1 with active and spare partition

  - by Daniel Baron

  I am having the following problem with a RAID1 software raid partition on my Ubuntu system (10.04 LTS, 2.6.32-24-server in case it matters). One of my disks (sdb5) reported I/O errors and was therefore marked faulty in the array. The array was then degraded with one active device. Hence, I replaced the harddisk, cloned the partition table and added all new partitions to my raid arrays. After syncing all partitions ended up fine, having 2 active devices - except one of them. The partition which reported the faulty disk before, however, did not include the new partition as an active device but as a spare disk: md3 : active raid1 sdb5[2] sda5[1] 4881344 blocks [2/1] [_U] A detailed look reveals: root@server:~# mdadm --detail /dev/md3 [...] Number Major Minor RaidDevice State 2 8 21 0 spare rebuilding /dev/sdb5 1 8 5 1 active sync /dev/sda5 So here is the question: How do I tell my raid to turn the spare disk into an active one? And why has it been added as a spare device? Recreating or reassembling the array is not an option, because it is my root partition. And I can not find any hints to that subject in the Software Raid HOWTO. Any help would be appreciated.

  Read the article

• Inconsistent SMTP Access

  - by Mike Hanson

  I have a mail server setup on Windows Server 2008. All was working fine, until I wanted to map a drive on the server so that I can access files on another machine. Windows prompted me to configure Network Discovery, which I did with the "Home/Office" option rather than "Public". After that, several access points that worked before stopped working, like VNC, SMTP, etc. After reinstalling those packages, things appeared to be working again. Unfortunately, problems have returned with my SMTP server. I can use an web-based SMTP tester, and it connects in 62msec (as expected). However, if I telnet from my machine on the same LAN, it takes more than 20 seconds to connect! When I try to send messages from Outlook, it times out entirely with the message: Sending' reported error (0x80042109) : 'Outlook cannot connect to your outgoing (SMTP) e-mail server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).' I've checked the firewall settings, I've tried configuring it to use port 587 instead of 25, but nothing gets around this problem. Does any have any useful insights? Thanks in advance!

  Read the article

• Group policy not applying to security group

  - by ihavenoideawhatimdoing

  Preface: I have enough privileges to create GPOs in my OU, and have made a few of them for some simple tasks (like deploying a printer to certain users). Not actually a sysadmin...I'm a developer who is winging it. I wanted to create a GPO that would set a mapped folder for a certain security group (which I recently created and that contains only myself). Did the following: Created the GPO in MyOU - Users Removed the default Authenticted Users under Security Filtering Add the security group with my account to Security Filtering Set up the mapping via the User Configuration option Changed GPO Status to "Computer configuration settings disabled" Left WMI filtering to Closed the GPO at this point... Logged in as the target user; ran gpupdate /force Logged out, logged in, ran gpresult /r, no mention of my GPO Rebooted Logged in, re-ran gpupdate /force Logged out, logged in, ran gpresult /r, still no mention of my GPO If I log in with another completely different user, their RSOP information shows that the new GPO is being ignored due to a security restriction, so it appears to be "working" for other users. I just can't get it to actually show up in RSOP for the user it should be working. Is there anything else I can do short of rebooting endlessly and crossing my fingers?

  Read the article

• bind9 named.conf zones size limit

  - by mox601

  I am trying to set up a test environment on my local machine, and I am trying to start a DNS daemon that loads tha configuration from a named.conf.custom file. As long as the size of that file is like 3-4 zones, the bind9 daemon loads fine, but when i enter the config file i need (like 10000 lines long), bind can't startup and in the syslog i find this message: starting BIND 9.7.0-P1 -u bind Jun 14 17:06:06 cibionte-pc named[9785]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' Jun 14 17:06:06 cibionte-pc named[9785]: adjusted limit on open files from 1024 to 1048576 Jun 14 17:06:06 cibionte-pc named[9785]: found 1 CPU, using 1 worker thread Jun 14 17:06:06 cibionte-pc named[9785]: using up to 4096 sockets Jun 14 17:06:06 cibionte-pc named[9785]: loading configuration from '/etc/bind/named.conf' Jun 14 17:06:06 cibionte-pc named[9785]: /etc/bind/named.conf.saferinternet:1: unknown option 'zone' Jun 14 17:06:06 cibionte-pc named[9785]: loading configuration: failure Jun 14 17:06:06 cibionte-pc named[9785]: exiting (due to fatal error) Are there any limits on the file size bind9 is allowed to load?

  Read the article

• Write Fedora.iso to USB and boot it from a Macbook

  - by MTilsted

  I have an .iso image of the full Fedora 16 install (Downloaded from http://fedoraproject.org/en/get-fedora-options#formats as "Fedora 16 DVD") and the question now is: How do I write it on a USB stick, so I can install it on my Mac book? I tried using DD as the install guide said, and that gave me a USB stick which can boot from my PC. But it can't boot from the Mac (The Mac start menu don't show it as a boot option). Edit: I downloaded a live install image, and did this (SSD is my USB 4GB thing) /sbin/mkdosfs -F 32 -n usbdisk /dev/dev/sdd1 sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora-16-i686-Live-KDE.iso /dev/sdd1 And this produced an image which can boot on my pc but not on my mac. This seems to indicate that the --efi is not working, because if it really was EFI it would not boot on a normal pc, would it? I then tried this: (Difference being that I write the image directory to /dev/sdd instead of /dev/sdd1) but this still will not boot on the Mac (it newer shows up at the startup screen on the Mac). sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora- PS: My host Linux is Fedora 13.

  Read the article

• How do I correctly SSH port forward using LiveReload on Redhat?

  - by program247365

  Referencing this page: http://feedback.livereload.com/knowledgebase/articles/86280-if-you-edit-files-directly-on-your-server It says you can remotely port forward the LiveReload specific port of 35729, using this command: ssh -L 35729:127.0.0.1:35729 mylogin@myremoteserverIP When I run the -v option, I get: debug1: Local connections to LOCALHOST:35729 forwarded to remote address 127.0.0.1:35729 debug1: Local forwarding listening on ::1 port 35729. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 35729. debug1: channel 1: new [port listener] debug1: channel 2: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: client_input_channel_req: channel 2 rtype [email protected] reply 1 debug1: Connection to port 35729 forwarding to 127.0.0.1 port 35729 requested. debug1: channel 3: new [direct-tcpip] channel 3: open failed: connect failed: Connection refused debug1: channel 3: free: direct-tcpip: listening port 35729 for 127.0.0.1 port 35729, connect from 127.0.0.1 port 63673, nchannels 4 I thought editing my /etc/services with this line, would work, but it doesn't: livereload 35729/tcp # livereload usage with guard-livereload Every time I attempt to connect with the browser extension, I believe It's getting blocked by my server. What am I missing here? Do I need to edit /etc/services for this to work?

  Read the article

• Windows 8 Doesn't Shutdown Properly With Fast Start-Up Enabled

  - by Patrick

  While Fast start-up is enabled, on turning the computer off (shutdown) the computer idles for about 5min after logging out/screen turning off. It then turns off. On returning into Windows I receive the error message saying Windows didn't shut down properly. Hibernate works fine, and I am told this shouldn't be the case - If one doesn't work, neither should. It works when both Fast start-up is enabled and disabled, as does restart and sleep. Windows is installed under UEFI. The UEFI ultra fast boot option for my motherboard cannot be enabled as my GPU doesn't support some UEFI GOP tech. As far as I know, not related to windows fast start-up, but thought it was worth mentioning. To clarify, if this: http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html is enabled, the computer does not shut down properly. EDIT: Some more information on the matter: Formatting didn't fix the issue. Still fails regardless of drivers installed. Hardware was purchased ~6months ago. Running a good SSD. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Upon installing WPT as suggested below to figure out what was happening during shutdown, and running the cmd xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP Windows fast start-up is now working consistently. Still works upon uninstalling WPT. This is the only change to occur on the computer. Nothing else has bee installed/uninstalled, no Windows Updates, nothing. Windows fast start-up did not work prior to installing WPT and running the cmd (made sure I tested).

  Read the article

• Testing for disk write

  - by Montecristo

  I'm writing an application for storing lots of images (size <5MB) on an ext3 filesystem, this is what I have for now. After some searching here on serverfault I have decided for a structure of directories like this: 000/000/000000001.jpg ... 236/519/236519107.jpg This structure will allow me to save up to 1'000'000'000 images as I'll store a max of 1'000 images in each leaf. I've created it, from a theoretical point of view seems ok to me (though I've no experience on this), but I want to find out what will happen when there will be directories full of files in there. A question about creating this structure: is it better to create it all in one go (takes approx 50 minutes on my pc) or should I create directories as they are needed? From a developer point of view I think the first option is better (no extra waiting time for the user), but from a sysadmin point of view, is this ok? I've thought I could do as if the filesystem is already under the running application, I'll make a script that will save images as fast as it can, monitoring things as follows: how much time does it take for an image to be saved when there is no or little space used? how does this change when the space starts to be used up? how much time does it take for an image to be read from a random leaf? Does this change a lot when there are lots of files? Does launching this command sync; echo 3 | sudo tee /proc/sys/vm/drop_caches has any sense at all? Is this the only thing I have to do to have a clean start if I want to start over again with my tests? Do you have any suggestions or corrections?

  Read the article

• Backup plan for linux webserver in small business?

  - by radman

  Hi, I am currently in the process of writing a backup plan for the webserver in use by my business. I am very new to this area and have a few ideas about how things should work but am unsure of what tools to use and what sort of restore process is appropriate. I'm looking for something relatively simplistic and it doesn't have to be 100% paranoid just enough to give me a reliable backup. Speed is not of the essence and there is not going to be a live fallback in place. The backup will be onto a single hdd that will be stored onsite (no option for offsite as yet). Backups will be taking place weekly. I am constrained by both time and money which is why I'm aiming for a good enough solution. Is taking an image of the webserver system drive periodically and using that as the backup appropriate? Should I be testing that the backups restore correctly every time that I perform one? This is a bit broad but what setup would you use if you were in my place, given the services I am running? Should I add additonal machines and split the services? Any advice is much appreciated! See below for server details Webserver Platform Linux Ubuntu server Running mail-server svn-server mediawiki wordpress apache-webserver Hardware single 500gb sata drive Architecture Single machine behind router (with firewall) accessible to the internet.

  Read the article

• Modifier key bug with Adobe Design Standard CS4 (Mac OS 10.6.6)

  - by Andy

  When I launch the Adobe apps, they ask me if I want to delete the preferences file. I say 'no'. Then, when using the apps, none of the tools seem to work properly, eg in Illustrator, I can't move objects without it duplicating the object. Photoshop constantly displays the contextual menu icon that usually only appears when you hold down the control key. I can't do any work in them when this happens, so I am forced to log out and then back in. They work for a while and then this annoying bug happens again. I think it must be to do with the modifier keys (command option and control). I think Adobe's apps must think I'm permanently pressing the modifier keys down - the thing is, no other app on my machine has this problem! Does anyone else experience this? Or have a fix for it? Any suggestions much appreciated. Running: Mac OS X 10.6.6 on an iMac. Adobe CS4 Design standard installed.

  Read the article

• PowerPoint avoid animation completion on click & advance slide or start new one

  - by ScottS

  Scenario I have PowerPoint 2010 On the "Transitions" tab the "Advance Slide On Mouse Click" check box is checked. I have a long, slow, timed, non-repeating animation working in the background of the slide. I click to advance the slide before the animation is finished, but ... Instead of advancing the slide, the animation moves to the completed state ... Forcing a second click to actually advance the slide. Additionally If I have other animations on the slide that are initiated by a click, the long animation also advances to a finished state before starting the new animation. Desired Behavior On click, I want the slide to advance or the next on-click animation to start whether the long animation is done or not, and without having that long animation first "complete" itself. In the case of another animation, I simply want the long animation to continue, while also doing the new animation. Ultimate Question Is there a way to either: Set an option somewhere to not have that animation complete on click and simply "continue" to animate with the start of a new animation or to advance the slide (as the case may be)? Create a VBA script that will produce the desired behavior for the long animation?

  Read the article

< Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >