Search Results

Search found 17870 results on 715 pages for 'screen resolution'.

Page 516/715 | < Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >

• No longer able to run photo software on XP

  - by Peter

  I have Olympus Master 2 and Photoimpression 6 on my system which is running with XP Pro. Both programmes ran fine till recently and neither now works. I have run Avira and AVG anti virus (only one loaded at a time), Superantispyware, Spybot and Malwarebytes and removed the usual dross but no help. I have also uninstalled and reinstalled both several times but again no help. Both programmes load but the Olympus one immediately passes to the usual 'its met a problem and needs to close'...Photoimpression loads fully but as soon as I go to the edit screen it gives the same message. I have tried another profile to no avail. Any idea why this is and what the solution is??

  Read the article

• Transfered SSL Certificate to Rackspace Cloud Server - Occasional Errors

  - by ngl5000

  Okay, I recently tranfered my Comodo SSL certificate from my previous Bluehost account to my new rackspace cloud server. (LAMP stack) Basically I just copy pasted the server cert and key and checked to make sure it was properly installed which it was. Now I am running into some issues, occasionally I will hear from people that they are getting an 'Untrusted Connection Error' while others are not getting this error at all. Recently someone sent me a screen shot of their error and it said: This Certificate is not trusted because no issuer chain was provided. The browser they noticed this on was safari so I cleared all my history data in safari and opened the site but I am not seeing that error. Does anyone have any idea how to fix something like this? Thanks!

  Read the article

• Windows 7 on 1st Gen MacbookPro Unibody (Q4-2008) - power problems.

  - by typemismatch

  I have the first generation macbook pro, purchased Q4 2008. I've been trying to run Windows 7 and can get it all installed great with the BootCamp 3.1 64 bit drivers however ... power management isn't great. The screen and keyboard don't automatically dim - the laptop gets too hot. I noticed on some newer macbook pros that windows 7 works perfectly and the above doesn't happen. Does anyone know if there really is a hardware issue with this 1st gen or is there some firmware update I can use to fix this? Thanks!

  Read the article

• Impact Earth Lets You Simulate Asteroid Impacts

  - by Jason Fitzpatrick

  If you’re looking for a little morbid simulation to cap off your Friday afternoon, this interactive asteroid impact simulator makes it easy to the results of asteroid impacts big and small. The simulator is the result of a collaboration between Purdue University and the Imperial College of London. You can adjust the size, density, impact angle, and impact velocity of the asteroid as well as change the target from water to land. The only feature missing is the ability to select a specific location as the point of impact (if you want to know what a direct strike to Paris would yield, for example, you’ll have to do your own layering). Once you plug all that information in, you’re treated to a little 3D animation as the simulator crunches the numbers. After it finishes you’ll see a breakdown of a variety of effects including the size of the crater, the energy of the impact, seismic effects, and more. Hit up the link below to take it for a spin. Impact Earth [via Boing Boing] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• Chromium OS Lime installation confusion

  - by Abhinav Kulshreshtha

  I Used to download Chromium Vanilla build Virtual-box image from hexxeh. recently i wanted to try Lime build which only gives a .img file. I used the mentioned Windows Image Writer (link given on the lime website.) and a 8GB Transcend Website. When i tried to boot from pen-drive, the screen only flashed and nothing happened. Now when i tried to access my pendrive, it shows only 0.99 gb capacity. What happened wrong. How can i recover my pendrive. I tried to create vdi using VBoxManage.exe convertdd chromiumos.img chromiumos.vdi command given in This link. But it is not running on VBox either.

  Read the article

• Triple-display setup using AMD drivers

  - by Halik

  I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

  Read the article

• How much power supply do I need for my server, and could a shortage be causing my odd crashing?

  - by dolan

  I have 5 servers, all with similar hardware (i7, four 2tb 7200rpm drives, two 4tb 5400rpm drives, 430 watt power supply), and lately the machines have been freezing up. This has gotten worse in the last day or so, and I can't pinpoint any explanation. One recent change was adding the two 4tb hard drives. The crashes happen most often while running a large Hadoop job, so I was originally thinking the load was causing some issues, but last night one server just froze without any heavy load on the box (or so I think), other than HDFS (Hadoop's distributed file system) was probably rebalancing itself since two of the five nodes were offline. If I plugin a monitor and keyboard to one of these frozen machines, I can't get any response or feedback on the screen. Any ideas on possible points of failure and/or different logs I can look at to investigate? Thanks Edit: The systems are running Ubuntu 10.04 Edit 2: More on hardware: intel core i7-930 bloomfield 2.8ghz processor (quad core) 12gb (6 x 2gb) kingston ddr3 1333 ram antec earthwatts green 430 power supply msi x58m lga 1366 motherboard

  Read the article

• How to configure Linux to act as a Bluetooth RFCOMM SPP server?

  - by regulatre

  I'm writing a phone app for Android that connects to a bluetooth RFCOMM device in my car. My phone app talks AT commands with it. For development work, I often need to communicate with the device to try different commands and things. My neighbors are starting to think I'm weird because I sit in my car for hours on end with my laptop screen shining on my face, typing away like a script kiddie. I'd much rather configure one of my many Linux servers to act as a bluetooth RFCOMM device and allow me to connect to it (indoors, while I sit on my couch). I imagine I have to start with something like sdptool add SP But then what? I'm perfectly happy writing a perl app to handle the I/O, but I just don't know how to make the bluez stack accept connections and subsequently pipe that stream to a perl app.

  Read the article

• Reporting Solution in PHP / CodeIgniter - Server side logic vs client side

  - by dot

  I'm building a report for an end user. They would like to see a list of all widgets... but then also like to see widgets with missing attributes, like missing names, or missing size. So i was thinking of creating one method that returns json data containing all widgets... and then using javascript to let them filter the data for missing data, instead of requerying the database. Ultimately, they need to be able to save all "reports" (filtered versions of data) inside a csv file. These are the two options I'm mulling over: Design 1 Create 3 separate methods in my controller/model like: get_all_data() get_records_with_missing_names() get_records_with_missing_size() And then when these methods are called, I would display the data on screen and give them a button to save to csv file. Design 2 Create one method called get_all_data() and then somehow, give them tools in the view to filter the json data using tables etc... and then letting them save subsets of the data. The reality is, in order to display all data, I still need to massage the data, and therefore, I know which records are missing attributes. So i'd rather not create separate methods by each filter. I'm not sure how I would do that just yet but at this point, i would like to know some pros/cons of each method. Thanks.

  Read the article

• How can I make my Virtualbox Vista see my USB device (iPad)?

  - by phil

  I have the latest VirtualBox. I have filters for the iPad. But it does not show up in my virtual Windows vista My Computer screen or virtual iTunes. When I try to right click the little USB icon and select it it says it failed because the device is busy with a previous request Result code: E_INVALIDARG (0X80070057) Component: HostUSBDevice Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee: IConsole {515e8e8d-f932-4d8e-9f32-79a52aead882} Any help is greatly appreciated Note: running 64bit Windows Vista Virtual on a 64bit Windows Vista (Home Premium) EDIT: my iPad is in recovery mode, maybe why it can't be seen in virtualbox? Also my host is running Zonealarm firewall and Microsoft Security Essentials. In addition the guest has AVG antivirus. Could those programs conflict with virtualbox?

  Read the article

• How do I open multiple windows when Outlook 2010 starts?

  - by Eric

  OS: Windows 7 64-bit App: Outlook 2010 32-bit Server: Exchange 2010 I'd like to modify Outlook's default startup behavior so that it shows both my Inbox and Calendar when I click my shortcut. I use both of them all day, and know how to just right-click the calendar and select "Open in New Window." I run my inbox on one screen and my calendar on another. I also configured my calendar to be the folder that opens by default when I start Outlook so I don't miss early appointments, but if I could somehow have BOTH open in two separate windows, that would be awesome. Is there a command-line interface or something that can accomplish this? Thanks in advance.

  Read the article

• move existing Windows XP to a new harddrive

  - by MrKanister

  I've bought a SSD for my laptop and made a fresh install of Windows 7. On my old HDD I've got a Windows XP system, which I would like to move to the SSD. I've tried it this way: put the HDD to an USB case moved the Windows XP partition to a partition on my ssd usind DriveImage XML used EasyBCD 2.0 to create a new entry in the boot menue The problem: Windows XP is booting up, but before the login-screen comes up, it seems to freeze. No bluescreens, no errors - just nothing happens. I tried to start it in "protected mode", but the same results. I'm not sure if DriveImage XML didn't worked well or if there's another reason.

  Read the article

• To Run Linux (Ubuntu) on Windows 7, is using Virtual PC one of the best ways?

  - by Jian Lin

  I need to try Linux (Ubuntu) and feel hesitant to install Ubuntu on top of a Win 7 machine to dual boot (might need to use Win7 and Ubuntu at the same time). Is creating a Virtual PC on Win7, and then installing the latest Ubuntu on that Virtual PC one of the better option? So I think I can create a Virtual PC with an empty virtual hard disk (vhd), say, for 30GB, and then put in the Ubuntu DVD-R or CD-R to install Ubuntu onto that empty hard disk. Update: for some reason, the first time Ubuntu 10.04 installation CD-R boots up, it asked for the Language, and "Install Ubuntu" and then the screen has vertical green bars and then the VPC just closed. The 2nd or 3rd time it booted up, there is no asking of Language or "Install Ubuntu" and just shut down the VPC, sometimes with vertical green bars. I even created another new hard drive and same thing happened. And created VPC 02, and same thing happened. Created VPC 03 with a fixed hard drive size of 60GB and same thing happened.

  Read the article

• Shutting down Ubuntu 11.10 with power button without x11-session

  - by RJdaMoD

  when pressing the power-button inside a (gnome-)session, ubuntu asks me what to do and shuts down after 60 seconds anyway. No problem so far. But if i'm not logged in in a gnome-session (for example in the login screen), or just change to a tty, then the power-button won't work. But i remember that i worked in 11.04. So what's changed and how to restore? Background: I use my machine as a print server. If im not home and my wife wants to print sth., she used to switch on my machine, print via her laptop, and then just shut it down by power-button. Beginning of march i was on a business tour, and she called me that she could not shutdown my machine anymore. I shut it down by ssh, but this seems not the favorable way to me. I already had a look in /etc/acpi/powerbtn.sh and think that the line if pidof x $PMS > /dev/null; then exit is the cause for this since it aborts the script when no gui-power-manager is found. Is that right? But that does not explain with the power-button does not work when switching from the x11-session to a tty, although this would not be critical to me. Thanks in advance Greetings RJ

  Read the article

• Adding delay between damage

  - by iQue

  I have a bunch of enemies chasing my main-character, and if they intersect I want them to damage him and that's all good. The problem is that right now they damage him as long as they stand around him, every frame! and since it gets called every frame my character's HP reaches 0 almost instantly. I've tried adding delay and I've tried a timertask, but can't get it to work. This is the code I use to check for intersection: private void checkCollision(Canvas canvas) { synchronized (getHolder()) { Rect h1 = happy.getBounds(); for (int i = 0; i < enemies.size(); i++) { for (int j = 0; j < bullets.size(); j++) { Rect b1 = bullets.get(j).getBounds(); Rect e1 = enemies.get(i).getBounds(); if (b1.intersect(e1)) { enemies.get(i).damageHP(5); bullets.remove(j); } if(e1.intersect(h1)){ happy.damageHP(5); // this is the statement that needs some sort of delay, I want them to damage him every 2 seconds they intersect him. } if(enemies.get(i).getHP() <= 0){ enemies.get(i).death(canvas, enemies); score.incScore(5); break; } if(happy.getHP() <= 0){ score.incScore(-50); //end-screen } } } } } If anyone knows the logic to do this please do tell.

  Read the article

• Why does my macbook pro keep freezing?

  - by mac

  Once in a while my macbook pro 10.8.2 freezes for a couple of seconds, this is really annoying. Mouse gets frozen, I can't move it, and screen gets frozen. These are the last messages from the kernel, how to solve this? Sandbox: sandboxd(38380) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38410) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38429) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38463) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38495) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38513) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38550) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38581) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38599) deny mach-lookup com.apple.coresymbolicationd CODE SIGNING: cs_invalid_page(0x1000): p=38605[GoogleSoftwareUp] clearing CS_VALID Sandbox: sandboxd(38632) deny mach-lookup com.apple.coresymbolicationd

  Read the article

• Graphic Setup tune-up checklist

  - by Click Ok

  I was trying to play the game Warzone 2100 and the games runs fine, with nice speed, but the screen stays with a horizontal lines "flickering"... My PC have a integrated GeForce Go 6100 vga. Ok, not a powerfull vga, but it's not the end of the world to run a "simple" game like this (compared with another games that ask you send your eyes to purchase a expensive vga). So, I think that the problem can be of the configuration of my machine. I use it in first instance for programming jobs, so I underpay attention to video setup. I would like about a checklist to know if my PC is "ready" to games. By example, I know that I need: Lastest vga drivers Updated DirectX and OpenGL What you suggest? There is too some good programs to test performance and suggests improvements in the system? Thank you! PS: I'm using Windows 7

  Read the article

• TraceTune: Improved Comment View

  - by Bill Graziano

  I wanted an easier way to identify queries I’d already looked at so I could skip them.  I’ve been entering comments for each query as I review it.  These comments typically fall into three categories: a change I made, no easy fix available or something needs to be changed on the client.  TraceTune now highlights any statement with a comment in bold.  If you hover over the statement you’ll see the most recent comment for that statement. This gives me a quick way to see what’s new and identify those queries that still need work.  This is especially helpful when I come back to a server after weeks or months away.  These comments help jar my memory and remind me what I’ve worked on. I made the font slightly smaller in some of the tables.  It’s still readable but I’m able to get more of a SQL statement on the screen.  I also got to re-experience the pain of Internet Explorer, Chrome and FireFox all displaying text (and pop-up text) slightly different. Seeing the comments on a trace has been a big help to me.  I often do a round of tuning and then don’t come back to a server until months later.  Having the comments available helps me get back up to speed quickly.

  Read the article

• AMD E-450 APU with HD-6320 graphics produces jerky videos

  - by user80424

  I try to make videos smooth playing on a Lenovo E325 laptop equipped with AMD E-450 APU. This processor have Ati HD-6320 GPU integrated. I installed ATI proprietary driver (Catalyst 12.04) as described here. Everything went fine and got no errors. However I can not play smooth HD videos. Almost every second frame has been dropped in VLC with hardware acceleration enabled. vainfo shows: libva: VA-API version 0.32.0 Xlib: extension "XFree86-DRI" missing on display ":0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so libva: va_openDriver() returns 0 vainfo: VA-API version: 0.32 (libva 1.0.15) vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.7.8 vainfo: Supported profile and entrypoints VAProfileH264High : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD fglrxinfo says: display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6320 Graphics OpenGL version string: 4.2.11631 Compatibility Profile Context and fgl_glxgears produces ~250fps. Why are HD video frames dropped? CPU doesn't goes above 50% during playback.

  Read the article

• Ubuntu 9.10 freezes when HDMI port is connected

  - by Felipe Hummel

  Hi, I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

  Read the article

• Why doesn't Ghost 2003 offer to fill the destination drive?

  - by Neil

  Because it is dangerously low on disk space, I want to upgrade an SBS 2003 server by replacing its existing 72GB drive with a 364GB drive. When I tried to use Norton Ghost 2003 to clone the disk it didn't suggest that I use the entire new drive. I'm worried that I caused the process to fail by overriding its decision - although the cloned drive boots in Safe Mode, if I try booting it normally then none of the SQL Express instances start and something causes the server to reboot before even the Ctrl+Alt+Del screen appears. Does Ghost 2003 know something that I don't? Or should I be using some other software?

  Read the article

• vim: highlighting a search term without moving the cursor

  - by ajwood

  Using Vim, I sometimes find myself staring at a section of source code for a while and suddenly want some variable on the screen to pop out. That's easy: /<var> which highlights them all. My issue is that it more often than not the search shifts my window so I'm not looking at the source code from the same place. Even if it's only shifted a few lines, it's still throws me off since I need to take a few seconds to figure out where things have moved to. Is it possible to highlight a search term without moving the cursor to the next match?

  Read the article

• View the Time & Date in Chrome When Hiding Your Taskbar

  - by Asian Angel

  Do you prefer keeping your Taskbar hidden but still need to keep watch on what time it is? Now you can keep track of the time without the Taskbar using the Date Today extension for Google Chrome. A Look at Date Today with Different Themes This extension does one thing and does it well…it provides you with an “active icon” clock that will let you view the time and date in two fashions. The first is by hovering your mouse over the “Toolbar Clock Button”… And the second is by clicking on the “Toolbar Clock Button” to view an enlarged version. Here you can see the extension in use with five different themes to get an idea of how it might look with the theme that you are currently using. It does stand out very nicely with brighter or darker colored themes. Conclusion While this extension is obviously not for everyone it will make a nice (and useful) addition to Chrome for those who prefer keeping their Taskbar hidden. Links Download the Date Today extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Set the Date and Time on SolarisView Browser History Based on Host & Date in ChromeQuick Tip: Set a Future Date for a Post in WordPressFuture Date a Post in Windows Live WriterSave Screen Space by Hiding the Bookmarks Toolbar in Safari for Windows TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs

  Read the article

• Faster 2D Collision detection

  - by eShredder

  Recently I've been working on a fast-paced 2d shooter and I came across a mighty problem. Collision detection. Sure, it is working, but it is very slow. My goal is: Have lots of enemies on screen and have them to not touch each other. All of the enemies are chasing the player entity. Most of them have the same speed so sooner or later they all end up taking the same space while chasing the player. This really drops the fun factor since, for the player, it looks like you are being chased by one enemy only. To prevent them to take the same space I added a collision detection (a very basic 2D detection, the only method I know of) which is. Enemy class update method Loop through all enemies (continue; if the loop points at this object) If enemy object intersects with this object Push enemy object away from this enemy object This works fine. As long as I only have <200 enemy entities that is. When I get closer to 300-350 enemy entities my frame rate begins to drop heavily. First I thought it was bad rendering so I removed their draw call. This did not help at all so of course I realised it was the update method. The only heavy part in their update method is this each-enemy-loops-through-every-enemy part. When I get closer to 300 enemies the game does a 90000 (300x300) step itteration. My my~ I'm sure there must be another way to aproach this collision detection. Though I have no idea how. The pages I find is about how to actually do the collision between two objects or how to check collision between an object and a tile. I already know those two things. tl;dr? How do I aproach collision detection between LOTS of entities? Quick edit: If it is to any help, I'm using C# XNA.

  Read the article

• How to get "Fn" keys to work (Asus 4830T)? (specificly, the "suspend" key)

  - by Pointy

  I've got an Asus 4830T onto which I've just re-installed 12.04 because I installed an SSD. I was running 12.04 before too, which had been upgraded over a few releases. At some point on that old install, I had gotten all the "Fn" keys to work, or at least all the ones I cared about. (Oh except I think the screen brightness keys never worked.) I have no recollection of what I did. Anyway now things are fine, and some of the Fn keys work: the one to turn of the trackpad and the one to turn off wireless (grr I hate that one). However, the "suspend" key for some reason does not work. Now the system will suspend and resume just fine, but I'm having to do it from the menu. Is there an easy (or hard) way to make those work? I'm running straight Ubuntu but with Xfce installed as my normal desktop. (In other words, it's not Xubuntu, though I doubt it matters.) I recall at some point having found some arcane mapping mechanism to bind the Fn keys to actions, but I can't find it now. (I'm perfectly OK with editing weird files; I'm a long-time Unix user.) (Very long-time.)

  Read the article

< Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >