actor model - Page 519 - Developer IT

Cisco 800 series won't forward port

- by sam

Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

Read the article

NoSQL with RavenDB and ASP.NET MVC - Part 2

- by shiju

In my previous post, we have discussed on how to work with RavenDB document database in an ASP.NET MVC application. We have setup RavenDB for our ASP.NET MVC application and did basic CRUD operations against a simple domain entity. In this post, let’s discuss on domain entity with deep object graph and how to query against RavenDB documents using Indexes.Let's create two domain entities for our demo ASP.NET MVC appplication public class Category { public string Id { get; set; } [Required(ErrorMessage = "Name Required")] [StringLength(25, ErrorMessage = "Must be less than 25 characters")] public string Name { get; set;} public string Description { get; set; } public List<Expense> Expenses { get; set; } public Category() { Expenses = new List<Expense>(); } } public class Expense { public string Id { get; set; } public Category Category { get; set; } public string Transaction { get; set; } public DateTime Date { get; set; } public double Amount { get; set; } } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category.Let's create ASP.NET MVC view model for Expense transaction public class ExpenseViewModel { public string Id { get; set; } public string CategoryId { get; set; } [Required(ErrorMessage = "Transaction Required")] public string Transaction { get; set; } [Required(ErrorMessage = "Date Required")] public DateTime Date { get; set; } [Required(ErrorMessage = "Amount Required")] public double Amount { get; set; } public IEnumerable<SelectListItem> Category { get; set; } } Let's create a contract type for Expense Repository public interface IExpenseRepository { Expense Load(string id); IEnumerable<Expense> GetExpenseTransactions(DateTime startDate,DateTime endDate); void Save(Expense expense,string categoryId); void Delete(string id); } Let's create a concrete type for Expense Repository for handling CRUD operations. public class ExpenseRepository : IExpenseRepository { private IDocumentSession session; public ExpenseRepository() { session = MvcApplication.CurrentSession; } public Expense Load(string id) { return session.Load<Expense>(id); } public IEnumerable<Expense> GetExpenseTransactions(DateTime startDate, DateTime endDate) { //Querying using the Index name "ExpenseTransactions" //filtering with dates var expenses = session.LuceneQuery<Expense>("ExpenseTransactions") .WaitForNonStaleResults() .Where(exp => exp.Date >= startDate && exp.Date <= endDate) .ToArray(); return expenses; } public void Save(Expense expense,string categoryId) { var category = session.Load<Category>(categoryId); if (string.IsNullOrEmpty(expense.Id)) { //new expense transaction expense.Category = category; session.Store(expense); } else { //modifying an existing expense transaction var expenseToEdit = Load(expense.Id); //Copy values to expenseToEdit ModelCopier.CopyModel(expense, expenseToEdit); //set category object expenseToEdit.Category = category; } //save changes session.SaveChanges(); } public void Delete(string id) { var expense = Load(id); session.Delete<Expense>(expense); session.SaveChanges(); } } Insert/Update Expense Transaction The Save method is used for both insert a new expense record and modifying an existing expense transaction. For a new expense transaction, we store the expense object with associated category into document session object and load the existing expense object and assign values to it for editing a existing record. public void Save(Expense expense,string categoryId) { var category = session.Load<Category>(categoryId); if (string.IsNullOrEmpty(expense.Id)) { //new expense transaction expense.Category = category; session.Store(expense); } else { //modifying an existing expense transaction var expenseToEdit = Load(expense.Id); //Copy values to expenseToEdit ModelCopier.CopyModel(expense, expenseToEdit); //set category object expenseToEdit.Category = category; } //save changes session.SaveChanges(); } Querying Expense transactions public IEnumerable<Expense> GetExpenseTransactions(DateTime startDate, DateTime endDate) { //Querying using the Index name "ExpenseTransactions" //filtering with dates var expenses = session.LuceneQuery<Expense>("ExpenseTransactions") .WaitForNonStaleResults() .Where(exp => exp.Date >= startDate && exp.Date <= endDate) .ToArray(); return expenses; } The GetExpenseTransactions method returns expense transactions using a LINQ query expression with a Date comparison filter. The Lucene Query is using a index named "ExpenseTransactions" for getting the result set. In RavenDB, Indexes are LINQ queries stored in the RavenDB server and would be executed on the background and will perform query against the JSON documents. Indexes will be working with a lucene query expression or a set operation. Indexes are composed using a Map and Reduce function. Check out Ayende's blog post on Map/Reduce We can create index using RavenDB web admin tool as well as programmitically using its Client API. The below shows the screen shot of creating index using web admin tool. We can also create Indexes using Raven Cleint API as shown in the following code documentStore.DatabaseCommands.PutIndex("ExpenseTransactions", new IndexDefinition<Expense,Expense>() { Map = Expenses => from exp in Expenses select new { exp.Date } }); In the Map function, we used a Linq expression as shown in the following from exp in docs.Expensesselect new { exp.Date };We have not used a Reduce function for the above index. A Reduce function is useful while performing aggregate functions based on the results from the Map function. Indexes can be use with set operations of RavenDB.SET OperationsUnlike other document databases, RavenDB supports set based operations that lets you to perform updates, deletes and inserts to the bulk_docs endpoint of RavenDB. For doing this, you just pass a query to a Index as shown in the following commandDELETE http://localhost:8080/bulk_docs/ExpenseTransactions?query=Date:20100531The above command using the Index named "ExpenseTransactions" for querying the documents with Date filter and will delete all the documents that match the query criteria. The above command is equivalent of the following queryDELETE FROM ExpensesWHERE Date='2010-05-31' Controller & ActionsWe have created Expense Repository class for performing CRUD operations for the Expense transactions. Let's create a controller class for handling expense transactions. public class ExpenseController : Controller { private ICategoryRepository categoyRepository; private IExpenseRepository expenseRepository; public ExpenseController(ICategoryRepository categoyRepository, IExpenseRepository expenseRepository) { this.categoyRepository = categoyRepository; this.expenseRepository = expenseRepository; } //Get Expense transactions based on dates public ActionResult Index(DateTime? StartDate, DateTime? EndDate) { //If date is not passed, take current month's first and last dte DateTime dtNow; dtNow = DateTime.Today; if (!StartDate.HasValue) { StartDate = new DateTime(dtNow.Year, dtNow.Month, 1); EndDate = StartDate.Value.AddMonths(1).AddDays(-1); } //take last date of startdate's month, if endate is not passed if (StartDate.HasValue && !EndDate.HasValue) { EndDate = (new DateTime(StartDate.Value.Year, StartDate.Value.Month, 1)).AddMonths(1).AddDays(-1); } var expenses = expenseRepository.GetExpenseTransactions(StartDate.Value, EndDate.Value); if (Request.IsAjaxRequest()) { return PartialView("ExpenseList", expenses); } ViewData.Add("StartDate", StartDate.Value.ToShortDateString()); ViewData.Add("EndDate", EndDate.Value.ToShortDateString()); return View(expenses); } // GET: /Expense/Edit public ActionResult Edit(string id) { var expenseModel = new ExpenseViewModel(); var expense = expenseRepository.Load(id); ModelCopier.CopyModel(expense, expenseModel); var categories = categoyRepository.GetCategories(); expenseModel.Category = categories.ToSelectListItems(expense.Category.Id.ToString()); return View("Save", expenseModel); } // // GET: /Expense/Create public ActionResult Create() { var expenseModel = new ExpenseViewModel(); var categories = categoyRepository.GetCategories(); expenseModel.Category = categories.ToSelectListItems("-1"); expenseModel.Date = DateTime.Today; return View("Save", expenseModel); } // // POST: /Expense/Save // Insert/Update Expense Tansaction [HttpPost] public ActionResult Save(ExpenseViewModel expenseViewModel) { try { if (!ModelState.IsValid) { var categories = categoyRepository.GetCategories(); expenseViewModel.Category = categories.ToSelectListItems(expenseViewModel.CategoryId); return View("Save", expenseViewModel); } var expense=new Expense(); ModelCopier.CopyModel(expenseViewModel, expense); expenseRepository.Save(expense, expenseViewModel.CategoryId); return RedirectToAction("Index"); } catch { return View(); } } //Delete a Expense Transaction public ActionResult Delete(string id) { expenseRepository.Delete(id); return RedirectToAction("Index"); } } Download the Source - You can download the source code from http://ravenmvc.codeplex.com

Read the article

ASP.NET and HTML5 Local Storage

- by Stephen Walther

My favorite feature of HTML5, hands-down, is HTML5 local storage (aka DOM storage). By taking advantage of HTML5 local storage, you can dramatically improve the performance of your data-driven ASP.NET applications by caching data in the browser persistently. Think of HTML5 local storage like browser cookies, but much better. Like cookies, local storage is persistent. When you add something to browser local storage, it remains there when the user returns to the website (possibly days or months later). Importantly, unlike the cookie storage limitation of 4KB, you can store up to 10 megabytes in HTML5 local storage. Because HTML5 local storage works with the latest versions of all modern browsers (IE, Firefox, Chrome, Safari), you can start taking advantage of this HTML5 feature in your applications right now. Why use HTML5 Local Storage? I use HTML5 Local Storage in the JavaScript Reference application: http://Superexpert.com/JavaScriptReference The JavaScript Reference application is an HTML5 app that provides an interactive reference for all of the syntax elements of JavaScript (You can read more about the application and download the source code for the application here). When you open the application for the first time, all of the entries are transferred from the server to the browser (all 300+ entries). All of the entries are stored in local storage. When you open the application in the future, only changes are transferred from the server to the browser. The benefit of this approach is that the application performs extremely fast. When you click the details link to view details on a particular entry, the entry details appear instantly because all of the entries are stored on the client machine. When you perform key-up searches, by typing in the filter textbox, matching entries are displayed very quickly because the entries are being filtered on the local machine. This approach can have a dramatic effect on the performance of any interactive data-driven web application. Interacting with data on the client is almost always faster than interacting with the same data on the server. Retrieving Data from the Server In the JavaScript Reference application, I use Microsoft WCF Data Services to expose data to the browser. WCF Data Services generates a REST interface for your data automatically. Here are the steps: Create your database tables in Microsoft SQL Server. For example, I created a database named ReferenceDB and a database table named Entities. Use the Entity Framework to generate your data model. For example, I used the Entity Framework to generate a class named ReferenceDBEntities and a class named Entities. Expose your data through WCF Data Services. I added a WCF Data Service to my project and modified the data service class to look like this: using System.Data.Services; using System.Data.Services.Common; using System.Web; using JavaScriptReference.Models; namespace JavaScriptReference.Services { [System.ServiceModel.ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class EntryService : DataService<ReferenceDBEntities> { // This method is called only once to initialize service-wide policies. public static void InitializeService(DataServiceConfiguration config) { config.UseVerboseErrors = true; config.SetEntitySetAccessRule("*", EntitySetRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } // Define a change interceptor for the Products entity set. [ChangeInterceptor("Entries")] public void OnChangeEntries(Entry entry, UpdateOperations operations) { if (!HttpContext.Current.Request.IsAuthenticated) { throw new DataServiceException("Cannot update reference unless authenticated."); } } } } The WCF data service is named EntryService. Notice that it derives from DataService<ReferenceEntitites>. Because it derives from DataService<ReferenceEntities>, the data service exposes the contents of the ReferenceEntitiesDB database. In the code above, I defined a ChangeInterceptor to prevent un-authenticated users from making changes to the database. Anyone can retrieve data through the service, but only authenticated users are allowed to make changes. After you expose data through a WCF Data Service, you can use jQuery to retrieve the data by performing an Ajax call. For example, I am using an Ajax call that looks something like this to retrieve the JavaScript entries from the EntryService.svc data service: $.ajax({ dataType: "json", url: “/Services/EntryService.svc/Entries”, success: function (result) { var data = callback(result["d"]); } }); Notice that you must unwrap the data using result[“d”]. After you unwrap the data, you have a JavaScript array of the entries. I’m transferring all 300+ entries from the server to the client when the application is opened for the first time. In other words, I transfer the entire database from the server to the client, once and only once, when the application is opened for the first time. The data is transferred using JSON. Here is a fragment: { "d" : [ { "__metadata": { "uri": "http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries(1)", "type": "ReferenceDBModel.Entry" }, "Id": 1, "Name": "Global", "Browsers": "ff3_6,ie8,ie9,c8,sf5,es3,es5", "Syntax": "object", "ShortDescription": "Contains global variables and functions", "FullDescription": "<p>\nThe Global object is determined by the host environment. In web browsers, the Global object is the same as the windows object.\n</p>\n<p>\nYou can use the keyword <code>this</code> to refer to the Global object when in the global context (outside of any function).\n</p>\n<p>\nThe Global object holds all global variables and functions. For example, the following code demonstrates that the global <code>movieTitle</code> variable refers to the same thing as <code>window.movieTitle</code> and <code>this.movieTitle</code>.\n</p>\n<pre>\nvar movieTitle = \"Star Wars\";\nconsole.log(movieTitle === this.movieTitle); // true\nconsole.log(movieTitle === window.movieTitle); // true\n</pre>\n", "LastUpdated": "634298578273756641", "IsDeleted": false, "OwnerId": null }, { "__metadata": { "uri": "http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries(2)", "type": "ReferenceDBModel.Entry" }, "Id": 2, "Name": "eval(string)", "Browsers": "ff3_6,ie8,ie9,c8,sf5,es3,es5", "Syntax": "function", "ShortDescription": "Evaluates and executes JavaScript code dynamically", "FullDescription": "<p>\nThe following code evaluates and executes the string \"3+5\" at runtime.\n</p>\n<pre>\nvar result = eval(\"3+5\");\nconsole.log(result); // returns 8\n</pre>\n<p>\nYou can rewrite the code above like this:\n</p>\n<pre>\nvar result;\neval(\"result = 3+5\");\nconsole.log(result);\n</pre>", "LastUpdated": "634298580913817644", "IsDeleted": false, "OwnerId": 1 } … ]} I worried about the amount of time that it would take to transfer the records. According to Google Chome, it takes about 5 seconds to retrieve all 300+ records on a broadband connection over the Internet. 5 seconds is a small price to pay to avoid performing any server fetches of the data in the future. And here are the estimated times using different types of connections using Fiddler: Notice that using a modem, it takes 33 seconds to download the database. 33 seconds is a significant chunk of time. So, I would not use the approach of transferring the entire database up front if you expect a significant portion of your website audience to connect to your website with a modem. Adding Data to HTML5 Local Storage After the JavaScript entries are retrieved from the server, the entries are stored in HTML5 local storage. Here’s the reference documentation for HTML5 storage for Internet Explorer: http://msdn.microsoft.com/en-us/library/cc197062(VS.85).aspx You access local storage by accessing the windows.localStorage object in JavaScript. This object contains key/value pairs. For example, you can use the following JavaScript code to add a new item to local storage: <script type="text/javascript"> window.localStorage.setItem("message", "Hello World!"); </script> You can use the Google Chrome Storage tab in the Developer Tools (hit CTRL-SHIFT I in Chrome) to view items added to local storage: After you add an item to local storage, you can read it at any time in the future by using the window.localStorage.getItem() method: <script type="text/javascript"> window.localStorage.setItem("message", "Hello World!"); </script> You only can add strings to local storage and not JavaScript objects such as arrays. Therefore, before adding a JavaScript object to local storage, you need to convert it into a JSON string. In the JavaScript Reference application, I use a wrapper around local storage that looks something like this: function Storage() { this.get = function (name) { return JSON.parse(window.localStorage.getItem(name)); }; this.set = function (name, value) { window.localStorage.setItem(name, JSON.stringify(value)); }; this.clear = function () { window.localStorage.clear(); }; } If you use the wrapper above, then you can add arbitrary JavaScript objects to local storage like this: var store = new Storage(); // Add array to storage var products = [ {name:"Fish", price:2.33}, {name:"Bacon", price:1.33} ]; store.set("products", products); // Retrieve items from storage var products = store.get("products"); Modern browsers support the JSON object natively. If you need the script above to work with older browsers then you should download the JSON2.js library from: https://github.com/douglascrockford/JSON-js The JSON2 library will use the native JSON object if a browser already supports JSON. Merging Server Changes with Browser Local Storage When you first open the JavaScript Reference application, the entire database of JavaScript entries is transferred from the server to the browser. Two items are added to local storage: entries and entriesLastUpdated. The first item contains the entire entries database (a big JSON string of entries). The second item, a timestamp, represents the version of the entries. Whenever you open the JavaScript Reference in the future, the entriesLastUpdated timestamp is passed to the server. Only records that have been deleted, updated, or added since entriesLastUpdated are transferred to the browser. The OData query to get the latest updates looks like this: http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries?$filter=(LastUpdated%20gt%20634301199890494792L) If you remove URL encoding, the query looks like this: http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries?$filter=(LastUpdated gt 634301199890494792L) This query returns only those entries where the value of LastUpdated > 634301199890494792 (the version timestamp). The changes – new JavaScript entries, deleted entries, and updated entries – are merged with the existing entries in local storage. The JavaScript code for performing the merge is contained in the EntriesHelper.js file. The merge() method looks like this: merge: function (oldEntries, newEntries) { // concat (this performs the add) oldEntries = oldEntries || []; var mergedEntries = oldEntries.concat(newEntries); // sort this.sortByIdThenLastUpdated(mergedEntries); // prune duplicates (this performs the update) mergedEntries = this.pruneDuplicates(mergedEntries); // delete mergedEntries = this.removeIsDeleted(mergedEntries); // Sort this.sortByName(mergedEntries); return mergedEntries; }, The contents of local storage are then updated with the merged entries. I spent several hours writing the merge() method (much longer than I expected). I found two resources to be extremely useful. First, I wrote extensive unit tests for the merge() method. I wrote the unit tests using server-side JavaScript. I describe this approach to writing unit tests in this blog entry. The unit tests are included in the JavaScript Reference source code. Second, I found the following blog entry to be super useful (thanks Nick!): http://nicksnettravels.builttoroam.com/post/2010/08/03/OData-Synchronization-with-WCF-Data-Services.aspx One big challenge that I encountered involved timestamps. I originally tried to store an actual UTC time as the value of the entriesLastUpdated item. I quickly discovered that trying to work with dates in JSON turned out to be a big can of worms that I did not want to open. Next, I tried to use a SQL timestamp column. However, I learned that OData cannot handle the timestamp data type when doing a filter query. Therefore, I ended up using a bigint column in SQL and manually creating the value when a record is updated. I overrode the SaveChanges() method to look something like this: public override int SaveChanges(SaveOptions options) { var changes = this.ObjectStateManager.GetObjectStateEntries( EntityState.Modified | EntityState.Added | EntityState.Deleted); foreach (var change in changes) { var entity = change.Entity as IEntityTracking; if (entity != null) { entity.LastUpdated = DateTime.Now.Ticks; } } return base.SaveChanges(options); } Notice that I assign Date.Now.Ticks to the entity.LastUpdated property whenever an entry is modified, added, or deleted. Summary After building the JavaScript Reference application, I am convinced that HTML5 local storage can have a dramatic impact on the performance of any data-driven web application. If you are building a web application that involves extensive interaction with data then I recommend that you take advantage of this new feature included in the HTML5 standard.

Read the article

CodePlex Daily Summary for Thursday, June 30, 2011

CodePlex Daily Summary for Thursday, June 30, 2011Popular ReleasesASP.NET Comet Ajax Library (Reverse Ajax - Server Push): Reverse Ajax Samples v1.53: 16 Comprehensive ASP.NET Ajax / Reverse Ajax / WCF / MVC / Mono samplesReactive Extensions - Extensions (Rxx): Rxx 1.1: What's NewRelated Work Items Please read the latest release notes for details about what's new. About LabsAll "Labs" downloads include the Rxx.dll assembly, so only a single download is required. To start RxxLabs.exe, right-mouse click and select Run as Administrator; otherwise, do not run the Reactive WebClient lab because it will crash the program. RxxLabs.exe requires administrator privileges for the Reactive WebClient lab to register a local HTTP port. To launch the Silverlight labs...CommonLibrary.NET: CommonLibrary.NET - 0.9.7 Final: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.7Documentation 6738 6503 New 6535 Enhancements 6759 6748 6583 6737datajs - JavaScript Library for data-centric web applications: datajs version 1.0.0: datajs is a cross-browser and UI agnostic JavaScript library that enables data-centric web applications with the following features: OData client that enables CRUD operations including batching and metadata support using both ATOM and JSON payloads. Single store abstraction that provides a common API on top of HTML5 local storage technologies. Data cache component that allows reading data ranges from a collection and storing them locally to reduce the number of network requests. Changes...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.4.4: Fix for http://coding4fun.codeplex.com/workitem/6869 was incomplete. Back button wouldn't return app bar. Corrected now. High impact bugSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.528.279): Added keyboard shortcuts: - Cut (CTRL+X) - Copy (CTRL+C) - Paste (CTRL+V) - Delete (CTRL+D) - Move up (CTRL+UP ARROW) - Move down (CTRL+DOWN ARROW) Added ability to save/load SiteMap from/to a Xml file on disk Bug fix: - Connect to a server through the status bar was throwing error "Object Reference not set to an instance of an object" - Rename TreeNode.Name after changing TreeNode.TextMicrosoft - Domain Oriented N-Layered .NET 4.0 App Sample: V2.01 ALPHA N-Layered SampleApp .NET 4.0 and EF4.1: V2.0.01 - ALPHARequired Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power ...Mosaic Project: Mosaic Alpha build 261: - Fixed crash when pinning applications in x64 OS - Added Hub to video widget. It shows videos from Video library (only .wmv and .avi). Can work slow if there are too much files. - Fixed some issues with scrolling - Fixed bug with html widgets - Fixed bug in Gmail widget - Added html today widget missed in previous release - Now Mosaic saves running widgets if you restarting from optionsEnhSim: EnhSim 2.4.9 BETA: 2.4.9 BETAThis release supports WoW patch 4.2 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in some of th....NET Reflector Add-Ins: Reflector V7 Add-Ins: All the add-ins compiled for Reflector V7TerrariViewer: TerrariViewer v4.1 [4.0 Bug Fixes]: Version 4.1 ChangelogChanged how users will Open Player files (This change makes it much easier) This allowed me to remove the "Current player file" labels that were present Changed file control icons Added submit bug button Various Bug Fixes Fixed crashes related to clicking on buffs before a character is loaded Fixed crashes related to selecting "No Buff" when choosing a new buff Fixed crashes related to clicking on a "Max" button on the buff tab before a character is loaded Cor...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta8: ??AcDown???????????????，?????????????????????。????????????????????，??Acfun、Bilibili、???、???、?????，???????????、???????。 AcDown???????????????????????????，???，???????????????????。 AcDown???????C#??，?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ??v3.0 Beta8 ?? ??????????????? ???????????????(??????????) ???????...BlogEngine.NET: BlogEngine.NET 2.5: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.5 instructions. To get started, be sure to check out our installatio...PHP Manager for IIS: PHP Manager 1.2 for IIS 7: This release contains all the functionality available in 62183 plus the following additions: Command Line Support via PowerShell - now it is possible to manage and script PHP installations on IIS by using Windows PowerShell. More information is available at Managing PHP installations with PHP Manager command line. Detection and alert when using local PHP handler - if a web site or a directory has a local copy of PHP handler mapping then the configuration changes made on upper configuration ...MiniTwitter: 1.71: MiniTwitter 1.71 ???? ?? OAuth ???????????? ????????、??????????????????? ???????????????????????SizeOnDisk: 1.0.10.0: Fix: issue 327: size format error when save settings Fix: some UI bindings trouble (sorting, refresh) Fix: user settings file deletion when corrupted Feature: TreeView virtualization (better speed with many folders) Feature: New file type DataGrid column Feature: In KByte view, show size of file < 1024B and > 0 with 3 decimal Feature: New language: Italian Task: Cleanup for speedRawr: Rawr 4.2.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...N2 CMS: 2.2: * Web platform installer support available ** Nuget support available What's newDinamico Templates (beta) - an MVC3 & Razor based template pack using the template-first! development paradigm Boilerplate CSS & HTML5 Advanced theming with css comipilation (concrete, dark, roadwork, terracotta) Template-first! development style Content, news, listing, slider, image sizes, search, sitemap, globalization, youtube, google map Display Tokens - replaces text tokens with rendered content (usag...KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5New Projects{Adjunct} functionality for the .NET framework: A project to provide Ingots for the .NET framework.3Webee.net: 3Webee.net is the First Navigator dedicated to Web.3.0 by P2P. Developped in C# for DotNet-3.5 or Mono.net, compatible with Linux ready. Website.fr : http://3webee.net/ Download Win32 : http://3webee.net/Download/3Webee.net.beta.0.0.Win32.exe AB Donor Choose Planner: The goal of this doantion planner is to allow you to coordinate the completion of one or more Donors Choose projects. The tool gives you a portfolio view of the donations you would like to invest in by targeting your investments in a location/regional focused manner.appperu1: asdasdsaddas: ColinTestingasdfFindClone: Find clone files, find duplicate files, remove duplicate filesfirstcpapp: This is my appForecast Parser: The NOAA hosts forecast data accessible over the web. These libraries download and parse seven day hourly forecast data and encapsulates the data in an easy to use class.Future Apple Osx: Future Apple Osx, Is a free operating system to use. It was built from the ground up with the help of Cosmos. It is free to use and download. So please check it out today.Glimpse: Glimpse is a web debugger and diagnostics tool for ASP.NET and ASP.NET MVC. You can find out more at getGlimpse.comiAdm: ?? iToday ??? wince 6 R2 ?????ImagineCup Worldwide Finals Tracker: An open-source Windows Phone application that is used to track the events going on at the ImagineCup Worldwide Finals.John Owl: John OwlLAM - Local Area Messaging: A VB.NET local area chat application. Finds the lan clients and communicates through the lan with old Ms-Winsock Interop.MessyBrain: Organize your tasks in an efficient way. Assign tasks to members of your team. Create workflows for your team. Written in C# and ASP.NET MVC. Why did I start this project? Making mistakes is part of the learning process. They can be painful especially when they are made at work; there’s a cost attached to it. Why not start a project on my own? Mistakes will be less painful (only my ego will be damaged), I learn something new and there isn’t a cost attached to it. I can share the code ...Navigation Light Toolkit: Navigation Light add support for View Navigation in WPF and SilverlightRight Click Calculator: a mini calculator with numpad that opens in a dialogbox. it can combined with a textbox. bir textbox üzerinde sag tus ile açabileceginiz ufak bir hesap makinesi örnegi.Shaaps & Ladders: It's a modern software implementation of the popular classic board game Snakes & Ladders. The Bengali translation of "Snakes" pronounces "Shaaps" and thus the name of the game is such. The game is being developed on top of the Shaaps & Ladders GDK. Source for both are released.SharePoint PowerShell Scripts: Usefull PowerShell scripts written for SharePoint that helps organizations with governance.Smith Web Tools: Smith Web Tools are some useful controls to help to build web application. They are written in pure JavaScript and CSS without introducing any other JavaScript framework. At present, the Smith Calendar, Smith Editor, and Smith Dialog are available.SSAS Query Log Decoder & Analyzer: The Crisp description for the project will be "CUBE FOR CUBE". This is an end-to-end BI solution for analyzing the Query log created by SSAS Server. The Query Log data is loaded into a dimensional model and a cube is built on top of it for analysis of cube usage.takcandmansys: takcandmansysTestHG1: TestHG1TESTProjHG: TESTProjHGTestTFS1: TestTFS1TESTTFSAAA: TESTTFSAAATower: tower showTransit Feed Generator: Library for help the integration with Google Transit. This library generates the zipped file with data for Google Transit Feed, in the GTFS formatVRE Collaborator Search Kit for SharePoint 2010: VRE Collaborator Search Kit for SharePoint 2010VRE Content Archiving Kit for SharePoint 2010: VRE Content Archiving Kit for SharePoint 2010VRE Document Review Workflow Kit for SharePoint 2010: VRE Document Review Workflow Kit for SharePoint 2010 VRE Literature Review Kit for SharePoint 2010: VRE Literature Review Kit for SharePoint 2010 VRE Researcher and Project Templates for SharePoint 2010: VRE Researcher and Project Templates for SharePoint 2010 VRE RSS Feeds Kit for SharePoint 2010: VRE RSS Feeds Kit for SharePoint 2010 VRE User Administration (FBA) Kit for SharePoint 2010: VRE User Administration (FBA) Kit for SharePoint 2010 WebPart Collapser: WebPart Collapser is a lightweight, customizable jQuery plugin for SharePoint 2007 that allows visitors to expand/collapse WebParts. Through the use of cookies, the collapsed state of any webparts will be saved and collapsed each time a user visits a page. WPF Hex Editor: hex editor which is created with WPF with a xaml designed UI.Xoorscript: A proprietary scripting language created by Jared Thomson for the purpose of script defining an easy to use make system. The plans for this project are minimal for now, but if things go well I may expand it. This is low priority for me.

Read the article

Cisco 881 losing NAT NVI translation config after reload

- by MasterRoot24

This is a weird one, so I'll try to explain in as much detail as I can so I'm giving the whole picture. As I've mentioned in my other questions, I'm in the process of setting up a new Cisco 881 as my WAN router and NAT firewall. I'm facing an issue where NAT NVI rules that I have configured are not enabled after a reload of the router, regardless of the fact that they are present in the startup-config. In order to clarify this a little, here's the relevant section of my current running-config: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 ...and here's the mappings 'in action': Router1#show ip nat nvi translations | include --- tcp <WAN IP>:25 192.168.1.x:25 --- --- tcp <WAN IP>:80 192.168.1.x:80 --- --- tcp <WAN IP>:143 192.168.1.x:143 --- --- tcp <WAN IP>:443 192.168.1.x:443 --- --- tcp <WAN IP>:587 192.168.1.x:587 --- --- tcp <WAN IP>:993 192.168.1.x:993 --- --- tcp <WAN IP>:1723 192.168.1.x:1723 --- --- ...and here's proof that the mappings are saved to startup-config: Router1#show startup-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 However, look what happens after a reload of the router: Router1#reload Proceed with reload? [confirm]Connection to router closed by remote host. Connection to router closed. $ ssh joe@router Password: Authorized Access only Router1>en Password: Router1#show ip nat nvi translations | include --- Router1# Router1#show ip nat translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Here's proof that the running config should have the mappings setup as NVI: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 At this point, the mappings are not working (inbound connections from WAN on the HTTP/IMAP fail). I presume that this is because my interfaces are using ip nat enable for use with NVI mappings, instead of ip nat inside/outside. So, I re-apply the mappings: Router1#configure ter Router1#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router1(config)#ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 Router1(config)#ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 Router1(config)#ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 Router1(config)#ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 Router1(config)#ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 Router1(config)#ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 Router1(config)#ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 Router1(config)#end ... then they show up correctly: Router1#show ip nat nvi translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Router1#show ip nat translations | include --- Router1# ... furthermore, now from both WAN and LAN, the services mapped above now work until the next reload. All of the above is required every time I have to reload the router (which is all too often at the moment :-( ). Here's my full current config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip access-group 101 in ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 access-list 101 permit udp 193.x.x.0 0.0.0.255 any eq 5060 access-list 101 deny udp any any eq 5060 access-list 101 permit ip any any ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end I'd appreciate it greatly if anyone can help me find out why these mappings are not setup correctly using the saved config after a reload.

Read the article

CodePlex Daily Summary for Monday, December 13, 2010

CodePlex Daily Summary for Monday, December 13, 2010Popular ReleasesRequest Tracker Data Access: 1.0.0.0: First releaseMicrosoft All-In-One Code Framework: All-In-One Code Framework 2010-12-13: Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for ASP.NET Name Description Owner CSASPNETCMD Run batch/cmd from ASP.NET (C#) YiXiang VBASPNETCMD Run batch/cmd from ASP.NET (VB) YiXiang VBASPNETAJAXWebChat Ajax web chat application (VB) JerryWeng CSASPNETAJAXWebChat Ajax web chat application (C#) JerryWeng CSASPNETCurrentOnlineUserList Get current online u...Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...WPF Multiple Document Interface (MDI): Beta Release v1.1: WPF.MDI is a library to imitate the traditional Windows Forms Multiple Document Interface (MDI) features in WPF. This is Beta release, means there's still work to do. Please provide feedback, so next release will be better. Features: Position dependency property MdiLayout dependency property Menu dependency property Ctrl + F4, Ctrl + Tab shortcuts should work Behavior: don’t allow negative values for MdiChild position minimized windows: remember position, tile multiple windows, ...SQL Server PowerShell Extensions: 2.3.1 Production: Release 2.3.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 12 modules with 155 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.EnhSim: EnhSim 2.2.1 ALPHA: 2.2.1 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated th...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework（??） 2010?12??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, WinForm, Silverlight????12?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????DNN Simple Article: DNNSimpleArticle Module V00.00.03: The initial release of the DNNSimpleArticle module (labelled V00.00.03) There are C# and VB versions of this module for this initial release. No promises that going forward there will be packages for both languages provided for future releases. This module provides the following functionality Create and display articles Display a paged list of articles Articles get created as DNN ContentItems Categorization provided through DNN Taxonomy SEO functionality for article display providi...UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).TweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...New Projects.NET Tips Repository: This project is the source code repository for all the projects, samples, and tutorials posted at vahidnasiri.blogspot.com. Its main focus is on .NET programming.a hash implement by basic array and link list: a hash implement by basic array and link listApplication Essentials for WPF, Silverlight, and Windows Phone 7: Application essentials is a simplified, small footprint redux of the Structured MVVM and Color Blending projects and is used to build WPF, Silverlight, and Windows Phone 7 applications with an MVVM architecture.Bit.ly Button: Bit.ly Button lets you use the power of Bit.ly bookmarklet to shorten any webpage (especially on sites like Facebook and Twitter). It's like a sharing button, except it will shorten the link before you share on Facebook or Twitter.Check Dependency: Check Dependency is designed to identify the dependency problems in assemblies. It is a valuable assistant to a project hat has complex dependency in many assemblies.Circo: A product oriented towards the need of having a powerful tool improving the construction process of applications. User interface for creating Entity Dictionary, generating .Net classes and also SQL model. It provides a strong productivity oriented.CoralCubeDB: This is the db for coralcube.Dotnet.Samples: Microsoft® .NET™ sample projects Created by Nano Taboada under a MIT License All projects have been coded using Microsoft(R) Visual Studio(R) 2010 mostly targeting framework version 4.0 Get a free copy of Visual C# 2010 Express at http://tinyurl.com/visualstudio2010expressElasticity: An library implementation of the Scheduler-Agent-Supervisor pattern. http://vasters.com/clemensv/2010/09/28/Cloud+Architecture+The+SchedulerAgentSupervisor+Pattern.aspxFacebook Graph Toolkit: get Graph API in ASP.NET.Grabbers: An object relational library and code generator designed to assist agile development teams generate data aware objects. InSimSniffer: InSimSniffer is a InSim packet sniffer for the racing simulator Live for Speed. It allows programmers to view and debug packets sent by the game.Irrlicht Wrapper for D: A D wrapper for the Irrlicht game engine generated by SWIG.Linq to LDAP: Linq provider built on top of System.DirectoryServices.Protocols for querying LDAP servers.ME Video Player: ME Video Player makes it easier for web developers to present medis on web pages. It's developed in C# and Silverlight by Mahyar Esteki.Mladi.com.hr: CMS system for croatian youth portalMouse Practise: A small project that creates a game to train a beginner to use mouse. Developer's Blog : http://shekhar-pro.blogspot.com Follow on Twitter : http://twitter.com/samajshekharMVVMKit: MVVMKit makes it easier to create WPF applications using the MVVM pattern.mygully-searcher: MyGully-Searcher makes it easier for Mygully-Forum-Users to search the forums for downloads. You'll no longer have to click to all forums. It's developed in VB.Net.NBooks Accounting: A simple clone to Quickbooks.Projeto Teste do curso de Pós graduação em Engenharia de Software.: Projeto teste do curso de pós graduação em Engenharia de Software. Códigos exemplos em Javascript e outros. Nayanne Araújo Bonifácio.Razor Reports - a Visualizer for the DotNetNuke Reports Module: Razor Reports is a Visualizer for the DotNetNuke Reports ModuleSiteGrabber: Groepsopdracht 2Supermarket: Hat: tTheSharePage: Project contains the core library for use in my website that i am developing for my NIIT project work. (The website will integrate facebook and twitter in a single website) The library features full custom developed facebook and twitter sdk library that can even be reused.Tip Of Day SharePoint WebPart: Tip Of Day webpartTranslit Hebrew to Russian: Application, which can translit Hebrew text into Russian.WP7 Thai Text Input: WP7 Thai text input makes it possible to enter Thai characters in WP7. It's developed in C# and were used in some of the CoreSharp's WP7 apps.

Read the article

CodePlex Daily Summary for Wednesday, June 02, 2010

CodePlex Daily Summary for Wednesday, June 02, 2010New ProjectsBackupCleaner.Net: A C#.Net-based tool for automatically removing old backups selectively. It can be used when you already make daily backups on disk, and want to cle...C# Dotnetnuke Module development Template for Visual Studio 2010: C# DNN Module Development template for Visual Studio 2010 Get a head-start on DNN Module development. Whether you're a pro or just starting with D...Christoc's DotNetNuke C# Module Development Template: A quick and easy to use C# Module development template for DotNetNuke 5, Visual Studio 2008.Client per la digitalizzazione di documenti integrato con DotNetNuke: Questo applicativo in ambiente windows 32bit consente di digitalizzare documenti con piu scanner contemporaneamente, processare OCR in 17 Lingue (p...ContainerOne - C# application server: An application server completely written in c# (.net 4.0).Drop7 Silverlight: It's a clone of the original Drop7 written in Silverlight (C#). Echo.Net: Echo.Net is an embedded task manager for web and windows apps. It allows for simple management of background tasks at specific times. It's develope...energy: Smartgrid Demand Response ImplementationGenerate Twitter Message for Live Writer: This is a plug-in for Windows Live Writer that generates a twitter message with your blog post name and a TinyUrl link to the blog post. It will d...HomingCMS.Net: A lightweight cms.Information Système & Shell à distance: Un web service qui permet d'avoir des informations sur le système et de lancer de commande (terminal) à distance.Javascript And Jquery: gqq's javascript and jquery examplesMemory++: "Tweak the memory to speed up your computer" Memory ++ is basically an application that will speed up your computer ensuring comfort in their norma...Microformat Parsers for .NET: Microformat's Parsers for .NET helps you to collect information you run into on the web, that is stored by means of microformats. It's written in C...MoneyManager: Trying to make Personal Finances management System for my needs. Microsoft stopped to support MSMoney - it makes me so sad, so I wanna to make my ...Open source software for running a financial markets trading business: The core conceptual model will support running a business in the financial markets, for example running a trading exchange business.Ovik: Open Video Converter with simple and intuitive interface for converting video files to the open formats.Oxygen Smil Player: The <project name> is a open a-smil player implementation that is meaned to be connected to a Digital Signage CMS like Oxygen media platform ( www....Protect The Carrot: Protect The Carrot is a small fastpaced XNA game. You are a farmer whose single carrot is under attack by ravenous rabbits. You have to shoot the r...Race Day Commander: The core project is designed to support coaches of "long distance" or "endurance" sporting events coach their athletes during a race. The idea bein...Raygun Diplomacy: Raygun Diplomacy is an action shooter sandbox game set in a futuristic world. It will use procedural generation for the world, weapons, and vehicle...Resx-Translator-Bot: Resx-Translator-Bot uses Google Tanslate to automatically translate the .resx-files in your .NET and ASP.NET applications.Sistema de Expedición del Permiso Único de Siembra: Sistema de Expedición del Permiso Único de Siembra.SiteOA: 一个基于asp.net mvc2的OAStraighce: This is a low-featured, cyclic (log files reside in appname\1.txt to at mose 31.txt), thread-safe and non-blocking TraceListener with some extensio...Touch Mice: Touch Mice turns multiple mice on a computer into individual touch devices. This allows you to create multi-touch applications using the new touch...TStringValidator: A project helper to validate strings. Use this class to hold your regex strings for use with any project's string validation.Ultimate Dotnetnuke Skin Object: Ultimate Skin Object is a Dotnetnuke 5.4.2+ extension that will allow you to easily change your skins doc type, remove unneeded css files, inject e...Ventosus: Ventosus is an upcoming partially text-based game. No further information is available at this time.vit: vit based on asp.net mvcW7 Auto Playlist Generator: Purpose: This application is designed to create W7MC playlist automatically whenever you want. You can select if you want the playlist sorted Alpha...W7 Video Playlist Creator: Purpose: This program allows you to quickly create wvx video play list for Windows Media Center. This functionality is not included in WMC and is u...New ReleasesBCryptTool: BCryptTool v0.2.1: The Microsoft .NET Framework 4.0 is needed to run this program.BFBC2 PRoCon: PRoCon 0.5.2.0: Notes available on phogue.netC# Dotnetnuke Module development Template for Visual Studio 2010: DNNModule 1.0: This is the initial release of DNNModule as was available for download from http://www.subodh.com/Projects/DNNModule In this release: Contains one...Client per la digitalizzazione di documenti integrato con DotNetNuke: Versione 3.0.1: Versione 3.0.1CommonLibrary.NET: CommonLibrary.NET 0.9.4 - Final Release: A collection of very reusable code and components in C# 3.5 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars,...Community Forums NNTP bridge: Community Forums NNTP Bridge V20: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Community Forums NNTP bridge: Community Forums NNTP Bridge V21: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...DirectQ: Release 1.8.4: Significant bug fixes and improvments over 1.8.3c; there may be some bugs that I haven't caught here as development became a little disjointed towa...DotNetNuke 5 Thai Language Pack: 1.0.1: Fixed Installation Problem. Version 1.0 -> 1.0.1 Type : Character encoding. Change : ().dnn description file to "ไทย (ไทย)".dnnEcho.Net: Echo.Net 1.0: Initial release of Echo.Net.Extend SmallBasic: Teaching Extensions v.018: ShapeMaker, Program Window, Timer, and many threading errors fixedExtend SmallBasic: Teaching Extensions v.019: Added Rectangles to shapemaker, and the bubble quizGenerate Twitter Message for Live Writer: Final Source Code Plus Binaries: Compete C# source code available below. I have also included the binary for those that just want to run it.GoogleMap Control: GoogleMap Control 4.5: Map and map events are only functional. New state, persistence and event implementation in progress. Javascript classes are implemented as MS AJAX ...Industrial Dashboard: ID 3.1: -Added new widget IndustrialSlickGrid. -Added example with IndustrialChart.LongBar: LongBar 2.1 Build 310: - Library: Double-clicking on tile will install it - Feedback: Now you can type your e-mail and comment for errorMavention: Mavention Insert Lorem ipsum: A Sandbox Solution for SharePoint 2010 that allows you to easily insert Lorem ipsum text into RTE. More information and screenshots available @ htt...Memory++: Memory ++: Tweak the memory to speed up your computer Memory is basically an application that will speed up your computer ensuring comfort in their normal ac...MyVocabulary: Version 2.0: Improvements over version 1.0: Several bug fixes New shortcuts added to increase usability A new section for testing verbs was addednopCommerce. Open Source online shop e-commerce solution.: nopCommerce 1.60: You can also install nopCommerce using the Microsoft Web Platform Installer. Simply click the button below: nopCommerce To see the full list of f...Nuntio Content: Nuntio Content 4.2.1: Patch release that fixes a couple of minor issues with version numbers and priority settings for role content. The release one package for DNN 4 an...Ovik: Ovik v0.0.1 (Preview Release): This is a very early preview release of Ovik. It contains only the pure processes of selecting files and launching a conversion process. Preview r...PHPExcel: PHPExcel 1.7.3c Production: This is a patch release for 26477. Want to contribute?Please refer the Contribute page. DonationsDonate via PayPal. If you want to, we can also a...PowerShell Admin Modules: PAM 0.2: Version 0.2 contains the PAMShare module with Get-Share Get-ShareAccessMask Get-ShareSecurity New-Share Remove-Share Set-Share and the PAMath modu...Professional MRDS: RDS 2008 R3 Release: This is an updated version of the code to work with RDS 2008 R3 (version 2.2.76.0). IMPORTANT NOTE These samples are supplied as a ZIP file. Unzip...Protect The Carrot: First release: We provide two ways to install the game. The first is PTC 1.0.0.0 Zip which contains a Click-Once installer (the DVD type since codeplex does not...PST File Format SDK: PST File Format SDK v0.2.0: Updated version of pstsdk with several bug fixes, including: Improved compiler support (several changes, including two patches from hub) Fixed Do...Race Day Commander: Race Day Commander v1: First release. The exact code that was written on the day in 6 hours.Resx-Translator-Bot: Release 1.0: Initial releaseSalient.StackApps: JavaScript API Wrapper beta 2: This is the first draft of the generated JS wrapper. Added basic test coverage for each route that can also serve as basic usage examples. More i...SharePoint 2010 PowerShell Scripts & Utilities: PSSP2010 Utils 0.2: Added Install-SPIFilter script cmdlet More information can be found at http://www.ravichaganti.com/blog/?p=1439SharePoint Tools from China Community: ECB菜单控制器: ECB菜单控制器Shopping Cart .NET: 1.5: Shopping Cart .NET 1.5 has received an upgrade to .NET 4.0 along with SQL Server 2005/8. There is a new AJAX Based inventory system that helps you ...sMODfix: sMODfix v1.0b: Added: provisional support for ecm_v54 Added: provisional support for gfx_v88SNCFT Gadget: SNCFT gadget v1: cette version est la version 1 de ma gadgetSnippet Designer: Snippet Designer 1.3: Change logChanges for Visual Studio 2010Fixed bug where "Export as Snippet" was failing in a website project Changed Snippet Explorer search to u...sNPCedit: sNPCedit v0.9b: + Fixed: structure of resources + Changed: some labels in GUISoftware Is Hardwork: Sw. Is Hw. Lib. 3.0.0.x+05: Sw. Is Hw. Lib. 3.0.0.x+05SQL Server PowerShell Extensions: 2.2.3 Beta: Release 2.2 re-implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 9 modules with 133 advanced functions, 2 cmdlets and 7 scri...StackOverflow.Net: Preview Beta: Goes with the Stack Apps API version 0.8Ultimate Dotnetnuke Skin Object: Ultimate Skin Object V1.00.00: Ultimate Skin Object is a Dotnetnuke 5.4.2+ extension that will allow you to easily change your skins doc type, remove unneeded css files, inject e...VCC: Latest build, v2.1.30601.0: Automatic drop of latest buildVelocity Shop: JUNE 2010: Source code aligned to .NET Framework 4.0, ASP.NET 4.0 and Windows Server AppFabric Caching RC.ViperWorks Ignition: ViperWorks_5.0.1005.31: ViperWorks Ignition Source, version 5.0.1005.31.Visual Studio 2010 and Team Foundation Server 2010 VM Factory: Session Recordings: This release contains the "raw" and undedited session recordings and slides delivered by the team. 2010-06-01 Create package and add two session r...W7 Auto Playlist Generator: Source Code plus Binaries: Compete C# and WinForm source code available below. I have also included the binary for those that just want to run it.W7 Video Playlist Creator: Source Code plus Binaries: Compete C# and WPF source code available below. I have also included the binary for those that just want to run it.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesASP.NETMost Active ProjectsCommunity Forums NNTP bridgepatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationBlogEngine.NETIonics Isapi Rewrite FilterMirror Testing SystemRawrCaliburn: An Application Framework for WPF and SilverlightPHPExcelCustomer Portal Accelerator for Microsoft Dynamics CRM

Read the article

Dynamic XAP loading in Task-It - Part 1

Download Source Code NOTE 1: The source code provided is running against the RC versions of Silverlight 4 and VisualStudio 2010, so you will need to update to those bits to run it. NOTE 2: After downloading the source, be sure to set the .Web project as the StartUp Project, and Default.aspx as the Start Page In my MEF into post, MEF to the rescue in Task-It, I outlined a couple of issues I was facing and explained why I chose MEF (the Managed Extensibility Framework) to solve these issues. Other posts to check out There are a few other resources out there around dynamic XAP loading that you may want to review (by the way, Glenn Block is the main dude when it comes to MEF): Glenn Blocks 3-part series on a dynamically loaded dashboard Glenn and John Papas Silverlight TV video on dynamic xap loading These provide some great info, but didnt exactly cover the scenario I wanted to achieve in Task-Itand that is dynamically loading each of the apps pages the first time the user enters a page. The code In the code I provided for download above, I created a simple solution that shows the technique I used for dynamic XAP loading in Task-It, but without all of the other code that surrounds it. Taking all that other stuff away should make it easier to grasp. Having said that, there is still a fair amount of code involved. I am always looking for ways to make things simpler, and to achieve the desired result with as little code as possible, so if I find a better/simpler way I will blog about it, but for now this technique works for me. When I created this solution I started by creating a new Silverlight Navigation Application called DynamicXAP Loading. I then added the following line to my UriMappings in MainPage.xaml: <uriMapper:UriMapping Uri="/{assemblyName};component/{path}" MappedUri="/{assemblyName};component/{path}"/> In the section of MainPage.xaml that produces the page links in the upper right, I kept the Home link, but added a couple of new ones (page1 and page 2). These are the pages that will be dynamically (lazy) loaded: <StackPanel x:Name="LinksStackPanel" Style="{StaticResource LinksStackPanelStyle}"> <HyperlinkButton Style="{StaticResource LinkStyle}" NavigateUri="/Home" TargetName="ContentFrame" Content="home"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 1" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage1}"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 2" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage2}"/> </StackPanel> In App.xaml.cs I added a bit of MEF code. In Application_Startup I call a method called InitializeContainer, which creates a PackageCatalog (a MEF thing), then I create a CompositionContainer and pass it to the CompositionHost.Initialize method. This is boiler-plate MEF stuff that allows you to do 'composition' and import 'packages'. You're welcome to do a bit more MEF research on what is happening here if you'd like, but for the purpose of this example you can just trust that it works. :-) private void Application_Startup(object sender, StartupEventArgs e) { InitializeContainer(); this.RootVisual = new MainPage(); } private static void InitializeContainer() { var catalog = new PackageCatalog(); catalog.AddPackage(Package.Current); var container = new CompositionContainer(catalog); container.ComposeExportedValue(catalog); CompositionHost.Initialize(container); } Infrastructure In the sample code you'll notice that there is a project in the solution called DynamicXAPLoading.Infrastructure. This is simply a Silverlight Class Library project that I created just to move stuff I considered application 'infrastructure' code into a separate place, rather than cluttering the main Silverlight project (DynamicXapLoading). I did this same thing in Task-It, as the amount of this type of code was starting to clutter up the Silverlight project, and it just seemed to make sense to move things like Enums, Constants and the like off to a separate place. In the DynamicXapLoading.Infrastructure project you'll see 3 classes: Enums - There is only one enum in here called ModuleEnum. We'll use these later. PageMetadata - We will use this class later to add metadata to a new dynamically loaded project. ViewModelBase - This is simply a base class for view models that we will use in this, as well as future samples. As mentioned in my MVVM post, I will be using the MVVM pattern throughout my code for reasons detailed in the post. By the way, the ViewModelExtension class in there allows me to do strongly-typed property changed notification, so rather than OnPropertyChanged("MyProperty"), I can do this.OnPropertyChanged(p => p.MyProperty). It's just a less error-prown approach, because if you don't spell "MyProperty" correctly using the first method, nothing will break, it just won't work. Adding a new page We currently have a couple of pages that are being dynamically (lazy) loaded, but now let's add a third page. 1. First, create a new Silverlight Application project: In this example I call it Page3. In the future you may prefer to use a different name, like DynamicXAPLoading.Page3, or even DynamicXAPLoading.Modules.Page3. It can be whatever you want. In my Task-It application I used the latter approach (with 'Modules' in the name). I do think of these application as 'modules', but Prism uses the same term, so some folks may not like that. Use whichever naming convention you feel is appropriate, but for now Page3 will do. When you change the name to Page3 and click OK, you will be presented with the Add New Project dialog: It is important that you leave the 'Host the Silverlight application in a new or existing Web site in the solution' checked, and the .Web project will be selected in the dropdown below. This will create the .xap file for this project under ClientBin in the .Web project, which is where we want it. 2. Uncheck the 'Add a test page that references the application' checkbox, and leave everything else as is. 3. Once the project is created, you can delete App.xaml and MainPage.xaml. 4. You will need to add references your new project to the following: DynamicXAPLoading.Infrastructure.dll (this is a Project reference) DynamicNavigation.dll (this is in the Libs directory under the DynamicXAPLoading project) System.ComponentModel.Composition.dll System.ComponentModel.Composition.Initialization.dll System.Windows.Controls.Navigation.dll If you have installed the latest RC bits you will find the last 3 dll's under the .NET tab in the Add Referenced dialog. They live in the following location, or if you are on a 64-bit machine like me, it will be Program Files (x86). C:\Program Files\Microsoft SDKs\Silverlight\v4.0\Libraries\Client Now let's create some UI for our new project. 5. First, create a new Silverlight User Control called Page3.dyn.xaml 6. Paste the following code into the xaml: <dyn:DynamicPageShim xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:dyn="clr-namespace:DynamicNavigation;assembly=DynamicNavigation" xmlns:my="clr-namespace:Page3;assembly=Page3"> <my:Page3Host /> </dyn:DynamicPageShim> This is just a 'shim', part of David Poll's technique for dynamic loading. 7. Expand the icon next to Page3.dyn.xaml and delete the code-behind file (Page3.dyn.xaml.cs). 8. Next we will create a control that will 'host' our page. Create another Silverlight User Control called Page3Host.xaml and paste in the following XAML: <dyn:DynamicPage x:Class="Page3.Page3Host" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:dyn="clr-namespace:DynamicNavigation;assembly=DynamicNavigation" xmlns:Views="clr-namespace:Page3.Views" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400" Title="Page 3"> <Views:Page3/> </dyn:DynamicPage> 9. Now paste the following code into the code-behind for this control: using DynamicXAPLoading.Infrastructure; namespace Page3 { [PageMetadata(NavigateUri = "/Page3;component/Page3.dyn.xaml", Module = Enums.Page3)] public partial class Page3Host { public Page3Host() { InitializeComponent(); } } } Notice that we are now using that PageMetadata custom attribute class that we created in the Infrastructure project, and setting its two properties. NavigateUri - This tells it that the assembly is called Page3 (with a slash beforehand), and the page we want to load is Page3.dyn.xaml...our 'shim'. That line we added to the UriMapper in MainPage.xaml will use this information to load the page. Module - This goes back to that ModuleEnum class in our Infrastructure project. However, setting the Module to ModuleEnum.Page3 will cause a compilation error, so... 10. Go back to that Enums.cs under the Infrastructure project and add a 3rd entry for Page3: public enum ModuleEnum { Page1, Page2, Page3 } 11. Now right-click on the Page3 project and add a folder called Views. 12. Right-click on the Views folder and create a new Silverlight User Control called Page3.xaml. We won't bother creating a view model for this User Control as I did in the Page 1 and Page 2 projects, just for the sake of simplicity. Feel free to add one if you'd like though, and copy the code from one of those other projects. Right now those view models aren't really doing anything anyway...though they will in my next post. :-) 13. Now let's replace the xaml for Page3.xaml with the following: <dyn:DynamicPage x:Class="Page3.Views.Page3" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:dyn="clr-namespace:DynamicNavigation;assembly=DynamicNavigation" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400" Style="{StaticResource PageStyle}"> <Grid x:Name="LayoutRoot"> <ScrollViewer x:Name="PageScrollViewer" Style="{StaticResource PageScrollViewerStyle}"> <StackPanel x:Name="ContentStackPanel"> <TextBlock x:Name="HeaderText" Style="{StaticResource HeaderTextStyle}" Text="Page 3"/> <TextBlock x:Name="ContentText" Style="{StaticResource ContentTextStyle}" Text="Page 3 content"/> </StackPanel> </ScrollViewer> </Grid> </dyn:DynamicPage> 14. And in the code-behind remove the inheritance from UserControl, so it should look like this: namespace Page3.Views { public partial class Page3 { public Page3() { InitializeComponent(); } } } One thing you may have noticed is that the base class for the last two User Controls we created is DynamicPage. Once again, we are using the infrastructure that David Poll created. 15. OK, a few last things. We need a link on our main page so that we can access our new page. In MainPage.xaml let's update our links to look like this: <StackPanel x:Name="LinksStackPanel" Style="{StaticResource LinksStackPanelStyle}"> <HyperlinkButton Style="{StaticResource LinkStyle}" NavigateUri="/Home" TargetName="ContentFrame" Content="home"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 1" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage1}"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 2" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage2}"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 3" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage3}"/> </StackPanel> 16. Next, we need to add the following at the bottom of MainPageViewModel in the ViewModels directory of our DynamicXAPLoading project: public ModuleEnum ModulePage3 { get { return ModuleEnum.Page3; } } 17. And at last, we need to add a case for our new page to the switch statement in MainPageViewModel: switch (module) { case ModuleEnum.Page1: DownloadPackage("Page1.xap"); break; case ModuleEnum.Page2: DownloadPackage("Page2.xap"); break; case ModuleEnum.Page3: DownloadPackage("Page3.xap"); break; default: break; } Now fire up the application and click the page 1, page 2 and page 3 links. What you'll notice is that there is a 2-second delay the first time you hit each page. That is because I added the following line to the Navigate method in MainPageViewModel: Thread.Sleep(2000); // Simulate a 2 second initial loading delay The reason I put this in there is that I wanted to simulate a delay the first time the page loads (as the .xap is being downloaded from the server). You'll notice that after the first hit to the page though that there is no delay...that's because the .xap has already been downloaded. Feel free to comment out this 2-second delay, or remove it if you'd like. I just wanted to show how subsequent hits to the page would be quicker than the initial one. By the way, you may want to display some sort of BusyIndicator while the .xap is loading. I have that in my Task-It appplication, but for the sake of simplicity I did not include it here. In the future I'll blog about how I show and hide the BusyIndicator using events (I'm currently using the eventing framework in Prism for that, but may move to the one in the MVVM Light Toolkit some time soon). Whew, that felt like a lot of steps, but it does work quite nicely. As I mentioned earlier, I'll try to find ways to simplify the code (I'd like to get away from having things like hard-coded .xap file names) and will blog about it in the future if I find a better way. In my next post, I'll talk more about what is actually happening with the code that makes this all work.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

EM12c Release 4: New Compliance features including DB STIG Standard

- by DaveWolf

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Enterprise Manager’s compliance framework is a powerful and robust feature that provides users the ability to continuously validate their target configurations against a specified standard. Enterprise Manager’s compliance library is filled with a wide variety of standards based on Oracle’s recommendations, best practices and security guidelines. These standards can be easily associated to a target to generate a report showing its degree of conformance to that standard. ( To get an overview of Database compliance management in Enterprise Manager see this screenwatch. ) Starting with release 12.1.0.4 of Enterprise Manager the compliance library will contain a new standard based on the US Defense Information Systems Agency (DISA) Security Technical Implementation Guide (STIG) for Oracle Database 11g. According to the DISA website, “The STIGs contain technical guidance to ‘lock down’ information systems/software that might otherwise be vulnerable to a malicious computer attack.” In essence, a STIG is a technical checklist an administrator can follow to secure a system or software. Many US government entities are required to follow these standards however many non-US government entities and commercial companies base their standards directly or partially on these STIGs. You can find more information about the Oracle Database and other STIGs on the DISA website. The Oracle Database 11g STIG consists of two categories of checks, installation and instance. Installation checks focus primarily on the security of the Oracle Home while the instance checks focus on the configuration of the running database instance itself. If you view the STIG compliance standard in Enterprise Manager, you will see the rules organized into folders corresponding to these categories. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The rule names contain a rule ID ( DG0020 for example ) which directly map to the check name in the STIG checklist along with a helpful brief description. The actual description field contains the text from the STIG documentation to aid in understanding the purpose of the check. All of the rules have also been documented in the Oracle Database Compliance Standards reference documentation. In order to use this standard both the OMS and agent must be at version 12.1.0.4 as it takes advantage of several features new in this release including: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Agent-Side Compliance Rules Manual Compliance Rules Violation Suppression Additional BI Publisher Compliance Reports /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Agent-Side Compliance Rules Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Agent-side compliance rules are essentially the result of a tighter integration between Configuration Extensions and Compliance Rules. If you ever created customer compliance content in past versions of Enterprise Manager, you likely used Configuration Extensions to collect additional information into the EM repository so it could be used in a Repository compliance rule. This process although powerful, could be confusing to correctly model the SQL in the rule creation wizard. With agent-side rules, the user only needs to choose the Configuration Extension/Alias combination and that’s it. Enterprise Manager will do the rest for you. This tighter integration also means their lifecycle is managed together. When you associate an agent-side compliance standard to a target, the required Configuration Extensions will be deployed automatically for you. The opposite is also true, when you unassociated the compliance standard, the Configuration Extensions will also be undeployed. The Oracle Database STIG compliance standard is implemented as an agent-side standard which is why you simply need to associate the standard to your database targets without previously deploying the associated Configuration Extensions. You can learn more about using Agent-Side compliance rules in the screenwatch Using Agent-Side Compliance Rules on Enterprise Manager's Lifecycle Management page on OTN. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Manual Compliance Rules Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} There are many checks in the Oracle Database STIG as well as other common standards which simply cannot be automated. This could be something as simple as “Ensure the datacenter entrance is secured.” or complex as Oracle Database STIG Rule DG0186 – “The database should not be directly accessible from public or unauthorized networks”. These checks require a human to perform and attest to its successful completion. Enterprise Manager now supports these types of checks in Manual rules. When first associated to a target, each manual rule will generate a single violation. These violations must be manually cleared by a user who is in essence attesting to its successful completion. The user is able to permanently clear the violation or give a future date on which the violation will be regenerated. Setting a future date is useful when policy dictates a periodic re-validation of conformance wherein the user will have to reperform the check. The optional reason field gives the user an opportunity to provide details of the check results. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Violation Suppression There are situations that require the need to permanently or temporarily suppress a legitimate violation or finding. These include approved exceptions and grace periods. Enterprise Manager now supports the ability to temporarily or permanently suppress a violation. Unlike when you clear a manual rule violation, suppression simply removes the violation from the compliance results UI and in turn its negative impact on the score. The violation still remains in the EM repository and can be accounted for in compliance reports. Temporarily suppressing a violation can give users a grace period in which to address an issue. If the issue is not addressed within the specified period, the violation will reappear in the results automatically. Again the user may enter a reason for the suppression which will be permanently saved with the event along with the suppressing user ID. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Additional BI Publisher compliance reports As I am sure you have learned by now, BI Publisher now ships and is integrated with Enterprise Manager 12.1.0.4. This means users can take full advantage of the powerful reporting engine by using the Oracle provided reports or building their own. There are many new compliance related reports available in 12.1.0.4 covering all aspects including the association status, library as well as summary and detailed results reports. 10 New Compliance Reports Compliance Summary Report Example showing STIG results Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Conclusion Together with the Oracle Database 11g STIG compliance standard these features provide a complete solution for easily auditing and reporting the security posture of your Oracle Databases against this well known benchmark. You can view an overview presentation and demo in the screenwatch Using the STIG Compliance Standard on Enterprise Manager's Lifecycle Management page on OTN. Additional EM12c Compliance Management Information Compliance Management - Overview ( Presentation ) Compliance Management - Custom Compliance on Default Data (How To) Compliance Management - Custom Compliance using SQL Configuration Extension (How To) Compliance Management - Customer Compliance using Command Configuration Extension (How To)

Read the article

SOA Community Newsletter: nouvelle lettre !

- by mseika

SOA PARTNER COMMUNITY NEWSLETTERAUGUST 2012 Dear SOA partner community member Have you submitted your feedback on SOA Partner Community Survey 2012? This is the last chance to participate in the survey. We recommend you to complete the survey and help us to improve our SOA Community. Thanks to all attendees and trainers for their participation in the excellent Fusion Middleware Summer Camps held in Lisbon and Munich. I would also like to thank you for the great feedback and the nice reports provided by AMIS Technology Blog & Middleware by Link Consulting. Most of our courses have been overbooked, if you did not get a chance or missed it, we offer a wide range of online training and the course material. Key take-away from the advanced BPM course is to become an expert in ADF. Here is the course from Grant Ronald Learn Advanced ADF online available. The Link Consulting Team became experts in SOA Governance with EAMS and Oracle Enterprise Repository! We always encourage our community members to share their best practices and are very keen to publish it. Please let us know if you want to share your best practices through this medium.We encourage you to make use of the Specialization benefits - this month we are giving an opportunity to Promote Your SOA & BPM Events. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Presentations & Training material OFM Summer CampsPromote Your SOA & BPM Events Advanced ADF Online, For Free By Grant BPM 11g Customer Stories & Solution Catalog & Process Accelerators Delivering SOA Governance with EAMS by Link Consulting Team WebLogic Server Provisioning and Patching News from our Partners & CommunityUpdated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum SOA Workspace PRESENTATIONS & TRAINING MATERIAL OFM SUMMER CAMPS Thanks to all attendees who invested their time and utilized the opportunity to attend the Summer Camps! Due to high demand of our most of the trainings, we had a long waiting list with more numbers of partners who are keen to attend it. We would like to give our special thanks to all trainers, who delivered excellent workshops! Most of the presentations and course material have been posted on our SOA Community Workspaceand WebLogic Community Workspace. You can access the content only if you are a registered community member. To register for the SOA Community please click here. You can register for the WebLogic Community here. To find out the first impressions of the event please visit our Facebook pages:www.facebook.com/WebLogicCommunity &www.facebook.com/soacommunity or Picasa AlbumThanks for the excellent blog posts from AMIS Technology Blog & Middleware by Link Consulting. Let us know if you published a twitter blog on@soacommunity & @wlscommunity. We will be pleased to publish it in our Newsletters. BPM Course Quotes “Its always easy, if you know, what you are doing” - Torsten Winterberg, Opitz“ The best ideas are the ideas from the best” - Filipe Sequeria, Primesoft “Best invest in the education in the last 12 months” - Richard Schaller, IPT “Practice best practice with the best instructor” - Graham Lamond Capgemini “If you have basic BPM knowledge, this is the course to really mater it” - Diogo Henriques Link Consulting “Very good trainers lot of work. Lot of fun as well” - Matthias Gris Workflow Factory “If you like to accelerate in Oracle come to the training to bring it all together” - Marcel van der Glind, Amis ADF Course Quotes "Excellent training, great opportunity to network!" - Frank Houweling, Amis "Lots of fun and good ideas" - Ana Santiago, GFI "Learn ADF, worth it Fusion Apps is the future" - Miguel Delgadillo, STO Consulting "The best way to learn Fusion Middleware from the #1" Alexandro Montantes, STO Consulting "Be advanced to to be the first” - Dimitar Petrov Fadata "Great opportunity to suck all the knowledge out of some very experienced product managers” - Wilfred von der Deijl, The Future Group WebLogic Course Quotes “Oracle trainings are the best” - Pedro Neto Novobas“ "Excellent training, well organized” - Pedro Antunh, Capgemini “This course dives you into Oracle WebLogic giving you a quick start on benefiting from Fusion Apps” - Leonardo Fernandes, Outsystems Additional Quotes “Thanks a lot again for organizing such a great and informative Summer Camp. Both training and networking were organized very professionally. I have gained tons of very useful Info, which will definitely help to increase quality of our future projects.” - Daniel Fasko fss-group.com I didn’t get the chance yesterday to thank you for a most enjoyable and thoroughly educational time I had in Munich over the last few days.” - Jeroen Bakker Ordina “Just to congratulate you on a great event, not only today but also in the previous days of training. As we know, a very good organization and, as a native Portuguese that knows Lisbon very good, a nice choice of places to visit. Looking forward to come again next year.” Pedro Miguel Neto, Novobase PROMOTE YOUR SOA & BPM EVENTS The Partner Event Publisher has just been made available to all SOA & BPM specialized partners in EMEA. Partners now have the opportunity to publish their events to theOracle.com/events site and spread the word on their upcoming live in-person and/or live webcast events. See the demo below and click here to read more information. ADVANCED ADF ONLINE, FOR FREE BY GRANT The second part of the advanced ADF online eCourse is Live now! This covers the advanced topics of region and region interaction as well as getting down and dirty with some of the layout features of ADF Faces, skinning and DVT components. The aim of this course is to give you a self-paced learning aid which covers the more advanced topics of ADF development. The content is developed by Product Management and our Curriculum development teams and is based on advanced training material we have been running internally for about 18 months. We will get started on the next chapter, but in the meantime, please have a look at chapters one and two. Back to top BPM 11G CUSTOMER STORIES & SOLUTION CATALOG & PROCESS ACCELERATORS Stories Everyone loves a good story on planning or implementing a BPM strategy. Everyone wants to hear how it was done before?, what worked?, what was achieved? If you have achieved success with BPM, we are very keen to hear your stories and examples of how your customers use it. We receive lots of requests from people who are thinking of using BPM to solve a specific problem or in combination with a specific technology to talk to someone who has done it before. These stories are invaluable. Drop down the details of anything you think is relevant with a bit of detail and we will follow up on it. As one good deed deserves another, we will do our best to give you stories if you need them to show that where you are going, others have treaded before. Send your stories to us using this e-mail link and we will share them among other like minded people. Solution Catalogue This summer, Oracle is launching a solution catalogue specifically intended for partners. If you have delivered a successful implementation in BPM and think it could be reused and applied again in a similar scenario in the same industry or in a similar environment, then we ware keen to know about it and will add it to the solution catalogue. The solution catalogue will showcase successful BPM solutions both inside and outside Oracle. Be in touch with us on this e-mail link and we will make sure to add your solution. Process AcceleratorsFinally if you have specific processes that you are expert on, you have implemented at a customer and you want to work with us on getting these productised, then we would love to know about it. The process accelerator programme is explained in the most recent SOA/BPM Community Newsletter but again feel free to contact us if you want to get involved. Good luck with BPM and let us know how we can help. Barry O'Reilly Director BPM [email protected] DELIVERING SOA GOVERNANCE WITH EAMS BY LINK CONSULTING TEAM In the last 12 years Link Consulting has been making its presence in specific areas such as Governance and Architecture, both in terms of practices and methodologies, products, know-how and technological expertise. The Enterprise Architecture Management System - Oracle Enterprise Edition (EAMS - OER Edition) is the result of this experience and combines the architecture management solution with OER in order to deliver a product specialized for SOA Governance that gathers the better of two worlds in solution that enables SOA Governance projects, initiatives and programs. Enterprise Architecture Management System Enterprise Architecture Management System (EAMS), is an automation based solution that enables the efficient management of Enterprise Architectures. The solution uses configured enterprise repositories and takes advantages of its features to provide automation capabilities to the users. EAMS provides capabilities to create/customize/analyze repository data, architectural blueprints, reports and analytic charts. Oracle Enterprise Repository Oracle Enterprise Repository (OER) is one of the major and central elements of the Oracle SOA Governance solution. Oracle Enterprise Repository provides the tools to manage and govern the metadata for any type of software asset, from business processes and services to patterns, frameworks, applications, components, and models. OER maps the relationships and inter-dependencies that connect those assets to improve impact analysis, promote and optimize their reuse, and measure their impact on the bottom line. It provides the visibility, feedback, controls, and analytics to keep your SOA on track to deliver business value. The intense focus on automation helps to overcome barriers to SOA adoption and streamline governance throughout the lifecycle. Core capabilities of the OER include: Asset Management Asset Lifecycle Management Usage Tracking Service Discovery Version Management Dependency Analysis Portfolio Management EAMS - OER Edition The solution takes the advantages and features from both products and combines them in a symbiotic tool that enhances the quality of SOA Governance Initiatives and Programs. EAMS is able to produce a vast number of outputs by combining its analytical engine, SOA-specific configurations and the assets in OER and other related tools, catalogs and repositories. The configurations encompass not only the extendable parametrization of the metadata but also fully configurable blueprints, PowerPoint reports, charts and queries. The SOA blueprints The solution comes with a set of predefined architectural representations that help the organization better perceive their SOA landscape. More blueprints can be easily created in order to accommodate the organizations needs in terms of detail, audience and metadata. Charts & Dashboards The solution encompasses a set of predefined charts and dashboards that promote a more agile way to control and explore the assets. Time Based Visualization All representations are time bound, and with EAMS - OER you can truly govern SOA with a complete view of the Past, Present and Future; The solution delivers Gap Analysis, a project oriented approach while taking into consideration the As-Was, As-Is an To-Be. Time based visualization differentiating factors: Extensive automation and maintenance of architectural representations Organization wide solution. Easy access and navigation to and between all architectural artifacts and representations. Flexible meta-model, customization and extensibility capabilities. Lifecycle management and enforcement of the time dimension over all the repository content. Profile based customization. Comprehensive visibility Architectural alignment Friendly and striking user interfaces For more information on EAMS visit us here. For more information on SOA visit us here. WEBLOGIC SERVER PROVISIONING AND PATCHING For access to the Oracle demo systems please visit OPN and talk to your Partner Expert.SOA Suite and BPM Suite runs on WebLogic! We are pleased to announce the availability of a WebLogic Server Management demo that showcases some of the key provisioning and patching capabilities of WebLogic Server Management Pack Enterprise Edition (EE). To learn more about these features - as well as other features of the pack - please visit the pack's saleskit page.Demo Highlights The demo showcases the following capabilities: Patching Oracle WebLogic Servers Standardizing WebLogic Server Patch Rollouts Creating a WebLogic Domain Provisioning Profile Cloning a WebLogic Domain from a Provisioning Profile Deploying a Java EE Application Scaling Out an Oracle WebLogic Cluster Demo Instructions Go to the DSS website for Oracle Partners. On the Standard Demo Launchpad page, under the “Software Lifecycle Automation” section, click on the link “EM Cloud Control 12c WLS Provisioning and Patching” (tagged as “NEW”). Specific demo launchpad page contains a link to the detailed demo script with instructions on how to show the demo.

Read the article

NoSQL with MongoDB, NoRM and ASP.NET MVC - Part 2

- by shiju

In my last post, I have given an introduction to MongoDB and NoRM using an ASP.NET MVC demo app. I have updated the demo ASP.NET MVC app and a created a new drop at codeplex. You can download the demo at http://mongomvc.codeplex.com/In my last post, we have discussed to doing basic CRUD operations against a simple domain entity. In this post, let’s discuss on domain entity with deep object graph.The below is our domain entities public class Category { [MongoIdentifier] public ObjectId Id { get; set; } [Required(ErrorMessage = "Name Required")] [StringLength(25, ErrorMessage = "Must be less than 25 characters")] public string Name { get; set;} public string Description { get; set; } public List<Expense> Expenses { get; set; } public Category() { Expenses = new List<Expense>(); } } public class Expense { [MongoIdentifier] public ObjectId Id { get; set; } public Category Category { get; set; } public string Transaction { get; set; } public DateTime Date { get; set; } public double Amount { get; set; } } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category.The MongoSession class internal class MongoSession : IDisposable { private readonly MongoQueryProvider provider; public MongoSession() { this.provider = new MongoQueryProvider("Expense"); } public IQueryable<Category> Categories { get { return new MongoQuery<Category>(this.provider); } } public IQueryable<Expense> Expenses { get { return new MongoQuery<Expense>(this.provider); } } public MongoQueryProvider Provider { get { return this.provider; } } public void Add<T>(T item) where T : class, new() { this.provider.DB.GetCollection<T>().Insert(item); } public void Dispose() { this.provider.Server.Dispose(); } public void Delete<T>(T item) where T : class, new() { this.provider.DB.GetCollection<T>().Delete(item); } public void Drop<T>() { this.provider.DB.DropCollection(typeof(T).Name); } public void Save<T>(T item) where T : class,new() { this.provider.DB.GetCollection<T>().Save(item); } } ASP.NET MVC view model for Expense transaction public class ExpenseViewModel { public ObjectId Id { get; set; } public ObjectId CategoryId { get; set; } [Required(ErrorMessage = "Transaction Required")] public string Transaction { get; set; } [Required(ErrorMessage = "Date Required")] public DateTime Date { get; set; } [Required(ErrorMessage = "Amount Required")] public double Amount { get; set; } public IEnumerable<SelectListItem> Category { get; set; } } Let's create action method for Insert and Update a expense transaction [HttpPost] public ActionResult Save(ExpenseViewModel expenseViewModel) { try { if (!ModelState.IsValid) { using (var session = new MongoSession()) { var categories = session.Categories.AsEnumerable<Category>(); expenseViewModel.Category = categories.ToSelectListItems(expenseViewModel.CategoryId); } return View("Save", expenseViewModel); } var expense=new Expense(); ModelCopier.CopyModel(expenseViewModel, expense); using (var session = new MongoSession()) { ObjectId Id = expenseViewModel.CategoryId; var category = session.Categories .Where(c => c.Id ==Id ) .FirstOrDefault(); expense.Category = category; session.Save(expense); } return RedirectToAction("Index"); } catch { return View(); } } Query with Expenses using (var session = new MongoSession()) { var expenses = session.Expenses. Where(exp => exp.Date >= StartDate && exp.Date <= EndDate) .AsEnumerable<Expense>(); } We are doing a LINQ query expression with a Date filter. We can easily work with MongoDB using NoRM driver and can managing object graph of domain entities are pretty cool. Download the Source - You can download the source code form http://mongomvc.codeplex.com

Read the article

The Incremental Architect´s Napkin – #3 – Make Evolvability inevitable

- by Ralf Westphal

Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/06/04/the-incremental-architectacutes-napkin-ndash-3-ndash-make-evolvability-inevitable.aspxThe easier something to measure the more likely it will be produced. Deviations between what is and what should be can be readily detected. That´s what automated acceptance tests are for. That´s what sprint reviews in Scrum are for. It´s no small wonder our software looks like it looks. It has all the traits whose conformance with requirements can easily be measured. And it´s lacking traits which cannot easily be measured. Evolvability (or Changeability) is such a trait. If an operation is correct, if an operation if fast enough, that can be checked very easily. But whether Evolvability is high or low, that cannot be checked by taking a measure or two. Evolvability might correlate with certain traits, e.g. number of lines of code (LOC) per function or Cyclomatic Complexity or test coverage. But there is no threshold value signalling “evolvability too low”; also Evolvability is hardly tangible for the customer. Nevertheless Evolvability is of great importance - at least in the long run. You can get away without much of it for a short time. Eventually, though, it´s needed like any other requirement. Or even more. Because without Evolvability no other requirement can be implemented. Evolvability is the foundation on which all else is build. Such fundamental importance is in stark contrast with its immeasurability. To compensate this, Evolvability must be put at the very center of software development. It must become the hub around everything else revolves. Since we cannot measure Evolvability, though, we cannot start watching it more. Instead we need to establish practices to keep it high (enough) at all times. Chefs have known that for long. That´s why everybody in a restaurant kitchen is constantly seeing after cleanliness. Hygiene is important as is to have clean tools at standardized locations. Only then the health of the patrons can be guaranteed and production efficiency is constantly high. Still a kitchen´s level of cleanliness is easier to measure than software Evolvability. That´s why important practices like reviews, pair programming, or TDD are not enough, I guess. What we need to keep Evolvability in focus and high is… to continually evolve. Change must not be something to avoid but too embrace. To me that means the whole change cycle from requirement analysis to delivery needs to be gone through more often. Scrum´s sprints of 4, 2 even 1 week are too long. Kanban´s flow of user stories across is too unreliable; it takes as long as it takes. Instead we should fix the cycle time at 2 days max. I call that Spinning. No increment must take longer than from this morning until tomorrow evening to finish. Then it should be acceptance checked by the customer (or his/her representative, e.g. a Product Owner). For me there are several resasons for such a fixed and short cycle time for each increment: Clear expectations Absolute estimates (“This will take X days to complete.”) are near impossible in software development as explained previously. Too much unplanned research and engineering work lurk in every feature. And then pervasive interruptions of work by peers and management. However, the smaller the scope the better our absolute estimates become. That´s because we understand better what really are the requirements and what the solution should look like. But maybe more importantly the shorter the timespan the more we can control how we use our time. So much can happen over the course of a week and longer timespans. But if push comes to shove I can block out all distractions and interruptions for a day or possibly two. That´s why I believe we can give rough absolute estimates on 3 levels: Noon Tonight Tomorrow Think of a meeting with a Product Owner at 8:30 in the morning. If she asks you, how long it will take you to implement a user story or bug fix, you can say, “It´ll be fixed by noon.”, or you can say, “I can manage to implement it until tonight before I leave.”, or you can say, “You´ll get it by tomorrow night at latest.” Yes, I believe all else would be naive. If you´re not confident to get something done by tomorrow night (some 34h from now) you just cannot reliably commit to any timeframe. That means you should not promise anything, you should not even start working on the issue. So when estimating use these four categories: Noon, Tonight, Tomorrow, NoClue - with NoClue meaning the requirement needs to be broken down further so each aspect can be assigned to one of the first three categories. If you like absolute estimates, here you go. But don´t do deep estimates. Don´t estimate dozens of issues; don´t think ahead (“Issue A is a Tonight, then B will be a Tomorrow, after that it´s C as a Noon, finally D is a Tonight - that´s what I´ll do this week.”). Just estimate so Work-in-Progress (WIP) is 1 for everybody - plus a small number of buffer issues. To be blunt: Yes, this makes promises impossible as to what a team will deliver in terms of scope at a certain date in the future. But it will give a Product Owner a clear picture of what to pull for acceptance feedback tonight and tomorrow. Trust through reliability Our trade is lacking trust. Customers don´t trust software companies/departments much. Managers don´t trust developers much. I find that perfectly understandable in the light of what we´re trying to accomplish: delivering software in the face of uncertainty by means of material good production. Customers as well as managers still expect software development to be close to production of houses or cars. But that´s a fundamental misunderstanding. Software development ist development. It´s basically research. As software developers we´re constantly executing experiments to find out what really provides value to users. We don´t know what they need, we just have mediated hypothesises. That´s why we cannot reliably deliver on preposterous demands. So trust is out of the window in no time. If we switch to delivering in short cycles, though, we can regain trust. Because estimates - explicit or implicit - up to 32 hours at most can be satisfied. I´d say: reliability over scope. It´s more important to reliably deliver what was promised then to cover a lot of requirement area. So when in doubt promise less - but deliver without delay. Deliver on scope (Functionality and Quality); but also deliver on Evolvability, i.e. on inner quality according to accepted principles. Always. Trust will be the reward. Less complexity of communication will follow. More goodwill buffer will follow. So don´t wait for some Kanban board to show you, that flow can be improved by scheduling smaller stories. You don´t need to learn that the hard way. Just start with small batch sizes of three different sizes. Fast feedback What has been finished can be checked for acceptance. Why wait for a sprint of several weeks to end? Why let the mental model of the issue and its solution dissipate? If you get final feedback after one or two weeks, you hardly remember what you did and why you did it. Resoning becomes hard. But more importantly youo probably are not in the mood anymore to go back to something you deemed done a long time ago. It´s boring, it´s frustrating to open up that mental box again. Learning is harder the longer it takes from event to feedback. Effort can be wasted between event (finishing an issue) and feedback, because other work might go in the wrong direction based on false premises. Checking finished issues for acceptance is the most important task of a Product Owner. It´s even more important than planning new issues. Because as long as work started is not released (accepted) it´s potential waste. So before starting new work better make sure work already done has value. By putting the emphasis on acceptance rather than planning true pull is established. As long as planning and starting work is more important, it´s a push process. Accept a Noon issue on the same day before leaving. Accept a Tonight issue before leaving today or first thing tomorrow morning. Accept a Tomorrow issue tomorrow night before leaving or early the day after tomorrow. After acceptance the developer(s) can start working on the next issue. Flexibility As if reliability/trust and fast feedback for less waste weren´t enough economic incentive, there is flexibility. After each issue the Product Owner can change course. If on Monday morning feature slices A, B, C, D, E were important and A, B, C were scheduled for acceptance by Monday evening and Tuesday evening, the Product Owner can change her mind at any time. Maybe after A got accepted she asks for continuation with D. But maybe, just maybe, she has gotten a completely different idea by then. Maybe she wants work to continue on F. And after B it´s neither D nor E, but G. And after G it´s D. With Spinning every 32 hours at latest priorities can be changed. And nothing is lost. Because what got accepted is of value. It provides an incremental value to the customer/user. Or it provides internal value to the Product Owner as increased knowledge/decreased uncertainty. I find such reactivity over commitment economically very benefical. Why commit a team to some workload for several weeks? It´s unnecessary at beast, and inflexible and wasteful at worst. If we cannot promise delivery of a certain scope on a certain date - which is what customers/management usually want -, we can at least provide them with unpredecented flexibility in the face of high uncertainty. Where the path is not clear, cannot be clear, make small steps so you´re able to change your course at any time. Premature completion Customers/management are used to premeditating budgets. They want to know exactly how much to pay for a certain amount of requirements. That´s understandable. But it does not match with the nature of software development. We should know that by now. Maybe there´s somewhere in the world some team who can consistently deliver on scope, quality, and time, and budget. Great! Congratulations! I, however, haven´t seen such a team yet. Which does not mean it´s impossible, but I think it´s nothing I can recommend to strive for. Rather I´d say: Don´t try this at home. It might hurt you one way or the other. However, what we can do, is allow customers/management stop work on features at any moment. With spinning every 32 hours a feature can be declared as finished - even though it might not be completed according to initial definition. I think, progress over completion is an important offer software development can make. Why think in terms of completion beyond a promise for the next 32 hours? Isn´t it more important to constantly move forward? Step by step. We´re not running sprints, we´re not running marathons, not even ultra-marathons. We´re in the sport of running forever. That makes it futile to stare at the finishing line. The very concept of a burn-down chart is misleading (in most cases). Whoever can only think in terms of completed requirements shuts out the chance for saving money. The requirements for a features mostly are uncertain. So how does a Product Owner know in the first place, how much is needed. Maybe more than specified is needed - which gets uncovered step by step with each finished increment. Maybe less than specified is needed. After each 4–32 hour increment the Product Owner can do an experient (or invite users to an experiment) if a particular trait of the software system is already good enough. And if so, she can switch the attention to a different aspect. In the end, requirements A, B, C then could be finished just 70%, 80%, and 50%. What the heck? It´s good enough - for now. 33% money saved. Wouldn´t that be splendid? Isn´t that a stunning argument for any budget-sensitive customer? You can save money and still get what you need? Pull on practices So far, in addition to more trust, more flexibility, less money spent, Spinning led to “doing less” which also means less code which of course means higher Evolvability per se. Last but not least, though, I think Spinning´s short acceptance cycles have one more effect. They excert pull-power on all sorts of practices known for increasing Evolvability. If, for example, you believe high automated test coverage helps Evolvability by lowering the fear of inadverted damage to a code base, why isn´t 90% of the developer community practicing automated tests consistently? I think, the answer is simple: Because they can do without. Somehow they manage to do enough manual checks before their rare releases/acceptance checks to ensure good enough correctness - at least in the short term. The same goes for other practices like component orientation, continuous build/integration, code reviews etc. None of that is compelling, urgent, imperative. Something else always seems more important. So Evolvability principles and practices fall through the cracks most of the time - until a project hits a wall. Then everybody becomes desperate; but by then (re)gaining Evolvability has become as very, very difficult and tedious undertaking. Sometimes up to the point where the existence of a project/company is in danger. With Spinning that´s different. If you´re practicing Spinning you cannot avoid all those practices. With Spinning you very quickly realize you cannot deliver reliably even on your 32 hour promises. Spinning thus is pulling on developers to adopt principles and practices for Evolvability. They will start actively looking for ways to keep their delivery rate high. And if not, management will soon tell them to do that. Because first the Product Owner then management will notice an increasing difficulty to deliver value within 32 hours. There, finally there emerges a way to measure Evolvability: The more frequent developers tell the Product Owner there is no way to deliver anything worth of feedback until tomorrow night, the poorer Evolvability is. Don´t count the “WTF!”, count the “No way!” utterances. In closing For sustainable software development we need to put Evolvability first. Functionality and Quality must not rule software development but be implemented within a framework ensuring (enough) Evolvability. Since Evolvability cannot be measured easily, I think we need to put software development “under pressure”. Software needs to be changed more often, in smaller increments. Each increment being relevant to the customer/user in some way. That does not mean each increment is worthy of shipment. It´s sufficient to gain further insight from it. Increments primarily serve the reduction of uncertainty, not sales. Sales even needs to be decoupled from this incremental progress. No more promises to sales. No more delivery au point. Rather sales should look at a stream of accepted increments (or incremental releases) and scoup from that whatever they find valuable. Sales and marketing need to realize they should work on what´s there, not what might be possible in the future. But I digress… In my view a Spinning cycle - which is not easy to reach, which requires practice - is the core practice to compensate the immeasurability of Evolvability. From start to finish of each issue in 32 hours max - that´s the challenge we need to accept if we´re serious increasing Evolvability. Fortunately higher Evolvability is not the only outcome of Spinning. Customer/management will like the increased flexibility and “getting more bang for the buck”.

Read the article

Skinny controller in ASP.NET MVC 4

- by thangchung

Rails community are always inspire a lot of best ideas. I really love this community by the time. One of these is "Fat models and skinny controllers". I have spent a lot of time on ASP.NET MVC, and really I did some miss-takes, because I made the controller so fat. That make controller is really dirty and very hard to maintain in the future. It is violate seriously SRP principle and KISS as well. But how can we achieve that in ASP.NET MVC? That question is really clear after I read "Manning ASP.NET MVC 4 in Action". It is simple that we can separate it into ActionResult, and try to implementing logic and persistence data inside this. In last 2 years, I have read this from Jimmy Bogard blog, but in that time I never had a consideration about it. That's enough for talking now. I just published a sample on ASP.NET MVC 4, implemented on Visual Studio 2012 RC at here. I used EF framework at here for implementing persistence layer, and also use 2 free templates from internet to make the UI for this sample. In this sample, I try to implementing the simple magazine website that managing all articles, categories and news. It is not finished at all in this time, but no problems, because I just show you about how can we make the controller skinny. And I wanna hear more about your ideas. The first thing, I am abstract the base ActionResult class like this: public abstract class MyActionResult : ActionResult, IEnsureNotNull { public abstract void EnsureAllInjectInstanceNotNull(); } public abstract class ActionResultBase<TController> : MyActionResult where TController : Controller { protected readonly Expression<Func<TController, ActionResult>> ViewNameExpression; protected readonly IExConfigurationManager ConfigurationManager; protected ActionResultBase (Expression<Func<TController, ActionResult>> expr) : this(DependencyResolver.Current.GetService<IExConfigurationManager>(), expr) { } protected ActionResultBase( IExConfigurationManager configurationManager, Expression<Func<TController, ActionResult>> expr) { Guard.ArgumentNotNull(expr, "ViewNameExpression"); Guard.ArgumentNotNull(configurationManager, "ConfigurationManager"); ViewNameExpression = expr; ConfigurationManager = configurationManager; } protected ViewResult GetViewResult<TViewModel>(TViewModel viewModel) { var m = (MethodCallExpression)ViewNameExpression.Body; if (m.Method.ReturnType != typeof(ActionResult)) { throw new ArgumentException("ControllerAction method '" + m.Method.Name + "' does not return type ActionResult"); } var result = new ViewResult { ViewName = m.Method.Name }; result.ViewData.Model = viewModel; return result; } public override void ExecuteResult(ControllerContext context) { EnsureAllInjectInstanceNotNull(); } } I also have an interface for validation all inject objects. This interface make sure all inject objects that I inject using Autofac container are not null. The implementation of this as below public interface IEnsureNotNull { void EnsureAllInjectInstanceNotNull(); } Afterwards, I am just simple implementing the HomePageViewModelActionResult class like this public class HomePageViewModelActionResult<TController> : ActionResultBase<TController> where TController : Controller { #region variables & ctors private readonly ICategoryRepository _categoryRepository; private readonly IItemRepository _itemRepository; private readonly int _numOfPage; public HomePageViewModelActionResult(Expression<Func<TController, ActionResult>> viewNameExpression) : this(viewNameExpression, DependencyResolver.Current.GetService<ICategoryRepository>(), DependencyResolver.Current.GetService<IItemRepository>()) { } public HomePageViewModelActionResult( Expression<Func<TController, ActionResult>> viewNameExpression, ICategoryRepository categoryRepository, IItemRepository itemRepository) : base(viewNameExpression) { _categoryRepository = categoryRepository; _itemRepository = itemRepository; _numOfPage = ConfigurationManager.GetAppConfigBy("NumOfPage").ToInteger(); } #endregion #region implementation public override void ExecuteResult(ControllerContext context) { base.ExecuteResult(context); var cats = _categoryRepository.GetCategories(); var mainViewModel = new HomePageViewModel(); var headerViewModel = new HeaderViewModel(); var footerViewModel = new FooterViewModel(); var mainPageViewModel = new MainPageViewModel(); headerViewModel.SiteTitle = "Magazine Website"; if (cats != null && cats.Any()) { headerViewModel.Categories = cats.ToList(); footerViewModel.Categories = cats.ToList(); } mainPageViewModel.LeftColumn = BindingDataForMainPageLeftColumnViewModel(); mainPageViewModel.RightColumn = BindingDataForMainPageRightColumnViewModel(); mainViewModel.Header = headerViewModel; mainViewModel.DashBoard = new DashboardViewModel(); mainViewModel.Footer = footerViewModel; mainViewModel.MainPage = mainPageViewModel; GetViewResult(mainViewModel).ExecuteResult(context); } public override void EnsureAllInjectInstanceNotNull() { Guard.ArgumentNotNull(_categoryRepository, "CategoryRepository"); Guard.ArgumentNotNull(_itemRepository, "ItemRepository"); Guard.ArgumentMustMoreThanZero(_numOfPage, "NumOfPage"); } #endregion #region private functions private MainPageRightColumnViewModel BindingDataForMainPageRightColumnViewModel() { var mainPageRightCol = new MainPageRightColumnViewModel(); mainPageRightCol.LatestNews = _itemRepository.GetNewestItem(_numOfPage).ToList(); mainPageRightCol.MostViews = _itemRepository.GetMostViews(_numOfPage).ToList(); return mainPageRightCol; } private MainPageLeftColumnViewModel BindingDataForMainPageLeftColumnViewModel() { var mainPageLeftCol = new MainPageLeftColumnViewModel(); var items = _itemRepository.GetNewestItem(_numOfPage); if (items != null && items.Any()) { var firstItem = items.First(); if (firstItem == null) throw new NoNullAllowedException("First Item".ToNotNullErrorMessage()); if (firstItem.ItemContent == null) throw new NoNullAllowedException("First ItemContent".ToNotNullErrorMessage()); mainPageLeftCol.FirstItem = firstItem; if (items.Count() > 1) { mainPageLeftCol.RemainItems = items.Where(x => x.ItemContent != null && x.Id != mainPageLeftCol.FirstItem.Id).ToList(); } } return mainPageLeftCol; } #endregion } Final step, I get into HomeController and add some line of codes like this [Authorize] public class HomeController : BaseController { [AllowAnonymous] public ActionResult Index() { return new HomePageViewModelActionResult<HomeController>(x=>x.Index()); } [AllowAnonymous] public ActionResult Details(int id) { return new DetailsViewModelActionResult<HomeController>(x => x.Details(id), id); } [AllowAnonymous] public ActionResult Category(int id) { return new CategoryViewModelActionResult<HomeController>(x => x.Category(id), id); } } As you see, the code in controller is really skinny, and all the logic I move to the custom ActionResult class. Some people said, it just move the code out of controller and put it to another class, so it is still hard to maintain. Look like it just move the complicate codes from one place to another place. But if you have a look and think it in details, you have to find out if you have code for processing all logic that related to HttpContext or something like this. You can do it on Controller, and try to delegating another logic (such as processing business requirement, persistence data,...) to custom ActionResult class. Tell me more your thinking, I am really willing to hear all of its from you guys. All source codes can be find out at here. Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="http://weblogs.asp.net//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs");

Read the article

Failing Sata HDD

- by DaveCol

I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Read the article

CodePlex Daily Summary for Saturday, April 07, 2012

CodePlex Daily Summary for Saturday, April 07, 2012Popular ReleasesHarness - Internet Explorer Automation: Harness 2.0.3: support the operation fo frameset, frame and iframe Add commands SwitchFrame GetUrl GoBack GoForward Refresh SetTimeout GetTimeout Rename commands GetActiveWindow to GetActiveBrowser SetActiveWindow to SetActiveBrowser FindWindowAll to FindBrowser NewWindow to NewBrowser GetMajorVersion to GetVersionBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesLightFarsiDictionary - ??????? ??? ?????/???????: LightFarsiDictionary - v1: LightFarsiDictionary - v1WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.3: Version: 2.5.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete [O] WAF: Mark the StringBuilderExtensions class as obsolete because the AppendInNewLine method can be replaced with string.Jo...RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.30: changes NEW: Added Support for "DirectUpload.net" links NEW: Added Support for "PixRoute.com" links NEW: Added Support for "ImagePicasa.com" links FIXED: "PixHub.eu" linksCommunity TFS Build Extensions: April 2012: Release notes to follow...ClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceLiberty: v3.2.0.0 Release 4th April 2012: Change Log-Added -Halo 3 support (invincibility, ammo editing) -Halo 3: ODST support (invincibility, ammo editing) -The file transfer page now shows its progress in the Windows 7 taskbar -"About this build" settings page -Reach Change what an object is carrying -Reach Change which node a carried object is attached to -Reach Object node viewer and exporter -Reach Change which weapons you are carrying from the object editor -Reach Edit the weapon controller of vehicles and turrets -An error dia...MSBuild Extension Pack: April 2012: Release Blog Post The MSBuild Extension Pack April 2012 release provides a collection of over 435 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUID’...DotNetNuke® Community Edition CMS: 06.01.05: Major Highlights Fixed issue that stopped users from creating vocabularies when the portal ID was not zero Fixed issue that caused modules configured to be displayed on all pages to be added to the wrong container in new pages Fixed page quota restriction issue in the Ribbon Bar Removed restriction that would not allow users to use a dash in page names. Now users can create pages with names like "site-map" Fixed issue that was causing the wrong container to be loaded in modules wh...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.3.1: One Click Install from NuGet Changes to Version 2.1.3.11. [assembly: AllowPartiallyTrustedCallers] has been added back into the AssemblyInfo.cs file to prevent failures with other assemblies in Medium trust environments. 2. The Lite data embedded into the assembly has been updated to include devices from December 2011. The 42 new RingMark properties will return Unknown if RingMark data is not available. Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla...MVC Controls Toolkit: Mvc Controls Toolkit 2.0.0: Added Support for Mvc4 beta and WebApi The SafeqQuery and HttpSafeQuery IQueryable implementations that works as wrappers aroung any IQueryable to protect it from unwished queries. "Client Side" pager specialized in paging javascript data coming either from a remote data source, or from local data. LinQ like fluent javascript api to build queries either against remote data sources, or against local javascript data, with exactly the same interface. There are 3 different query objects exp...ExtAspNet: ExtAspNet v3.1.2: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-04 v3.1.2 -??IE?????????????BUG（??"about:blank"?...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.50: Highlight features & improvements: • Significant performance optimization. • Allow store owners to create several shipments per order. Added a new shipping status: “Partially shipped”. • Pre-order support added. Enables your customers to place a Pre-Order and pay for the item in advance. Displays “Pre-order” button instead of “Buy Now” on the appropriate pages. Makes it possible for customer to buy available goods and Pre-Order items during one session. It can be managed on a product variant ...WiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryDocument.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.New ProjectsAdvertising Management: Ph?n m?m qu?n lý qu?ng cáoAgile Compact Database: It is database for all. AssemblyTransformer: AssemblyTransformer is a tool for modifying .NET assemblies using Mono Cecil. It handles the entire transformation process including strong name signing and offers a simple command-line interface and a basic framework for creating and configuring specific transformations.Cafe For You: Ph?n m?m gi?i thi?u và qu?n lý quán cafeClient-side Templated Script Control: Allows a developer to add a repeater-style templated list control to a web page that will be data bound client-side, and may respond to client events. The control may be data bound by a web service call on initialization, and may also have it's data source set via client code.CRM Project - Beginner Sample: Sample to help beginners to start in C# development. Ejemplo para ayudar a quienes inician con el desarrollo en C#.Deployment Made Easy: The goal of this project is to make deployments to windows servers easy using the web deployment toolEasyCMS: EasyCMSExcel to SQL Server Database Bulk Transfer: Quick and simple WPF tool to allow users export data from an Excel spreadsheet to a SQL Server database table. Provided as is. But if you need any help let me know. HTML Client demo for WCF RIA Services: Demo application with HTML client (upshot.js + knockout.js) on WCF RIA ServicesKOI: Kinect Open Interface: Kinect Open Interface, KOI, provides a way to detect and have the user confirm 11 gestures for your UI. Please read my blog for info: http://www.kinecthelp.com/2012/04/koi-kinect-open-interface.htmlLazyWinAdmin: LazyWinAdmin is a Powershell script to manage local or remote machine ressources.LCDSmartie dll to display Audio spectrum on Windows 7: An LCDSmartie plugin that displays anything being played as an audio spectrum.LiveHelpChatApp: With Live chat help you can provide online / Offline help to your client it has facebook style chat for online and offline users Download and EnjoyMailSender: Small tool for sending mail messages contains multiple attachements with sum size bigger than allowed size. You can drag'n'drop attachments and click send - application split all attachments to parts and sent it separately. There is not address book yet. Mauricio: Mauricio Lima PageMiddleware and Enterprise services foundation: Define a model of deployment and management for Middleware and enterprise applicationsMyFirstPro: This is a test projOld Games Launcher: Old Games Launcher is a combined DosBox frontend & a Direct Draw game/application starter.Pharmakos Studio: Pharmakos Studio is an extensible IDE. It was originally written specifically as an UnrealScript editor for the UDK, however it is being written so that any language can be supported via plugins.Proyecto Eclipse-Android: Proyectos con Eclipse-AdroidProyectos II: Proyecto para Farmaciapullsource: pull source directsource filterQuizzer: Awesome program for quizzes and tests.Solution Settings for Visual Studio: Solution Settings for Visual Studio allows a file containing settings such as formatting, fonts and colors to be included with a project. When the solution is opened, these settings are automatically applied, and when it is closed, the changes are reverted.sundance: test test testWebcomic Reader: A little Idea for an on-, and offline usable, touch-friendly Windows 7 Webcomic Reader.WinRT PathTextBlock: WinRT PathTextBlock is a control that overcomes some of the limitations in the built in WinRT TextBlock, such as not being able to outline the text, and not being able to distort the text, for example to draw it along a circle. Previously, you could use a tool like Expression Design to create the text and export it as a Path, but this wouldn't work for text that needed to be specified at run time. This control allows you to specify the Text property and it will generate the proper Path obj...Yaplex open source projects: Yaplex open source projects????API SDK-VB6(oauth2): ????API SDK-VB6(oauth2)????????API SDK VB6: ??????????API SDK vb?

Read the article

When I shutdown the computer, it restarts

- by Prabu

I am unable to shutdown. Whenever I try to shutdown, it reboots. I am running Ubuntu 12.10. I have run the boot-repair and this is the result: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos1)/boot/grub. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.10 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 1,936,809,983 1,936,807,936 83 Linux /dev/sda2 1,936,812,030 1,953,523,711 16,711,682 5 Extended /dev/sda5 1,936,812,032 1,953,523,711 16,711,680 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 229a5484-7659-4ce1-98ce-2f05f61a1ffa ext4 /dev/sda5 6c6dca25-ab67-4de4-8602-26fdb6154781 swap /dev/sr0 iso9660 Ubuntu 12.10 amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=6c6dca25-ab67-4de4-8602-26fdb6154781 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 200.155235291 = 214.915047424 boot/grub/grub.cfg 1 40.280788422 = 43.251167232 boot/initrd.img-3.5.0-17-generic 1 2.468288422 = 2.650304512 boot/initrd.img-3.5.0-19-generic 1 200.149234772 = 214.908604416 boot/vmlinuz-3.5.0-17-generic 1 1.990135193 = 2.136891392 boot/vmlinuz-3.5.0-19-generic 1 2.468288422 = 2.650304512 initrd.img 1 1.990135193 = 2.136891392 vmlinuz 1 1.990135193 = 2.136891392 vmlinuz.old 1 =============================== StdErr Messages: =============================== cat: write error: Broken pipe File descriptor 8 (/proc/6297/mounts) leaked on lvscan invocation. Parent PID 13390: bash No volume groups found ADDITIONAL INFORMATION : =================== log of boot-repair 2012-12-17__01h53 =================== boot-repair version : 3.197~ppa1~quantal boot-sav version : 3.197~ppa1~quantal glade2script version : 3.2.2~ppa45~quantal boot-sav-extra version : 3.197~ppa1~quantal boot-repair is executed in live-session (Ubuntu 12.10, quantal, Ubuntu, x86_64) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity =================== os-prober: /dev/sda1:Ubuntu 12.10 (12.10):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sr0: LABEL="Ubuntu 12.10 amd64" TYPE="iso9660" /dev/sda1: UUID="229a5484-7659-4ce1-98ce-2f05f61a1ffa" TYPE="ext4" /dev/sda5: UUID="6c6dca25-ab67-4de4-8602-26fdb6154781" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== sda1/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== sda1/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Oct 17 14:59 grub.d total 72 -rwxr-xr-x 1 root root 7541 Oct 14 17:36 00_header -rwxr-xr-x 1 root root 5488 Oct 4 09:30 05_debian_theme -rwxr-xr-x 1 root root 10891 Oct 14 17:36 10_linux -rwxr-xr-x 1 root root 10258 Oct 14 17:36 20_linux_xen -rwxr-xr-x 1 root root 1688 Oct 11 14:10 20_memtest86+ -rwxr-xr-x 1 root root 10976 Oct 14 17:36 30_os-prober -rwxr-xr-x 1 root root 1426 Oct 14 17:36 30_uefi-firmware -rwxr-xr-x 1 root root 214 Oct 14 17:36 40_custom -rwxr-xr-x 1 root root 216 Oct 14 17:36 41_custom -rw-r--r-- 1 root root 483 Oct 14 17:36 README =================== UEFI/Legacy mode: This live-session is not in EFI-mode. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 992GB 992GB primary ext4 boot 2 992GB 1000GB 8556MB extended 5 992GB 1000GB 8556MB logical linux-swap(v1) Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== parted -lm: BYT; /dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1CH1; 1:1049kB:992GB:992GB:ext4::boot; 2:992GB:1000GB:8556MB:::; 5:992GB:1000GB:8556MB:linux-swap(v1)::; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 3.9G 100M 3.8G 3% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run /dev/sr0 iso9660 763M 763M 0 100% /cdrom /dev/loop0 squashfs 717M 717M 0 100% /rofs tmpfs tmpfs 3.9G 32K 3.9G 1% /tmp none tmpfs 5.0M 4.0K 5.0M 1% /run/lock none tmpfs 3.9G 176K 3.9G 1% /run/shm none tmpfs 100M 52K 100M 1% /run/user /dev/sda1 ext4 910G 26G 838G 3% /mnt/boot-sav/sda1 =================== fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000da1e9 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1936809983 968403968 83 Linux /dev/sda2 1936812030 1953523711 8355841 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 1936812032 1953523711 8355840 82 Linux swap / Solaris Partition outside the disk detected. =================== Recommended repair Recommended-Repair This setting will reinstall the grub2 of sda1 into the MBR of sda. Additional repair will be performed: unhide-bootmenu-10s Unhide GRUB boot menu in sda1/etc/default/grub grub-install (GRUB) 2.00-7ubuntu11,grub-install (GRUB) 2. Reinstall the GRUB of sda1 into the MBR of sda Installation finished. No error reported. grub-install /dev/sda: exit code of grub-install /dev/sda:0 chroot /mnt/boot-sav/sda1 update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.5.0-19-generic Found initrd image: /boot/initrd.img-3.5.0-19-generic Found linux image: /boot/vmlinuz-3.5.0-17-generic Found initrd image: /boot/initrd.img-3.5.0-17-generic Found memtest86+ image: /boot/memtest86+.bin Unhide GRUB boot menu in sda1/boot/grub/grub.cfg Boot successfully repaired. You can now reboot your computer.

Read the article

CodePlex Daily Summary for Wednesday, May 26, 2010

CodePlex Daily Summary for Wednesday, May 26, 2010New Projects3D File Manager: 3D File manager is an application that aims to show how could look file manager in 3D. It´s developed in C# and XNA frameworkAcies: Acies is a dungeon crawler game done with C# and XNA.ActiveWinery: The open source winery and vineyard application.CC.Yacht: CC.Yacht is a client/server yacht dice game written in C# .NET. It utilizes a net.tcp WCF duplex service for client/server communication.Community Forums NNTP bridge: Community project for accessing the MS Web-Forums via an open source NNTP newsserver (bridge).Dojo Timer: WPF timer for Coding Dojo meetings. Timer feito em WPF para Coding Dojo.GameFX - The Game Development Framework: The Game Development Framework (GameFX) is simply a set of libraries to be used as the foundation for any simple 2D tile-based game. It can be used...Greg Roberts MVC Extensions: Asp.Net MVC Extensions including JSONP ActionResult. Targeted for MVC 2 and .NET 4.0.IIS Deploy: Project to develop a tool that automates the deploy Web sites and WCF services in single server environments and clustered.MarkLogic Sample Authoring App for Word: The MarkLogic Authoring Sample App for Word lets authors enrich Word documents using Content Controls, associate and manage metadata with those Con...Mono.Addins: Mono.Addins is a framework for creating extensible applications, and for creating add-ins which extend applications.MPCLI: MPCLI is a library that brings the power of the GNU MP big numbers library to those who use CLS-compliant languages such as C#, F#, and Visual Basi...NTFS parser classes: This is a C++ library to help parsing an NTFS volume, as well as file records and attributes. It will facilitate much when handling NTFS filesystem...Oddworld Level Gen: A 2D platform game, with Oddworld : Abe's Oddysee asset. The game introduce a dynamic system to generate the next level according to the previous l...Page Action Web Part for SharePoint 2007: This Web Part for SharePoint 2007 allows you to perform actions (such as causing an "Access is denied", redirect to another web page, view content ...Piggy Bank: Piggy Bank is a web-based financial application targetted towards kids.Productivity Hub Solutions: The Productivity Hub 2010 is a customizable, on-premise training solution for technology products. Developed by RedTech for Microsoft, the Producti...PyQt port of TortoiseHg: PyQt port of TortoiseHg (aka TortoiseHg 2.0)Releaser™: This is my private project. Currently, I'm not going to support it publicly.SLManagers: SLManagers 用于动态加载组件实现对程序不同的的管理Smith Async .NET Memcached Client: Async .NET Memcached Client is a fully asynchronous implementation of a memcached client. The advantage of a fully asynchronous client is that you...Tauck Public API: Tauck's public API allows for travel agencies and other parterners to use Tauck's product information in their websites and other systems. Virtualizing WrapPanel: Virtualizing WrapPanel improves performance when binding a ListBox/ListView to a large amount of data. It is written in C#New Releases3D File Manager: 3D File manager: 3D File managerAragon Online Client: Aragon Online Client: The executable version of the Aragon Online Client can be installed from the Aragon Online page: http://aragon-online.net/aoclient/publish.phpASP.NET MVC CMS ( Using CommonLibrary.NET ): CommonLibrary CMS Alpha 2: CommonLibrary CMSA simple yet powerful CMS system in ASP.NET MVC 2 using C# 3.5. ActiveRecord based support for Blogs, Widgets, Pages, Parts, Ev...BFBC2 PRoCon: PRoCon 0.5.1.8: It's not even funny anymore =\Code for Rapid C# Windows Development eBook: LLBLGen LINQPad Data Context Driver Ver 1.0.0.3: Second release of a Static LLBLGen Pro Data Context Driver for LINQPad For LLBLGen Pro versions 2.6 and 3.0 beta. Fixed 'connection string not ini...Community Forums NNTP bridge: Community Forums NNTP Bridge V01: This is the first release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open sourcen NNTP Bridge.Community Forums NNTP bridge: Community Forums NNTP Bridge V02: This is the second release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open sourcen NNTP Bridge. ...DDDSample.Net: 0.9: Release 0.9 contains two major improvements: Vanilla version (both Synch and Asynch) has been updated so its model more closely resembles Java orig...DEWD: DEWD for Umbraco: Alpha release of the package. Usable for simple SQL editing, but lacking some core features such as validation, user friendly error handling, confi...Dojo Timer: Dojo Timer v1: Primeira versão Dojo Timer.eXpress Persistent Objects (XPO) Toolkit: Samples: Video Channel Channel.zip sample shows how to build a video site using XPO and WCF Data Services. DevExpress Channel DevExpress Channel Browse ...F# Project Extender: V0.9.2.1 (VS2008,VS2010): F# project extender for Visual Studio 2008 and Visual Studio 2010. Fixed bugs: -Project extender 0.9.2.0 can't be loaded in VS2008 without SDKFeedback Form: Feedback Application: Installer of the projectFeedback Form: Feedback Form: .sln for Feedback Form ApplicationGameFX - The Game Development Framework: Version 1.0 (Beta): Project is Visual Studio 2008 solution. GameFX Source code and sample program. The sample program allows you to create maps of any size, and drop ...MarkLogic Sample Authoring App for Word: MarkLogic Sample Authoring App for Word 1.0-1: Initial release of the MarkLogic Sample Authoring App for Word. See the home page for an overview on functionality. Within the release you'll ...MarkLogic Toolkit for Word: MarkLogic Toolkit for Word 1.2-1: Release built in support of the MarkLogic Sample Authoring App for Word. Updates include: update to XQuery API to expose functions for working w...Microsoft SQL Server Community & Samples: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release contains sample code for Microsoft SQL Server 2008R2. For many of these samples you will also need...Microsoft SQL Server Product Samples: Analysis Services: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...Microsoft SQL Server Product Samples: Data Programming: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 RTM: Sample Databases for Microsoft SQL Server 2008R2 (RTM)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. ...Microsoft SQL Server Product Samples: End to End: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...Microsoft SQL Server Product Samples: Engine: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...Microsoft SQL Server Product Samples: Integration Services: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...Microsoft SQL Server Product Samples: Replication: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...Microsoft SQL Server Product Samples: Reporting Services: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...Microsoft SQL Server Product Samples: Scripts: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...Microsoft SQL Server Product Samples: Service Broker: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...Microsoft SQL Server Product Samples: XML: SQL Server 2008R2 RTM: Microsoft SQL Server 2008R2 (RTM) This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples y...NLog - Advanced .NET Logging: Nightly Build 2010.05.25.001: Changes since the last build:2010-05-24 23:08:47 Jarek Kowalski Fixed base constructor invocation to ensure consistency. Added tests for common wra...NTFS parser classes: NTFS parser lib 0.55: 0.55openrs: Revision 3: Things that have been added since last release: Vector expanding Dynamic vectors Vector put method chaining Basic ISAAC implementation Wor...Page Action Web Part for SharePoint 2007: Page Action Web Part v1.0.0.0: First release of the Page Action Web Part v1.0.0.0.Productivity Hub Solutions: Silverlight Bookshelf: The Silverlight Bookshelf component of the 2010 Productivity Hub provides 4 accordion-style vertical tabs dispalying Featured Video, Featured Conte...Productivity Hub Solutions: Silverlight Product Carousel: The Product Carousel Silverlight component provides a rich navigation experience to the home page of the 2010 Productivity Hub - presenting the pro...Rawr: Rawr 2.3.18: >Rawr3 Public Beta has been released! Click here for details.< - Fix for bug in parsing characters with certain abnormal characters in their data. ...Runtime Intelligence Data Visualizer: RI Data Visualizer Release 1: This release of the RI Data Visualizer contains both a WPF client that displays application usage data and a Silverlight client that displays featu...sGSHOPedit: sGSHOPedit v1.1a: Fixed: bug in parsing description from "itemextdesc.txt" Fixed: surface change event Fixed: range for numeric values Added: search featureSLManagers: SlManagers: 实现简单的组件动态下载使用Mef技术Sudoku (Multiplayer in RnD): Sudoku (Multiplayer in RnD) 1.0.1.0 program: Sudoku project was to practice on C# by making a desktop application using some algorithm Idea: The basic idea of algorithm is from http://www.ac...Sudoku (Multiplayer in RnD): Sudoku (Multiplayer in RnD) 1.0.1.0 source: user-interface, multi-threading, formatting Sudoku project was to practice on C# by making a desktop application using some algorithm Idea: The...Tauck Public API: XML Package 1.0: Current Release of XML dataTeach.Net: Teach.Net 1.0 Alpha: First alpha version. It should work, but there's gonna be bugs. Also, no intellisense documentation (or any other sort of documentation) yet. I'm w...VCC: Latest build, v2.1.30525.0: Automatic drop of latest buildVista Media Center TCP/IP Controller: Win7 64 and 32 bit Alpha - button command fix: button command fix , button-play, button-pause, button-skip back, button-skip fwd. Confirmed works on x64. Has not been tested on x32XsltDb - DotNetNuke Module Universal Building Block: 01.01.21: ASP.NET controls TreeView and TextEditor usage Live demo site Attention This release requires DNN 5.2 or higher as it using Telerik classes.in...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active ProjectsAStar.netpatterns & practices – Enterprise Librarypatterns & practices: Windows Azure Security GuidanceRawrSqlServerExtensionsMono.AddinsBlogEngine.NETGMap.NET - Great Maps for Windows Forms & PresentationCodeReviewCaliburn: An Application Framework for WPF and Silverlight

Read the article

qemu-kvm virtual machine virtio network freeze under load

- by Rick Koshi

I'm having a problem with my virtual machines, where the network will freeze under heavy load. I'm using CentOS 6.2 as both host and guest, not using libvirt, just running qemu-kvm directly as follows: /usr/libexec/qemu-kvm \ -drive file=/data2/vm/rb-dev2-www1-vm.img,index=0,media=disk,cache=none,if=virtio \ -boot order=c \ -m 2G \ -smp cores=1,threads=2 \ -vga std \ -name rb-dev2-www1-vm \ -vnc :84,password \ -net nic,vlan=0,macaddr=52:54:20:00:00:54,model=virtio \ -net tap,vlan=0,ifname=tap84,script=/etc/qemu-ifup \ -monitor unix:/var/run/vm/rb-dev2-www1-vm.mon,server,nowait \ -rtc base=utc \ -device piix3-usb-uhci \ -device usb-tablet /etc/qemu-ifup (used by the above command) is a very simple script, containing the following: #!/bin/sh sudo /sbin/ifconfig $1 0.0.0.0 promisc up sudo /usr/sbin/brctl addif br0 $1 sleep 2 And here's the info on br0 and other interfaces: avl-host3 14# brctl show bridge name bridge id STP enabled interfaces br0 8000.180373f5521a no bond0 tap84 virbr0 8000.525400858961 yes virbr0-nic avl-host3 15# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:1e brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:20 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 7: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet 172.16.1.46/24 brd 172.16.1.255 scope global br0 inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 8: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 9: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 500 link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff 12: tap84: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether ba:e8:9b:2a:ff:48 brd ff:ff:ff:ff:ff:ff inet6 fe80::b8e8:9bff:fe2a:ff48/64 scope link valid_lft forever preferred_lft forever bond0 is a bond of em1 and em2. virbr0 and virbr0-nic are vestigial interfaces left over from CentOS's default installation. They are unused (as far as I know). The guest runs perfectly until I run a large 'rsync', when the network will freeze after some seemingly-random time (usually under a minute). When it freezes, there is no network activity in or out of the guest. I can still connect to the guest's console via vnc, but it is unable to speak out its network interface. Any attempt to 'ping' from the guest gives a "Destination Host Unreachable" error for 3/4 packets and no reply for every fourth packet. Sometimes (perhaps two thirds of the time), I can bring the interface back to life by doing a "service network restart" from the guest's console. If this works (and if I do it before the rsync times out), the rsync will resume. Usually it will freeze again within a minute or two. If I repeat, the rsync will eventually finish, and I presume the machine goes back to waiting for another period of heavy load. Throughout the whole process, there are no console errors or relevant (that I can see) syslog messages on either guest or host machine. If the "service network restart" doesn't work the first time, trying again (and again and again) never seems to work. The command completes normally, with normal output, but the interface stays frozen. However, a soft reboot of the guest machine (without restarting qemu-kvm) always seems to bring it back. I am aware of the "lowest mac address" assignment problem, where the bridge takes on the mac address of the slave interface with the lowest mac address. This causes temporary network freezes, but is definitely not what's happening for me. My freezes are permanent until manual intervention, and you can see from the 'ip addr show' output above that the mac address being used by br0 is that of the physical ethernet. There are no other virtual machines running on the host. I've verified that each virtual machine on the subnet has its own unique mac address. I have rebuilt the guest machine several times, and I have tried this on three different host machines (identical hardware, built identically). Oddly, I do have one virtual host (the second of this series) which never seemed to have a problem. It never had its network freeze when it was running the same rsync during its build. It's particularly odd because it was the second build. The first, on a different host, did have the freezing problem, but the second did not. I assumed at the time that I had done something wrong with the first build, and that the problem was resolved. Unfortunately, the problem reappeared when I built the third VM. Also unfortunately, I can't do many tests with the working VM, as it's now in production use, and I'm hoping I can find the cause of this issue before that machine starts having problems. It's possible that I just got really lucky while running the rsync on the working machine, and that one time it didn't freeze. Of course it's possible that I somehow changed the build scripts without realizing it and re-broke something, but I can't find any such thing. In any case, I'm hoping someone has some idea what could cause this. Addendum: Preliminary tests suggest that I don't have the problem if I substitute e1000 for virtio in the first -net flag to qemu-kvm. I don't consider this a solution, but it is suitable for a stopgap. Has anyone else had (or better yet, solved) this problem with the virtio network driver?

Read the article

CodePlex Daily Summary for Wednesday, February 09, 2011

CodePlex Daily Summary for Wednesday, February 09, 2011Popular ReleasesWatchersNET.TagCloud: WatchersNET.TagCloud 01.09.03: Whats NewAdded New Skin TagTastic http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-TagTastic-Skin.jpg Added New Skin RoundedButton http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-RoundedButton-Skin.jpg changes Tag Count fixed on Tag Source Referrals Fixed Tag Count when multiple Tag Sources are usedFolder Space Quota: com_folderspacequotaV1.1: Correct Language String settingWinXound: WinXound 3.4.x (Windows - OsX - Linux): Release Notes (3.4.x) for all platforms: New: Added an internal audio player (it is automatically called when rendering to an audio file or called by the user with Ctrl+P); New: Reimplemented the orc/sco file editor (and of course also the ability to convert them to the csd format) - The default open action can be changed in the settings; New: The new untitled or imported files are now automatically saved into a temporary directory (no more need to save them before to compile); New: Add...ExtremeML: ExtremeML v1.0 Beta 3: VS solution source code updated for compatibility with VS2010 (accommodates VS2010 breaking changes in T4 template support).People's Note: People's Note 0.23: Sorry for the long pause between updates — I had my hands full. Version 0.23 makes fairly significant improvements: A bug with local note deletion has been fixed. Synchronization has been improved. A single failed note no longer stops the whole process. Unsynchronized notes are now highlighted. Added an option to display notebook title; thanks to Vovansky for the idea. Text colour has been fixed for people whose default is not black; thanks to JZerr for pointing this out. Incorrect ...Finestra Virtual Desktops: 1.1: This release adds a few more performance and graphical enhancements to 1.0. Switching desktops is now about as fast as you can blink. Desktop switching optimizations New welcome wizard for Vista/7 Fixed a few minor bugs Added a few more options to the options dialog (including ability to disable the taskbar switching)youtubeFisher: youtubeFisher 3.0 [beta]: What's new: Supports YouTube's new layout Complete internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details.fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroEnhSim: EnhSim 2.3.6 BETA: 2.3.6 BETAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 ...TestApi - a library of Test APIs: TestApi v0.6: TestApi v0.6 comes with the following changes: TestApi code development has been moved to Codeplex: Moved TestApi soluton to VS 2010; Moved all source code to Codeplex. All development work is done there now. Fault Injection API: Integrated the unmanaged FaultInjectionEngine.dll COM component in the build; Cleaned up FaultInjectionEngine.dll to build at warning level 4; Implemented “FaultScope” which allows for in-process fault injection; Added automation scripts & sample program; ...AutoLoL: AutoLoL v1.5.5: AutoChat now allows up to 6 items. Items with nr. 7-0 will be removed! News page url's are now opened in the default browser Added a context menu to the system tray icon (thanks to Alex Banagos) AutoChat now allows configuring the Chat Keys and the Modifier Key The recent files list now supports compact and full mode Fix: Swapped mouse buttons are now properly detected Fix: Sometimes the Play button was pressed while still greyed out Champion: Karma Note: You can also run the u...mojoPortal: 2.3.6.2: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2362-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Rawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...IronRuby: 1.1.2: IronRuby 1.1.2 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. In this release we fixed several major issues: - problems that blocked Gem installation in certain cases - regex syntax: the parser was replaced with a new one that is much more compatible with Ruby 1.9.2 - cras...MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.Facebook C# SDK: 5.0.2 (BETA): PLEASE TAKE A FEW MINUTES TO GIVE US SOME FEEDBACK: Facebook C# SDK Survey This is third BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. This release contains some breaking changes. Particularly with authentication. After spending time reviewing the trouble areas that people are having using th...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 3.0.0 for MVC3: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. ChangelogTargeting ASP.NET MVC 3 and .NET 4.0 Additional UpdatePriority options for generating XML sitemaps Allow to specify target on SiteMapTitleAttribute One action with multiple routes and breadcrumbs Medium Trust optimizations Create SiteMapTitleAttribute for setting parent title IntelliSense for your sitemap with MvcSiteMapSchem...patterns & practices SharePoint Guidance: SharePoint Guidance 2010 Hands On Lab: SharePoint Guidance 2010 Hands On Lab consists of six labs: one for logging, one for service location, and four for application setting manager. Each lab takes about 20 minutes to walk through. Each lab consists of a PDF document. You can go through the steps in the doc to create solution and then build/deploy the solution and run the lab. For those of you who wants to save the time, we included the final solution so you can just build/deploy the solution and run the lab.New Projects.NET Proxy (netProxy): ASP.NET and Javascript proxies for accessing external content. The ASPX file can be used for returning external content over the current channel (HTTP/SSL). Used with the ASPX, the JS file can provide remote server access (no "same origin policy") with XMLHttpRequest syntax.CalCheck: CalCheck is a Calendar Checking Tool for Outlook. It opens the default Calendar and checks the items in the calendar for known problems, and for certain logic problems, etc.CBM11: CBM11 makes use of the Cosmos C# operating system project, and 6502 CPU emulation code, to provide an bootable 6502 CPU environment, complete with simulated RAM, and a built-in ML monitor.Ela, functional language: Ela is a modern functional programming language that runs on CLR and Mono. It's developed in C#.Framework for Image Processing: This is small framework of image processing tools.fuv: fuv is a programmer's editor that is an excellent replacement for vim. *All* editing is done by searching and replacing over the existing text, using regular expressions.HD44780-compatible Character LCD class: LCD class for .NET Micro Framework provides everything needed to work with HD44780-compatible Character LCD.Home Budget Planner: Home Budget PlannerMath training program: The math training program. Great for kids who started to learn addition and multiplication tables. Easy interface, friendly design. Features timer. Number of equations and a math sign are set up by user. It's developed in C#.Mefisto.NET CMS: Mefisto.NET CMS is a project of CMS, developped in ASP.NET MVC3, coupled with MEF and ENTITY FRAMEWORK. This project is respectful of good practice: - accessible - based on jquery - using css - expandable with mef Now you're interested, contact me !MongoMapper: A .NET Object Mapper for MongoDB over MongoDB C# DriverMoshpit: A companion WP7 app for Microsoft Student Partners and students interested in everything Microsoft has to offer in the Academic space.myproject_0023: test firstNonHealthServicePageSample: NonHealthServicePageSample shows how to create a HealthVault Online application without deriving from HealthServicePage. This is developed in C#.Pokemon Battle System: A battle system for a roleplaying forums. Putting Data in Cold Storage with Windows Azure Table: Historical records and blobs are two examples of data that aren't necessarily kept in relational storage forever. Use Windows Azure Table to put "completed" records into cold storage. See a detailed explanation of this C# project at: http://tinyurl.com/4ocy2aj.Python library to read/write ooxml document files: Python library to read/write ooxml document filesRemoteLogMonitor: A tool which can monitor logs in remote computer realtimeRetete: Aplicatia gestioneaza stocul unui restaurant pe baza de retete. Materia prima este introdusa in sistem prin receptii si inventar, iar la vanzare este consumata in functie de retetele configurate. Vanzarile pot fi inregistrate pe o casa de marcat folosind driver-ul DocPrint. SilverDiagram Extensions: Tutorials, utilities and samples for Silver Diagram, a fast and extendable client framework for diagrams.SoPrism: SoPrism is a Solution Visual Studio Template using best practices to build a Silverlight composite application. This template generate a full Silverlight application based on a solid architecture including the Model-View-ViewModel (MVVM) pattern and PRISM framework.TempProject: Temp project hostingWCF Data Services Toolkit: The WCF Data Services Toolkit is a set of extensions to WCF Data Services (the .NET implementation of OData) that attempt to make it easier to create OData services on top of arbitrary data stores without having deep knowledge of LINQ.Web Browser BOT.NET: To automate to manipulate form using .NET codeZombie Blogger: Zombie Blog Engine

Read the article

CodePlex Daily Summary for Friday, June 10, 2011

CodePlex Daily Summary for Friday, June 10, 2011Popular ReleasesZen4Sync, Orchestration and Test Load platform for SQL Server Merge Replication: Zen4Sync Report 1.0 - Excel Add-In: Zen4Sync Report is an Excel Add-In allowing you to generate reports based on the data generated by your Test Sessions. Choose a Zen4Sync Report release according to your version of Excel. The downloaded .zip archive contains all the resources needed to install the Zen4Sync Report Add-In for your version of Excel. For instrunctions on how to install, use and customize Zen4Sync Report, please see the Zen4Sync Report Guide.Candescent NUI: Candescent NUI Start Menu: This is the first version of the Candescent NUI Start Menu. There is currently only one item in the start menu by default (Windows Explorer). There is no user interface for configuration yet, but you can add programs yourself by adding lines to the file menu_config.csv. Please don't change the first line. Lines for programs have the following format: Name;Path Default Explorer;c:\windows\explorer.exe MyApp;c:\...\myapp.exe To show the menu, present your open hand to the kinect at a distan...Media Companion: MC 3.406b weekly: An minor issue was found with 3.406b, the fixed version is now posted.... Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. Refer to the documentation on this site for the Installation & Setup Guide Important! If you find MC not displaying movie data properly, please try a 'movie rebuild' to reload the data from the nfo's into MC's cache. Fixes Movies Readded movie preference to rename invalid or scene nfo's to info extension Fix crash during ...SCCM Client Actions Tool: SCCM Client Actions Tool v0.5.1: SCCM Client Actions Tool v0.5.1 is currently the most stable version and includes all of the functionality requested so far. It comes with following changes since last version: Fixed an incorrect path to x64 client setup folder. It comes as a ZIP file that contains three files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively a...Windows Azure VM Assistant: AzureVMAssist V1.0.0.5: AzureVMAssist V1.0.0.5 (Debug) - Test Release VersionSizeOnDisk: 1.8.0.3: Fix (issue 317): Main window icon loading error on windows server 2003 32bit runing on x86 cpu. Bypass of the Microsoft windows comexception.SketchFlow Template for Windows Phone: SketchFlow Template for Windows Phone 7: Initial release. Please make sure you are using a version of Blend with SketchFlow enabled and have also installed the the Mango developer tools for Windows Phone. fastJSON: v1.8: - Silverlight 4.0+ support merged - RegisterCustomType() for user defined serialization/deserialization without changing the source code open closed principalNetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9: Changes: - fix examples (include issue 16026) - add new examples - 32Bit/64Bit Walkthrough is now available in technical Documentation. Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...Reusable Library: V1.1.3: A collection of reusable abstractions for enterprise application developerClosedXML - The easy way to OpenXML: ClosedXML 0.54.0: New on this release: 1) Mayor performance improvements. 2) AdjustToContents now take into account the text rotation. 3) Fixed issues 6782, 6784, 6788HTML-IDEx: HTML-IDEx .15 ALPHA: This release fixes line counting a little bit and adds the masshighlight() sub, which highlights pasted and inserted code.AutoLoL: AutoLoL v2.0.3: - Improved summoner spells are now displayed - Fixed some of the startup errors people got - Double clicking an item selects it - Some usability changes that make using AutoLoL just a little easier - Bug fixes AutoLoL v2 is not an update, but an entirely new version! Please install to a different directory than AutoLoL v1Host Profiles: Host Profiles 1.0: Host Profiles 1.0 Release Quickly modify host file Automatically flush dnsVidCoder: 0.9.2: Updated to HandBrake 4024svn. This fixes problems with mpeg2 sources: corrupted previews, incorrect progress indicators and encodes that incorrectly report as failed. Fixed a problem that prevented target sizes above 2048 MB.SharePoint Search XSL Samples: SharePoint 2010 Samples: I have updated some of the samples from the 2007 release. These all work in SharePoint 2010. I removed the Pivot on File Extension because SharePoint 2010 search has refiners that perform the same function.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta5: ??AcDown?????????????，??????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta5 ?????????? ???? ?? ???????? ???"????????"?? ????????????? ????????/???? ?? ???"????"??? ?? ??????????? ?? ?? ??????????? ?? ?????????????????? ??????????????????? ???????????????? ????????????Discussions???????? ????AcDown??????????????VFPX: GoFish 4 Beta 1: Current beta is Build 144 (released 2011-06-07 ) See the GoFish4 info page for details and video link: http://vfpx.codeplex.com/wikipage?title=GoFishSterling NoSQL OODB for .NET 4.0, Silverlight 4 and 5, and Windows Phone 7: Sterling OODB v1.5: Welcome to the Sterling 1.5 RTM. This version is backwards compatible without modification to the 1.4 beta. For the 1.0, you will need to upgrade your database. Please see this discussion for details. You must modify your 1.0 code for persistence. The 1.5 version defaults to an in-memory driver. To save to isolated storage or use one of the new mechanisms, see the available drivers and pass an instance of the appropriate one to your database (different databases may use different drivers). ...patterns & practices: Project Silk: Project Silk Community Drop 10 - June 3, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Application Notifications" chapter. Updated "Server-Side Implementation" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To install and run the reference implementation, you must perform the fol...New ProjectsAngry Apps: A game platform written on top of XNA Game Studio. The purpose of this project is to project a vanilla type Game project which can be used in many types of games.BLooD_ICQ: bloodicqCloud Fox: Cloud Fox is a Windows Phone application that allows you to view your Firefox Sync data on your mobile phone. It is similar to Firefox Home for iPhone. The current version will target phones running NoDo, but future versions will eventually require Mango. The application is developed in C# using Silverlight, Json.Net, Mvvm Light and Ninject.Configuration files Merger: This program is to help to merge different config files(environmental difference) and common config file into a single web.config/app.config. CRM 2011 Plugin Utilities: This project contains utilities from CRM 2011 plugins. Genera/calculate full name of a custom entity given the first, last and middle name.CUDA driver API: Making the CUDA driver API as simple to use as the runtime API. Almost.DBXMLTransfer: Command line application that: 1) extracts xml returned by a stored procedure to a file and 2) passes xml contained in a file to a stored procedure (which can use it for inserts & updates for example)Dot Generator: This is a project I did to generate numbers using the number of the dots in the number it self to get a visual representation of how big larg numbers areDRYlib.Net: DRY (Don't Repeat Yourself) -- or, in other words, code-reuse -- makes me create this Class Library so I don't have to keep creating the same code here and there. Feel free to use these snippets. I'm releasing them under a permissive license (Apache Public License 2.0). The DRYlib is created using Visual BASIC 2010 Express. What you can find in this DRYlib include, but not limited to: * CRC Hash algorithms * Simple, high-performance Integer extensions * Simple, oft-used Stri...DW.Configurations: DW.Configurations - Enables an easy handling of application settings Please see www.my.libraries.de for more information and documentation.DW.Game.MauMau: Its a MauMau game with the possibility to define all rules DW.Game.Sudoku: It's just a Sudoku gameDW.Interactivity: DW.Interactivity - Brings additional functionalities to WPF controls Please see www.my.libraries.de for more information and documentation.DW.Logging: DW.Logging - Supports an easy working with log files Please see www.my.libraries.de for more information and documentation.DW.Services: DW.Services - Brings standard services Please see www.my.libraries.de for more information and documentation.DW.SharpTools: DW.SharpTools - Brings additional possibilities to C# Please see www.my.libraries.de for more information and documentation.DW.UnitTests: DW.UnitTests - Gives some objects for easy UnitTests Please see www.my.libraries.de for more information and documentation.DW.WPFDev: DW.WPFDev - Some useful objects for developing custom controls and behaviors Please see www.my.libraries.de for more information and documentation.DW.WPFToolkit: DW.WPFToolkit - A custom controls library Please see www.my.libraries.de for more information and documentation.Elucidate: A GUI to drive the SnapRAID command line (All supported platforms): Definition: explain in detail Synonyms: annotate, clarify, clear, clear up, decode, demonstrate, enlighten, exemplify, explicate, expound, get across, illuminate, illustrate, interpret, make perfectly clear This will take on the task of creating a SnapRAID GUI to drive it's command line options, but give a little help and clarification (And logging) to guide the novice user.FixWordProperties for Office 2003, 2007 and 2010: Ken Getz originally wrote the FixWordProperties I believe in 2006. I had a a few extra requirements like the ability to unlock locked files, without passwords, using the office interop model, instead of word and a few more things that I needed in the winter of 2007.Information System Alumni Community: Here is our Internet Programming project. This site help alumni to always keep interact with their friends through this site.They can track his friend name, city, occupation and then interact with them to (whoa..like Social Network right!!).Go check this out int main code samples: Repository for all demos/samples posted at http://blog.r2d2rigo.es/english/LarX - XNA Game Engine: LarX is an XNA Game Engine, 2D and 3D, that uses SunBurn for Rendering, sgMotion for animations, and BEPU for Physics. It enables developers to write quicly AAA games.Membership, Role and Profile Providers for develop, debug, test: These ASP.NET providers for Membership, Roles and Profiles are valuable during development, debugging and testing due to the ease of creating, removing and changing users, user roles, etc. Music search engine: Ilovethismusic.com lets you listen & download music based on your mood, weather, or any type of expression you can think of. Just press Play.NicolasLight: This is for business projectOlympic.Magazine: sport supplements e-shop projectProject Obscura: Project Obscura is a game about to be in development by a group of friends, more data soon...RegularExpressionTest: .SalesManagementSystem: SalesManagementSystemShoozla: Very simple and powerful tool to search for missing covers. It finds album covers automatically and periodically. It uses LASTFM web service (website registration needed). WPF Application developed in C# following a MVVM design pattern.Silverlight Mind Map demo: A Mind Map control library and sample application created in Silveright. Although the library can be useful by itself, the main goal of this project is to server as a demo and reference application for Wiki that shows different Silverlight testing techniques. SketchFlow Template for Windows Phone: The SketchFlow Template for Windows Phone adds a new SketchFlow template for Expression Blend users, making it fast and easy to prototype Windows Phone applications.Smart Blog: Smart Blog ????，??ASP.NET??，?????Entity Framework、MVC 3.0(razor)、WCF???。???????SqlCE?????，????????，????、??。 SQLiteManager (sys_27): SQLiteManager makes for manage SQLite Database. It's developed in C#. (WPF and use MVVM-patern)testing access to TFS: This is a just a trivial set of test files to learn about TFS. I am testing each step of this process and will try to document it for others. Maybe this is obvious to others, but I am still learning TFS.TFS NuGetter: NuGetter is a TFS 2010 Build Activity designed to provide packaging and deployment management to projects destined for a NuGet Gallery.

Read the article

CodePlex Daily Summary for Friday, June 28, 2013

CodePlex Daily Summary for Friday, June 28, 2013Popular ReleasesEsoteric language interpreters collection: WARP, FALSE, Befunge-93, BrainFuck version 1.9: WARP Add factorial source Add brainfuck interpreter source Correct flex number system parse test by using regexes Implement the { operator Implement the } operator Support standard input redirection (so that the , operator reads one line only) The following executes the WARP brainfuck interpreter with a hello world brainfuck program: echo "+++++ +++++[> +++++ ++ > +++++ +++++> +++> + <<<< - ]> ++ .> + .+++++ ++ ..+++ .> ++ .<< +++++ +++++ +++++ .> .+++ .----- -.----- --- .> +.> ."...SharePoint Calendar Helper: 1.0.0.0: The first release, enjoy!WebsiteFilter: WebsiteFilter 1.0: WebsiteFilter Need .net framework4.0ax 2012 Security Privilege generator: xpo privilige generator: While upgrading AX 2009 solutions to AX 2012. I became tired of creating all those privileges. It for every menu item every time the same case; create a view and a maintain privilege. So for all those lazy developer out there, her it is, a privilege Builder. How it works, easy select right mouse on the menu item and you get your privileges.Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Stored Procedure Pager: LYB.NET.SPPager 1.10: check bugs: 1 the total page count of default stored procedure ".LYBPager" always takes error as this: page size: 10 total item count: 100 then total page count should be 10, but last version is 11. 2 update some comments with English forbidding messy code.Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...Compare .NET Objects: Version 1.7.2.0: If you like it, please rate it. :) Performance Improvements Fix for deleted row in a data table Added ability to ignore the collection order Fix for Ignoring by AttributesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.95: update parser to allow for CSS3 calc( function to nest. add recognition of -pponly (Preprocess-Only) switch in AjaxMinManifestTask build task. Fix crashing bug in EXE when processing a manifest file using the -xml switch and an error message needs to be displayed (like a missing input file). Create separate Clean and Bundle build tasks for working with manifest files (AjaxMinManifestCleanTask and AjaxMinBundleTask). Removed the IsCleanOperation from AjaxMinManifestTask -- use AjaxMinMan...VG-Ripper & PG-Ripper: VG-Ripper 2.9.44: changes NEW: Added Support for "ImgChili.net" links FIXED: Auto UpdaterDocument.Editor: 2013.25: What's new for Document.Editor 2013.25: Improved Spell Check support Improved User Interface Minor Bug Fix's, improvements and speed upsWPF Composites: Version 4.3.0: In this Beta release, I broke my code out into two separate projects. There is a core FasterWPF.dll with the minimal required functionality. This can run with only the Aero.dll and the Rx .dll's. Then, I have a FasterWPFExtras .dll that requires and supports the Extended WPF Toolkit™ Community Edition V 1.9.0 (including Xceed DataGrid) and the Thriple .dll. This is for developers who want more . . . Finally, you may notice the other OPTIONAL .dll's available in the download such as the Dyn...Channel9's Absolute Beginner Series: Windows Phone 8: Entire source code for the Channel 9 series, Windows Phone 8 Development for Absolute Beginners.Indent Guides for Visual Studio: Indent Guides v13: ImportantThis release does not support Visual Studio 2010. The latest stable release for VS 2010 is v12.1. Version History Changed in v13 Added page width guide lines Added guide highlighting options Fixed guides appearing over collapsed blocks Fixed guides not appearing in newly opened files Fixed some potential crashes Fixed lines going through pragma statements Various updates for VS 2012 and VS 2013 Removed VS 2010 support Changed in v12.1: Fixed crash when unable to start...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 2.1.0 - Prerelease d: Fluent Ribbon Control Suite 2.1.0 - Prerelease d(supports .NET 3.5, 4.0 and 4.5) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples (not for .NET 3.5) Foundation (Tabs, Groups, Contextual Tabs, Quick Access Toolbar, Backstage) Resizing (ribbon reducing & enlarging principles) Galleries (Gallery in ContextMenu, InRibbonGallery) MVVM (shows how to use this library with Model-View-ViewModel pattern) KeyTips ScreenTips Toolbars ColorGallery *Walkthrough (do...Magick.NET: Magick.NET 6.8.5.1001: Magick.NET compiled against ImageMagick 6.8.5.10. Breaking changes: - MagickNET.Initialize has been made obsolete because the ImageMagick files in the directory are no longer necessary. - MagickGeometry is no longer IDisposable. - Renamed dll's so they include the platform name. - Image profiles can now only be accessed and modified with ImageProfile classes. - Renamed DrawableBase to Drawable. - Removed Args part of PathArc/PathCurvetoArgs/PathQuadraticCurvetoArgs classes. The...New ProjectsAdjusting SharePoint Site Quota PowerShell: PowerShell Script that displays the current space statistics thresholds for the database, site and quota. With this script you change the quota of a site.AndroidOMS: android omsASP.NET????????????: ASP.NET???????????? GlobalProfile ?????ASP.NET???????????。 ?????????????XML??????，?????ASP.NET??IHttpModule???????????，?????HttpRuntime.Cache???????????。 ???ax 2012 Security Privilege generator: While upgrading AX 2009 solutions to AX 2012. I became tired of creating all those privileges.CometDocs.Net: The .Net binding of the CometDocs web API (https://www.cometdocs.com/developer/apiDocumentation)Compositional Signals: This project aims to develop a simple compositional signal processing pipeline for education purposesCRM 2011 Field Data Type Converter: Field data type converter for Microsoft Dynamics CRM 2011CRM Solution CommandLine Helper: CRM Solution Command Line helper provide command line interface to handle CRM solution deployment and automate basic tasks.cursosabado: curso sábado c#Custom Html Helper for Google Maps: This Custom HTML helper let you integrate google maps into your MVC app easiler than EVER!DemoGRAPHICS: This project was demo'ed at the Microsoft Build 2013 Conference as part of "What's new for HTML Developers in Blend for Visual Studio 2013 Preview".DotNetNuke Demo SkinObjects: A collection of skin objects for DotNetNuke designed to make demonstrations easier for people.Excel to Dynamics CRM: Excel to Dynamics CRM for Microsoft Dynamics CRM 2011 makes it easier for the CRM users to upsert (update and/or insert) data from an Excel file.Newbie Open Source Project: math developOpen Parsing Example: here is an example to parse my own fileformatPeople Finder: This is a web proyect aimed to help people to get contact with whom are lost. Initial purpose: Help those who had their kids kidnapped in hospitals.Recovery Solutions at Your Service: Find our some of the most incredible solutions for protecting your backup and data file from corruption, errors and damages.San Francisco Transportation: San Francisco Transportation appSecurity Analysing: Just beginning.Show My Apps: This project aims to build a WPF Application that monitors resources and display them in a beautiful screen, usually seen on TV.TSAsyncModulesExampleApp: TSAsyncModulesExampleApp - ??????????-?????? ????????? ?? TypeScriptUltimate Music Tagger: Ultimate Music Tagger is a powerful, easy and extreme fast tool to reorganize your music libraryUniversal Visualnovel Engine Tools: Universal Visualnovel Engine is a cross-platform AVG Game Engine which supports Windows Phone 8.0 OS.This project hosts the documents and samples of uvengine.WCF Data Service Example: The purpose of this application is to demonstrate the usage of WCF Data Service with Repository patternWebsiteSkip: websiteskip is an open source Web page jump httpmodule component.windowsrtdev: The purpose of this project is to provide a central location for "native" (ie: Win32 - not WinRT) Windows RT development libraries / applications.

Read the article

Hard Disk DRDY error: is it a crash

- by pranjal

I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

Read the article

CodePlex Daily Summary for Monday, February 07, 2011

CodePlex Daily Summary for Monday, February 07, 2011Popular ReleasesRawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...EnhSim: EnhSim 2.3.5 ALPHA: 2.3.5 ALPHAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Removed the chanc...Pyxis 2: Production Release: Pyxis 2.0.0.13 - Full Production Release This release of Pyxis 2 offers you a wide range of features: Launch Applications in their own threads & domains Render alpha-blended icons on the desktop Support for SD & USB drives Online App Store Dynamic & Static IP support Menus & Modals Over a dozen GUI controls File selection dialogs Folder selection dialog Application, Bootloader, and Firmware Updating Update Release Notes Much More!Microsoft All-In-One Code Framework: Sample Browser v2 (CTP Release): Sample Browser v2 (CTP Release) http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=205917MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.Barcode Rendering Framework: 2.2.0.0: Breaking ChangesThe assembly version for many files has changed (all now aligned with the core BRF assembly at version 2.1.0.0) so please update web.config files if you are using the Zen.Barcode.Web/Zen.Barcode.Web.Design assemblies. What's NewSimple barcode image HTTP handler that uses standard HTTP GET and query string parameters for rendering barcode images. Support for embedding barcodes in SSRS 2008 reports. Important SQL Server Reporting Services 2008 InformationFirstly the SSRS CRI...Finestra Virtual Desktops: 1.0: Finally the version 1.0 release! Sorry for the long delay since the last release, but I think that you'll find this release to be really smooth, really stable, and a really great enhancement to Windows. New features include: Windows 7 taskbar integration Major performance and usability improvements Redesigned look and feel New name: Finestra Better automatic updating Much faster full-screen switcher Fixes Windows 7 hotkey collisions by default Updated installerNuclex Framework: R1323: This release is a pure XNA 4.0 release that no longer includes any XNA 3.1 binaries or projects. All x86 assemblies have been compiled targeting the .NET 4.0 Client Profile. Requires either Visual C# 2010 Express or Visual Studio 2010, both with XNA Game Studio 4.0. 3rd party libraries needed to compile and run the source code are included, so everything will compile out of the box. Changes: - Thanks to a generous contribution by Adrian Tsai, the TrueType importer now accepts standard Windo...Community Forums NNTP bridge: Community Forums NNTP Bridge V43: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has added some features / bugfixes: Bugfix: Now supporting multi-line headers in all headers ;) / Thanks to Kai Schätzl for reporting this! Debug output optimized / Added a "Copy to clipboard" button in the debug windowFacebook C# SDK: 5.0.2 (BETA): PLEASE TAKE A FEW MINUTES TO GIVE US SOME FEEDBACK: Facebook C# SDK Survey This is third BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. This release contains some breaking changes. Particularly with authentication. After spending time reviewing the trouble areas that people are having using th...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 3.0.0 for MVC3: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. ChangelogTargeting ASP.NET MVC 3 and .NET 4.0 Additional UpdatePriority options for generating XML sitemaps Allow to specify target on SiteMapTitleAttribute One action with multiple routes and breadcrumbs Medium Trust optimizations Create SiteMapTitleAttribute for setting parent title IntelliSense for your sitemap with MvcSiteMapSchem...patterns & practices SharePoint Guidance: SharePoint Guidance 2010 Hands On Lab: SharePoint Guidance 2010 Hands On Lab consists of six labs: one for logging, one for service location, and four for application setting manager. Each lab takes about 20 minutes to walk through. Each lab consists of a PDF document. You can go through the steps in the doc to create solution and then build/deploy the solution and run the lab. For those of you who wants to save the time, we included the final solution so you can just build/deploy the solution and run the lab.Value Injecter - object(s) to -> object mapper: 2.3: it lets you define your own convention-based matching algorithms (ValueInjections) in order to match up (inject) source values to destination values. inject from multiple sources in one InjectFrom added ConventionInjectionMobile Device Detection and Redirection: 0.1.11.11: Improvements to Beta Release The following changes have been made in version 0.1.11.11: BlackBerry Version 6 devices (such as the 9800 Torch) are now correctly identified with a dedicated handler. Android powered devices are now correctly identified. Minor change to Provider.cs to improve performance and optimise data sent to 51Degrees.mobi if the option is enabled. GC.collect is no longer called at any point. All garbage collection now happens automatically IMPORTANT CHANGES This rele...TweetSharp: TweetSharp v2.0.0.0 - Preview 10: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for trends Added support for Silverlight 4 Elevated WP7 fixes Third Party Library VersionsHammock v1.1.7: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comFacebook Graph Toolkit: Facebook Graph Toolkit 0.7: Version 0.7 updates (2 Feb 2011)new Facebook Graph objects: Link, Note, StatusMessage new publish features: status update, post with link attachment new Graph Api connections in User object: statuses, links, notes internal code path improvement on Api object bug fixed: extra "r" character appears for strings with "\r" symbols in Json Objects bug fixed: error when performing Postback to the same page Tutorial and documentation available at http://fbgraph.computerbeacon.netPhalanger - The PHP Language Compiler for the .NET Framework: 2.0 (February 2011): Next release of Phalanger; again faster, more stable and ready for daily use. Based on many user experiences this release is one more step closer to be perfect compiler and runtime of your old PHP applications; or perfect platform for migrating to .NET. February 2011 release of Phalanger introduces several changes, enhancements and fixes. See complete changelist for all the changes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger....Chemistry Add-in for Word: Chemistry Add-in for Word - Version 1.0: On February 1, 2011, we announced the availability of version 1 of the Chemistry Add-in for Word, as well as the assignment of the open source project to the Outercurve Foundation by Microsoft Research and the University of Cambridge. System RequirementsHardware RequirementsAny computer that can run Office 2007 or Office 2010. Software RequirementsYour computer must have the following software: Any version of Windows that can run Office 2007 or Office 2010, which includes Windows XP SP3 and...Minemapper: Minemapper v0.1.4: Updated mcmap, now supports new block types. Added a Worlds->'View Cache Folder' menu item.StyleCop for ReSharper: StyleCop for ReSharper 5.1.15005.000: Applied patch from rodpl for merging of stylecop setting files with settings in parent folder. Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new Objec...New ProjectsAtari Lynx Emulator: Atari Lynx emulator written in C#BMIcalculator: BMI Calculator for Windows Phone 7.Channel9 Plugin for PlayOn: This is a plugin for use with PlayOn Digital Media Server.cup: cosDEBUG ANALYZER.NET Plugs: Debugging memory dumps using .NET Plugs written in C#Foursquare Venue api: This project allows a user to enter venue information and search foursquare . it will show who is the mayor who is currently at the venue as well as icons for the user . it uses google maps lat and long as well as foursqaure V2 api JSON..G19 Glower: Application for the Logitech G19 keyboard to change the colour of the keyboard as you type. Basic effect is to glow the keyboard more as you type, but there are other modes available. It is also fully customizable and plugin based, so feel free to change it all you wish!GMare: GMare (Game Maker Alternative Room Editor) is a third party room editor for YoYo Game's Game Maker (Supports versions 5 to 8). Offering more robust tools and options to make room editing less cumbersome. GMare is developed in C#, using .NET 2.0, and OpenGL.Hime Parser Generator: Lexer and parser generator for C#. Currently parsing methods are LR(0), LR(1) and LALR(1). Partially implemented parsing methods are GLR(1), GLALR(1), RNGLR(1) and RNGLALR(1). Can be extended for using other parsing methods, including from the LL family.Irrlicht.Net: Irrlicht.Net, is practically what the name says, a wrapper for Irrlicht 1.7.2, written in C#, but should work for other .Net based programming languages. It is, right now in the very early stages, but still you can make something out of it.MapShell: MapShell makes it easy for GIS Administrators to automate repetitive tasks by providing a command-line interface to useful GIS functionality with the consistent syntax and staggering power of PowerShell.MonoStrategy: This project is intended to be an OpenSource remake of one of the best multiplayer realtime strategy games in the world, "The Settlers 3" (Die Siedler 3), with support for all major platforms and mobile devices released under Affero GPL 3. OpenKTV: open source KTV systemRemote Hardware Monitor: Remote Hardware Monitor provides JSON and XML serialised access to data from the Open Hardware Monitor (http://openhardwaremonitor.org/). It is developed in C# using Json.NET for JSON serialisation. SENG 403 Group 6: TBASharePoint Correlation ID View Webpart: Enables a webpart and a ribbon button that allows you to retrieve the information recorded in the ULS log tagged with a specific correlation ID. This makes it much easier for SharePoint developers to retrieve the log messages for a specific correlation token.SharePoint OM Explorer: Explorer SharePoint 2010 under the covers with a set of connected and connectable web parts with an underlying vision to make it easy to: - View site hiearchy - See all object model data for sites, lists, content types, event receivers, etc - Easily view customized bits vs. OOB.System Center Service Manager Facade: This project is c# facade API around SCSM objects using T4 templates and codeTemporary internal server sample for your C# application: CSISS is a sample for you as a C# developer. It explains with an example how to create a virtual, temporary "server" in a class.TestSGB2: This is a test upload2Tiff Splitter: A simple WinForms app that that opens a multi-page tiff file and saves all pages as individual tiff files. The multi-page tiff can be opened via open file dialog, or dragged in.Time Tracker for Windows Phone 7: This is a sample time tracker application created by the members of the LetsXNA !! linked in user group. See LetsXNA.Org for more details. You are welcome to contribute by joining the linked in group and the registering as a developer on codeplex. Lets build a great time tracker!TraceLight: <project name> TraceLight ray tracer </project name> <programming language> C# </programming language>

Read the article

CodePlex Daily Summary for Wednesday, November 21, 2012

CodePlex Daily Summary for Wednesday, November 21, 2012Popular ReleasesImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.Metodología General Ajustada - MGA: 03.05.05: Cambios John: Se modificó el Procedimiento Alamacenado PROF03ObjetivoProductoConsultarIdF03 que no incluía los campos de IdUnidadMedida y UnidadMedida, lo que generaba error en la capa de datos al leer estos campos (PasarDataSetAPROF03ObjetivoProductoInfo) y terminaba devolviendo NULL en los registros, esto no dejaba la información en la Exportación y por ende en la Importación no subían los Productos. Generación de instaladores. Soporte técnico por correo electrónico, telefónico y en sitio.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...VidCoder: 1.4.6 Beta: Brought back the x264 advanced options panel due to popular demand. Thank you for all the feedback. x264 Preset/Profile/Tune/Level has been moved back to the Video tab, along with a copy of the "extra options" string. Added Fast Decode and Zero Latency checkboxes to support multiple Tunes. Added cropping option "None". Audio bitrates that are incompatible with the encoder (such as MP3 > 320 kbps) are no longer preset on the list. Fixed crash on opening VidCoder after de-selecting "re...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????（◇?◆:）。 -???????????????????RecoverPropertiesFromJObject????（〓?〓、????、??、Vian_Pan）。 -????????????，?????????????，???SelectedValueArray???????（sam.chang）。 -??Alert.Show???????????（swtseaman）。 -???????????????，??Icon??IconUrl????（swtseaman）。 -?????????TimePicker（??）。 -?????????，??/res.axd?css=blue.css&v=1。 -????????，?????????????，???????。 -????MenuCheckBox（???????）。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...fastJSON: v2.0.10: - added MonoDroid projectNew Projects1121codeplex01: Today's task is to test portal on JapaneseAgileToDo: a to do list use wpf ef sqlce!Applay: Applay is a library that allows you to wrap authorization and validation around the services of your application layer by using a dynamic proxy.ArunimaErp: Enterprise Resource Planning Software for Arunima GroupBootCMS: BootCMS makes webdevelopment easy.codeplex01: I need go out for a whileCoding4Fun's Maelstrom: Introduced at //build/ 2012, Maelstrom is Coding4Fun's latest creation. Step up to the podium and battle against your opponent in full-on stereoscopic 3D!CTCS Project 2012: 11/21/2012 @ svn repository ctodo: TODO List Management Librarydeploy-with-ease: One-click deployment tool based on DrobBox files hostingDesign Resources .NET: D-R.NET is a set of pre-built implementations of oft-recurring application designs. D-R.NET saves considerable time and money in building user-focused applications: from basic to complex. DnfWeb: dnf??Dr.Peng: dr.peng ????????。DriveKeepAlive: Managed .NET service intended to keep external hard drives "awake" for immediate access. Developed in C# with Visual Studio 2008Ecommerce Platform: Ecommerce PlatformEventManagerReset: Project created for Reset meetings.FaceComparerDistributed: project of face compare distributed versionFileSystemExplorerExample: WPF MVVM Sample applicationFinlogiK ReSharper Contrib: FinlogiK ReSharper Contrib is a plugin for ReSharper 5.1 which adds code cleanup and inspection options for static qualifiers.Gestione Lampade Votive: Gestione dei canoni annuali dei loculi cimiteriali, con stampa di comunicazioni ai contribuenti e dei bollettini di conto corrente postale (a due o tre cedole).GI_PII: HABA BABA?GIV_P2: second projectHex o'clock: Projekt kolorowego zegara.IISProcessScheduler: Schedule processes from within IIS.Image Tagger & Resizer: Resize, and text in the lower right of picture with i.e. copyright information.IT Kohvik: ITK cafe school project.jean1121codeplex01: goodKooboo3 Helper: It's a developer tutorial code for kooboo cms v3. http://kooboo.codeplex.comMAVI: mobile application for the visually impaired: bill recognition & tag and recognize objects based on a specific stickerMecanismos de Segurança Interoperáveis para Serviços Web: Esse projeto pretende desenvolver um framework que forneça requisitos de segurança de forma interoperável através de Serviços Web. Metro UI For Windows Forms: Provides a set of controls and form templates for designing user interfaces based on a similar minimalist metro style. For those who love Windows Forms.NHSmartBootstrapper: In a "fast-changing" world, your LoB application needs to be ready to change as well. The usage of NHibernate Listeners together with smart application bootstrapping, even in a complex scenario, can lead to extensible and new-feature-ready applications. Office Add-In Monitor: Office Add-in Monitor protects add-ins from being disabled.Orchard Responsive Theme Machine: A responsive version of the Orchard CMS "Theme Machine" which is commonly used as a starting point for building custom themes. Supports many resolutions.Orchard Simple Contact Form: An Orchard CMS module that provides a simple contact form that sends an email. It can be used as either a content part or widget.Peon War: Peon war is a game where peons are fighting.Project Files Linker (VS Add-In): PFL project is used to generate multiple projects with links to the same files to achieve projects for different .NET FW versions.Quibbler - Universal News Reader: Quibbler is a product designed and developed by Indigo Architects. Quibbler is a desktop application which runs on user's machine and provides a intuitive user interface for reading news in offline mode. Quibbler is developed in WPF (.Net 3.5).Samcrypt: .SenchaTest: SenchaTestShared Genomics Project - Workbench Codebase: The Shared Genomics workbench enables a diverse user group of researchers to explore the associations between genetic and other factors in their datasets. It provides a graphical user interface to the analysis functions published in a sister Codeplex project i.e. MPI Codebase.SharePoint 2013 FBA Pack: This is the home of the SharePoint 2013 FBA Pack. The FBA Pack for SharePoint 2013 is currently in development and is coming soon.SharePoint Term Store PowerShell Backup & Restore Scripts: This project is focused on development of PowerShell script tools for backup and restore of SharePoint Managed Metadata service application Term Store taxonomy.SharpPlanets: A simple game completely designed and written in C#, inspired by JPlanets.SpaceShooter: A small hobbyist game. It is similar to the 2D Arcade shooter games.Stretched Background Image jQuery plugin: jQuery plugin for adding a stretched background image for any element in a web page. Uses an absolutely positioned image at z-index -1.Stsadm Templates for Visual Studio: The Stsadm Templates for Visual Studio 2005 and 2008 support you in making command extensions for SharePoint's commnand line tool stsadm.exe.SwissPost EasyTrack API: The SwissPost EasyTrack API allows you to track your parcels or letters everytime and in every application.System.Threading.Joins: The Joins project provides asynchronous concurrency semantics based on join calculus and modeled after the Microsoft Research C? (C Omega) project.T nagu Tetris: Meie versioon tuntud mängust tetris.testdd11202012tfs01: juktestddhg11202012hg01: stesttom11202012git02: fdsfdstesttom11202012hg01: gfdTetrissimus: Tetrissimus is an open source "Tetris" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.Thrift Client .NET for WinRT (Windows Store Apps): thrift .net client for WinRT applicationTwitter Bootstrap for SharePoint: A Masterpage for SharePoint 2010 including the twitter bootstrap front-end frameworkTX Spell .NET ActiveX Package: TX Spell .NET ActiveX Package enables you to add high-performance spell checking capabilities to your VB6 applications.USB ACCELEROMETER: This project is a test demo for usb accelerometer. Application plays music (mp3 file) while usb acc gives high values from its coordinate between interval.VfaAccoutApps: Cash Payment Application of Vf AsiaVisualPoint Use PowerPoint inside Visual Studio: VisualPoint lets you show PowerPoint presentations from inside Visual Studio. Future release will automate walkthroughs and presentations.VS2010 Rc1 Fix: Illustrates a fix for working with the ASAP.NET Wizard control with VS2010 RC1WebSite.Request: WebSite.Request launch web request (via XMLHTTP) on website. Use, for example, to make initial request to sharepoint URL and escape "slow first request" problem.WPF Checked ListBox: This is simple implementation of WPF Checked ListBoxWPortal: doing nothing. that's it. i just want to use the subversion management. XNA Capture the Flag for the Microsoft Zune: Capture the Flag is a 2d Capture the flag game made for the Zune platform using XNA 3.0 CTP. Players choose to join or start a network session in the main menu. When in game, the player uses left or right on the DPad to choose the team on which to play with. Once sides have been chosen the party leader presses the center button on the Dpad to start the game. Teams switch between offense and defense for a total of 4 rounds in each game. When the game is over the party leader simply presses th...XPS Indexer: Xps file indexing for Google Desktop

Read the article

Internet doesn't work by default

- by Adam Martinez

After upgrading to Precise, I am required to run 'sudo dhclient eth0' in a terminal in order to get the internet to work. Everything worked perfectly fine on Oneiric, so It's really puzzling me. I'm thinking it could possibly be something with the kernel, but who knows. Output of dmesg: [ 0.247891] system 00:01: [io 0x0290-0x030f] has been reserved [ 0.247896] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.247901] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.247908] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.247931] pnp 00:02: [dma 4] [ 0.247935] pnp 00:02: [io 0x0000-0x000f] [ 0.247939] pnp 00:02: [io 0x0080-0x0090] [ 0.247943] pnp 00:02: [io 0x0094-0x009f] [ 0.247947] pnp 00:02: [io 0x00c0-0x00df] [ 0.248033] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.248125] pnp 00:03: [io 0x0070-0x0073] [ 0.248187] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.248205] pnp 00:04: [io 0x0061] [ 0.248260] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.248277] pnp 00:05: [io 0x00f0-0x00ff] [ 0.248292] pnp 00:05: [irq 13] [ 0.248348] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.248583] pnp 00:06: [io 0x03f0-0x03f5] [ 0.248588] pnp 00:06: [io 0x03f7] [ 0.248597] pnp 00:06: [irq 6] [ 0.248601] pnp 00:06: [dma 2] [ 0.248690] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.248998] pnp 00:07: [io 0x03f8-0x03ff] [ 0.249008] pnp 00:07: [irq 4] [ 0.249122] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.249479] pnp 00:08: [io 0x0400-0x04bf] [ 0.249584] system 00:08: [io 0x0400-0x04bf] has been reserved [ 0.249591] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.249628] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.249690] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) [ 0.250049] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.250167] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.250173] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.250302] pnp 00:0b: [mem 0x000f0000-0x000fffff] [ 0.250307] pnp 00:0b: [mem 0x7ff00000-0x7fffffff] [ 0.250311] pnp 00:0b: [mem 0xfed00000-0xfed000ff] [ 0.250316] pnp 00:0b: [mem 0x0000046e-0x0000056d] [ 0.250320] pnp 00:0b: [mem 0x7fee0000-0x7fefffff] [ 0.250324] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.250328] pnp 00:0b: [mem 0x00100000-0x7fedffff] [ 0.250332] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.250336] pnp 00:0b: [mem 0xfed14000-0xfed1dfff] [ 0.250341] pnp 00:0b: [mem 0xfed20000-0xfed9ffff] [ 0.250345] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.250349] pnp 00:0b: [mem 0xffb00000-0xffb7ffff] [ 0.250353] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.250357] pnp 00:0b: [mem 0x000e0000-0x000effff] [ 0.250409] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.250419] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.250430] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.250524] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.250530] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved [ 0.250536] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.250541] system 00:0b: [mem 0x7fee0000-0x7fefffff] could not be reserved [ 0.250547] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.250552] system 00:0b: [mem 0x00100000-0x7fedffff] could not be reserved [ 0.250558] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.250563] system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved [ 0.250568] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.250574] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.250579] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.250585] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.250590] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved [ 0.250596] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.250614] pnp: PnP ACPI: found 12 devices [ 0.250617] ACPI: ACPI bus type pnp unregistered [ 0.250624] PnPBIOS: Disabled by ACPI PNP [ 0.288725] PCI: max bus depth: 1 pci_try_num: 2 [ 0.288786] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref] [ 0.288792] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.288797] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.288804] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.288811] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.288820] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.288825] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.288833] pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.288840] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.288851] pci 0000:03:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref] [ 0.288856] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.288861] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.288869] pci 0000:00:1c.4: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.288876] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.288887] pci 0000:04:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.288891] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.288897] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff] [ 0.288904] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.288911] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.288920] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.288926] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.288933] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.288940] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.288971] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.288979] pci 0000:00:01.0: setting latency timer to 64 [ 0.288991] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.288998] pci 0000:00:1c.0: setting latency timer to 64 [ 0.289008] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.289014] pci 0000:00:1c.4: setting latency timer to 64 [ 0.289030] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.289037] pci 0000:00:1c.5: setting latency timer to 64 [ 0.289047] pci 0000:00:1e.0: setting latency timer to 64 [ 0.289054] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.289058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.289063] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.289067] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.289072] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.289077] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.289081] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.289086] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.289092] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.289096] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.289101] pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.289106] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.289110] pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.289115] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.289120] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.289124] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.289129] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.289134] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.289138] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.289143] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.289148] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.289152] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.289157] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.289161] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.289166] pci_bus 0000:05: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.289233] NET: Registered protocol family 2 [ 0.289360] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.289754] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.290351] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.290670] TCP: Hash tables configured (established 131072 bind 65536) [ 0.290674] TCP reno registered [ 0.290680] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.290703] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.290868] NET: Registered protocol family 1 [ 0.290911] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.290932] pci 0000:00:1a.0: PCI INT A disabled [ 0.290956] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.290975] pci 0000:00:1a.1: PCI INT B disabled [ 0.290992] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.291012] pci 0000:00:1a.2: PCI INT D disabled [ 0.291031] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.291068] pci 0000:00:1a.7: PCI INT C disabled [ 0.291104] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.291123] pci 0000:00:1d.0: PCI INT A disabled [ 0.291135] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.291155] pci 0000:00:1d.1: PCI INT B disabled [ 0.291166] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.291185] pci 0000:00:1d.2: PCI INT C disabled [ 0.291198] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.291219] pci 0000:00:1d.7: PCI INT A disabled [ 0.291258] pci 0000:01:00.0: Boot video device [ 0.291273] PCI: CLS 4 bytes, default 64 [ 0.291857] audit: initializing netlink socket (disabled) [ 0.291876] type=2000 audit(1336753420.284:1): initialized [ 0.337724] highmem bounce pool size: 64 pages [ 0.337734] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.349241] VFS: Disk quotas dquot_6.5.2 [ 0.349365] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.350418] fuse init (API version 7.17) [ 0.350611] msgmni has been set to 1685 [ 0.351179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.351229] io scheduler noop registered [ 0.351233] io scheduler deadline registered [ 0.351247] io scheduler cfq registered (default) [ 0.351450] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.351502] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.351585] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.351639] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.351728] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.351779] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.351875] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.351927] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.352094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.352143] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.352311] intel_idle: MWAIT substates: 0x22220 [ 0.352315] intel_idle: does not run on family 6 model 23 [ 0.352446] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.352455] ACPI: Power Button [PWRB] [ 0.352556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.352562] ACPI: Power Button [PWRF] [ 0.352650] ACPI: Fan [FAN] (on) [ 0.355667] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.355673] ACPI: Thermal Zone [THRM] (26 C) [ 0.355750] ERST: Table is not found! [ 0.355753] GHES: HEST is not enabled! [ 0.355898] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.376332] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.376582] isapnp: Scanning for PnP cards... [ 0.709133] Freeing initrd memory: 13792k freed [ 0.729743] isapnp: No Plug & Play device found [ 0.816786] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.832385] Linux agpgart interface v0.103 [ 0.835605] brd: module loaded [ 0.837138] loop: module loaded [ 0.837452] ata_piix 0000:00:1f.2: version 2.13 [ 0.837473] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.837480] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.837546] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.838099] scsi0 : ata_piix [ 0.838253] scsi1 : ata_piix [ 0.839183] ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19 [ 0.839192] ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19 [ 0.839239] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.839246] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.839300] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.839708] scsi2 : ata_piix [ 0.839841] scsi3 : ata_piix [ 0.840301] ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19 [ 0.840308] ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19 [ 0.840429] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.840467] pata_acpi 0000:03:00.0: setting latency timer to 64 [ 0.840488] pata_acpi 0000:03:00.0: PCI INT A disabled [ 0.841159] Fixed MDIO Bus: probed [ 0.841205] tun: Universal TUN/TAP device driver, 1.6 [ 0.841210] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.841322] PPP generic driver version 2.4.2 [ 0.841515] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.841542] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.841567] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.841573] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.841658] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.845582] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported [ 0.845610] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 [ 0.860022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.860264] hub 1-0:1.0: USB hub found [ 0.860272] hub 1-0:1.0: 6 ports detected [ 0.860404] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.860424] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.860430] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.860512] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.864413] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported [ 0.864438] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 [ 0.880021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.880227] hub 2-0:1.0: USB hub found [ 0.880234] hub 2-0:1.0: 6 ports detected [ 0.880369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.880396] uhci_hcd: USB Universal Host Controller Interface driver [ 0.880431] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.880443] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.880449] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.880529] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.880574] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.880803] hub 3-0:1.0: USB hub found [ 0.880811] hub 3-0:1.0: 2 ports detected [ 0.880929] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.880940] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.880946] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.881039] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.881081] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.881302] hub 4-0:1.0: USB hub found [ 0.881310] hub 4-0:1.0: 2 ports detected [ 0.881427] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.881438] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.881443] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.881523] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.881551] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00 [ 0.881774] hub 5-0:1.0: USB hub found [ 0.881781] hub 5-0:1.0: 2 ports detected [ 0.881899] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.881910] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.881915] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.881993] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.882021] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.882244] hub 6-0:1.0: USB hub found [ 0.882252] hub 6-0:1.0: 2 ports detected [ 0.882370] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.882381] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.882386] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.882467] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.882495] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.882735] hub 7-0:1.0: USB hub found [ 0.882742] hub 7-0:1.0: 2 ports detected [ 0.882858] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.882869] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.882875] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.882954] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.882982] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.883205] hub 8-0:1.0: USB hub found [ 0.883213] hub 8-0:1.0: 2 ports detected [ 0.883435] usbcore: registered new interface driver libusual [ 0.883535] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.883926] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.883936] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.884187] mousedev: PS/2 mouse device common for all mice [ 0.884433] rtc_cmos 00:03: RTC can wake from S4 [ 0.884582] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.884612] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.884719] device-mapper: uevent: version 1.0.3 [ 0.884854] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 0.884917] EISA: Probing bus 0 at eisa.0 [ 0.884921] EISA: Cannot allocate resource for mainboard [ 0.884925] Cannot allocate resource for EISA slot 1 [ 0.884929] Cannot allocate resource for EISA slot 2 [ 0.884932] Cannot allocate resource for EISA slot 3 [ 0.884936] Cannot allocate resource for EISA slot 4 [ 0.884940] Cannot allocate resource for EISA slot 5 [ 0.884943] Cannot allocate resource for EISA slot 6 [ 0.884947] Cannot allocate resource for EISA slot 7 [ 0.884950] Cannot allocate resource for EISA slot 8 [ 0.884954] EISA: Detected 0 cards. [ 0.884969] cpufreq-nforce2: No nForce2 chipset. [ 0.884973] cpuidle: using governor ladder [ 0.884976] cpuidle: using governor menu [ 0.884980] EFI Variables Facility v0.08 2004-May-17 [ 0.885476] TCP cubic registered [ 0.885708] NET: Registered protocol family 10 [ 0.886771] NET: Registered protocol family 17 [ 0.886799] Registering the dns_resolver key type [ 0.886837] Using IPI No-Shortcut mode [ 0.887028] PM: Hibernation image not present or could not be loaded. [ 0.887047] registered taskstats version 1 [ 0.902579] Magic number: 12:339:388 [ 0.902592] usb usb6: hash matches [ 0.902687] rtc_cmos 00:03: setting system clock to 2012-05-11 16:23:41 UTC (1336753421) [ 0.903185] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.903189] EDD information not available. [ 1.170710] ata3: SATA link down (SStatus 0 SControl 300) [ 1.181439] ata4: SATA link down (SStatus 0 SControl 300) [ 1.288020] Refined TSC clocksource calibration: 2499.999 MHz. [ 1.288028] Switching to clocksource tsc [ 1.292016] usb 1-5: new high-speed USB device number 3 using ehci_hcd [ 1.486745] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.486762] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.640115] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.640130] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.648342] ata1.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 1.648348] ata1.00: 490234752 sectors, multi 0: LBA48 [ 1.664325] ata1.00: configured for UDMA/133 [ 1.664531] scsi 0:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 1.664745] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 1.664809] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.664838] sd 0:0:0:0: [sda] Write Protect is off [ 1.664843] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.664884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.691699] sda: sda1 sda2 sda3 sda4 [ 1.692348] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.692461] Freeing unused kernel memory: 740k freed [ 1.692820] Write protecting the kernel text: 5828k [ 1.692851] Write protecting the kernel read-only data: 2376k [ 1.692854] NX-protecting the kernel data: 4412k [ 1.723980] udevd[92]: starting version 175 [ 1.865339] Floppy drive(s): fd0 is 1.44M [ 1.865429] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.865478] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 1.867875] sky2: driver version 1.30 [ 1.867926] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.867942] sky2 0000:04:00.0: setting latency timer to 64 [ 1.867979] sky2 0000:04:00.0: Yukon-2 EC chip revision 2 [ 1.868111] sky2 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.868174] scsi4 : pata_jmicron [ 1.869802] sky2 0000:04:00.0: eth0: addr 00:01:29:a4:16:0a [ 1.869828] scsi5 : pata_jmicron [ 1.869943] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16 [ 1.869949] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16 [ 1.880053] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 1.884052] FDC 0 is a post-1991 82077 [ 2.032611] ata5.00: ATAPI: _NEC DVD+/-RW ND-3450A, 103C, max UDMA/33 [ 2.048585] ata5.00: configured for UDMA/33 [ 2.049777] scsi 4:0:0:0: CD-ROM _NEC DVD+-RW ND-3450A 103C PQ: 0 ANSI: 5 [ 2.051048] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.051054] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.051283] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.051483] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.079838] usbcore: registered new interface driver usbhid [ 2.079844] usbhid: USB HID core driver [ 2.236660] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.150230] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.177342] udevd[333]: starting version 175 [ 12.195524] Adding 417684k swap on /dev/sda2. Priority:-1 extents:1 across:417684k [ 12.278032] lp: driver loaded but no devices found [ 12.516456] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input2 [ 12.520297] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input2 [ 12.520753] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:1a.1-1:1 [ 12.523286] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input3 [ 12.524439] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1a.1-1:2 [ 12.545746] type=1400 audit(1336771433.137:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=502 comm="apparmor_parser" [ 12.546574] type=1400 audit(1336771433.137:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser" [ 12.547034] type=1400 audit(1336771433.137:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser" [ 12.626869] Linux video capture interface: v2.00 [ 12.649104] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081a) [ 12.668665] input: UVC Camera (046d:081a) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input4 [ 12.668909] usbcore: registered new interface driver uvcvideo [ 12.668914] USB Video Class driver (1.1.1) [ 12.697645] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.697721] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 12.697760] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 12.706772] nvidia: module license 'NVIDIA' taints kernel. [ 12.706778] Disabling lock debugging due to kernel taint [ 12.735428] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.350252] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.350267] nvidia 0000:01:00.0: setting latency timer to 64 [ 13.350275] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 13.351464] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012 [ 13.356785] hda_codec: ALC889A: BIOS auto-probing. [ 13.357267] init: failsafe main process (658) killed by TERM signal [ 13.372756] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 13.373173] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 13.373568] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 13.373954] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 13.374339] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 13.374715] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 13.375109] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 13.375724] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 13.475252] type=1400 audit(1336771434.065:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=735 comm="apparmor_parser" [ 13.477026] type=1400 audit(1336771434.069:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser" [ 13.477695] type=1400 audit(1336771434.069:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser" [ 13.479048] type=1400 audit(1336771434.069:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=734 comm="apparmor_parser" [ 13.488994] type=1400 audit(1336771434.081:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=738 comm="apparmor_parser" [ 13.489972] type=1400 audit(1336771434.081:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=738 comm="apparmor_parser" [ 13.

Search Results

Search found 13135 results on 526 pages for 'actor model'.

Page 519/526 | < Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526 | Next Page >

- by sam

- by shiju

- by Stephen Walther

- by MasterRoot24

- by DaveWolf

- by mseika

- by shiju

- by Ralf Westphal

- by thangchung

- by DaveCol

- by Prabu

- by Rick Koshi

- by pranjal

- by Adam Martinez

< Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526 | Next Page >