Search Results

Search found 14175 results on 567 pages for 'home entertainment'.

Page 519/567 | < Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >

• Sparse virtual machine disk image resizing weirdness?

  - by Matt H

  I have a partitioned virtual machine disk image created by vmware. What I want to do is resize that by 10GB. The file size is showing as 64424509440. Or 60GB. So I ran this: dd if=/dev/zero of=./win7.img seek=146800640 count=0 It ran without errors and I can verify the new size is in fact 75161927680 bytes or 70GB. This is where it gets a little odd. I started the guest domain in xen which is a Windows 7 enterprise machine. What I was expecting to see in diskmgmt.msc is 2 partitions. 1 system partition at the start of around 100MB and near 60GB partition (which is C drive) followed by around 10GB of free space. Actually what I saw was a 70GB partition!?! That confused me... so I decided to run the Check Disk which when you set it on the C drive it asks you to reboot so it'll run on boot. So I did that and during the boot it ran the checks. It got all the way through stage 3 and didn't show any errors at all. Looked at the partitions in disk manager and now C drive has shrunk back to 60GB and there is no free space. What gives? Ok, I thought I'd try mounting it under Dom0 and examining it with fdisk. This is what I get when mounted sudo xl block-attach 0 tap:aio:/home/xen/vms/otoy_v1202-xen.img xvda w sudo fdisk -l /dev/xvda Disk /dev/xvda: 64.4 GB, 64424509440 bytes 255 heads, 63 sectors/track, 7832 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x582dfc96 Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/xvda2 13 7833 62810112 7 HPFS/NTFS Note the cylinder boundary comment. When I run sudo cfdisk /dev/xvda I get: FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder Press any key to exit cfdisk So I guess this is a bigger problem than first thought. How can I fix this? EDIT: Oops, the cylinder boundary thing is not a problem at all since disks have used LBA etc. So that threw me for a moment... still the problem exists... Now this output looks a little different. sudo sfdisk -uS -l /dev/xvda Disk /dev/xvda: 7832 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/xvda1 * 2048 206847 204800 7 HPFS/NTFS /dev/xvda2 206848 125827071 125620224 7 HPFS/NTFS /dev/xvda3 0 - 0 0 Empty /dev/xvda4 0 - 0 0 Empty BTW: I do have a backup of the image so if you help me mess it up that's ok. EDIT: sudo parted /dev/xvda print free Model: Xen Virtual Block Device (xvd) Disk /dev/xvda: 64.4GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 32.3kB 1049kB 1016kB Free Space 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 64.4GB 64.3GB primary ntfs 64.4GB 64.4GB 1049kB Free Space Cool. Linux is showing free space is 10GB which is what I expect. The problem is windows isn't seeing this?

  Read the article

• PASS: International Travels

  - by Bill Graziano

  Nihao!  One of the largest changes PASS is going through is the the expansion outside the US and Canada.  We’ve had international chapters and events in Europe since the early 2000’s.  But nothing on the scale we’re seeing now.  Since January 1st there have been 18 SQL Saturday events outside North America and 19 events in North America.  We hope to have three international SQLRally events outside the US in FY13 (budget willing).  I don’t know the exact percentage of chapters outside the US but it’s got be 50% or higher. We recently started an effort to remake the Board to better reflect the growing global face of PASS.  This involves assigning some Board seats to geographic regions.  You can ask questions about this in our feedback forum, participate in a Twitter chat or ask questions directly of Board members.  You can email me at if you’d like to ask a question directly.  We’re doing this very slowly and deliberately in hopes that a long communication cycle gives us a chance to address all the issues that our members will raise. After the Summit we passed a budget exception allocating an extra $20,000 for Board members to travel to local events.  I think it’s important for Board members to visit new areas and talk to more of our members.  I sent out an email asking where people had attended events outside their home city.  Here’s the list I got back: Albuquerque, Amsterdam, Boston, Brisbane, Chicago, Colorado Springs, Columbus, Dallas, Houston, Jacksonville, Las Vegas, London, Louisville, Minneapolis, New York City, Orange County, Orlando, Pensacola, Perth, Philadelphia, Phoenix, Redmond, Seattle, Silicon Valley, Sydney, Tampa Bay, Vancouver, Washington DC and Wellington.  (Disclaimer: Some of this travel was paid for by employers or Board members themselves.  Some of this travel may have been completed before the Summit.  That’s still one heck of a list!) The last SQL Saturday event this fiscal year is SQL Saturday Shanghai.  And that’s one I’m attending.  This is our first event in China and is being put on in cooperation with the local Microsoft office.  Hopefully this event will be the start of a growing community in China that includes chapters, SQL Saturdays and maybe a SQLRally or two in the future.  I’m excited to speak with people that are just starting down this path and watching this community grow. I encourage you to visit the PASS Global Growth site and read through the material there.  This is the biggest change we’ve made to our governance since I’ve been on the Board.  You need to understand how it affects you and how it affects the organization. And wish me luck on the 15 hour flight to Shanghai on Friday afternoon.  Rob Farley flies from Australia to the US for PASS events multiple times per year and I don’t know how he does it so often.  I think one of these is going to wipe me out.  (And Nihao (knee-how) is Chinese for Hello.)

  Read the article

• Convert old AVI files to a modern format

  - by iWerner

  Hi, we have a collection of old home videos that were saved in AVI format a long time ago. I want to convert these files to a more modern format because the Totem Movie Player that comes with Ubuntu 10.4 seems to be the only program capable of playing them. The files seem to be encoded with a MJPEG codec, and playing them in VLC or Windows Media Player plays only the sound but there is no video. Avidemux was able to open the files, but the quality of the video is severely degraded: The video skips frames and is interlaced (it's not interlaced when playing it in Totem). Neither ffmpeg nor mencoder seems to be able to read the video stream. mencoder reports that it is using ffmpeg's codec. Here's a section from its output: ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family [mjpeg @ 0x92a7260]mjpeg: using external huffman table [mjpeg @ 0x92a7260]mjpeg: error using external huffman table, switching back to internal Unsupported PixelFormat -1 Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG) while running ffmpeg produces the following: $ ffmpeg -i input.avi output.avi FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Mar 4 2010 12:35:30, gcc: 4.4.3 [avi @ 0x87952c0]non-interleaved AVI Input #0, avi, from 'input.avi': Duration: 00:00:15.24, start: 0.000000, bitrate: 22447 kb/s Stream #0.0: Video: mjpeg, yuvj422p, 720x544, 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: pcm_s16le, 44100 Hz, stereo, s16, 1411 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 720x544, q=2-31, 200 kb/s, 90k tbn, 25 tbc Stream #0.1: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 0 fps= 0 q=0.0 Lsize= 143kB time=15.23 bitrate= 76.9kbits/s video:0kB audio:119kB global headers:0kB muxing overhead 20.101777% So the problem is that output does not contain any video, as evidenced by the video:0kB at the end. In all of the above cases the audio comes out fine. So my question is: What can I do to convert these files to a more modern format with more modern codecs?

  Read the article

• JFall 2012

  - by Geertjan

  JFall 2012 was over far too soon! Seven tracks going on simultaneously in a great location, with many artifacts reminding me of JavaOne, and nice snacks and drinks afterwards. The day started, as such things always do, with a keynote. Thanks to @royvanrijn for the photo below, I didn't take any myself and without a picture this report might have been too dry: What you see above is Steve Chin riding into the keynote hall on his NightHacking bike. The keynote was interesting, I can't be too complimentary about it, since I was part of it myself. Bert Ertman introduced the day and then Steve Chin took over, together with Sharat Chander, Tom Eugelink, Timon Veenstra, and myself. We had a strict choreography for the keynote, one that would ensure a lot of variation and some unexpected surprises, such as Steve being thrown off the stage a few times by Bert because of mentioning JavaOne too many times, rather than the clearly much cooler JFall. Steve talked about JavaOne and the direction Java is headed in, Sharat talked about JavaME and embedded devices, Steve and Tom did a demo involving JavaFX, I did a Project Easel demo, and Timon from Ordina talked about his Duke's Choice Award winning AgroSense project. I think the Project Easel demo (which I repeated later in a screencast for Parleys arranged by Eugene Boogaart) came across well and several people I spoke to especially like the roundtrip/bi-directional work that can be done, from browser to IDE and back again, very simply and intuitively. (In a long conversation on the drive back home afterwards, the scenario of a designer laying out the UI in HTML and then handing the HTML to a developer for back-end work, a developer who would then find it convenient to open the HTML in a browser and quickly navigate from the browser to the resources within the IDE, was discussed and considered to be extremely interesting and worth considering adopting NetBeans for, for no other reason than that.) Later I attended a session by David Delabassee on Java EE 7, Hans Dockter on Gradle, and Sander Mak on cross-build injection attacks. I was sorry to have missed Martijn Verburg's session, which sounded like it was really fantastic, among others, such as Gerrit Grunwald. I did a session too, entitled "Unlocking the Java EE 6 Platform", which was very well attended, pretty much a full room, and the demo went very smoothly. I talked to many people, e.g., a long time with Hans Dockter about how cool Gradle is and how great the Gradle/NetBeans plugin is turning out to be. I also had a long conversation (and did a demo) with Chris Chedgey, from Structure101, after his session, which was incredibly well attended; very interesting how popular modularity is. I met several people for the first time, as well as some colleagues from past places I've worked at. All in all, it was a great conference, unfortunately too short, which was very well attended (clearly over 1000) people, with several international speakers, as well as international attendees such as Mattias Karlsson, Sweden JUG leader. And, unsurprisingly, I came across NetBeans Platform applications again, none of which I had ever heard of before. In each case, "our fat client application" was mentioned in passing, never as a main application, and never in a context where there are plans for the application to be migrated to the web or mobile, simply because doing so makes no business sense at all. Great times at JFall, looking forward to meeting with some of the people I met again soon.

  Read the article

• Rolling Along: PASS Board Year 2, Q2

  - by Denise McInerney

  Eighteen months into my time as a PASS Director I’m especially proud of what the Virtual Chapters have accomplished and want to share that progress with you. I'm also pleased that the organization has invested more resources to support the VCs. In this quarter I got to attend two conferences and meet more members of the SQL community. Virtual Chapters In the first six months of 2013 VCs have hosted more than 50 webinars, offering free technical education to over 6200 attendees. This is a great benefit to PASS members; thanks to the VC leaders, volunteers and speakers who contribute their time to produce these events. The Performance VC held their “Summer Performance Palooza”, an event featuring eight back-to-back sessions. Links to the session recordings can be found on the VCs web site. The new webinar platform, GoToWebinar, has been rolled out to all the VCs. This is a more stable, scalable platform and represents an important investment into the future of the VCs. A few new VCs are in the planning stages, including one focused on Security and one for Russian speakers. Visit the Virtual Chapter home page to sign up for the chapters that interest you. Each Virtual Chapter is offering a discount code for PASS Summit 2013. Be sure to ask your VC leader for the code to save $200 on Summit registration. 24 Hours of PASS The next 24HOP will be on July 31. This Summit Preview edition will feature 24 consecutive webcasts presented by experts who will be speaking at Summit in October. Registration for this free event is open now. And we will be using the GoToWebinar platform for 24HOP also. Business Analytics Conference April marked the first PASS Business Analytics Conference in Chicago. This introduced PASS to another segment of data professionals: the analysts and data scientists who work with the world’s growing collection of data. Overall the inaugural event was a success and gave us a glimpse into this increasingly important space. After Chicago the Board had several serious discussions about the lessons learned from this seven and what we should do next. We agreed to apply those lessons and continue to invest in this event; there will be a PASS Business Analytics Conference in 2014. I’m very pleased the next event will be in San Jose, CA, the heart of Silicon Valley, a place where a great deal of investment and innovation in data analytics is taking place. Global SQL Community Over the last couple of years PASS has been taking steps to become more relevant to SQL communities in different parts of the world. In May I had the opportunity to attend SQL Bits XI in Nottingham, England. It was enlightening to meet and talk with SQL professionals from around the U.K. as well as many other European countries. The many SQL Bits volunteers put on a great event and were gracious hosts. Budgets The Board passed the FY14 budget at the end of June. The  budget process can be challenging and requires the Board to make some difficult choices about where to allocate resources. Overall I’m satisfied with the decisions we made and think we are investing in the right activities and programs. Next Up The Board is meeting July 18-19 in Kansas City. We will be holding the Executive Committee election for the Exec Co that will take office in 2014. We will also be discussing plans for the next BA conference as well as the next steps for our Global Growth initiative. Applications for the upcoming Board of Directors election open on July 24. If you are considering running for the Board you can visit the PASS elections site to learn more about the election process. And I encourage anyone considering running to reach out to current and past Board members to learn about what the role entails. Plans for the next PASS Summit are in full swing. We are working on some fun new ideas to introduce attendees to the many ways to become involved in the SQL community.

  Read the article

• Stepping outside Visual Studio IDE [Part 2 of 2] with Mono 2.6.4

  - by mbcrump

  Continuing part 2 of my Stepping outside the Visual Studio IDE, is the open-source Mono Project. Mono is a software platform designed to allow developers to easily create cross platform applications. Sponsored by Novell (http://www.novell.com/), Mono is an open source implementation of Microsoft's .NET Framework based on the ECMA standards for C# and the Common Language Runtime. A growing family of solutions and an active and enthusiastic contributing community is helping position Mono to become the leading choice for development of Linux applications. So, to clarify. You can use Mono to develop .NET applications that will run on Linux, Windows or Mac. It’s basically a IDE that has roots in Linux. Let’s first look at the compatibility: Compatibility If you already have an application written in .Net, you can scan your application with the Mono Migration Analyzer (MoMA) to determine if your application uses anything not supported by Mono. The current release version of Mono is 2.6. (Released December 2009) The easiest way to describe what Mono currently supports is: Everything in .NET 3.5 except WPF and WF, limited WCF. Here is a slightly more detailed view, by .NET framework version: Implemented C# 3.0 System.Core LINQ ASP.Net 3.5 ASP.Net MVC C# 2.0 (generics) Core Libraries 2.0: mscorlib, System, System.Xml ASP.Net 2.0 - except WebParts ADO.Net 2.0 Winforms/System.Drawing 2.0 - does not support right-to-left C# 1.0 Core Libraries 1.1: mscorlib, System, System.Xml ASP.Net 1.1 ADO.Net 1.1 Winforms/System.Drawing 1.1 Partially Implemented LINQ to SQL - Mostly done, but a few features missing WCF - silverlight 2.0 subset completed Not Implemented WPF - no plans to implement WF - Will implement WF 4 instead on future versions of Mono. System.Management - does not map to Linux System.EnterpriseServices - deprecated Links to documentation. The Official Mono FAQ’s Links to binaries. Mono IDE Latest Version is 2.6.4 That's it, nothing more is required except to compile and run .net code in Linux. Installation After landing on the mono project home page, you can select which platform you want to download. I typically pick the Virtual PC image since I spend all of my day using Windows 7. Go ahead and pick whatever version is best for you. The Virtual PC image comes with Suse Linux. Once the image is launch, you will see the following: I’m not going to go through each option but its best to start with “Start Here” icon. It will provide you with information on new projects or existing VS projects. After you get Mono installed, it's probably a good idea to run a quick Hello World program to make sure everything is setup properly. This allows you to know that your Mono is working before you try writing or running a more complex application. To write a "Hello World" program follow these steps: Start Mono Development Environment. Create a new Project: File->New->Solution Select "Console Project" in the category list. Enter a project name into the Project name field, for example, "HW Project". Click "Forward" Click “Packaging” then OK. You should have a screen very simular to a VS Console App. Click the "Run" button in the toolbar (Ctrl-F5). Look in the Application Output and you should have the “Hello World!” Your screen should look like the screen below. That should do it for a simple console app in mono. To test out an ASP.NET application, simply copy your code to a new directory in /srv/www/htdocs, then visit the following URL: http://localhost/directoryname/page.aspx where directoryname is the directory where you deployed your application and page.aspx is the initial page for your software. Databases You can continue to use SQL server database or use MySQL, Postgress, Sybase, Oracle, IBM’s DB2 or SQLite db. Conclusion I hope this brief look at the Mono IDE helps someone get acquainted with development outside of VS. As always, I welcome any suggestions or comments.

  Read the article

• It’s official – Red Gate is a great place to work!

  - by red@work

  At a glittering award ceremony last week, we found out that we’re officially the 14th best small company to work for in the whole of the UK! This is no mean feat, considering that about 1,000 companies enter the Sunday Times Top 100 best companies awards each year. Most of these are in the small companies category too. It's the fourth year in a row for us to be in the Top 100 list and we're tickled pink because the results are based on employee opinion. We’re particularly proud to be the best small company in Cambridge (in the whole of East Anglia, in fact) and the best small software development company in the entire UK. So how does it all work? Well, 90% of us took the time to answer over 70 questions on categories such as management, benefits, wellbeing, leadership, giving something back and what we think of Red Gate as a whole. It makes you think about every part of day to day working life and how you feel about it. Do you slightly or strongly agree or disagree that your manager motivates your to do your best every day, or that you have confidence in Red Gate's leaders, or that you’re not spending too much time working? It's great to see that we had one of the best scores in the country for the question "Do you think your company takes advantage of you?" We got particularly high scores for management, wellbeing and for giving something back too. A few of us got dressed up and headed to London for the awards; very excited about where we’d place but slightly nervous about having to get up on stage. There was a last minute hic up with a bow tie but the Managing Editor of the Sunday Times kindly stepped in to offer his assistance just before we had our official photo taken. We were nominated for two Special Recognition Awards. Despite not bringing them home this year, we're very proud to be nominated as there are only three nominations in each category. First we were up for the Training and Development award. Best Companies loved that we get together at lunchtimes to teach each other photography, cookery and French, as well as our book clubs and techie talks. And of course they liked our opportunities to go on training courses and to jet off to international conferences. Our other nomination was for the Wellbeing award. Best Companies loved our free food (and let’s face it, so do we). Porridge or bacon sandwiches for breakfast, a three course hot dinner, and free fruit and cereals all day long. If all that has an affect on the waistline then there are plenty of sporty activities for us all to get involved in, such as yoga, running or squash. Or if that’s not your thing then a relaxing massage helps us all to unwind every few months or so. The awards were hosted by news presenter Kate Silverton. She gave us a special mention during the ceremony for having great customer engagement as well as employee engagement, after we told her about Rodney Landrum (a Friend of Red Gate) tattooing our logo on his arm. We showed off our customised dinner jacket (thanks to Dom from Usability) with a flashing Red Gate logo on the back and she seemed suitability impressed. Back in the office the next day, we popped open the champagne and raised a glass to our success. Neil, our joint CEO, talked about how pleased he was with the award because it's based on the opinions of the people that count – us. You can read more about the Sunday Times awards here. By the way, we're still growing and are still hiring. If you’d like to keep up with our latest vacancies then why not follow us on Twitter at twitter.com/redgatecareers. Right now we're busy hiring in development, test, sales, product management, web development, and project management. Here's a link to our current job opportunities page – we'd love to hear from great people who are looking for a great place to work! After all, we're only great because of the people who work here. Post by: Alice Chapman

  Read the article

• ArchBeat Link-o-Rama Top 10 for November 2012

  - by Bob Rhubart

  Every day ArchBeat searches the web for content created by and for community members, and then shares that content via social media. Here's the list of the Top 10 most popular items posted on the OTN ArchBeat Facebook Page for November 2012. One-Stop Shop for Oracle Webcasts Webcasts can be a great way to get information about Oracle products without having to go cross-eyed reading yet another document off your computer screen. Oracle's new Webcast Center offers selectable filtering to make it easy to get to the information you want. Yes, you have to register to gain access, but that process is quick, and with over 200 webcasts to choose from you know you'll find useful content. OAM/OVD JVM Tuning Vinay from the Oracle Fusion Middleware Architecture Group (otherwise known as the A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. White Paper: Oracle Exalogic Elastic Cloud: Advanced I/O Virtualization Architecture for Consolidating High-Performance Workloads This new white paper by Adam Hawley (with contributions from Yoav Eilat) describes in great detail the incorporation into Oracle Exalogic of virtualized InfiniBand I/O interconnects using Single Root I/O Virtualization (SR-IOV) technology. Architected Systems: "If you don't develop an architecture, you will get one anyway..." "Can you build a system without taking care of architecture?," asks Manuel Ricca. "You certainly can. But inevitably the system will be unbalanced, neglecting the interests of key stakeholders, and problems will soon emerge." Backup and Recovery of an Exalogic vServer via rsync "On Exalogic a vServer will consist of a number of resources from the underlying machine," says the man known only as Donald. "These resources include compute power, networking and storage. In order to recover a vServer from a failure in the underlying rack all of these components have to be thoughts about. This article only discusses the backup and recovery strategies that apply to the storage system of a vServer." This Week on the OTN Architect Community Home Page Make time to check out this week's features on the OTN Solution Architect Homepage, including: SOA Practitioner Guide: Identifying and Discovering Services Technical article by Yuli Vasiliev on Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster Podcast: Are You Future Proof? Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic – when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. OIM 11g : Multi-thread approach for writing custom scheduled job | Saravanan V S Saravanan shares insight and expertise relevant to "designing and developing an OIM schedule job that uses multi threaded approach for updating data in OIM using APIs." How to Create Virtual Directory in Weblogic Server | Zeeshan Baig Oracle ACE Zeeshan Baig shows you how in six easy steps. SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Thought for the Day "Humans are the best value in computers -- where else can you get a non-linear computer weighing only about 160lbs, having a billion binary decision elements, that can be mass-produced by unskilled labour?" — Anonymous Source: SoftwareQuotes.com

  Read the article

• Need WIF Training?

  - by Your DisplayName here!

  I spend numerous hours every month answering questions about WIF and identity in general. This made me realize that this is still quite a complicated topic once you go beyond the standard fedutil stuff. My good friend Brock and I put together a two day training course about WIF that covers everything we think is important. The course includes extensive lab material where you take standard application and apply all kinds of claims and federation techniques and technologies like WS-Federation, WS-Trust, session management, delegation, home realm discovery, multiple identity providers, Access Control Service, REST, SWT and OAuth. The lab also includes the latest version of the thinktecture identityserver and you will learn how to use and customize it. If you are looking for an open enrollment style of training, have a look here. Or contact me directly! The course outline looks as follows: Day 1 Intro to Claims-based Identity & the Windows Identity Foundation WIF introduces important concepts like conversion of security tokens and credentials to claims, claims transformation and claims-based authorization. In this module you will learn the basics of the WIF programming model and how WIF integrates into existing .NET code. Externalizing Authentication for Web Applications WIF includes support for the WS-Federation protocol. This protocol allows separating business and authentication logic into separate (distributed) applications. The authentication part is called identity provider or in more general terms - a security token service. This module looks at this scenario both from an application and identity provider point of view and walks you through the necessary concepts to centralize application login logic both using a standard product like Active Directory Federation Services as well as a custom token service using WIF’s API support. Externalizing Authentication for SOAP Services One big benefit of WIF is that it unifies the security programming model for ASP.NET and WCF. In the spirit of the preceding modules, we will have a look at how WIF integrates into the (SOAP) web service world. You will learn how to separate authentication into a separate service using the WS-Trust protocol and how WIF can simplify the WCF security model and extensibility API. Day 2 Advanced Topics:  Security Token Service Architecture, Delegation and Federation The preceding modules covered the 80/20 cases of WIF in combination with ASP.NET and WCF. In many scenarios this is just the tip of the iceberg. Especially when two business partners decide to federate, you usually have to deal with multiple token services and their implications in application design. Identity delegation is a feature that allows transporting the client identity over a chain of service invocations to make authorization decisions over multiple hops. In addition you will learn about the principal architecture of a STS, how to customize the one that comes with this training course, as well as how to build your own. Outsourcing Authentication:  Windows Azure & the Azure AppFabric Access Control Service Microsoft provides a multi-tenant security token service as part of the Azure platform cloud offering. This is an interesting product because it allows to outsource vital infrastructure services to a managed environment that guarantees uptime and scalability. Another advantage of the Access Control Service is, that it allows easy integration of both the “enterprise” protocols like WS-* as well as “web identities” like LiveID, Google or Facebook into your applications. ACS acts as a protocol bridge in this case where the application developer doesn’t need to implement all these protocols, but simply uses a service to make it happen. Claims & Federation for the Web and Mobile World Also the web & mobile world moves to a token and claims-based model. While the mechanics are almost identical, other protocols and token types are used to achieve better HTTP (REST) and JavaScript integration for in-browser applications and small footprint devices. Also patterns like how to allow third party applications to work with your data without having to disclose your credentials are important concepts in these application types. The nice thing about WIF and its powerful base APIs and abstractions is that it can shield application logic from these details while you can focus on implementing the actual application. HTH

  Read the article

• PASS summit 2013. We do not remember days. We remember moments.

  - by Maria Zakourdaev

    "Business or pleasure?" barked the security officer in the Charlotte International Airport. "I’m not sure, sir," I whimpered, immediately losing all courage. "I'm here for the database technologies summit called PASS”. "Sounds boring. Definitely a business trip." Boring?! He couldn’t have been more wrong. If he only knew about the countless meetings throughout the year where I waved my hands at my great boss and explained again and again how fantastic this summit is and how much I learned last year. One by one, the drops of water began eating away at the stone. He finally approved of my trip just to stop me from torturing him. Time moves as slow as a turtle when you are waiting for something. Time runs as fast as a cheetah when you are there. PASS has come...and passed. It’s been an amazing week. Enormous sqlenergy has filled the city, filled the convention center and the surrounding pubs and restaurants. There were awesome speakers, great content, and the chance to meet most inspiring database professionals from all over the world. Some sessions were unforgettable. Imagine a fully packed room with more than 500 people in awed silence, catching each and every one of Paul Randall's words. His tremendous energy and deep knowledge were truly thrilling. No words can describe Rob Farley's unique presentation style, captivating and engaging the audience. When the precious session minutes were over, I could tell that the many random puzzle pieces of information that his listeners knew had been suddenly combined into a clear, cohesive picture. I was amazed as always by Paul White's great sense of humor and his phenomenal ability to explain complicated concepts in a simple way. The keynote by the brilliant Dr. DeWitt from Microsoft in front of the full summit audience of 5000 deeply listening people was genuinely breathtaking. The entire conference throughout offered excellent speakers who inspired me to absorb the knowledge and use it when I got home. To my great surprise, I found that there are other people in this world who like replication as much I do. During the Birds of a Feather Luncheon, SQL Server MVP Ted Krueger was writing a script for replicating the food to other tables. I learned many things at PASS, and not all of them were about SQL. After three summits, this time I finally got the knack of networking. I actually went up and spoke to people, and believe me, that was not easy for an introvert. But this is what the summit is all about. Sqlpeople. They are the ones who make it such an exciting experience. I will be looking forward to the next year. Till then I have my notes and new ideas. How long was the summit? Thousands of unforgettable moments.

  Read the article

• The Raspberry Pi JavaFX In-Car System (Part 3)

  - by speakjava

  Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply.  All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A).  My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area.  This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327.  Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did.  I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication.  Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID.  The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327".  To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file.  After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static     address 10.0.0.13     gateway 10.0.0.254     netmask 255.255.255.0 iface wlan0 inet static     address 192.168.0.1     netmask 255.255.255.0     wireless-essid Wifi327     wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct.  However, ifconfig showed no assigned IP address.  If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327.  I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted.  Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d.  All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi.  Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

  Read the article

• Business School graduate joins Oracle

  - by jessica.ebbelaar(at)oracle.com

  My name is Mathias, I work as an Applications Inside Sales Rep for the French market, and I’d like to give you a brief snapshot of my experience at Oracle. First things first, how did you hear about Oracle? Where have you seen the sharp and recognizable red logo? Was it in Charles de Gaulle Airport when your eyes crossed the 20-metre banner with a picture of a strange big machine in the middle? Was it through reading the Forbes 10 top IT companies worldwide ranking? Or is it because IT is your thing and you cannot but know one of the “big four”? Meeting with a Grenoble Alumnus My story is a little different. My plan was to work in sales, in the IT industry. I had heard about Oracle, but my opinion at the time was that this kind of multinational company was way out of reach for a young graduate, even with high enthusiasm and great excitement to be (finally) on the job market. So, I was really surprised when I had an interesting conversation with a top alumnus of my business school. We were at the Grenoble Ecole de Management graduation ceremony (our graduation!), and before the party got really started, I got to chat with her. She told me of the great experience she was getting by living and working in Dublin. She had already figured it all out: “you work with another 100 young people from 10 different nationalities across Europe, you can be based in Dublin, but then once you work really hard you can move to Malaga Spain or other BUs around the world, you can work with different lines of business and learn about new “techy” and business oriented products, move to the field in your home country or elsewhere, etc.” What, what, what? Moving around Europe, trained by the best sales coaches in the world, acquiring strong IT knowledge and getting on board with one of fastest-growing and most watched companies in the world? Well, I was in. The next day (OK, 3 days after, the time to recover), I sent her my CV, and 3 months later I started as a Business Development Consultant at Oracle in Dublin, representing the latest cloud based CRM across the French market. That was 15 months ago. Since then, I moved line of business twice, I’m always learning new things and working with different and senior stakeholders; I have attended hundreds of hours of sales and product training (priceless when you come from a business background); I passed the Dublin Institute of Technology Sales Certification through different trainings given onsite within Oracle; I’ve led projects based around social media and I’ve gotten involved within various sales deals going on my market. Despite all of these great things, two will remain in my spirit: the multiculturalism that I experience every day in the office, and the American style of management - more direct and open than what you can find in “regular French companies”. Sales Progression Board In May 2012, I passed what we call a ‘Sales Progression Board’ to be promoted to an Inside Sales position. I am now in charge of generating revenue through the sale of Oracle applications on my specific territory. Always keeping in my mind my personal ambition: going to the field one day. Interested to join Oracle in the same role as Mathias? Visit http://campus.oracle.com.

  Read the article

• Enabling Google Webmaster Tools With Your GWB Blog

  - by ToStringTheory

  I’ll be honest and save you some time, if you don’t have your own domain for your GWB blog, this won’t help, you may just want to move on…  I don’t want to waste your time……… Still here?  Good.  How great are Google’s website tools?  I don’t just mean Analytics which rocks, but also their Webmaster Tools (https://www.google.com/webmasters/tools/) which gives you a glimpse into the queries that provide you your website traffic, search engine behavior on your site, and important keywords, just to name a few.   Pictured Above: Cool statistics. Problem Thanks to svickn over at wtfnext.com (another GeeksWithBlogs blog), we already have the knowledge on how to setup Google Analytics (wtfnext.com - How to: Set up Google Analytics on your GeeksWithBlogs blog).  However, one of the questions raised in the post, and even semi-answered in the questions, was how to setup Google Webmaster Tools with your blog as well. At first glance, it seems like it can’t be done.  Google graciously gives you several different options on how to authorize that you own a site.  The authentication options are: 1. (Recommended) – Upload an HTML file to your server 2. Add a meta tag to your site’s home page 3. Use your Google Analytics account 4. Add a DNS record to your domain’s configuration Since you don’t have access to the base path, you can’t do #1.  Same goes for #2 since you can’t edit the master/index page.  As for #3, they REQUIRE the Analytics code to be in the <head> section of your page, so even though we can use the workaround of hosting it in the news section, it won’t allow it since it isn’t in the correct place. Solution Last I checked, I didn’t see the DNS record option for Webmaster Tools.  Maybe this was recently added, or maybe I don’t remember it since I was always able to use some other method to authorize it.  In this case though, this is the option that we need.  My registrar wasn’t in their list, but they provide detailed enough instructions for the ‘Other’ option: Simply create a TXT record with your domain hoster (mine is DynDns), fill in the tag information, and then click verify.  My entry was able to be resolved immediately, but since you are working with DNS, it may take longer.  If after 24 hours you still aren’t able to verify, you can use a site such as mxtoolbox.com, and in the searchbox type “txt: {domain-name-here}”, to see if your TXT record was entered successfully. It is pretty simple to setup the TXT entry in DynDns, but if you have questions/comments, feel free to post them. Conclusion With this simple workaround (not really a workaround, but feature since they offer it..), you are now able to see loads of information regarding your standings in the world of the Google Search Engine.  No critical issues?  Did I do something wrong?! As an aside, you can do the same thing with the Bing Webmaster Tools by adding a CNAME record to bing.verify.com…  Instructions can be found on the ‘Add Site’ popup when adding your site. If you don’t have your own domain, but continued, to read to this point – thank you!

  Read the article

• Failed to install GRUB on a separate '/boot' partition on a fake RAID 0 (12.04LTS)

  - by gerben

  I'm having some problems getting GRUB configured for Ubuntu 12.04LTS on a fake RAID 0. I can either get the GRUB rescue prompt at startup, or just a GRUB prompt but I cannot boot to Ubuntu manually. How can I configure the GRUB to actually use the Ubuntu install? The steps taken: Installing Ubuntu on fake raid The Ubuntu installer cannot install Ubuntu on the drive. After defining the partitions to use it fails with "Error: ???", pressing OK terminates the installer. Therefore, I used GParted to configure the partitions: /dev/mapper/sil_agadaccfacbg : (the RAID configuration, created partition): /dev/mapper/sil_agadaccfacbg1:ext2, 200MiB, (with 'boot' flag) /dev/mapper/sil_agadaccfacbg3:ext2, 67.75GiB, (which will contain Ubuntu) /dev/mapper/sil_agadaccfacbg2:extended, 1.00GiB, (for swap) Contains: /dev/mapper/sil_agadaccfacbg5: unknown Because of the fake-RAID, I already mounted the destination partitions before running the Ubuntu installer: > mkdir /mnt/boot > sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt/boot > mkdir /mnt/ubuntu > sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt/ubuntu In the installer I chose the following partition usage: /dev/mapper/sil_agadaccfacbg1 ext2, mount at /boot (209MB) /dev/mapper/sil_agadaccfacbg3 ext2, mount at / (72751MB) /dev/mapper/sil_agadaccfacbg5 swap Device for boot loader installation: /dev/mapper/sil_agadaccfacbg, linux device-mapper (striped) (74.0GB) This will install Ubuntu, but will fail to install GRUB (it seems to use /dev/sda no matter which one I choose) Installing GRUB with dpkg-reconfigure I followed this guide, but adapted it for two partitions: sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt/ubuntu sudo mount --bind /dev /mnt/ubuntu/dev sudo mount --bind /proc /mnt/ubuntu/proc sudo mount --bind /sys /mnt/ubuntu/sys sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt/boot sudo mount --bind /boot /mnt/boot sudo chroot /mnt/ubuntu dpkg-reconfigure grub-pc However, it does not ask where to install GRUB (I should choose /dev/mapper/sil_agadaccfacbg somewhere..) After reboot I get the GRUB rescue prompt with message no such device Installing GRUB with grub-install After the same mount commands as above, I continued with: > sudo grub-install --root-directory=/mnt/boot /dev/mapper/sil_agadaccfacbg This gives the following message: /usr/sbin/grub-probe: error: cannot find a device for /mnt/boot/boot/grub (is /dev mounted?) It does succeed when mounting just the boot partition : sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt sudo grub-install --root-directory=/mnt/ /dev/mapper/sil_agadaccfacbg This finishes with: Installation finished. No error reported. After reboot I get the GRUB console, with welcome text. Attempting to manually start Ubuntu: ls (hd0) (hd0,msdos3) : (Ubuntu install partition) (hd0,msdos1) : (Ubuntu boot partition) (hd1) (hd1,msdos1) : (Ubuntu live USB) ls (hd0,msdos3)/ contains: - vmlinuz - lib/ - tmp/ - initrd.img - mnt/ - var/ - proc/ - boot/ - root/ - etc/ - run/ - media/ - sbin/ - bin/ - selinux/ - dev/ - srv/ - home/ - sys/ ls (hd0,msdos1)/ contains: -grub/ -boot/ -initrd.img-3.8.0-29-generic -vmlinuz-3.8.0.29-generic -config-3.8 linux (hd0,msdos3)/vmlinuz This returns "error: out of disk" Installing GRUB on Ubuntu partition with grub-install > sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt > sudo grub-install --root-directory=/mnt/ /dev/mapper/sil_agadaccfacbg This finishes with message: > Installation finished. No error reported. After reboot get the message "error: out of disk" and the GRUB rescue prompt. Configuring GRUB with grub-mkconfig Attempting to run grub-mkconfig with different destinations results in the same message: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). Remarks: Initially I didn't use a separate /boot partition, but the GRUB install then also failed. Because some mention that a small partition at the beginning of the drive is necessary on old machines, I retried with a /boot partition This is a single boot (no other OS's installed/used)

  Read the article

• Virtualized data centre&ndash;Part three: Architecture

  - by marc dekeyser

  Having the basics (like discussed in the previous articles) is all good and well, but how do we get started on this?! It can be quite daunting after all!   From my own point of view I can absolutely confirm your worries and concerns, but also tell you that it is not as hard as it seems! Deciding on what kind of motherboard to buy, processor and how much memory is an activity you will spend quite some time doing research on. And that is not even mentioning storage! All in all it comes down to setting you expectations and your budget. Probably adjusting your expectations according to your budget :). Processors As a rule of thumb you want VT-D (virtualization) technology built in to the processor allowing you to have 64 bit machines running on your host. Memory The more the better! If you are building a home lab don’t bother with ECC unless you are going to run machines that absolutely should be on all the time and your comfort depends on it! Motherboard Depends on what you are going to do with storage: If you are going the NAS way then the number of SATA port/RAID capabilities do not really matter. If you decide to have a single server with lots of dedicated storage it obviously matters how much SATA ports you will have, alternatively you could use a RAID controller (but these set you back a pretty penny if you want one. DELL 6i’s are usually available for a good bargain if you can find one!). Easiest is to get one with a built-in graphics card (on-board) as you are just adding more heat, power usage and possible points of failure. Networking Just like your choice of motherboard the networking side tends to depend on how you want to go. A single virtualization  host with local storage can usually get away with having a single network card, a cluster or server which uses iSCSI storage tends to have more than one teamed up :). Storage The dreaded beast from the dark! The horror which lives in the forest! The most difficult decision you are going to make in the building of your lab. Why you might ask? Simple my friend, having the right choice of storage can make or break your virtualization solution. The performance of you storage choice will have an important impact on the responsiveness of your virtual machines and the deployment of new machines. It also makes a run with your budget! If you decide to go the NAS route you will be dropping a lot more money than if you would be having just a bunch of disks sitting in a server and manually distributing the virtual machines over the disks. Platform I’m a Microsoftee so Hyper-V is a dead giveaway for me. If you are interested in using VMware I won’t stop you but the rest of my posts will be oriented on Server 2012 Hyper-V (aka 3.0)! What did I use? Before someone asks me this in the comments I’ll give you a quick run down of what I am using. - Intel 2.4 quad core processors (i something something) - 24 GB DDR3 Memory - Single disk in each server (might look at this as I move the servers to 2012) - Synology DS1812+ NAS - 3 network interfaces where possible - HP1800 procurve managed switch I decided to spring for the NAS as I will also be using it for backups and media storage (which is working out quite nicely with my Xbox 360 I must say). At the time of building my 2 boxes (over a year and a half ago) these set me back about 900 euros each so I can image you can build the same or better for a lower price. Next article will be diagramming what I want to achieve and starting a build on the Hyper V 3.0 cluster!

  Read the article

• Build 2012, the first post

  - by Dennis Vroegop

  Yes, I was one of the lucky few who made it to Build. Build, formerly known as the Professional Developers Conference (or PDC) is the place to be if you are a developer on the Microsoft platform. Since I take my job seriously I took out some time on my busy schedule, sighed at the thought of not seeing my family for another week and signed up for it. Now, before I talk about the amazing Surface devices (yes, this posting is written on one of them), the great Lumia 920 we all got, the long deserved love for touch, NUI and other things I have been talking about for years, I need to do some ranting. So if you are anxious to read about the technical goodies you’ll have to wait until the next post. Still here? Good. When I signed up for the Build conference during my holidays this summer it was pretty obvious that demand would be high. Therefor I made sure I was on time. But even though I registered only 7 minutes after the initial opening time the Early Bird discount for the first 500 attendees was already sold out. I later learned that registration actually started 5 minutes before the scheduled time but even though it is still impressive how fast things went. The whole event sold out in 57 minutes Or so they say… A lot of people got put on the waiting list. There was room for about 1500 attendees and I heard that at least 1000 people were on that waiting list, including a lot of people I know. Strangely, all of them got tickets assigned after 2 weeks. Here at the conference I heard from a guy from Nokia that they had shipped 2500 Lumia 920 phones. That number matches the rumors that the organization added 1000 extra tickets. This, of course is no problem. I am not an elitist and I think large crowds have a special atmosphere that I quite like. But…. The Microsoft Campus is not equipped for that sheer volume of visitors. That was painfully obvious during on-site registration where people had to stand in line for over 2 hours. The conference is spread out over 2 buildings, divided by a 15 minute busride (yes, the campus is that big). I have seen queues of over 200 people waiting for the bus and when that arrived it had a capacity of 16. I can assure you: that doesn’t fit. This of course means that travelling from one site to the other might take about 30 minutes. So you arrive at the session room just in time, only to find out it’s full. Since you can’ get into that session you try to find another one but now you’re even more late so you have no chance at all of entering. The doors are closed and you’re told: “Well, you can watch the live stream online”. Mmmm… So I spend thousands of dollars, a week away from home, family and work to be told I can also watch the sessions online? Are you fricking kidding me? I could go on but I won’t. You get the idea. It’s jus badly organized, something I am not really used to in my 20 years of experience at Microsoft events. Yes, I am disappointed. I hope a lot of people here in Redmond will also fill in the evals and that the organization next year will do a better job. Really, Build deserves better. </rantmode>

  Read the article

• ODEE Green Field (Windows) Part 3 - SOA Suite

  - by AndyL-Oracle

   So you're still here, are you? I'm sure you're probably overjoyed at the prospect of continuing with our green field installation of ODEE. In my previous post, I covered the installation of WebLogic - you probably noticed, like I did, that it's a pretty quick install. I'm pretty certain this had everything to do with how quickly the next post made it to the internet! So let's dig in. Make sure you've followed the steps from the initial post to obtain the necessary software and prerequisites! Unpack the RCU (Repository Creation Utility). This ZIP file contains a directory (rcuHome) that should be extracted into your ORACLE_HOME. Run the RCU – execute rcuHome/bin/rcu.bat. Click Next. Select Create and click Next. Enter the database connection details and click Next – any failure to connection will show in the Messages box. Click Ok Expand and select the SOA Infrastructure item. This will automatically select additional required components. You can change the prefix used, but DEV is recommended. If you are creating a sandbox that includes additional components like WebCenter Content and UMS, you may select those schemas as well but they are not required for a basic ODEE installation. Click Next. Click OK. Specify the password for the schema(s). Then click Next. Click Next. Click OK. Click OK. Click Create. Click Close. Unpack the SOA Suite installation files into a single directory e.g. SOA. Run the installer – navigate and execute SOA/Disk1/setup.exe. If you receive a JDK error, switch to a command line to start the installer. To start the installer via command line, do Start?Run?cmd and cd into the SOA\Disk1 directory. Run setup.exe –jreLoc < pathtoJRE >. Ensure you do not use a path with spaces – use the ~1 notation as necessary (your directory must not exceed 8 characters so “Program Files” becomes “Progra~1” and “Program Files (x86)” becomes “Progra~2” in this notation). Click Next. Select Skip and click Next. Resolve any issues shown and click Next. Verify your oracle home locations. Defaults are recommended. Click Next. Select your application server. If you’ve already installed WebLogic, this should be automatically selected for you. Click Next. Click Install. Allow the installation to progress… Click Next. Click Finish. You can save the installation details if you want. That should keep you satisfied for the moment. Get ready, because the next posts are going to be meaty! 

  Read the article

• Package management system corrupted. Cannot install or remove packages. U12.04LTS

  - by user271490

  Having read other posts, I believe that this may be less about samba than about update system. Below is the log file of the failed installation of Samba. I have been trying without success to install/outstall samba so that I could install anything else ... I cannot either install or remove samba using either update-manager or apt-get (nor indeed Software Centre). One of the errors that I have had to correct is the presence after "removal" (failed) of /usr/share/system-config-samba directory which finally allowed itself to be deleted. That, however was then ... I have U12.04LTS. running on release 63 because I allowed the upgrade to 64 this morning which fell over - no output to monitor - obviously even less support for my graphic chip than I am suffering already (see other posts in this forum). According to my interpretation of the dpkg returned errors there may be some problem with the package files, but if this is the case then it is on servers 'main', 'nantes uni fr' and 'best fr' at the very least if not everywhere. The suggestions offered at Package operation failed and elsewhere have not worked for me. This linked post suggests that a similar error is present in other packages, or that the error is in the 'update system' I have tried ... sudo apt-get remove samba ... autoremove ... install samba ... clean ... update -f all of the above In update-manager I have tried the "reload packages list" which fails to terminate because of the error. I have tried to install and remove samba from the software centre ... :( I am at a loss ... I need help, please! Firstly to recover my apt-get/update-manager/Software Centre so that I can at least carry on with my continuing installation - up to communicating with home network hence need for samba - which brings me to my second requirement ... samba. PS is the issue about "MaxReports" associated or apart? UPDATE! Being heartily sick of restarting FF every 5 seconds I thought I'd try again with Chromium ... and got the same errors from dpkg about corrupt compressed package - coincidence? Of course this was no longer in clipboard when I got here because apport has just errored ... AAARRRGGGH!!! Why does every error clear the clipboard? Thanks for any and all help!! installArchives() failed: Preconfiguring packages ... ... snip (Reading database ... ... snip (Reading database ... 184858 files and directories currently installed.) Unpacking samba (from .../samba_2%3a3.6.3-2ubuntu2.10_i386.deb) ... dpkg-deb (subprocess): data: internal gzip read error: ': data error' dpkg-deb: error: subprocess returned error exit status 2 dpkg: error processing /var/cache/apt/archives/samba_2%3a3.6.3-2ubuntu2.10_i386.deb (--unpack): subprocess dpkg-deb --fsys-tarfile returned error exit status 2 No apport report written because MaxReports is reached already Selecting previously unselected package system-config-samba. Unpacking system-config-samba (from .../system-config-samba_1.2.63-0ubuntu5_all.deb) ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for ufw ... Processing triggers for man-db ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Errors were encountered while processing: /var/cache/apt/archives/samba_2%3a3.6.3-2ubuntu2.10_i386.deb Error in function: dpkg: dependency problems prevent configuration of system-config-samba: system-config-samba depends on samba; however: Package samba is not installed. dpkg: error processing system-config-samba (--configure): dependency problems - leaving unconfigured

  Read the article

• Starting over and new to Ubuntu

  - by 2funnyyone

  We have been having repeated problems with our interent service and using windows xp & sp3 (users and premissions) I see no need for them. I started with computers long before windows. Every since sp 3 come out in 2009 I have had nothing but problems. I have lost so many computers to virius and trojans, we just stack them up. We are with Qwest/ Century link which is using advertising servers which I think is causing the problem. All the computers are networked together which is not how I set them up. I beleive Century link is networking them through assignment of a domain for our home. This causes all the computers to crash twice. This is getting expensive. We tried buying new harddrives but reinfect with hours of connecting to internet. I also beleive the modem, router and all computers are infected. I put combofix on this one and that is the only reason we are still online with this laptop. I am afraid to install new equipment because my partner and I are on SSDI and this cost a lot. I go to school at UOP and had to run off a flash and reboot this laptop to recovery every other day or so, this pass month. New plan is: We are getting ready to install new equipment but afraid to reinfect again. Need help to install new equipment. The plan is to use current internet services from Qwest/ now Century Link. The list of New equipment in order: Century link wireless modem is ZyXEL PK5000Z with 4 direct connect Ethernet ports Next Dell Optiplex 210L ( used auction purchase ) 2 gb ram 80 g hard drive Ubuntu 11.10 operating system Next Wireless D-Link router WBR-1310 with 4 direct connect Ethernet ports OK-------- Purchased Dell OEM disk for Repair or Reinstalling Windows XP Professional Operating system (2 roommates as well) All infected computers are Dell desktops or laptops with XP Pro Also purchasing Ubuntu 12.04 for 3 computers. We like the way it runs but still learning it. Questions 1] How do we fdisk the infected computers without infecting new system. We have Dos disks, but none have floppy dish drive. We do have a new floppy disk drive and usb adapter we purchased from Amazon. 2] We are thinking Avast internet security because of the boot scan. We want all software loaded before reconnecting. We can manually load our internet provider information. We purchased StopZilla $100 for 5 computers, but not sure that is what we need. But need how to setup ports security and services we will need. Really lost at this part. So we are safe when we go back on the internet. 3] Want to connect reloaded fdisk systems to router as public connection and no sharing. Do not want to network all computers. 4] Want parental/ ownership control from Ubuntu system for internet connection (Children and friends). Do we restrict at the modem and/ or router? Any help would be a blessing. I do not want to go alone on this anymore.

  Read the article

• What's wrong with my wireless?

  - by dazzle

  I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

  Read the article

• SQL Saturday and Exploring Data Privacy

  - by Johnm

  I have been highly impressed with the growth of the SQL Saturday phenomenon. It seems that an announcement for a new wonderful event finds its way to my inbox on a daily basis. I have had the opportunity to attend the first of the SQL Saturday's for Tampa, Chicago, Louisville and recently my home town of Indianapolis. It is my hope that there will be many more in my future. This past weekend I had the honor of being selected to speak amid a great line up of speakers at SQL Saturday #82 in Indianapolis. My session topic/title was "Exploring Data Privacy". Below is a brief synopsis of my session: Data Privacy in a Nutshell        - Definition of data privacy        - Examples of personally identifiable data        - Examples of Sensitive data Laws and Stuff        - Various examples of laws, regulations and policies that influence the definition of data privacy        - General rules of thumb that encompasses most laws Your Data Footprint        - Who has personal information about you?        - What are you exchanging data privacy for?        - The amazing resilience of data        - The cost of data loss Weapons of Mass Protection       - Data classification       - Extended properties       - Database Object Schemas       - An extraordinarily brief introduction of encryption       - The amazing data professional  <-the most important point of the entire session! The subject of data privacy is one that is quickly making its way to the forefront of the mind of many data professionals. Somewhere out there someone is storing personally identifiable and other sensitive data about you. In some cases it is kept reasonably secure. In other cases it is kept in total exposure without the consideration of its potential of damage to you. Who has access to it and how is it being used? Are we being unnecessarily required to supply sensitive data in exchange for products and services? These are just a few questions on everyone's mind. As data loss events of grand scale hit the headlines in a more frequent succession, the level of frustration and urgency for a solution increases. I assembled this session with the intent to raise awareness of sensitive data and remind us all that we, data professionals, are the ones who have the greatest impact and influence on how sensitive data is regarded and protected. Mahatma Gandhi once said "Be the change you want to see in the world." This is guidance that I keep near to my heart as I approached this topic of data privacy.

  Read the article

• Snap App Windows to Pre-Defined Screen Sections with Acer GridVista

  - by Asian Angel

  The window snapping feature in Windows 7 and the ability to organize monitor(s) into specific gridded sections have both become popular lately. If you love the idea of having both combined in a single software then join us as we look at Acer GridVista. Note: Acer GridVista works with Windows XP, Vista, & 7. It will also work with dual monitors. Setup Acer GridVista comes in a zip file format and at first you might assume that it is portable in nature but it is not. Once you unzip the enclosed folder you will need to double click on “Setup.exe” to install the program. Acer GridVista in Action Once you have installed the program and started it up all that you will notice at first is the new “System Tray Icon”. Here you can see the “Context Menu”… The only menu command that you will likely use most of the time is the “Grid Configuration Command”. Notice that for our single monitor setup that it lists “Display 1”. The “Single Setting” is enabled by default and you can easily choose the layout that best suits your needs. The enabled layout style will always be highlighted in yellow for easy reference. For our example we chose the “Triple (primary at right)” layout style. Each section will be specifically numbered as shown here. Do not worry…the grid and numbers only appear for a moment and then become invisible again until you move an app window into that section/area of your screen. On every regular app window that you open you will notice three new buttons in the upper right corner. Here is what each of these new buttons do: Acer GridVista Extensions (Transparent, Send To Window Grid, About Acer GridVista): Viewable in a drop-down menu Lock To Grid (Enable/Disable): Enabled by default –> Note: Set to disable on a particular window to keep it free of the “grid locking function” Always On Top (Enable/Disable): Disabled by default A good look at the “Extensions Drop-Down Menu” where you can set an app window to be transparent or send it to a specific screen section on your monitor(s). If you open an app it will not automatically lock into a specific section. To lock the window into a specific section drag-and-drop the app window into the desired section. Notice the red outline and highlighted number on “Section 2” below. The red outline and highlighted number serves as an indicator that if you release the app window at that moment it will lock into the outlined/highlighted section. Now that Notepad is locked into “Section 2” you can see that it is maximized within that section. Continue to drag-and-drop your app windows into the appropriate sections as desired…apps can still be reduced to the “Taskbar” the same as before. Options These are the options available for Acer GridVista… Conclusion If you have been wanting the ability to “snap” windows and organize them into specific screen areas then Acer GridVista is definitely a program that you should try out. Links Download Acer GridVista at Softpedia View detailed information at the Acer GridVista Homepage Similar Articles Productive Geek Tips Multitask Like a Pro with AquaSnapHelp Troubleshoot the Blue Screen of Death by Preventing Automatic RebootAdd Windows 7’s AeroSnap Feature to Vista and XPResize Windows to Specific Dimensions Easily With SizerKeyboard Ninja: Assign a Hotkey to any Window TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Playing Games In Chrome Made Easier Stop In The Name Of Love (Firefox addon) Chitika iPad Labs Gives Live iPad Sale Stats Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet

  Read the article

• PowerShell and SMO – be careful how you iterate

  - by Fatherjack

  I’ve yet to have a totally smooth experience with PowerShell and it was late on Friday when I crashed into this problem. I haven’t investigated if this is a generally well understood circumstance and if it is then I apologise for repeating everything. Scenario: I wanted to scan a number of server for many properties, including existing logins and to identify which accounts are bestowed with sysadmin privileges. A great task to pass to PowerShell, so with a heavy heart I started up PowerShellISE and started typing. The script doesn’t come easily to me but I follow the logic of SMO and the properties and methods available with the language so it seemed something I should be able to master. Version #1 of my script. And the results it returns when executed against my home laptop server. These results looked good and for a long time I was concerned with other parts of the script, for all intents and purposes quite happy that this was an accurate assessment of the server. Let’s just review my logic for each step of the code at the top. Lines 1 to 7 just set up our variables and write out the header message Line 8 our first loop, to go through each login on the server Line 10 an inner loop that will assess each role name that each login has been assigned Line 11 a test to see if each role has the name ‘sysadmin’ Line 13 write out the login name with a bright format as it is a sysadmin login Line 17 write out the login name with no formatting It is quite possible that here someone with more PowerShell experience than me will be shouting at their screen pointing at the error I made but to me this made total sense. Until I altered the code, I altered lines 6 and 7 of code above to be: $c = $Svr.Logins.Count write-host “There are $c Logins on the server” This changed my output to look like this: This started alarm bells ringing – there are clearly not 13 logins listed So, let’s see where things are going wrong, edit the script so it looks like this. I’ve highlighted the changes to make Running this code shows me these results Our $n variable should count up by one for each login returned and We are clearly missing some logins. I referenced this list back to Management Studio for my server and see the Logins as below, where there are clearly 13 logins. We see a Login called Annette in SSMS but not in the script results so I opened that up and looked at its properties and it’s server roles in particular. The account has only public access to the server. Inspection of the other logins that the PowerShell script misses out show they too are only members of the public role. Right now I can’t work out whether there is a good reason for this and if it should be expected behaviour or not. Please spend a few minutes to leave a comment if you have an opinion or theory for this. How to get the full list of logins. Clearly I needed to get a full list of the logins so set about reviewing my code to see if there was a better way to iterate through the roles for each login. This is the code that I came up with and I think it is doing everything that I need it to. It gives me the expected results like this: So it seems that the ListMembers() method is the trouble maker in my first versions of the code. I would have expected that ListMembers should return Logins that are only members of the public role, certainly Technet makes no reference to it being left out in it’s Login.ListMembers details. Suffice to say, it’s a lesson learned and I will approach using it with caution in future circumstances.

  Read the article

• No Wireless Networks, BCM4313 [duplicate]

  - by TalonPlz

  This question already has an answer here: How to Install Broadcom Wireless Drivers (BCM43xx) 38 answers Just bought this little Asus 10 inch laptop that came with Ubuntu 12.04. Everything at my home was fine: Wireless identified and connected. As soon as I went to my girlfriend's house the trouble started. I couldn't connect to wireless (authentication... times out and asks for authentication) I started doing internet searching, tried a few solutions posted on line using terminal commands. No solutions. I decided to upgraded to 12.10-13.04 and that left me with a worse problem: I can no longer see ANY networks what so ever. Wireless card is ON, with out a doubt. Wired connection works. I have been fumbling with driver versions to no .avail, and have no idea which driver I am currently running I have a vague idea of what terminal lines to run: lshw: resources: irq:17 memory:f7d00000-f7dfffff *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth2 version: 01 serial: dc:85:de:56:c4:ea width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.20.155.1 (r326264) latency=0 multicast=yes wireless=IEEE 802.11abg resources: irq:17 memory:f7d00000-f7d03fff iwconfig: eth1 no wireless extensions. eth2 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off lo no wireless extensions. I am new and excited to start my Ubuntu and Linux life and this is only the first of my few hic cups i am sure! :) Thanks all UPDATE: Report from 2nd answer talon@Black1015E:~$ sudo apt-get remove --purge bcmwl-kernel-source [sudo] password for talon: Reading package lists... Done Building dependency tree Reading state information... Done Package 'bcmwl-kernel-source' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. talon@Black1015E:~$ wget http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb --2013-10-22 18:50:32-- http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb Resolving us.archive.ubuntu.com (us.archive.ubuntu.com)... 2001:67c:1562::15, 2001:67c:1562::13, 2001:67c:1562::14, ... Connecting to us.archive.ubuntu.com (us.archive.ubuntu.com)|2001:67c:1562::15|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1181334 (1.1M) [application/x-debian-package] Saving to: ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ 100%[======================================>] 1,181,334 3.37MB/s in 0.3s 2013-10-22 18:50:33 (3.37 MB/s) - ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ saved [1181334/1181334] talon@Black1015E:~$ arvh No command 'arvh' found, did you mean: Command 'arch' from package 'coreutils' (main) arvh: command not found talon@Black1015E:~$ arch x86_64 talon@Black1015E:~$ sudo dpkg -i bcmwl*.deb Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 171895 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... First Installation: checking all kernels... Building only for 3.8.0-32-generic Building for architecture x86_64 Building initial module for 3.8.0-32-generic Done. wl: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.8.0-32-generic/updates/dkms/ depmod........ DKMS: install completed. Error: Module b43 is not currently loaded Error: Module b43legacy is not currently loaded Error: Module ssb is not currently loaded Error: Module bcm43xx is not currently loaded Error: Module brcm80211 is not currently loaded Error: Module brcmfmac is not currently loaded update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-32-generic rebooting now

  Read the article

• Move over DFS and Robocopy, here is SyncToy!

  - by andywe

  Ever since Windows 2000, I have always had the need to replicate data to multiple endpoints with the same content. Until DFS was introduced, the method of thinking was to either manually copy the data location by location, or to batch script it with xcopy and schedule a task. Even though this worked (and still does today), it was cumbersome, and intensive on the network, especially when dealing with larger amounts of data. Then along came robocopy, as an internal tool written by an enterprising programmer at Microsoft. We used it quite a bit, especially when we could not use DFS in the early days. It was received so well, it made it into the public realm. At least now we could have the ability to determine what files had changed and only replicate those. Well, over time there has been evolution of this ideal. DFS is obviously the Windows enterprise class service to do this, along with BrancheCache..however you don’t always need or want the power of DFS, especially when it comes to small datacenter installations, or remote offices. I have specific data sets that are on closed or restricted networks, that either have a security need for this, or are in remote countries where bandwidth is a premium. FOr this, I use the latest evolution for one off replication names Synctoy. Synctoy is from Microsoft, seemingly released in 2009, that wraps a nice GUI around setting up a paired set of folders (remember the mobile briefcase from Windows 98?), and allowing you the choice of synchronization methods. 1 way, or 2 way. Simply create a paired set of folders on the source and destination, choose your options for content, exclude any file types you don’t want to replicate, and click run. Scheduling is even easier. MS has included a wrapper for doing just this so all you enter in your task schedule in the SynToyCMD.exe, a –R as an argument, and the time schedule. No more complicated command lines or scripts.   I find this especially useful when I use MS backup to back up a system volume, but only want subsets of backup information of a data share and ONLY when that dataset has changed. Not relying on full backups and incremental. An example of this is my application installation master share. I back this up with SyncToy because I do not need multiple backup copies..one copy elsewhere suffices to back it up. At home, very useful for your pictures, videos, music, ect..the backup is online and ready to access, not waiting for you to restore a backup file, and no need to institute a domain simply to have DFS.'   Do note there is a risk..if you accidently delete a file and do not catch this before the next sync, then depending on your SyncToy settings, you can indeed lose that file as the destination updates..so due diligence applies. I make it a rule to sync manly one way…I use my master share for making changes, and allow the schedule to follow suit. Any real important file I lock down as read only through file permissions so it cannot be deleted unless I intervene.   Check out the tool and have some fun! http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=15155

  Read the article

< Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >