Search Results

Search found 13889 results on 556 pages for 'results'.

Page 519/556 | < Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >

  • Python - 2 Questions: Editing a variable in a function and changing the order of if else statements

    - by Eric
    First of all, I should explain what I'm trying to do first. I'm creating a dungeon crawler-like game, and I'm trying to program the movement of computer characters/monsters in the map. The map is basically a Cartesian coordinate grid. The locations of characters are represented by tuples of the x and y values, (x,y). The game works by turns, and in a turn a character can only move up, down, left or right 1 space. I'm creating a very simple movement system where the character will simply make decisions to move on a turn by turn basis. Essentially a 'forgetful' movement system. A basic flow chart of what I'm intending to do: Find direction towards destination Make a priority list of movements to be done using the direction eg.('r','u','d','l') means it would try to move right first, then up, then down, then left. Try each of the possibilities following the priority order. If the first movement fails (blocked by obstacle etc.), then it would successively try the movements until the first one that is successful, then it would stop. At step 3, the way I'm trying to do it is like this: def move(direction,location): try: -snip- # Tries to move, raises the exception Movementerror if cannot move in the direction return 1 # Indicates movement successful except Movementerror: return 0 # Indicates movement unsuccessful (thus character has not moved yet) prioritylist = ('r','u','d','l') if move('r',location): pass elif move('u',location): pass elif move('d',location): pass elif move('l',location): pass else: pass In the if/else block, the program would try the first movement on the priority on the priority list. At the move function, the character would try to move. If the character is not blocked and does move, it returns 1, leading to the pass where it would stop. If the character is blocked, it returns 0, then it tries the next movement. However, this results in 2 problems: How do I edit a variable passed into a function inside the function itself, while returning if the edit is successful? I have been told that you can't edit a variable inside a function as it won't really change the value of the variable, it just makes the variable inside the function refer to something else while the original variable remain unchanged. So, the solution is to return the value and then assign the variable to the returned value. However, I want it to return another value indicating if this edit is successful, so I want to edit this variable inside the function itself. How do I do so? How do I change the order of the if/else statements to follow the order of the priority list? It needs to be able to change during runtime as the priority list can change resulting in a different order of movement to try.

    Read the article

  • Registration form validation not validating

    - by jgray
    I am a noob when it comes to web development. I am trying to validate a registration form and to me it looks right but it will not validate.. This is what i have so far and i am validating through a repository or database. Any help would be greatly appreciated. thanks <?php session_start(); $title = "User Registration"; $keywords = "Name, contact, phone, e-mail, registration"; $description = "user registration becoming a member."; require "partials/_html_header.php"; //require "partials/_header.php"; require "partials/_menu.php"; require "DataRepository.php"; // if all validation passed save user $db = new DataRepository(); // form validation goes here $first_nameErr = $emailErr = $passwordErr = $passwordConfirmErr = ""; $first_name = $last_name = $email = $password = $passwordConfirm = ""; if(isset($_POST['submit'])) { $valid = TRUE; // check if all fields are valid { if ($_SERVER["REQUEST_METHOD"] == "POST") { if (empty($_POST["first_name"])) {$first_nameErr = "Name is required";} else { // $first_name = test_input($_POST["first_name"]); // check if name only contains letters and whitespace if (!preg_match("/^[a-zA-Z ]*$/",$first_name)) { $first_nameErr = "Only letters and white space allowed"; } } if (empty($_POST["email"])) {$emailErr = "Email is required";} else { // $email = test_input($_POST["email"]); // check if e-mail address syntax is valid if (!preg_match("/([\w\-]+\@[\w\-]+\.[\w\-]+)/",$email)) { $emailErr = "Invalid email format"; } } if (!preg_match("/(......)/",$password)) { $passwordErr = "Subject must contain THREE or more characters!"; } if ($_POST['password']!= $_POST['passwordConfirm']) { echo("Oops! Password did not match! Try again. "); } function test_input($data) { $data = trim($data); $data = stripslashes($data); $data = htmlspecialchars($data); return $data; } } } if(!$db->isEmailUnique($_POST['email'])) { $valid = FALSE; //display errors in the correct places } // if still valid save the user if($valid) { $new_user = array( 'first_name' => $_POST['first_name'], 'last_name' => $_POST['last_name'], 'email' => $_POST['email'], 'password' => $_POST['password'] ); $results = $db->saveUser($new_user); if($results == TRUE) { header("Location: login.php"); } else { echo "WTF!"; exit; } } } ?> <head> <style> .error {color: #FF0000;} </style> </head> <h1 class="center"> World Wide Web Creations' User Registration </h1> <p><span class="error"></span><p> <form method="POST" action="<?php echo htmlspecialchars($_SERVER["PHP_SELF"]);?>" onsubmit="return validate_form()" > First Name: <input type="text" name="first_name" id="first_name" value="<?php echo $first_name;?>" /> <span class="error"> <?php echo $first_nameErr;?></span> <br /> <br /> Last Name(Optional): <input type="text" name="last_name" id="last_name" value="<?php echo $last_name;?>" /> <br /> <br /> E-mail: <input type="email" name="email" id="email" value="<?php echo $email;?>" /> <span class="error"> <?php echo $emailErr;?></span> <br /> <br /> Password: <input type="password" name="password" id="password" value="" /> <span class="error"> <?php echo $passwordErr;?></span> <br /> <br /> Confirmation Password: <input type="password" name="passwordConfirm" id="passwordConfirm" value="" /> <span class="error"> <?php echo $passwordConfirmErr;?></span> <br /> <br /> <br /> <br /> <input type="submit" name="submit" id="submit" value="Submit Data" /> <input type="reset" name="reset" id="reset" value="Reset Form" /> </form> </body> </html> <?php require "partials/_footer.php"; require "partials/_html_footer.php"; ?> class DataRepository { // version number private $version = "1.0.3"; // turn on and off debugging private static $debug = FALSE; // flag to (re)initialize db on each call private static $initialize_db = FALSE; // insert test data on initialization private static $load_default_data = TRUE; const DATAFILE = "203data.txt"; private $data = NULL; private $errors = array(); private $user_fields = array( 'id' => array('required' => 0), 'created_at' => array('required' => 0), 'updated_at' => array('required' => 0), 'first_name' => array('required' => 1), 'last_name' => array('required' => 0), 'email' => array('required' => 1), 'password' => array('required' => 1), 'level' => array('required' => 0, 'default' => 2), ); private $post_fields = array( 'id' => array('required' => 0), 'created_at' => array('required' => 0), 'updated_at' => array('required' => 0), 'user_id' => array('required' => 1), 'title' => array('required' => 1), 'message' => array('required' => 1), 'private' => array('required' => 0, 'default' => 0), ); private $default_user = array( 'id' => 1, 'created_at' => '2013-01-01 00:00:00', 'updated_at' => '2013-01-01 00:00:00', 'first_name' => 'Admin Joe', 'last_name' => 'Tester', 'email' => '[email protected]', 'password' => 'a94a8fe5ccb19ba61c4c0873d391e987982fbbd3', 'level' => 1, ); private $default_post = array( 'id' => 1, 'created_at' => '2013-01-01 00:00:00', 'updated_at' => '2013-01-01 00:00:00', 'user_id' => 1, 'title' => 'My First Post', 'message' => 'This is the message of the first post.', 'private' => 0, ); // constructor will load existing data into memory // if it does not exist it will create it and initialize if desired public function __construct() { // check if need to reset if(DataRepository::$initialize_db AND file_exists(DataRepository::DATAFILE)) { unlink(DataRepository::DATAFILE); } // if file doesn't exist, create the initial datafile if(!file_exists(DataRepository::DATAFILE)) { $this->log("Data file does not exist. Attempting to create it... (".__FUNCTION__.":".__LINE__.")"); // create initial file $this->data = array( 'users' => array( ), 'posts' => array() ); // load default data if needed if(DataRepository::$load_default_data) { $this->data['users'][1] = $this->default_user; $this->data['posts'][1] = $this->default_post; } $this->writeTheData(); } // load the data into memory for use $this->loadTheData(); } private function showErrors($break = TRUE, $type = NULL) { if(count($this->errors) > 0) { echo "<div style=\"color:red;font-weight: bold;font-size: 1.3em\":<h3>$type Errors</h3><ol>"; foreach($this->errors AS $error) { echo "<li>$error</li>"; } echo "</ol></div>"; if($break) { "</br></br></br>Exiting because of errors!"; exit; } } } private function writeTheData() { $this->log("Attempting to write the datafile: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")"); file_put_contents(DataRepository::DATAFILE, json_encode($this->data)); $this->log("Datafile written: ".DataRepository::DATAFILE." (line: ".__LINE__.")"); } private function loadTheData() { $this->log("Attempting to load the datafile: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")"); $this->data = json_decode(file_get_contents(DataRepository::DATAFILE), true); $this->log("Datafile loaded: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")", $this->data); } private function validateFields(&$info, $fields, $pre_errors = NULL) { // merge in any pre_errors if($pre_errors != NULL) { $this->errors = array_merge($this->errors, $pre_errors); } // check all required fields foreach($fields AS $field => $reqs) { if(isset($reqs['required']) AND $reqs['required'] == 1) { if(!isset($info[$field]) OR strlen($info[$field]) == 0) { $this->errors[] = "$field is a REQUIRED field"; } } // set any default values if not present if(isset($reqs['default']) AND (!isset($info[$field]) OR $info[$field] == "")) { $info[$field] = $reqs['default']; } } $this->showErrors(); if(count($this->errors) == 0) { return TRUE; } else { return FALSE; } } private function validateUser(&$user_info) { // check if the email is already in use $this->log("About to check pre_errors: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")", $user_info); $pre_errors = NULL; if(isset($user_info['email'])) { if(!$this->isEmailUnique($user_info['email'])) { $pre_errors = array('The email: '.$user_info['email'].' is already used in our system'); } } $this->log("After pre_error check: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")", $pre_errors); return $this->validateFields($user_info, $this->user_fields, $pre_errors); } private function validatePost(&$post_info) { // check if the user_id in the post actually exists $this->log("About to check pre_errors: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")", $post_info); $pre_errors = NULL; if(isset($post_info['user_id'])) { if(!isset($this->data['users'][$post_info['user_id']])) { $pre_errors = array('The posts must belong to a valid user. (User '.$post_info['user_id'].' does not exist in the data'); } } $this->log("After pre_error check: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")", $pre_errors); return $this->validateFields($post_info, $this->post_fields, $pre_errors); } private function log($message, $data = NULL) { $style = "background-color: #F8F8F8; border: 1px solid #DDDDDD; border-radius: 3px; font-size: 13px; line-height: 19px; overflow: auto; padding: 6px 10px;"; if(DataRepository::$debug) { if($data != NULL) { $dump = "<div style=\"$style\"><pre>".json_encode($data, JSON_PRETTY_PRINT)."</pre></div>"; } else { $dump = NULL; } echo "<code><b>Debug:</b> $message</code>$dump<br />"; } } public function saveUser($user_info) { $this->log("Entering saveUser: (".__FUNCTION__.":".__LINE__.")", $user_info); $mydata = array(); $update = FALSE; // check for existing data if(isset($user_info['id']) AND $this->data['users'][$user_info['id']]) { $mydata = $this->data['users'][$user_info['id']]; $this->log("Loaded prior user: ".print_r($mydata, TRUE)." (".__FUNCTION__.":".__LINE__.")"); } // copy over existing values $this->log("Before copying over existing values: (".__FUNCTION__.":".__LINE__.")", $mydata); foreach($user_info AS $k => $v) { $mydata[$k] = $user_info[$k]; } $this->log("After copying over existing values: (".__FUNCTION__.":".__LINE__.")", $mydata); // check required fields if($this->validateUser($mydata)) { // hash password if new if(isset($mydata['password'])) { $mydata['password'] = sha1($mydata['password']); } // if no id, add the next available one if(!isset($mydata['id']) OR (int)$mydata['id'] < 1) { $this->log("No id set: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")"); if(count($this->data['users']) == 0) { $mydata['id'] = 1; $this->log("Setting id to 1: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")"); } else { $mydata['id'] = max(array_keys($this->data['users']))+1; $this->log("Found max id and added 1 [".$mydata['id']."]: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")"); } } // set created date if null if(!isset($mydata['created_at'])) { $mydata['created_at'] = date ("Y-m-d H:i:s", time()); } // update modified time $mydata['modified_at'] = date ("Y-m-d H:i:s", time()); // copy into data and save $this->log("Before data save: (".__FUNCTION__.":".__LINE__.")", $this->data); $this->data['users'][$mydata['id']] = $mydata; $this->writeTheData(); } return TRUE; } public function getUserById($id) { if(isset($this->data['users'][$id])) { return $this->data['users'][$id]; } else { return array(); } } public function isEmailUnique($email) { // find the user that has the right username/password foreach($this->data['users'] AS $k => $v) { $this->log("Checking unique email: {$v['email']} == $email (".__FUNCTION__.":".__LINE__.")", NULL); if($v['email'] == $email) { $this->log("FOUND NOT unique email: {$v['email']} == $email (".__FUNCTION__.":".__LINE__.")", NULL); return FALSE; break; } } $this->log("Email IS unique: $email (".__FUNCTION__.":".__LINE__.")", NULL); return TRUE; } public function login($username, $password) { // hash password for validation $password = sha1($password); $this->log("Attempting to login with $username / $password: (".__FUNCTION__.":".__LINE__.")", NULL); $user = NULL; // find the user that has the right username/password foreach($this->data['users'] AS $k => $v) { if($v['email'] == $username AND $v['password'] == $password) { $user = $v; break; } } $this->log("Exiting login: (".__FUNCTION__.":".__LINE__.")", $user); return $user; } public function savePost($post_info) { $this->log("Entering savePost: (".__FUNCTION__.":".__LINE__.")", $post_info); $mydata = array(); // check for existing data if(isset($post_info['id']) AND $this->data['posts'][$post_info['id']]) { $mydata = $this->data['posts'][$post_info['id']]; $this->log("Loaded prior posts: ".print_r($mydata, TRUE)." (".__FUNCTION__.":".__LINE__.")"); } $this->log("Before copying over existing values: (".__FUNCTION__.":".__LINE__.")", $mydata); foreach($post_info AS $k => $v) { $mydata[$k] = $post_info[$k]; } $this->log("After copying over existing values: (".__FUNCTION__.":".__LINE__.")", $mydata); // check required fields if($this->validatePost($mydata)) { // if no id, add the next available one if(!isset($mydata['id']) OR (int)$mydata['id'] < 1) { $this->log("No id set: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")"); if(count($this->data['posts']) == 0) { $mydata['id'] = 1; $this->log("Setting id to 1: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")"); } else { $mydata['id'] = max(array_keys($this->data['posts']))+1; $this->log("Found max id and added 1 [".$mydata['id']."]: ".DataRepository::DATAFILE." (".__FUNCTION__.":".__LINE__.")"); } } // set created date if null if(!isset($mydata['created_at'])) { $mydata['created_at'] = date ("Y-m-d H:i:s", time()); } // update modified time $mydata['modified_at'] = date ("Y-m-d H:i:s", time()); // copy into data and save $this->data['posts'][$mydata['id']] = $mydata; $this->log("Before data save: (".__FUNCTION__.":".__LINE__.")", $this->data); $this->writeTheData(); } return TRUE; } public function getAllPosts() { return $this->loadPostsUsers($this->data['posts']); } public function loadPostsUsers($posts) { foreach($posts AS $id => $post) { $posts[$id]['user'] = $this->getUserById($post['user_id']); } return $posts; } public function dump($line_number, $temp = 'NO') { // if(DataRepository::$debug) { if($temp == 'NO') { $temp = $this->data; } echo "<pre>Dumping from line: $line_number\n"; echo json_encode($temp, JSON_PRETTY_PRINT); echo "</pre>"; } } } /* * Change Log * * 1.0.0 * - first version * 1.0.1 * - Added isEmailUnique() function for form validation and precheck on user save * 1.0.2 * - Fixed getAllPosts() to include the post's user info * - Added loadPostsUsers() to load one or more posts with their user info * 1.0.3 * - Added autoload to always add admin Joe. */

    Read the article

  • Users and roles in context

    - by Eric W.
    I'm trying to get a sense of how to implement the user/role relationships for an application I'm writing. The persistence layer is Google App Engine's datastore, which places some interesting (but generally beneficial) constraints on what can be done. Any thoughts are appreciated. It might be helpful to keep things very concrete. I would like there to be organizations, users, test content and test administrations (records of tests that have been taken). A user can have the role of participant (test-taker), contributor of test material or both. A user can also be a member of zero or more organizations. In the role of participant, the user can see the previous administrations of tests he or she has taken. The user can also see a test administration of another participant if that participant has given the user authorization. The user can see test material that has been made public, and he or she can see restricted content as a participant during a specific administration of a test for which that user has been authorized by an organization. As a member of an organization, the user can see restricted content in the role of contributor, and he or she might or might not also be able to edit the content. Each organization should have one or more administrators that can determine whether a member can see and edit content and determine who has admin privileges. There should also be one or more application-wide superusers that can troubleshoot and solve problems. Members of organizations can see the administrations of tests that the participants concerned have authorized them to see, and they can see anonymous data if no authorization has been given. A user cannot see the test results of another user in any other circumstances. Since there are no joins in the App Engine datastore, it might be necessary to have things less normalized than usual for the typical SQL database in order to ensure that queries that check permissions are fast (e.g., ones that determine whether a link is to be displayed). My questions are: How do I move forward on this? Should I spend a lot of time up front in order to get the model right, or can I iterate several times and gradually roll in additional complexity? Does anyone have some general ideas about how to break things up in this instance? Are there any GAE libraries that handle roles in a way that is compatible with this arrangement?

    Read the article

  • Indexing on only part of a field in MongoDB

    - by Rob Hoare
    Is there a way to create an index on only part of a field in MongoDB, for example on the first 10 characters? I couldn't find it documented (or asked about on here). The MySQL equivalent would be CREATE INDEX part_of_name ON customer (name(10));. Reason: I have a collection with a single field that varies in length from a few characters up to over 1000 characters, average 50 characters. As there are a hundred million or so documents it's going to be hard to fit the full index in memory (testing with 8% of the data the index is already 400MB, according to stats). Indexing just the first part of the field would reduce the index size by about 75%. In most cases the search term is quite short, it's not a full-text search. A work-around would be to add a second field of 10 (lowercased) characters for each item, index that, then add logic to filter the results if the search term is over ten characters (and that extra field is probably needed anyway for case-insensitive searches, unless anybody has a better way). Seems like an ugly way to do it though. [added later] I tried adding the second field, containing the first 12 characters from the main field, lowercased. It wasn't a big success. Previously, the average object size was 50 bytes, but I forgot that includes the _id and other overheads, so my main field length (there was only one) averaged nearer to 30 bytes than 50. Then, the second field index contains the _id and other overheads. Net result (for my 8% sample) is the index on the main field is 415MB and on the 12 byte field is 330MB - only a 20% saving in space, not worthwhile. I could duplicate the entire field (to work around the case insensitive search problem) but realistically it looks like I should reconsider whether MongoDB is the right tool for the job (or just buy more memory and use twice as much disk space). [added even later] This is a typical document, with the source field, and the short lowercased field: { "_id" : ObjectId("505d0e89f56588f20f000041"), "q" : "Continental Airlines", "f" : "continental " } Indexes: db.test.ensureIndex({q:1}); db.test.ensureIndex({f:1}); The 'f" index, working on a shorter field, is 80% of the size of the "q" index. I didn't mean to imply I included the _id in the index, just that it needs to use that somewhere to show where the index will point to, so it's an overhead that probably helps explain why a shorter key makes so little difference. Access to the index will be essentially random, no part of it is more likely to be accessed than any other. Total index size for the full file will likely be 5GB, so it's not extreme for that one index. Adding some other fields for other search cases, and their associated indexes, and copies of data for lower case, does start to add up, which I why I started looking into a more concise index.

    Read the article

  • Why is the page still caching even after the no-cache headers have been sent?

    - by Matthew Grasinger
    I've done a ton of research on this and have asked many people with help and still no success. Here are the details... I'm involved in developing a website that pulls data from various data files, combines them in a temp .csv file, and then is graphed using a popular graphing library: dygraphs. The bulk of the website is written in PHP. The parameters that determine the data that is graphed are stored in the users session, the .csv is named after the users session and available for download, and then the .csv file is written in a script that passes it to the dygraphs object. And we've found, even with the no-cache headers sent: header("Cache-Control: no-cache, must-revalidate"); header("Expires: Sat, 26 Jul 1997 05:00:00 GMT"); Many users experience in the middle of a session, (if enough different graphs are generated) the page displaying an older, static rendering of the page (data they had graphed earlier in the session) as if it were cached and loaded instead of getting a new request. It only gets weirder though: I've checked using developer tools in both Firefox and Chrome and both browsers are receiving the no-cache headers just fine; Even when the problem occurs if you view the page source, the source is the correct content (a table/legend is also dynamically created using php, the source shows the correct table, but what is rendered is older content); the page begins to render correctly until the graph is about to be display, and then shows the older content; the older content displays as if it were a completely static overlay--the cached graph does not have the same dynamic features (roll over data point display, zoom and pan, etc.) And it is as if the correct page were somewhere beneath it (the download button for the csv file moves depending on how large the table is. The older, static page does nothing if you click the download .csv button, but if you can manage to find the one in the page beneath it you can click and still download the .csv. The data in the .csv is correct) It is one of the strangest things I've seen in development thus far. Some other relevant facts are that all the problems I've personally experience occurred while I was using Chrome. Non of these symptoms have been reported by Firefox users. IE users have had the same problems (IE users are forced to use chrome frame). I'm at my wits end at this point. We've sent the php headers; we've tried setting the cache profile for php on IIS as "DisableCache" (or whatever); we've tried sending a random query string to the results page; we've tried all the appropriate meta tags--all with no success.

    Read the article

  • IO::Pipe - close(<handle>) does not set $?

    - by danboo
    My understanding is that closing the handle for an IO::Pipe object should be done with the method ($fh->close) and not the built-in (close($fh)). The other day I goofed and used the built-in out of habit on a IO::Pipe object that was opened to a command that I expected to fail. I was surprised when $? was zero, and my error checking wasn't triggered. I realized my mistake. If I use the built-in, IO:Pipe can't perform the waitpid() and can't set $?. But what I was surprised by was that perl seemed to still close the pipe without setting $? via the core. I worked up a little test script to show what I mean: use 5.012; use warnings; use IO::Pipe; say 'init pipes:'; pipes(); my $fh = IO::Pipe->reader(q(false)); say 'post open pipes:'; pipes(); say 'return: ' . $fh->close; #say 'return: ' . close($fh); say 'status: ' . $?; say q(); say 'post close pipes:'; pipes(); sub pipes { for my $fd ( glob("/proc/self/fd/*") ) { say readlink($fd) if -p $fd; } say q(); } When using the method it shows the pipe being gone after the close and $? is set as I expected: init pipes: post open pipes: pipe:[992006] return: 1 status: 256 post close pipes: And, when using the built-in it also appears to close the pipe, but does not set $?: init pipes: post open pipes: pipe:[952618] return: 1 status: 0 post close pipes: It seems odd to me that the built-in results in the pipe closure, but doesn't set $?. Can anyone help explain the discrepancy? Thanks!

    Read the article

  • SQL Server 2008 R2 Enterprise won't install on Windows 2008 R2 Enterprise

    - by Carlos Paulino
    I've been trying to install SQL Server on a new Windows Server 2008. I have tried everything but I haven't been able to narrow down the problem. When the installation fails I get " Exit code (Decimal): -2068643839". The problem with this is that according to Microsoft this is a generic error code. I follow their guide to look into the detail.txt inside C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\ But I can't find something that specifies the exact error. Any suggestions ? Thanks in advanced. I uploaded to detail.txt to http://www.megaupload.com/?d=0MV46SZH because it is to big to paste here. Below is the summary.txt ---------- Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2011-02-28 11:29:56 End time: 2011-02-28 11:34:45 Requested action: Install Machine Properties: Machine name: SA-SERVER Machine processor count: 8 OS version: Windows Server 2008 R2 OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: F:\x64\setup\ Installation edition: ENTERPRISE User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\SYSTEM AGTSVCPASSWORD: ***** AGTSVCSTARTUPTYPE: Manual ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: <empty> ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: <empty> ASSVCPASSWORD: ***** ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: <empty> ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Disabled CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini CUSOURCE: ENABLERANU: False ENU: True ERRORREPORTING: False FARMACCOUNT: <empty> FARMADMINPORT: 0 FARMPASSWORD: ***** FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK,OCS FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: <empty> FTSVCACCOUNT: <empty> FTSVCPASSWORD: ***** HELP: False IACCEPTSQLSERVERLICENSETERMS: False INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\ INSTALLSQLDATADIR: <empty> INSTANCEDIR: D:\SQLServer INSTANCEID: MSSQLSERVER INSTANCENAME: MSSQLSERVER ISSVCACCOUNT: NT AUTHORITY\SYSTEM ISSVCPASSWORD: ***** ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: ***** PCUSOURCE: PID: ***** QUIET: False QUIETSIMPLE: False ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: ***** RSSVCSTARTUPTYPE: Automatic SAPWD: ***** SECURITYMODE: SQL SQLBACKUPDIR: <empty> SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT AUTHORITY\SYSTEM SQLSVCPASSWORD: ***** SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SA-SERVER\Administrator SQLTEMPDBDIR: <empty> SQLTEMPDBLOGDIR: <empty> SQLUSERDBDIR: <empty> SQLUSERDBLOGDIR: <empty> SQMREPORTING: False TCPENABLED: 1 UIMODE: Normal X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Integration Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Connectivity Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Complete Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Backwards Compatibility Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Business Intelligence Development Studio Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Microsoft Sync Framework Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\SystemConfigurationCheck_Report.htm

    Read the article

  • sendmail can not relay from itself

    - by Bernie
    I am running 3 centos 5.2 servers and I have configured the server for forward all messages to root to be emailed to me via .forward rule. This is working fine on two of the servers but not on the third. I have also tried copying the mail config files from the backup server and placing them on the file server and restarting sendmail. I also removed and reinstalled sendmail via yum but the results are the same. I am not sure what the issue could be they are all standard centos installs. Here is an example from the backup server which is working and the fileserver which isn't I am also going to include the mail log. good from backup server [root@backup ]# sendmail -v [email protected] < test.mail [email protected]... Connecting to [127.0.0.1] via relay... 220 backup.localhost ESMTP Sendmail 8.13.8/8.13.8; Fri, 16 Oct 2009 10:23:50 -0700 >>> EHLO backup.localhost 250-backup.localhost Hello backup.localhost [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 250-DSN 250-ETRN 250-DELIVERBY 250 HELP >>> MAIL From:<[email protected]> SIZE=73 250 2.1.0 <[email protected]>... Sender ok >>> RCPT To:<[email protected]> >>> DATA 250 2.1.5 <[email protected]>... Recipient ok 354 Enter mail, end with "." on a line by itself >>> . 250 2.0.0 n9GHNoGC020924 Message accepted for delivery [email protected]... Sent (n9GHNoGC020924 Message accepted for delivery) Closing connection to [127.0.0.1] >>> QUIT 221 2.0.0 backup.localhost closing connection bad from file server [root@fileserver bernie]# sendmail -v [email protected] < test.mail [email protected]... Connecting to [127.0.0.1] via relay... 220 fileserver.localhost ESMTP Sendmail 8.13.8/8.13.8; Fri, 16 Oct 2009 10:23:26 -0700 >>> EHLO fileserver.localhost 250-fileserver.localhost Hello fileserver.localhost [127.0.0.1], pleased to meet you 250 ENHANCEDSTATUSCODES >>> MAIL From:<[email protected]> 550 5.0.0 Access denied root... Using cached ESMTP connection to [127.0.0.1] via relay... >>> RSET 250 2.0.0 Reset state >>> MAIL From:<> 550 5.0.0 Access denied postmaster... Using cached ESMTP connection to [127.0.0.1] via relay... >>> RSET 250 2.0.0 Reset state >>> MAIL From:<> 550 5.0.0 Access denied Closing connection to [127.0.0.1] >>> QUIT 221 2.0.0 fileserver.localhost closing connection mail log Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDom028059: from=root, size=72, class=0, nrcpts=1, msgid=<[email protected]>, relay=root@localhost Oct 16 10:39:13 fileserver sendmail[28060]: n9GHdDwl028060: tcpwrappers (fileserver.localhost, 127.0.0.1) rejection Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDom028059: [email protected], ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30072, relay=[127.0.0.1] [127.0.0.1], dsn=5.0.0, stat=Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDom028059: n9GHdDon028059: DSN: Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDon028059: to=root, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31096, relay=[127.0.0.1], dsn=5.0.0, stat=Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDon028059: n9GHdDoo028059: return to sender: Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDoo028059: to=postmaster, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=32120, relay=[127.0.0.1], dsn=5.0.0, stat=Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDon028059: Losing ./qfn9GHdDon028059: savemail panic Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDon028059: SYSERR(root): savemail: cannot save rejected email anywhere

    Read the article

  • iproute2 not functioning ("RTNETLINK answers: Operation not supported")

    - by James Watt
    The command and error message: gtwy ~ # ip rule add from 64.251.23.186 table t1 RTNETLINK answers: Operation not supported Older article of the same problem, but it did not help me: http://forums.gentoo.org/viewtopic-t-696982-start-0-postdays-0-postorder-asc-highlight-.html I have looked on google at great lengths to try to find a solution. It seems that my kernel configuration is missing something? Any help or ideas would be appreciated. My system/kernel is: 2.6.36-gentoo-r5 #3 SMP Thu Jan 13 10:49:06 EST 2011 x86_64 Intel(R) Xeon(R) CPU X3220 @ 2.40GHz GenuineIntel GNU/Linux. I am posting this on SuperUser since this system is used as a workstation and this problem is unrelated to specific tasks that are handled exclusively by servers. iproute2 is installed: gtwy etc # emerge --search iproute2 Searching... [ Results for search key : iproute2 ] [ Applications found : 1 ] * sys-apps/iproute2 Latest version available: 2.6.35-r2 Latest version installed: 2.6.35-r2 Size of files: 378 kB Homepage: http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2 Description: kernel routing and traffic control utilities License: GPL-2 A small snippet of my kernel .config (view entire .config): gtwy linux # cat .config | grep NETLINK CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CT_NETLINK=y CONFIG_SCSI_NETLINK=y gtwy linux # cat .config | grep IP_ADVANCED_ROUTER CONFIG_IP_ADVANCED_ROUTER=y gtwy linux # cat .config | grep INGRESS CONFIG_NET_SCH_INGRESS=y gtwy linux # cat .config | grep NET_SCHED CONFIG_NET_SCHED=y emerge --info Portage 2.1.9.25 (default/linux/amd64/10.0, gcc-4.1.2, glibc-2.10.1-r1, 2.6.36-gentoo-r5 x86_64) ================================================================= System uname: Linux-2.6.36-gentoo-r5-x86_64-Intel-R-_Xeon-R-_CPU_X3220_@_2.40GHz-with-gentoo-1.12.13 Timestamp of tree: Thu, 13 Jan 2011 01:15:01 +0000 app-shells/bash: 4.0_p37 dev-java/java-config: 1.3.7-r1, 2.1.10 dev-lang/python: 2.4.6, 2.5.4-r4, 2.6.5-r2, 3.1.2-r3 sys-apps/baselayout: 1.12.13 sys-apps/sandbox: 1.6-r2 sys-devel/autoconf: 2.13, 2.65 sys-devel/automake: 1.9.6-r2::<unknown repository>, 1.10.2, 1.11.1 sys-devel/binutils: 2.20.1-r1 sys-devel/gcc: 4.1.2, 4.3.4, 4.4.3-r2 sys-devel/gcc-config: 1.4.1 sys-devel/libtool: 2.2.6b sys-devel/make: 3.81 virtual/os-headers: 2.6.30-r1 (sys-kernel/linux-headers) ACCEPT_KEYWORDS="amd64" ACCEPT_LICENSE="*" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=nocona -O2 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /var/bind" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=nocona -O2 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch" GENTOO_MIRRORS="http://gentoo.chem.wisc.edu/gentoo" LC_ALL="en_US.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" LINGUAS="en" MAKEOPTS="-j5" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage" USE="acl amd64 apache2 berkdb bzip2 cli cracklib crypt ctype cups curl cxx dri fortran gdbm gpm iconv jpeg jpeg2k libwww mmx modules mudflap multilib mysql ncurses nls nptl nptlonly openmp pam pcre perl php png pppd python readline session sockets sse sse2 ssl symlink sysfs tcpd threads unicode vhosts xml xorg xsl zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

    Read the article

  • Persistent static routes fail on MacOS 10.6.5 startup!

    - by verbalicious
    I'm unable to get static routes to persist a reboot on Mac OS 10.6.5. I've tried all of the methods prescribed in Google search results, and previous posts on this site. I've tried manually creating a launchd daemon, and used RouteSplit's launchd daemon to no avail. It's clear that the interface is not ready when these methods attempt to apply the route. This workstation in question is getting its IP from DHCP and probably hasn't gotten its DHCP lease when the command runs. We're able to apply the route by hand when logged in, but not through startup methods. Is there another way to apply this route by sneaking the command into something later, but before the login window appears to the user? Here is some relevant log info from system.log. You can see the "route: writing to routing socket: Network is unreachable" errors where my launchd script fires off. I've tried adding extra "sleep" and "ipconfig waitall" statements later in the script but this doesn't fly. Dec 15 19:30:41 localhost com.apple.launchd[1]: *** launchd[1] has started up. *** Dec 15 19:30:45 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-258.13 (Oct 8 2010 17:10:30) starting Dec 15 19:30:47 localhost configd[15]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50) Dec 15 19:30:47 localhost configd[15]: DHCP en1: INIT transmit failed Dec 15 19:30:47 localhost configd[15]: network configuration changed. Dec 15 19:30:47 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:30:47 Administrators-MacBook-Pro blued[16]: Apple Bluetooth daemon started Dec 15 19:30:52 Administrators-MacBook-Pro syslog[67]: routes.sh: Starting RouteSplit Dec 15 19:30:53 Administrators-MacBook-Pro com.apple.usbmuxd[41]: usbmuxd-207 built for iTunesTenOne on Oct 19 2010 at 13:50:35, running 64 bit Dec 15 19:30:54 Administrators-MacBook-Pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[50]: Login Window Application Started Dec 15 19:30:55 Administrators-MacBook-Pro bootlog[61]: BOOT_TIME: 1292459441 0 Dec 15 19:30:55 Administrators-MacBook-Pro syslog[86]: routes.sh: static route 192.168.0.0/23 192.168.2.2 Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: route: writing to routing socket: Network is unreachable Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: add net 192.168.0.0: gateway 192.168.2.2: Network is unreachable Dec 15 19:30:57 Administrators-MacBook-Pro org.apache.httpd[38]: httpd: Could not reliably determine the server's fully qualified domain name, using Administrators-MacBook-Pro.local for ServerName Dec 15 19:30:58 Administrators-MacBook-Pro loginwindow[50]: Login Window Started Security Agent Dec 15 19:30:58 Administrators-MacBook-Pro WindowServer[89]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:30:58 Administrators-MacBook-Pro com.apple.WindowServer[89]: Wed Dec 15 19:30:58 Administrators-MacBook-Pro.local WindowServer[89] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:31:18 Administrators-MacBook-Pro configd[15]: network configuration changed. Dec 15 19:31:19 administrators-macbook-pro configd[15]: setting hostname to "administrators-macbook-pro.local" Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[121]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000 Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known Dec 15 19:31:27 administrators-macbook-pro configd[15]: network configuration changed. Dec 15 19:31:27 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:31:27 Administrators-MacBook-Pro ntpd[37]: Cannot find existing interface for address 17.151.16.20 Dec 15 19:31:27 Administrators-MacBook-Pro ntpd_initres[125]: ntpd indicates no data available! Dec 15 19:31:31 Administrators-MacBook-Pro sshd[128]: USER_PROCESS: 133 ttys000 Dec 15 19:31:37 Administrators-MacBook-Pro sudo[138]: administrator : TTY=ttys000 ; PWD=/Users/administrator ; USER=root ; COMMAND=/usr/bin/less /var/log/system.log ``You can see the following line in /var/log/kernel.log that shows the en0 interface coming up: Dec 15 19:30:51 Administrators-MacBook-Pro kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,0f01,0de1,0300,c1e1,3800]

    Read the article

  • GMail suspects confirmation email in stealing personal information

    - by Dennis Gorelik
    When user registers on my web site, web site sends user email confirmation link. Subject: Please confirm your email address Body:Please open this link in your browser to confirm your email address: http://www.postjobfree.com/a/c301718062444f96ba0e358ea833c9b3 This link will expire on: 6/9/2012 8:04:07 PM EST. If my web site sends that email to GMaill (either @gmail.com or another domain that's handled by Google Apps) and that user never emailed to email -- then GMail not only puts the email to spam folder, but also adds prominent red warning:Be careful with this message. Similar messages were used to steal people's personal information. Unless you trust the sender, don't click links or reply with personal information. Learn more That warning really scares many of my users, so they are afraid to open that link and confirm their email. What can I do about it? Ideally I would like that message end up in user's inbox, not spam folder. But at least how do I prevent that scary message? IP address of my mailing server is not blacklisted: http://www.mxtoolbox.com/SuperTool.aspx?action=blacklist%3a208.43.198.72 I use SPF and DKIM signature. Below is the email that ended up in spam folder with that scary red message. Delivered-To: [email protected] Received: by 10.112.84.98 with SMTP id x2csp36568lby; Fri, 8 Jun 2012 17:04:15 -0700 (PDT) Received: by 10.60.25.6 with SMTP id y6mr9110318oef.42.1339200255375; Fri, 08 Jun 2012 17:04:15 -0700 (PDT) Return-Path: Received: from smtp.postjobfree.com (smtp.postjobfree.com. [208.43.198.72]) by mx.google.com with ESMTP id v8si6058193oev.44.2012.06.08.17.04.14; Fri, 08 Jun 2012 17:04:15 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 208.43.198.72 as permitted sender) client-ip=208.43.198.72; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 208.43.198.72 as permitted sender) [email protected]; dkim=pass [email protected] DomainKey-Signature: a=rsa-sha1; c=nofws; q=dns; d=postjobfree.com; s=postjobfree.com; h= received:message-id:mime-version:from:to:date:subject:content-type; b=TCip/3hP1WWViWB1cdAzMFPjyi/aUKXQbuSTVpEO7qr8x3WdMFhJCqZciA69S0HB4 Koatk2cQQ3fOilr4ledCgZYemLSJgwa/ZRhObnqgPHAglkBy8/RAwkrwaE0GjLKup 0XI6G2wPlh+ReR+inkMwhCPHFInmvrh4evlBx/VlA= DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=postjobfree.com; s=postjobfree.com; h=content-type:subject:date:to:from:mime-version:message-id; bh=N59EIgRECIlAnd41LY4HY/OFI+v1p7t5M9yP+3FsKXY=; b=J3/BdZmpjzP4I6GA4ntmi4REu5PpOcmyzEL+6i7y7LaTR8tuc2h7fdW4HaMPlB7za Lj4NJPed61ErumO66eG4urd1UfyaRDtszWeuIbcIUqzwYpnMZ8ytaj8DPcWPE3JYj oKhcYyiVbgiFjLujib3/2k2PqDIrNutRH9Ln7puz4= Received: from sv3035 (sv3035 [208.43.198.72]) by smtp.postjobfree.com with SMTP; Fri, 8 Jun 2012 20:04:07 -0400 Message-ID: MIME-Version: 1.0 From: "PostJobFree Notification" To: [email protected] Date: 8 Jun 2012 20:04:07 -0400 Subject: Please confirm your email address Content-Type: multipart/alternative; boundary=--boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08 ----boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Please open this link in your browser to confirm your email addre= ss: =0D=0Ahttp://www.postjobfree.com/a/c301718062444f96ba0e358ea8= 33c9b3 =0D=0AThis link will expire on: 6/9/2012 8:04:07 PM EST. =0D=0A ----boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj1Db250ZW50LVR5cGUgY29udGVu dD0idGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij48L2hlYWQ+DQo8Ym9keT48ZGl2 Pg0KUGxlYXNlIG9wZW4gdGhpcyBsaW5rIGluIHlvdXIgYnJvd3NlciB0byBjb25m aXJtIHlvdXIgZW1haWwgYWRkcmVzczo8YnIgLz48YSBocmVmPSJodHRwOi8vd3d3 LnBvc3Rqb2JmcmVlLmNvbS9hL2MzMDE3MTgwNjI0NDRmOTZiYTBlMzU4ZWE4MzNj OWIzIj5odHRwOi8vd3d3LnBvc3Rqb2JmcmVlLmNvbS9hL2MzMDE3MTgwNjI0NDRm OTZiYTBlMzU4ZWE4MzNjOWIzPC9hPjxiciAvPlRoaXMgbGluayB3aWxsIGV4cGly ZSBvbjogNi85LzIwMTIgODowNDowNyBQTSBFU1QuPGJyIC8+DQo8L2Rpdj48L2Jv ZHk+PC9odG1sPg== ----boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08--

    Read the article

  • iptables not allowing mysql connections to aliased ips?

    - by Curtis
    I have a fairly simple iptables firewall on a server that provides MySQL services, but iptables seems to be giving me very inconsistent results. The default policy on the script is as follows: iptables -P INPUT DROP I can then make MySQL public with the following rule: iptables -A INPUT -p tcp --dport 3306 -j ACCEPT With this rule in place, I can connect to MySQL from any source IP to any destination IP on the server without a problem. However, when I try to restrict access to just three IPs by replacing the above line with the following, I run into trouble (xxx=masked octect): iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.184 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.196 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.251 -j ACCEPT Once the above rules are in place, the following happens: I can connect to the MySQL server from the .184, .196 and .251 hosts just fine as long as am connecting to the MySQL server using it's default IP address or an IP alias in the same subnet as the default IP address. I am unable to connect to MySQL using IP aliases that are assigned to the server from a different subnet than the server's default IP when I'm coming from the .184 or .196 hosts, but .251 works just fine. From the .184 or .196 hosts, a telnet attempt just hangs... # telnet 209.xxx.xxx.22 3306 Trying 209.xxx.xxx.22... If I remove the .251 line (making .196 the last rule added), the .196 host still can not connect to MySQL using IP aliases (so it's not the order of the rules that is causing the inconsistent behavior). I know, this particular test was silly as it shouldn't matter what order these three rules are added in, but I figured someone might ask. If I switch back to the "public" rule, all hosts can connect to the MySQL server using either the default or aliased IPs (in either subnet): iptables -A INPUT -p tcp --dport 3306 -j ACCEPT The server is running in a CentOS 5.4 OpenVZ/Proxmox container (2.6.32-4-pve). And, just in case you prefer to see the problem rules in the context of the iptables script, here it is (xxx=masked octect): # Flush old rules, old custom tables /sbin/iptables --flush /sbin/iptables --delete-chain # Set default policies for all three default chains /sbin/iptables -P INPUT DROP /sbin/iptables -P FORWARD DROP /sbin/iptables -P OUTPUT ACCEPT # Enable free use of loopback interfaces /sbin/iptables -A INPUT -i lo -j ACCEPT /sbin/iptables -A OUTPUT -o lo -j ACCEPT # All TCP sessions should begin with SYN /sbin/iptables -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Accept inbound TCP packets (Do this *before* adding the 'blocked' chain) /sbin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow the server's own IP to connect to itself /sbin/iptables -A INPUT -i eth0 -s 208.xxx.xxx.178 -j ACCEPT # Add the 'blocked' chain *after* we've accepted established/related connections # so we remain efficient and only evaluate new/inbound connections /sbin/iptables -N BLOCKED /sbin/iptables -A INPUT -j BLOCKED # Accept inbound ICMP messages /sbin/iptables -A INPUT -p ICMP --icmp-type 8 -j ACCEPT /sbin/iptables -A INPUT -p ICMP --icmp-type 11 -j ACCEPT # ssh (private) /sbin/iptables -A INPUT -p tcp --dport 22 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # ftp (private) /sbin/iptables -A INPUT -p tcp --dport 21 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # www (public) /sbin/iptables -A INPUT -p tcp --dport 80 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 443 -j ACCEPT # smtp (public) /sbin/iptables -A INPUT -p tcp --dport 25 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 2525 -j ACCEPT # pop (public) /sbin/iptables -A INPUT -p tcp --dport 110 -j ACCEPT # mysql (private) /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.184 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.196 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.251 -j ACCEPT Any ideas? Thanks in advance. :-)

    Read the article

  • Ubuntu 9.10 and Squid 2.7 Transparent Proxy TCP_DENIED

    - by user38400
    Hi, We've spent the last two days trying to get squid 2.7 to work with ubuntu 9.10. The computer running ubuntu has two network interfaces: eth0 and eth1 with dhcp running on eth1. Both interfaces have static ip's, eth0 is connected to the Internet and eth1 is connected to our LAN. We have followed literally dozens of different tutorials with no success. The tutorial here was the last one we did that actually got us some sort of results: http://www.basicconfig.com/linuxnetwork/setup_ubuntu_squid_proxy_server_beginner_guide. When we try to access a site like seriouswheels.com from the LAN we get the following message on the client machine: ERROR The requested URL could not be retrieved Invalid Request error was encountered while trying to process the request: GET / HTTP/1.1 Host: www.seriouswheels.com Connection: keep-alive User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/532.9 (KHTML, like Gecko) Chrome/5.0.307.11 Safari/532.9 Cache-Control: max-age=0 Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,/;q=0.5 Accept-Encoding: gzip,deflate,sdch Cookie: __utmz=88947353.1269218405.1.1.utmccn=(direct)|utmcsr=(direct)|utmcmd=(none); __qca=P0-1052556952-1269218405250; __utma=88947353.1027590811.1269218405.1269218405.1269218405.1; __qseg=Q_D Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Some possible problems are: Missing or unknown request method. Missing URL. Missing HTTP Identifier (HTTP/1.0). Request is too large. Content-Length missing for POST or PUT requests. Illegal character in hostname; underscores are not allowed. Your cache administrator is webmaster. Below are all the configuration files: /etc/squid/squid.conf, /etc/network/if-up.d/00-firewall, /etc/network/interfaces, /var/log/squid/access.log. Something somewhere is wrong but we cannot figure out where. Our end goal for all of this is the superimpose content onto every page that a client requests on the LAN. We've been told that squid is the way to do this but at this point in the game we are just trying to get squid setup correctly as our proxy. Thanks in advance. squid.conf acl all src all acl manager proto cache_object acl localhost src 127.0.0.1/32 acl to_localhost dst 127.0.0.0/8 acl localnet src 192.168.0.0/24 acl SSL_ports port 443 # https acl SSL_ports port 563 # snews acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access allow localnet http_access deny all icp_access allow localnet icp_access deny all http_port 3128 hierarchy_stoplist cgi-bin ? cache_dir ufs /var/spool/squid/cache1 1000 16 256 access_log /var/log/squid/access.log squid refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern (Release|Package(.gz)*)$ 0 20% 2880 refresh_pattern . 0 20% 4320 acl shoutcast rep_header X-HTTP09-First-Line ^ICY.[0-9] upgrade_http0.9 deny shoutcast acl apache rep_header Server ^Apache broken_vary_encoding allow apache extension_methods REPORT MERGE MKACTIVITY CHECKOUT cache_mgr webmaster cache_effective_user proxy cache_effective_group proxy hosts_file /etc/hosts coredump_dir /var/spool/squid access.log 1269243042.740 0 192.168.1.11 TCP_DENIED/400 2576 GET NONE:// - NONE/- text/html 00-firewall iptables -F iptables -t nat -F iptables -t mangle -F iptables -X echo 1 | tee /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -j MASQUERADE iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 3128 networking auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 142.104.109.179 netmask 255.255.224.0 gateway 142.104.127.254 auto eth1 iface eth1 inet static address 192.168.1.100 netmask 255.255.255.0

    Read the article

  • Redmine with Apache 2 + Passenger nightmare --- site is up and available, but Redmine doesn't execute

    - by CptSupermrkt
    I was determined to figure this out myself, but I've been at it for a total of more than 10 hours, and I just can't figure this out. First, let me detail my environment (which I cannot change): Server version: Apache/2.2.15 (Unix) Ruby version: ruby 1.9.3p448 Rails version: Rails 4.0.1 Passenger version: Phusion Passenger version 4.0.5 Redmine version: 2.3.3 I have followed the Redmine instructions all the way through the test webserver to check that installation was successful with this command: ruby script/rails server webrick -e production The roadblock which I cannot overcome is getting Apache and Passenger to interpret and properly serve Redmine. I have searched pretty much every possible link within the first 10 pages or so of Google results. Everywhere I go I come across conflicting/contradicting/outdated information. We have a "weird" setup with Apache (which I inherited and cannot change). Redmine needs to be served through SSL, but Apache already has another website it's serving through SSL called Twiki. By "weird", what I mean is that our file structure is entirely different from all the tutorials out there on this version of Apache which have directories like "available-sites" and such. Here are the abbreviated versions of some of our config files: /etc/httpd/conf/httpd.conf (the global configuration file --- note that NO VirtualHost is defined here): ServerRoot "/etc/httpd" ... LoadModule passenger_module /usr/local/pkg/ruby/1.9.3-p448/lib/ruby/gems/1.9.1/gems/passenger-4.0.5/libout/apache2/mod_passenger.so PassengerRoot /usr/local/pkg/ruby/1.9.3-p448/lib/ruby/gems/1.9.1/gems/passenger-4.0.5 PassengerDefaultRuby /usr/local/pkg/ruby/1.9.3-p448/bin/ruby Include conf.d/*.conf ... User apache Group apache ... DocumentRoot "/var/www/html" So just to clarify, the above httpd.conf file does NOT have a VirtualHost section. /etc/httpd/conf.d/ssl.conf (defines the VirtualHost for ssl): Listen 443 <VirtualHost _default_:443> SSLEngine on ... SSLCertificateFile /etc/pki/tls/certs/localhost.crt </VirtualHost> /etc/httpd/conf.d/twiki.conf (this works just fine --- note this does NOT define a VirtualHost): ScriptAlias /twiki/bin/ "/var/www/twiki/bin/" Alias /twiki/ "/var/www/twiki/" <Directory "/var/www/twiki/bin"> AllowOverride None Order Deny,Allow Deny from all AuthType Basic AuthName "our team" AuthBasicProvider ldap ...a lot of ldap and authorization stuff Options ExecCGI FollowSymLinks SetHandler cgi-script </Directory> /etc/httpd/conf.d/redmine.conf: Alias /redmine/ "/var/www/redmine/public/" <Directory "/var/www/redmine/public"> Options Indexes ExecCGI FollowSymLinks Order allow,deny Allow from all AllowOverride all </Directory> The amazing thing is that this doesn't completely NOT work: I can successfully open up https://someserver/redmine/ with SSL and the https://someserver/twiki/ site remains unaffected. This tells me that it IS possible to have two separate sites up with one SSL configuration, so I don't think that's the problem. The problem is is that it opens up to the file index. I can navigate around my Redmine file structure, but no code ever gets executed. For example, there is a file included with Redmine called dispatch.fcgi in the public folder. https://someserver/redmine/dispatch.fcgi opens, but just as plain text code in the browser. As I understand it, in the case of using Passenger, CGI and FastCGI stuff is irrelevant/unused.

    Read the article

  • Hosting a subversion working copy in an remote WebDAV folder

    - by Daniel Baulig
    This might be a bit awkward, but I'll try to explain what I am trying to achieve and what problems I encountered. First of all: whats this about? I am currently trying to set up a distributed working enviroment for developing a web page. My plan was to setup a SVN repository for version control, a live server where the actual live page ist hosted and a development server where I can work on the page. To ease things I intended to not have a local copy of the project on my disk, but to actually work directy on the files, that the development server hosts. For that I setup a WebDAV directory, under devserver.com/workspace, that actually mapped to files served under devserver.com/. So I could connect to devserver.com/workspace, change something and view the results live at devserver.com/. So far this worked perfectly. The next step was to create a SVN repository that would take care of my version control. I intended to be able to checkin to the reposiroty from my development server and at any time, with a small shell script, deploy any revision from the svn to the live server by checking out a copy of the revision into the live server directories. The second part, checking out into the live server, also worked perfectly. The first part though is where problems arose: My workstation is a Windows 7 machine. I connected to the WebDAV share using Windows built-in WebDAV support, which worked quite well. I can create, move, delete, edit, whatever files on my WebDAV share from my Windows machine perfectly. The next step was to checkout a working copy from the SVN (actually hosted at devserver.com/subversion/) into the WebDAV share. In the first try I used the Eclipse plugin subversive. The actual checkout worked fine and I can update and commit stuff to the repository, however, I cannot add any files to the ignore list. It always brings me an error. So I tried the same thing with a complete fresh repository using TortoiseSVN - and again it failed with the same errors. Here is what it says when trying to add files to svnignore: Some of selected resources were not added to ignore. svn: Cannot rename file '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props.66fd8936-2701-0010-bb76-472f0b56a5d1.tmp' to '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props' This is what apache2 tells me, when I try to add a file to svnignore: [Sun Mar 07 03:54:19 2010] [error] [client xxx.xxx.xxx.xxx] Negotiation: discovered file(s) matching request: /var/www/devserver.com/.svn/tmp/dir-props (None could be negotiated). [Sun Mar 07 03:54:31 2010] [error] [client xxx.xxx.xxx.xxx] (20)Not a directory: The URL contains extraneous path components. The resource could not be identified. [400, #0] Actually both messages are repeated several times. The first one occurs first and is repeated about 5 times and the second comes there after and is repeated propably more than 20 times. If I create a regular file, delete, rename or modify it none of those messages appear in my error.log While writing this question now I was able to add fils to svnignore using TortoiseSVN. However, after that, Eclipse would not let me commit anymore. The error that used to pop up when adding files to svnignore now also shows up while commiting. While searching the web I found some people having this same message appearing because they had files only different in upper- / lower-case naming. I checked my repository and did not find such files. I also read somewhere about people having troubles with WebDAV and file locking, because WebDAV's file locking capabilities seem to be very limited. At some stage I got errors telling me my repository was locked and thus the operations could not be completed. This error though did not appear anymore, since I setup a completely fresh repository and working copy. I would really appreciate any help anyone can provide me in fixing this problem! If there are any more questions feel free to ask. I know this is a somewhat unusual setup. Best regards, Daniel

    Read the article

  • Persistent static routes fail on MacOS 10.6.5 startup!

    - by verbalicious
    I'm unable to get static routes to persist a reboot on Mac OS 10.6.5. I've tried all of the methods prescribed in Google search results, and previous posts on this site. I've tried manually creating a launchd daemon, and used RouteSplit's launchd daemon to no avail. It's clear that the interface is not ready when these methods attempt to apply the route. This workstation in question is getting its IP from DHCP and probably hasn't gotten its DHCP lease when the command runs. We're able to apply the route by hand when logged in, but not through startup methods. Is there another way to apply this route by sneaking the command into something later, but before the login window appears to the user? Here is some relevant log info from system.log. You can see the "route: writing to routing socket: Network is unreachable" errors where my launchd script fires off. I've tried adding extra "sleep" and "ipconfig waitall" statements later in the script but this doesn't fly. Dec 15 19:30:41 localhost com.apple.launchd[1]: *** launchd[1] has started up. *** Dec 15 19:30:45 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-258.13 (Oct 8 2010 17:10:30) starting Dec 15 19:30:47 localhost configd[15]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50) Dec 15 19:30:47 localhost configd[15]: DHCP en1: INIT transmit failed Dec 15 19:30:47 localhost configd[15]: network configuration changed. Dec 15 19:30:47 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:30:47 Administrators-MacBook-Pro blued[16]: Apple Bluetooth daemon started Dec 15 19:30:52 Administrators-MacBook-Pro syslog[67]: routes.sh: Starting RouteSplit Dec 15 19:30:53 Administrators-MacBook-Pro com.apple.usbmuxd[41]: usbmuxd-207 built for iTunesTenOne on Oct 19 2010 at 13:50:35, running 64 bit Dec 15 19:30:54 Administrators-MacBook-Pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[50]: Login Window Application Started Dec 15 19:30:55 Administrators-MacBook-Pro bootlog[61]: BOOT_TIME: 1292459441 0 Dec 15 19:30:55 Administrators-MacBook-Pro syslog[86]: routes.sh: static route 192.168.0.0/23 192.168.2.2 Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: route: writing to routing socket: Network is unreachable Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: add net 192.168.0.0: gateway 192.168.2.2: Network is unreachable Dec 15 19:30:57 Administrators-MacBook-Pro org.apache.httpd[38]: httpd: Could not reliably determine the server's fully qualified domain name, using Administrators-MacBook-Pro.local for ServerName Dec 15 19:30:58 Administrators-MacBook-Pro loginwindow[50]: Login Window Started Security Agent Dec 15 19:30:58 Administrators-MacBook-Pro WindowServer[89]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:30:58 Administrators-MacBook-Pro com.apple.WindowServer[89]: Wed Dec 15 19:30:58 Administrators-MacBook-Pro.local WindowServer[89] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:31:18 Administrators-MacBook-Pro configd[15]: network configuration changed. Dec 15 19:31:19 administrators-macbook-pro configd[15]: setting hostname to "administrators-macbook-pro.local" Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[121]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000 Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known Dec 15 19:31:27 administrators-macbook-pro configd[15]: network configuration changed. Dec 15 19:31:27 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:31:27 Administrators-MacBook-Pro ntpd[37]: Cannot find existing interface for address 17.151.16.20 Dec 15 19:31:27 Administrators-MacBook-Pro ntpd_initres[125]: ntpd indicates no data available! Dec 15 19:31:31 Administrators-MacBook-Pro sshd[128]: USER_PROCESS: 133 ttys000 Dec 15 19:31:37 Administrators-MacBook-Pro sudo[138]: administrator : TTY=ttys000 ; PWD=/Users/administrator ; USER=root ; COMMAND=/usr/bin/less /var/log/system.log ``You can see the following line in /var/log/kernel.log that shows the en0 interface coming up: Dec 15 19:30:51 Administrators-MacBook-Pro kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,0f01,0de1,0300,c1e1,3800]

    Read the article

  • When searching in Outlook, encountered this error "Instant Search encountered a problem while trying

    - by Imagineer
    Sometime when searching for certain keyword, I get this error "Instant Search encountered a problem while trying to display search results. Modifying your query may resolve this problem." I have enabled Outlook logging to determine what is the error as suggested by someone in other forum. but I haven't had a clue how to decipher it. 2010.05.11 09:38:10 <<<< Logging Started (level is LTF_TRACE) >>>> 2010.05.11 09:38:10 HELPER::Initialize called 2010.05.11 09:38:10 Initializing: Finding a Transport 2010.05.11 09:38:10 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000 2010.05.11 09:38:10 MAPI XP Call: TransportLogon, hr = 0x8004011d 2010.05.11 09:38:10 MAPI XP Call: Shutdown, hr = 0x00000000 2010.05.11 09:38:10 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000 2010.05.11 09:38:10 MAPI Status: (-- -- ---/--- -- ---) 2010.05.11 09:38:10 MAPI XP Call: TransportLogon, hr = 0x00000000 2010.05.11 09:38:10 Initializing: Found a transport, Error code = 0x00000000 2010.05.11 09:38:10 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 4, cUids = 1 2010.05.11 09:38:10 MAPI XP Call: RegisterOptions, hr = 0x00000000, cOptions = 2 2010.05.11 09:38:10 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 09:38:10 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000 2010.05.11 09:38:10 HELPER::Initialize done, Error code = 0x00000000 2010.05.11 09:38:10 HELPER::GetCapabilities called, Error code = 0x00000000 2010.05.11 09:38:10 Microsoft Exchange: Synch operation started (flags = 00000031) 2010.05.11 09:38:10 Microsoft Exchange: StartImport(flags = 00000000, max msg = ffffffff): full items 2010.05.11 09:38:10 Microsoft Exchange: UploadItems: 0 messages to send 2010.05.11 09:38:11 Starting the Spooling Cycle 2010.05.11 09:38:11 MAPI Status: (IN fl ---/OUT -- ---) 2010.05.11 09:38:11 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c 2010.05.11 09:38:11 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 855 2010.05.11 09:38:11 Progress: Receiving message (message 1 out of 856, size unknown) 2010.05.11 09:38:11 Downloading one message 2010.05.11 09:38:11 Transport tightly coupled with store, download is NOOP 2010.05.11 09:38:11 Downloading done, Error code = 0x8004010f 2010.05.11 09:38:11 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 09:38:11 FINISHED MAPI TASK 2010.05.11 09:38:11 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 09:38:11 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 09:38:11 EXECUTING EndSession MAPI TASK 2010.05.11 09:38:11 Starting the Simplified Transfer Cycle 2010.05.11 09:38:11 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 855 2010.05.11 09:38:11 Progress: Receiving message (message 1 out of 856, size unknown) 2010.05.11 09:38:11 Downloading one message 2010.05.11 09:38:11 MAPI Status: (IN -- act/OUT -- ---) 2010.05.11 09:38:11 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 09:38:11 Downloading done, Error code = 0x8004010f 2010.05.11 09:38:11 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 09:38:11 FINISHED MAPI TASK 2010.05.11 09:38:11 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 09:38:11 Microsoft Exchange: Synch operation completed 2010.05.11 10:08:15 Microsoft Exchange: Synch operation started (flags = 00000031) 2010.05.11 10:08:15 Microsoft Exchange: StartImport(flags = 00000000, max msg = ffffffff): full items 2010.05.11 10:08:15 Microsoft Exchange: UploadItems: 0 messages to send 2010.05.11 10:08:16 Starting the Spooling Cycle 2010.05.11 10:08:16 MAPI Status: (IN fl ---/OUT -- ---) 2010.05.11 10:08:16 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c 2010.05.11 10:08:16 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 858 2010.05.11 10:08:16 Progress: Receiving message (message 1 out of 859, size unknown) 2010.05.11 10:08:16 Downloading one message 2010.05.11 10:08:16 Transport tightly coupled with store, download is NOOP 2010.05.11 10:08:16 Downloading done, Error code = 0x8004010f 2010.05.11 10:08:16 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 10:08:16 FINISHED MAPI TASK 2010.05.11 10:08:16 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 10:08:16 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 10:08:16 EXECUTING EndSession MAPI TASK 2010.05.11 10:08:16 Starting the Simplified Transfer Cycle 2010.05.11 10:08:16 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 858 2010.05.11 10:08:16 Progress: Receiving message (message 1 out of 859, size unknown) 2010.05.11 10:08:16 Downloading one message 2010.05.11 10:08:16 MAPI Status: (IN -- act/OUT -- ---) 2010.05.11 10:08:16 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 10:08:16 Downloading done, Error code = 0x8004010f 2010.05.11 10:08:16 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 10:08:16 FINISHED MAPI TASK 2010.05.11 10:08:16 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 10:08:16 Microsoft Exchange: Synch operation completed 2010.05.11 10:09:48 HELPER::Uninitialize called 2010.05.11 10:09:48 MAPI Status: (-- -- ---/--- -- ---) 2010.05.11 10:09:48 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000 2010.05.11 10:09:48 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000 2010.05.11 10:09:48 MAPI XP Call: Shutdown, hr = 0x00000000 2010.05.11 10:09:48 Resource manager terminated I'm running Outlook 2007 SP1 in Citrix environment and should be running in Cache Mode. In my Outlook Tools-Options-Search Option, there is nothing under indexing. Any help is greatly appreciated! Thank you.

    Read the article

  • How do you handle authentication across domains?

    - by William Ratcliff
    I'm trying to save users of our services from having to have multiple accounts/passwords. I'm in a large organization and there's one group that handles part of user authentication for users who are from outside the facility (primarily for administrative functions). They store a secure cookie to establish a session and communicate only via HTTPS via the browser. Sessions expire either through: 1) explicit logout of the user 2) Inactivity 3) Browser closes My team is trying to write a web application to help users analyze data that they've taken (or are currently taking) while at our facility. We need to determine if a user is 1) authenticated 2) Some identifier for that user so we can store state for them (what analysis they are working on, etc.) So, the problem is how do you authenticate across domains (the authentication server for the other application lives in a border region between public and private--we will live in the public region). We have come up with some scenarios and I'd like advice about what is best practice, or if there is one we haven't considered. Let's start with the case where the user is authenticated with the authentication server. 1) The authentication server leaves a public cookie in the browser with their primary key for a user. If this is deemed sensitive, they encrypt it on their server and we have the key to decrypt it on our server. When the user visits our site, we check for this public cookie. We extract the user_id and use a public api for the authentication server to request if the user is logged in. If they are, they send us a response with: response={ userid :we can then map this to our own user ids. If necessary, we can request additional information such as email-address/display name once (to notify them if long running jobs are done, or to share results with other people, like with google_docs). account_is_active:Make sure that the account is still valid session_is_active: Is their session still active? If we query this for a valid user, this will have a side effect that we will reset the last_time_session_activated value and thus prolong their session with the authentication server last_time_session_activated: let us know how much time they have left ip_address_session_started_from:make sure the person at our site is coming from the same ip as they started the session at } Given this response, we either accept them as authenticated and move on with our app, or redirect them to the login page for the authentication server (question: if we give an encrypted portion of the response (signed by us) with the page to redirect them to, do we open any gaping security holes in the authentication server)? The flaw that we've found with this is that if the user visits evilsite.com and they look at the session cookie and send a query to the public api of the authentication server, they can keep the session alive and if our original user leaves the machine without logging out, then the next user will be able to access their session (this was possible before, but having the session alive eternally makes this worse). 2) The authentication server redirects all requests made to our domain to us and we send responses back through them to the user. Essentially, they act as a proxy. The advantage of this is that we can handshake with the authentication server, so it's safe to be trusted with the email address/name of the user and they don't have to reenter it So, if the user tries to go to: authentication_site/mysite_page1 they are redirected to mysite. Which would you choose, or is there a better way? The goal is to minimize the "Yet Another Password/Yet another username" problem... Thanks!!!!

    Read the article

  • How do I achieve lossless JPEG joining without truncation of partial MCUs?

    - by Karan
    I am working on a project for which I need to join thousands of JPEG images losslessly (I'm not talking about the Lossless JPEG/JPEG 2000/JPEG-LS formats here). Aforementioned images have varying levels of chroma subsampling (1x1, 1x2, 2x1, 2x2), resulting in varying MCU sizes (8x8, 8x16, 16x8, 16x16 px). However, in any given set of images to be joined together, each image has identical characteristics. For now, let's assume I only have 2 images. Image #1 (I1) is 256x256px in size and #2 (I2) is 239x256px in size. 2x2 subsampling is used such that MCU size is 16x16px. I2 thus obviously has partial MCUs at the right edge, since its width is not evenly divisible by 16. (I've read that so-called 'partial' MCUs actually contain the data for a complete MCU, but the image dimensions instruct the renderer to only display the relevant pixels and ignore/hide the extra ones.) Looking around for tools that could help me accomplish this, I came across a modified version of JpegTran, that contains an experimental lossless crop 'n' drop (cut & paste) feature. All the other apps I encountered that support lossless JPEG editing seem to utilise IJG's (JpegTran) code, so this seemed to be the logical choice. Also, given the sheer number of images, I wanted something that could preferably be run from the command-line so that I could automate the process with a script. Unfortunately, while everything else worked fine, it seems JpegTran truncates the partial MCUs instead of retaining them. Thus in the example above, the final joined image contains all of I1, but only 224x256px of I2. Why 224? because 239 = 14x16+15, which means there are 14 full MCUs along the width, and 1 partial MCU (just 1px short of the complete 16px). The last 15px is what is getting blanked, leading to a 495x256px image with 15px of blank (grey) pixels at the right edge. See images below (shame that imgur re-compresses them): (left )+ (right) = As you can clearly see, the red portion (15px) of I2 has been truncated by JpegTran. If the MCUs were 8px in width, the lost portion would have been the right-most 7px of I2. Similarly, joining I3 (256x239px) *below * I1 would cause the loss of 7 or 15px, depending on the MCU height of course: (top) + (bottom) = If this is better suited to some other StackExchange (or even non-SE) site/forum where JPEG/image encoding experts hang out, do let me know. Can what I am attempting even be done, or is the so-called 'lossless' JPEG crop 'n' drop only valid for images with no partial MCUs? (Maybe that is why the feature is still in an "experimental state" more than a decade after being introduced...) Until I know for sure that it is impossible, I am not interested in suggestions for lossy joining. Avoiding any generational loss whatsoever is the sole reason why I'm breaking my head over this, else I'd have had this done and dusted ages ago. Also, I am not interested in suggestions related to switching image formats. I do not control the source of the images. If it can be done, how? Please keep in mind that any alternate apps suggested must ideally be capable of automation, given the requirements stated above. (But given how it's unlikely I'm even going to receive a useful answer given the constraints, I would be happy with any app suggestion just as long as it actually works. I can always look into an AutoIT/AHK script or something later to automate it.) I understand that an odd-sized final image might cause issues, so I am fully prepared to accept any solution, even if it results in blank (preferably black) padding pixels to the right/bottom. What I mean is, I don't care if I1 + I2 is 496x256px (1px padding) or even 512x256px (17px padding) in size, as long as the final image contains all the actual image data from both source images, and the entire process is lossless. Obviously the lesser the padding (if any), the better, but at this point any solution will do. A Windows-based solution would be perfect, but a Linux-based one would be entirely acceptable.

    Read the article

  • Why do we get a sudden spike in response times?

    - by Christian Hagelid
    We have an API that is implemented using ServiceStack which is hosted in IIS. While performing load testing of the API we discovered that the response times are good but that they deteriorate rapidly as soon as we hit about 3,500 concurrent users per server. We have two servers and when hitting them with 7,000 users the average response times sit below 500ms for all endpoints. The boxes are behind a load balancer so we get 3,500 concurrents per server. However as soon as we increase the number of total concurrent users we see a significant increase in response times. Increasing the concurrent users to 5,000 per server gives us an average response time per endpoint of around 7 seconds. The memory and CPU on the servers are quite low, both while the response times are good and when after they deteriorate. At peak with 10,000 concurrent users the CPU averages just below 50% and the RAM sits around 3-4 GB out of 16. This leaves us thinking that we are hitting some kind of limit somewhere. The below screenshot shows some key counters in perfmon during a load test with a total of 10,000 concurrent users. The highlighted counter is requests/second. To the right of the screenshot you can see the requests per second graph becoming really erratic. This is the main indicator for slow response times. As soon as we see this pattern we notice slow response times in the load test. How do we go about troubleshooting this performance issue? We are trying to identify if this is a coding issue or a configuration issue. Are there any settings in web.config or IIS that could explain this behaviour? The application pool is running .NET v4.0 and the IIS version is 7.5. The only change we have made from the default settings is to update the application pool Queue Length value from 1,000 to 5,000. We have also added the following config settings to the Aspnet.config file: <system.web> <applicationPool maxConcurrentRequestsPerCPU="5000" maxConcurrentThreadsPerCPU="0" requestQueueLimit="5000" /> </system.web> More details: The purpose of the API is to combine data from various external sources and return as JSON. It is currently using an InMemory cache implementation to cache individual external calls at the data layer. The first request to a resource will fetch all data required and any subsequent requests for the same resource will get results from the cache. We have a 'cache runner' that is implemented as a background process that updates the information in the cache at certain set intervals. We have added locking around the code that fetches data from the external resources. We have also implemented the services to fetch the data from the external sources in an asynchronous fashion so that the endpoint should only be as slow as the slowest external call (unless we have data in the cache of course). This is done using the System.Threading.Tasks.Task class. Could we be hitting a limitation in terms of number of threads available to the process?

    Read the article

  • collectd does not work

    - by bery
    I have installed collectd-5.0.0 on Fedora12 server and would like to run its service for receiving data from clients. I have enabled network plugin and rddtool plugin as commented: collectd.conf in server: BaseDir "/opt/collectd/var/lib/collectd" LoadPlugin "logfile" LoadPlugin network LoadPlugin rrdtool <Plugin network> Listen "192.168.8.37" "25826" </Plugin> collectd.conf in client: LoadPlugin logfile LoadPlugin cpu LoadPlugin network LoadPlugin memory <Plugin network> Server"192.168.8.37" "25826" </Plugin> collectd.log in server: [2011-08-03 02:36:04] Exiting normally. [2011-08-03 02:36:04] rrdtool plugin: Shutting down the queue thread. [2011-08-03 02:36:04] network plugin: Stopping receive thread. [2011-08-03 02:36:04] network plugin: Stopping dispatch thread. [2011-08-03 02:37:11] Initialization complete, entering read-loop. collectd.log in client: [2011-08-02 17:31:44] Initialization complete, entering read-loop. results thst execute netstat on server: netstat -ulpn | grep 25826 udp 0 0 192.168.8.37:25826 0.0.0.0:* 4744/collectd problem: but there is noting in "/opt/collectd/var/lib/collectd/" on ser yes,I move the port number of "25826" as your propose(But I think this is the default port for coolectd).there is no rdd files recived on server. collectd.log in client collectd [2011-08-03 10:01:36] plugin_read_thread: Handling memory'. [2011-08-03 10:01:36] plugin_read_thread: Handlingcpu'. [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = memory; plugin_instance = ; type = memory; type_instance = used; [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = cpu; plugin_instance = 0; type = cpu; type_instance = user; [2011-08-03 10:01:36] uc_update: uml/memory/memory-used: ds[0] = 280412160.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] uc_update: uml/cpu-0/cpu-user: ds[0] = 0.100008 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = memory; plugin_instance = ; type = memory; type_instance = buffered; [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = cpu; plugin_instance = 0; type = cpu; type_instance = nice; [2011-08-03 10:01:36] uc_update: uml/memory/memory-buffered: ds[0] = 344182784.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] uc_update: uml/cpu-0/cpu-nice: ds[0] = 0.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] network plugin: flush_buffer: send_buffer_fill = 1340 [2011-08-03 10:01:36] network plugin: network_send_buffer: buffer_len = 1340 ... [2011-08-03 10:01:36] plugin_read_thread: Next read of the cpu plugin at 1312380106.429064774. collectd.log in server collectd: [2011-08-03 20:18:08] type = network [2011-08-03 20:18:08] type = rrdtool [2011-08-03 20:18:08] network plugin: sockent_open: node = 192.168.8.37; service = 25826; [2011-08-03 20:18:08] fd = 3; calling bind' [2011-08-03 20:18:08] Done parsing/opt/collectd//share/collectd/types.db' [2011-08-03 20:18:08] interval_g = 10; [2011-08-03 20:18:08] timeout_g = 2; [2011-08-03 20:18:08] hostname_g = localhost.localdomain; [2011-08-03 20:18:08] Initialization complete, entering read-loop. It looks like, data is sending but doesn't be recived. Where is the mistake?

    Read the article

  • Ubuntu: Move fsbackup backups to Amazon S3

    - by Alexander Gladysh
    I have a legacy server (Ubuntu 9.10 Karmic x86), where previous admin set up backups with fsbackup. This server lives in a VPS (under some kind of Xen), and it is low on HDD space (16 GB total). Now it came to a point, where fsbackup backups take more space than the rest of data in the system. The filesystem is 100% filled, and I already cleaned up all that I could, aside from actual backups. I do not have any experience managing fsbackup, and I do not want to break or lose the backups. Googling fsbackup gives surprisingly low quality results... Here is how my backups look like: $ sudo ls -lh /var/archives total 8.1G -rw-rw---- 1 root root 318 2011-01-06 06:26 myserver-20110106.md5 -rw-rw---- 1 root root 258 2011-01-07 06:26 myserver-20110107.md5 -rw-rw---- 1 root root 318 2011-01-08 06:26 myserver-20110108.md5 -rw-rw---- 1 root root 318 2011-01-09 06:26 myserver-20110109.md5 -rw-rw---- 1 root root 346 2011-01-10 06:43 myserver-20110110.md5 -rw-rw---- 1 root root 14M 2011-01-06 06:26 myserver-all-mysql-databases.20110106.sql.bz2 -rw-rw---- 1 root root 14M 2011-01-07 06:26 myserver-all-mysql-databases.20110107.sql.bz2 -rw-rw---- 1 root root 14M 2011-01-08 06:26 myserver-all-mysql-databases.20110108.sql.bz2 -rw-rw---- 1 root root 14M 2011-01-09 06:26 myserver-all-mysql-databases.20110109.sql.bz2 -rw-rw---- 1 root root 862 2011-01-10 06:43 myserver-all-mysql-databases.20110110.sql.bz2 -rw-rw---- 1 root root 827K 2011-01-03 06:25 myserver-etc.20110103.master.tar.gz -rw-rw---- 1 root root 16K 2011-01-06 06:25 myserver-etc.20110106.tar.gz -rw-rw---- 1 root root 16K 2011-01-07 06:25 myserver-etc.20110107.tar.gz -rw-rw---- 1 root root 16K 2011-01-08 06:25 myserver-etc.20110108.tar.gz -rw-rw---- 1 root root 16K 2011-01-09 06:25 myserver-etc.20110109.tar.gz -rw-rw---- 1 root root 827K 2011-01-10 06:25 myserver-etc.20110110.master.tar.gz -rw------- 1 root root 36K 2011-01-10 06:25 myserver-etc.incremental.bin -rw-rw---- 1 root root 29M 2011-01-03 06:25 myserver-home.20110103.master.tar.gz -rw-rw---- 1 root root 11K 2011-01-06 06:25 myserver-home.20110106.tar.gz -rw-rw---- 1 root root 14K 2011-01-07 06:25 myserver-home.20110107.tar.gz -rw-rw---- 1 root root 11K 2011-01-08 06:25 myserver-home.20110108.tar.gz -rw-rw---- 1 root root 11K 2011-01-09 06:25 myserver-home.20110109.tar.gz -rw-rw---- 1 root root 2.0M 2011-01-10 06:25 myserver-home.20110110.master.tar.gz -rw------- 1 root root 27K 2011-01-10 06:25 myserver-home.incremental.bin -rw-rw---- 1 root root 1.5G 2011-01-03 06:29 myserver-opt.20110103.master.tar.gz -rw-rw---- 1 root root 1.5M 2011-01-06 06:25 myserver-opt.20110106.tar.gz -rw-rw---- 1 root root 1.5M 2011-01-07 06:25 myserver-opt.20110107.tar.gz -rw-rw---- 1 root root 1.5M 2011-01-08 06:25 myserver-opt.20110108.tar.gz -rw-rw---- 1 root root 1.5M 2011-01-09 06:25 myserver-opt.20110109.tar.gz -rw-rw---- 1 root root 1.5G 2011-01-10 06:30 myserver-opt.20110110.master.tar.gz -rw------- 1 root root 201K 2011-01-10 06:30 myserver-opt.incremental.bin -rw-rw---- 1 root root 2.3G 2011-01-03 06:41 myserver-srv.20110103.master.tar.gz -rw-rw---- 1 root root 44M 2011-01-06 06:26 myserver-srv.20110106.tar.gz -rw-rw---- 1 root root 27M 2011-01-07 06:25 myserver-srv.20110107.tar.gz -rw-rw---- 1 root root 39M 2011-01-08 06:26 myserver-srv.20110108.tar.gz -rw-rw---- 1 root root 2.0M 2011-01-09 06:25 myserver-srv.20110109.tar.gz -rw-rw---- 1 root root 2.7G 2011-01-10 06:42 myserver-srv.20110110.master.tar.gz -rw------- 1 root root 3.4M 2011-01-10 06:42 myserver-srv.incremental.bin I'm thinking about moving backups to Amazon S3, but before that I have to free some space, so the server can work. Perhaps I can mount /var/archives to an Amazon S3 bucket somehow... Any advice?

    Read the article

  • apache+mod_wsgi configuration for django project(s) on a quad core

    - by Stefano
    I've been experiment quite some time with a "typical" django setting upon nginx+apache2+mod_wsgi+memcached(+postgresql) (reading the doc and some questions on SO and SF, see comments) Since I'm still unsatisfied with the behavior (definitely because of some bad misconfiguration on my part) I would like to know what a good configuration would look like with these hypotesis: Quad-Core Xeon 2.8GHz 8 gigs memory several django projects (anything special related to this?) These are excerpts form my current confs: apache2 SetEnv VHOST null #WSGIPythonOptimize 2 <VirtualHost *:8082> ServerName subdomain.domain.com ServerAlias www.domain.com SetEnv VHOST subdomain.domain AddDefaultCharset UTF-8 ServerSignature Off LogFormat "%{X-Real-IP}i %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\"" custom ErrorLog /home/project1/var/logs/apache_error.log CustomLog /home/project1/var/logs/apache_access.log custom AllowEncodedSlashes On WSGIDaemonProcess subdomain.domain user=www-data group=www-data threads=25 WSGIScriptAlias / /home/project1/project/wsgi.py WSGIProcessGroup %{ENV:VHOST} </VirtualHost> wsgi.py import os import sys # setting all the right paths.... _realpath = os.path.realpath(os.path.dirname(__file__)) _public_html = os.path.normpath(os.path.join(_realpath, '../')) sys.path.append(_realpath) sys.path.append(os.path.normpath(os.path.join(_realpath, 'apps'))) sys.path.append(os.path.normpath(_public_html)) sys.path.append(os.path.normpath(os.path.join(_public_html, 'libs'))) sys.path.append(os.path.normpath(os.path.join(_public_html, 'django'))) os.environ['DJANGO_SETTINGS_MODULE'] = 'settings' import django.core.handlers.wsgi _application = django.core.handlers.wsgi.WSGIHandler() def application(environ, start_response): """ Launches django passing over some environment (domain name) settings """ application_group = environ['mod_wsgi.application_group'] """ wsgi application group is required. It's also used to generate the HOST.DOMAIN.TLD:PORT parameters to pass over """ assert application_group fields = application_group.replace('|', '').split(':') server_name = fields[0] os.environ['WSGI_APPLICATION_GROUP'] = application_group os.environ['WSGI_SERVER_NAME'] = server_name if len(fields) > 1 : os.environ['WSGI_PORT'] = fields[1] splitted = server_name.rsplit('.', 2) assert splitted >= 2 splited.reverse() if len(splitted) > 0 : os.environ['WSGI_TLD'] = splitted[0] if len(splitted) > 1 : os.environ['WSGI_DOMAIN'] = splitted[1] if len(splitted) > 2 : os.environ['WSGI_HOST'] = splitted[2] return _application(environ, start_response)` folder structure in case it matters (slightly shortened actually) /home/www-data/projectN/var/logs /project (contains manage.py, wsgi.py, settings.py) /project/apps (all the project ups are here) /django /libs Please forgive me in advance if I overlooked something obvious. My main question is about the apache2 wsgi settings. Are those fine? Is 25 threads an /ok/ number with a quad core for one only django project? Is it still ok with several django projects on different virtual hosts? Should I specify 'process'? Any other directive which I should add? Is there anything really bad in the wsgi.py file? I've been reading about potential issues with the standard wsgi.py file, should I switch to that? Or.. should this conf just be running fine, and I should look for issues somewhere else? So, what do I mean by "unsatisfied": well, I often get quite high CPU WAIT; but what is worse, is that relatively often apache2 gets stuck. It just does not answer anymore, and has to be restarted. I have setup a monit to take care of that, but it ain't a real solution. I have been wondering if it's an issue with the database access (postgresql) under heavy load, but even if it was, why would the apache2 processes get stuck? Beside these two issues, performance is overall great. I even tried New Relic and got very good average results.

    Read the article

  • Cannot join Win7 workstations to Win2k8 domain

    - by wfaulk
    I am trying to connect a Windows 7 Ultimate machine to a Windows 2k8 domain and it's not working. I get this error: Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt. DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "example.local": The query was for the SRV record for _ldap._tcp.dc._msdcs.example.local The following domain controllers were identified by the query: dc1.example.local dc2.example.local However no domain controllers could be contacted. Common causes of this error include: Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. The client is in an office connected remotely via MPLS to the data center where our domain controllers exist. I don't seem to have anything blocking connectivity to the DCs, but I don't have total control over the MPLS circuit, so it's possible that there's something blocking connectivity. I have tried multiple clients (Win7 Ultimate and WinXP SP3) in the one office and get the same symptoms on all of them. I have no trouble connecting to either of the domain controllers, though I have, admittedly, not tried every possible port. ICMP, LDAP, DNS, and SMB connections all work fine. Client DNS is pointing to the DCs, and "example.local" resolves to the two IP addresses of the DCs. I get this output from the NetLogon Test command line utility: C:\Windows\System32>nltest /dsgetdc:example.local Getting DC name failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN I have also created a separate network to emulate that office's configuration that's connected to the DC network via LAN-to-LAN VPN instead of MPLS. Joining Windows 7 computers from that remote network works fine. The only difference I can find between the two environments is the intermediate connectivity, but I'm out of ideas as to what to test or how to do it. What further steps should I take? (Note that this isn't actually my client workstation and I have no direct access to it; I'm forced to do remote hands access to it, which makes some of the obvious troubleshooting methods, like packet sniffing, more difficult. If I could just set up a system there that I could remote into, I would, but requests to that effect have gone unanswered.) 2011-08-25 update: I had DCDIAG.EXE run on a client attempting to join the domain: C:\Windows\System32>dcdiag /u:example\adminuser /p:********* /s:dc2.example.local Directory Server Diagnosis Performing initial setup: Ldap search capabality attribute search failed on server dc2.example.local, return value = 81 This sounds like it was able to connect via LDAP, but the thing that it was trying to do failed. But I don't quite follow what it was trying to do, much less how to reproduce it or resolve it. 2011-08-26 update: Using LDP.EXE to try and make an LDAP connection directly to the DCs results in these errors: ld = ldap_open("10.0.0.1", 389); Error <0x51: Fail to connect to 10.0.0.1. ld = ldap_open("10.0.0.2", 389); Error <0x51: Fail to connect to 10.0.0.2. ld = ldap_open("10.0.0.1", 3268); Error <0x51: Fail to connect to 10.0.0.1. ld = ldap_open("10.0.0.2", 3268); Error <0x51: Fail to connect to 10.0.0.2. This would seem to point fingers at LDAP connections being blocked somewhere. (And 0x51 == 81, which was the error from DCDIAG.EXE from yesterday's update.) I could swear I tested this using TELNET.EXE weeks ago, but now I'm thinking that I may have assumed that its clearing of the screen was telling me that it was waiting and not that it had connected. I'm tracking down LDAP connectivity problems now. This update may become an answer.

    Read the article

  • Why do GPUs overheat?

    - by JAD
    About a year ago, I added a 9800GT (1 GB version) and a Corsair CX500 PSU to an HP M8000N computer. A few weeks ago, the HDD overheated and I decided to transfer the GPU & PSU to a new build, which consists of: i3 @ 3.3Ghz Gigabyte H61 Micro ATX Mobo 4GB RAM 500GB WD HDD DVD RW Drive Cooler Master Elite 430 Tower Once I had Win7 up and running, I installed all the essential drivers that came with the Gigabyte Mobo CD. However, whenever I tried installing the Graphics Media Accelerator driver, the computer would crash and enter an endless boot sequence on the next startup. I skipped installing this driver and installed the CD driver for the 9800GT, which by now is a year old. Everything was working fine, WEI rated my GPU at 6.6 graphics & aero performance. However, after updating my Nvidia drivers to the latest, the WEI dropped my rating to 3.3 for Aero, and 4.7 for graphics performance. Just to make sure that everything was ok, I ran Bad Company 2 on medium settings. The first few minutes ran just fine at a smooth framerate, so I dismissed this as Windows being Windows. About 6 hours later, I ran BC2 again. This time I averaged anywhere from 2-5 FPS. I checked the GPU temperature through GPU-Z, and it came back as 120C. The problem with this, is that the computer was on for six hours up to that point. Wouldn't the card have experienced a reactor core meltdown a lot sooner than that? Granted, the computer was "sleeping" some of the time, but still... The next day I took out a temperature gun and ran some tests. I would point the laser at a very specific area on the reverse side of the card (not the fan or "front"), and compare the temp reading with GPU-Z. After leaving the system on idle on idle for a few minutes, I ran BC2 twice. Here are the results: GPU-Z Reading / Temp Gun Reading / Time Null / 22.3°C / Comp is Off 53°C / 33.5°C / 1:49 78°C / 46°C / 1:53 - (First BC2 run; good framerate) 102°C / 64.6°C / 2:01 - (System is again on idle) 113°C / 64.8°C / 2:10 119°C / 71.8°C / 2:17 - (Second BC2 run; poor framerate) I should also mention that I also took a temp recording of another part of the GPU from 2:01-2:17. The temp in this area jumped from 75°C to 82.9°C in that time frame. This pretty much confirms that GPU-Z is reporting the temperature accurately, and the card is overheating. But I'd like to know why; the cars is doing nothing and still the temperature climbs at a steady rate. I thoroughly cleaned the GPU and PSU when I salvaged them from the old HP M8000N computer with a can of compressed air, dust cant be the issue. Similarly, the rest of the computer is brand new. I installed various Nvidia drivers, but no luck. It seems strange to me that a year-old card is suddenly failing on me; aren't they supposed to last at least two years? Could this be a driver issue? Is the motherboard faulty? Could the PSU be overfeeding the card on voltage? Neither case seems likely, as the CPU, RAM and otherwise the rest of the comp has worked flawlessly and has stayed well within respectable temp ranges (the i3 lingers around 50C, the HDD stays at 30C, so does the PSU). How can I pinpoint the issue?

    Read the article

< Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >