Search Results

Search found 64551 results on 2583 pages for 'at work'.

Page 52/2583 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• Control copy/paste doesn't work

  - by Guest

  I have a laptop HP PAVILION dv6-3126er with Windows 7 Home Edition installed and neither control copy nor control paste doesn't work (i've tried: ctrl+c, ctrl+v, shift+c, shift+v, ctrl + insert, shift + insert). I've tried to run a system check through cmd with sfc /scannow, it repaired something, i restarted but it didn't solve the problem. I've also tried many key combinations (like alt+ctrl+fn), but nothing works in any program. In Microsoft Word 2003 in the menu i have no key combination for copy/paste near them (in my previous comp they've been there - in brackets). Shift+Delete works by the way. I brought this laptop a few weeks ago, and i discovered this problem in the first days. I have no viruses because i have had no time to even connect him to internet. Anyways, i checked it for viruses - it is clean. I don't want to do system restore, because i see no reason to do it for a pretty clean system. I hope it is not a problem with the laptop itself. Maybe there is another reason? Maybe i need to do some more system checks? Any suggestions? Thanks in advance.

  Read the article

• Wireless does not work on Ubuntu 9.04

  - by Yongwei Xing

  Hi all I install the Ubuntu 9.04 my old Lenovo Y520 laptop, the wirless does not work.My Wireless card is Intel Pro/wireless 2100 card. But I can not enable it. My wired card is working well. Does anyone meet it before. the ifconfig output is eth0 Link encap:Ethernet HWaddr 00:0a:e4:5f:6c:30 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:973 errors:0 dropped:0 overruns:0 frame:0 TX packets:1025 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:574701 (574.7 KB) TX bytes:169249 (169.2 KB) Interrupt:10 eth1 Link encap:Ethernet HWaddr 00:0c:f1:58:79:b5 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:10 Base address:0x8000 Memory:d0202000-d0202fff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) the output of iwconfig is eth1 unassociated ESSID:off/any Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:off Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I have another question. When my OS is 9.04, there is a icon about network connection on the panel at the top. After I upgraded to 9.10, that icon disappeared. How can I get that back? Best Regareds,

  Read the article

• Making "default saved" work with GRUB2...?

  - by baltusaj

  I just installed Moblin Operating System. It's using GRUB2. On my Ubuntu 8.04 GRUB 0.97 was being used in which i was using the default saved option comfortably. I found that with GRUB2 i should not edit /boot/grub/menu.lst directly but I did :) because my Moblin does not contain any /etc/default/grub where they say I should do the modification I want. So what I did is as following which did not work: default=saved timeout=1 #splashimage=(hd0,0)/boot/grub/splash.xpm.gz #hiddenmenu #silent title Moblin (2.6.31.5-10.1.moblin2-netbook) root (hd0,0) kernel /boot/vmlinuz-2.6.31.5-10.1.moblin2-netbook ro root=/dev/sda1 vga=current savedefault=1 title Pathetic Windows rootnoverify (hd0,1) chainloader +1 savedefault=0 By doing so I should have automatically switch between Moblin and Window at each boot but it's not working. Almost all the troubleshooters on internet are saying that I should enable the DEFAULT=save option in /etc/default/grub but I am unable to find this file. Any idea what else should I do? Thanks a lot Update: I used the equal to sign because by default my menu.lst had an entry as default=0. However, default 0, is also working fine. Moreover the menu.lst, i have is actually a symbolic link to ./grub.conf. I have also noticed that grub-intall and grub-set-default commands are not working.

  Read the article

• External SATA drive does not work without the optional USB cable *also* connected

  - by Software Monkey

  I have Vantec NST-260SU external eSATA/USB drive enclosure (which came with an optional separate power supply) connected to a relatively new Windows 7 computer. The drive should work as a SATA drive with either the separate power supply or using a USB cable solely for power. I would prefer to use the external power supply because I have used all my rear USB ports. Now, if I connect both the eSATA and USB cable, then: The drive shows in the BIOS list of AHCI drives (and not in the list of attached USB devices). Everything I can see about it in Computer Management seems to show it as a SATA driver (for example, it shows as "Location 0 (Channel 5, Target 0, Lun 0)" like my other SATA drives (and not "on USB Mass Storage Device" like my USB flash-drives). It seems very fast, very much faster than my USB flash drives. However, if I disconnect the USB cable and attach the power adapter instead, the drive does not show in the BIOS list and cannot be seen by Windows. The power LED on the enclosure is lit, and the drive enclosure becomes warm after running for a bit, so I am sure it is receiving power. Does anyone know if this device requires both the USB and eSATA cable, and if so, why? Or is there possibly something I need to do to reset the enclosure to not need the USB - the install instructions are pretty clear that you must connect the SATA cable before connecting the USB cable in order for the drive to function as SATA, which I am sure I did. PS: I have reviewed the small manual which came with it, which has not been of help.

  Read the article

• Unable to get ejabberd prebind to work

  - by cdecker

  I'm trying to get the prebind of BOSH sessions to work. I want to be able to authenticate a user in my CMS and then log him in when he accesses the chat, for this I found https://github.com/smokeclouds/http_prebind, it all works find and I was able to compile it with the following steps: rake configure sed -i 's/AUTH_USER/a_user/g' src/http_prebind.erl sed -i 's/AUTH_PASSWORD/a_password/g' src/http_prebind.erl sed -i 's/EJABBERD_DOMAIN/jabber.my.tld/g' src/http_prebind.erl rake build rake install And then adding the http request bindings to the configuration: {5280, ejabberd_http, [ {request_handlers, [ {["http-prebind"], http_prebind} ]}, %%captcha, http_bind, http_poll, http_prebind, web_admin ]} ]}. As far as I understand it I should now be able to simply request a new session like this: curl -u a_user:a_password http://jabber.my.tld:5280/http-prebind/some_user But no matter what I always get Unauthorized as response. Any idea about this one? PS: I also tried Mod-Http-Pre-Bind, but as it does not require a password I would prefer to use http_prebind. PPS: Does the user with username AUTH_USER and password AUTH_PASSWORD actually have to exist? I'm currently using an admin account.

  Read the article

• Enabled Network Discovery on Server, and now VNC and Squeezebox clients don't work

  - by Mike Hanson

  I've recently setup a Windows Server 2008. It's running an email server, Squeezebox server, MS SQL Server, etc. I'm doing remote maintenance with UltraVNC. I had everything working fine. Then the server needed to access a network share on another machine, and I was prompted to turn on network discovery, which I did. I chose the Home rather than Public option. Since doing that, some things have stopped working, while others are still fine. Shared folders and the the Email services (ports 25 and 110) are still accessible. VNC (port 5900) and Squeezeboxes (port 9000) no longer work. Here's what I've tried to try to solve the problem: Checked the network discovery settings, to see if anything looked strange. Checked the firewall settings, and those ports appear to be open. Also in the firewall settings, the entries for Private domain Network Discovery were all on, but the Domain/Public ones were off. I tried turning those on. In the services, turned on Function Discovery Resource Publication and SSDP Discovery. Any other suggestions?

  Read the article

• Remote paging with Nagios when network is down and email won't work -- cellular modems and alternatives

  - by Quinten

  What is the best option for remote paging when network services are down? I'm looking for a solution that can let me know when network services are down during off-hours only, and especially when email/smtp services are out. Therefore, it needs to be redundant to our network and power supply. I'm imagining a cellular modem is one option. What's the price range for these? Is anybody using them and feel that they are worth the cost? I'm imagining that it's something we would end up sending an emergency page ~ 1x/month at most, so I'd like the pricing to reflect that--I don't mind a high per-page cost as long as it has a low recurring cost. Another option would be to expose at least one server to remote ping, and run a check script on a remote server. Are there paid options for this? Currently, we run Nagios on a Linux VM on a Windows 2008 Hyper-V host. It would be great if the solution would work in that environment, but I know it's tricky with external devices, and we could move Nagios to a standalone workstation if needed.

  Read the article

• How to make the ec2 ami work on the Xen on Debian

  - by user67103

  Hi. Here is the scenario. We are creating a cloud App. We have a Debian on which we create a customized image and upload it to the Amazon EC2. After uploading it to the cloud we have made some more customizations and are trying to rebundle it. We are facing some issues in rebundling it. We would like to know if we could do something like this. a. Create an AMI Image on Debian b. Load it on to the Xen Hypervisor which would be over the Debian c. Customize the image d. Save the customized image e. Upload it to EC2. The issue is that I am unable to find a proper solution on how to install Xen on Debian and will the AMI on Xen work on EC2. Any suggestions/Help would be greatly appreciated. thanks. Krishna

  Read the article

• CentOS 5 VPN Server won't work

  - by Miro Markarian

  I have a CentOS 5 server configured to be both a L2TP server and a PPTP server + a radius server for hosting the AAA. My problem is that, the L2TP works great and I can connect to it, but can't connect to PPTP and every-time it ends up with error #619 when it gets to the verifying username and password section. Here is the log I got from /var/log/messages Dec 17 07:40:02 serverdl pptpd[8570]: CTRL: Client 5.52.247.62 control connection started Dec 17 07:40:03 serverdl pptpd[8570]: CTRL: Starting call (launching pppd, opening GRE) Dec 17 07:40:03 serverdl pppd[8571]: Plugin radius.so loaded. Dec 17 07:40:03 serverdl pppd[8571]: RADIUS plugin initialized. Dec 17 07:40:03 serverdl pppd[8571]: Plugin radattr.so loaded. Dec 17 07:40:03 serverdl pppd[8571]: RADATTR plugin initialized. Dec 17 07:40:03 serverdl pppd[8571]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 17 07:40:03 serverdl pppd[8571]: pptpd-logwtmp: $Version$ Dec 17 07:40:03 serverdl pppd[8571]: pppd 2.4.4 started by root, uid 0 Dec 17 07:40:03 serverdl pppd[8571]: Using interface ppp0 Dec 17 07:40:03 serverdl pppd[8571]: Connect: ppp0 <--> /dev/pts/2 Dec 17 07:40:03 serverdl pptpd[8570]: GRE: read(fd=7,buffer=80515e0,len=8260) from network failed: status = -1 error = Protocol not available Dec 17 07:40:03 serverdl pptpd[8570]: CTRL: GRE read or PTY write failed (gre,pty)=(7,6) Dec 17 07:40:03 serverdl pppd[8571]: Modem hangup Dec 17 07:40:03 serverdl pppd[8571]: Connection terminated. Dec 17 07:40:03 serverdl pppd[8571]: Exit. Dec 17 07:40:03 serverdl pptpd[8570]: CTRL: Client 5.52.247.62 control connection finished Just yesterday when I hadn't set up the L2TP yet PPTP was working great but then I uninstalled it and removed all it's config from /etc/* and installed L2TP first and then installed PPTP after it. and then it stopped to work. I believe it must be a radiusclient issue because both of the PPTP and L2TP services use radius to authenticate. And another thing I think must be the issue is that when assigning IPs to the PPP interfaces, I have done the following config. Is that right? For L2TP: localip 10.10.10.1 remoteip 10.10.10.2-254 For PPTP: localip 10.10.9.1 remoteip 10.10.9.2-254

  Read the article

• Cloned Win7: Keyboard doesn't work

  - by Marc

  I cloned my old Windows7 hard disk to a shiny new Seagate Momentus XT 500GB using the free EaseUs Disk Copy tool on my laptop. After the clone process I used the Windows 7 installation disc to start the automatic startup repair. This took maybe 15 minutes and then my cloned disk was able to start. Now the cloned disk boots until the login screen and then I can't do anything because my keyboard just doesn't work. I tried connecting an external USB keyboard but this didn't help. The mouse is working fine. Note that the keyboard works fine in BIOS and in the Windows startup options menu. I booted into safe mode and again the keyboard is not working at all. I also noticed that the letters "Press CTRL+ALT+Delete to login" are now shown in italic font but they used to be shown non-italic on the original disk. I have now replaced the clone with the original disk again and from here everything works fine. Doesn't anybody have an idea how I can get my keyboard back?

  Read the article

• Can't get DNS Alias work on Ubuntu 10.04 with Apache 2

  - by Johnny

  I want to use the DNS Alias to configure one of my domain pointing to a specific directory on the server. Here is what I've done: Change the IP address in domain setting, and it works $ ping www.example.com PING example.com (124.205.62.xxx): 56 data bytes 64 bytes from 124.205.62.xxx: icmp_seq=0 ttl=48 time=53.088 ms 64 bytes from 124.205.62.xxx: icmp_seq=1 ttl=48 time=52.125 ms ^C --- example.com ping statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 52.125/52.606/53.088/0.482 ms Add sites-available and sites-enabled $ ls -l /etc/apache2/sites-available/ total 16 -rw-r--r-- 1 root root 948 2010-04-14 03:27 default -rw-r--r-- 1 root root 7467 2010-04-14 03:27 default-ssl -rw-r--r-- 1 root root 365 2010-06-09 18:27 example.com $ ls -l /etc/apache2/sites-enabled/ total 0 lrwxrwxrwx 1 root root 26 2010-06-09 15:46 000-default -> ../sites-available/default lrwxrwxrwx 1 root root 33 2010-06-09 18:17 001-example.com -> ../sites-available/example.com But it doesn't work and when I open the browser for www.example.com, it shows an 111 error: The following error was encountered: Connection to 124.205.62.48 Failed The system returned: (111) Connection refused Here is how example.com's config: $ cat /etc/apache2/sites-enabled/001-example.com <virtualhost *:80> DocumentRoot "/vhosts/example.com/htdocs/" ServerName www.example.com ServerAlias example.com <Location /> Order Deny,Allow Deny from None Allow from all </Location> #Include /etc/phpmyadmin/apache.conf ErrorLog /vhosts/example.com/logs/error.log CustomLog /vhosts/example.com/logs/access.log combined Could you please tell me how to solve this?

  Read the article

• Internet connection problem,ping ok , but outlook and browsers dont work

  - by Ashian

  Hi, From some days ago I have a big problem on my laptop( run windows xp sp3) When I connect to internet I can ping web sites but when try to browse them some times it work correctly and some times the connection to server intrupted and I have to refresh the page several times. in this case browser show a connection problem immediatly after I click on address bar or a link on page( wihtout any try to connect to server) I use FireFox and opera and both of them have this problem. try another ISP and still I have this problem. I didnt use any proxy server and check the proxy setting. In this case Outlook also can't connect to mail server. this problem anfter some time or after restart windows have been fixed for a while. I check for virus and can't find anything. Is there any idea how can I fix it? UPDATE: Thanks for your responses. I test them , also I use Open DNS setting and that dosent help me. last night I see that my local web application ( such as Adsl modem config web site , and sites that I set up on windows xo IIS ) aslo can't open and Internal Communication error apears ( Opera Message) that didnt relate to DNS settings or Internet connection.

  Read the article

• SVG doesn't work on subdomain - some browsers try to download rather than display

  - by John Catterfeld

  I have a site with a 'development' subdomain, which displays my SVG file exactly as intended. However when I copy it across to www, or any other subdomain (e.g. 'test') some browsers try to open the file in an external editor, therefore asking me to download the file rather than displaying it. For example: http://development.mysite.com/test.svg - works http://www.mysite.com/test.svg - doesn't work The SVG file: <?xml version="1.0" standalone="no"?> <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd"> <svg xmlns="http://www.w3.org/2000/svg" version="1.1"> <circle cx="100" cy="50" r="40" stroke="black" stroke-width="2" fill="red" /> </svg> This happens in Firefox, Chrome and Safari, however IE9 and above display the file as intended. It is a Windows hosting, and I have <mimeMap fileExtension=".svg" mimeType="image/svg+xml" /> in my web.config file My hunch is that there must be some setting on the server which I need my hosting company to make. Can anyone suggest what might cause this issue?

  Read the article

• How does Subnetting Work?

  - by Kyle Brandt

  How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Server Fault gets lots of subnetting homework questions, so we could use an answer to point them to on Server Fault itself. What is classless routing and why is class-based routing obsolete? If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? What is NAT (Network Address Translation). Not looking for links to other sites (unless maybe you have one post with a bunch of good ones). I already know how to subnet, I just thought it would be nice if Server Fault had a generic subnetting answer.

  Read the article

• Changing the Start Menu Power Button - Setting does not work: only (Shut down) is available

  - by Martin

  This is the second time I try to change this setting on a Vista based OS and I can't get it to work again. OS: Windows Server 2002 SP2 (not R2) = Microsoft Windows [Version 6.0.6002] = Vista When I go to: Power Options - Change Plan Settings - Change advanced power settings - Power buttons and lid - Start menu power button - Setting: the available combo box will only show the option Shut down. No other options are available. This server is part of a domain and has not been set up by me. I have not yet talked with the domain admin, but as far as I could tell from googling, only Win7 has group policy options for the start menu. (And yes, OC I will talk to the domain admin to see if he has any clue - which I doubt.) (Edit: I have now talked to our domain admin, and he's got no clue either.) I'm responsible for this server and a local administrator but not a domain administrator. I switched off User Account Control (UAC) yesterday without problems. Since I always log into this machine via RDP and this being a server, the natural choice would be the option (Log out) and not (Shut down). What can I do to fix it or to find out why it cannot be changed? Thanks!

  Read the article

• External Dell Display doesn't work with MacBook Pro (2011) after Thunderbolt Firmware Update (1.0 and 1.2)

  - by tom

  Today two Thunderbolt Firmware Updates (1.0 and 1.2) became available for my MacBook Pro (Early 2011). After installing both, my external monitor, a Dell U2713HM, does no longer work. The system detects the display, but the display shows only black. An Apple Thunderbolt display works fine and a MacBook Air can use the Dell monitor without problems. My MacBook Pro can use the Dell monitor just fine when I boot from a USB stick. Therefore, clearly the Thunderbolt Firmware Update seems to be the problem. Does anyone have the same problem? Any solutions or workarounds? I guess there is no way to remove a Thunderbolt Firmware Update once it's installed, right? Update 24.10.2013: Is there no one else with this problem? In the meantime I tried three different cables – none worked. My colleague with the same generation MacBook Pro also can't use my display after installing the firmware update. All colleagues with MacBook Airs and newer MacBook Pros (all didn't receive the firmware update) can use the display. Update 29.10.2013: Wow, ok today my new MacBook Pro Retina 13' (Late 2013) arrived. Guess what, I cannot use the display with it. Only HDMI works – not with the full resolution.

  Read the article

• W7-pro indexing mydoc on disk partition does not work

  - by Yvan Thery

  I am working on a HP-7100 mini tower running W7 Pro 64bits. My Local HD includes C:/ + 2 disk partitions : all my documents are located on disk partition L:/ and all my media files are on disk partition M:/ The indexing process works well on C:/ and M:/ but does not index the L:/ any more also all of them are allowed to be indexed, also the system is present on all drive security tabs. I have tested to rebuilt the indexing file with a new setting including few directories present on drive C/M/L but still with L: does not work ! One more thing I can tell you is that even after rebuilding the indexing file, I can find some residual directories or files which are out of the test selection. It is like unerased components remaining in the indexing database. As I do not know precisely how the indexing process works it is hard to know what to do ... Recently I had a bad time after using a past restoration procedure ... maybe it did corrupt the indexing file ???? If I start indexing the all L:/ disk partition the system stop at 39 found index also many more are existing .... Does any one from you guys could advise the process to create a new indexing database ... ? Any idea to get out of this mess ? Many thanks for assistance Yvan

  Read the article

• Microphone doesn't work

  - by mandy

  I'm having a trouble with my built in microphone. Even if I use headphone with mic, it doesn't really work. The weird thing is, if I clap the green lines of the speaker icon jumps, but if I speak it doesn't. I have also tried some recordings, but I can not hear myself and adjusting the volume didn't help at all. I tried to restore it, still no change. I have updated it in the device manager, but it said there that it's up to date and the devices are working properly. Until I decided to recover the whole system (wherein I pressed zero and switch on button) to my surprise, the settings became different, most programs were deleted, even my files. It's like it was formatted and I'm so sad that the mic was not fixed. I really don't know what to do now. My laptop model is Toshiba satellite m840. I want to it return to its settings/set up just before I Recover the system and bring back all the programs that we're installed and of course, most of all, to fix my microphone so I can use Skype again and other video calling application.. I hope someone could help me. Thanks a lot!

  Read the article

• Standing and sitting while using a computer at work

  - by Adam Batkin

  I would like to be able to comfortably switch between sitting and standing while at work (I'm a software developer, so I spend most of my day in front of a computer). For the past couple of months I have been using a large elevated stand that sits on my desk (designed expressly for this purpose) containing my keyboard and mouse, and my monitors have been raised as high as possible and aimed upwards. So I can stand all day and I'm pretty comfortable (my right wrist may be at too much of an angle when it's on my mouse, but that's a separate issue). The only problem is that sometimes I want to be able to sit. I can easily place my keyboard and mouse back down under the elevated stand, but I have to look up pretty steeply and that is uncomfortable and makes it difficult to see the screens since they are tilted upwards. My monitor mounts are difficult to adjust quickly/easily, so I can't just re-aim them. I would of course love one of those hydraulic standing/sitting desks (cost isn't the problem). But I'm in a row of "trader-style" desks where it's basically a very long surface with people sitting at 6-foot intervals. What type of equipment do you recommend? I suppose the best thing would be some sort of monitor stand (it must be able to hold 2-3 LCDs) that can easily be lowered and raised. But any other suggestions are also welcome.

  Read the article

• Doesn't work Nginx + SSI

  - by boopidoopi

  I have some problems. Nginx doesn't work with SSI. Nginx listens 80 port (frontend), apache2 listens 81 port (backend). That is my nginx configurations: server { listen 80; server_name test.dev www.test.dev; error_log /var/log/nginx/error.log debug; log_subrequest on; location / { ssi on; proxy_pass http://localhost:81; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 15m; client_body_buffer_size 128k; } } SSI include in test.dev index.php: <!--# include virtual="http:test.dev/test.html" -- When I open test.dev/index.php I see clean page. In page source: <!--# include virtual="http:test.dev/test.html" -- So how to enable SSI in nginx? Can you help me?

  Read the article

• Cant get squid proxy to work

  - by danielgratz

  i need squid proxy on my centos server. But i just can't get it to work. I did yum install squid. Here is my squid.conf file (i removed all comments): acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 acl Safe_ports port 80 acl Safe_ports port 21 acl Safe_ports port 443 acl Safe_ports port 70 acl Safe_ports port 210 acl Safe_ports port 1025-65535 acl Safe_ports port 280 acl Safe_ports port 488 acl Safe_ports port 591 acl Safe_ports port 777 acl CONNECT method CONNECT acl our_networks src 192.168.1.0/24 192.168.2.0/24 http_access allow our_networks http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access deny all icp_access allow all http_port 3128 hierarchy_stoplist cgi-bin ? access_log /var/log/squid/access.log squid acl QUERY urlpath_regex cgi-bin \? cache deny QUERY refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl apache rep_header Server ^Apache broken_vary_encoding allow apache coredump_dir /var/spool/squid Then i just put my server's public ip and port 3128 into my web browsers proxy settings... but it isn't working i can't visit any website. Please help. Thanks.

  Read the article

• Sound doesn't work anymore after replacing RAM

  - by thejh

  Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

  Read the article

• Upgrading from 13.04 to 13.10 stops

  - by BuZZ-dEE

  The upgrade to 13.10 stops after a lot of error messages about texlive packages, that I could close. The upgrade goes then further, but now it is stopped. What can I do to initiate the process again? The following are the last messages from the command window.: g multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 47: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 47: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 47: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 47: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 72: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 86: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 86: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 86: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 98: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 98: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 109: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 116: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 138: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 146: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 157: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 157: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 157: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 157: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 165: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 173: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 182: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 182: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/99-language-selector-zh.conf", line 11: Having multiple values in <test> isn't supported and may not work as expected ERROR: error('unpack requires a bytes object of length 4',) (apport-gtk:16828): Gtk-CRITICAL **: gtk_main_quit: assertion 'main_loops != NULL' failed

  Read the article

• Vista install works on one computer, but bluescreens another (on which Vista is known to work)

  - by Ken

  I hope my explanations make some sense -- please ask for clarification if they don't. I had a computer running Windows Vista (Ultimate, 64-bit). All was well! Then one day there was a nasty power surge at the office, and it died. (We didn't have surge protectors at the office, unfortunately. I assumed our lines were conditioned elsewhere, or was not an issue here. Oops.) After some testing, it was determined that the PSU, motherboard, and RAM were bad. While waiting for new hardware to arrive, I put my hard disk in a spare PC which had identical parts (mobo/CPU/RAM/PSU/video). Everything worked perfectly. The only way I could even tell it wasn't my computer is because Vista asked to re-activate itself with the new hardware, which worked fine, too. So the hard disk seems OK. Then the new parts arrived. The old motherboard model is no longer manufactured, so it's a new one with the same CPU/RAM/videocard/etc. slots. The PSU is also new, while the RAM I'm using is from the spare PC mentioned above. When I put it together and tried booting with my old hard disk, it starts to boot Windows, and then (fairly early in the process) gives a bluescreen and immediately reboots (so I can't see whatever the bluescreen is trying to tell me). I tried "safe mode", which also bluescreened. I tried booting the Vista DVD and running the repair utility, which found a Vista install, confirmed that it would not boot, and, eventually, declared that it was unable to repair it. I installed Vista fresh on a new hard disk, with the new mobo/etc., and it works perfectly. (That's what I'm running now.) I've also booted a Linux CD here, which ran great, and I've run Memtest86+ for a while, which found no errors. So all the hardware apart from the old hard disk seems OK, too. I don't think the problem is with my old Vista hard disk, since I used that with another mobo/CPU just fine. I don't think it's any other part of the new hardware, since I'm able to use it (and test it) with no trouble. It's just the combination of my old Vista install plus the new PC hardware that's not happy. I can get my data off my old hard disk and onto my new hard disk, and reinstall my apps, but it would be nice if I could fix things so I could continue to use my old hard disk as before. The latest hypothesis I've heard is that Vista had trouble with the new hardware (i.e., motherboard), but we have no idea what to do about that (except Safe Mode, which didn't work). Suggestions? Hypotheses for what's not right about this combination of Vista install and motherboard? Thanks!

  Read the article

• kill -9 doesn't work

  - by Daniel

  I have a server with 3 oracle instances on it, and the file system is nfs with netapp. After shutdown the databases, one process for each database doesn't quit for a long time. Each kill -i doesn't work. I tried to truss, pfile it, the command through error. And iostat shows there are lots of IO to the netapp server. So someone said the process was busy writing data to remote netapp server, and before the write complete, it won't quit. So what need to be done was just wait until all the IO was done. After wait for longer time (about 1.5 hours), the processes exit. So my question is: how can a process ignore the kill signal? As far as I know, if we kill -9, it will stop immediately. Do you encounter such situation kill -i doesn't kill the process right away? TEST7-stdby-phxdbnfs11$ ps -ef|grep dbw0 oracle 1469 25053 0 22:36:53 pts/1 0:00 grep dbw0 oracle 26795 1 0 21:55:23 ? 0:00 ora_dbw0_TEST7 oracle 1051 1 0 Apr 08 ? 3958:51 ora_dbw0_TEST2 oracle 471 1 0 Apr 08 ? 6391:43 ora_dbw0_TEST1 TEST7-stdby-phxdbnfs11$ kill -9 1051 TEST7-stdby-phxdbnfs11$ ps -ef|grep dbw0 oracle 1493 25053 0 22:37:07 pts/1 0:00 grep dbw0 oracle 26795 1 0 21:55:23 ? 0:00 ora_dbw0_TEST7 oracle 1051 1 0 Apr 08 ? 3958:51 ora_dbw0_TEST2 oracle 471 1 0 Apr 08 ? 6391:43 ora_dbw0_TEST1 TEST7-stdby-phxdbnfs11$ kill -9 471 TEST7-stdby-phxdbnfs11$ ps -ef|grep dbw0 oracle 26795 1 0 21:55:23 ? 0:00 ora_dbw0_TEST7 oracle 1051 1 0 Apr 08 ? 3958:51 ora_dbw0_TEST2 oracle 471 1 0 Apr 08 ? 6391:43 ora_dbw0_TEST1 oracle 1495 25053 0 22:37:22 pts/1 0:00 grep dbw0 TEST7-stdby-phxdbnfs11$ ps -ef|grep smon oracle 1524 25053 0 22:38:02 pts/1 0:00 grep smon TEST7-stdby-phxdbnfs11$ ps -ef|grep dbw0 oracle 1526 25053 0 22:38:06 pts/1 0:00 grep dbw0 oracle 26795 1 0 21:55:23 ? 0:00 ora_dbw0_TEST7 oracle 1051 1 0 Apr 08 ? 3958:51 ora_dbw0_TEST2 oracle 471 1 0 Apr 08 ? 6391:43 ora_dbw0_TEST1 TEST7-stdby-phxdbnfs11$ kill -9 1051 471 26795 TEST7-stdby-phxdbnfs11$ ps -ef|grep dbw0 oracle 1528 25053 0 22:38:19 pts/1 0:00 grep dbw0 oracle 26795 1 0 21:55:23 ? 0:00 ora_dbw0_TEST7 oracle 1051 1 0 Apr 08 ? 3958:51 ora_dbw0_TEST2 oracle 471 1 0 Apr 08 ? 6391:43 ora_dbw0_TEST1 TEST7-stdby-phxdbnfs11$ truss -p 26795 truss: unanticipated system error: 26795 TEST7-stdby-phxdbnfs11$ pfiles 26795 pfiles: unanticipated system error: 26795

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >