Search Results

Search found 2455 results on 99 pages for 'blueraja the green unicorn'.

Page 52/99 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• Macbook Pro 15-inch replacement battery.

  - by ricbax

  So I've finally got to the 300+ cycles with my MBP 2008's original battery. Apple is pretty much "on the money" too! I am at 79% Health and getting the Condition: Replace Soon warning. So I went out to the closest Apple Store and bought a replacement. I would like to get the same lifespan out of my replacement if possible. My question is: The battery comes with a 2 dot (green) charge on the indicator, should I put the battery in and let it run down and do a full recharge OR begin charging it immediately and then let it run all the way to empty and recharge?

  Read the article

• LAN cable not connected, but it is

  - by Koen

  I have a Windows XP SP2 desktop PC. It connects to the internet with a LAN cable (there's a wireless router for my laptop in between). The problem should be software because: when i tried connecting the same LAN cable to my laptop it works when i plugin the LAN cable (onboard) the green light is on and the orange light flickers when i tried the other cable (that feeds the wireless router) i have the same problem it worked a few days ago, nothing specific changed I tried removing the ethernet card from the device manager, and windows automatically reinstalled it. What could cause this? What can I try?

  Read the article

• XP Mode under Win 7 Professional: Windows Activation Update failure despite activated Windows

  - by Cristina

  I am trying to install Windows XP Mode from here: http://www.microsoft.com/windows/virtual-pc/download.aspx (the Hardware-Assisted Virtualization Detection Tool has given me the green for proceeding) Even though my Windows has been activated a year or so ago, the download button leads me to a splash screen saying "Windows validation required". I am next forced to download a WindowsActivationUpdate.exe which, after downloading some mysterious "update", fails with the error message "Update installation failed, error information 0x80070002" (rough translation from German). I've tried running it both normally and as Administrator. What could be the problem?

  Read the article

• how to separate a network for traffic

  - by Student_CVO

  At the moment our all computers in one big LAN, it is the intention to separate the admin and edu (it's in a school) especially for traffic and less for security. How do this best? I have a drawing, but can't post it (a can send it in a mail) Firewall?, VLAN?, IPCop (no two green zones)?, pfsense? ... Should there be two scopes on the dhcp server (WIN 2008 R2), one for admin and one for edu or is one scope enough? I would like your advice, I am a student in training with this task as a project. Thanks

  Read the article

• Fixing/Extending Standard Windows File Open/Save Dialog [closed]

  - by scunliffe

  Possible Duplicate: Change left side link of the Save As Dialog for a DropBox one? Almost every time I use the standard Windows (XP) File Open/Save Dialog I get frustrated in how long it takes me to navigate to where I want to go. :-( (I won't even get into the MS Office dialog that makes things even worse) This is the dialog I'm referring to (with some notes) Notes: Wouldn't a Drive list be handy in here? C:\, D:\, E:\, etc. What about a breadcrumb URI? (the magenta list of links) Why isn't Program Files one of the icons on the left? (green) I'm always going in there for something Why can't I type "../../../" to navigate up multiple directories in the File name box? (blue) There has got to be some utilities out there that can "hijack" or "overwrite" this core windows dialog to provide a much better set of options. I'm looking for any/all solutions to help fix this dialog.

  Read the article

• Mac OS X app window is too large - how can I resize?

  - by Kyle Cronin

  I'm a MacBook user, and when I'm home I plug into a large external monitor to get additional screen space. When I'm on the go I disconnect and use my laptop's built-in display. For the most part this arrangement works very well; however, I occasionally run into an issue where I'll resize an app on the external, causing it to be too large to fit on the built-in screen when I disconnect. Most apps don't have a problem decreasing their height automatically or resizing to fit when I click the green orb, but some (like iTunes) don't want to cooperate. How can I resize apps like iTunes without reconnecting to my external? Here's a screenshot:

  Read the article

• Fujitsu Siemens V6535 laptop doesn't wake up - crash when going into standby?

  - by marc

  I'm having trouble with my laptop (Fujitsu Siemens model V6535). It runs Windows 7, and after I upgraded from Vista I've noticed something that makes me really angry. When my laptop goes into Standby, the power LED changes to red and starts blinking (standby mode). When I push the power button to wake it up it, the blinking LED changes to green but nothing else happens. Nothing on the display, no HDD sound. When I press the power button for a few seconds and then try turn it on again, it doesn't display anything. I have to unplug the charger, shut it off, and power it on again without the power cable. Then it starts working. A few days ago I upgraded the BIOS to the newest version, but it doesn't help. Does anyone have any idea what can be wrong?

  Read the article

• IBM x226 server with Windows 2003 freezing and showing one HDD degraded

  - by Zvonko Telefonko

  We have an IBM x226 server with Windows 2003 running on it. For weeks it's been very slow and it freezes at least once each day. At the boot it show message "degraded" for one HDD and optimal for other HDDs. We have 4 HDDs in it set up in Raid 1. HDD 1 - HDD 2, HDD 3 - HDD4. It seems that HDD2 is the one who is causing problems (showing degraded status). There's an amber led blinking on it together with the green one. We installed ServerRAID manager downloaded from IBM and it gave us option for "rebuild". But the server froze at some point and now it's rebuilding from start again. I've done some Googling and it says that it could be to failing HDD or some cache battery. How can we verify what is the cause of this?

  Read the article

• How come transparency in textures appears as white in 3ds Max?

  - by rFactor

  I have downloaded a free tree palm model that came with textures and a preview image. In the preview image the tree looks fine, but when I have deployed the textures to my scene, the leaves look green plus white, where white is the transparency area. Is there something I need to know about transparent textures? Both in the view-port and in the renderer all transparency appears as white. What could it be? Edit: The model I was talking about is implemented with two JPGs. One is textured and the other one is black-white where white represents transparency and is applied to the material in the opacity channel/map. The transparency seems to work somewhat, but there are white borders around the leaves. I think it's because the opacity channel does not properly filter out all white colors for some reason. It also seems that changing the blur affects it, but setting it to 0 does not remove it though (and makes it jaggy).

  Read the article

• Logitech Mouse stopped working after changing batteries!

  - by Martti Laine

  I just changed batteries for my optical wireless Logitech mouse, but it stopped working; When I put it on, it waits a second and then keeps the green light for few seconds. After that it just stops responding and doesn't show the light even if I'm moving it. Does this have something to do with batteries? I took new, so they're not empty. And I think it cannot be on batteries, because it keeps the light first, but then just stops responding. Please help, I would be very very thankfull. This makes me mad to use this mousepad :D EDIT: Wow, what an fast answer!! Thank you, but you wanted to know this mouse? I think it's Logitech M205, watched from Logitech site, because have not the original package anymore :S I couldn't find any buttons in receiver, but mouse has button called "reset". Is that the right one?

  Read the article

• wamp - Changing PHP version stops server running

  - by James Connor

  I downloaded wamp which works (green icon). However I need to test a site locally in Joomla 1.5 which caused errors when using php 5.3 I believe I need a PHP version lower then this i.e 5.2.x To do this I have gone through PHP - Version - Get More.. and installed a older PHP version. However when I start this PHP version the icon stays on an orange colour and going in localhost doesn't work. I haven't used wamp before so my knowledge of it is limited. If anyone could point me in the right direction it would be greatly appreciated, Regards.

  Read the article

• VMWare Workstation Dev Machine Disks: one fast or four echofriendly raid?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines - A dev machine running VS-2010, a build machine, a version-control machine, a web server for testing, a "personal" machine running office etc. I'll be connecting the computer to my stereo, so I'll also be running iTunes (possible on a dedicated VM) and I want the computer to be a silent one. I'll probably use an Antec P183 case. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. So, my question is as follows: In terms of heat, noise, reliability, warranty, price, capacity and performance, what would you suggest: A Raid10 4 disk array using eco-friendly disks such as the $94 1TB Western Digital Caviar Green, or one high performance disk such as the 2TB Western Digital Caviar Black at $280?

  Read the article

• My MacBook Pro (2011) is dead

  - by Dave

  I connected my Sony digital camera with the MacBook and the screen turned black. I wonder why because the Sony camera was not on at the time and technically could not be accessed. So I thought it might be temporary and I turned on my camera. Well, it did not work, but my MacBook Pro has been dead since then. It will not turn on - when I hold the power button for five seconds, nothing happens. When I connect the charger cable, the green light is very dim and blinks a little (with about 20% illumination). I wonder what the problem is. I have to call Apple Care, but just so that I know, what could be wrong? Is my MacBook permanently dead? It might be under warranty but I am not sure.

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Error When Trying to Exchange Encrypted Emails with Sender Outside Domain

  - by LucidLuniz

  I have an end user who is trying to exchange encrypted messages with a person outside of our company domain. When receiving emails from the user they receive a message that says: Signed By: (There were errors displaying the signers of this message, click on the signature icon for more details.) However, when you click on the signature icon it says: The digital signature on this message is Valid and Trusted. Then when you look at the "Message Security Properties" it shows two layers, each with a green checkmark beside them. The layers are presented as below: Subject: Digital Signature Layer It also has: Description: OK: Signed message The end result with all of this is that when the user on my side tries to send this user an encrypted message it says: Microsoft Outlook had problems encrypting this message because the following recipients had missing or invalid certificates, or conflicting or unsupported encryption capabilities: Continue will encrypt and send the message but the listed recipients may not be able to read it. However, the only options you are actually given is "Send Unencrypted" and "CanceL" (Continue is grayed out). If anybody can assist I would greatly appreciate it!

  Read the article

• How to force-resize a window in OS X ?

  - by cwd

  I remember from my Windows XP days that there was a utility that would let me re-size non-re-sizable windows. Is there something like that on OS X? I'm using PandoraJam and it is sort of iframing the pandora player. Pandora has recently changed the size of the player and PandoraJam has not caught up. I can hit the green zoom button but that changes it to a much bigger player with ads. It would be nice if there was a utility that would just let me force-resize it. This would also be handy for a few other apps too. Thanks!

  Read the article

• Movie colors are off on ubuntu

  - by chris

  I've been playing with a new SLR that also happens to record movies. When I try to view a movie using Movie Player, it plays fine, and the sound is there, but the colors are off - green grass is purple, and my golden retriever is a blue retriever. VLC reports that the file is broken, offers to repair it, and plays it with the same problem. The same file plays fine under WinXP with both Media Player and Quicktime, and with no problems under MacOS also with Quicktime. What's the problem, and how can I fix it?

  Read the article

• Windows Proxy Server advice

  - by Scott

  I have a webserver that currently has about 10 IP addresses. I have various clients that require a proxy server to route their internal traffic through. The load is not that great, so I'd like to have this ONE server act as a proxy server for 10 different clients, each client having their own unique IP on the server. The hardware is already setup, but I'm wondering what software solutions you guys recommend? I've looked at WinGate, Squid-Proxy, etc...but am pretty green with this. Maybe there's even a way to have Windows do this natively? I'm running Windows Server 2008, 32 bit.

  Read the article

• How much power supply do I need for my server, and could a shortage be causing my odd crashing?

  - by dolan

  I have 5 servers, all with similar hardware (i7, four 2tb 7200rpm drives, two 4tb 5400rpm drives, 430 watt power supply), and lately the machines have been freezing up. This has gotten worse in the last day or so, and I can't pinpoint any explanation. One recent change was adding the two 4tb hard drives. The crashes happen most often while running a large Hadoop job, so I was originally thinking the load was causing some issues, but last night one server just froze without any heavy load on the box (or so I think), other than HDFS (Hadoop's distributed file system) was probably rebalancing itself since two of the five nodes were offline. If I plugin a monitor and keyboard to one of these frozen machines, I can't get any response or feedback on the screen. Any ideas on possible points of failure and/or different logs I can look at to investigate? Thanks Edit: The systems are running Ubuntu 10.04 Edit 2: More on hardware: intel core i7-930 bloomfield 2.8ghz processor (quad core) 12gb (6 x 2gb) kingston ddr3 1333 ram antec earthwatts green 430 power supply msi x58m lga 1366 motherboard

  Read the article

• Slow write speeds on new Gigabit home file server

  - by Ryan Holder

  So I finally got all my parts delivered to setup a home file/backup server this week. It's currently running Ubuntu Server and I'm using Samba to share files on my network. The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D). My home desktop is then also connected to this switch and again also through CAT6a cable. Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s. I know this drive is capable is faster speeds so would anybody have an idea of where the bottleneck is? Any help would be greatly appreciated :) EDIT: I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware

  Read the article

• How can I copy and paste formatted text in Excel?

  - by Landy

  Before I ask question, I've searched but only found ways of copy and paste "formatted cell". That's not what I need. I want to use an example to explain my requirement: There are 2 cells in a sheet. Cell_A's text is "aaaaabbbbb", and "aaaaa" is green, and "bbbbb" is red. Cell_B's text is "ccccc" and "ccccc" is black. I want to copy and paste "bbbbb" from Cell_A to Cell_B and keep "bbbbb" in red. But in my environment(Office 2007), "bbbbb" is changed to black as "ccccc", the default format of Cell_B. Is there an easy way to implement my requirement?

  Read the article

• What do light purple color mean in uTorrent

  - by blasteralfred

  I run uTorrent 3.1.2 in my Windows 7 PC. When I download one file, I see some purple colored lines under Files Tab Pieces. Below is an image of what I am telling (little resized); I think that the light green color indicates downloaded parts. But I have no idea about purple lines. The file is a streamable mp3 file. The connection speed is very low, about 5KB/s down and 1KB/s up. The done file size is not progressing in a smooth way (usually changes in KB are visible), it stays as it is for sometime and then changes to a size (changes in MB), and again the same thing. Questions: Why does this happen? What does the purple color mean? Thank you.

  Read the article

• plugging in a 3.3V 50pin laptop HDD to USB?

  - by barlop

  I have a 50pin laptop hard drive. 1.8" wide. This 50pin connector concerns me.. Even if I get an adaptor, How can I know which side of the connector takes the power? I don't want to plug it in the wrong way. And I don't have n adaptor.. Could people link me to adaptors too. but main question is, which side to plug it in when I get the adaptor. I want to be sure. I do not want to blow the hdd. For the 3.3V I have a plan. Connecting green and black and using the orange cable(3.3v) to feed power. I am not too worried about that bit. But as I said.. Main thing is I want to know which side is 3.3V hard drive is MK6006GAH

  Read the article

• How to change color of a cell in one sheet if its value increases or decreases from another cell value in a different sheet

  - by Sean Coffey

  I am putting together a workbook with 52 sheets for the weeks in the year. In this workbook there are multiple columns for percentages on each sheet. I want to be able to change the color of each cell based on whethernit increases (green) or decreases (red) from the same cell in the previous sheet. I have the formula i.e. =IF(ISERROR(B4/D4),"0", B4/D4) to calculate my percentages but I don't know how to put the reference in for this change. Any help?

  Read the article

• Ubuntu 10 installer stops after asking for username and password

  - by Jorn

  I am trying to install Ubuntu 10.10. It's running fine, until I get to the step where it asks me to specify my name, computer name, user name and password. I have filled in all those fields and all of them display a green checkmark. However, the Forward button doesn't enable. The installer continues copying files, and when it's done it says Ready when you are... in the status bar. Still, Forward is disabled. Anyone know what the problem could be?

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >