Search Results

Search found 3993 results on 160 pages for 'broken pipe'.

Page 52/160 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • Why is it assumed that send may return with less than requested data transmitted on a blocking socke

    - by Ernelli
    The standard method to send data on a stream socket has always been to call send with a chunk of data to write, check the return value to see if all data was sent and then keep calling send again until the whole message has been accepted. For example this is a simple example of a common scheme: int send_all(int sock, unsigned char *buffer, int len) { int nsent; while(len 0) { nsent = send(sock, buffer, len, 0); if(nsent == -1) // error return -1; buffer += nsent; len -= nsent; } return 0; // ok, all data sent } Even the BSD manpage mentions that ...If no messages space is available at the socket to hold the message to be transmitted, then send() normally blocks... Which indicates that we should assume that send may return without sending all data. Now I find this rather broken but even W. Richard Stevens assumes this in his standard reference book about network programming, not in the beginning chapters, but the more advanced examples uses his own writen (write all data) function instead of calling write. Now I consider this still to be more or less broken, since if send is not able to transmit all data or accept the data in the underlying buffer and the socket is blocking, then send should block and return when the whole send request has been accepted. I mean, in the code example above, what will happen if send returns with less data sent is that it will be called right again with a new request. What has changed since last call? At max a few hundred CPU cycles have passed so the buffer is still full. If send now accepts the data why could'nt it accept it before? Otherwise we will end upp with an inefficient loop where we are trying to send data on a socket that cannot accept data and keep trying, or else? So it seems like the workaround, if needed, results in heavily inefficient code and in those circumstances blocking sockets should be avoided at all an non blocking sockets together with select should be used instead.

    Read the article

  • Google maps not showing satellite background - streets on white background.

    - by WooYek
    Custom map is broken on satellite view, does not show satellite imagery. Any ideas, what's wrong? Overlays are also broken - they're not transparent. Code: <div id="map_canvas" class="grid_8 omega" style="width:460px; height: 420px"></div> <script src="http://maps.google.com/maps?file=api&amp;v=3&amp;sensor=true&amp;key=my-key-is-here" type="text/javascript"></script> <script type="text/javascript"> function initialize() { if (GBrowserIsCompatible()) { var map = new GMap2(document.getElementById("map_canvas")); map.setCenter(new GLatLng(52.229676, 21.012229), 13); map.setMapType(G_HYBRID_MAP); map.setUIToDefault(); } var geocoder = new GClientGeocoder(); function showAddress(address) { geocoder.getLatLng(address, function(point) { if (!point) { alert('Nie mozna znalezc adresu: '+address); } else { map.setCenter(point, 13); var marker = new GMarker(point); map.addOverlay(marker); marker.openInfoWindowHtml(address); } } ); } showAddress('some address goes here') } $('body').ready(initialize); $('body').unload(GUnload); </script>

    Read the article

  • SQL Server Blocking Issue

    - by Robin Weston
    We currently have an issue that occurs roughly once a day on SQL 2005 database server, although the time it happens is not consistent. Basically, the database grinds to a halt, and starts refusing connections with the following error message. This includes logging into SSMS: A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) Our CPU usage for SQL is usually around 15%, but when the DB is in it's broken state it's around 70%, so it's clearly doing something, even if no-one can connect. Even if I disable the web app that uses the database the CPU still doesn't go down. I am unable to restart the SQLSERVER process as it is unresponsive, so I have to end up killing the process manually, which then puts the DB into Suspect/Recovery mode (which I can fix but it's a pain). Below are some PerfMon stats I gathered when the DB was in it's broken state which might help. I have a bunch more if people want to request them: Active Transactions: 2 (Never Changes) Logical Connections: 34 (NC) Process Blocked: 16 (NC) User Connections: 30 (NC) Batch Request: 0 (NC) Active Jobs: 2 (NC) Log Truncations: 596 (NC) Log Shrinks: 24 (NC) Longest Running Transaction Time: 99 (NC) I guess they key is finding out what the DB is using it's CPU on, but as I can't even log into SSMS this isn't possible with the standard methods. Disturbingly, I can't even use the dedicated admin connection to get into SSMS. I get the same timout as with all other requests. Any advice, reccomendations, or even sympathy, is much appreciated!

    Read the article

  • TFS 2010 Build gives WorkItemStore error when Create Work Item on Failure is enabled

    - by Derek Morrison
    I'm using TFS 2010 Build. I have a build definition that uses the DefaultTemplate.xaml template that's stock in TFS 2010, and the Create Work Item on Failure property is set to True in the build definition. I deliberately made a change in my project that breaks the build. When the build runs, I see the compilation error reflected in the TFS Build log within Visual Studio, but I get the error "Value cannot be null. Parameter name: WorkItemStore" when TFS Build next tries to generate a Work Item for the broken build. I tracked down the activity in DefaultTemplate.xaml (see the rather lengthy path to it below) where the Work Item is created for a broken build, and I see it uses the Microsoft.TeamFoundation.Build.Workflow.Activities.OpenWorkItem class to create the Work Item. The appropriate values seemed to be filled out in the Properties window for the Create Work Item activity, so I don't see where I can pass WorkItemStore to it and I don't even know appropriate values for this setting. Path to the Create Work Item activity: Process Sequence Run On Agent Try Compile, Test, and Associate Changesets and Work Items Sequence Compile, Test, and Associate Changesets and Work Items Try Compile and Test Compile and Test For Each Configuration in BuildSettings.PlatformConfigurations Compile and Test for Configuration If BuildSettings.HasProjectsToBuild For Each Project in BuildSettings.ProjectsToBuild Try to Compile the Project Handle Exception If CreateWorkItem Create Work Item for non-Shelveset Builds Create Work Item

    Read the article

  • Problem with Restlet on GAE

    - by Leaf
    I'm trying to implement a calculator web service on GAE using Java Restlets... it works perfectly fine on localhost but when I upload my project to the Google App Engine everytime I try the web service link it says the link is broken. Here's the code I used: public Restlet createInboundRoot() { // Create a router Restlet that routes each call to a // new instance of HelloWorldResource. Router router = new Router(getContext()); Restlet restlet = new Restlet() { public void handle(Request request, Response response) { // Print the requested URI path String parameters = request.getResourceRef().getRemainingPart(); String message; if(parameters.charAt(0)=='?'){ message = "" + Calculator.calculate(parameters.substring(1)); } else { message = ""; } response.setEntity(message, MediaType.TEXT_PLAIN); } }; // Defines only one route router.attachDefault(restlet); return router; } The Application it's on is mapped to the /calcservice but as I said when I upload to GAE it comes back with a broken link error. I'm developing on Eclipse 3.4 and I'm wondering if there are any parameters I have to change to include the Restlet classes.

    Read the article

  • HTTP: can GET and POST requests from a same machine come from different IPs?

    - by NoozNooz42
    I'm pretty sure I remember reading --but cannot find back the links anymore-- about this: on some ISP (including at least one big ISP in the U.S.) it is possible to have a user's GET and POST request appearing to come from different IPs. (note that this is totally programming related, and I'll give an example below) I'm not talking about having your IP adress dynamically change between two requests. I'm talking about this: IP 1: 123.45.67.89 IP 2: 101.22.33.44 The same user makes a GET, then a POST, then a GET again, then a POST again and the servers see this: - GET from IP 1 - POST from IP 2 - GET from IP 1 - POST from IP 2 So altough it's the same user, the webserver sees different IPs for the GET and the POSTs. Surely seen that HTTP is a stateless protocol this is perfectly legit right? I'd like to find back the explanation as to how/why certain ISP have their networks configured such that this may happen. I'm asking because someone asked me to implement the following IP filter and I'm pretty sure it is fundamentally broken code (breaking havoc for at least one major american ISP users). Here's a Java servlet filter that is supposed to protect against some attacks. The reasoning is that: "For any session filter checks that IP address in the request is the same that was used when session was created. So in this case session ID could not be stolen for forming fake sessions." http://www.servletsuite.com/servlets/protectsessionsflt.htm However I'm pretty sure this is inherently broken because there are ISPs where you may see GET and POST coming from different IPs. Any info on this subject is very welcome.

    Read the article

  • How to detect a WCF session crash before calling a contract method?

    - by brain_pusher
    I am using a session mode for my WCF service. The problem is the following: if session is broken and no longer exists, client can't know it before calling a contract. For example, if the service has been restarted, the client's session id is invalid, because that session has been closed on the server side. I check the channel state before calling the contract and its value is CommunicationState.Opened even if session is already broken. So, when I call the contract after this check I get a CommunicationException with this message: The remote endpoint no longer recognizes this sequence. This is most likely due to an abort on the remote endpoint. The value of wsrm:Identifier is not a known Sequence identifier. The reliable session was faulted. Is there any workaround? I need a way to get an appropriate session state before calling a contract so that I can restore it without getting an exception. P.S. The CommunicationException type is general, so I can't detect a session crash by catching this exception. P.P.S. I have asked the similar question here, but in that case I didn't know the reason, now I don't know how to evade it.

    Read the article

  • Are finalizers ever allowed to call other managed classes' methods?

    - by romkyns
    I used to be pretty sure the answer is "no", as explained in Overriding the Finalize method and Object.Finalize documentation. However, while randomly browsing through FileStream in Reflector, I found that it can actually call just such a method from a finalizer: private SafeFileHandle _handle; ~FileStream() { if (this._handle != null) { this.Dispose(false); } } protected override void Dispose(bool disposing) { try { ... } finally { if ((this._handle != null) && !this._handle.IsClosed) // <=== HERE { this._handle.Dispose(); // <=== AND HERE } [...] } } I started wondering whether this will always work due to the exact way in which it's written, and hence whether the "do not touch managed classes from finalizers" is just a guideline that can be broken given a good reason and the necessary knowledge to do it right. I dug a bit deeper and found out that the worst that can happen when the "rule" is broken is that the managed object being accessed had already been finalized, or may be getting finalized in parallel on a separate thread. So if the SafeFileHandle's finalizer didn't do anything that would cause a subsequent call to Dispose fail then the above should be fine... right? Question: so there might after all be situations in which a method on another managed class may be called reliably from a finalizer? I've always believed this to be false, but this code suggests that it's possible and that there can be good enough reasons to do it. Bonus: Observe that the SafeFileHandle will not even know it's being called from a finalizer, since this is just a normal call to Dispose(). The base class, SafeHandle, actually has two private methods, InternalDispose and InternalFinalize, and in this case InternalDispose will be called. Isn't this a problem? Why not?...

    Read the article

  • Latex multicols. Can I group content so it won't split over cols and/or suggest colbreaks?

    - by valadil
    Hi. I'm trying to learn LaTeX. I've been googling this one for a couple days, but I don't speak enough LaTeX to be able to search for it effectively and what documentation I have found is either too simple or goes way over my head (http://www.uoregon.edu/~dspivak/files/multicol.pdf) I have a document using the multicol package. (I'm actually using multicols* so that the first col fills before the second begins instead of trying to balance them, but I don't think that's relevant here.) The columns output nicely, but I want to be able to indicate that some content won't be broken up into different columns. For instance, aaaaaaaa bbbbbbb aaaaaaaa bbbbbbb aaaaaaaa ccccccc bbbbbbbb ccccccc That poor attempt at ascii art columns is what's happening. I'd like to indicate that the b block is a whole unit that shouldn't be broken up into different columns. Since it doesn't fit under the a block, the entirety of the b block should be moved to the second column. Should b be wrapped in something? Is there a block/float/section/box/minipage/paragraph structure I can use? Something specific to multicol? Alternatively is there a way that I can suggest a columnbreak? I'm thinking of something like \- that suggests a hyphenated line break if its convenient, but this would go between blocks. Thanks!

    Read the article

  • Empty Postbacks on ASP.NET pages

    - by AaronLS
    We are having a problem that seems to only be a problem when accessing our websites from internal intranet machines. When logged into the domain, and accessing our websites, postbacks are not working. Basically the page behaves as if it were refreshed and nothing was changed. When logging the GETs and POSTs with an HTTP analyzer, the post is complete empty and the ContentLength is 0. It is also very sporadic, but seems to be happening fairly often. In the case where it failed, we could see that there was an extra item in the Header for the POST, it was "Authorization" and the value was the word "Negotiate " followed by a space and then a bunch of characters and two equal symbols at the end, which looked like some kind of base64 encoded value. In a case where it succeeded, this Authorization item was no in the header, but I have logged more than one successful cases to know if that is consistent. We have seen this occur only with IE8 so far, and when it occurs it is sometimes sporadic. I can close and open the browser and it will begin working sometimes, and other times it is still broken. What might be causing the postback to be empty? This means the viewstate is not sent to the server which makes the page basically broken. It seems to certainly be a client side issue, but not sure if it's not aggravated by some server settings. Thanks in advance.

    Read the article

  • My project is no longer used - how should I feel?

    - by flybywire
    For the last two years I have been developing and supporting an important project for a big customer. The project included mining data from the customer's existing systems, processing, and displaying and updating in the customer's public home page. The project was defined as crucial by the customer and I was payed good money and flown at the customer's expense to meet key employees. Some months ago, when the project was finished and in maintainance mode, I informed the customer that I am no longer interested in doing it as I had a new opportunity that would not be compatible with my existing customer. I was payed to train one of their employees, flown to meet him, make sure everything works and that he can be safely left in charge of the project. We finished in good terms after I complied with all my obligations and they payed me all they owed me. Some days ago, just out of curiosity, I entered to their website to see how the data continues to be updated and much to my dismay I discovered that the day after my contract was finished my system was "turned off" and it ceased to feed data to the public website. Let's put it clear, there is no issue of money or broken contract here. They are in they full right to do whatever they want with my software. But it is an issue of broken "programmer's ego". Should I feel bad about it (I do). Should I care and check out with my customer if they need some help? Or is it none of my matters?

    Read the article

  • Looking for resources to explain a security risk.

    - by Dave
    I've a developer which has given users the ability to download a zip archive which contains an html document which references a relative javascript file and flash document. The flash document accepts as one of it's parameters a url which is embedded in the html document. I believe that this archive is meant to be used as a means to transfer an advertisement to someone who would use the source to display the ad on their site, however the end user appears to want to view it locally. When one opens the html document the flash document is presented and when the user clicks on the flash document it redirects to this embedded url. However, if one extracts the archive on the desktop and opens the html document in a browser and clicks the flash object, nothing observable happens, they will not be redirected to the external url. I believe this is a security risk because one is transferring from the local computer zone to an external zone. I'm trying to determine the best way to explain this security risk in the simplest of terms to a very end user. They simply believe it's "broken" when it's not broken, they're being protected from a known vulnerability. The developer attempted to explain how to copy the files to a local iis instance, which I highly doubt is running on the users machine, and I do not consider this to be a viable explanation.

    Read the article

  • Why does Firefox + My code Destroys FireFox refresh

    - by acidzombie24
    I am soo angry right now. I lost hours and i dont know why this happens. Its a semi rant but i'll try to keep it short My code would not work, even after refreshing it was broken I fixed my code or so i thought because it stops working without me changing anything (you would think i am imagining this...) I somehow decide to make a new window or tab i run my code and verifies it works. I write more code and see everything is broken again I write test in a new window and see my code does work I see my code doesnt work and firebug DOES NOT HELP I notice when i create a new tab everything works I realize refreshing does not work and i MUST make a new tab for my code to work. Then i knew instantly what the problem was. I modify a display:none textbox but i set the values incorrectly. I cant see it because it is hidden. Now some of you might say its my fault because when doing a refresh all of the data may be cache. But here is the kicker. I was using POST data. I posted in between of the refresh each and everytime. Whats the point of using POST when the same data is cached and use anyways? If theres no chance for a search engine to follow a block user get link then why should i bother making anything post when security or repeat actions are not an issue? POST didnt seem to do anything.

    Read the article

  • What is the strangest programming language you have used?

    - by Anders Sandvig
    For me I think it has to be the scripting language of an old proprietary telephony platform I used in the early 2000s. The language itself was not so bad, but the fact that it was meant to be edited with a drag-and-drop GUI, which did not expose all the functionality I needed, was quite frustrating. I also remember having to manually implement many common functions, such as calculating the length of a string. Whenever I wanted to use "custom" or "advanced" functions, I had to edit the script files in a text editor, but as soon as I opened the files in the GUI again they were reformatted and restructured, which usually resulted in broken code. And, of course, this was an interpreted language, so I would not know it was broken until I actually ran it—oh, and did I mention that it did not run the same in the simulator as in the live environment? So, what is the strangest programming language or environment you have used, and why did you use it? Note that I'm interested in languages and environments that you have actually used for "real-world" situations, so Whitespace, Brainf***k and friends are not valid—unless you have used them for something "real", of course.

    Read the article

  • Fedora 16 can connect to samba share using smbclient but not in nautilus 3.2.1

    - by Nathan Jones
    I have a machine running Ubuntu 11.10 Server acting as a Samba server to share my home directory. Everything works fine on my Windows 7 machine, but on my Fedora 16 laptop, if I use Nautilus to try to access the share using smb://192.168.0.8/nathan in the location bar, it just has the loading cursor and does nothing. It never shows any errors, nothing. Using smbclient works just fine, but I'd like to get it working in Nautilus. I know that there can be problems with SELinux and Samba, so I created a file called booleans.local that contains samba_enable_home_dirs=1. My smb.conf file looks like this: # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. pam password change = yes # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections map to guest = bad user ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones usershare allow guests = yes #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username [homes] comment = Home Directories browseable = yes # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. read only = no # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0775 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0775 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = no create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom smbusers: <nathan> = <"nathan"> Any help would be very much appreciated! Thanks!

    Read the article

  • Including an embedded framework using a cross-project-reference: Header no such file or directory

    - by d11wtq
    I'm trying to create a Cocoa framework by using a cross-project reference in Xcode. I have 2 projects: one for the framework; one for the application that will use the framework. This framework is not intended to be stored within the system; it is an embedded framework that lives within the application bundle. I have successfully made the cross-project reference, marked the framework as being a dependency of my target, added a Copy Files build phase that puts the framework in Contents/Frameworks/ and added the framework to the linker phase (I checked the little "Target" checkbox; I've also done it manually by dragging the framework into the linker phase). My framework's install directory is correctly set to @executable_path/../Frameworks. However, when I try to build my app it: a) Correctly builds the framework first b) Correctly copies the framework c) Errors because it cannot find the master header file in my framework I have verified that the header is there. I can see it in the app product that is partially built. ls build/Debug/CioccolataTest.webapp/Contents/Frameworks/Cioccolata.framework/Headers/Cioccolata.h build/Debug/CioccolataTest.webapp/Contents/Frameworks/Cioccolata.framework/Headers/Cioccolata.h I have been able to successfully build the app by copying my framework into /Library/Frameworks (I can then delete it again after the successful build), but this is a workaround, I'm looking to find it out why Xcode doesn't find the framework's master header file without it being copied to a system directory. Is copying it to the app bundle during the build not sufficient? Here's the full build transcript if it's any help (it's just a Hello World app right now, so not much going on here): Build Cioccolata of project Cioccolata with configuration Debug SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/Current A cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf A /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/Current SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Resources Versions/Current/Resources cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf Versions/Current/Resources /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Resources SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Headers Versions/Current/Headers cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf Versions/Current/Headers /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Headers SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Cioccolata Versions/Current/Cioccolata cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf Versions/Current/Cioccolata /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Cioccolata ProcessInfoPlistFile /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/Info.plist Info.plist cd /Users/chris/Projects/Mac/Cioccolata builtin-infoPlistUtility Info.plist -expandbuildsettings -platform macosx -o /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/Info.plist CpHeader build/Debug/Cioccolata.framework/Versions/A/Headers/CWHelloWorld.h CWHelloWorld.h cd /Users/chris/Projects/Mac/Cioccolata /Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Users/chris/Projects/Mac/Cioccolata/CWHelloWorld.h /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Headers CpHeader build/Debug/Cioccolata.framework/Versions/A/Headers/Cioccolata.h Cioccolata.h cd /Users/chris/Projects/Mac/Cioccolata /Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Users/chris/Projects/Mac/Cioccolata/Cioccolata.h /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Headers CopyStringsFile /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/English.lproj/InfoPlist.strings English.lproj/InfoPlist.strings cd /Users/chris/Projects/Mac/Cioccolata setenv ICONV /usr/bin/iconv /Developer/Library/Xcode/Plug-ins/CoreBuildTasks.xcplugin/Contents/Resources/copystrings --validate --inputencoding utf-8 --outputencoding UTF-16 English.lproj/InfoPlist.strings --outdir /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/English.lproj ProcessPCH /var/folders/Xy/Xy-bvnxtFpiYBQPED0dK1++++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/Cioccolata_Prefix-dololiigmwjzkgenggebqtpvbauu/Cioccolata_Prefix.pch.gch Cioccolata_Prefix.pch normal i386 objective-c com.apple.compilers.gcc.4_2 cd /Users/chris/Projects/Mac/Cioccolata setenv LANG en_US.US-ASCII /Developer/usr/bin/gcc-4.2 -x objective-c-header -arch i386 -fmessage-length=0 -pipe -std=gnu99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -isysroot /Developer/SDKs/MacOSX10.5.sdk -mfix-and-continue -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-generated-files.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-own-target-headers.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-all-target-headers.hmap -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-project-headers.hmap -F/Users/chris/Projects/Mac/Cioccolata/build/Debug -I/Users/chris/Projects/Mac/Cioccolata/build/Debug/include -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources/i386 -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources -c /Users/chris/Projects/Mac/Cioccolata/Cioccolata_Prefix.pch -o /var/folders/Xy/Xy-bvnxtFpiYBQPED0dK1++++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/Cioccolata_Prefix-dololiigmwjzkgenggebqtpvbauu/Cioccolata_Prefix.pch.gch CompileC build/Cioccolata.build/Debug/Cioccolata.build/Objects-normal/i386/CWHelloWorld.o /Users/chris/Projects/Mac/Cioccolata/CWHelloWorld.m normal i386 objective-c com.apple.compilers.gcc.4_2 cd /Users/chris/Projects/Mac/Cioccolata setenv LANG en_US.US-ASCII /Developer/usr/bin/gcc-4.2 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=gnu99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -isysroot /Developer/SDKs/MacOSX10.5.sdk -mfix-and-continue -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-generated-files.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-own-target-headers.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-all-target-headers.hmap -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-project-headers.hmap -F/Users/chris/Projects/Mac/Cioccolata/build/Debug -I/Users/chris/Projects/Mac/Cioccolata/build/Debug/include -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources/i386 -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources -include /var/folders/Xy/Xy-bvnxtFpiYBQPED0dK1++++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/Cioccolata_Prefix-dololiigmwjzkgenggebqtpvbauu/Cioccolata_Prefix.pch -c /Users/chris/Projects/Mac/Cioccolata/CWHelloWorld.m -o /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Objects-normal/i386/CWHelloWorld.o Ld /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Cioccolata normal i386 cd /Users/chris/Projects/Mac/Cioccolata setenv MACOSX_DEPLOYMENT_TARGET 10.5 /Developer/usr/bin/gcc-4.2 -arch i386 -dynamiclib -isysroot /Developer/SDKs/MacOSX10.5.sdk -L/Users/chris/Projects/Mac/Cioccolata/build/Debug -F/Users/chris/Projects/Mac/Cioccolata/build/Debug -filelist /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Objects-normal/i386/Cioccolata.LinkFileList -install_name @executable_path/../Frameworks/Cioccolata.framework/Versions/A/Cioccolata -mmacosx-version-min=10.5 -framework Foundation -single_module -compatibility_version 1 -current_version 1 -o /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Cioccolata Touch /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework cd /Users/chris/Projects/Mac/Cioccolata /usr/bin/touch -c /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework Build CioccolataTest of project CioccolataTest with configuration Debug ProcessInfoPlistFile /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Info.plist Info.plist cd /Users/chris/Projects/Mac/CioccolataTest builtin-infoPlistUtility Info.plist -expandbuildsettings -platform macosx -o /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Info.plist PBXCp build/Debug/CioccolataTest.webapp/Contents/Frameworks/Cioccolata.framework /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework cd /Users/chris/Projects/Mac/CioccolataTest /Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Frameworks CopyStringsFile /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Resources/English.lproj/InfoPlist.strings English.lproj/InfoPlist.strings cd /Users/chris/Projects/Mac/CioccolataTest setenv ICONV /usr/bin/iconv /Developer/Library/Xcode/Plug-ins/CoreBuildTasks.xcplugin/Contents/Resources/copystrings --validate --inputencoding utf-8 --outputencoding UTF-16 English.lproj/InfoPlist.strings --outdir /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Resources/English.lproj CompileC build/CioccolataTest.build/Debug/CioccolataTest.build/Objects-normal/i386/main.o main.m normal i386 objective-c com.apple.compilers.gcc.4_2 cd /Users/chris/Projects/Mac/CioccolataTest setenv LANG en_US.US-ASCII /Developer/usr/bin/gcc-4.2 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=gnu99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -isysroot /Developer/SDKs/MacOSX10.5.sdk -mfix-and-continue -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-generated-files.hmap -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-own-target-headers.hmap -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-all-target-headers.hmap -iquote /Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-project-headers.hmap -F/Users/chris/Projects/Mac/CioccolataTest/build/Debug -I/Users/chris/Projects/Mac/CioccolataTest/build/Debug/include -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/DerivedSources/i386 -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/DerivedSources -include /Users/chris/Projects/Mac/CioccolataTest/prefix.pch -c /Users/chris/Projects/Mac/CioccolataTest/main.m -o /Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/Objects-normal/i386/main.o In file included from <command-line>:0: /Users/chris/Projects/Mac/CioccolataTest/prefix.pch:13:35: error: Cioccolata/Cioccolata.h: No such file or directory /Users/chris/Projects/Mac/CioccolataTest/main.m: In function 'main': /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: 'CWHelloWorld' undeclared (first use in this function) /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: (Each undeclared identifier is reported only once /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: for each function it appears in.) /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: 'hello' undeclared (first use in this function)

    Read the article

  • Python: nonblocking read from stdout of threaded subprocess

    - by sberry2A
    I have a script (worker.py) that prints unbuffered output in the form... 1 2 3 . . . n where n is some constant number of iterations a loop in this script will make. In another script (service_controller.py) I start a number of threads, each of which starts a subprocess using subprocess.Popen(stdout=subprocess.PIPE, ...); Now, in my main thread (service_controller.py) I want to read the output of each thread's worker.py subprocess and use it to calculate an estimate for the time remaining till completion. I have all of the logic working that reads the stdout from worker.py and determines the last printed number. The problem is that I can not figure out how to do this in a non-blocking way. If I read a constant bufsize then each read will end up waiting for the same data from each of the workers. I have tried numerous ways including using fcntl, select + os.read, etc. What is my best option here? I can post my source if needed, but I figured the explanation describes the problem well enough. Thanks for any help here. EDIT Adding sample code I have a worker that starts a subprocess. class WorkerThread(threading.Thread): def __init__(self): self.completed = 0 self.process = None self.lock = threading.RLock() threading.Thread.__init__(self) def run(self): cmd = ["/path/to/script", "arg1", "arg2"] self.process = subprocess.Popen(cmd, stdout=subprocess.PIPE, bufsize=1, shell=False) #flags = fcntl.fcntl(self.process.stdout, fcntl.F_GETFL) #fcntl.fcntl(self.process.stdout.fileno(), fcntl.F_SETFL, flags | os.O_NONBLOCK) def get_completed(self): self.lock.acquire(); fd = select.select([self.process.stdout.fileno()], [], [], 5)[0] if fd: self.data += os.read(fd, 1) try: self.completed = int(self.data.split("\n")[-2]) except IndexError: pass self.lock.release() return self.completed I then have a ThreadManager. class ThreadManager(): def __init__(self): self.pool = [] self.running = [] self.lock = threading.Lock() def clean_pool(self, pool): for worker in [x for x in pool is not x.isAlive()]: worker.join() pool.remove(worker) del worker return pool def run(self, concurrent=5): while len(self.running) + len(self.pool) > 0: self.clean_pool(self.running) n = min(max(concurrent - len(self.running), 0), len(self.pool)) if n > 0: for worker in self.pool[0:n]: worker.start() self.running.extend(self.pool[0:n]) del self.pool[0:n] time.sleep(.01) for worker in self.running + self.pool: worker.join() and some code to run it. threadManager = ThreadManager() for i in xrange(0, 5): threadManager.pool.append(WorkerThread()) threadManager.run() I have stripped out a log of the other code in hopes to try to pinpoint the issue.

    Read the article

  • Fedora 12 Wireless problems (Intel Wireless 4965AGN Card)

    - by Ninefingers
    Hi All, I'm having an interesting experience with my wireless card at the moment. Basically, it does like this: I connect to the local wireless network (netgear router) It works, briefly, allowing me to browse a webpage or maybe two, if I'm lucky. It then stops working / sending any packets, whilst reported still connected. Now, me being me I've had a look to see what I can find. wpa_supplicant.log looks like this: Trying to associate with valid_mac:a2:30 (SSID='vennardwireless' freq=2462 MHz) Associated with valid_mac:a2:30 WPA: Key negotiation completed with valid_mac:a2:30 [PTK=CCMP GTK=TKIP] CTRL-EVENT-CONNECTED - Connection to valid_mac:a2:30 completed (reauth) [id=0 id_str=] CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys So that's working fine. dmesg | grep "*iwl*" spits out this: iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:b2:32:a3:30 tid = 0 iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:b2:32:a3:30 tid = 0 So that's working too. I can also ping 192.168.0.1 -I wlan0 and arping 192.168.0.1 -I wlan0 the router until the network falls over. uname -r:2.6.32.10-90.fc12.x86_64. Laptop is a Core2 Duo (2Ghz) with 3GB RAM. Other symptoms I've noticed are that wireshark freezes when I capture on the "broken" interface until I disconnect. Am using networkmanager as per normal. Stupidly, I can connect to the same router via eth0/a cat6 cable just fine. Everyone else can connect to the AP fine (from Windows). Yes, I'm sat right next to it and not trying to access a hotspot the other side of the world. Any ideas? Is this a broken update? (I intend to reboot and test an older kernel later)? Anyone else come across this? Edit: iwconfig wlan0 rate auto is the settings I'm using for rates. Also, according to networkmanager the network is still connected. Thanks for any pointers / advice.

    Read the article

  • How to secure JBoss application server using SELinux

    - by Jakub Elias
    I want to secure RedHat 5.4 application server by SELinux (targeted policy) and have several questions 1, where can i get SELinux sources (/etc/selinux//src/policy/)There seems to be no such package on install cd .. 2, how to restrict user rights (for example user jboss could not modify /etc/my.cnf) 3, how to configure JBoss application server to work under SELinux Although i read many documents from NSA the whole topic is still not clear for me.What i want is to basically protect filesystem in case one account is broken.I cannot find any materials about securing jboss server using either chroot jail, ACLs or SELinux ....

    Read the article

  • Wacom Bamboo Model MTE-450 Drawing while hovering

    - by Brook
    My pen will draw without the pen actually touching the tablet. I HAVE SEEN THE OTHER QUESTION about this, but it did NOT answer my question. I have uninstalled re-installed the driver 4 times, I have updated it every time, and my tablet/pen IS NEW. THEY ARE NOT/DO NOT HAVE BUTTONS THAT ARE BROKEN. If anyone can give me an answer besides "Get a new one", please tell me.

    Read the article

  • MSSQL: How to copy a file (pdf, doc, txt...) stored in a varbinary(max) field to a file in a CLR sto

    - by user193655
    I ask this question as a followup of this question. A solution that uses bcp and xp_cmdshell, that is not my desired solution, has been posted here: stackoverflow.com/questions/828749/ms-sql-server-2005-write-varbinary-to-file-system (sorry i cannot post a second hyperlink since my reputation is les than 10). I am new to c# (since I am a Delphi developer) anyway I was able to create a simple CLR stored procedures by following a tutorial. My task is to move a file from the client file system to the server file system (the server can be accessed using remote IP, so I cannot use a shared folder as destination, this is why I need a CLR stored procedure). So I plan to: 1) store from Delphi the file in a varbinary(max) column of a temporary table 2) call the CLR stored procedure to create a file at the desired path using the data contained in the varbinary(max) field Imagine I need to move C:\MyFile.pdf to Z:\MyFile.pdf, where C: is a harddrive on local system and Z: is an harddrive on the server. I provide the code below (not working) that someone can modify to make it work? Here I suppose to have a table called MyTable with two fields: ID (int) and DATA (varbinary(max)). Please note it doesn't make a difference if the table is a real temporary table or just a table where I temporarly store the data. I would appreciate if some exception handling code is there (so that I can manage an "impossible to save file" exception). I would like to be able to write a new file or overwrite the file if already existing. [Microsoft.SqlServer.Server.SqlProcedure] public static void VarbinaryToFile(int TableId) { using (SqlConnection connection = new SqlConnection("context connection=true")) { connection.Open(); SqlCommand command = new SqlCommand("select data from mytable where ID = @TableId", connection); command.Parameters.AddWithValue("@TableId", TableId); // This was the sample code I found to run a query //SqlContext.Pipe.ExecuteAndSend(command); // instead I need something like this (THIS IS META_SYNTAX!!!): SqlContext.Pipe.ResultAsStream.SaveToFile('z:\MyFile.pdf'); } } (one subquestion is: is this approach coorect or there is a way to directly pass the data to the CLR stored procedure so I don't need to use a temp table?) If the subquestion's answer is No, could you describe the approach of avoiding a temp table? So is there a better way then the one I describe above (=temp table + Stored procedure)? A way to directly pass the dataastream from the client application to the CLR stored procedure? (my files can be any size but also very big)

    Read the article

  • Where can I find this hotfix?

    - by speeder
    I've got a problem, and seemly the solution is a hot fix mentioned here. The problem is that the link there pointing to location of the hotfix is broken, leading to a search page on MS site. And looking around I figured that the easiest way is to phone Microsoft, but I live in other country. So, how I fix the problem described in the KB page that I linked? EDIT: Extra note: I DO have the SP3... :(

    Read the article

  • Kde no sound from Phonon or most KDE apps but mplayer,skype and firefox are ok

    - by zeonglow
    Can somebody tell me why I cannot get any sound with most of KDE 4? I'm running a Gentoo box, I'm in both the 'audio' and 'video' groups. I can get sound with mplayer ( but not smplayer ) Firefox and Skype but nothing else. I can't get the test sound to play from the settings window, but Phonon is not whining about broken sound cards when I start up. I have checked with kmix, we seem to be completely unmuted ( and I can get sound with some apps)

    Read the article

  • how to suppress output in R

    - by Derek
    Hi, I would like to suppress output in R when I run my r script from the command prompt. I tried numerous options including "--slave" and "--vanilla". Those options lessens the amount of text outputted. I also tried to pipe the output to "NUL" but that didn't help. Thanks a lot, Derek

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >