david hunter - Page 52 - Developer IT

Windows 7 not booting after failed SRT (SSD caching) install

- by david

This is a fairly new computer, only about a month old. i7 2700k, z68 motherboard, with a 1.5tb WD black HD, and a 128gb crucial M4 ssd. I followed the instructions for setting up ssd caching, the SATA controller was set to RAID, I installed the intel software and enabled acceleration and it said everything went fine. But when I went to reboot, I received the lovely "Reboot and Select proper Boot device" error message. I checked the bios, and it was booting from the correct HD (I tried the only other option anyway just in case, it was the ~50 odd gb of unformatted space left on the SSD) AFter that I entered the raid until (ctrl-i at boot) and removed the acceleration and deleted the raid array (because it was being used as a cache this was non destructive) Still no boot. So I reinstalled win7 directly on the SSD, booted, and checked the HDD to make sure it hadn't been wiped. It hadn't, all the files were still there, including all the windows stuff. I backed up my data to an external drive just in case, but I'd really like to get this install booting again. I trawled the webs a bit, and have tried entering recovery mode and using the bootrec.exe and bootsect.exe to fix it, but to be honest I'm not sure what I'm doing with those. My question is basically: How do I make my harddrive bootable again?

Read the article

What is the difference between the Client and GTK versions of emacs?

- by David

My Ubuntu 10.04 desktop has three versions of emacs: emacs-snapshot (client) emacs-snapshot (GTK) GNU Emacs 23 I mostly use emacs-snapshot, but I also use regular emacs in terminal mode emacs -nw. However, it is not clear to me what the difference is between the client and GTK versions of emacs-snapshot is, which one is launched by emacs-snapshot at the terminal, and if I should uninstall one or just ignore it.

Read the article

How can I connect a wired PC to the internet through my Macs wifi connection?

- by David Weitz

So I'll probably be buying a USB wifi adapater if I can't get this to work, but I'm trying. I have a wireless router at home and my Macbook Pro is connected to said wifi. My desktop doesn't have a wifi connection, but I've connected my macbook with my desktop via crossover cable. I enabled internet sharing on my macbook, but my Windows 7 desktop can't get a connection. I tried just regular file sharing and that works fine, but the internet sharing doesn't. I assume the goal is to get my PC to see my mac as the default gateway, but I've had no luck manually setting it. Here's the ifconfig output on my mac and my attempt at settings on windows: http://i.imgur.com/uJfUz.png

Read the article

How do I escape spaces in command line in Windows without using quotation marks?

- by David

For example what is the alternative to this command without quotation marks: CD "c:\Documents and Settings" The full reason I don't want to use quotation marks is that this command DOES work: SVN add mypathname\*.* but this command DOES NOT work : SVN add "mypathname\*.*" The problem being when I change mypathname for a path with spaces in it I need to quote the whole thing. For example: SVN add "c:\Documents and Settings\username\svn\*.*" But when I try this I get the following error message: svn: warning: 'c:\Documents and Settings\username\svn\*.*' not found

Read the article

PHP product recommendations

- by David

I'm building up an online store written in PHP. I was wondering if anyone has any suggestions for open source (or otherwise) product recommendation plugins? Ideally I'd like something that stores all its information locally on my server, and can provide good recommendations of products based on previous purchases and clicks. Any hints appreciated!

Read the article

How does the Cloud compare to Colocation? And development too

- by David

Currently I/we run a SaaS web application where each subscriber has their own physical instance of the application in addition to their own database. The setup has each web application instance deployed on two different IIS boxes both for load-balancing and redundancy (the machines have their Windows Update install times 12 hours apart, for example). Databases are mirrored on two different SQL Server 2012 machines with AlwaysOn for uptime. I don't make use of SQL Server clustering (as it doesn't provide storage-level failover: we don't have a shared storage box). Because it's a Windows setup it means there are two Domain Controllers (we cheat: they're both Mac Minis, 17W each, which keeps our colo power costs low). Finally there's also an Exchange server (Mailbox, Hub Transport and Client Access). One of the SQL Servers also doubles-up as an Exchange Hub Transport. Running costs are about $700 a month for our quarter-rack colocation (which includes power and peering/transfer), then there's about $150 a month for SPLA licensing, so $850 a month in total. Then there's the hard-to-quantify cost of administration, but I reckon I spend a couple of hours a week checking-in on the servers: reviewing event logs, etc. I keep getting bombarded by ads and manufactured news stories about how great "the cloud" is. Back in 2008 when the cloud was taking off I was reading up about the proper "cloud" services like Google AppEngine, where you write in Python against Google's API and that's how they scale your application across servers and also use their database provider for scaling storage. Simple enough to understand. Then came along Amazon, and I understand how Amazon Storage works, but I'm not sure how Amazon Compute works: web application pages don't take much CPU time to compute, how do you even quantify usage anyway? Finally, RackSpace gets in the act and now I'm really confused. RackSpace advertise "Cloud" SQL Server 2012 available for about "$0.70 per hour", going by how they advertise it I thought the "hour" meant the sum of CPU time, IO blocking time, maybe time spent transferring data, so for a low-intensity application that works out pretty cheap then? Nope. I went on to a Sales Chat window and spoke to one of their advisors. They told me the $0.70/hour was actually for every hour the SQL Server is running... but who wants a SQL Server for only a few hours? You're going to need it available 24 hours a day for months on end. $0.70 * 24 * 31 works out at $520 a month, which is rediculously expensive for SQL Server. An SPLA license for SQL Server is only $50 a month or so. That $520 a month does not include "fanatical support", and you also need to stack on top the costs of the host Windows server instance too. From what I can tell, Rackspace's "Cloud" products seem like like an cynical rebranding of an overpriced VPS service, but priced by the hour. I have the same confusion about Windows Azure which uses similar terms to describe the products available, but I think that's because Azure offers both traditional shared webhosting in addition to their own APIs you can target for scalable applications.

Read the article

Hyper-V Server Management from Windows 8.1

- by David Mackintosh

Is there a way to manage a Hyper-V cluster that runs on a Windows Server 2008 R2 Datacenter from a Windows 8.1 Pro workstation? I've downloaded and installed the Remote Server Admin Tools for 8.1 (http://www.microsoft.com/en-us/download/details.aspx?id=39296), but when I enable the Hyper-V manager, it tells me that I can't manage Hyper-V servers on 2K8 or 2K8R2. Related, the Failover Cluster Manager barfs with a similar error. How do I manage my old servers with my new workstation?

Read the article

Limiting to the ServerName in Apache2

- by David

I have 2 sites defined in my Apache2. Each one has a servername. For example: Server 1 (first in sites-enabled) responds to www.example.com Server 2 (second in sites-enabled) responds to www.example2.com Ok, the problem is when I type the server IP in the URL, the first server responds. How could I limit the response to only specifying its servername? I would like to block the IP calls. If that is not possible, I would like the second server to respond, not the first. I cannot change the order because there are aliases defined in the second server that would override the first server config.

Read the article

Sync Dropbox remotely

- by David

I have Dropbox on my Ubuntu desktop, and I am working remotely on my laptop. I would like to add files from my desktop to Dropbox and then access them on my laptop. So, I did the following: ssh tomydesktop ln -s myfile.txt ~/Dropbox/ and then when I ls ~/Dropbox myfile.txt shows up However, myfile.txt does not show up either on the Dropbox website version of the folder or on my laptop. Do I need to somehow "sync" the Dropbox folder from the desktop? I do not see any sync options on my laptop or on the website.

Read the article

My images look desaturated and brighter on the iPhone than on my Mac (in PS, Pixelmator & Finder)

- by david

I save my image in Photoshop (No Color management). I put it on the iPhone and it looks brighter and desaturated. Also my blue-green looks more like blue. I have tried some color profiles on the net: http://luminous-landscape.com/forum/index.php?showtopic=38121 http://www.colorwiki.com/wiki/Color_on_iPhone But the images still look different. I'm going insane with this because its stealing my time away and i can't fix it. Every bit of help would be appreciated! Do I have to create my own profile? Is there an easy way??

Read the article

nginx rewrite for an url with parameters

- by David

I have an URL of this type: http://www.example.com/?param1=val1&param2=&param3=val3&param4=val4&param5=val5 And I want to redirect it to this one: http://www.example.com/newparam/val3/val4 So I have tried this rewrite rule with no success: rewrite "/?param1=val1&param2=&param3=(.+)&param4=(.+)&param5=(.+)" http://www.example.com/newparam/$1/$2 redirect; Is nginx not able to deal with query parameters? EDIT: I don't want to rewrite all petitions. I only need to rewrite that URL, without affecting the others.

Read the article

When Typing on my mac the cursor moves/deletes/replaces text.

- by David

Help! I don't know what is happening, with my computer (Macbook Black OSX 1ha0.6.6) but recently whenever I am typing my cursor suddenly moves in the middle of my frase or paragraph, deleting text, replacing words or just closing applications. I don't know what might be the cause but it's driving me crazy. I have disabled typinator (which had worked fine for a couple of months) and looked through the keybindings in SystemPreferencesKeyboardKeyboard Shortcuts. But for have not been able to find any answers. It happens in all apps that require typing. Textmate, Chrome, FIrefox, Texedit, Mail. Does anybody know if there is a way I can review all keyboard shortcuts, to see if the issue lies there or any suggestions? Thanking you dearly Dave

Read the article

Database server size

- by David

I received a recommendation from my hosting provider noting that a general rule in production server management is to ensure that the memory on your database server is larger than the size of your total database. Our database is 1800mb (and growing) and we're being told to purchase a 2GB server. This didn't sit right with me, but I'm not an expert in production server management. We're running a MySQL db with mostly InnoDB tables and some MyISAMs. Thanks!

Read the article

OS X Leopard (10.5) Server -- Unwanted Emails

- by David

Our OS X Leopard (10.5) server is sending out an email EVERY DAY for a Disk Full Notification on an external HDD we use for Time Machine backups (which manages it's own disk space, so the disk full notifications are useless). In the Server Admin app, under Settings Notifications, there's this: which is clearly disabled. The email header and message: http://pastebin.com/V5PZ3Phk I've been told to check the mail.log, but it's mostly empty (except for a few logs in 2011 saying "Postfix mail system is not running". I've also been told to check the crontabs, but I'm not sure how to do that on OS X (or any OS for that matter). Can someone explain how to do this? Also, if there's any other suggestions on places/things/etc to look at/for, my ears are all open!

Read the article

Change shortcut in Firefox for "next tab" with "F3" ?

- by David

Hello, I know that CTRL + PgUp/PgDn will switch to next or previous tab in Firefox. But I would much prefer to use F2/F3 for the same purpose (ala old Maxthon behaviour). Is it possible ? Thanks in advance ;)

Read the article

What is wrong with my home network? (Routing and connection issues)

- by David

I have a corporate laptop that was provided to me by a client and I'm having some rather odd difficulties with it when I put the laptop on my home network. When I first brought the machine home it behaved like any other laptop. Once it was connected to the network it was assigned an IP address and I could remote into it just fine using the machine name. Lately though, whenever I put this laptop on my network I am not able to ping or RDP into the machine as the host name doesn't properly resolve. Additionally I'm able to see the device and it's assigned IP address clearly in my router firmware. This gets even more strange as now when I try to ping it's IP address listed in my router, I see that it's actually trying to ping my own machine (screenshot of this very odd event below). This has actually driven me crazy to the point that I have actually replaced my router (it was behaving oddly in other ways), and I'm continuing to have these problems. The above ping capture is from the new router. As far as network goes I am now currently using an NetGear R7000 Nighthawk and I haven't customized any of the networking settings in the router just yet (installed yesterday). I would appreciate any advice possible and would be happy to provide further diagnostic information. Networking isn't my strong suit, so I'm not even sure where to begin unraveling this thing.

Read the article

Odd SQL Results

- by Ryan Burnham

So i have the following query Select id, [First], [Last] , [Business] as contactbusiness, (Case When ([Business] != '' or [Business] is not null) Then [Business] Else 'No Phone Number' END) from contacts The results look like id First Last contactbusiness (No column name) 2 John Smith 3 Sarah Jane 0411 111 222 0411 111 222 6 John Smith 0411 111 111 0411 111 111 8 NULL No Phone Number 11 Ryan B 08 9999 9999 08 9999 9999 14 David F NULL No Phone Number I'd expect record 2 to also show No Phone Number If i change the "[Business] is not null" to [Business] != null then i get the correct results id First Last contactbusiness (No column name) 2 John Smith No Phone Number 3 Sarah Jane 0411 111 222 0411 111 222 6 John Smith 0411 111 111 0411 111 111 8 NULL No Phone Number 11 Ryan B 08 9999 9999 08 9999 9999 14 David F NULL No Phone Number Normally you need to use is not null rather than != null. whats going on here?

Read the article

PHP - XML Feed get print values

- by danit

Here is my feed: <entry> <id>http://api.visitmix.com/OData.svc/Sessions(guid'816995df-b09a-447a-9391-019512f643a0')</id> <title type="text">Building Web Applications with Microsoft SQL Azure</title> <summary type="text">SQL Azure provides a highly available and scalable relational database engine in the cloud. In this demo-intensive and interactive session, learn how to quickly build web applications with SQL Azure Databases and familiar web technologies. We demonstrate how you can quickly provision, build and populate a new SQL Azure database directly from your web browser. Also, see firsthand several new enhancements we are adding to SQL Azure based on the feedback we’ve received from the community since launching the service earlier this year.</summary> <published>2010-01-25T00:00:00-05:00</published> <updated>2010-03-05T01:07:05-05:00</updated> <author> <name /> </author> <link rel="edit" title="Session" href="Sessions(guid'816995df-b09a-447a-9391-019512f643a0')" /> <link rel="http://schemas.microsoft.com/ado/2007/08/dataservices/related/Speakers" type="application/atom+xml;type=feed" title="Speakers" href="Sessions(guid'816995df-b09a-447a-9391-019512f643a0')/Speakers"> <m:inline> <feed> <title type="text">Speakers</title> <id>http://api.visitmix.com/OData.svc/Sessions(guid'816995df-b09a-447a-9391-019512f643a0')/Speakers</id> <updated>2010-03-25T11:56:06Z</updated> <link rel="self" title="Speakers" href="Sessions(guid'816995df-b09a-447a-9391-019512f643a0')/Speakers" /> <entry> <id>http://api.visitmix.com/OData.svc/Speakers(guid'3395ee85-d994-423c-a726-76b60a896d2a')</id> <title type="text">David-Robinson</title> <summary type="text"></summary> <updated>2010-03-25T11:56:06Z</updated> <author> <name>David Robinson</name> </author> <link rel="edit-media" title="Speaker" href="Speakers(guid'3395ee85-d994-423c-a726-76b60a896d2a')/$value" /> <link rel="edit" title="Speaker" href="Speakers(guid'3395ee85-d994-423c-a726-76b60a896d2a')" /> <link rel="http://schemas.microsoft.com/ado/2007/08/dataservices/related/Sessions" type="application/atom+xml;type=feed" title="Sessions" href="Speakers(guid'3395ee85-d994-423c-a726-76b60a896d2a')/Sessions" /> <category term="EventModel.Speaker" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme" /> <content type="image/jpeg" src="http://live.visitmix.com/Content/images/speakers/lrg/default.jpg" /> <m:properties xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices"> <d:SpeakerID m:type="Edm.Guid">3395ee85-d994-423c-a726-76b60a896d2a</d:SpeakerID> <d:SpeakerFirstName>David</d:SpeakerFirstName> <d:SpeakerLastName>Robinson</d:SpeakerLastName> <d:LargeImage m:null="true"></d:LargeImage> <d:SmallImage m:null="true"></d:SmallImage> <d:Twitter m:null="true"></d:Twitter> </m:properties> </entry> </feed> </m:inline> </link> <link rel="http://schemas.microsoft.com/ado/2007/08/dataservices/related/Tags" type="application/atom+xml;type=feed" title="Tags" href="Sessions(guid'816995df-b09a-447a-9391-019512f643a0')/Tags" /> <link rel="http://schemas.microsoft.com/ado/2007/08/dataservices/related/Files" type="application/atom+xml;type=feed" title="Files" href="Sessions(guid'816995df-b09a-447a-9391-019512f643a0')/Files" /> <category term="EventModel.Session" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme" /> <content type="application/xml"> <m:properties> <d:SessionID m:type="Edm.Guid">816995df-b09a-447a-9391-019512f643a0</d:SessionID> <d:Location>Breakers L</d:Location> <d:Type>Seminar</d:Type> <d:Code>SVC07</d:Code> <d:StartTime m:type="Edm.DateTime">2010-03-17T12:00:00</d:StartTime> <d:EndTime m:type="Edm.DateTime">2010-03-17T13:00:00</d:EndTime> <d:Slug>SVC07</d:Slug> <d:CreatedDate m:type="Edm.DateTime">2010-01-26T18:14:24.687</d:CreatedDate> <d:SourceID m:type="Edm.Guid">cddca9b7-6830-4d06-af93-5fd87afb67b0</d:SourceID> </m:properties> </content> </entry> I want to print the: Session Title (Building Web Applications with Microsoft SQL Azure) The Author (David Robinson) The Location (Breakers L) And display the speakers image (http://live.visitmix.com/Content/images/speakers/lrg/default.jpg) I presume I can use filegetcontents and then transform to simplexmlstring, but I dont know how to get the deeper items in I want, like Author, and image. Any chance of a bit of coding genius here?

Read the article

Recursive TreeView in ASP.NET

- by waqasahmed

I have an object of type list from which I wish to use to populate a treeview in asp.net c#. Each object item has: id | Name | ParentId so for example: id | Name | ParentId ------------------------- 1 | Alice | 0 2 | Bob | 1 3 | Charlie | 1 4 | David | 2 In the above example, the parent would be Alice having two children Bob and Charlie. David is the child of Bob. I have had many problems trying to dynamically populate the treeview recursively in c# ASP.NET Does any one have a simple solution? Btw: you can use People.Id, People.Name and People.ParentId to access the members since it is an object belonging to list. I can post you my code so far (many attempts made) but not sure how useful it will be.

Read the article

Recursive TreeView in C# ASP.NET

- by waqasahmed

I have an object of type list from which I wish to use to populate a treeview in asp.net c#. Each object item has: id | Name | ParentId so for example: id | Name | ParentId 1 | Alice | 0 2 | Bob | 1 3 | Charlie | 1 4 | David | 2 In the above example, the parent would be Alice having two children Bob and Charlie. David is the child of Bob. I have had many problems trying to dynamically populate the treeview recursively in c# ASP.NET Does any one have a simple solution? Btw: you can use People.Id, People.Name and People.ParentId to access the members since it is an object belonging to list. I can post you my code so far (many attempts made) but not sure how useful it will be.

Read the article

SQL Count Query with Grouping by multiple Columns

- by Christian

Read the article

SQL Count Query with Grouping by multiple Rows

- by Christian

Read the article

How to compare the output of serializeArray using qunit

- by dorelal

I am using qunit and jquery. Latest version of both. In my code when I submit the form I have the event as e. I call e.serializeArray() Here is my test. equals(args.data, [ { "name": "user_name", "value": "john" } ], 'input data'); And this is the error message from qunit. expected: [ { "name": "user_name", "value": "david" } ] result: [ { "name": "user_name", "value": "david" } ] As you can see to the naked eye the expected and result value is same but qunit is not liking it. I guess I am missing something.

Read the article

how to add a entry to tables with relationships?

- by siulamvictor

I have 2 models, Users & Accounts. They are in one-to-many relationship, i.e. each accounts have many users. Accounts company_id company_name company_website Users user_id user_name password company_id email How can I add these entries to database using ActiveRecord? Supposed I don't is the company existed in the database when I add a new entry. Name Email Password Company ----------------------------------------------------------------------------- Albert [email protected] 123456 ABC Company Betty [email protected] 234567 ABC Company Carmen [email protected] 765432 XXX Company David [email protected] 654321 ABC Company

Read the article

Converting a list into a select with jquery

- by Davemof

I'm trying to convert the following list into a select list so it can be submitted via a form - the element within the lists will become the value of each option: <ul class="selected connected-list ui-sortable" style="height: 279px;"> <li class="ui-helper-hidden-accessible" style=""></li> <li title="Owner Name 1 - " class="ui-state-default ui-element ui-draggable" style="display: block; position: relative; top: 0px; left: 0px;"><span class="ui-icon-arrowthick-2-n-s ui-icon"></span>Owner Name 1 - <em class="thenumber">4.4796E+11</em><a class="action" href="#"><span class="ui-corner-all ui-icon ui-icon-minus"></span></a></li> <li title="David Moffat - " class="ui-state-default ui-element" style="display: block; position: relative; top: 0px; left: 0px;"><span class="ui-icon ui-icon-arrowthick-2-n-s"></span>David Moffat - <em class="thenumber">07730423005</em><a class="action" href="#"><span class="ui-corner-all ui-icon ui-icon-minus"></span></a></li> </ul> This should convert to the following format: <select style="display:none" class="selectoption" name="p_num[]" multiple="multiple"> <option value="">4.4796E+11</option> <option value="">07730423007</option> </select> I have tried the following jquery code, but after many hours I'm pulling my hair out: $('a.sendform').click(function(){ $('ul.selected').each(function() { var $select = $('<select />'); $(this).find('li').each(function() { var $option = $('<option />'); $option.attr('value', $(this).('em')).html($(this).html()); $select.append($option); }); $(this).replaceWith($select); }); }); Any help might save my remaining hair. Many thanks David

Search Results

Search found 3264 results on 131 pages for 'david hunter'.

Page 52/131 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59 | Next Page >

- by david

- by David

- by David Weitz

- by David

- by David

- by David

- by David Mackintosh

- by David

- by David

- by david

- by David

- by David

- by David

- by David

- by David

- by David

- by Ryan Burnham

- by danit

- by waqasahmed

- by waqasahmed

- by Christian

- by Christian

- by dorelal

- by siulamvictor

- by Davemof

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59 | Next Page >