Search Results

Search found 2253 results on 91 pages for 'grep'.

Page 52/91 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • How to properly create a startup script for tracd on Synology DS209+II?

    - by Daren Thomas
    I'm running tracd on a Synology DS209+II NAS. For that purpose, I have created a script in /opt/etc/init.d called S81trac: myserver> ls -l /opt/etc/init.d -rwxr-xr-x 1 root root 127 May 19 09:56 S80apache -rwxr-xr-x 1 root root 122 Jun 10 10:17 S81trac This file has following contents: #!/bin/sh # run tracd /opt/bin/tracd -p 8888 -auth=*,/volume1/svn/svn-auth-file,mydomain -e /volume1/trac-env And this actually works, except, the NAS never really finishes booting: The blue light keeps flashing. Also, reboot doesn't work anymore (it hangs) and I have to use killall init to reboot the machine. I have tried running tracd in the background, by appending & to the last line of S81trac. After rebooting, the blue light stops flashing. But ps | grep tracd is empty and I can't connect to the trac instance from my PC. I guess I'm doing something wrong here, but what?

    Read the article

  • zip being too nice (Mac OS X)

    - by stib
    I use zip to do a regular backup of a local directory onto a remote machine. They don't believe in things like rsync here, so it's the best I can do (?). Here's the script I use echo $(date)>>~/backuplog.txt; if [[ -e /Volumes/backup/ ]]; then cd /Volumes/Non-RAID_Storage/; for file in projects/*; do nice -n 10 zip -vru9 /Volumes/backup/nonRaidStorage.backup.zip "$file" 2>&1 | grep -v "zip info: local extra (21 bytes)">>~/backuplog.txt; done; else echo "backup volume not mounted">>~/backuplog.txt; fi This all works fine, except that zip never uses much CPU, so it seems to be taking longer than it should. It never seems to get above 5%. I tried making it nice -20 but that didn't make any difference. Is it just the network or disc speeds bottlenecking the process or am I doing something wrong?

    Read the article

  • Unmount Mass Storage USB Device from the Command Line in Linux

    - by Casey
    I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output: $ dmesg | grep sd [20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0 [20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error: $ gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') *** What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed. Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command.

    Read the article

  • squid running out of sockets

    - by drscroogemcduck
    I have a setup where squid sits in front of a java server and acts as a reverse proxy. Recently i've load tested the site and if i fire 100 threads at it each making a request using jmeter i start getting errors in my load test tool like 'no route to host' even though the load test tool and the server are on the same machine. if i run the following command where port 82 is the port my squid server is running on: netstat -ann | grep 82 | wc -l i get 22000 or something and most of them are in TIMED_WAIT. i'm thinking that maybe the huge number of sockets in the TIMED_WAIT state are starving the box of resources.

    Read the article

  • apache2 slow responding (debian)

    - by baloo
    I'm running an apache2 2.2.9 webserver with modpython and mpm_worker_module. The current config for the mpm is ServerLimit 32 StartServers 10 MaxClients 800 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 The server has 1G of ram and a 100Mbit connection. Checking netstat -na | grep ESTABLISHED | wc -l gives me a number between 50 - 60. The load is about 1.0 Every pageload is also cached by memcached. I can't see why the server is so slow in responding to new connections, sometimes droping them completely? Also tried disabling iptables to make sure it's not because of a full state table or something like that. The only thing in dmesg is a lot of spam about "TCP: Treason uncloaked!"

    Read the article

  • Centos 6 vsftp server

    - by henry
    I have installed vsftpd server in my centos 6 server. I created three users.first user can access the ftp server using his system password.All the users are in chroot_list. when the second user is trying to access through ftp with his password, one error message as follows: "operation not supported " my server's selinux configuration: [henry@admin ~]$ getsebool -a | grep ftp allow_ftpd_anon_write --> off allow_ftpd_full_access --> off allow_ftpd_use_cifs --> off allow_ftpd_use_nfs --> off ftp_home_dir --> on ftpd_connect_db --> off httpd_enable_ftp_server --> off sftpd_anon_write --> off sftpd_enable_homedirs --> off sftpd_full_access --> off sftpd_write_ssh_home --> off tftp_anon_write --> off How can I troubleshoot this issue?

    Read the article

  • Server not sending a SYN/ACK packet in response to a SYN packet

    - by jeff
    Using iptraf, tcpdump and wireshark I can see a SYN packet coming in but only the ACK FLAG is set in reply packet. I'm running Debian 5 with kernel 2.6.36 I've turned off window_scaling and tcp_timestamps, tcp_tw_recycle and tcp_tw_reuse: cat /etc/sysctl.conf net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_window_scaling = 0 net.ipv4.tcp_timestamps = 0 I've attached an image of the wireshark output. http://imgur.com/pECG0.png Output to netstat netstat -natu | grep '72.23.130.104' tcp 0 0 97.107.134.212:18000 72.23.130.104:42905 SYN_RECV I've been doing everything possible to find a solution and have yet to figure out the problem, so any help/suggestions are much appreciated. UPDATE 1: I've set tcp_syncookies = 0 and noticed I am now replying with 1 SYN+ACK for every 50 SYN requests. The host trying to connect is sending a SYN request about once every second. PCAP FILE

    Read the article

  • Can't install Parallels Tools on Debian 7.2.0

    - by jfm429
    (Parallels Desktop 9, latest version) As per instructions, I switch to root: $ su - root $ whoami root $ echo $EUID 0 and then execute the installer: $ cd /media/cdrom0 $ ./install and I get this error: sudo: unable to execute ./install: Permission denied What? I'm root! What's with this? I double check to make sure the execute bit is set: $ ls -lA | grep install$ -r-xr-xr-x 1 root root 17284 Oct 25 09:22 install Yep. People online are saying that you need to drag the install script to the terminal after typing sudo. So I do that, and this command is what's formed: $ sudo '/media/cdrom0/install' sudo: unable to execute /media/cdrom0/install: Permission denied What's the solution here?

    Read the article

  • How to load tun module in linux?

    - by rabipelais
    I cannot manage to load the tun module in my archlinux box. I'm trying to connect with openvpn, but the log says nm-openvpn[6662]: Note: Cannot open TUN/TAP dev /dev/net/tun: No such device (errno=19) lsmod | grep tun returns nothing. If I run sudo modprobe tun it returns failure, but no error message, and lsmod still has no tun. The module seems to exist, as there is a tun.ko.gz in /lib/modules/....... I really dont know what else to try. Thanks in advance

    Read the article

  • After logging out of SSH, screen sessions disappear on Arch Linux

    - by Ivan
    On Arch Linux (I'm on a single dedicated server, where my domain name points to only one IP), when I SSH into a user (say, for example, user mc), and then do screen -S test (or -dmS, the resulting issue is the same), run a command, and then detach from it, then exit out of my SSH session, and log back in, the screen session disappears. screen -ls returns No Sockets found in /run/screens/S-mc. The only way I can reattach to my sessions is if I never logged out of my SSH. How do I fix this? I do have read/write access in /run/screens/S-mc I detach from screen sessions with Ctrl-A,D disown -a && exit gives me the same problem shopt huponexit returns "huponexit off" There is no ~/.logout, and ~/.bash_logout is empty, with 3 lines of comments, telling me it's the ~/.bash_logout file ls -l /usr/bin | grep screen returns lrwxrwxrwx 1 root root 12 Oct 31 2012 screen -> screen-4.0.3 -rwsr-xr-x 1 root root 363672 Oct 31 2012 screen-4.0.3

    Read the article

  • Dovecot ignoring maximum number of IMAP connections

    - by Michelle
    I have a single mailbox mail server running Dovecot/Postfix and I have two IMAP clients, Thunderbird on the PC and K9 on Android. I keep on receiving this error in my logs even after I change the 'mail_max_userip_connections' variable to 50. puppet dovecot: imap-login: Maximum number of connections from user+IP exceeded (mail_max_userip_connections=10): user=<[email protected]>, method=PLAIN, rip=62.242.90.2, lip=198.29.31.229, TLS Why does it say that it is set to 10 in the log? Is that hardcoded? grep -r "mail_max_userip_connections" /etc/dovecot /etc/dovecot/conf.d/20-managesieve.conf: #mail_max_userip_connections = 10 /etc/dovecot/conf.d/20-pop3.conf: #mail_max_userip_connections = 3 /etc/dovecot/conf.d/20-imap.conf: mail_max_userip_connections = 50 I've restarted dovecot after making the changes but this error is still logged and I can't access the mailbox. Can anyone help me understand why I can't seem to raise the maximum limit?

    Read the article

  • aptitude: list all previous recommended packages

    - by casper
    sometimes when installing a package, aptitude recommends several other packages. Is there a way to show all previous recommended packages of all installed packages? Thanks in advance. Casper Edit: Thanks for the replys so far. I already tried: aptitude show ~i | grep '^Recommends' | cut -d ' ' -f 2- Thats mostly ok. But it gives also things back like: console-setup | console-data (>= 2002.12.04dbs-1) I want an easy way, to install all missing recommended packages. So aptitude install console-setup | console-data (>= 2002.12.04dbs-1) won't work ;-) Is there a way, without manual checking all entries, to do this?

    Read the article

  • why my server has a dir named "?"

    - by liuxingruo
    These are all the dirs in my server: ? bin boot dev etc home lib lost+found media media2 misc mnt net opt proc root sbin selinux srv sys tmp usr var why there is a "?" dir? Thanks very much. BTW: the touch command was found on my server(wiered). I list the bin dir: alsacard cp dd env hostname loadkeys more ps sed tcptraceroute alsaunmute cpio df ex igawk loadkeys.static mount pwd setfont traceroute6 arch csh dmesg false ipcalc logger mountpoint raw setserial tracert awk cut dnsdomainname fgrep kbd_mode login mv red sh view basename date doexec gawk keyctl ls netstat redhat_lsb_init sleep ypdomainname bash dbus-cleanup-sockets domainname gettext kill mail nice rm sort cat dbus-daemon dumpkeys grep ksh mailx nisdomainname rmdir stty chgrp dbus-monitor echo gtar ksh93 mkdir pgawk rpm su chmod dbus-send ed gunzip link mknod ping rvi sync chown dbus-uuidgen egrep gzip ln mktemp ping6 rview tar touch is missing, how can i get it back?

    Read the article

  • What is the fastest way to reload history commands begin with certain characters in linux?

    - by gerry
    In Dos we can input the first several characters to filter command history and find proper one rapidly. But how to do the same thing in Linux ? for example when I am testing a local server: cd sudo /etc/init.d/vsftpd start wget ... ls emacs ... sudo /etc/init.d/vsftpd restart sudo /etc/init.d/vsftpd stop ... In Dos you can easily type sudo and switch among the three commands beginning with it using arrow keys. But in Linux, is below command the best we can do ? historty | grep sudo I don't like it, because history can easily become a mess, and it also need mouse action.

    Read the article

  • How can I access the external microphone with Ubuntu?

    - by Charles Merriam
    Sound in Ubuntu, it has its own special joy. I would like my external microphone to work. Symptoms: I can play sound through the speakers I can play sound through the headsets. Plugging and and plugging headphone output correctly switches. I can record from the built-in microphone, using "Sound Recorder" and others. but: I cannot record from the external microphone. My Sound Preferences/Input panel has no option for an external microphone. If the answer is upgrade the ALSA drivers, please say exactly what to type. Thank you. ======== I'm using Ubuntu 9.10 Karmic Koala on a laptop (Gateway W3501), Sigmatel. That is: ~$ head -1 /proc/asound/card0/code* ==> /proc/asound/card0/codec#0 <== Codec: SigmaTel STAC9205 ==> /proc/asound/card0/codec#1 <== Codec: Conexant ID 2c06 ~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

    Read the article

  • CentOS: eth0 not starting on boot

    - by Cameron Aziz
    Whenever I reboot a CentOS Hyper-V VM, eth0 does not start automatically. All I need to do is perform ifup eth0 and all is fixed, but that isn't feasible from ssh! I am starting in runlevel 3. After I perform ifup eth0 on the console: [root@localhost ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:5D:2B:2B:07 inet addr:10.10.0.3 Bcast:10.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe2b:2b07/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4656 (4.5 KiB) TX bytes:6399 (6.2 KiB) Interrupt:9 Base address:0xa000 [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=10.10.0.3 NETMASK=255.255.255.0 GATEWAY=10.10.0.1 USERCTL=no ONBOOT=yes [root@localhost ~]# chkconfig --list | grep network network 0:off 1:off 2:on 3:on 4:on 5:on 6:off

    Read the article

  • Fingerprint of PEM ssh key

    - by Unknown
    I have a PEM file which I add to a running ssh-agent: $ file query.pem query.pem: PEM RSA private key $ ssh-add ./query.pem Identity added: ./query.pem (./query.pem) $ ssh-add -l | grep query 2048 ef:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX ./query.pem (RSA) My question is how I can get the key fingerprint I see in ssh-agent directly from the file. I know ssh-keygen -l -f some_key works for "normal" ssh keys, but not for PEM files. If I try ssh-keygen on the .pem file, I get: $ ssh-keygen -l -f ./query.pem key_read: uudecode PRIVATE KEY----- failed key_read: uudecode PRIVATE KEY----- failed ./query.pem is not a public key file. This key starts with: -----BEGIN RSA PRIVATE KEY----- MIIEp.... etc. as opposed to a "regular" private key, which looks like: -----BEGIN RSA PRIVATE KEY----- Proc-Type: 4,ENCRYPTED DEK-Info: AES-128-CBC,E15F2.... etc.

    Read the article

  • Finding text in Ubuntu (gnome) terminal output

    - by Rickson
    Imagine this scenario: You run a command at gnome terminal. This command has made a bunch of outputs to the terminal. After some time, you realize you need the value of a variable (let's say variable_needed) that was printed by the command somewhere in the terminal. How to find it? KDE terminal used to have a shortcut ctrl+shift+f which searched the terminal output. It seems that gnome-terminal doesn't have it (at least at Ubuntu 10.04.2 LTS). Is there any way of adding it? Is there any other good terminal I could use that has it? Notice that the output has already been written so I don't want (cannot) run the command again combined with grep, |, , vim, emacs, etc.

    Read the article

  • sshd running but no PID file

    - by dunxd
    I'm recently started using monit to monitor the status of sshd on my CentOS 5.4 server. This works fine, but every so often monit reports that sshd is no longer running. This isn't true - I am still able to login to the server via ssh, however I note the following: There is no longer any PID file at /var/run/sshd.pid - after a reboot this file exists. Once it is gone, restarting sshd via service sshd restart does not create the PID file. sudo service sshd status reports openssh-daemon is stopped - again, restarting sshd does not change this, but a reboot does. sudo service sshd stop reports failed, presumably because of the missing PID file. Any idea what is going on? Update sudo netstat -lptun gives the following output relating to port 22 tcp 0 0 :::22 :::* LISTEN 20735/sshd Killing the process with this PID as suggested by @Henry and then starting sshd via service results in service sshd status recognising the process by PID again. Would still like to understand this better. RPM verify suggested by a couple of answerers shows this: sudo rpm -vV openssh openssh-server openssh-clients | grep 'S\.5' S.5....T c /etc/pam.d/sshd S.5....T c /etc/ssh/sshd_config /etc/pam.d/sshd has the following contents: #%PAM-1.0 auth include system-auth account required pam_nologin.so account include system-auth password include system-auth session optional pam_keyinit.so force revoke session include system-auth #session required pam_loginuid.so Should that last line be commented out? Update Here's the output of @YannickGirouard 's script: $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 21330 Command line for PID 21330: /usr/sbin/sshd Listing process(es) relating to PID 21330: UID PID PPID C STIME TTY TIME CMD root 21330 1 0 14:04 ? 00:00:00 /usr/sbin/sshd Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ However, I've since got things working by killing the process and starting afresh, as suggested by @Henry below, so perhaps I am no longer seeing the same thing. Will try again if I am seeing the issue again after next reboot. Update - 14 March Monit alerted me that sshd had disappeared, and again I am able to ssh onto the server. So now I can run the script $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 2208 Command line for PID 2208: /usr/sbin/sshd Listing process(es) relating to PID 2208: UID PID PPID C STIME TTY TIME CMD root 2208 1 0 Mar13 ? 00:00:00 /usr/sbin/sshd root 1885 2208 0 21:50 ? 00:00:00 sshd: dunx [priv] Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ Again, when I look for /var/run/sshd.pid I don't find it. $ cat /var/run/sshd.pid cat: /var/run/sshd.pid: No such file or directory $ sudo netstat -anp | grep sshd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2208/sshd $ sudo kill 2208 $ sudo service sshd start Starting sshd: [ OK ] $ cat /var/run/sshd.pid 3794 $ sudo service sshd status openssh-daemon (pid 3794) is running... Is it possible that sshd is restarting and not creating a pidfile for some reason?

    Read the article

  • How can I make my monitor run at it's native resolution under Kubuntu 9.10?

    - by Adam Matan
    Hi, I have installed Kubuntu 9.10 afresh on an HP desktop computer with a Samsung SyncMaster 2243 and Intel integrated graphics card. The screen resolution is fixed on 1280x1024 instead of the native 1680x1050, which makes my eyes bleed. $ lspci -k |grep "VGA" -A2 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) Kernel driver in use: i915 Kernel modules: i915 and my xorg.conf: /etc/X11$ cat xorg.conf Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Any ideas how to make this driver work? I found no working solutions on Google searches. Thanks, Adam

    Read the article

  • How do I install php-gd?

    - by user42577
    I've done phpinfo() to see if it was installed but I see no mention of the gd libraries anywhere. I ran this command (rpm -qa | grep php) and this is what I see: php-gd-4.3.9-3.18.1.swsoft php-mysql-4.3.9-3.18.1.swsoft php-pgsql-4.3.9-3.18.1.swsoft php-4.3.9-3.18.1.swsoft php-domxml-4.3.9-3.18.1.swsoft php-imap-4.3.9-3.18.1.swsoft php-mbstring-4.3.9-3.18.1.swsoft php-ncurses-4.3.9-3.18.1.swsoft php-pear-4.3.9-3.18.1.swsoft php-snmp-4.3.9-3.18.1.swsoft php-devel-4.3.9-3.18.1.swsoft php-ldap-4.3.9-3.18.1.swsoft php-odbc-4.3.9-3.18.1.swsoft php-xmlrpc-4.3.9-3.18.1.swsoft My server is a linux box with php5 installed. I also tried to run yum install php5-gd to no avail.What else should I do or check to get it installed?

    Read the article

  • My control key doesn't work, how do I fix it??

    - by Blaine LaFreniere
    My control key on the right doesn't work how it should. E.g. Right ctrl + T won't open new tabs in firefox, right ctrl + w won't switch windows in vim, etc. I know the key isn't physically broken, because xev shows that the right ctrl key generates events, but it just isn't responding as I expect it to in applications. Screenshot: http://i46.tinypic.com/33w1h76.png I tried Kim's answer but it still doesn't work. blaine@blaine-laptop ~ $ xmodmap -pke | grep 105 keycode 105 = Control_R Control_R Control_R Control_R Control_R Tried to map as Control_L as well, didn't work. The computer is a laptop, I am unable to plug the keyboard in to another computer.

    Read the article

  • How to disconnect a running bash job from the shell in Linux?

    - by raven
    I have a script that starts a server on a remote VM. All works great until I close the shell where I executed the script. When the shell closes, so does the server. After some looking around I found the following: & will send the job to the background when executed with the symbol disown -h will disconnect the job from the shell and allow it to run regardless of the shell. The command I used is: ./startServer.sh nasb_wxscat160_catalog-4.1.6 1.0.8 > catalog-log.txt & disown -h When I closed the shell and checked using ps -ef | grep java to see if the job is still working I did see it in the list. However when I tried to connect to the server it was unresponsive. On deeper inspection, the log file was filled just until I closed the shell and using the ps -m flag I say the process jobs were not working. Has any one encountered some thing of this sort?

    Read the article

  • nginx: php-fastcgi running but php files not executing

    - by Daniel
    I have recently set up a nginx server with PHP running as FastCGI process. The server is running with HTML files however PHP files are downloading instead of displaying and PHP code is not processed. This is what I have in nginx.conf: server { listen 80; server_name pubserver; location ~ \.php$ { root /usr/share/nginx/html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; include fastcgi_params; } } The command netstat -tulpn | grep :9000 displays the following which indicates php-fastcgi is running and listening on port 9000: tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 2663/php-cgi If it's if any importance my server is running on CentOS 6 and I installed nginx and PHP using the repositories from The Fedora Project.

    Read the article

  • Recover data from a corrupted virtualbox vmdk file?

    - by Neth
    The power went out while I was doing a build on a VirtualBox machine, when I restarted the vmdk for the disk the vm was using was corrupted, apparently irrecoverably. I have been able to grep the 66GB vmdk file and it finds strings from the code I was working on that hadn't gotten in to subversion yet (yeah, yeah I know). But the strings are either in the shell history or what look to be strings inside object files. Any ideas for finding/recovering the source code? If it helps the vm was Linux, Fedora Core 10 on an ext3 filesystem. The host is an ubuntu 10.04_amd64 and has an ext4 filesystem.

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >