Search Results

Search found 6200 results on 248 pages for 'lib'.

Page 52/248 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • No GLX on Intel card with multiseat with additional nVidia card

    - by MeanEYE
    I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

    Read the article

  • Ubuntu 12.04 wireless (wifi) not working, can not upgrade to 12.10, touchpad gestures not working. What to do?

    - by Ritwik
    I installed ubuntu 12.04 LTS 3 days ago and since then wireless feature and touchpad gestures are not working. Tried everything on internet but still unsuccessful. I cant upgrade to ubuntu 12.10. These are the following comments I tried. Please help me. EDIT: just realized usb 3.0 is also not working. COMMAND lsb_release -r OUTPUT ----------------------------------------------------------------- Release: 12.04 ----------------------------------------------------------------- COMMAND lspci OUTPUT ------------------------------------------------------------------ 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) 00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5) 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 07:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) 0f:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) ------------------------------------------------------------------ COMMAND sudo apt-get install linux-backports-modules-wireless-lucid-generic OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-backports-modules-wireless-lucid-generic ------------------------------------------------------------------- COMMAND cat /etc/lsb-release; uname -a OUTPUT ------------------------------------------------------------------- DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.5 LTS" Linux ritwik-PC 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------------- COMMAND lspci -nnk | grep -iA2 net OUTPUT ------------------------------------------------------------------- 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07) Subsystem: Hewlett-Packard Company Device [103c:225d] Kernel driver in use: r8169 -- 0f:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:217f] ------------------------------------------------------------------- COMMAND lsusb OUTPUT ------------------------------------------------------------------- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 002 Device 002: ID 8087:8000 Intel Corp. ------------------------------------------------------------------- COMMAND iwconfig OUTPUT ------------------------------------------------------------------- lo no wireless extensions. eth0 no wireless extensions. ------------------------------------------------------------------- COMMAND rfkill list all OUTPUT ------------------------------------------------------------------- 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no ------------------------------------------------------------------- COMMAND lsmod OUTPUT ------------------------------------------------------------------- Module Size Used by snd_hda_codec_realtek 224215 1 bnep 18281 2 rfcomm 47604 0 bluetooth 180113 10 bnep,rfcomm parport_pc 32866 0 ppdev 17113 0 nls_iso8859_1 12713 1 nls_cp437 16991 1 vfat 17585 1 fat 61512 1 vfat snd_hda_intel 33719 3 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event nouveau 775039 0 joydev 17693 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq ttm 76949 1 nouveau uvcvideo 72627 0 snd 79041 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videodev 98259 1 uvcvideo drm_kms_helper 46978 1 nouveau psmouse 98051 0 drm 241971 3 nouveau,ttm,drm_kms_helper i2c_algo_bit 13423 1 nouveau soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm v4l2_compat_ioctl32 17128 1 videodev hp_wmi 18092 0 serio_raw 13211 0 sparse_keymap 13890 1 hp_wmi mxm_wmi 13021 1 nouveau video 19651 1 nouveau wmi 19256 2 hp_wmi,mxm_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62190 0 ------------------------------------------------------------------- COMMAND sudo su modprobe -v ath9k OUTPUT ------------------------------------------------------------------- insmod /lib/modules/3.2.0-67-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko insmod /lib/modules/3.2.0-67-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko ------------------------------------------------------------------- COMMAND do-release-upgrade OUTPUT ------------------------------------------------------------------- Err Upgrade tool signature 404 Not Found [IP: 91.189.88.149 80] Err Upgrade tool 404 Not Found [IP: 91.189.88.149 80] Fetched 0 B in 0s (0 B/s) WARNING:root:file 'quantal.tar.gz.gpg' missing Failed to fetch Fetching the upgrade failed. There may be a network problem. ------------------------------------------------------------------- COMMAND sudo modprobe ath9k dmesg | grep ath9k NO OUTPUT FOR THEM COMMAND dmesg | grep -e ath -e 80211 OUTPUT ------------------------------------------------------------------- [ 13.232372] type=1400 audit(1408867538.399:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=975 comm="apparmor_parser" [ 13.232615] type=1400 audit(1408867538.399:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=975 comm="apparmor_parser" [ 15.186599] ath3k: probe of 3-4:1.0 failed with error -110 [ 15.186635] usbcore: registered new interface driver ath3k [ 88.219329] cfg80211: Calling CRDA to update world regulatory domain [ 88.351665] cfg80211: World regulatory domain updated: [ 88.351667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 88.351670] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351671] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351674] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351675] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ------------------------------------------------------------------- COMMAND sudo apt-get install touchpad-indicator OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: gir1.2-gconf-2.0 python-pyudev Suggested packages: python-qt4 python-pyside.qtcore The following NEW packages will be installed: gir1.2-gconf-2.0 python-pyudev touchpad-indicator 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 84.1 kB of archives. After this operation, 1,136 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://ppa.launchpad.net/atareao/atareao/ubuntu/ precise/main touchpad-indicator all 0.9.3.12-1ubuntu1 [46.5 kB] Get:2 http://archive.ubuntu.com/ubuntu/ precise/main gir1.2-gconf-2.0 amd64 3.2.5-0ubuntu2 [7,098 B] Get:3 http://archive.ubuntu.com/ubuntu/ precise/main python-pyudev all 0.13-1 [30.5 kB] Fetched 84.1 kB in 2s (31.6 kB/s) Selecting previously unselected package gir1.2-gconf-2.0. (Reading database ... 169322 files and directories currently installed.) Unpacking gir1.2-gconf-2.0 (from .../gir1.2-gconf-2.0_3.2.5-0ubuntu2_amd64.deb) ... Selecting previously unselected package python-pyudev. Unpacking python-pyudev (from .../python-pyudev_0.13-1_all.deb) ... Selecting previously unselected package touchpad-indicator. Unpacking touchpad-indicator (from .../touchpad-indicator_0.9.3.12-1ubuntu1_all.deb) ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Processing triggers for software-center ... INFO:softwarecenter.db.update:no translation information in database needed Setting up gir1.2-gconf-2.0 (3.2.5-0ubuntu2) ... Setting up python-pyudev (0.13-1) ... Setting up touchpad-indicator (0.9.3.12-1ubuntu1) ... ------------------------------------------------------------------- Not able to find ( drivers/net/wireless/ath/ath9k/hw.c ) or ( drivers/net/wireless/ath/ath9k/hw.h )

    Read the article

  • Deploying Django on EC2 using Bitnami Djangostack: WSGI script cannot be loadded

    - by Arman
    I've been struggling to deploy Django application on Amazon EC2 using Bitnami Djangostack for the last couple of days. When I go to http://dewey.io I see the default bitnami page (/opt/bitnami/apache2/htdocs/index.html), however, when I open http://dewey.io/portnoy, I get 'Internal Server Error'. But it's known that if mod_wsgi is setup correctly, the DocumentRoot value from httpd.conf is ignored, thus, I should see my Django application when accessing http://dewey.io. Essentially, the main error is this - 'Target WSGI script cannot be loaded as Python module'. Two questions: 1) any ideas how to fix these mod_wsgi errors (the Apache logs are below)? 2) how to disable the default /opt/bitnami/apache2/htdocs/index.html page and show my homepage from django application when accessing http://dewey.io? Thank you in advance! The details On my EC2 instance I"m running 64-bit Ubuntu 12.04 with DjangoStack 1.4-1. My Django project is located here - /opt/bitnami/apps/django/django_projects/portnoy. root@dewey:/opt/bitnami/apps/django/django_projects/portnoy# ls manage.py README.md settings.py site_media users Procfile sandbox static test.py topics urls.py views.py __init__.pyc templates testviews.py Apache error logs (/opt/bitnami/apache2/logs/error_log): [Wed Jul 04 02:29:00 2012] [error] [client 140.180.6.212] File does not exist: /opt/bitnami/apache2/htdocs/favicon.ico [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] mod_wsgi (pid=3990): Target WSGI script '/opt/bitnami/apps/django/scripts/django.wsgi' cannot be loaded as Python module. [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] mod_wsgi (pid=3990): Exception occurred processing WSGI script '/opt/bitnami/apps/django/scripts/django.wsgi'. [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] Traceback (most recent call last): [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/scripts/django.wsgi", line 8, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] import django.core.handlers.wsgi [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/core/handlers/wsgi.py", line 8, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from django import http [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/http/__init__.py", line 119, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from django.http.multipartparser import MultiPartParser [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/http/multipartparser.py", line 13, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from django.utils.text import unescape_entities [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/utils/text.py", line 4, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from gzip import GzipFile [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/python/lib/python2.7/gzip.py", line 10, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] import io [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/python/lib/python2.7/io.py", line 60, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] import _io [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] ImportError: /opt/bitnami/python/lib/python2.7/lib-dynload/_io.so: undefined symbol: PyUnicodeUCS2_AsEncodedString [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File does not exist: /opt/bitnami/apache2/htdocs/favicon.ico [Wed Jul 04 02:44:00 2012] [error] [client 140.180.6.212] File does not exist: /opt/bitnami/apache2/htdocs/favicon.ico Let me quickly introduce the contents of the files to make the case more concrete. This is my /etc/apache2/sites-available/default file <VirtualHost *:80> ServerAdmin [email protected] ServerName dewey.io Alias /site_media/ /opt/bitnami/apps/django/django_projects/portnoy/site_media/ Alias /static/ /opt/bitnami/apps/django/lib/python2.7/site-packages/django/contrib/admin/static/ Alias /robots.txt /opt/bitnami/apps/django/django_projects/portnoy/site_media/robots.txt Alias /favicon.ico /opt/bitnami/apps/django/django_projects/portnoy/site_media/favicon.ico CustomLog "|/usr/sbin/rotatelogs /opt/bitnami/apps/django/django_projects/logs/access.log.%Y%m%d-%H%M%S 5M" combined ErrorLog "|/usr/sbin/rotatelogs /opt/bitnami/apps/django/django_projects/logs/error.log.%Y%m%d-%H%M%S 5M" LogLevel warn WSGIProcessGroup dewey.io WSGIScriptAlias / /opt/bitnami/apps/django/scripts/django.wsgi <Directory /opt/bitnami/apps/django/django_projects/portnoy/site_media> Order deny,allow Allow from all Options -Indexes FollowSymLinks </Directory> <Directory /opt/bitnami/apps/django/django_projects/portnoy/conf/apache> Order deny,allow Allow from all </Directory> </VirtualHost> This is my /opt/bitnami/apps/django/scripts/django.wsgi file import os, sys sys.path.append('/opt/bitnami/apps/django/lib/python2.7/site-packages/') sys.path.append('/opt/bitnami/apps/django/django_projects') sys.path.append('/opt/bitnami/apps/django/django_projects/portnoy') os.environ['DJANGO_SETTINGS_MODULE'] = 'portnoy.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() Here is the relevant portion of /opt/bitnami/apache2/conf/httpd.conf file: ServerRoot "/opt/bitnami/apache2" Listen 80 ServerName dewey.io DocumentRoot "/opt/bitnami/apache2/htdocs" LoadModule wsgi_module modules/mod_wsgi.so WSGIPythonHome /opt/bitnami/python Include "/opt/bitnami/apache2/conf/ssi.conf" Include "/opt/bitnami/apps/django/conf/django.conf" Include "/opt/bitnami/apache2/conf/bitnami/httpd.conf"

    Read the article

  • Illustration of buffer overflows for students (linux, C)

    - by osgx
    Hello My friend is teacher of first-year CS students. We want to show them buffer overflow exploitation. But modern distribs are protected from simples buffer overflows: HOME=`perl -e "print 'A'x269"` one_widely_used_utility_is_here --help on debian (blame it) Caught signal 11, on modern commercial redhat *** buffer overflow detected ***: /usr/bin/one_widely_used_utility_is_here terminated ======= Backtrace: ========= /lib/libc.so.6(__chk_fail+0x41)[0xc321c1] /lib/libc.so.6(__strcpy_chk+0x43)[0xc315e3] /usr/bin/one_widely_used_utility_is_here[0x805xxxc] /usr/bin/one_widely_used_utility_is_here[0x804xxxc] /lib/libc.so.6(__libc_start_main+0xdc)[0xb61e9c] /usr/bin/one_widely_used_utility_is_here[0x804xxx1] ======= Memory map: ======== 00336000-00341000 r-xp 00000000 08:02 2751047 /lib/libgcc_s-4.1.2-20080825.so.1 00341000-00342000 rwxp 0000a000 08:02 2751047 /lib/libgcc_s-4.1.2-20080825.so.1 008f3000-008f4000 r-xp 008f3000 00:00 0 [vdso] The same detector fails for more synthetic examples from the internet. How can we demonstrate buffer overflow with modern non-GPL distribs (there is no debian in classes) How can we DISABLE canary word checking in stack ? DISABLE checking variants of strcpy/strcat ? write an example (in plain C) with working buffer overrun ?

    Read the article

  • Java Classpath Problems in Ubuntu

    - by Travis
    First off I'm running Ubuntu 9.10 I've edited the /etc/environment file to look like this: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" JAVA_HOME="/usr/lib/jvm/java-6-sun-1.6.0.20" CLASSPATH="/home/travis/freetts/lib/freetts.jar:/home/travis/freetts/lib/jsapi.jar:." I then run "source /etc/environment" to make sure the changes are included. Then I try compiling my simple test program using this: javac Test.java It throws out a few errors, but when I compile like this: javac -cp /home/travis/freetts/lib/freetts.jar:/home/travis/freetts/lib/jsapi.jar:. Test.java It works just fine, this leads me to believe that for some reason javac isn't seeing the CLASSPATH environment variable? I can echo it and everything in the terminal: echo $CLASSPATH gives me what I put in. Any help on this would be greatly appreciated.

    Read the article

  • Retrieve Gmail using Ruby

    - by Kartik Rao
    I need to retrieve emails from my Gmail account using Ruby on Rails. I'm currently using this piece of code, but it gives me a timeout error everytime. require 'net/pop' pop = Net::POP3.new 'mail.isp.com' pop.start '[email protected]', 'password' if pop.mails.empty? puts "No mail." else puts "You have #{pop.mails.length} new messages." puts "Downloading..." pop.mails.each_with_index do|m,i| File.open( "inbox/#{i}", 'w+' ) do|f| f.write m.pop end m.delete end end This is the error I recieve /usr/lib/ruby/1.8/timeout.rb:60:in `new': execution expired (Timeout::Error) from /usr/lib/ruby/1.8/net/protocol.rb:206:in `old_open' from /usr/lib/ruby/1.8/net/protocol.rb:206:in `old_open' from /usr/lib/ruby/1.8/net/pop.rb:438:in `do_start' from /usr/lib/ruby/1.8/net/pop.rb:432:in `start' from script/mail.rb:4 Any help will be appreciated!

    Read the article

  • Slow boot on Ubuntu 12.04

    - by Hailwood
    My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

    Read the article

  • How to extend the Smarty class right

    - by Evolutio
    I have a Problem with Smarty. I have made this class: <?php require_once(INCLUDE_PATH.'smarty/Smarty.class.php'); class IndexPage extends Smarty { public $templateName = 'index.tpl'; public function __construct() { parent::__construct(); $this->showTemplate(); } public function showTemplate() { self::display('index.tpl'); } } ?> But why it doesn't works? Here is the Error: Fatal error: Uncaught exception 'SmartyException' with message 'Unable to load template file 'index.tpl'' in D:\xampp\htdocs\aiondb\lib\smarty\sysplugins\smarty_internal_templatebase.php:127 Stack trace: #0 D:\xampp\htdocs\aiondb\lib\smarty\sysplugins\smarty_internal_templatebase.php(374): Smarty_Internal_TemplateBase->fetch('index.tpl', NULL, NULL, NULL, true) #1 D:\xampp\htdocs\aiondb\lib\classes\IndexPage.class.php(14): Smarty_Internal_TemplateBase->display('index.tpl') #2 D:\xampp\htdocs\aiondb\lib\classes\IndexPage.class.php(10): IndexPage->showTemplate() #3 D:\xampp\htdocs\aiondb\index.php(3): IndexPage->__construct() #4 {main} thrown in D:\xampp\htdocs\aiondb\lib\smarty\sysplugins\smarty_internal_templatebase.php on line 127

    Read the article

  • TextMate can't find my RSpec gem in opt (from macports)

    - by sbwoodside
    I know I've had this problem before so I'm really frustrated. I've got the Ruby RSpec bundle installed for TextMate, but when I Run Behaviour Description or Run Focused Example I get this wonderful error: /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygems.rb:827: in `report_activate_error': Could not find RubyGem rspec (>= 1.1.0) (Gem::LoadError) from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygems.rb:261: in `activate' from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby /1.8/rubygems.rb:68:in `gem' from /Users/simon/Library/Application Support/TextMate/Bundles/Ruby RSpec.tmbundle/Support/lib/spec_mate.rb:13 from /tmp/temp_textmate.oWRPUR:3:in `require' from /tmp/temp_textmate.oWRPUR:3 (I added linebreaks to make it readable) I'm using macports so my rspec gem is installed in /opt/local/lib/ruby/gems/1.8/gems/. Why isn't it finding it? In Preferences Advanced Shell Variables my TM_RUBY is set to /opt/local/bin/ruby. I also tried the trick here: http://dnite.org/2007/8/28/textmate-and-your-environment-variables/ ... which didn't do anything.

    Read the article

  • can't activate rack problem while install spree commerce

    - by art
    I install spree version 0.9.4 with gem install spree and run a set up command spree mystore and get this errors messages. Have anybody experienced this whether in spree or not ? D:\Workspaces>spree mystore C:/Program Files/BitNami RubyStack/ruby/lib/ruby/site_ruby/1.8/rubygems.rb:280:i n `activate': can't activate rack (>= 1.0.1, runtime) for ["spree-0.9.4"], alrea dy activated rack-1.0.0 for ["actionpack-2.3.5", "rails-2.3.5", "spree-0.9.4"] ( Gem::LoadError) from C:/Program Files/BitNami RubyStack/ruby/lib/ruby/site_ruby/1.8/ruby gems.rb:296:in `activate' from C:/Program Files/BitNami RubyStack/ruby/lib/ruby/site_ruby/1.8/ruby gems.rb:295:in `each' from C:/Program Files/BitNami RubyStack/ruby/lib/ruby/site_ruby/1.8/ruby gems.rb:295:in `activate' from C:/Program Files/BitNami RubyStack/ruby/lib/ruby/site_ruby/1.8/ruby gems.rb:68:in `gem' from C:/Program Files/BitNami RubyStack/ruby/bin/spree:18 Thanks

    Read the article

  • Fetching email using Ruby on Rails

    - by Shreyas Satish
    I need to fetch email from my gmail account using RoR. require 'net/pop' Net::POP3.start('pop.gmail.com', 995, username, password) do |pop| if pop.mails.empty? puts 'No mail.' else #pop.each_mail do |mail| #p mail.header #p mail.pop puts "Mails present" #end end end I get a timeout error. usr/lib/ruby/1.8/timeout.rb:60:in new': execution expired (Timeout::Error) from /usr/lib/ruby/1.8/net/protocol.rb:206:inold_open' from /usr/lib/ruby/1.8/net/protocol.rb:206:in old_open' from /usr/lib/ruby/1.8/net/pop.rb:438:indo_start' from /usr/lib/ruby/1.8/net/pop.rb:432:in `start' from script/mail.rb:4 Thanks and Cheers !

    Read the article

  • How to merge two different Makefiles?

    - by martijnn2008
    I have did some reading on "Merging Makefiles", one suggest I should leave the two Makefiles separate in different folders [1]. For me this look counter intuitive, because I have the following situation: I have 3 source files (main.cpp flexibility.cpp constraints.cpp) one of them (flexibility.cpp) is making use of the COIN-OR Linear Programming library (Clp) When installing this library on my computer it makes sample Makefiles, which I have adjust the Makefile and it currently makes a good working binary. # Copyright (C) 2006 International Business Machines and others. # All Rights Reserved. # This file is distributed under the Eclipse Public License. # $Id: Makefile.in 726 2006-04-17 04:16:00Z andreasw $ ########################################################################## # You can modify this example makefile to fit for your own program. # # Usually, you only need to change the five CHANGEME entries below. # ########################################################################## # To compile other examples, either changed the following line, or # add the argument DRIVER=problem_name to make DRIVER = main # CHANGEME: This should be the name of your executable EXE = clp # CHANGEME: Here is the name of all object files corresponding to the source # code that you wrote in order to define the problem statement OBJS = $(DRIVER).o constraints.o flexibility.o # CHANGEME: Additional libraries ADDLIBS = # CHANGEME: Additional flags for compilation (e.g., include flags) ADDINCFLAGS = # CHANGEME: Directory to the sources for the (example) problem definition # files SRCDIR = . ########################################################################## # Usually, you don't have to change anything below. Note that if you # # change certain compiler options, you might have to recompile the # # COIN package. # ########################################################################## COIN_HAS_PKGCONFIG = TRUE COIN_CXX_IS_CL = #TRUE COIN_HAS_SAMPLE = TRUE COIN_HAS_NETLIB = #TRUE # C++ Compiler command CXX = g++ # C++ Compiler options CXXFLAGS = -O3 -pipe -DNDEBUG -pedantic-errors -Wparentheses -Wreturn-type -Wcast-qual -Wall -Wpointer-arith -Wwrite-strings -Wconversion -Wno-unknown-pragmas -Wno-long-long -DCLP_BUILD # additional C++ Compiler options for linking CXXLINKFLAGS = -Wl,--rpath -Wl,/home/martijn/Downloads/COIN/coin-Clp/lib # C Compiler command CC = gcc # C Compiler options CFLAGS = -O3 -pipe -DNDEBUG -pedantic-errors -Wimplicit -Wparentheses -Wsequence-point -Wreturn-type -Wcast-qual -Wall -Wno-unknown-pragmas -Wno-long-long -DCLP_BUILD # Sample data directory ifeq ($(COIN_HAS_SAMPLE), TRUE) ifeq ($(COIN_HAS_PKGCONFIG), TRUE) CXXFLAGS += -DSAMPLEDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatasample`\" CFLAGS += -DSAMPLEDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatasample`\" else CXXFLAGS += -DSAMPLEDIR=\"\" CFLAGS += -DSAMPLEDIR=\"\" endif endif # Netlib data directory ifeq ($(COIN_HAS_NETLIB), TRUE) ifeq ($(COIN_HAS_PKGCONFIG), TRUE) CXXFLAGS += -DNETLIBDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatanetlib`\" CFLAGS += -DNETLIBDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatanetlib`\" else CXXFLAGS += -DNETLIBDIR=\"\" CFLAGS += -DNETLIBDIR=\"\" endif endif # Include directories (we use the CYGPATH_W variables to allow compilation with Windows compilers) ifeq ($(COIN_HAS_PKGCONFIG), TRUE) INCL = `PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --cflags clp` else INCL = endif INCL += $(ADDINCFLAGS) # Linker flags ifeq ($(COIN_HAS_PKGCONFIG), TRUE) LIBS = `PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --libs clp` else ifeq ($(COIN_CXX_IS_CL), TRUE) LIBS = -link -libpath:`$(CYGPATH_W) /home/martijn/Downloads/COIN/coin-Clp/lib` libClp.lib else LIBS = -L/home/martijn/Downloads/COIN/coin-Clp/lib -lClp endif endif # The following is necessary under cygwin, if native compilers are used CYGPATH_W = echo # Here we list all possible generated objects or executables to delete them CLEANFILES = clp \ main.o \ flexibility.o \ constraints.o \ all: $(EXE) .SUFFIXES: .cpp .c .o .obj $(EXE): $(OBJS) bla=;\ for file in $(OBJS); do bla="$$bla `$(CYGPATH_W) $$file`"; done; \ $(CXX) $(CXXLINKFLAGS) $(CXXFLAGS) -o $@ $$bla $(LIBS) $(ADDLIBS) clean: rm -rf $(CLEANFILES) .cpp.o: $(CXX) $(CXXFLAGS) $(INCL) -c -o $@ `test -f '$<' || echo '$(SRCDIR)/'`$< .cpp.obj: $(CXX) $(CXXFLAGS) $(INCL) -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(SRCDIR)/$<'; fi` .c.o: $(CC) $(CFLAGS) $(INCL) -c -o $@ `test -f '$<' || echo '$(SRCDIR)/'`$< .c.obj: $(CC) $(CFLAGS) $(INCL) -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(SRCDIR)/$<'; fi` The other Makefile compiles a lot of code and makes use of bison and flex. This one is also made by someone else. I am able to alter this Makefile when I want to add some code. This Makefile also makes a binary. CFLAGS=-Wall LDLIBS=-LC:/GnuWin32/lib -lfl -lm LSOURCES=lex.l YSOURCES=grammar.ypp CSOURCES=debug.cpp esta_plus.cpp heap.cpp main.cpp stjn.cpp timing.cpp tmsp.cpp token.cpp chaining.cpp flexibility.cpp exceptions.cpp HSOURCES=$(CSOURCES:.cpp=.h) includes.h OBJECTS=$(LSOURCES:.l=.o) $(YSOURCES:.ypp=.tab.o) $(CSOURCES:.cpp=.o) all: solver solver: CFLAGS+=-g -O0 -DDEBUG solver: $(OBJECTS) main.o debug.o g++ $(CFLAGS) -o $@ $^ $(LDLIBS) solver.release: CFLAGS+=-O5 solver.release: $(OBJECTS) main.o g++ $(CFLAGS) -o $@ $^ $(LDLIBS) %.o: %.cpp g++ -c $(CFLAGS) -o $@ $< lex.cpp: lex.l grammar.tab.cpp grammar.tab.hpp flex -o$@ $< %.tab.cpp %.tab.hpp: %.ypp bison --verbose -d $< ifneq ($(LSOURCES),) $(LSOURCES:.l=.cpp): $(YSOURCES:.y=.tab.h) endif -include $(OBJECTS:.o=.d) clean: rm -f $(OBJECTS) $(OBJECTS:.o=.d) $(YSOURCES:.ypp=.tab.cpp) $(YSOURCES:.ypp=.tab.hpp) $(YSOURCES:.ypp=.output) $(LSOURCES:.l=.cpp) solver solver.release 2>/dev/null .PHONY: all clean debug release Both of these Makefiles are, for me, hard to understand. I don't know what they exactly do. What I want is to merge the two of them so I get only one binary. The code compiled in the second Makefile should be the result. I want to add flexibility.cpp and constraints.cpp to the second Makefile, but when I do. I get the problem following problem: flexibility.h:4:26: fatal error: ClpSimplex.hpp: No such file or directory #include "ClpSimplex.hpp" So the compiler can't find the Clp library. I also tried to copy-paste more code from the first Makefile into the second, but it still gives me that same error. Q: Can you please help me with merging the two makefiles or pointing out a more elegant way? Q: In this case is it indeed better to merge the two Makefiles? I also tried to use cmake, but I gave upon that one quickly, because I don't know much about flex and bison.

    Read the article

  • Install TurboGears on windows xp

    - by coder
    I've been trying to get TurboGears installed on Windows by following this site. I've installed virtualenv but when I execute the command "virtualenv --no-site-packages testproj", I get the following message: New python executable in testproj\Scripts\python.exe Traceback (most recent call last): File "C:\Python26\Scripts\virtualenv-script.py", line 8, in load_entry_point('virtualenv==1.4.5', 'console_scripts', 'virtualenv')() File "C:\Python26\lib\site-packages\virtualenv-1.4.5-py2.6.egg\virtualenv.py", line 529, in main use_distribute=options.use_distribute) File "C:\Python26\lib\site-packages\virtualenv-1.4.5-py2.6.egg\virtualenv.py", line 612, in create_environment site_packages=site_packages, clear=clear)) File "C:\Python26\lib\site-packages\virtualenv-1.4.5-py2.6.egg\virtualenv.py", line 837, in install_python stdout=subprocess.PIPE) File "C:\Python26\lib\subprocess.py", line 621, in __init__ errread, errwrite) File "C:\Python26\lib\subprocess.py", line 830, in _execute_child startupinfo) WindowsError: [Error 14001] This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem Can someone help me debug this ? If any one knows a better tutorial to install turbogears, please let me know.

    Read the article

  • cannot import name formats

    - by cadthecoder
    what does it mean? i ve googled but found nothing =/ ImportError at /admin/ cannot import name formats Request Method: GET Request URL: http://127.0.0.1:8000/admin/ Exception Type: ImportError Exception Value: cannot import name formats Exception Location: /usr/lib/python2.6/site-packages/django/contrib/admin/util.py in <module>, line 3 Python Executable: /usr/bin/python Python Version: 2.6.0 Python Path: ['/home/cad/project/lkd/gezegen/lkd_gezegen', '/usr/lib64/python26.zip', '/usr/lib64/python2.6', '/usr/lib64/python2.6/plat-linux2', '/usr/lib64/python2.6/lib-tk', '/usr/lib64/python2.6/lib-old', '/usr/lib64/python2.6/lib-dynload', '/usr/lib64/python2.6/site-packages', '/usr/lib64/python2.6/site-packages/Numeric', '/usr/lib64/python2.6/site-packages/PIL', '/usr/lib64/python2.6/site-packages/gst-0.10', '/usr/lib64/python2.6/site-packages/gtk-2.0', '/usr/lib64/python2.6/site-packages/wx-2.8-gtk2-unicode', '/usr/lib/python2.6/site-packages']

    Read the article

  • Ruby 1.8.7 compatibility

    - by Sebastian
    I had a exception when I switch to Ruby 1.8.7 on Snow Leopard ArgumentError: wrong number of arguments (1 for 0) /Library/Ruby/Gems/1.8/gems/activerecord-1.15.5/lib/active_record/connection_adapters/abstract/quoting.rb:27:in 'to_s' /Library/Ruby/Gems/1.8/gems/activerecord-1.15.5/lib/active_record/connection_adapters/abstract/quoting.rb:27:in 'quote' /Library/Ruby/Gems/1.8/gems/activerecord-1.15.5/lib/active_record/connection_adapters/mysql_adapter.rb:190:in 'quote' /Library/Ruby/Gems/1.8/gems/activerecord-1.15.5/lib/active_record/base.rb:2042:in 'quote_value' /Library/Ruby/Gems/1.8/gems/activerecord-1.15.5/lib/active_record/base.rb:2034:in 'attributes_with_quotes' Application uses Rails 1.2.5: there is no chance to update rails in this app. Somebody have solution?

    Read the article

  • I keep Getting KeyError: 'tried' Whenever I Tried to Run Django Dev Server from Remote Machine

    - by Spikie
    I am running django on python2.6.1, and did start the django web server like this manage.py runserver 192.0.0.1:8000 then tried to connect to the django dev web server on http://192.0.0.1:8000/ keep getting this message on the remote computer Traceback (most recent call last): File "C:\Python26\Lib\site-packages\django\core\servers\basehttp.py", line 279, in run self.result = application(self.environ, self.start_response) File "C:\Python26\Lib\site-packages\django\core\servers\basehttp.py", line 651, in call return self.application(environ, start_response) File "C:\Python26\lib\site-packages\django\core\handlers\wsgi.py", line 241, in call response = self.get_response(request) File "C:\Python26\lib\site-packages\django\core\handlers\base.py", line 115, in get_response return debug.technical_404_response(request, e) File "C:\Python26\Lib\site-packages\django\views\debug.py", line 247, in technical_404_response tried = exception.args[0]['tried'] KeyError: 'tried' what i am doing wrong ? it seen to work ok if i run http://192.0.0.1:8000/ on the computer that runs the Django web server and have that ip 192.0.0.1:8000

    Read the article

  • Python analog of Unix 'which'

    - by bgbg
    In *nix systems one can use which to find out the full path to a command. For example: $ which python /usr/bin/python or whereis to show all possible locations for a given command $ whereis python python: /bin/python.exe /bin/python2.5-config /usr/bin/python.exe /usr/bin/python2.5-config /lib/python2.4 /lib/python2.5 /usr/lib/python2.4 /usr/lib/python2.5 /usr/include/python2.4 /usr/include/python2.5 /usr/share/man/man1/python.1 Is there an easy way to find out the location of a module in the PYTHONPATH. Something like: >>> which (sys) 'c:\\Python25\Lib\site-packages'

    Read the article

  • need help with installing shared libraries on linux

    - by naiquevin
    Hi, I am new to linux and trying to get the Ajax Push engine server to work on Ubuntu 9.04. I installed the server from source it fails the check that it does by using its own javascript framework. The problem is that it fails to load the modules and the output that i get in the terminal when i start it is. [Module] Failed to load ../modules/lib/libmod_spidermonkey.so [Invalid library] (libmysac.so.0.0: cannot open shared object file: No such file or directory) i thought i had to install mysac lib as a shared lib, so after some searching i copied the libmysac.so to /usr/local/lib/ and upon running ldconfig there it created the symlink. But still it gived the same error. Now I copied the libmod_spidermonkey.so in the shared lib dir. But this time ldconfig did not create any symlinks. I am really confused and looking for some pointers . Please help

    Read the article

  • Emacs CEDET and system include paths

    - by synasius
    Hello everyone, I'd like to add path to the openMPI library headers. So, after i found all openMPI headers are in /usr/lib/openmpi/include/* i added these two lines to my .emacs: (semantic-add-system-include "/usr/lib/openmpi/include" 'c-mode) (semantic-add-system-include "/usr/lib/openmpi/include" 'c++-mode) I think this is ok, but it's not working! This is the result of semantic-c-describe-envirnoment command: This file's system include path is: /usr/include /usr/local/include/ /usr/lib/gcc/i486-linux-gnu/4.4.3/include/ /usr/lib/gcc/i486-linux-gnu/4.4.3/include-fixed/ /usr/include/ Can't figure out what's wrong or what i'm missing Thanks

    Read the article

  • Django + WebKit = Broken pipe

    - by Saosin
    I'm running the Django 1.2 development server and I get these Broken Pipe error messages whenever I load a page from it with Chrome or Safari. My co-worker is getting the error as well when he loads a page from his dev server. We don't have these errors when using Opera or Firefox. Traceback (most recent call last): File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/django/core/servers/basehttp.py", line 281, in run self.finish_response() File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/django/core/servers/basehttp.py", line 321, in finish_response self.write(data) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/django/core/servers/basehttp.py", line 417, in write self._write(data) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/socket.py", line 300, in write self.flush() File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/socket.py", line 286, in flush self._sock.sendall(buffer) error: [Errno 32] Broken pipe Can anyone help me out? I'm going crazy over this!

    Read the article

  • intalling linecache-0.46 gem(I am using rbenv)

    - by user2899281
    While bundle install the error: Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension. /home/launchpad/.rbenv/versions/1.9.3-p448/bin/ruby extconf.rb Can't handle 1.9.x yet * extconf.rb failed * Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/home/launchpad/.rbenv/versions/1.9.3-p448/bin/ruby Gem files will remain installed in /home/launchpad/.rbenv/versions/1.9.3-p448/lib/ruby/gems/1.9.1/gems/linecache-0.46 for inspection. Results logged to /home/launchpad/.rbenv/versions/1.9.3-p448/lib/ruby/gems/1.9.1/gems/linecache-0.46/ext/gem_make.out An error occurred while installing linecache (0.46), and Bundler cannot continue. Make sure that gem install linecache -v '0.46' succeeds before bundling.

    Read the article

  • Possible to use a .dll on Linux

    - by random_hero
    Question: Is it possible to compile a program on linux using a .dll file? Where this is going: This .dll will be used to write a php extension to some proprietary software from a third party. Background and Research: I have been given a library called proprietary.lib. I was curious, as I have never seen the .lib extension before, so I typed: file proprietary.lib The output was: proprietary.lib: current ar archive I did some research and found that ar is more-or-less tar (and in fact, I guess tar has since replaced ar in most *nix environments). Upon inspecting the ar manpage, I saw the t option, which displays a table listing of the contents of that archive. Cool. So I type: ar t proprietary.lib And get: proprietary.dll proprietary.dll ... (snip X lines) ...

    Read the article

  • How to use OpenCV in Python?

    - by Roman
    I have just installed OpenCV on my Windows 7 machine. As a result I get a new directory: C:\OpenCV2.2\Python2.7\Lib\site-packages In this directory I have two files: cv.lib and cv.pyd. Then I try to use the opencv from Python. I do the following: import sys sys.path.append('C:\OpenCV2.2\Python2.7\Lib\site-packages') import cv As a result I get the following error message: File "<stdin>", line 1, in <module> ImportError: DLL load failed: The specified module could not be found. What am I doing wrong? ADDED As it was recommended here, I have copied content of C:\OpenCV2.0\Python2.6\Lib\site-packages to the C:\Python26\Lib\site-packages. It did not help.

    Read the article

  • How to build third party libraries with Android NDK

    - by heiko.witte
    How can I compile third party libraries with the android NDK? I am compiling a wrapper which implements the JNI functions as a shared lib, which depends on another 3rd party lib (HTK). I don't know how to setup the makefile. The following does not work: LOCAL_PATH := $(call my-dir) include $(CLEAR_VARS) include HTKLib/Android.mk LOCAL_PATH := $(call my-dir) include $(CLEAR_VARS) LOCAL_MODULE := gaitfuncs LOCAL_SRC_FILES := gaitfuncs.c %LOCAL_LDLIBS := -L$(SYSROOT)/usr/lib -llog include $(BUILD_SHARED_LIBRARY) The second makefile should then build a static lib which my shared lib links to. How can I include this subdir makefile properly? Is this the correct way of doing it? And as a bonus: Are there wildcards for the LOCAL_SRC_FILES variable to take all files ending in .c for example. Thanks!

    Read the article

  • I have an Errno 13 Permission denied with subprocess in python

    - by wDroter
    The line with the issue is ret=subprocess.call(shlex.split(cmd)) cmd = /usr/share/java -cp pig-hadoop-conf-Simpsons:lib/pig-0.8.1-cdh3u1-core.jar:lib/hadoop-core-0.20.2-cdh3u1.jar org.apache.pig.Main -param func=cat -param from =foo.txt -x mapreduce fsFunc.pig The error is. File "./run_pig.py", line 157, in process ret=subprocess.call(shlex.split(cmd)) File "/usr/lib/python2.7/subprocess.py", line 493, in call return Popen(*popenargs, **kwargs).wait() File "/usr/lib/python2.7/subprocess.py", line 679, in __init__ errread, errwrite) File "/usr/lib/python2.7/subprocess.py", line 1249, in _execute_child raise child_exception OSError: [Errno 13] Permission denied Let me know if any more info is needed. Any help is appreciated. Thanks.

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >