Search Results

Search found 1913 results on 77 pages for 'msg'.

Page 52/77 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • How does this ruby error handling module code work

    - by Michael Durrant
    Trying to get a better handle on ruby exception handling. I have this code (from a book): def err_with_msg(pattern) m = Module.new (class << m; self; end).instance_eval do define_method(:===) do |e| pattern === e.msg end end m end So ok this is a method. We're creating a new Module. I think of module as mix-ins. Not sure what it's doing here. Not we add the module to the class. Fair enough. Then we have self on its own. What that for? I guess we have a little anonymouse method this is just about self. hmmm ok, now for each of the above, check the pattern match. but for each, I thought the above for for a new Module, did the module get to use instance's by being included? A better explanation of what's going on here would be most helpful.

    Read the article

  • Banshee crashes consistently - is there a fix?

    - by user36334
    Since updating to ubuntu 11.10 I've had trouble with banshee. In particular when I run it I find that it crashes within an hour without fail. I get the following Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object at Mono.Zeroconf.Providers.AvahiDBus.BrowseService.DisposeResolver () [0x00000] in <filename unknown>:0 at Mono.Zeroconf.Providers.AvahiDBus.BrowseService.Dispose () [0x00000] in <filename unknown>:0 at Mono.Zeroconf.Providers.AvahiDBus.ServiceBrowser.OnItemRemove (Int32 interface, Protocol protocol, System.String name, System.String type, System.String domain, LookupResultFlags flags) [0x00000] in <filename unknown>:0 at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&) at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 at System.Reflection.MethodBase.Invoke (System.Object obj, System.Object[] parameters) [0x00000] in <filename unknown>:0 at System.Delegate.DynamicInvokeImpl (System.Object[] args) [0x00000] in <filename unknown>:0 at System.MulticastDelegate.DynamicInvokeImpl (System.Object[] args) [0x00000] in <filename unknown>:0 at System.Delegate.DynamicInvoke (System.Object[] args) [0x00000] in <filename unknown>:0 at NDesk.DBus.Connection.HandleSignal (NDesk.DBus.Message msg) [0x00000] in <filename unknown>:0 at NDesk.DBus.Connection.DispatchSignals () [0x00000] in <filename unknown>:0 at NDesk.DBus.Connection.Iterate () [0x00000] in <filename unknown>:0 at Mono.Zeroconf.Providers.AvahiDBus.DBusManager.IterateThread (System.Object o) [0x00000] in <filename unknown>:0 Does anyone else also have this problem?

    Read the article

  • SQL SERVER – Using RAND() in User Defined Functions (UDF)

    - by pinaldave
    Here is the question I received in email. “Pinal, I am writing a function where we need to generate random password. While writing T-SQL I faced following issue. Everytime I tried to use RAND() function in my User Defined Function I am getting following error: Msg 443, Level 16, State 1, Procedure RandFn, Line 7 Invalid use of a side-effecting operator ‘rand’ within a function. Here is the simplified T-SQL code of the function which I am using: CREATE FUNCTION RandFn() RETURNS INT AS BEGIN DECLARE @rndValue INT SET @rndValue = RAND() RETURN @rndValue END GO I must use UDF so is there any workaround to use RAND function in UDF.” Here is the workaround how RAND() can be used in UDF. The scope of the blog post is not to discuss the advantages or disadvantages of the function or random function here but just to show how RAND() function can be used in UDF. RAND() function is directly not allowed to use in the UDF so we have to find alternate way to use the same function. This can be achieved by creating a VIEW which is using RAND() function and use the same VIEW in the UDF. Here is the step by step instructions. Create a VIEW using RAND function. CREATE VIEW rndView AS SELECT RAND() rndResult GO Create a UDF using the same VIEW. CREATE FUNCTION RandFn() RETURNS DECIMAL(18,18) AS BEGIN DECLARE @rndValue DECIMAL(18,18) SELECT @rndValue = rndResult FROM rndView RETURN @rndValue END GO Now execute the UDF and it will just work fine and return random result. SELECT dbo.RandFn() GO In T-SQL world, I have noticed that there are more than one solution to every problem. Is there any better solution to this question? Please post that question as a comment and I will include it with due credit. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: technology

    Read the article

  • Google ranking, page crawl

    - by Nawaf Mubarak
    please don't mind me for asking this newbie question about Google ranking. I know that in order to get ranked the page has to be crawled by Google bots, I have had a page example of which I will get a better understanding of how the system works with Google. I have made a page on my website last month, it got indexed pretty quickly, then I found that it's in Google's page 15 on my keyword as a start, next day it made it to page 13, then after a week it was jumping back and forth in page 17/18 up to 20. Now a month passed by, when and it isn't listed in any position of that 'keyword' sometimes I will find it in page 30, but later I won't find it anywhere, keep happening this way these days. Even if it isn't listed in any page for my keyword if I do a search for "site:thepageadress" it will be listed which means I'm not penalized and my page is there for google to see, but it isn't in the search result for my keyword. But when I write "site:thepage_adress" and I hit "search tools" option and click on "Past day" or "past week" it isn't listed, it is only listed when I click on "Past month" which I think means that Google indexed the page, looked at it once when I published it, and never looked at it again, is this a fair statement? So two questions that comes to mind here. 1- Should Google keep looking at a page even if I haven't changed any info for it? and is this an indication for me that my page is doing fine? or is it normal that Google see's it once and thats it? 2- Why and how to fix the fact that my page keeps jumping back and forth in the ranking result for keyword, and sometimes it isn't even listed, what does that mean? Sorry for the long msg, I hope to god that somebody help me with this. Thank you!

    Read the article

  • LDAP ACI Debugging

    - by user13332755
    If you've ever wondered which ACI in LDAP is used for a special ADD/DELETE/MODIFY/SEARCH request you need to enable ACI debugging to get details about this. Edit/Modify dse.ldifnsslapd-infolog-area: 128nsslapd-infolog-level: 1ACI Logging will be placed at 'errors' file, looks like: [22/Jun/2011:15:25:08 +0200] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 -  Num of ALLOW Handles:15, DENY handles:0 [22/Jun/2011:15:25:08 +0200] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 -  Processed attr:nswmExtendedUserPrefs for entry:uid=mparis,ou=people,o=vmdomain.tld,o=isp [22/Jun/2011:15:25:08 +0200] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 -  Evaluating ALLOW aci index:33 [22/Jun/2011:15:25:08 +0200] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 -  ALLOW:Found READ ALLOW in cache [22/Jun/2011:15:25:08 +0200] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 -  acl_summary(main): access_allowed(read) on entry/attr(uid=mparis,ou=people,o=vmdomain.tld,o=isp, nswmExtendedUserPrefs) to (uid=msg-admin-redzone.vmdomain.tld-20100927093314,ou=people,o=vmdomain.tld,o=isp) (not proxied) (reason: result cached allow , deciding_aci  "DA anonymous access rights", index 33)

    Read the article

  • Cannot create a neutral unit with a trigger

    - by Xitcod13
    I've been playing around with the starcraft UMS (Use map settings) for a while and usually i figure things out pretty quickly when im stuck. Alas not this time. I'm trying to place a neutral unit (player 12) using a trigger. It refuses to work. I'm using Scmdraft 2.0 as my editor (but i cant get it to work in other editors either) (all neutral units placed before the game starts are visible and all other triggers work fine. Also i created a text msg and it does displays it in-game so the trigger triggers ) For testing I created a trigger that looks like this: Player: neutral (i tried neutral players player 1 and all players as well) Condition: -always Action: -Create *1 Terran Medic* at '*location 022*' for *Neutral* (also tried neutral players) When I start the game nothing happens. Here is what I tried: I tried placing a start location for neutral player (player 12) I tried changing the owner under map properties of player 12 to neutral and computer from unused which was the default. Although it seems like it should be a common enough problem, I don't see it in any FAQ and I cant find anything about it when I Google it. Thanks in advance.

    Read the article

  • A Disk Read Error Occured. Press CTRL+ALT+DEL to restart

    - by darroosh
    I'm new to linux world. Just downloaded ubuntu and installed it alongside with windows 7 . In grub when I choose ubuntu, it opens with no problem, but when I try to open windows 7, this message appears: A Disk Read Error Occured. Press CTRL+ALT+DEL to restart. I googled for that problem which directed me to download a boot repair tool, when I choose : advanced options / retore MBR --> apply, then restart computer , It boot to win 7 without loading the grub menu. then I opened the live ubuntu from a USB, launched the "boot repair" again, choose : recommended repair , then restart, It returns to the first problem , grub menu appear, from which I can choose only ubuntu , but win 7 show this msg again : A Disk Read Error Occured. Press CTRL+ALT+DEL to restart. I repeated more and more with the same results ... What should I do? I created a boot info summary using the "boot repair tool" if this can help , it's in this URL.

    Read the article

  • Latest (5 June 14) Updates t0 10.04 Causing Multiple Problems

    - by user291780
    Apologies, the questions are very short, but the bkg isn't. I rec'd a routine notification from the update mgr a few days ago (I believe, June 5th). I took a look and there was lots of linux stuff, headers, etc., nothing obviously unusual. I'd rec'd and updated w/a more extensive pkg set, kernel and all a few weeks ago, no problem. On June 6, I pushed the upgrade button on the June 5th batch, nothing usual, needed a reboot, which I did after a full power down, it came up fine. Gedit worked, the calculator worked, started up firefox, it came up, selected the BookMarks menu, and blam, it hesitated and then greyed out, when I tried to close it, got the "process not responding" msg. Undaunted, I tried to fire up Google Chrome....nothing on the screen or process bar. I fired up the system monitor and indeed there were some "sleeping" chrome processes "running". Powered down several times, but the same problems persist. Similar but worse story when I tried to fire up one of my virtual machines, VirtualBox came up fine, but when I tried to start one of my virtual machines I got a progress popup that I'd never seen before which showed that we were making no progress past 20%. Uninstalled Oracle VirtualBox, reinstalled the latest and greatest, same result. Also, unable to logout, or shutdown once the virtual machine exhibited this behavior. Powered down manually, end of story. Never saw such a bad result after an update. I'm running Ubuntu 10.04 LTS (Lucid Lynx) as I have been for a number of years. Please don't reply with why don't you run some other version of Ubuntu, that doesn't answer the questions below. Questions: Will their be a subsequent update that fixes this, and if so, when? If not, is there a way for me to get back to where I was before this disaster?

    Read the article

  • Query for server DefaultData & DefaultLog folders

    - by jamiet
    Do you ever need to query for the DefaultData & DefaultLog folders for your SQL Server instance? Well, I just did and the following script enabled me to do that: DECLARE @HkeyLocal NVARCHAR(18),@MSSqlServerRegPath NVARCHAR(31),@InstanceRegPath SYSNAME; SELECT @HkeyLocal=N'HKEY_LOCAL_MACHINE' SELECT @MSSqlServerRegPath=N'SOFTWARE\Microsoft\MSSQLServer' SELECT @InstanceRegPath=@MSSqlServerRegPath + N'\MSSQLServer' DECLARE @SmoDefaultFile NVARCHAR(512) EXEC MASTER.dbo.xp_instance_regread @HkeyLocal, @InstanceRegPath, N'DefaultData', @SmoDefaultFile OUTPUT DECLARE @SmoDefaultLog NVARCHAR(512) EXEC MASTER.dbo.xp_instance_regread @HkeyLocal, @InstanceRegPath, N'DefaultLog', @SmoDefaultLog OUTPUT SELECT ISNULL(@SmoDefaultFile,N'') AS [DefaultFile],ISNULL(@SmoDefaultLog,N'') AS [DefaultLog]' I haven’t done any rigorous testing or anything like that, all I can say is…it worked for me (on SQL Server 2012). Use as you see fit. Doubtless this information exists in a multitude of other places but nevertheless I’m putting it here so I know where to find it in the future. Just for fun I thought I’d try this out against SQL Azure Windows Azure SQL Database. Unsurprisingly it didn’t work there: Msg 40515, Level 15, State 1, Line 16 Reference to database and/or server name in 'MASTER.dbo.xp_instance_regread' is not supported in this version of SQL Server. @Jamiet

    Read the article

  • Tweak Conky Layout via a script

    - by begtognen
    I'm using a script in Conky in order to display my new gmail on my desktop. It works beautifully, but is kind of ugly, and I'm not sure how to fix it. What I've currently got looks like this: And what I'd like is this: Any ideas for how to make that happen are much appreciated. Here's the script I'm currently using (I think I've snipped out the correct part, if I haven't please let me know.) #!/usr/bin/perl use Switch; use Text::Wrap; my $what=$ARGV[0]; $user="username"; #username for gmail account $pass="password"; #password for gmail account $file="/tmp/gmail.html"; #temporary file to store gmail #wrap format for subject $Text::Wrap::columns=65; #Number of columns to wrap subject at $initial_tab=""; #Tab for first line of subject $subsequent_tab="\t"; #tab for wrapped lines $quote="\""; #put quotes around subject #limit the number of emails to be displayed $emails=-1; #if -1 display all emails &passwd; #give password the proper url character encoding switch($what){ #determine what the user wants case "n" {&gmail; print "$new\n";} #print number of new emails case "s" { #print $from and $subj for new email &gmail; if ($new0){ my $size=@from; if ($emails!=-1 && $size$emails){$size=$emails;} #limit number of emails displayed for(my $i=0; $i$emails){print "$emails out of $size new emails displayed\n";} } } case "e" { #print number of new emails, $from, and $subj &gmail; if($new==0){print "You have no new emails.\n";} else{ print "You have $new new email(s).\n"; my $size=@from; if ($emails!=-1 && $size$emails){$size=$emails;} #limit number of emails displayed for(my $i=0; $i$emails){print "$emails out of $size new emails displayed\n";} } } else { print "Usage Error: gmail.pl \n"; print "\tn displays number of new emails\n"; print "\ts displays from line and subject line for each new email.\n"; print "\te displays the number of new emails and from line plus \n"; print "\t\tsubject line for each new email.\n"; } #didn't give proper option } sub gmail{ if(!(-e $file)){ #create file if it does not exists `touch $file`; } #get new emails `wget -O - https://$user:$pass\@mail.google.com/mail/feed/atom --no-check-certificate $file`; open(IN, $file); #open $file my $i=0; #initialize count $new=0; #initialize new emails to 0 my $flag=0; while(){ #cycle through $file if(//){$flag=1;} elsif(/(\d+)/){$new=$1;} #grab number of new emails elsif($flag==1){ if(/.+/){push(@subj, &msg);} #grab new email titles elsif(/(.+)/){push(@from, $1); $flag=0;} #grab new email from lines } } close(IN); #close $file } sub passwd{ #change to url escape codes in password #URL ESCAPE CODES $_=$pass; s/\%/\%25/g; s/\#/\%23/g; s/\$/\%24/g; s/\&/\%26/g; s/\//\%2F/g; s/\:/\%3A/g; s/\;/\%3B/g; s/\/\%3E/g; s/\?/\%3F/g; s/\@/\%40/g; s/\[/\%5B/g; s/\\/\%5C/g; s/\]/\%5D/g; s/\^/\%5E/g; s/\`/\%60/g; s/\{/\%7B/g; s/\|/\%7C/g; s/\}/\%7D/g; s/\~/\%7E/g; $pass=$_; } sub msg{ #THE HTML CODED CHARACTER SET [ISO-8859-1] chomp; s/(.+)/$1/; #get just the subject #now replace any special characters s/\&\#33\;/!/g; #Exclamation mark s/\&\#34\;/"/g; s/\"\;/"/g; #Quotation mark s/\&\#35\;/#/g; #Number sign s/\&\#36\;/\$/g; #Dollar sign s/\&\#37\;/%/g; #Percent sign s/\&\#38\;/&/g; s/\&\;/&/g; #Ampersand s/\&\#39\;/'/g; #Apostrophe s/\&\#40\;/(/g; #Left parenthesis s/\&\#41\;/)/g; #Right parenthesis s/\&\#42\;/*/g; #Asterisk s/\&\#43\;/+/g; #Plus sign s/\&\#44\;/,/g; #Comma s/\&\#45\;/-/g; #Hyphen s/\&\#46\;/./g; #Period (fullstop) s/\&\#47\;/\//g; #Solidus (slash) s/\&\#58\;/:/g; #Colon s/\&\#59\;/\;/g; #Semi-colon s/\&\#60\;//g; s/\>\;//g; #Greater than s/\&\#63\;/\?/g; #Question mark s/\&\#64\;/\@/g; #Commercial at s/\&\#91\;/\[/g; #Left square bracket s/\&\#92\;/\\/g; #Reverse solidus (backslash) s/\&\#93\;/\]/g; #Right square bracket s/\&\#94\;/\^/g; #Caret s/\&\#95\;/_/g; #Horizontal bar (underscore) s/\&\#96\;/\`/g; #Acute accent s/\&\#123\;/\{/g; #Left curly brace s/\&\#124\;/|/g; #Vertical bar s/\&\#125\;/\}/g; #Right curly brace s/\&\#126\;/~/g; #Tilde s/\&\#161\;/¡/g; #Inverted exclamation s/\&\#162\;/¢/g; #Cent sign s/\&\#163\;/£/g; #Pound sterling s/\&\#164\;/¤/g; #General currency sign s/\&\#165\;/¥/g; #Yen sign s/\&\#166\;/¦/g; #Broken vertical bar s/\&\#167\;/§/g; #Section sign s/\&\#168\;/¨/g; #Umlaut (dieresis) s/\&\#169\;/©/g; s/\©\;/©/g; #Copyright s/\&\#170\;/ª/g; #Feminine ordinal s/\&\#171\;/«/g; #Left angle quote, guillemotleft s/\&\#172\;/¬/g; #Not sign s/\&\#174\;/®/g; #Registered trademark s/\&\#175\;/¯/g; #Macron accent s/\&\#176\;/°/g; #Degree sign s/\&\#177\;/±/g; #Plus or minus s/\&\#178\;/²/g; #Superscript two s/\&\#179\;/³/g; #Superscript three s/\&\#180\;/´/g; #Acute accent s/\&\#181\;/µ/g; #Micro sign s/\&\#182\;/¶/g; #Paragraph sign s/\&\#183\;/·/g; #Middle dot s/\&\#184\;/¸/g; #Cedilla s/\&\#185\;/¹/g; #Superscript one s/\&\#186\;/º/g; #Masculine ordinal s/\&\#187\;/»/g; #Right angle quote, guillemotright s/\&\#188\;/¼/g; s/\¼\;/¼/g; # Fraction one-fourth s/\&\#189\;/½/g; s/\½\;/½/g; # Fraction one-half s/\&\#190\;/¾/g; s/\¾\;/¾/g; # Fraction three-fourths s/\&\#191\;/¿/g; #Inverted question mark s/\&\#192\;/À/g; #Capital A, grave accent s/\&\#193\;/Á/g; #Capital A, acute accent s/\&\#194\;/Â/g; #Capital A, circumflex accent s/\&\#195\;/Ã/g; #Capital A, tilde s/\&\#196\;/Ä/g; #Capital A, dieresis or umlaut mark s/\&\#197\;/Å/g; #Capital A, ring s/\&\#198\;/Æ/g; #Capital AE dipthong (ligature) s/\&\#199\;/Ç/g; #Capital C, cedilla s/\&\#200\;/È/g; #Capital E, grave accent s/\&\#201\;/É/g; #Capital E, acute accent s/\&\#202\;/Ê/g; #Capital E, circumflex accent s/\&\#203\;/Ë/g; #Capital E, dieresis or umlaut mark s/\&\#204\;/Ì/g; #Capital I, grave accent s/\&\#205\;/Í/g; #Capital I, acute accent s/\&\#206\;/Î/g; #Capital I, circumflex accent s/\&\#207\;/Ï/g; #Capital I, dieresis or umlaut mark s/\&\#208\;/Ð/g; #Capital Eth, Icelandic s/\&\#209\;/Ñ/g; #Capital N, tilde s/\&\#210\;/Ò/g; #Capital O, grave accent s/\&\#211\;/Ó/g; #Capital O, acute accent s/\&\#212\;/Ô/g; #Capital O, circumflex accent s/\&\#213\;/Õ/g; #Capital O, tilde s/\&\#214\;/Ö/g; #Capital O, dieresis or umlaut mark s/\&\#215\;/×/g; #Multiply sign s/\&\#216\;/Ø/g; #Capital O, slash s/\&\#217\;/Ù/g; #Capital U, grave accent s/\&\#218\;/Ú/g; #Capital U, acute accent s/\&\#219\;/Û/g; #Capital U, circumflex accent s/\&\#220\;/Ü/g; #Capital U, dieresis or umlaut mark s/\&\#221\;/Ý/g; #Capital Y, acute accent s/\&\#222\;/Þ/g; #Capital THORN, Icelandic s/\&\#223\;/ß/g; #Small sharp s, German (sz ligature) s/\&\#224\;/à/g; #Small a, grave accent s/\&\#225\;/á/g; #Small a, acute accent s/\&\#226\;/â/g; #Small a, circumflex accent s/\&\#227\;/ã/g; #Small a, tilde s/\&\#228\;/ä/g; #Small a, dieresis or umlaut mark s/\&\#229\;/å/g; #Small a, ring s/\&\#230\;/æ/g; #Small ae dipthong (ligature) s/\&\#231\;/ç/g; #Small c, cedilla s/\&\#232\;/è/g; #Small e, grave accent s/\&\#233\;/é/g; #Small e, acute accent s/\&\#234\;/ê/g; #Small e, circumflex accent s/\&\#235\;/ë/g; #Small e, dieresis or umlaut mark s/\&\#236\;/ì/g; #Small i, grave accent s/\&\#237\;/í/g; #Small i, acute accent s/\&\#238\;/î/g; #Small i, circumflex accent s/\&\#239\;/ï/g; #Small i, dieresis or umlaut mark s/\&\#240\;/ð/g; #Small eth, Icelandic s/\&\#241\;/ñ/g; #Small n, tilde s/\&\#242\;/ò/g; #Small o, grave accent s/\&\#243\;/ó/g; #Small o, acute accent s/\&\#244\;/ô/g; #Small o, circumflex accent s/\&\#245\;/õ/g; #Small o, tilde s/\&\#246\;/ö/g; #Small o, dieresis or umlaut mark s/\&\#247\;/÷/g; #Division sign s/\&\#248\;/ø/g; #Small o, slash s/\&\#249\;/ù/g; #Small u, grave accent s/\&\#250\;/ú/g; #Small u, acute accent s/\&\#251\;/û/g; #Small u, circumflex accent s/\&\#252\;/ü/g; #Small u, dieresis or umlaut mark s/\&\#253\;/ý/g; #Small y, acute accent s/\&\#254\;/þ/g; #Small thorn, Icelandic s/\&\#255\;/ÿ/g; #Small y, dieresis or umlaut mark s/^\s+//; return $_; }

    Read the article

  • Branding Support for TopComponents

    - by Geertjan
    In yesterday's blog entry, you saw how a menu item can be created, in this case with the label "Brand", especially for Java classes that extend TopComponent: And, as you can see here, it's not about the name of the class, i.e., not because the class above is named "BlaTopComponent" because below the "Brand" men item is also available for the class named "Bla": Both the files BlaTopComponent.java and Bla.java have the "Brand" menu item available, because both extend the "org.openide.windows.TopComponent"  class, as shown yesterday. Now we continue by creating a new JPanel, with checkboxes for each part of a TopComponent that we consider to be brandable. In my case, this is the end result, at deployment, when the Brand menu item is clicked for the Bla class: When the user (who, in this case, is a developer) clicks OK, a constructor is created and the related client properties are added, depending on which of the checkboxes are clicked: public Bla() {     putClientProperty(TopComponent.PROP_SLIDING_DISABLED, false);     putClientProperty(TopComponent.PROP_UNDOCKING_DISABLED, true);     putClientProperty(TopComponent.PROP_MAXIMIZATION_DISABLED, false);     putClientProperty(TopComponent.PROP_CLOSING_DISABLED, true);     putClientProperty(TopComponent.PROP_DRAGGING_DISABLED, false); } At this point, no check is done to see whether a constructor already exists, nor whether the client properties are already available. That's for an upcoming blog entry! Right now, the constructor is always created, regardless of whether it already exists, and the client properties are always added. The key to all this is the 'actionPeformed' of the TopComponent, which was left empty yesterday. We start by creating a JDialog from the JPanel and we retrieve the selected state of the checkboxes defined in the JPanel: @Override public void actionPerformed(ActionEvent ev) {     String msg = dobj.getName() + " Branding";     final BrandTopComponentPanel brandTopComponentPanel = new BrandTopComponentPanel();     dd = new DialogDescriptor(brandTopComponentPanel, msg, true, new ActionListener() {         @Override         public void actionPerformed(ActionEvent e) {             Object result = dd.getValue();             if (DialogDescriptor.OK_OPTION == result) {                 isClosing = brandTopComponentPanel.getClosingCheckBox().isSelected();                 isDragging = brandTopComponentPanel.getDraggingCheckBox().isSelected();                 isMaximization = brandTopComponentPanel.getMaximizationCheckBox().isSelected();                 isSliding = brandTopComponentPanel.getSlidingCheckBox().isSelected();                 isUndocking = brandTopComponentPanel.getUndockingCheckBox().isSelected();                 JavaSource javaSource = JavaSource.forFileObject(dobj.getPrimaryFile());                 try {                     javaSource.runUserActionTask(new ScanTask(javaSource), true);                 } catch (IOException ex) {                     Exceptions.printStackTrace(ex);                 }             }         }     });     DialogDisplayer.getDefault().createDialog(dd).setVisible(true); } Then we start a scan process, which introduces the branding. We're already doing a scan process for identifying whether a class is a TopComponent. So, let's combine those two scans, branching out based on which one we're doing: private class ScanTask implements Task<CompilationController> {     private BrandTopComponentAction action = null;     private JavaSource js = null;     private ScanTask(JavaSource js) {         this.js = js;     }     private ScanTask(BrandTopComponentAction action) {         this.action = action;     }     @Override     public void run(final CompilationController info) throws Exception {         info.toPhase(Phase.ELEMENTS_RESOLVED);         if (action != null) {             new EnableIfTopComponentScanner(info, action).scan(                     info.getCompilationUnit(), null);         } else {             introduceBranding();         }     }     private void introduceBranding() throws IOException {         CancellableTask task = new CancellableTask<WorkingCopy>() {             @Override             public void run(WorkingCopy workingCopy) throws IOException {                 workingCopy.toPhase(Phase.RESOLVED);                 CompilationUnitTree cut = workingCopy.getCompilationUnit();                 TreeMaker treeMaker = workingCopy.getTreeMaker();                 for (Tree typeDecl : cut.getTypeDecls()) {                     if (Tree.Kind.CLASS == typeDecl.getKind()) {                         ClassTree clazz = (ClassTree) typeDecl;                         ModifiersTree methodModifiers = treeMaker.Modifiers(Collections.<Modifier>singleton(Modifier.PUBLIC));                         MethodTree newMethod =                                 treeMaker.Method(methodModifiers,                                 "<init>",                                 treeMaker.PrimitiveType(TypeKind.VOID),                                 Collections.<TypeParameterTree>emptyList(),                                 Collections.EMPTY_LIST,                                 Collections.<ExpressionTree>emptyList(),                                 "{ putClientProperty(TopComponent.PROP_SLIDING_DISABLED, " + isSliding + ");\n"+                                 "  putClientProperty(TopComponent.PROP_UNDOCKING_DISABLED, " + isUndocking + ");\n"+                                 "  putClientProperty(TopComponent.PROP_MAXIMIZATION_DISABLED, " + isMaximization + ");\n"+                                 "  putClientProperty(TopComponent.PROP_CLOSING_DISABLED, " + isClosing + ");\n"+                                 "  putClientProperty(TopComponent.PROP_DRAGGING_DISABLED, " + isDragging + "); }\n",                                 null);                         ClassTree modifiedClazz = treeMaker.addClassMember(clazz, newMethod);                         workingCopy.rewrite(clazz, modifiedClazz);                     }                 }             }             @Override             public void cancel() {             }         };         ModificationResult result = js.runModificationTask(task);         result.commit();     } } private static class EnableIfTopComponentScanner extends TreePathScanner<Void, Void> {     private CompilationInfo info;     private final AbstractAction action;     public EnableIfTopComponentScanner(CompilationInfo info, AbstractAction action) {         this.info = info;         this.action = action;     }     @Override     public Void visitClass(ClassTree t, Void v) {         Element el = info.getTrees().getElement(getCurrentPath());         if (el != null) {             TypeElement te = (TypeElement) el;             if (te.getSuperclass().toString().equals("org.openide.windows.TopComponent")) {                 action.setEnabled(true);             } else {                 action.setEnabled(false);             }         }         return null;     } }

    Read the article

  • Primefaces: java.lang.ClassCastException: java.util.HashMap cannot be cast to ClassObject

    - by razegarra
    I have a problem with p:dataTable in Primefaces, I can not find the error. Class UsuarioAsig: public class UsuarioAsig { private BigDecimal codigopersona; private String nombre; private String paterno; private String materno; private String login; private String observacion; private String tipocontrol; private String externo; private String habilitado; private String nombreperfil; private BigDecimal codigousuario; ...get and set...} Class UsuarioAsigListaDataModel: public class UsuarioAsigListaDataModel extends ListDataModel<UsuarioAsig> implements SelectableDataModel<UsuarioAsig> { public UsuarioAsigListaDataModel(){} public UsuarioAsigListaDataModel(List<UsuarioAsig> data){super(data);} @Override public UsuarioAsig getRowData(String rowKey) { @SuppressWarnings("unchecked") List<UsuarioAsig> listaUsuarioAsigLectura = (List<UsuarioAsig>) getWrappedData(); for (UsuarioAsig usuarioAsig : listaUsuarioAsigLectura) { if (usuarioAsig.getCodigopersona().equals(rowKey)) { return usuarioAsig; } } return null; } @Override public Object getRowKey(UsuarioAsig usuarioAsig) { return usuarioAsig.getCodigopersona(); }} Controller UsuarioAsigController: @Controller("usuarioAsigController") @Scope(value = "session") public class UsuarioAsigController { private List<UsuarioAsig> listaUsuarioAsig; private HashMap<String, Object> selUsuarioAsig; private UsuarioAsigListaDataModel mediumUsuarioAsigModel; @Autowired UsuarioService usuarioService; ... public List<UsuarioAsig> getListaUsuarioAsig() { listaUsuarioAsig = usuarioService.selectAsig(); return listaUsuarioAsig; } public void setListaUsuarioAsig(List<UsuarioAsig> listaUsuarioAsig) { this.listaUsuarioAsig = listaUsuarioAsig; } public void setMediumUsuarioAsigModel(UsuarioAsigListaDataModel mediumUsuarioAsigModel) { this.mediumUsuarioAsigModel = mediumUsuarioAsigModel; } public UsuarioAsigListaDataModel getMediumUsuarioAsigModel() { listaUsuarioAsig = usuarioService.selectAsig(); mediumUsuarioAsigModel = new UsuarioAsigListaDataModel(listaUsuarioAsig); return mediumUsuarioAsigModel; } public void onRowSelect(SelectEvent event) { FacesMessage msg = new FacesMessage("Usuario seleccionado", ((UsuarioAsig) event.getObject()).getNombre()); FacesContext.getCurrentInstance().addMessage(null, msg); } } the error is generated when you click on one of the lines of datatable: asiginst.xhtml: <h:form id="form"> <p:growl id="msgs" showDetail="true" /> <p:dataTable id="usuarioAsigListaDataModel" var="usuarioAsig" value="#{usuarioAsigController.mediumUsuarioAsigModel}" rowKey="#{usuarioAsig.codigopersona}" selection="#{usuarioAsigController.selUsuarioAsig}" selectionMode="single" paginator="true" rows="10"> <p:ajax event="rowSelect" listener="#{usuarioAsigController.onRowSelect}" update=":form:msgs" /> <p:column headerText="Código" style="width:10%">#{usuarioAsig.codigopersona}</p:column> <p:column headerText="Nombre" style="width:32%">#{usuarioAsig.nombre}</p:column> <p:column headerText="Apellidos" style="width:32%">#{usuarioAsig.paterno} #{usuarioasig.materno}</p:column> <p:column headerText="Tipo Control" style="width:20%">#{usuarioAsig.tipocontrol}</p:column> <p:column headerText="Habilitado" style="width:6%">#{usuarioAsig.habilitado}</p:column> </p:dataTable> </h:form> THE ERROR IS GENERATED: WARNING: asiginst.xhtml @51,103 listener="#{usuarioAsigController.onRowSelect}": java.lang.ClassCastException: java.util.HashMap cannot be cast to com.datos.entidades.qry.UsuarioAsig javax.el.ELException: asiginst.xhtml @51,103 listener="#{usuarioAsigController.onRowSelect}": java.lang.ClassCastException: java.util.HashMap cannot be cast to com.datos.entidades.qry.UsuarioAsig at com.sun.faces.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:111) at org.primefaces.behavior.ajax.AjaxBehaviorListenerImpl.processArgListener(AjaxBehaviorListenerImpl.java:69) at org.primefaces.behavior.ajax.AjaxBehaviorListenerImpl.processAjaxBehavior(AjaxBehaviorListenerImpl.java:56) at org.primefaces.event.SelectEvent.processListener(SelectEvent.java:40) at javax.faces.component.behavior.BehaviorBase.broadcast(BehaviorBase.java:102) at javax.faces.component.UIComponentBase.broadcast(UIComponentBase.java:760) at javax.faces.component.UIData.broadcast(UIData.java:1071) at javax.faces.component.UIData.broadcast(UIData.java:1093) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:794) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:1259) at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:81) at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:409) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:225) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:927) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407) at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:999) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:565) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:309) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:722) Caused by: java.lang.ClassCastException: java.util.HashMap cannot be cast to com.datos.entidades.qry.UsuarioAsig at com.controller.UsuarioAsigController.onRowSelect(UsuarioAsigController.java:217) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:601) at org.apache.el.parser.AstValue.invoke(AstValue.java:264) at org.apache.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:278) at com.sun.faces.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:105) ... 29 more

    Read the article

  • XML parsing error: 'A string literal was expected' when inserting values into table

    - by Christian
    In Microsoft Sequel Server 2008 I am attempting to insert values into an sql table with the columns type_id of datatype int and xml_info of datatype XML. I am using the following query: INSERT INTO tbl_applied_devices ([type_id],[xml_info]) VALUES (1,'<Profile ID=99><Server><ID>BC4A18CA-AFB5-4268-BDA9-C990DAFE7783</ID> <Name>localhost</Name><Services></Services></Server></Profile>') But I keep getting this error: Msg 9413, Level 16, State 1, Line 4 XML parsing: line 1, character 13, A string literal was expected What am I doing incorrectly? Thank you for the help. EDIT: I found that the source of the error is the xml element's ID attribute, where seems to be what is causing the error. How can I correctly insert xml with an attribute ? Do I need to somehow escape one of the characters?

    Read the article

  • Non-resizeable, bordered WPF Windows with WindowStyle=None

    - by danielmartinoli
    Basically, I need a window to look like the following image: http://screenshots.thex9.net/2010-05-31_2132.png (Is NOT resizeable, yet retains the glass border) I've managed to get it working with Windows Forms, but I need to be using WPF. To get it working in Windows Forms, I used the following code: protected override void WndProc(ref Message m) { if (m.Msg == 0x84 /* WM_NCHITTEST */) { m.Result = (IntPtr)1; return; } base.WndProc(ref m); } This does exactly what I want it to, but I can't find a WPF-equivalent. The closest I've managed to get with WPF caused the Window to ignore any mouse input. Any help would be hugely appreciated :)

    Read the article

  • C# RegEx - find html tags (div and anchor)

    - by czesio
    Hi I have to retrieve several div section (of specific class name "row ") with it's content, and additionally find all anchor tags (link urls) (with class "underline red bold"). Shortly speaing : get section of: ... (divs, tags ...) and collections of urls string[] urls = {"/searchClickThru? pid=prod56534895&q=&rpos=109181&rpp=10&_dyncharset=UTF-8&sort=&url=/culture-and-gender-intimate-relation-ksiazka,prod56534895,p"} the entire page looks like that: <html> ... a lot of stuff <div class="row "> <div class="photo"> <a rel="nofollow" href="/searchClickThru?pid=prod56534895&amp;q=&amp;rpos=109181&amp;rpp=10&amp;_dyncharset=UTF-8&amp;sort=&amp;url=/culture-and-gender-intimate-relation-ksiazka,prod56534895,p"> <img alt="alt msg" src="/b/s/b9/03/b9038292d147a582add07ee1f0607827.jpg"> </a> </div> <div class="desc"> <div class="l1"> <div class="icons"> </div> <table cellspacing="0" cellpadding="0" border="0"> <tbody> <tr> <td> <div class="fleft"> <a class="underline red bold" href="/searchClickThru?pid=prod56534895&amp;q=&amp;rpos=109181&amp;rpp=10&amp;_dyncharset=UTF-8&amp;sort=&amp;url=/culture-and-gender-intimate-relation-ksiazka,prod56534895,p"> Culture And Gender <br>Intimate Relation</a> </div> <div class="fleft"> </div> </td> </tr> </tbody> </table> </div> <div class="l2"> <div> </div> <div> <div class="but"> </div> </div> </div> <div class="l3"> Long description <a class="underlinepix_red no_wrap" rel="nofollow" href="/searchClickThru?pid=prod56534895&amp;q=&amp;rpos=109181&amp;rpp=10&amp;_dyncharset=UTF-8&amp;sort=&amp;url=/culture-and-gender-intimate-relation-ksiazka,prod56534895,p"> more<img alt="" src="/b/img/arr_red_sm.gif"> </a> </div> </div> </div> <div class="omit"></div> <div class="row "> <div class="photo"> <a rel="nofollow" href="/searchClickThru?pid=prod56534895&amp;q=&amp;rpos=109181&amp;rpp=10&amp;_dyncharset=UTF-8&amp;sort=&amp;url=/culture-and-gender-intimate-relation-ksiazka,prod56534899,p"> <img alt="alt msg" src="/b/s/b9/03/b9038292d147a582add07ee1f06078222.jpg"> </a> </div> <div class="desc"> <div class="l1"> <div class="icons"> </div> <table cellspacing="0" cellpadding="0" border="0"> <tbody> <tr> <td> <div class="fleft"> <a class="underline red bold" href="/searchClickThru?pid=prod56534895&amp;q=&amp;rpos=109181&amp;rpp=10&amp;_dyncharset=UTF-8&amp;sort=&amp;url=/culture-and-gender-intimate-relation-ksiazka,prod5653489225,p"> Culture And Gender <br>Intimate Relation</a> </div> <div class="fleft"> </div> </td> </tr> </tbody> </table> </div> <div class="l2"> <div> </div> <div> <div class="but"> </div> </div> </div> <div class="l3"> Long description <a class="underlinepix_red no_wrap" rel="nofollow" href="/searchClickThru?pid=prod56534895&amp;q=&amp;rpos=109181&amp;rpp=10&amp;_dyncharset=UTF-8&amp;sort=&amp;url=/culture-and-gender-intimate-relation-ksiazka,prod56534895,p"> more<img alt="" src="/b/img/arr_red_sm.gif"> </a> </div> </div> </div> Can anybody help me to create suitable reg ex?

    Read the article

  • Multiple calls to different page methods in same web page are not running in parallel (JQuery/Ajax/A

    - by Tony_Henrich
    I have several page methods defined in the code behind of an aspx page. I have several JS calls (see example below), one after the other, in the ready() method of JQuery to call these page methods. I noticed the javascript calls run asynchronously but the .NET page methods do not run in parallel. Page method 1 finishes first before page method 2 runs. Is there a way to get all the page methods to run all at the same time? My workaround is to put each method in its own aspx page or use iframes but I am looking for better solutions. $.ajax({ type: "POST", url: (page/methodname), data: "{}", contentType: "application/json; charset=utf-8", dataType: "json", success: function(msg) { .... } } });

    Read the article

  • Adding Login does not work. Error: "Cannot open database \ requested by the login. The login failed.\r\nLogin failed for user"

    - by Jacob Pressures
    I'm receiving this error message: Cannot open database \"Northwind\" requested by the login. The login failed.\r\nLogin failed for user 'Mike\Mike Simpson' When i try to add the user, which is me. Then sql server says Msg 15063, Level 16, State 1, Line 1 The login already has an account under a different user name. HEre is my connection string: "Data Source=Localhost;Initial Catalog=Northwind;Integrated Security=True" I'm using SSMS not SQL Server express I don't know what else I should do. This application used to work before i zipped it up. Thanks!

    Read the article

  • ASP.NET: Unable to automatically step into the server. The remote procedure could not be debugged.

    - by mark smith
    Hi there, can anyone help? I am having a problem stepping into code which is a website hosted on IIS7. Basically i have a test class which calls a WCF service like so ISecurityService service = new SecurityServiceClient(); MembershipUser membershipUser = null; membershipUser = service.GetMembershipUser("Mark"); // THIS LINE FAILS!!! I get the following error but i have everything enabled as far as i know i.e. <compilation debug="true" targetFramework="4.0" /> Here is the error msg, i would appreciated any feedback.. If I don't try and step into the line above then all works ok Microsoft Visual Studio Unable to automatically step into the server. The remote procedure could not be debugged. This usually indicates that debugging has not been enabled on the server. See help for more information. OK Help

    Read the article

  • Firefox Password script same PW auto login for 1000s devices Possible to use greasemonkey

    - by ritztech
    I currently work in a position that i have to manage and access 1000s of pages for troubleshooting and new setup.... and im trying to figure out a way for firefox or chrome to setup ANYtime it sees for instance a a web based page for equipment like (CISCO, Linksys, Sonicwall, T1 controllers) from the manufacture in the Title bar or from the originating page place a set up 2 - 3 passwords to auto log on with. 1st one of course being the most common so it logs in faster.. I access about 14 different web based products with passwords tied to each of them and if someway i can grab info stating that hey this company is cisco/sonicwall/linksys/hp/ log on with these set of 3-5 credintials. Using possible If then statements.... is that hard i saw some script files but not sure if its difficult because some apps use the MSG BOX built in feature and some use the form submit method built on the page unless i can have 2 different grease monkey scripts at the same time.... thanks.

    Read the article

  • creating Linq to sqlite dbml from DbLinq source code

    - by Veer
    Hi All, I tried to create linq-to-sqlite dbml using DbLinq but in vain. Each time I get different type of errors. May be I'm somewhere wrong. Can anyone tell me the step by step procedure to create the dbml file from the Dblinq source code. Edit: Steps I Followed: I downloaded the source file from this link. Edited the "run_sqliteMetal.bat" file in \\DbLinq-0.19\src\DbMetal folder as 'DbMetal.exe -database:myDb.db3 -namespace:myNS -code:myCode.cs' -dbml:myDbml.dbml Tried to run the DbMetal project file to produce the executable but there was a runtime error since Options object in Parameters.cs was null. Hence downloaded the readymade exe file from this location Copied it into the \DbLinq-0.19\src\DbMetal folder Executed the "run_sqliteMetal.bat" file I got a blank screen and Windows Error Msg "DbLinq has stopped Working" Any help? Thanks in advance, Veer

    Read the article

  • Jquery .ajax async postback on C# UserControl

    - by tnriverfish
    I'm working on adding a todo list to a project system and would like to have the todo creation trigger a async postback to update the database. I'd really like to host this in a usercontrol so I can drop the todo list onto a project page, task page or stand alone todo list page. Here's what I have. User Control "TodoList.ascx" which lives in the Controls directory. The script that sits at the top of the UserControl. You can see where I started building jsonText to postback but when that didn't work I just tried posting back an empty data variable and removed the 'string[] items' variable from the AddTodo2 method. <script type="text/javascript"> $(document).ready(function() { // Add the page method call as an onclick handler for the div. $("#divAddButton").click(function() { var jsonText = JSON.stringify({ tdlId: 1, description: "test test test" }); //data: jsonText, $.ajax({ type: "POST", url: "TodoList.aspx/AddTodo2", data: "{}", contentType: "application/json; charset=utf-8", dataType: "json", success: function(msg) { alert('retrieved'); $("#divAddButton").text(msg.d); }, error: function() { alert("error"); } }); }); });</script> The rest of the code on the ascx. <div class="divTodoList"> <asp:PlaceHolder ID="phTodoListCreate" runat="server"> <div class="divTLDetail"> <div>Description</div> <div><asp:TextBox ID="txtDescription" runat="server"></asp:TextBox></div> <div>Active</div> <div><asp:CheckBox ID="cbActive" runat="server" /></div> <div>Access Level</div> <div><asp:DropDownList ID="ddlAccessLevel" runat="server"></asp:DropDownList></div> </div> </asp:PlaceHolder> <asp:PlaceHolder ID="phTodoListDisplayHeader" runat="server"> <div id="divTLHeader"> <asp:HyperLink ID="hlHeader" runat="server"></asp:HyperLink> </div> </asp:PlaceHolder> <asp:PlaceHolder ID="phTodoListItems" runat="server"> <div class="divTLItems> <asp:Literal ID="litItems" runat="server"></asp:Literal> </div> </asp:PlaceHolder> <asp:PlaceHolder ID="phAddTodo" runat="server"> <div class="divTLAddItem"> <div id="divAddButton">Add Todo</div> <div id="divAddText"><asp:TextBox ID="txtNewTodo" runat="server"></asp:TextBox></div> </div> </asp:PlaceHolder> <asp:Label ID="lbTodoListId" runat="server" style="display:none;"></asp:Label></div> To test the idea I created a /TodoList.aspx page that lives in the root directory. <uc1:TodoList runat="server" ID="tdl1" TodoListId="1" ></uc1:TodoList> The cs for the todolist.aspx protected void Page_Load(object sender, EventArgs e) { SecurityManager sm = new SecurityManager(); sm.MemberLevelAccessCheck(MemberLevelKey.AreaAdmin); } public static string AddTodo2() { return "yea!"; } My hope is that I can have a control that can be used to display multiple todo lists and create a brand new todo list as well. When I click on the #divAddButton I can watch it build the postback in firebug but once it completes it runs the error portion by alerting 'error'. I can't see why. I'd really rather have the response method live inside the user control as well. Since I'll be dropping it on several pages to keep from having to go put a method on each individual page. Any help would be appreciated.

    Read the article

  • Not catching all mouse events with wxWidgets

    - by Stef
    Hi I am am trying to catch mouse movements for a MouseOver function in an app created with Code::Blocks using the wxSmith plugin. I have stumbled upon a puzzling problem. EVT_MOUSEWHEEL calling the function in the EventTable works well, but all other macros have no result at all. And the mousewheel is not really want I want (I just used it to test...) Here is a the basic problem code (mostly generated by the fantastic wxSmith plugin) MouseMain.h #include <wx/frame.h> #include <wx/statusbr.h> //*) class MouseFrame: public wxFrame { public: MouseFrame(wxWindow* parent,wxWindowID id = -1); virtual ~MouseFrame(); private: //(*Handlers(MouseFrame) void OnQuit(wxCommandEvent& event); void OnAbout(wxCommandEvent& event); void OnButton1Click(wxCommandEvent& event); void MouseOver(wxMouseEvent& event); //*) //(*Identifiers(MouseFrame) static const long ID_BUTTON1; static const long ID_STATICBITMAP1; static const long ID_PANEL1; static const long idMenuQuit; static const long idMenuAbout; static const long ID_STATUSBAR1; //*) //(*Declarations(MouseFrame) wxButton* Button1; wxStaticBitmap* StaticBitmap1; wxPanel* Panel1; wxStatusBar* StatusBar1; //*) DECLARE_EVENT_TABLE() }; #endif // MOUSEMAIN_H ...and MouseMain.cpp #include "wx_pch.h" #include "MouseMain.h" #include <wx/msgdlg.h> //(*InternalHeaders(MouseFrame) #include <wx/bitmap.h> #include <wx/intl.h> #include <wx/image.h> #include <wx/string.h> //*) //helper functions enum wxbuildinfoformat { short_f, long_f }; wxString wxbuildinfo(wxbuildinfoformat format) { wxString wxbuild(wxVERSION_STRING); if (format == long_f ) { #if defined(__WXMSW__) wxbuild << _T("-Windows"); #elif defined(__UNIX__) wxbuild << _T("-Linux"); #endif #if wxUSE_UNICODE wxbuild << _T("-Unicode build"); #else wxbuild << _T("-ANSI build"); #endif // wxUSE_UNICODE } return wxbuild; } //(*IdInit(MouseFrame) const long MouseFrame::ID_BUTTON1 = wxNewId(); const long MouseFrame::ID_STATICBITMAP1 = wxNewId(); const long MouseFrame::ID_PANEL1 = wxNewId(); const long MouseFrame::idMenuQuit = wxNewId(); const long MouseFrame::idMenuAbout = wxNewId(); const long MouseFrame::ID_STATUSBAR1 = wxNewId(); //*) BEGIN_EVENT_TABLE(MouseFrame,wxFrame) EVT_RIGHT_DCLICK(MouseFrame::MouseOver) EVT_MOUSEWHEEL(MouseFrame::MouseOver) EVT_MOTION(MouseFrame::MouseOver) EVT_RIGHT_DOWN(MouseFrame::MouseOver) //(*EventTable(MouseFrame) //*) END_EVENT_TABLE() MouseFrame::MouseFrame(wxWindow* parent,wxWindowID id) { //(*Initialize(MouseFrame) wxMenuItem* MenuItem2; wxMenuItem* MenuItem1; wxMenu* Menu1; wxMenuBar* MenuBar1; wxFlexGridSizer* FlexGridSizer1; wxMenu* Menu2; Create(parent, id, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxDEFAULT_FRAME_STYLE, _T("id")); Panel1 = new wxPanel(this, ID_PANEL1, wxPoint(144,392), wxDefaultSize, wxTAB_TRAVERSAL, _T("ID_PANEL1")); FlexGridSizer1 = new wxFlexGridSizer(0, 3, 0, 0); Button1 = new wxButton(Panel1, ID_BUTTON1, _("TheButton"), wxDefaultPosition, wxDefaultSize, 0, wxDefaultValidator, _T("ID_BUTTON1")); FlexGridSizer1->Add(Button1, 1, wxALL|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5); StaticBitmap1 = new wxStaticBitmap(Panel1, ID_STATICBITMAP1, wxNullBitmap, wxDefaultPosition, wxSize(159,189), wxSUNKEN_BORDER, _T("ID_STATICBITMAP1")); FlexGridSizer1->Add(StaticBitmap1, 1, wxALL|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5); Panel1->SetSizer(FlexGridSizer1); FlexGridSizer1->Fit(Panel1); FlexGridSizer1->SetSizeHints(Panel1); MenuBar1 = new wxMenuBar(); Menu1 = new wxMenu(); MenuItem1 = new wxMenuItem(Menu1, idMenuQuit, _("Quit\tAlt-F4"), _("Quit the application"), wxITEM_NORMAL); Menu1->Append(MenuItem1); MenuBar1->Append(Menu1, _("&File")); Menu2 = new wxMenu(); MenuItem2 = new wxMenuItem(Menu2, idMenuAbout, _("About\tF1"), _("Show info about this application"), wxITEM_NORMAL); Menu2->Append(MenuItem2); MenuBar1->Append(Menu2, _("Help")); SetMenuBar(MenuBar1); StatusBar1 = new wxStatusBar(this, ID_STATUSBAR1, 0, _T("ID_STATUSBAR1")); int __wxStatusBarWidths_1[1] = { -1 }; int __wxStatusBarStyles_1[1] = { wxSB_NORMAL }; StatusBar1->SetFieldsCount(1,__wxStatusBarWidths_1); StatusBar1->SetStatusStyles(1,__wxStatusBarStyles_1); SetStatusBar(StatusBar1); Connect(ID_BUTTON1,wxEVT_COMMAND_BUTTON_CLICKED,(wxObjectEventFunction)&MouseFrame::OnButton1Click); Connect(idMenuQuit,wxEVT_COMMAND_MENU_SELECTED,(wxObjectEventFunction)&MouseFrame::OnQuit); Connect(idMenuAbout,wxEVT_COMMAND_MENU_SELECTED,(wxObjectEventFunction)&MouseFrame::OnAbout); //*) } MouseFrame::~MouseFrame() { //(*Destroy(MouseFrame) //*) } void MouseFrame::OnQuit(wxCommandEvent& event) { Close(); } void MouseFrame::OnAbout(wxCommandEvent& event) { wxString msg = wxbuildinfo(long_f); wxMessageBox(msg, _("Welcome to...")); } void MouseFrame::OnButton1Click(wxCommandEvent& event) { } void MouseFrame::MouseOver(wxMouseEvent& event){ wxMessageBox(_("MouseOver event!")); } So my big question: Why are EVT_MOTION, EVT_RIGHT_DOWN or EVT_RIGHT_DCLICK not calling MouseFrame::MouseOver(wxMouseEvent& event) in the way EVT_MOUSEWHEEL does?

    Read the article

  • How does one check if a table exists in an Android SQLite database?

    - by camperdave
    I have an android app that needs to check if there's already a record in the database, and if not, process some things and eventually insert it, and simply read the data from the database if the data does exist. I'm using a subclass of SQLiteOpenHelper to create and get a rewritable instance of SQLiteDatabase, which I thought automatically took care of creating the table if it didn't already exist (since the code to do that is in the onCreate(...) method). However, when the table does NOT yet exist, and the first method ran upon the SQLiteDatabase object I have is a call to query(...), my logcat shows an error of "I/Database(26434): sqlite returned: error code = 1, msg = no such table: appdata", and sure enough, the appdata table isn't being created. Any ideas on why? I'm looking for either a method to test if the table exists (because if it doesn't, the data's certainly not in it, and I don't need to read it until I write to it, which seems to create the table properly), or a way to make sure that it gets created, and is just empty, in time for that first call to query(...)

    Read the article

  • Blackberry - Exception when sending SMS programmatically

    - by user213199
    Hello all, I am developing a Blackberry application. I am trying to send SMS programmatically to GSM number. I have gone through many queries and answers related to that and finally added the code for that as below. When the code tries to execute sending some text message to the particular mobile number, it doesn't send and throws exception as "blocking operation not permitted on event dispatch thread". So i created a separate background thread where i put the SMS code and running the code now. But still observing the same exception. Could someone please suggest what am i doing wrong (or) how to do that? class DummyFirst extends MainScreen { private Bitmap background; private VerticalFieldManager _container; private VerticalFieldManager mainVerticalManager; private HorizontalFieldManager horizontalFldManager; private BackGroundThread _thread; CustomControl buttonControl1; public DummyFirst() { super(); LabelField appTitle = new LabelField("Dummy App"); setTitle(appTitle); background = Bitmap.getBitmapResource("HomeBack.png"); _container = new VerticalFieldManager(Manager.NO_VERTICAL_SCROLL | Manager.NO_VERTICAL_SCROLLBAR) { protected void paint(Graphics g) { // Instead of these next two lines, draw your bitmap int y = DummyFirst.this.getMainManager() .getVerticalScroll(); g.clear(); g.drawBitmap(0, 0, background.getWidth(), background .getHeight(), background, 0, 0); super.paint(g); } protected void sublayout(int maxWidth, int maxHeight) { int width = background.getWidth(); int height = background.getHeight(); super.sublayout(width, height); setExtent(width, height); } }; mainVerticalManager = new VerticalFieldManager( Manager.NO_VERTICAL_SCROLL | Manager.NO_VERTICAL_SCROLLBAR) { protected void sublayout(int maxWidth, int maxHeight) { int width = background.getWidth(); int height = background.getHeight(); super.sublayout(width, height); setExtent(width, height); } }; HorizontalFieldManager horizontalFldManager = new HorizontalFieldManager(Manager.USE_ALL_WIDTH); buttonControl1 = new CustomControl("Send", ButtonField.CONSUME_CLICK, 83, 15); horizontalFldManager.add(buttonControl1); this.setStatus(horizontalFldManager); FieldListener listner = new FieldListener(); buttonControl1.setChangeListener(listner); _container.add(mainVerticalManager); this.add(_container); } class FieldListener implements FieldChangeListener { public void fieldChanged(Field f, int context) { if (f == buttonControl1) { _thread = new BackGroundThread(); _thread.start(); } } } private class BackGroundThread extends Thread { public BackGroundThread() { /*** initialize parameters in constructor *****/ } public void run() { // UiApplication.getUiApplication().invokeLater(new Runnable() UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { try { MessageConnection msgConn = (MessageConnection) Connector .open("sms://:0"); Message msg = msgConn .newMessage( MessageConnection.TEXT_MESSAGE); TextMessage txtMsg = (TextMessage) msg; String msgAdr = "sms://+919861348735"; txtMsg.setAddress(msgAdr); txtMsg.setPayloadText("Test Message"); // here exception is thrown msgConn.send(txtMsg); System.out.println("Sending" + " SMS success !!!"); } catch (Exception e) { System.out.println(e.getMessage()); e.printStackTrace(); } } // run }); } } public boolean onClose() { System.out.println("close event called, request to be" + " in the backgroud...."); UiApplication.getUiApplication().requestBackground(); return true; } } I resolved this issue by creating a separate thread and then not using Port etc. Here it is: SMSThread smsthread = new SMSThread("Some message",mobNumber); smsthread.start(); class SMSThread extends Thread { Thread myThread; MessageConnection msgConn; String message; String mobilenumber; public SMSThread( String textMsg, String mobileNumber ) { message = textMsg; mobilenumber = mobileNumber; } public void run() { try { msgConn = (MessageConnection) Connector.open("sms://+"+ mobilenumber); TextMessage text = (TextMessage) msgConn.newMessage(MessageConnection.TEXT_MESSAGE); text.setPayloadText(message); msgConn.send(text); msgConn.close(); } catch (Exception e) { System.out.println("Exception: " + e); } } }

    Read the article

  • OpenDataSource fails pls help

    - by Vivek Chandraprakash
    I'm trying export records from SQL Server 2008 to mdb file using OpenDataSource. It works when I log in using Windows authentication. But it fails when I use SQL Server authentication. This is the error i get OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "Could not delete from specified tables.". Msg 7320, Level 16, State 2, Procedure EXPORT_Employee, Line 110 Cannot execute the query "DELETE FROM employee_export " against OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)". Thanks -Vivek

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >