Search Results

Search found 19009 results on 761 pages for 'network shares'.

Page 52/761 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • Intermittent ethernet connectivity

    - by Amey Jah
    I am facing a weird problem. I am connecting to my dsl modem via ethernet. After booting, sometimes Ubuntu 10.10 does not detect the eth0 card properly or does not connect to the modem. I have made the following observations: My modem is fully on. All indicators are on except ethernet, which is blinking continuously. My network indicator applet informs me that I am connected to modem, but I am not able to browse as it has not established connection with modem. I need to power off and on (restart) the modem several times OR disconnect/connect (via network applet) several times, before the system can establish a connection with the modem. Once it establishes the connection, the ethernet LED (on modem) stops blinking and glows continuously. However, I do not see this problem every time I reboot or start my computer. 3/5 time, it connects to the modem in a single attempt. Friends, I am not able to understand root cause of this problem. Plus I do not know what kind of logs should be attached. If you want any logs please give me command to run, and I will paste the result for you. Note: I ran system testing when above problem happened. Follow this link to download result.

    Read the article

  • my application did not show toast mesage when network is not available [closed]

    - by Smart Guy
    my application did no show toast message when network is disable if (position == 2) { final ConnectivityManager connMgr = (ConnectivityManager) getSystemService(Context.CONNECTIVITY_SERVICE); NetworkInfo activeNetworkInfo = connMgr .getActiveNetworkInfo(); android.net.NetworkInfo mobile1 = connMgr.getNetworkInfo(ConnectivityManager.TYPE_MOBILE); if (activeNetworkInfo == null) { Toast.makeText(LoginScreen.this, "No Active Network",Toast.LENGTH_LONG).show(); } else { if (activeNetworkInfo.isConnected()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { String pinemptycheck = pin.getText().toString(); String mobileemptycheck = mobile.getText().toString(); if (pinemptycheck.trim().equals("")||(mobileemptycheck.trim().equals(""))) { Toast.makeText(getApplicationContext(), "Please Enter Correct Information", Toast.LENGTH_LONG).show(); } else { showProgress(); postLoginData(); } } }); } else if (activeNetworkInfo.isConnectedOrConnecting()) { Toast.makeText(LoginScreen.this, "network is Connecting", Toast.LENGTH_LONG) .show(); else if (mobile1.isAvailable()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { showProgress(); postLoginData(); } }); } else if (!mobile1.isAvailable()) { Toast.makeText(LoginScreen.this,"No other Connection Found ",Toast.LENGTH_LONG).show(); btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View v) { Toast.makeText(LoginScreen.this," No other Connection Found", Toast.LENGTH_LONG).show(); } }); }}}

    Read the article

  • set tap0 using virt-manager for bridged wireless

    - by DaveO
    After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

    Read the article

  • Network: Incoming connections work, outgoing fails

    - by anirvan
    i recently set up my own server at home to run Ubuntu 12.04 server ed. on booting up, i noticed that a message related to networking comes up, and the booting process pauses. the message read something like - waiting for network configuration and after a while - waiting another 60 seconds... on booting up, I realised that any command which requires a network connection was not working - ping, apt-get install, etc. on firing the ifup eth0 command, I get the error RTNETLINK answers: File exists. Failed to bring up eth0. I also realised, while searching the web for this problem, that this is probably one of the most common networking related issues - however, most of the questions are around setting up multiple IPs for the same machine. ifdown eth0 also fails, stating that eth0 is not configured. my /etc/network/interfaces file has a simple configuration for a static IP: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask xx.xx.xx.xx broadcast xx.xx.xx.xx gateway xx.xx.xx.xx dns-nameservers xx.xx.xx.xx The strangest part of this problem is that, while I can't connect to anything outside, I can ping to this particular server using the static IP configured in the interface file, and, i can even SSH into it! I'm really at ends here with this problem, and any guidance is much appreciated. Thanks!

    Read the article

  • How do I connect to a wireless network?

    - by Keith Groben
    I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

    Read the article

  • Lost connectivity after configuring multiple network adapters on separate networks

    - by Dave Long
    I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

    Read the article

  • Network(ing) to the Limit

    - by Oracle OpenWorld Blog Team
     By Karen Shamban While Oracle OpenWorld attendees are networking, there's an Oracle Global IT team that builds and maintains the massive networks that help run the show. The objective? To keep things running as seamlessly and smoothly as possible, constantly evaluate priorities, mitigate risk, and be ready for whatever might happen -- because things do happen when there are 50,000 plus attendees, tens of thousands of devices, unexpected requirements, and a constant flow of up-to-the-minute information. Here's just some of what it takes to keep the conference going, network style: 100 Oracle network, voice, and desktop engineers; security, risk management, and other IT experts, who come in from 17 countries  1000+ network switches 300+ miles of copper and fiber 485 wireless access points 2,500 wired laptops 300 VoIP phones And just where are all these networks and devices deployed? This is what the team had to build and manage: Moscone North, South, and West, including: The keynote hall Oracle DEMOgrounds in the Exhibition Halls Hundreds of session rooms Connection Centers, Social Avenue, Lounges Registration The Howard Street Tent and Taylor Street Cafe tented venues Oracle Square (Union Square) Yerba Buena Gardens Masonic Auditorium Sessions and demos at 8 hotel venues That's a whole lot of networking going on. And here's the kicker: the team has only 4 days to bring get it all up and running across these many venues, and exactly 12 hours to take it all down once the show ends. The Global IT team puts in the equivalent of 152 24-hour days for set-up, 227 24-hour days of support during the conferences, and then tears it all down in about 20 24-hour days. And in case you were wondering, the planning for next year's Oracle OpenWorld starts ... next week. No rest for the weary.  Now THAT's networking!  So hats off to the Global IT team -- the job ain't easy, but somebody's got to do it, and they do it remarkably well.

    Read the article

  • Network/browser issues after upgrade to 12.04

    - by Reg
    I let my laptop upgrade to 12.04. And have no network afterwards. I went through all the articles I could find in google. Right now, I can ping google, and yahoo, but not cnn.com for example or anything else. Firefox says it can't reach google.com or gmail.com (or anything, not even IP. /etc/network/interfaces dns-nameservers 8.8.8.8 <<<<<added auto lo iface lo inet loopback /etc/dhcp/dhclient.conf #prepend domain-name-servers 8.8.8.8,8.8.4.4; prepend domain-name-servers 127.0.0.1; <<<<< tried both /etc/NetworkManager/NetworkManager.conf with and without dns=dnsmasq commented out. I can ping my wireless router and connect to it just fine. Have tried proxy/noproxy. This looks like After Upgrade to 12.04 - cannot connect to network but no answer there. I would hate to do a fresh install. Any assistance appreciated.

    Read the article

  • Scripting with the Sun ZFS Storage 7000 Appliance

    - by Geoff Ongley
    The Sun ZFS Storage 7000 appliance has a user friendly and easy to understand graphical web based interface we call the "BUI" or "Browser User Interface".This interface is very useful for many tasks, but in some cases a script (or workflow) may be more appropriate, such as:Repetitive tasksTasks which work on (or obtain information about) a large number of shares or usersTasks which are triggered by an alert threshold (workflows)Tasks where you want a only very basic input, but a consistent output (workflows)The appliance scripting language is based on ECMAscript 3 (close to javascript). I'm not going to cover ECMAscript 3 in great depth (I'm far from an expert here), but I would like to show you some neat things you can do with the appliance, to get you started based on what I have found from my own playing around.I'm making the assumption you have some sort of programming background, and understand variables, arrays, functions to some extent - but of course if something is not clear, please let me know so I can fix it up or clarify it.Variable Declarations and ArraysVariablesECMAScript is a dynamically and weakly typed language. If you don't know what that means, google is your friend - but at a high level it means we can just declare variables with no specific type and on the fly.For example, I can declare a variable and use it straight away in the middle of my code, for example:projects=list();Which makes projects an array of values that are returned from the list(); function (which is usable in most contexts). With this kind of variable, I can do things like:projects.length (this property on array tells you how many objects are in it, good for for loops etc). Alternatively, I could say:projects=3;and now projects is just a simple number.Should we declare variables like this so loosely? In my opinion, the answer is no - I feel it is a better practice to declare variables you are going to use, before you use them - and given them an initial value. You can do so as follows:var myVariable=0;To demonstrate the ability to just randomly assign and change the type of variables, you can create a simple script at the cli as follows (bold for input):fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("Number of projects is: %d\n",projects.length);("." to run)> projects=152;("." to run)> printf("Value of the projects variable as an integer is now: %d\n",projects);("." to run)> .Number of projects is: 7Value of the projects variable as an integer is now: 152You can also confirm this behaviour by checking the typeof variable we are dealing with:fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> projects=152;("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> .var projects is of type objectvar projects is of type numberArraysSo you likely noticed that we have already touched on arrays, as the list(); (in the shares context) stored an array into the 'projects' variable.But what if you want to declare your own array? Easy! This is very similar to Java and other languages, we just instantiate a brand new "Array" object using the keyword new:var myArray = new Array();will create an array called "myArray".A quick example:fishy10:> script("." to run)> testArray = new Array();("." to run)> testArray[0]="This";("." to run)> testArray[1]="is";("." to run)> testArray[2]="just";("." to run)> testArray[3]="a";("." to run)> testArray[4]="test";("." to run)> for (i=0; i < testArray.length; i++)("." to run)> {("." to run)>    printf("Array element %d is %s\n",i,testArray[i]);("." to run)> }("." to run)> .Array element 0 is ThisArray element 1 is isArray element 2 is justArray element 3 is aArray element 4 is testWorking With LoopsFor LoopFor loops are very similar to those you will see in C, java and several other languages. One of the key differences here is, as you were made aware earlier, we can be a bit more sloppy with our variable declarations.The general way you would likely use a for loop is as follows:for (variable; test-case; modifier for variable){}For example, you may wish to declare a variable i as 0; and a MAX_ITERATIONS variable to determine how many times this loop should repeat:var i=0;var MAX_ITERATIONS=10;And then, use this variable to be tested against some case existing (has i reached MAX_ITERATIONS? - if not, increment i using i++);for (i=0; i < MAX_ITERATIONS; i++){ // some work to do}So lets run something like this on the appliance:fishy10:> script("." to run)> var i=0;("." to run)> var MAX_ITERATIONS=10;("." to run)> for (i=0; i < MAX_ITERATIONS; i++)("." to run)> {("." to run)>    printf("The number is %d\n",i);("." to run)> }("." to run)> .The number is 0The number is 1The number is 2The number is 3The number is 4The number is 5The number is 6The number is 7The number is 8The number is 9While LoopWhile loops again are very similar to other languages, we loop "while" a condition is met. For example:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)>    if (counter==10) ("." to run)>    { ("." to run)>            isTen=true;   ("." to run)>    } ("." to run)>    printf("Counter is %d\n",counter);("." to run)>    counter++;    ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n",counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Counter is 10Loop has ended and Counter is 11So what do we notice here? Something has actually gone wrong - counter will technically be 11 once the loop completes... Why is this?Well, if we have a loop like this, where the 'while' condition that will end the loop may be set based on some other condition(s) existing (such as the counter has reached 10) - we must ensure that we  terminate this iteration of the loop when the condition is met - otherwise the rest of the code will be followed which may not be desirable. In other words, like in other languages, we will only ever check the loop condition once we are ready to perform the next iteration, so any other code after we set "isTen" to be true, will still be executed as we can see it was above.We can avoid this by adding a break into our loop once we know we have set the condition - this will stop the rest of the logic being processed in this iteration (and as such, counter will not be incremented). So lets try that again:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)>    if (counter==10) ("." to run)>    { ("." to run)>            isTen=true;   ("." to run)>            break;("." to run)>    } ("." to run)>    printf("Counter is %d\n",counter);("." to run)>    counter++;    ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n", counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Loop has ended and Counter is 10Much better!Methods to Obtain and Manipulate DataGet MethodThe get method allows you to get simple properties from an object, for example a quota from a user. The syntax is fairly simple:var myVariable=get('property');An example of where you may wish to use this, is when you are getting a bunch of information about a user (such as quota information when in a shares context):var users=list();for(k=0; k < users.length; k++){     user=users[k];     run('select ' + user);     var username=get('name');     var usage=get('usage');     var quota=get('quota');...Which you can then use to your advantage - to print or manipulate infomation (you could change a user's information with a set method, based on the information returned from the get method). The set method is explained next.Set MethodThe set method can be used in a simple manner, similar to get. The syntax for set is:set('property','value'); // where value is a string, if it was a number, you don't need quotesFor example, we could set the quota on a share as follows (first observing the initial value):fishy10:shares default/test-geoff> script("." to run)> var currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> set('quota','30G');("." to run)> run('commit');("." to run)> currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> .Current Quota is: 0Current Quota is: 32212254720This shows us using both the get and set methods as can be used in scripts, of course when only setting an individual share, the above is overkill - it would be much easier to set it manually at the cli using 'set quota=3G' and then 'commit'.List MethodThe list method can be very powerful, especially in more complex scripts which iterate over large amounts of data and manipulate it if so desired. The general way you will use list is as follows:var myVar=list();Which will make "myVar" an array, containing all the objects in the relevant context (this could be a list of users, shares, projects, etc). You can then gather or manipulate data very easily.We could list all the shares and mountpoints in a given project for example:fishy10:shares another-project> script("." to run)> var shares=list();("." to run)> for (i=0; i < shares.length; i++)("." to run)> {("." to run)>    run('select ' + shares[i]);("." to run)>    var mountpoint=get('mountpoint');("." to run)>    printf("Share %s discovered, has mountpoint %s\n",shares[i],mountpoint);("." to run)>    run('done');("." to run)> }("." to run)> .Share and-another discovered, has mountpoint /export/another-project/and-anotherShare another-share discovered, has mountpoint /export/another-project/another-shareShare bob discovered, has mountpoint /export/another-projectShare more-shares-for-all discovered, has mountpoint /export/another-project/more-shares-for-allShare yep discovered, has mountpoint /export/another-project/yepWriting More Complex and Re-Usable CodeFunctionsThe best way to be able to write more complex code is to use functions to split up repeatable or reusable sections of your code. This also makes your more complex code easier to read and understand for other programmers.We write functions as follows:function functionName(variable1,variable2,...,variableN){}For example, we could have a function that takes a project name as input, and lists shares for that project (assuming we're already in the 'project' context - context is important!):function getShares(proj){        run('select ' + proj);        shares=list();        printf("Project: %s\n", proj);        for(j=0; j < shares.length; j++)        {                printf("Discovered share: %s\n",shares[i]);        }        run('done'); // exit selected project}Commenting your CodeLike any other language, a large part of making it readable and understandable is to comment it. You can use the same comment style as in C and Java amongst other languages.In other words, sngle line comments use://at the beginning of the comment.Multi line comments use:/*at the beginning, and:*/ at the end.For example, here we will use both:fishy10:> script("." to run)> // This is a test comment("." to run)> printf("doing some work...\n");("." to run)> /* This is a multi-line("." to run)> comment which I will span across("." to run)> three lines in total */("." to run)> printf("doing some more work...\n");("." to run)> .doing some work...doing some more work...Your comments do not have to be on their own, they can begin (particularly with single line comments this is handy) at the end of a statement, for examplevar projects=list(); // The variable projects is an array containing all projects on the system.Try and Catch StatementsYou may be used to using try and catch statements in other languages, and they can (and should) be utilised in your code to catch expected or unexpected error conditions, that you do NOT wish to stop your code from executing (if you do not catch these errors, your script will exit!):try{  // do some work}catch(err) // Catch any error that could occur{ // do something here under the error condition}For example, you may wish to only execute some code if a context can be reached. If you can't perform certain actions under certain circumstances, that may be perfectly acceptable.For example if you want to test a condition that only makes sense when looking at a SMB/NFS share, but does not make sense when you hit an iscsi or FC LUN, you don't want to stop all processing of other shares you may not have covered yet.For example we may wish to obtain quota information on all shares for all users on a share (but this makes no sense for a LUN):function getShareQuota(shar) // Get quota for each user of this share{        run('select ' + shar);        printf("  SHARE: %s\n", shar);        try        {                run('users');                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","----");                                users=list();                for(k=0; k < users.length; k++)                {                        user=users[k];                        getUserQuota(user);                }                run('done'); // exit user context        }        catch(err)        {                printf("    SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar);        }        run('done'); // done with this share}Running Scripts Remotely over SSHAs you have likely noticed, writing and running scripts for all but the simplest jobs directly on the appliance is not going to be a lot of fun.There's a couple of choices on what you can do here:Create scripts on a remote system and run them over sshCreate scripts, wrapping them in workflow code, so they are stored on the appliance and can be triggered under certain circumstances (like a threshold being reached)We'll cover the first one here, and then cover workflows later on (as these are for the most part just scripts with some wrapper information around them).Creating a SSH Public/Private SSH Key PairLog on to your handy Solaris box (You wouldn't be using any other OS, right? :P) and use ssh-keygen to create a pair of ssh keys. I'm storing this separate to my normal key:[geoff@lightning ~] ssh-keygen -t rsa -b 1024Generating public/private rsa key pair.Enter file in which to save the key (/export/home/geoff/.ssh/id_rsa): /export/home/geoff/.ssh/nas_key_rsaEnter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /export/home/geoff/.ssh/nas_key_rsa.Your public key has been saved in /export/home/geoff/.ssh/nas_key_rsa.pub.The key fingerprint is:7f:3d:53:f0:2a:5e:8b:2d:94:2a:55:77:66:5c:9b:14 geoff@lightningInstalling the Public Key on the ApplianceOn your Solaris host, observe the public key:[geoff@lightning ~] cat .ssh/nas_key_rsa.pub ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc= geoff@lightningNow, copy and paste everything after "ssh-rsa" and before "user@hostname" - in this case, geoff@lightning. That is, this bit:AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc=Logon to your appliance and get into the preferences -> keys area for this user (root):[geoff@lightning ~] ssh [email protected]: Last login: Mon Dec  6 17:13:28 2010 from 192.168.0.2fishy10:> configuration usersfishy10:configuration users> select rootfishy10:configuration users root> preferences fishy10:configuration users root preferences> keysOR do it all in one hit:fishy10:> configuration users select root preferences keysNow, we create a new public key that will be accepted for this user and set the type to RSA:fishy10:configuration users root preferences keys> createfishy10:configuration users root preferences key (uncommitted)> set type=RSASet the key itself using the string copied previously (between ssh-rsa and user@host), and set the key ensuring you put double quotes around it (eg. set key="<key>"):fishy10:configuration users root preferences key (uncommitted)> set key="AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc="Now set the comment for this key (do not use spaces):fishy10:configuration users root preferences key (uncommitted)> set comment="LightningRSAKey" Commit the new key:fishy10:configuration users root preferences key (uncommitted)> commitVerify the key is there:fishy10:configuration users root preferences keys> lsKeys:NAME     MODIFIED              TYPE   COMMENT                                  key-000  2010-10-25 20:56:42   RSA    cycloneRSAKey                           key-001  2010-12-6 17:44:53    RSA    LightningRSAKey                         As you can see, we now have my new key, and a previous key I have created on this appliance.Running your Script over SSH from a Remote SystemHere I have created a basic test script, and saved it as test.ecma3:[geoff@lightning ~] cat test.ecma3 script// This is a test script, By Geoff Ongley 2010.printf("Testing script remotely over ssh\n");.Now, we can run this script remotely with our keyless login:[geoff@lightning ~] ssh -i .ssh/nas_key_rsa root@fishy10 < test.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Testing script remotely over sshPutting it Together - An Example Completed Quota Gathering ScriptSo now we have a lot of the basics to creating a script, let us do something useful, like, find out how much every user is using, on every share on the system (you will recognise some of the code from my previous examples): script/************************************** Quick and Dirty Quota Check script ** Written By Geoff Ongley            ** 25 October 2010                    **************************************/function getUserQuota(usr){        run('select ' + usr);        var username=get('name');        var usage=get('usage');        var quota=get('quota');        var usage_g=usage / 1073741824; // convert bytes to gigabytes        var quota_g=quota / 1073741824; // as above        var quota_percent=0        if (quota > 0)        {                quota_percent=(usage / quota)*(100/1);        }        printf("    %20s        %8.2f           %8.2f           %d%%\n",username,usage_g,quota_g,quota_percent);        run('done'); // done with this selected user}function getShareQuota(shar){        //printf("DEBUG: selecting share %s\n", shar);        run('select ' + shar);        printf("  SHARE: %s\n", shar);        try        {                run('users');                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","--------");                                users=list();                for(k=0; k < users.length; k++)                {                        user=users[k];                        getUserQuota(user);                }                run('done'); // exit user context        }        catch(err)        {                printf("    SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar);        }        run('done'); // done with this share}function getShares(proj){        //printf("DEBUG: selecting project %s\n",proj);        run('select ' + proj);        shares=list();        printf("Project: %s\n", proj);        for(j=0; j < shares.length; j++)        {                share=shares[j];                getShareQuota(share);        }        run('done'); // exit selected project}function getProjects(){        run('cd /');        run('shares');        projects=list();                for (i=0; i < projects.length; i++)        {                var project=projects[i];                getShares(project);        }        run('done'); // exit context for all projects}getProjects();.Which can be run as follows, and will print information like this:[geoff@lightning ~/FISHWORKS_SCRIPTS] ssh -i ~/.ssh/nas_key_rsa root@fishy10 < get_quota_utilisation.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Project: another-project  SHARE: and-another                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                  nobody            0.00            0.00        0%                 geoffro            0.05            0.00        0%                   Billy            0.10            0.00        0%                    root            0.00            0.00        0%            testing-user            0.05            0.00        0%  SHARE: another-share                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                    root            0.00            0.00        0%                  nobody            0.00            0.00        0%                 geoffro            0.05            0.49        9%            testing-user            0.05            0.02        249%                   Billy            0.10            0.29        33%  SHARE: bob                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                  nobody            0.00            0.00        0%                    root            0.00            0.00        0%  SHARE: more-shares-for-all                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                   Billy            0.10            0.00        0%            testing-user            0.05            0.00        0%                  nobody            0.00            0.00        0%                    root            0.00            0.00        0%                 geoffro            0.05            0.00        0%  SHARE: yep                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                    root            0.00            0.00        0%                  nobody            0.00            0.00        0%                   Billy            0.10            0.01        999%            testing-user            0.05            0.49        9%                 geoffro            0.05            0.00        0%Project: default  SHARE: Test-LUN    SKIPPING Test-LUN - This is NOT a NFS or CIFs share, not looking for users  SHARE: test-geoff                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                 geoffro            0.05            0.00        0%                    root            3.18           10.00        31%                    uucp            0.00            0.00        0%                  nobody            0.59            0.49        119%^CKilled by signal 2.Creating a WorkflowWorkflows are scripts that we store on the appliance, and can have the script execute either on request (even from the BUI), or on an event such as a threshold being met.Workflow BasicsA workflow allows you to create a simple process that can be executed either via the BUI interface interactively, or by an alert being raised (for some threshold being reached, for example).The basics parameters you will have to set for your "workflow object" (notice you're creating a variable, that embodies ECMAScript) are as follows (parameters is optional):name: A name for this workflowdescription: A Description for the workflowparameters: A set of input parameters (useful when you need user input to execute the workflow)execute: The code, the script itself to execute, which will be function (parameters)With parameters, you can specify things like this (slightly modified sample taken from the System Administration Guide):          ...parameters:        variableParam1:         {                             label: 'Name of Share',                             type: 'String'                  },                  variableParam2                  {                             label: 'Share Size',                             type: 'size'                  },execute: ....};  Note the commas separating the sections of name, parameters, execute, and so on. This is important!Also - there is plenty of properties you can set on the parameters for your workflow, these are described in the Sun ZFS Storage System Administration Guide.Creating a Basic Workflow from a Basic ScriptTo make a basic script into a basic workflow, you need to wrap the following around your script to create a 'workflow' object:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function() {// (basic script goes here, minus the "script" at the beginning, and "." at the end)}};However, it appears (at least in my experience to date) that the workflow object may only be happy with one function in the execute parameter - either that or I'm doing something wrong. As far as I can tell, after execute: you should only have a basic one function context like so:execute: function(){}To deal with this, and to give an example similar to our script earlier, I have created another simple quota check, to show the same basic functionality, but in a workflow format:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function () {        run('cd /');        run('shares');        projects=list();                for (i=0; i < projects.length; i++)        {                run('select ' + projects[i]);                shares=list('filesystem');                printf("Project: %s\n", projects[i]);                for(j=0; j < shares.length; j++)                {                        run('select ' +shares[j]);                        try                        {                                run('users');                                printf("  SHARE: %s\n", shares[j]);                                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","-------");                                users=list();                                for(k=0; k < users.length; k++)                                {                                        run('select ' + users[k]);                                        username=get('name');                                        usage=get('usage');                                        quota=get('quota');                                        usage_g=usage / 1073741824; // convert bytes to gigabytes                                        quota_g=quota / 1073741824; // as above                                        quota_percent=0                                        if (quota > 0)                                        {                                                quota_percent=(usage / quota)*(100/1);                                        }                                        printf("    %20s        %8.2f   %8.2f   %d%%\n",username,usage_g,quota_g,quota_percent);                                        run('done');                                }                                run('done'); // exit user context                        }                        catch(err)                        {                        //      printf("    %s is a LUN, Not looking for users\n", shares[j]);                        }                        run('done'); // exit selected share context                }                run('done'); // exit project context        }        }};SummaryThe Sun ZFS Storage 7000 Appliance offers lots of different and interesting features to Sun/Oracle customers, including the world renowned Analytics. Hopefully the above will help you to think of new creative things you could be doing by taking advantage of one of the other neat features, the internal scripting engine!Some references are below to help you continue learning more, I'll update this post as I do the same! Enjoy...More information on ECMAScript 3A complete reference to ECMAScript 3 which will help you learn more of the details you may be interested in, can be found here:http://www.ecma-international.org/publications/files/ECMA-ST-ARCH/ECMA-262,%203rd%20edition,%20December%201999.pdfMore Information on Administering the Sun ZFS Storage 7000The Sun ZFS Storage 7000 System Administration guide can be a useful reference point, and can be found here:http://wikis.sun.com/download/attachments/186238602/2010_Q3_2_ADMIN.pdf

    Read the article

  • How to get ISA 2006 Web Proxy to work with the Single Network Adapter template

    - by tronda
    I need to test an issue with running our application behind a proxy server with different type of configurations, so I installed ISA 2006 Enterprise on a desktop computer. Since this computer only has a single network card and I want to start out easy, I chose the "Single Network Adapter" template. We have a internal NAT'ed network which is in the 10 range. I have defined the internal network on the ISA server to be 10.XXX.YY.1 - 10.XXX.YY.255 I also have the Default rule which denies all traffic, but I've added the following Rule: Policy - Protocols - From - To Accept HTTP Internal External HTTPS Local Host Internal HTTS Server Localhost Then I configured Internet Explorer on a virutal machine running XP within virtualbox with Brigded network (gets same network address range as regular computers on our network) similar to this Instead of the server name I used the IP address. When I try to access a web page, this doesn't go through and I get the following log messages on the proxy server: Original Client IP Client Agent Authenticated Client Service Referring Server Destination Host Name Transport HTTP Method MIME Type Object Source Source Proxy Destination Proxy Bidirectional Client Host Name Filter Information Network Interface Raw IP Header Raw Payload GMT Log Time Source Port Processing Time Bytes Sent Bytes Received Cache Information Error Information Authentication Server Log Time Client IP Destination IP Destination Port Protocol Action Rule Result Code HTTP Status Code Client Username Source Network Destination Network URL Server Name Log Record Type 10.XXX.YY.174 - TCP - - - 24.08.2010 13:25:24 1080 0 0 0 0x0 0x0 - 24.08.2010 06:25:24 10.XXX.YY.174 10.XXX.YY.175 80 HTTP Initiated Connection MyHTTPAccess 0x0 ERROR_SUCCESS Internal Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:24 2275 0 0 0 0x0 0x0 - 24.08.2010 06:25:24 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:25 2275 0 0 0 0x0 0x0 - 24.08.2010 06:25:25 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:25 2276 0 0 0 0x0 0x0 - 24.08.2010 06:25:25 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:26 2276 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:26 2277 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.159 - UDP - - - 24.08.2010 13:25:26 68 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.159 255.255.255.255 67 DHCP (request) Denied Connection [Enterprise] Default rule 0xc004000d FWX_E_POLICY_RULES_DENIED Internal Local Host - PROXYTEST Firewall 10.XXX.YY.166 - UDP - - - 24.08.2010 13:25:26 68 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.166 255.255.255.255 67 DHCP (request) Denied Connection [Enterprise] Default rule 0xc004000d FWX_E_POLICY_RULES_DENIED Internal Local Host - PROXYTEST Firewall 0.0.0.0 Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Yes Proxy 10.XXX.YY.175 TCP GET Internet - - - Req ID: 096c76ae; Compression: client=No, server=No, compress rate=0% decompress rate=0% - - - 24.08.2010 13:25:27 0 2945 2581 446 0x0 0x40 24.08.2010 06:25:27 10.XXX.YY.174 10.XXX.YY.175 80 http Failed Connection Attempt MyHTTPAccess 10061 anonymous Internal Local Host http://www.vg.no/ PROXYTEST Web Proxy Filter 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:27 2277 0 0 0 0x0 0x0 - 24.08.2010 06:25:27 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall

    Read the article

  • Oracle Social Network and the Flying Monkey Smart Target

    - by kellsey.ruppel
    Originally posted by Jake Kuramoto on The Apps Lab blog. I teased this before OpenWorld, and for those of you who didn’t make it to the show or didn’t come by the Office Hours to take the Oracle Social Network Technical Tour Noel (@noelportugal) ran, I give you the Flying Monkey Smart Target. In brief, Noel built a target, about two feet tall, which when struck, played monkey sounds and posted a comment to an Oracle Social Network Conversation, all controlled by a Raspberry Pi. He also connected a Dropcam to record the winner just prior to the strike. I’m not sure how it all works, but maybe Noel can post the technical specifics. Here’s Noel describing the Challenge, the Target and a few other tidbit in an interview with Friend of the ‘Lab, Bob Rhubart (@brhubart). The monkey target bits are 2:12-2:54 if you’re into brevity, but watch the whole thing. Here are some screen grabs from the Oracle Social Network Conversation, including the Conversation itself, where you can see all the strikes documented, the picture captured, and the annotation capabilities: #gallery-1 { margin: auto;? } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; }    That’s Diego in one shot, looking very focused, and Ernst in the other, who kindly annotated himself, two of the development team members. You might have seen them in the Oracle Social Network Hands-On Lab during the show. There’s a trend here. Not by accident, fun stuff like this has becoming our calling card, e.g. the Kscope 12 WebCenter Rock ‘em Sock ‘em Robots. Not only are these entertaining demonstrations, but they showcase what’s possible with RESTful APIs and get developers noodling on how easy it is to connect real objects to cloud services to fix pain points. I spoke to some great folks from the City of Atlanta about extending the concepts of the flying monkey target to physical asset monitoring. Just take an internet-connected camera with REST APIs like the Dropcam, wire it up to Oracle Social Netwok, and you can hack together a monitoring device for a datacenter or a warehouse. Sure, it’s easier said than done, but we’re a lot closer to that reality than we were even two years ago. Another noteworthy bit from Noel’s interview, beginning at 2:55, is the evolution of social developer. Speaking of, make sure to check out the Oracle Social Developer Community. Look for more on the social developer in the coming months. Noel has become quite the Raspberry Pi evangelist, and why not, it’s a great tool, a low-power Linux machine, cheap ($35!) and highly extensible, perfect for makers and students alike. He attended a meetup on Saturday before OpenWorld, and during the show, I heard him evangelizing the Pi and its capabilities to many people. There is some fantastic innovation forming in that ecosystem, much of it with Java. The OTN gang raffled off five Pis, and I expect to see lots of great stuff in the very near future. Stay tuned this week for posts on all our Challenge entrants. There’s some great innovation you won’t want to miss. Find the comments. Update: I forgot to mention that Noel used Twilio, one of his favorite services, during the show to send out Challenge updates and information to all the contestants.

    Read the article

  • Windows Server Hyper-V guests cannot see each other on network

    - by Noldorin
    I have a Hyper-V physical machine along with two standard laptops running within my LAN (connected by an ASUS-RT56U router). The physical server runs Windows Hyper-V Server 2008 R2, with two Windows Server 2008 R2 (full) guest VMs installed and running within. Both laptops run Windows 7. All OSs are 64-bit. Opening up Network in Windows Explorer on either of the two laptops displays both of the laptops in the LAN fine. However, neither of the guest VMs on the server (nor the host itself) are displayed. Indeed, the guest VMs can not see each other in Network view either. I can ping all computers (laptops and servers) without problems from within the LAN, but all of the servers are simply not visible from anywhere. In addition, the Network Map screen (accessible via Network and Sharing centre) gives me an error message: "An error happened during the mapping process." And I'm suspecting this might have something to do with how LLTP (Link Layer Topology Protocol) is working on the network. Worth noting though is that before my server was on the network, the Network Map screen displayed fine (as far as I can remember).

    Read the article

  • Windows Server Hyper-V guests cannot see each other on network

    - by Noldorin
    I have a Hyper-V physical machine along with two standard laptops running within my LAN (connected by an ASUS-RT56U router). The physical server runs Windows Hyper-V Server 2008 R2, with two Windows Server 2008 R2 (full) guest VMs installed and running within. Both laptops run Windows 7. All OSs are 64-bit. Opening up Network in Windows Explorer on either of the two laptops displays both of the laptops in the LAN fine. However, neither of the guest VMs on the server (nor the host itself) are displayed. Indeed, the guest VMs can not see each other in Network view either. I can ping all computers (laptops and servers) without problems from within the LAN, but all of the servers are simply not visible from anywhere. In addition, the Network Map screen (accessible via Network and Sharing centre) gives me an error message: "An error happened during the mapping process." And I'm suspecting this might have something to do with how LLTP (Link Layer Topology Protocol) is working on the network. Worth noting though is that before my server was on the network, the Network Map screen displayed fine (as far as I can remember).

    Read the article

  • How can one setup a version control system on a local network, without a server?

    - by Andrew
    Edit: Ok so I learned that I guess I need an distributed source control, however are there any UI based ones, and do they allow you to merge with other users on the network? This is kind of a two part question, so here it goes. I want to start developing a web application at home (with multiple developers). However, I don't have a dedicated server nor want to pay for on. So first, I don't know which version control system to use for this case, as at work we mostly have TFS setup, so I am not to familiar with whats out there. What are the best free CVS/SVN tools out there? Second, is it possible to somehow setup the CVS/SVN where there is no dedicated server and both clients store up to one week of the source code from the last check-in? Also, it would be helpful if it could integrate with visual studio, again this isn't that important at all. Problem: There are Five users, one is a Server. Server Connected: All Ok Server Disconnected: No one can share. What I am looking for: No Server: Users still have versioning based on version id of last check-in. Users must check all version on network to make sure they aren't outdated based on their last version id. If not check-in, otherwise merge/get latest. If they are update checkin, and set current version id +1.

    Read the article

  • Windows XP can't connect to wireless network

    - by mikez302
    I have a desktop computer with a wireless card, running Windows XP SP3. For a little while, I had a remote network connection set up for my job, but I didn't need the remote connection so I deleted it. Now, I am unable to connect to the internet at all from that computer through my wireless router. I can connect through my router using my laptop, and I can connect through my neighbor's router using my desktop, but for some reason I can't connect through my own router using my desktop. I see the "Wireless Network Connection 5" icon in my system tray, but it tells me it is not connected. When I click on the icon, I see a list of wireless networks, including my own, which is set up to automatically connect, although it doesn't. When I try to connect to my network on my own (by clicking on it, then clicking "Connect"), it asks me for my network password like it usually does. I see a box come up saying "Waiting for network to be ready..." and it hangs there. On the list of wireless networks, my network says "Acquiring network address" but it doesn't actually connect. How can I fix this? I tried rebooting my computer, repairing my connection, and restarting my router, and I am still having this problem.

    Read the article

  • How do I disable the network connection from .Net without needing admin priveledges?

    - by Brad Mathews
    I may be SOL on this but I thought I would give throw it out for possible solutions. I am writing a computer access control service to help me control my kids' computer use. Plan on open sourcing it when I have it working. It is written in VB.Net and needs to work on XP through 7. I am running into all sorts of security and desktop access issues on Windows 7. The service needs to run as admin to execute the NetSh command to disable the network. But I cannot interact with the desktop from the service so I IPC to a UI to handle other stuff, but I still cannot detect from the service if the desktop is locked. Argghh! I could get it all working from a hidden windows form app if I could just lick the one piece that needs admin permissions: disabling the network. It does no good if a kid logs on and denies the popup asking if the program should run as administrator and he says no. Also windows 7 will not start a program set to run as admin using HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run Anyone know how to get this working? Or have an outside the box solution? Thanks! Brad

    Read the article

  • Virtual Machine Network Architecture, Isolating Public and Private Networks

    - by Mark
    I'm looking for some insight into best practices for network traffic isolation within a virtual environment, specifically under VMWARE ESXi. Currently I have (in testing) 1 hardware server running ESXi but i expect to expand this to multiple pieces of hardware. The current setup is as follows: 1 pfsense VM, this VM accepts all outside (WAN/internet) traffic and performs firewall/port forwarding/NAT functionality. I have multiple public IP addresses sent to the this VM that are used for access to individual servers (via per incoming IP port forwarding rules). This VM is attached to the private (virtual) network that all other VMs are on. It also manages a VPN link into the private network with some access restrictions. This isn't the perimeter firewall but rather the firewall for this virtual pool only. I have 3 VMs that communicate with each other, as well as have some public access requirements: 1 LAMP server running an eCommerce site, public internet accessible 1 accounting server, access via windows server 2008 RDS services for remote access by users 1 inventory/warehouse management server, VPN to client terminals in warehouses These servers constantly talk with each other for data synchronization. Currently all the servers are on the same subnet/virtual network and connected to the internet through the pfsense VM. The pfsense firewall uses port forwarding and NAT to allow outside access to the servers for services and for server access to the internet. My main question is this: Is there a security benefit to adding a second virtual network adapter to each server and controlling traffic such that all server to server communication is on one separate virtual network, while any access to the outside world is routed through the other network adapter, through the firewall, and on the the internet. This is the type of architecture i would use if these were all physical servers, but i'm unsure if the networks being virtual changes the way i should approach locking down this system. Thank you for any thoughts or direction to any appropriate literature.

    Read the article

  • Is it possible to change an "Unidentified Network" into a "Home" or "Work" network on Windows 7

    - by Rhys
    I have a problem with Windows 7 RC (7100). I frequently use a crossover network cable on WinXP with static IP addresses to connect to various industrial devices (e.g. robots, pumps, valves or even other Windows PCs) that have Ethernet network ports. When I do this on Windows 7, the network connection is classed as an "Unidentified Network" in Networks and Sharing Center and the public firewall profile is enforced by Windows. I do not want to change the public profile and would prefer to use the Home or Work profile instead. For other networks like Home and Work I'm able to click on them and change the classification. This is not available for unidentified networks. My questions are these:- Is there a way to manual override the "Unidentified Network" classification? What tests are performed on the network that fail, therefore classifying it as an "Unidentified Network" By googling (hitting mainly vista issues) it seems that you need to ensure that the default gateway is not 0.0.0.0. I've done this. I've also tried to remove IPv6 but this does not seem possible on Windows 7.

    Read the article

  • Adding a Printer to my Print Server Failing

    - by Rudi Kershaw
    So, on the Windows Server page I read the following. Step 4: Add Network Printers Automatically Print Management (Printmanagement.msc) can automatically detect all the printers that are located on the same subnet as the computer on which you are running Print Management, install the appropriate printer drivers, set up the queues, and share the printers. To automatically add network printers to a printer server Open the Administrative Tools folder, and then double-click Print Management. In the Printer Management tree, right-click the appropriate server, and then click Add Printer. On the Printer Installation page of the Network Printer Installation Wizard, click Search the network for printers, and then click Next. If prompted, specify which driver to install for the printer. So, I have got to this point, made sure the printer (Canon MP620) is on and correctly plugged into the network. However, when I click "Search the network for printers", the wizard doesn't find it. Now, I can't get any further. Is there anything I could be doing wrong? How should I proceed moving forwards?

    Read the article

  • Virtual Machine Network Services causes networking problems in Vista Enterprise 64 bit install

    - by Bill
    I have a Quad-core/8GB Vista Enterprise 64-bit (SP2) installation on which I installed Virtual PC 2007. I have a problem that is opposite of all that I found searching around the Internet--everybody has problems making network connections from their guest VM. When Virtual Machine Network Services is enabled in the protocol stack for my network card across a reboot, it causes access problems to the network. The amount of time to login in using a domain credentialed account is upwards of 3 minutes, then after reaching the desktop the network and sharing center shows that my connection to the domain is unauthenticated. Disabling and re-enabling the Virtual Machine Network Services (uncheck in network properties/apply/recheck/apply) fixes the problem. And as long as I have the VMNS disabled when I shutdown the restart runs smoothly. I just have to remember to enable after login and disable before shutdown. I have un-installed and re-installed Virtual PC 2007 multiple times with restarts between. The install consists of the SP1 + a KB patch for guest resolution fix. Any help would be greatly appreciated. Some additional information... At one point during my hairpulling and teethgnashing with this, I tried to ping my primary DC and observed some weird responses: (Our DC is 10.10.10.25, my dynamic IP was 10.10.10.203) Reply from 10.10.10.203, Destination host unreachable. Request timed out. Reply from 10.10.10.25: ... This is not consistently repeatable, but thought it might strike a chord with someone.

    Read the article

  • Outlook locking network connection/session?

    - by HaydnWVN
    Scenario: We have an 'automatic orders' machine sat in the corner running XP with Outlook 2003. Its job is to check for new emails on a specific account, when it encounters one it checks the e-mail body for specific wording to determine which customer it is from (using a macro), then it checks the attachment for specific order codes before parsing the attachment to create a .csv file (which is then e-mailed onto one of the sales team) before importing the .csv into our bespoke ERP/Sales Order system to create an order. Problem: Periodically the machine will have symptoms of a lost network connection (unable to connect to any network source). Sometimes after several days, sometimes over a week. Volume of emails/orders processed does not seem to be linked. Additional info: The machines .pst is stored on a mapped network location. The .csv created is stored on a mapped network location. This is a workgroup, not a domain. All network drives are Samba shares from an Ubuntu fileserver. Our bespoke system runs from a database (MySQL) Ubuntu server. Our troubleshooting so far: I have switched machines (previous was Win2000) with the same symptoms. Restarting the machine FIXES the problem. Closing Outlook and then end tasking an Outlook.exe background process FIXES the problem. If you close Outlook, without end taking the background process, outlook will not reopen (saying it cannot find the pst file & it will not open any network location). Does Outlook have some kind of 'max session' linking it to network activity that is not closing after a mail request? Could Auto-archive be causing this? Is there a tool to check/display what each outlook.exe process is doing? Have not found many ways to troubleshoot this yet, as it is so infrequent...

    Read the article

  • Slackware - Assigning routes (IP address ranges) to one of many network adapters

    - by Dogbert
    I am using a Slackware 13.37 virtual machine within VirtualBox (current). I currently have a number of Ubuntu VMs on a single server, along with this Slackware VM. All VMs have been set up to use "Internal Network" mode, so they are all on a private LAN, and can see each other (ie: share files amongst themselves), but they remain private from the outside world. On on the these VMs (the Slackware one), I need to be able to grant it access to both this private network, and the internet at large. The first suggestion I found for handling this is to add another virtual network adapter to the VM, then set it to NAT. This results in the Slackware VM having the following network adapter setup: -NIC#1: Internal Network -NIC#2: NAT I want to set up the first network adapter (NIC#1) to handle all traffic on the following subnets: 10.10.0.0/255.255.0.0 192.168.1.0/255.255.255.0 And I want the second virtual network adapter (NIC#2) to handle everything else (ie: internet access). May I please have some assistance in setting this up on my Slackware VM? Additionally, I have searched for similar questions on SuperUser and Stackoverflow, but they all seem to pertain to my situation (ie: they all refer to OSX, or Ubuntu via the use of some UI-based tool). I'm trying to do this on Slack specifically via the command-line. Thanks!

    Read the article

  • How to share drive space from vmware server 2 host to a guest?

    - by matnagel
    In the vmware tools in the guest there is an option to access shares from the host. What is the way to create such shares on a vmware 2 host? I did not find where in infrastructure web access. I also went through the vmware server 2 user's guide but did not see it mentioned. Can you help? This is an ubuntu 64 bit server 8.04 LTS host.

    Read the article

  • Cisco AnyConnect VPN client - prevent connecting as work network

    - by Opmet
    From Windows 7 I'm using "Cisco AnyConnect Secure Mobility Client 3.0" to connect to our corporate network. Every time I establish the VPN connection Windows will set the type as "work network". I don't want this. So I go to "network and sharing center" and manually / interactively change it to "public network". But I have to repeat it for every new VPN connection. Is there any way to make Windows remember / persist this configuration? Can it be configured in the VPN client? Do our IT admins need to change something at server end? Motivation: A "work network" per default uses different firewall settings that allows for stuff like "network discovery" and "file shares". But I just need "remote desktop" (mstsc). Additional info: Our IT admins claimed this would be Windows default behaviour and there was nothing we could do about it: Windows would always initiate a VPN connection as "work network". Based on this statement I assume this is a "general" issue and went ahead posting here (at superuser.com).

    Read the article

  • How much market shares OpenGL2.0 in iPhone os hardwares(iPhone/iPot Touch)

    - by Eonil
    I'm planning making a game for AppStore, so I'm studying GLES. But, GLES 1.1 and 2.0 APIs are different about handling in some features.(and limitations) I have not enough time to consider both of them, I have to choosing one. 2.0 is clearly better in developer's view, but I'm worry about it's market share. I wish most users moved on newer SGX based hardware, but in fact, I don't know. Does anybody have information about location of those hardware ratio data in iPhone OS supported hardwares? (iPhone/iPod touch, per GPU) Please let me know.

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >