Search Results

Search found 10693 results on 428 pages for 'raw disk'.

Page 52/428 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • Does GetVolumeNameForVolumeMountPoint() return the GUID of a volume?

    - by sxingfeng
    Does GetVolumeNameForVolumeMountPoint() return the GUID of a volume in c++? GetVolumeNameForVolumeMmountPoint() { LPCTSTR lpszvolumeMountPoint, LPTSTR lpszVolumeName, DWORDcchBufferLength, } I mean if I am using a removeable disk. will the lpszVolumeName remained the same on the same computer? Does it return a certain ID for a certain volume everytime I insert the disk on my computer' USBport. And Make sure different disk's volumes will get different result? Many Thanks!

    Read the article

  • Cannot reactivate RAID-5 volume: The size of the plex member is invalid

    - by Ian Boyd
    We had a 3-drive Windows Server 2008 R2 RAID-5 fail (operating in redundancy mode): WDC 1 TB WDC 1 TB WDC 1 TB We removed the failed hard drive, and put a WDC 1 TB drive (that we had standing by) into the machine. When launched, Disk Manager, asked permission to "initialize" the disk as either: Master Boot Record (MBR) Guid Partition Table (GPT) We initialized the disk as GPT, converted it to dynamic, and tried to use the Repair Volume command - except it was greyed out. (which is a terrifying thing on a failed production server hosting 3 virtual servers) i tried from the diskpart command line tool. First we look for our RAID-5 volume that is in Failed Rd mode: DISKPART> list volume Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 E VMs (Raid5) NTFS RAID-5 1863 GB Failed Rd Volume 1 D DVD-ROM 0 B No Media Volume 2 System Rese NTFS Partition 100 MB Healthy System Volume 3 C NTFS Partition 1862 GB Healthy Boot There, Volume 0. Make that our active context: DISKPART> select volume 0 Volume 0 is the selected volume. Now we need to find the disk we will be repairing the volume with: DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 931 GB 0 B * Disk 1 Online 931 GB 931 GB * Disk 2 Online 1863 GB 0 B Disk 3 Online 931 GB 0 B * Disk M0 Missing 0 B 0 B * The disk with 931 GB free, Disk 1. Now we just need to repair the volume: DISKPART> repair disk=1 Virtual Disk Service error: The size of the plex member is invalid.

    Read the article

  • Upgrading a PERC h310 to a PERC H710 mini RAID controller on a Dell R620

    - by Gregg Leventhal
    I have an ESXi 5.0 Free license host using an internal Datastore (RAID 5, 5 Disk) that was configured with a Dell PERC h310 RAID controller. The disk performance was very poor, so I upgraded to the PERC H710 Mini. The IT Tech installed the controller and powered the host back on. I had to rescan the controller and the datastore appeared. Should any settings be changed in the RAID BIOS, or should the default settings be sufficient? Is they anything to be aware of when performing this type of upgrade in order to achieve the maximum performance?

    Read the article

  • Ubuntu hibernate resume fails: "PM: Resume from disk failed"

    - by Neil
    I just upgraded to Ubuntu 10.4 from 9.10, and it's now hiding the hibernate and suspend options. How do I get them back? So the way you do this is make sure that your swap partition is in /etc/fstab and swap is enabled, and big enough. Look at /proc/swaps to see if anything is listed. Now I'm getting this error when I boot after suspending: init: ureadahead-other main process (705) terminated with status 4 Does anyone know how to fix this? I'm using Ubuntu with kernel 2.6.32-22-generic.

    Read the article

  • Why does my ReadyNas 4200 have a constant beep post disk failure

    - by swagner88
    Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

    Read the article

  • Partition disk for dual boot Windows XP and Windows 7 (shared files)

    - by soupagain
    I wish to dual boot Windows XP and Windows 7. I wish to have my documents available from both OSes. Do I create a single partition and it just works? 2 partitions, one for each OS? 3 partitions, one for each OS and one for the "my documents"? [EDIT] I used 3 partitions, one for each partition and one for docs which is mapped as a separate drive. Works perfectly. The only think you need to do is hide the other OS partition, ie for Windows XP, hide the Windows 7 partition. You do this from partition manager.

    Read the article

  • Partition disk for dual boot Windows XP and Windows 7 (shared documents)

    - by soupagain
    I wish to dual boot Windows XP and Windows 7. I wish to have my documents available from both OSes. Do I create a single partition and it just works? 2 partitions, one for each OS? 3 partitions, one for each OS and one for the "my documents"? [EDIT] I used 3 partitions, one for each partition and one for docs which is mapped as a separate drive. Works perfectly. The only think you need to do is hide the other OS partition, ie for Windows XP, hide the Windows 7 partition. You do this from partition manager.

    Read the article

  • Windows 2003 R2 x86 Mini dump fails to write to disk

    - by Randy K
    I have 3 blade servers that are Blue Screening with a 0xC2 error as far as we can tell randomly. When it started happening I found that the servers weren't set to do provide a dump because they each have 16GB RAM and a 16GB swap file divided over 4 partitions in 4GB files. I set them to provided a small dump file (64K mini dump), but the dump files aren't being written. On start up the server event log is reporting both Event ID 45 "The system could not sucessfully load the crash dump driver." and Event ID 49 "Configuring the Page file for crash dump failed. Make sure there is a page file on the boot partition and that is large enough to contain all physical memory." I understanding is the the small dump shouldn't need a swap file large enough for all physical memory, but the error seems to point to this not being the case. The issue of course is that the max swap file size is 4GB, so this seems to be impossible. Can anyone point me where to go from here?

    Read the article

  • DBan not working because disk has bad sectors?

    - by canadiancreed
    Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

    Read the article

  • Windows XP SP3 on Macbook Has Limited Disk Space

    - by Mikey.B
    Hi Guys, I setup Windows XP SP3 on a 40 GB partition using bootcamp (partition formatted for NTFS). For some reason, the hard drive properties only show ~3 GB of space available. Funny thing is though, I've hardly installed anything on the system... and if I open the windows explorer, select all directories, and check properties, it appears that I'm only using 11 GB of space. What gives? I thought there might be hidden files/folders so I enabled the option to show it but still nada. Has anyone come across this before? Any suggestions for how to proceed here?

    Read the article

  • SQL Server & Disk Space

    - by Dismissile
    I created a database on a local SQL server that we use for development. I created the log and data files on a second hard drive (E:\MSSQL\DATA). I am using this database to do some speed tests so I created a lot of data (7 Million rows). I started running some pretty intensive queries and to get some test data I ran an update statement that updated all 7 million rows and now it has taken up all of the space on my C:\, which I don't understand since I put the data files on the E:\. Is there some files on the C:\ that would be growing based on me running queries on this other database, if so how do I stop it? I am doing with this database but I need to get my C:\ back in order. The database file group was PRIMARY, is this relevant?

    Read the article

  • Looking for cheap Wireless router, with USB for attached USB disk drive

    - by geoffc
    I have a 802.11b router at home (DLink DI-614+ (B rev)) and it is working perfectly well for me. I want to replace it though, since it is out of updates, and now several years old and heck, I want a new toy to configure! I was trying to decide what to get. I could care less about 802.11g or n support, since B is fast enough, but every device in my house is now B/G, so G would be fine for me. N buys me little to nothing. (Small enough house that range is a non-issue). The features I realized I want are a USB port for sharing a USB hard drive. I would like to have a central device I could store files on. I do not want to waste the power of an always running PC to do this, so a router seems like the place to go. I would love it, if it could support Vonage VOIP as well, then I could ditch a power brick from a second device (I have the small DLink Vonage VOIP box). All the current examples of this router (with USB drive, yet to find one with VOIP too!) are in the $100+ range, and N and silly, when a B/G is in the $30 range around here.

    Read the article

  • Solaris: detect hotswap SATA disk insert

    - by growse
    What's the method used on Solaris to get the system to rescan for new disks that have been hot-plugged on a SATA controller? I've got an HP X1600 NAS which had 9 drives configred in a ZFS pool. I've added 3 disks, but the format command still only shows the original 9. When I plugged them in, I saw this: cpqary3: [ID 823470 kern.notice] NOTICE: Smart Array P212 Controller cpqary3: [ID 823470 kern.notice] Hot-plug drive inserted, Port=1I Box=1 Bay=12 cpqary3: [ID 479030 kern.notice] Configured Drive ? ....... NO cpqary3: [ID 100000 kern.notice] cpqary3: [ID 823470 kern.notice] NOTICE: Smart Array P212 Controller cpqary3: [ID 823470 kern.notice] Hot-plug drive inserted, Port=1I Box=1 Bay=11 cpqary3: [ID 479030 kern.notice] Configured Drive ? ....... NO cpqary3: [ID 100000 kern.notice] cpqary3: [ID 823470 kern.notice] NOTICE: Smart Array P212 Controller cpqary3: [ID 823470 kern.notice] Hot-plug drive inserted, Port=1I Box=1 Bay=10 cpqary3: [ID 479030 kern.notice] Configured Drive ? ....... NO But can't figure out how to get the format command to see them so I know they've been detected by the system.

    Read the article

  • On Server Disk Storage VS SAN Storage

    - by Justin
    Hello, I am looking at buying three servers, and trying to figure out which storage solution makes the most sense in terms of performance and cost. Total budget is around: $10,000. OPTION 1: Dell servers with RAID 10 (4 Drives) each 7200RPM SAS 500GB, for a total capacity of 1TB. Each server is approx: $3000. Total storage then across all three servers is 3TB. OPTION 2: Same Dell servers with a cheap single drive no RAID for $2000 and go with a centralized SAN solution. The biggest problem is that I haven't been able to even find a SAN solution that is a reasonable price. Dell entry level storage servers are like $15,000. I am thinking just iSCSI, not fiber (too expensive). What do you guys recommend?

    Read the article

  • Windows XP Installation issue - cannot find hard disk

    - by Marco
    A friend of mine gave me a laptop with Windows 8 installed and nothing else. I don't like it so I am trying to remove it by installing Windows XP. I have a windows XP installation CD that I have used before and worked fine, but didn't work when I tried to install it on the Windows 8 machine. It keeps telling me I don't have a drive to install to. Then I log into Windows 8 again and install check partitions. I found 2 and tried to make a new one but it will only let me make one of 69mb. Next, I tied to find a way to go back to XP with BCD install and try to set the boot loader for XP but it wasnt there. Somehow I deleted the bootloader for Windows 8 and now it asks me for a recovery tool for media. I am not familiar with the laptop specs, but it is a Toshiba with about 250GB storage, and above 1GHz processor.

    Read the article

  • Create new partition on live production CentOS server

    - by Kimmel
    I have a production server that is running on CentOS. I'd like to create a partition on the server without having to reinstall everything. I have CLI and VNC access to the remote server. Is there anyway that I can create a partition safely? Here's my output from fdisk -l Disk /dev/sda: 85.9 GB, 85899345920 bytes 255 heads, 63 sectors/track, 10443 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00033d5e Device Boot Start End Blocks Id System /dev/sda1 * 1 10444 83885056 83 Linux Thanks.

    Read the article

  • Can't start my Windows XP Virtual Machine: Insufficient Disk Space

    - by Rob
    Okay, I currently have a server with two virtual machines installed on it, a CentOS5.4 and a Windows XP. I was remote desktopping the Windows XP chatting on IRC, and all of a sudden I lost connection. I checked with my HyperVisor and tried to restart it, and it won't start at all. It's giving me this error: Message from server0297.serverpool.gnet.ba: Failed to extend swap file (fileHandle 16414) from 0 KB to 524288 KB: No space left on device. Could not power on VM : No space left on device. Failed to power on VM info 4/17/2010 9:49:20 PM root Basically I bought the set up from a host, he installed the HyperVisor and the VirtualMachines, and honestly I don't really know what I'm doing. I've looked at some of the settings, and I can't figure it out. If you need any additional information, I'll try to provide it. The CentOS5.4 is still starting and working flawlessly, if that's relevant.

    Read the article

  • Solaris10 x86 mirror. Making second disk booteable when failure

    - by Kani
    Did a mirror (RAID1) with Solaris 10 in x86. Everything OK. Now, I´m trying to make the second disk booteable, this is: from grub or in case of failure of disk1. I edited /boot/grub/menu.lst: #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris 10 9/10 s10x_u9wos_14a X86 findroot (rootfs1,0,a) kernel /platform/i86pc/multiboot module /platform/i86pc/boot_archive #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot -s module /boot/amd64/x86.miniroot-safe #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe #---------------------END BOOTADM-------------------- #Make second disk booteable!!!!!!! title alternate boot findroot (rootfs1,1,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe But is not working. In the BIOS, when I select "alternate boot" I get: Error 15: 15 file not found also, how to configure to GRUB to make the disk2 to boot in case of error in disk1? Additionally, I did (but not related to GRUB): eeprom altbootpath=/devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a Here is the output of some commands that may help you: /sbin/biosdev 0x80 /pci@0,0/pci108e,5352@1f,2/disk@0,0 0x81 /pci@0,0/pci108e,5352@1f,2/disk@1,0 ls -l /dev/dsk/c1t?d0s0 lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t0d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@0,0:a lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t1d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a more /boot/solaris/bootenv.rc setprop ata-dma-enabled '1' setprop atapi-cd-dma-enabled '0' setprop ttyb-rts-dtr-off 'false' setprop ttyb-ignore-cd 'true' setprop ttya-rts-dtr-off 'false' setprop ttya-ignore-cd 'true' setprop ttyb-mode '9600,8,n,1,-' setprop ttya-mode '9600,8,n,1,-' setprop lba-access-ok '1' setprop prealloc-chunk-size '0x2000' setprop bootpath '/pci@0,0/pci108e,5352@1f,2/disk@0,0:a' setprop keyboard-layout 'US-English' setprop console 'text' setprop altbootpath '/pci@0,0/pci108e,5352@1f,2/disk@1,0:a' cat /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - #/dev/dsk/c1t0d0s1 - - swap - no - /dev/md/dsk/d1 - - swap - no - /dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no - /devices - /devices devfs - no - sharefs - /etc/dfs/sharetab sharefs - no - ctfs - /system/contract ctfs - no - objfs - /system/object objfs - no - swap - /tmp tmpfs - yes - df -h Filesystem size used avail capacity Mounted on /dev/md/dsk/d0 909G 11G 889G 2% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 14G 972K 14G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab /usr/lib/libc/libc_hwcap1.so.1 909G 11G 889G 2% /lib/libc.so.1 fd 0K 0K 0K 0% /dev/fd swap 14G 40K 14G 1% /tmp swap 14G 28K 14G 1% /var/run

    Read the article

  • Disk Redundancy across different server

    - by Mascarpone
    I have 3 servers, all with the same specs: Intel CPU 8 GB RAM Linux or BSD Single 2TB desktop SATA with more than 10K Hours of operation, with only less than 300 GB Used My provider cannot install a second hard drive, but can guarantee me that the drive will be replaced immediately in case of failure, with another equally crappy drive. The likelihood of drive failure is high, and since I can't use RAID, I was thinking about keeping a back up of each machine on all the other machines, so that there are always 2 copies on 2 different drives, plus the original. I would synchronize the drives every hour, with rsync, to guarantee some sort of redundancy, since bandwidth inside the DC is free, so it would be much cheaper than offsite backup. (A daily offiste backup is kept anyhow). What do you think? Any suggestion?

    Read the article

  • Linux's best filesystem to work with 10000's of files without overloading the system I/O

    - by mhambra
    Hi all. It is known that certain AMD64 Linuxes are subject of being unresponsive under heavy disk I/O (see Gentoo forums: AMD64 system slow/unresponsive during disk access (Part 2)), unfortunately have such one. I want to put /var/tmp/portage and /usr/portage trees to a separate partition, but what FS to choose for it? Requirements: * for journaling, performance is preffered over safe data read/write operations * optimized to read/write 10000 of small files Candidates: * ext2 without any journaling * BtrFS In Phoronix tests, BtrFS had demonstrated a good random access performance (fat better than XFS thereby it may be less CPU-aggressive). However, unpacking operation seems to be faster with XFS there, but it was tested that unpacking kernel tree to XFS makes my system to react slower for 51% disregard of any renice'd processes and/or schedulers. Why no ReiserFS? Google'd this (q: reiserfs ext2 cpu): 1 Apr 2006 ... Surprisingly, the ReiserFS and the XFS used significantly more CPU to remove file tree (86% and 65%) when other FS used about 15% (Ext3 and ... Is it same now?

    Read the article

  • FATA disk performance for VMware

    - by Sergei
    Hi, We are moving to the dataceneter and planning to have tiered storage on EVA4400 - FC RAID 10 for SQL databases and RAID5 across 24 FATA 1TB disks form VMware ESX guests.HP is describing FATA disks as suitable for near online storage, however I am not convinced that 24 spindles will not be enough for running VMWare for 3 ESX servers. Does anyone has opinion on why this could be a such a bad idea?

    Read the article

  • Match Hard Disk Partition Table?

    - by MA1
    What is the most efficient way to match the partition tables on two different hard disks? I have saved the partition tables using dd command in linux. The partition tables are from a Windows system.

    Read the article

  • RAID Array performance on an HP Proliant ML350 G5 Smart Array E200i

    - by Nate Pinchot
    We have a client who is complaining about performance of an application which utilizes an MS SQL database. They do not believe the performance issues are the fault of the application itself. The Smart Array E200i RAID controller has 128MB cache and we have the cache set to 75% read/25% write. The disk array set to enable write caching. Recently we ran a disk performance test using SQLIO based on this guide. We used a 10 GB file for the test found that the average sequential read rate was ~60 MB/sec (megabytes/sec) and the average random read rate was ~30 MB/sec. Are these numbers on par for what the server should be performing? Better than on par? Horrible? Amazing?

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >