Search Results

Search found 1800 results on 72 pages for 'the digital ninja'.

Page 52/72 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• cannot boot ubuntu 13.10 with my usb, Can i change the kernal on my laptop to run it?

  - by Carlos Dunick

  Currently i am running 12.04 and looking for an upgrade to 13.10 I first tried a bootable 64bit usb and failed. With the message saying "Kernal requires an x86-64 CPU but only detected an I686 CPU Unable to boot please use a kernal appropriate for your CPU" then tried 32bit and same message came up. Is this due to my laptop simply being to slow? or can/should i change the kernal somehow? Acer Aspire 5710z Intel Pentium dual core processor, 1.73Ghz, 533 MHz FSB, 1 MB L2 cache. 2GB DDR2 lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:00.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:00.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller 06:00.2 FLASH memory: ENE Technology Inc Memory Stick Card Reader Controller 06:00.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller

  Read the article

• Slightly off topic - How to Fix Sky Go Error [t6013-c1501] (and [t6000-c1501])

  - by bconlon

  Sky doesn't seem to understand what their own errors mean, so I cobbled together an understanding from some other posts and managed to get it working.When you see the error [t6013-c1501] instead of your TV programme in Sky Go, it seems to mean:'You registered a device, but then changed the hardware, so now I'm confused!'In other words, the Digital rights management (DRM) used between Sky Go and Silverlight stored an old fingerprint of your PC, but rather than recognising this and allowing you to remove the device, it just disappears from the 'Manage Devices' page.DISCLAIMER: Perform the following steps at your own risk. It worked for me, but I didn't care if it broke stuff. If you care....don't do it!So, to fix this I did the following:1. Login to Sky Go and click 'Watch live TV' from the home page. It will attempt to show Sky News and fail with the error [t6013-c1501].2. Right click on the error and you should see the Menu option 'Silverlight'. Select this and a dialog should appear. Click the 'Application Storage' tab and delete any entry that relates to sky go. Clcik OK to close the dialog.3. Open explorer and navigate to the folder C:\ProgramData\Microsoft\PlayReady4. Rename the file mspr.hds to mspr.hds.OLD5. Go back to the browser and click F5. You may need to logout/login (not sure).Note: Don't rename/delete the folder C:\ProgramData\Microsoft\PlayReady or you will get the error [t6000-c1501]. The folder must exist in order for the new file to be created by Silverlight. Techie talk:So whoever wrote the code to create a new mspr.hds file didn't write code to check the folder existed causing what I assume is a generic error t6000, probably something like:catch (Exception ex) { WriteToLog("Oops, something broke!"); }#

  Read the article

• Turn a Kindle into a Weather Display Station

  - by Jason Fitzpatrick

  The e-ink display, network connectivity, and low-power consumption of Kindle ebook readers make them a perfect candidate for an infrequently refreshed high-visibility display–like a weather display. Read on to see how to hack a Kindle to serve up the local weather. Tinker and hardware hacker Matt Petroff hacked his Kindle to accept input from a web server and then, graciously and in the spirit of geeky projects everywhere, shared his source code. He explains the heart of the project: The server side of the system uses shell and Python scripts to convert weather forecast data into an image for the Kindle. The scripts first download and parse forecast data from NOAA via the National Digital Forecast Database XML/SOAP Service. After parsing the data, the data then needs to be converted into an image. This is accomplished by preprocessing a specially crafted SVG file to insert temperatures, forecast symbols, and days of the week. This SVG is then rendered as a PNG using rsvg-convert and converted to a grayscale, no transparency color space as required by the Kindle using pngcrush. Finally, it is copied to a public location on the web server. The Kindle is set to refresh twice a day (you could easily tweak the scripts for a more frequent refresh) and displays the forecast as seen in the photo above–with crisp and easy to read text and icons. Hit up the link below for more information and the project’s source code. How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

  Read the article

• No sound Ubuntu 12.04 through HDMI

  - by MikeMan

  Specs: Asus G73JH i7/720; ATI Mobility 5870 I have read through a lot of threads on getting HDMI sound to work and non of them have fixed my issue. Granted I am very new to Linux and know only the GUI aspect of what it does from finding similarities that Windows 7 has. I would like to become a Linux Power User and I figured this would be a good step to get started. I was able to successfully install my graphics driver and it shows in use. I connect the HDMI to my HD TV and I get no sound. I don't care about auto switch for sound, that would be great but not necessary. I just want my sound to work through the HDMI. What I have tried: Changed GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" pact set-card-profile 0 output:hdmi-surround Failure: no such entity Sound Settings: Right-click Sound indicator ? Sound Settings ? Output Tab, and set Digital Output (S/PDIF) Built in Audio Speakers Built in Audio I only get 2 settings. If I right-click the area below those 2 in the "play sound through" box, I get no "show hidden devices". I am also doing all this with the HDMI connected to eliminate any possibility for error.

  Read the article

• Agressive Auto-Updating?

  - by MattiasK

  What do you guys think is best practice regarding auto-updating? Google Chrome for instance seems to auto-update itself as soon as it get's a chance without asking and I'm fine with it. I think most "normal" users benefits from updates being a transparent process. Then again, some more technical users might be miffed if you update their app without permission, as I see it there's 3 options: 1) Have a checkbox when installing that says "allow automatic updates" 2) Just have a preference somewhere that allows you to "disable automatic updates" so that you have to "check for updates manually" I'm leaning towards 2) because 1) feels like it might alienate non-technical users and I'd rather avoid installation queries if possible. Also I'm thinking about making it easy to downgrade if an upgrade (heaven forbid) causes trouble, what are your thoughts? Another question, even if auto-updates are automatically, perhaps they should be announced. If there's new features for example otherwise you might not realize and use them One thing that kinda scares me though is the security implications, someone could theorically hack my server and push out spyware/zombieware to all my customers. It seems that using digital signatures to prevent man-in-the-middle attacks is the least you could do otherwise you might be hooked up to a network that spoofs the address of of update server.

  Read the article

• Aggressive Auto-Updating?

  - by MattiasK

  What do you guys think is best practice regarding auto-updating? Google Chrome for instance seems to auto-update itself as soon as it get's a chance without asking and I'm fine with it. I think most "normal" users benefits from updates being a transparent process. Then again, some more technical users might be miffed if you update their app without permission, as I see it there's 3 options: 1) Have a checkbox when installing that says "allow automatic updates" 2) Just have a preference somewhere that allows you to "disable automatic updates" so that you have to "check for updates manually" I'm leaning towards 2) because 1) feels like it might alienate non-technical users and I'd rather avoid installation queries if possible. Also I'm thinking about making it easy to downgrade if an upgrade (heaven forbid) causes trouble, what are your thoughts? Another question, even if auto-updates are automatically, perhaps they should be announced. If there's new features for example otherwise you might not realize and use them One thing that kinda scares me though is the security implications, someone could theorically hack my server and push out spyware/zombieware to all my customers. It seems that using digital signatures to prevent man-in-the-middle attacks is the least you could do otherwise you might be hooked up to a network that spoofs the address of of update server.

  Read the article

• Just installed Ubuntu 12.04. When booting, all I get is a black screen with cursor

  - by user66378

  Installation appears to go fine. After rebooting, I get my motherboard loading screens, but when it comes time for Ubuntu to boot, I just get a black screen with a blinking white underscore in the top-left - same as I got when waiting for the install CD to load, except it lasts forever. The only keypress it seems to recognize is ctrl+alt+del, which reboots. Letters don't register, function keys w/ or w/o modifiers do nothing. I've installed Ubuntu 12.04 twice and got the same error. The first time, I installed it as the only OS, and had it take up the whole disk. The second time, I installed Windows 7 first, then Ubuntu by specifying custom partitions. After this install, it would boot straight to Windows without showing grub. I used EasyBCD to add the Ubuntu installation to grub, and this got grub to show, and let me select it, but it led back to the same error described up top. I've had Linux Mint 11 and 12 installed on this PC, but was unable to get previous versions of Ubuntu to install (always had errors while installing, not after). Hardware: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 ASUS SABERTOOTH P67 (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard EVGA 01G-P3-1371-TR GeForce GTX 460 (Fermi) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Western Digital RE4 WD5003ABYX 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive

  Read the article

• "drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6]" during install

  - by Warez J. Coxtrong

  I have a desktop PC which I built a while back. It has an Athlon XP 2500+, 2.5GB RAM, and an Nvidia (PNY Verto) Geforce 6200. I removed the CD drive to add another hard drive so I install from a USB flash drive. When I try to install 12.04 it seems to work just fine. The GUI boots up and wifi even connects to my router. I go through the language screen, the partition screen, the keyboard screen, the location screen, and the import my Windows settings screen just fine. But as soon as I'm done with all that the next screen goes black and displays this message: drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6] Since the GUI starts just fine earlier during the install, I know I shouldn't be having any display problems, but I am. How do I get Ubuntu to install properly? I have four IDE hard drives, all Western Digital: a 250GB, a 160GB, a 40GB occupied by Windows XP, and a 120GB that I'm trying to use for Ubuntu. 3GB of the 120GB drive are formatted for swap. I have checked the MD5sum of install image file and it all matches up. d791352694374f1c478779f7f4447a3f ubuntu-12.04-desktop-i386.iso

  Read the article

• Management and Monitoring Tools for Windows Azure

  - by BuckWoody

  With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

  Read the article

• Management and Monitoring Tools for Windows Azure

  - by BuckWoody

  With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

  Read the article

• Configuring Expert Search in Communicator 14 and SharePoint 2010

  Communicator 14 provides functionality to be able to search for contacts not just by name, but by skill.  For example a customer service agent at an airline can search for other agents with Travel Advisory experience by typing the search criteria into the Communicator search box and performing a search by keyword.  The search results will return users who have specified that skill in their profile on their SharePoint My Site.  This is actually pretty easy to configure, Ill show you how. Create Search and People Search Results Pages in SharePoint Communicator 14 Expert Search works by using the SharePoint 2010 Search Service to search SharePoint for user profiles with matching keywords.  This requires that you have an Enterprise Search site in your site collection which includes the search service and also the People Results pages.  The easiest way to do this is to create a Search Center site in your site collection. Note: I get an error when trying to create an Enterprise Search site in a Team Site in the SharePoint 2010 RTM bits, so I created it as a site collection that is evident in the URLs you see below. In the screenshots below, you can see that the URL of the SharePoint search service in the Search site collection is http://sps2010/sites/search/_vti_bin/search.asmx, and the URL of the People Search Results page is http://sps2010/sites/Search/Pages/peopleresults.aspx. Point Communications Server 14 to Search and People Search Results Pages For Communicator 14 to be able to perform an Expert Search, you need to configure Communications Server 14 to point to the Search Service and People Search Results page URLs. From a server with the OCS Core bits installed, fire up the Communications Server Management Shell and type Get-CsClientPolicy. Scroll down to the bottom of the output, were interested in setting the values of: SPSearchInternalURL SPSearchExternalURL SPSearchCenterInternalURL SPSearchCenterExternalURL SPSearchInternalURL and SPSearchExternalURL correspond to the internal and external URLs of the SharePoint search service in the Search site collection, while SPSearchCenterInternalURL and SPSearchCenterExternalURL correspond to the internal and external URLs of the people search results pages. Well use the Communications Server Management Shell to set the values of these CS policy properties. For simplicity, Im only going to set the internal URLs here. Set-CsClientPolicy SPSearchInternalURL http://sps2010/sites/search/_vti_bin/search.asmx     -SPSearchCenterInternalURL http://sps2010/sites/Search/Pages/peopleresults.aspx Log out and back into Communicator.  You can verify that these settings were applied by running the Get-CsClientPolicy cmdlet again from the Communications Server Management Shell. However, theres another super-secret ninja trick to verify that the settings were applied: Find the Communicator icon in the Windows System Tray Hold down the Ctrl button Click (left) the Communicator icon in the Windows System Tray do not depress the Ctrl button You should now see an extra menu item called Configuration Information, click it. Scroll down and locate the Expert Search URL and SharePoint Search Center URL keys and verify that their values correspond to those you set using the Set-CsClientPolicy PowerShell cmdlet. Configure a Sharepoint User Profile Import Im not going to provide detailed steps here except to say that you need to configure the SharePoint 2010 User Profile  Service Application to import user account details from Active Directory on a scheduled basis. This is a critical step because there are several user profile properties e.g. SipAddress that are only populated by a user profile import.  When performing an Expert Search, Communicator can only render results for users who have a SipAddress specified. Add Skills to User Profiles Navigate to your My Site and click on My Profile.  This page allows you to set many contact details that are searchable in SharePoint.  Were particularly interested in the Ask Me About property of a users profile.  Expert Search searches against this property to find users with matching skills. Configure a SharePoint Search Crawl Ensure that you have a scheduled job to crawl your Local SharePoint Sites content source.  Depending on how you have this configured, it will also crawl the My Site site collection and add user properties such as Ask Me About to the search index. Thats It! SharePoint 2010 provides new social and collaboration features to help users find other users with similar skills or interests. Expert Search extends this functionality directly into Microsoft Communicator 14, allowing you to interact with the users directly from the search results. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How to properly add texture to multi-fixture/shape b2Body

  - by Blazej Wdowikowski

  Hello to everyone this is my first poste here I hope that will be not fail start. At start I must say I make part 1 in Ray's Tutorial "How To Make A Game Like Fruit Ninja With Box2D and Cocos2D". But I wonder what when I want make more complex body with texture? Simple just add n b2FixtureDef to the same body. OK but what about texture? If I will take code from that tutorial it only fill last fixture. Probably it does not takes every b2Vec2 point. I was right, it did not. So quick refactor and from that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int vertexCount = shape->GetVertexCount(); NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; for(int i = 0; i < vertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width, _centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I came up with that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { int vertexCount = 0; //gather total number of b2Vect2 points b2Fixture *currentFixture = body->GetFixtureList(); while (currentFixture) { //new b2PolygonShape *shape = (b2PolygonShape*)currentFixture->GetShape(); vertexCount += shape->GetVertexCount(); currentFixture = currentFixture->GetNext(); } NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); while (originalFixture) { //new NSLog((NSString*)@"-"); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int currentVertexCount = shape->GetVertexCount(); for(int i = 0; i < currentVertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } originalFixture = originalFixture->GetNext(); } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width,_centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I was working for simple two fixtures body like b2BodyDef bodyDef; bodyDef.type = b2_dynamicBody; bodyDef.position = position; bodyDef.angle = rotation; b2Body *body = world->CreateBody(&bodyDef); b2FixtureDef fixtureDef; fixtureDef.density = 1.0; fixtureDef.friction = 0.5; fixtureDef.restitution = 0.2; fixtureDef.filter.categoryBits = 0x0001; fixtureDef.filter.maskBits = 0x0001; b2Vec2 vertices[] = { b2Vec2(0.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(0.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(50.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(60.0/PTM_RATIO,60.0/PTM_RATIO) }; b2PolygonShape shape; shape.Set(vertices, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); b2Vec2 vertices2[] = { b2Vec2(20.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(20.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(70.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(80.0/PTM_RATIO,60.0/PTM_RATIO) }; shape.Set(vertices2, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); But if I try put secondary shape upper than first it starting wierd, texture goes crazy. For example not mention about more complex shapes. What's more if shapes have one common point texture will not render for them at all [For that I use Physics Edytor like in tutorial part1] BTW. I use PolygonSprite and in method createWithWorld... another shapes. Uff.. Question So my question is, why texture coords are in such a mess up? It's my modify method or just wrong approach? Maybe I should remove duplicated from points array?

  Read the article

• CodePlex Daily Summary for Monday, March 07, 2011

  CodePlex Daily Summary for Monday, March 07, 2011Popular ReleasesDotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 2: What is new in DotNetAge 2.0 ? Completely update DJME to DJME2, enhance user experience ,more beautiful and more interactively visit DJME project home to lean more about DJME http://www.dotnetage.com/sites/home/djme.html A new widget engine has came! Faster and easiler. Runtime performance enhanced. SEO enhanced. UI Designer enhanced. A new web resources explorer. Page manager enhanced. BlogML supports added that allows you import/export your blog data to/from dotnetage publishi...Master Data Services Manager: stable 1.0.3: Update 2011-03-07 : bug fixes added external configuration File : configuration.config added TreeView Display of model (still in dev) http://img96.imageshack.us/img96/5067/screenshot073l.jpg added Connection Parameters (username, domain, password, stored encrypted in configuration file) http://img402.imageshack.us/img402/5350/screenshot072qc.jpgSharePoint Content Inventory: Release 1.1: Release 1.1Menu and Context Menu for Silverlight 4.0: Silverlight Menu and Context Menu v2.4 Beta: - Moved the core of the PopupMenu class to the new PopupMenuBase class. - Renamed the MenuTriggerElement class to MenuTriggerRelationship. - Renamed the ApplicationMenus property to MenuTriggers. - Renamed the ImageLeftOpacity property to ImageOpacity. - Renamed the ImageLeftVisibility property to ImageVisibility. - Renamed the ImageLeftMinWidth property to ImageMinWidth. - Renamed the ImagePathForRightMargin property to ImageRightPath. - Renamed the ImageSourceForRightMargin property to Ima...Kooboo CMS: Kooboo CMS 3.0 Beta: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL,SQLCE, RavenDB and MongoDB. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder t...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.2: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added fullscreen for the popup and popupformIronPython: 2.7 Release Candidate 2: On behalf of the IronPython team, I am pleased to announce IronPython 2.7 Release Candidate 2. The releases contains a few minor bug fixes, including a working webbrowser module. Please see the release notes for 61395 for what was fixed in previous releases.LINQ to Twitter: LINQ to Twitter Beta v2.0.20: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation.IIS Tuner: IIS Tuner 1.0: IIS and ASP.NET performance optimization toolMinemapper: Minemapper v0.1.6: Once again supports biomes, thanks to an updated Minecraft Biome Extractor, which added support for the new Minecraft beta v1.3 map format. Updated mcmap to support new biome format.CRM 2011 OData Query Designer: CRM 2011 OData Query Designer: The CRM 2011 OData Query Designer is a Silverlight 4 application that is packaged as a Managed CRM 2011 Solution. This tool allows you to build OData queries by selecting filter criteria, select attributes and order by attributes. The tool also allows you to Execute the query and view the ATOM and JSON data returned. The look and feel of this component will improve and new functionality will be added in the near future so please provide feedback on your experience. Import this solution int...Sandcastle Help File Builder: SHFB v1.9.3.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. This release uses the Sandcastle Guided Installation package used by Sandcastle Styles. Download and extract to a folder and then run SandcastleI...mytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.53.0 beta 2: New SEO Optimisation WEB.mytrip.mvc 1.0.53.0 Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) SRC.mytrip.mvc 1.0.53.0 System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.5, MVC3 RTM WARNING For run and debug SRC.mytrip.mvc 1.0.53.0 dow...AutoLoL: AutoLoL v1.6.4: It is now possible to run the clicker anyway when it can't detect the Masteries Window Fixed a critical bug in the open file dialog Removed the resize button Some UI changes 3D camera movement is now more intuitive (Trackball rotation) When an error occurs on the clicker it will attempt to focus AutoLoLYAF.NET (aka Yet Another Forum.NET): v1.9.5.5 RTW: YAF v1.9.5.5 RTM (Date: 3/4/2011 Rev: 4742) Official Discussion Thread here: http://forum.yetanotherforum.net/yaf_postsm47149_v1-9-5-5-RTW--Date-3-4-2011-Rev-4742.aspx Changes in v1.9.5.5 Rev. #4661 - Added "Copy" function to forum administration -- Now instead of having to manually re-enter all the access masks, etc, you can just duplicate an existing forum and modify after the fact. Rev. #4642 - New Setting to Enable/Disable Last Unread posts links Rev. #4641 - Added Arabic Language t...Snippet Designer: Snippet Designer 1.3.1: Snippet Designer 1.3.1 for Visual Studio 2010This is a bug fix release. Change logFixed bug where Snippet Designer would fail if you had the most recent Productivity Power Tools installed Fixed bug where "Export as Snippet" was failing in non-english locales Fixed bug where opening a new .snippet file would fail in non-english localesChiave File Encryption: Chiave 1.0: Final Relase for Chave 1.0 Stable: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.2 to 1.0: ==================== Added: > Added Icon Overlay for Windows 7 Taskbar Icon. >Added Thumbnail Toolbar buttons to make the navigation easier...ASP.NET: Sprite and Image Optimization Preview 3: The ASP.NET Sprite and Image Optimization framework is designed to decrease the amount of time required to request and display a page from a web server by performing a variety of optimizations on the page’s images. This is the third preview of the feature and works with ASP.NET Web Forms 4, ASP.NET MVC 3, and ASP.NET Web Pages (Razor) projects. The binaries are also available via NuGet: AspNetSprites-Core AspNetSprites-WebFormsControl AspNetSprites-MvcAndRazorHelper It includes the foll...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...New ProjectsAppFactory: Die AppFactory Dient zur Vereinfachung der entwicklung von WPF Anwedungen. Es ist in C# entwickelt.Change the Default Playback Sound Device: ChangePlaybackDevice makes it easier for personal user to change the default playback sound device. You'll no longer have to change the default playback sound device by hand. It's developed in C#. Conectayas: Conectayas is an open source "Connect Four" alike game but transformable to "Tic-Tac-Toe" and to a lot of similar games that uses mouse. Written in DHTML (JavaScript, CSS and HTML). Very configurable. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.Diamond: The all in one toolkit for WPF and Silverligth projects.Digital Disk File Format: Digital Disk is a File format that uses a simple key system, it is currently in development. It is written in vb.net, but will be expanded into other languagesdotnetMvcMalll: this is a asp.net mvc mallEasyCache .NET: EasyCache .NET is a simplified API over the ASP.NET Cache object. Its purpose is to offer a more concise syntax for adding and retrieving items from the cache.Eric Fang SharePoint workflow activities: Eric Fang SharePoint workflow activitiesExpert.NET: Expert.NET is an expert system framework for .NET applications. Written in F#, it provides constructs for defining probabilistic rulesets, as well as an inference engine. Expert.NET is ideal for encoding domain knowledge used by troubleshooting applications.GameGolem: The GameGolem is an XNA Casual Gamers portal. The purpose is to create a single ClickOnce deployed "Game Launcher" which exposes simple API for games to keep track of highscores, achivements, etc. GameGolem will become a Kongregate-like XNA-based casual games portal.Hundiyas: Hundiyas is an open source "Battleship" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.ISBC: Practicas ISBC 10/11maocaijun.database: databaseNCLI: A simple API for command line argument parsing, written in C#.nEMO: nEMO is a pure C# framework for Evolutionary Multiobjective Optimization.N-tier architecture sample: A sample on how to practically design a system following an n-tier (multitier) architecture in line with the patterns and practices presented by Microsofts Application Architectural Guide 2.0. Focus is on a service application and it´s client applications of various types.PostsByMonth Widget: This is a simple widget for the Graffiti CMS application that allows you to get a monthly list of new posts to the site. It's configurable to allow for the # of posts to display as well as the the format of the month/year header, the title and the individual line entries. This is written in .Net 3.5 with Vb.Net.Puzzle Pal: Smartphone assistant for all your puzzling events.RavenDB Notification: Notification plugin for RavenDB. With this plugin you are able to subscribe to insert and delete notifications from the RavenDB server. Very helpfull if you need to process new documents on the remote clients and you do not like to query DB for new changes.Teamwork by Intrigue Deviation: A feature-rich team collaboration and project management effort built around Scrum methodology with MVC/2.test_flow: test flowTicari Uygulama Paketi: Ticari Uygulama Paketi (TUP), Microsoft Ofis 2010 ürünleri için gelistirilmis eklenti yazilimidir.XpsViewer: XpsVieweryaphan: yaphan cms.

  Read the article

• CodePlex Daily Summary for Friday, November 26, 2010

  CodePlex Daily Summary for Friday, November 26, 2010Popular ReleasesMath.NET Numerics: Beta 1: First beta of Math.NET Numerics. Only contains the managed linear algebra provider. Beta 2 will include the native linear algebra providers along with better documentation and examples.WatchersNET.SiteMap: WatchersNET.SiteMap 01.03.02: Whats NewNew Tax Filter, You can now select which Terms you want to Use.TextGen - Another Template Based Text Generator: TextGen v0.2: This is the first version of TextGen exposing its core functionality to COM. See the Access demo (Access 2000 file format) included in the package. For installation and usage instructions see ReadMe.txt. Have fun and provide feedback!Minecraft GPS: Minecraft GPS 1.1: 1.1 Release New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-11-25: Code samples for Visual Studio 2010Typps (formerly jiffycms) wysiwyg rich text HTML editor for ASP.NET AJAX: Typps 2.9: -When uploading files (not images), through the file uploader and the multi-file uploader, FileUploaded and MultiFileUploaded event handlers were reporting an empty event argument, this is fixed now. -Fixed also url field not updating when uploading a file ( not image)Wii Backup Fusion: Wii Backup Fusion 0.8.5 Beta: - WBFS repair (default) options fixed - Transfer to image fixed - Settings ui widget names fixed - Some little bug fixes You need to reset the settings! Delete WiiBaFu's config file or registry entries on windows: Linux: ~/.config/WiiBaFu/wiibafu.conf Windows: HKEY_CURRENT_USER\Software\WiiBaFu\wiibafu Mac OS X: ~/Library/Preferences/com.wiibafu.wiibafu.plist Caution: This is a BETA version! Errors, crashes and data loss not impossible! Use in test environments only, not on productive syste...Minemapper: Minemapper v0.1.3: Added process count and world size calculation progress to the status bar. Added View->'Status Bar' menu item to show/hide the status bar. Status bar is automatically shown when loading a world. Added a prompt, when loading a world, to use or clear cached images.SQL Monitor: SQL Monitor 1.4: 1.added automatically load sql server instances 2.added friendly wait cursor 3.fixed problem with 4.0 fx 4.added exception handlingLateBindingApi.Excel: LateBindingApi.Excel Release 0.7f (fixed): Unterschiede zur Vorgängerversion: - XlConverter.ToRgb umbenannt zu XlConverter.ToDouble - XlConverter.GetFileExtension hinzugefügt (.xls oder .xlsx) - Insert Methoden+Overloads für Range und ShapeNodes - Xml Doku im Code entfernt Release+Samples V0.7f: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Examp...Deep Zoom for WPF: First Release: This first release of the Deep Zoom control has the same source code, binaries and demos as the CodeProject article (http://www.codeproject.com/KB/WPF/DeepZoom.aspx).BlogEngine.NET: BlogEngine.NET 2.0 RC: This is a Release Candidate version for BlogEngine.NET 2.0. The most current, stable version of BlogEngine.NET is version 1.6. Find out more about the BlogEngine.NET 2.0 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation and the installation screencast. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. As this ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.156: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a feature for aggregating the overall metrics in a folder full of NodeXL workbooks, adds geographical coordinates to the Twitter import features, and fixes a memory-related bug. See the Complete NodeXL Release History for details. Please Note: There is a new option in the setup program to install for "Just Me" or "Everyone." Most people...VFPX: FoxBarcode v.0.11: FoxBarcode v.0.11 - Released 2010.11.22 FoxBarcode is a 100% Visual FoxPro class that provides a tool for generating images with different bar code symbologies to be used in VFP forms and reports, or exported to other applications. Its use and distribution is free for all Visual FoxPro Community. Whats is new? Added a third parameter to the BarcodeImage() method Fixed some minor bugs History FoxBarcode v.0.10 - Released 2010.11.19 - 85 Downloads Project page: FoxBarcodeDotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 1.1.0.5: What is new in DotNetAge 1.1.0.5 ?Document Library features and template added. Resolve issues of templates Improving publishing service performance Opml support added. What is new in DotNetAge 1.1 ? D.N.A Core updatesImprove runtime performance , more stabilize. The DNA core objects model added. Personalization features added that allows users create the personal website, manage their resources, store personal data DynamicUIFixed the PageManager could not move page node bug. ...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3.1 and demos: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6MDownloader: MDownloader-0.15.24.6966: Fixed Updater; Fixed minor bugs;WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.1: Version: 2.0.0.1 (Milestone 1): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ....NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.01: Added new extensions for - object.CountLoopsToNull Added new extensions for DateTime: - DateTime.IsWeekend - DateTime.AddWeeks Added new extensions for string: - string.Repeat - string.IsNumeric - string.ExtractDigits - string.ConcatWith - string.ToGuid - string.ToGuidSave Added new extensions for Exception: - Exception.GetOriginalException Added new extensions for Stream: - Stream.Write (overload) And other new methods ... Release as of dotnetpro 01/2011Free language translator and file converter: Free Language Translator 2.2: Starting with version 2.0, the translator encountered a major redesign that uses MEF based plugins and .net 4.0. I've also fixed some bugs and added support for translating subtitles that can show up in video media players. Version 2.1 shows the context menu 'Translate' in Windows Explorer on right click. Version 2.2 has links to start the media file with its associated subtitle. Download the zip file and expand it in a temporary location on your local disk. At a minimum , you should uninstal...New Projects.NET DroneController: The .NET DroneController makes it easy to write applications that allow you to control an ARDrone quadricopter. BELT (A PowerShell Snapin for IE Browser Automation): BELT is a PowerShell snapin for IE browser automation. BELT makes it easier to control IE by PowerShell. "BELT" originally stands for "Browser Element Locating Tool".BusStationInfo: BusStationInfoDadaist: Dadaist is a random natural language generator that allows creation of random yet understandable (and often crazy) placeholder text for web designers. It could one day replace "Lorem ipsum" altogether! It is developed in C# and is a console application.Darskade LMS: Darskade is a kind of Learning Management System (LMS as a branch of CMS) and its main goal is to help professors and teacher assistants to manage classes, communicate with students, upload course contents ,put assignments and grades on it and more.ESRI for TableTops: An extension of the ESRI Api for use on digital tabletops and multitouch surfaces.Execute a SQL Server Agent Job - SSIS Package: The focus of SSMSAGENTJOBVBS is to explain how you can execute a SQL Server Agent Job remotely with the SSIS package, or DTSX file, as a job step. Look at the source code and dissect. Format.NET: Format.NET is an easy to use library to enable advanced and smart object formatting in .NET projects. Extends the default String.Format(...) allowing property resolution, custom formatting and text alignment.Gallery.net: Gallery.net is a tag-based image management solution, initially targeting for High Schools to manage and organize their large digital image assets. It is developed in C#, ASP.Net MVC3. GroupChallenge: GroupChallenge is a trivia game for one or more simultaneous players to interactively answer questions and submit questions to a hosted game server. Source code includes a WCF Data Service (OData) server, Windows Phone client, and a Silverlight client. Great for User Groups.GSWork: Manage clients and events in your company in a fast and efficient, without relying on a physical file. Ideal for companies with workers with no need to be in the same place.hermesystest1: ????? test ???.HTC Sense Util: Windows Mobile application for managing HTC Sense Tabs. The application will control sense and manage the tab control file.IdentityChecker: IdentityCheckerIndexed Material Splatting for Terrain Rendering Demo: This project is a demo using Indexed Material Splatting technique for terrain renderingIntegra: PFCKinet SDK: Kinect SDKLyra 3: Lyra is a small Windows Application to create and manage song-books. Each song-book may contain an arbitrary number of songs which can be created or edited within Lyra and projected using any screen device (e.g. a beamer). Support for full text search and presentation templates.NETWorking: NETWorking allows developers to easily integrate Internet connectivity into their applications. Be it a fault-tolerant distributed cluster or a peer-to-peer system, NETWorking exposes high-performance classes to facilitate application needs in a concise and understandable manner.RAD Platform: Rapid Application Development (RAD) Platform is a free run time report/form/chart designer and generator engine and multi-platform web/windows application servers. New generation of database independent .Net software framework. Design once, run at once on web and windows. Enjoy!Razor Repository Engine: <project name>RazorRepository</project> <programming language>C#</programming language> <activity>Finished</activity>Scientific Calculator: HTML 5 and CSS 3: Online SCIENTIFIC CALCULATOR implements latest features, available in HTML 5, CSS 3 and jQuery. Developed as Rich Internet Application (RIA) w/extremely small footprint (<20kb), it demonstrates best scripting techniques and coding practices; does not require any image files.Seguimiento Facon: Control de seguimiento faconSharePoint Social: Have you ever needed to show the facebook, twitter updates of your organization on your sharepoint portal ? If yes, this project is for you. Simple auto update tool: Makes a easy way to auto update your client software.SteelBattalion.NET: .NET-based library for interfacing with the original Steel Battalion X-Box controller. Utilizes LibUSB drivers. Works on 32-bit and 64-bit platforms, including Windows 7.SystemTimeFreezer: Freezes system datetime to some value you've selectedTeam Explorer Remover: Utility to completely remove TFS Team Explorer from VS.NET 2010. * Removes all registry entries regarding Team Explorer. * Removes all files related to Team Explorer. * Removes all VS.NET commands, menu items and hyperlinks related to Team Explorer (incl. one on StartUp page)TIMESHARE-SELLERS: TIMESHARE-SELLERSVsi Builder 2010: Vsi Builder is an extension for Visual Studio 2010 which allows packaging code snippets and old-style add-ins into .Vsi redistributable packagesWCF Peer Resolver: WCF Peer Resolver is an very extendable and simplified resolver framework to use instead of the built in CurstomPeerResolver in .Net Framework. It is completely developed in C# with .Net Framework 3.5.wsPDV2010: Primeiro desenvolvimento experimental de PDV.

  Read the article

• CodePlex Daily Summary for Thursday, November 22, 2012

  CodePlex Daily Summary for Thursday, November 22, 2012Popular ReleasesStackBuilder: StackBuilder 1.0.11.0: +Added Box/Case analysis...VidCoder: 1.4.7 Beta: Added view modes to the Preview window. Now you can see the image in 1:1 or in "Corners" mode to show a close-up of cropping results. Added the ability to set a custom completion sound. Gave the encoding settings command bar a more distinctive background color and extended it to the whole width of the window. Added the preview button to the command bar. Rearranged UI in Video tab and added back the section headers. Added the "Most" choice for the advanced x264 analysis option. Updat...ServiceMon - Extensible Real-time, Service Monitoring Utility for Windows: ServiceMon Release 1.2.0.58: Auto-uploaded from build serverImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????（◇?◆:）。 -???????????????????RecoverPropertiesFromJObject????（〓?〓、????、??、Vian_Pan）。 -????????????，?????????????，???SelectedValueArray???????（sam.chang）。 -??Alert.Show???????????（swtseaman）。 -???????????????，??Icon??IconUrl????（swtseaman）。 -?????????TimePicker（??）。 -?????????，??/res.axd?css=blue.css&v=1。 -????????，?????????????，???????。 -????MenuCheckBox（???????）。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...New Projects1122case1325: It is a codeplex project1122case1327: Never be so greedy Accommodation Portal: This is a skeleton web site for holiday home owners, who wishes to rent their holiday accommodations to visitors from around the world. Analog Clock: This is project contains analog clock made in win forms.Android Socket Plus: ????Android??????。???????Android???????Socket???，?????????（?PC?Windows????????）??????Socket???，??，????????????；??????????????Socket???，??????????????Socket???。Bancosol: PFCBig Data Twitter Demo: This demo analyzes tweets in real-time, even including a dashboard. The tweets are also archived in Azure DB/Blob and Hadoop where Excel can be used for BI!Cloud For Science: This project serves as issue tracker for C4S components, and is used by participants of the C4S project. cwt: cwtDiary Application for Elementary Student: A Simple Diary Application Made for Elementary Student. Dice Dreams: Dice Dreams Dice Dreams is a dice game , the player must get 1.000.000 point to win, you start with 100.000 point. Dynamic Entity Framework Filtering: Generates linq to Entity Framework Queries by examining the EF data model, thus allowing for code reduction for queries to commonly requested entities.EazyErp: Enterprise Resource Planning System of Vf AsiaGoPlay: Tooke - add a project description here...HMyBlog: myblogHumanitarian Toolbox: This project is the publication site for bits built by the Humanitarian Toolbox ( http://humanitariantoolbox.net/).Impulse Media Player: Impulse Media Player is the ultimate media player for WindowsInspiration.Web: Description: A simple (but entertaining) ASP.NET MVC (C#) project to suggest random code names for projects. Intended audience: People who need a name (any name) to get started with their projects. Application written during Webcamp Singapore (4th Jun 2010 - 5th Jun 2010).iPictureUploader: Simple tool to upload images onto WEB and share via blogs/forums/etc lugionline: test projectMosaic Snake 3D: A clone of the popular Snake game for Windows 8. It contains a simple 3D engine based on SharpDX and is completely written in C# and Xaml.Outage Display: A simple web-based outage displayPrestaShop free Electronic Brown Shop Template - ModuleBazaar: Check out Latest and Best Featured PrestaShop Templates, Modules Magento Extensions, Opencart Extensions, Clone scripts from ModuleBazaarRackspace Cloud Files Manager: A simple Rackspace Cloud Files manager for static websitesRoll The Dice: Roll The Dice is a simple game developed by Erika Enggar Savitri and Queen Anugerah Aguslia who are currently studying Information System at Ma Chung UniversityRussian IDM: Russian IDM is free IdM solutionshootout: Comparing the speed of different languages and the constructs available within those languagessmart messaging connector: Sending fax from a PrintDocument or a file. Sending broadcast fax. Managing (Pause/Resume/Restart) current fax job. Managing configuration of the fax serverTeen Diary: Teen Diary Software - FREEWARE SOFTWARE. - SIMPLE, LIGHTWEIGHT, PORTABLE, COMPATIBLE. - made from .NET FRAMEWORK languange with XML data. Tekapo: Tekapo is a wizard style application that will help you manage your digital photos. Most digital cameras will store images as JPEG files. Information about the camera and how the camera has taken the photo is placed into the JPEG file along with the image data. One of the pieces of information stored is the date and time that the photo was taken. Tekapo uses the picture taken date to organise the photos.The Byte Kitchen's Open Sources: This project is related to The Byte Kitchen Blog (at thebytekitchen.com). It typically deals with Windows 8 apps, DirectX, and the Kinect for Windows.TheDiary: daily-self journalWCFsample: WCFsampleXNA Game Editor: This project will has familiar features like Unity Engine Editor.

  Read the article

• Apache, Nginx, WSGI, django cookies get lost.

  - by Jack M.

  I'm running into a problem trying to get a Django application running in my staging environment. I'm running nginx as a reverse proxy with Apache 2.2/mod_wsgi as the target, and my Django app behind that. The problem is that the cookies are getting lost somewhere between nginx and Apache. My nginx.conf (ripped out a few locations to keep it small): http { gzip on; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass_header Set-Cookie; upstream django { server 127.0.0.1:8080; } server { listen 80; server_name encendio.iigins.com; location / { proxy_pass http://django; } } } My Apache vhosts file: <VirtualHost *:8080> ServerName encendio.test.com ServerAdmin [email protected] DocumentRoot "/usr/local/www/apache22/data" WSGIScriptAlias / /usr/local/www/apache22/data/sasquatch/wsgi_handler.py </VirtualHost> If I directly to http://encendio.test.com:8080/ the cookies work and I can log into the admin area. If I log into http://encendio.test.com/, the admin area tells me my browser isn't using cookies. Now things get kind of weird. I went so far as to look at the environ being passed into my wsgi_handler.py: _application = django.core.handlers.wsgi.WSGIHandler() def application(environ, start_response): print >> sys.stderr, environ.get('HTTP_COOKIE', "No Cookie") return _application(environ, start_response) It shows the cookie existing in the environment: [Mon Mar 22 12:15:50 2010] [error] csrftoken=9f2569elkj67984242f0e7a6dea0b791; sessionid=4e5432hjkds8603f26d5ffa02b10cd27 And this cookie matches up with what I see in nginx's log if I plug in $http_cookie on the end of the log. So Apache is getting the cookie in some form, but it's not ending up where Django can see it. I'm at my wit's end for why this isn't working, so any help is greatly appreciated. Ninja Edit: I forgot to mention that Firefox is seeing the cookies. The oddity is that every time I attempt to log in, I get a new sessionid.

  Read the article

• How can I programmatically unlock a Adobe DRM Epub?

  - by DEzra

  I am writing an ebook reader that supports the epub format (i have the parsing of open epub working), but I would like to support the reading of Adobe DRM locked epubs. I have read threw the adobe digital editions site (faq and support pages) and googled, but alas as yet I have not found any docs on the api to: authorise the pc using the users adobe id creds and decrypt the epub for parsing by my app. Does anyone have any pointers to docs or apis? I would prefer apis in Python, C++. But any api is better than nothing ;-) UPDATE1: i am writing my app on Desktops (linux, mac and windows)

  Read the article

• how to implement 'page break' in epub reader.

  - by ganapati

  Any idea how to implement 'page break' in epub reader? .epub is nothing but HTML pages, and epub reader renders those html pages. but i wonder how some epub readers like Adobe Digital Edition implemented page break. There,when we jump to any page, you will not find half displayed line(i.e only upper part of the letters visible and lower part will be in the next page) or half images where the other part in the next page. How to push the line to next page if i cannot display it completely in the current page?

  Read the article

• Core Location in iPhone Simulator 3.2 (iPad)

  - by choise

  So, i'm trying to port my app to iPad. I'm using CoreLocation. Apple says the iPad does have Location: Wi-Fi Digital compass Assisted GPS (Wi-Fi + 3G model) Cellular (Wi-Fi + 3G model) so it should be possible to get the position of my ipad (at least with 3g model) about 3km radius would be enought. but it doesnt work in simulator (3.2 ipad) (running 3.1.3 in simulator simulates me cupertino). is there a way to get the position in simulator (3.2 ipad) ? i live in germany and here the ipad isnt released yet, so i cannot test it on my device. thanks!

  Read the article

• Extracting ""((Adj|Noun)+|((Adj|Noun)(Noun-Prep)?)(Adj|Noun))Noun"" from Text (Justeson & Katz, 1995)

  - by ssuhan

  I would like to query if it is possible to extract ((Adj|Noun)+|((Adj|Noun)(Noun-Prep)?)(Adj|Noun))Noun proposed by Justeson and Katz (1995) in R package openNLP? That is, I would like to use this linguistic filtering to extract candidate noun phrases. I cannot well understand its meaning. Could you do me a favor to explain it or transform such representation into R language. Many thanks. Maybe we can start the sample code from: library("openNLP") acq <- "This paper describes a novel optical thread plug gauge (OTPG) for internal thread inspection using machine vision. The OTPG is composed of a rigid industrial endoscope, a charge-coupled device camera, and a two degree-of-freedom motion control unit. A sequence of partial wall images of an internal thread are retrieved and reconstructed into a 2D unwrapped image. Then, a digital image processing and classification procedure is used to normalize, segment, and determine the quality of the internal thread." acqTag <- tagPOS(acq) acqTagSplit = strsplit(acqTag," ")

  Read the article

• Puppet's automatically generated certificates failing

  - by gparent

  I am running a default configuration of Puppet on Debian Squeeze 6.0.4. The server's FQDN is master.example.com. The client's FQDN is client.example.com. I am able to contact the puppet master and send a CSR. I sign it using puppetca -sa but the client will still not connect. Date of both machines is within 2 seconds of Tue Apr 3 20:59:00 UTC 2012 as I wrote this sentence. This is what appears in /var/log/syslog: Apr 3 17:03:52 localhost puppet-agent[18653]: Reopening log files Apr 3 17:03:52 localhost puppet-agent[18653]: Starting Puppet client version 2.6.2 Apr 3 17:03:53 localhost puppet-agent[18653]: Could not retrieve catalog from remote server: SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed Apr 3 17:03:53 localhost puppet-agent[18653]: Using cached catalog Apr 3 17:03:53 localhost puppet-agent[18653]: Could not retrieve catalog; skipping run Here is some interesting output: OpenSSL client test: client:~# openssl s_client -host master.example.com -port 8140 -cert /var/lib/puppet/ssl/certs/client.example.com.pem -key /var/lib/puppet/ssl/private_keys/client.example.com.pem -CAfile /var/lib/puppet/ssl/certs/ca.pem CONNECTED(00000003) depth=1 /CN=Puppet CA: master.example.com verify return:1 depth=0 /CN=master.example.com verify error:num=7:certificate signature failure verify return:1 depth=0 /CN=master.example.com verify return:1 18509:error:1409441B:SSL routines:SSL3_READ_BYTES:tlsv1 alert decrypt error:s3_pkt.c:1102:SSL alert number 51 18509:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188: client:~# master's certificate: root@master:/etc/puppet# openssl x509 -text -noout -in /etc/puppet/ssl/certs/master.example.com.pem Certificate: Data: Version: 3 (0x2) Serial Number: 2 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: CN=Puppet CA: master.example.com Validity Not Before: Apr 2 20:01:28 2012 GMT Not After : Apr 2 20:01:28 2017 GMT Subject: CN=master.example.com Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:a9:c1:f9:4c:cd:0f:68:84:7b:f4:93:16:20:44: 7a:2b:05:8e:57:31:05:8e:9c:c8:08:68:73:71:39: c1:86:6a:59:93:6e:53:aa:43:11:83:5b:2d:8c:7d: 54:05:65:c1:e1:0e:94:4a:f0:86:58:c3:3d:4f:f3: 7d:bd:8e:29:58:a6:36:f4:3e:b2:61:ec:53:b5:38: 8e:84:ac:5f:a3:e3:8c:39:bd:cf:4f:3c:ff:a9:65: 09:66:3c:ba:10:14:69:d5:07:57:06:28:02:37:be: 03:82:fb:90:8b:7d:b3:a5:33:7b:9b:3a:42:51:12: b3:ac:dd:d5:58:69:a9:8a:ed Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE Netscape Comment: Puppet Ruby/OpenSSL Internal Certificate X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Subject Key Identifier: 8C:2F:14:84:B6:A1:B5:0C:11:52:36:AB:E5:3F:F2:B9:B3:25:F3:1C X509v3 Extended Key Usage: critical TLS Web Server Authentication, TLS Web Client Authentication Signature Algorithm: sha1WithRSAEncryption 7b:2c:4f:c2:76:38:ab:03:7f:c6:54:d9:78:1d:ab:6c:45:ab: 47:02:c7:fd:45:4e:ab:b5:b6:d9:a7:df:44:72:55:0c:a5:d0: 86:58:14:ae:5f:6f:ea:87:4d:78:e4:39:4d:20:7e:3d:6d:e9: e2:5e:d7:c9:3c:27:43:a4:29:44:85:a1:63:df:2f:55:a9:6a: 72:46:d8:fb:c7:cc:ca:43:e7:e1:2c:fe:55:2a:0d:17:76:d4: e5:49:8b:85:9f:fa:0e:f6:cc:e8:28:3e:8b:47:b0:e1:02:f0: 3d:73:3e:99:65:3b:91:32:c5:ce:e4:86:21:b2:e0:b4:15:b5: 22:63 root@master:/etc/puppet# CA's certificate: root@master:/etc/puppet# openssl x509 -text -noout -in /etc/puppet/ssl/certs/ca.pem Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) Signature Algorithm: sha1WithRSAEncryption Issuer: CN=Puppet CA: master.example.com Validity Not Before: Apr 2 20:01:05 2012 GMT Not After : Apr 2 20:01:05 2017 GMT Subject: CN=Puppet CA: master.example.com Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:b5:2c:3e:26:a3:ae:43:b8:ed:1e:ef:4d:a1:1e: 82:77:78:c2:98:3f:e2:e0:05:57:f0:8d:80:09:36: 62:be:6c:1a:21:43:59:1d:e9:b9:4d:e0:9c:fa:09: aa:12:a1:82:58:fc:47:31:ed:ad:ad:73:01:26:97: ef:d2:d6:41:6b:85:3b:af:70:00:b9:63:e9:1b:c3: ce:57:6d:95:0e:a6:d2:64:bd:1f:2c:1f:5c:26:8e: 02:fd:d3:28:9e:e9:8f:bc:46:bb:dd:25:db:39:57: 81:ed:e5:c8:1f:3d:ca:39:cf:e7:f3:63:75:f6:15: 1f:d4:71:56:ed:84:50:fb:5d Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:TRUE Netscape Comment: Puppet Ruby/OpenSSL Internal Certificate X509v3 Key Usage: critical Certificate Sign, CRL Sign X509v3 Subject Key Identifier: 8C:2F:14:84:B6:A1:B5:0C:11:52:36:AB:E5:3F:F2:B9:B3:25:F3:1C Signature Algorithm: sha1WithRSAEncryption 1d:cd:c6:65:32:42:a5:01:62:46:87:10:da:74:7e:8b:c8:c9: 86:32:9e:c2:2e:c1:fd:00:79:f0:ef:d8:73:dd:7e:1b:1a:3f: cc:64:da:a3:38:ad:49:4e:c8:4d:e3:09:ba:bc:66:f2:6f:63: 9a:48:19:2d:27:5b:1d:2a:69:bf:4f:f4:e0:67:5e:66:84:30: e5:85:f4:49:6e:d0:92:ae:66:77:50:cf:45:c0:29:b2:64:87: 12:09:d3:10:4d:91:b6:f3:63:c4:26:b3:fa:94:2b:96:18:1f: 9b:a9:53:74:de:9c:73:a4:3a:8d:bf:fa:9c:c0:42:9d:78:49: 4d:70 root@master:/etc/puppet# Client's certificate: client:~# openssl x509 -text -noout -in /var/lib/puppet/ssl/certs/client.example.com.pem Certificate: Data: Version: 3 (0x2) Serial Number: 3 (0x3) Signature Algorithm: sha1WithRSAEncryption Issuer: CN=Puppet CA: master.example.com Validity Not Before: Apr 2 20:01:36 2012 GMT Not After : Apr 2 20:01:36 2017 GMT Subject: CN=client.example.com Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:ae:88:6d:9b:e3:b1:fc:47:07:d6:bf:ea:53:d1: 14:14:9b:35:e6:70:43:e0:58:35:76:ac:c5:9d:86: 02:fd:77:28:fc:93:34:65:9d:dd:0b:ea:21:14:4d: 8a:95:2e:28:c9:a5:8d:a2:2c:0e:1c:a0:4c:fa:03: e5:aa:d3:97:98:05:59:3c:82:a9:7c:0e:e9:df:fd: 48:81:dc:33:dc:88:e9:09:e4:19:d6:e4:7b:92:33: 31:73:e4:f2:9c:42:75:b2:e1:9f:d9:49:8c:a7:eb: fa:7d:cb:62:22:90:1c:37:3a:40:95:a7:a0:3b:ad: 8e:12:7c:6e:ad:04:94:ed:47 Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE Netscape Comment: Puppet Ruby/OpenSSL Internal Certificate X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Subject Key Identifier: 8C:2F:14:84:B6:A1:B5:0C:11:52:36:AB:E5:3F:F2:B9:B3:25:F3:1C X509v3 Extended Key Usage: critical TLS Web Server Authentication, TLS Web Client Authentication Signature Algorithm: sha1WithRSAEncryption 33:1f:ec:3c:91:5a:eb:c6:03:5f:a1:58:60:c3:41:ed:1f:fe: cb:b2:40:11:63:4d:ba:18:8a:8b:62:ba:ab:61:f5:a0:6c:0e: 8a:20:56:7b:10:a1:f9:1d:51:49:af:70:3a:05:f9:27:4a:25: d4:e6:88:26:f7:26:e0:20:30:2a:20:1d:c4:d3:26:f1:99:cf: 47:2e:73:90:bd:9c:88:bf:67:9e:dd:7c:0e:3a:86:6b:0b:8d: 39:0f:db:66:c0:b6:20:c3:34:84:0e:d8:3b:fc:1c:a8:6c:6c: b1:19:76:65:e6:22:3c:bf:ff:1c:74:bb:62:a0:46:02:95:fa: 83:41 client:~#

  Read the article

• IE8 error with Certificate

  - by Jon B

  I have installed a certificate with multiple Common Names on a Red Hat server in the jks format. The web page can be accessed with Firefox and the certificate gets imported. However, IE8 gives the error "Internet Explorer cannot display the webpage". I added the cert with MMC and its properties shows "This certificate has an nonvalid digital signature.". Also the cert doesn't have the URL of the web page in it. The cert does have a valid signature in Firefox and the URL mismatch is ignored. How can I get IE8 to accept it. This cert is required for another Application (where it works fine) and cannot be changed except to change the format. I already have it in PKCS12, jks and pem formats.

  Read the article

• store everything only once, smarter

  - by hsmit

  In the digital world a lot is stored multiple times. As a thought experiment or creative challenge I want you to think about making this more efficient and maybe reuse more. Think of the following cases: an mp3 track is downloaded multiple times, copied over various devices on website a login form is often rebuild many times, why not reuse more code? words themselves are used many times questions and answers are accidentally saved at many places in parallel images or photos often describe the same data (Eiffel tower, Golden gate, Taj Mahal) etc etc Are you aware of solutions? Or are you thinking about similar topics? Ideas? Blueprints? I'd love to hear from you!

  Read the article

• USB interface barcode scanners

  - by Nimbuz

  Not exactly a programming question, but close. I'll try my luck anyway. The keyboard wedge barcode scanner inserts the translation device between the reader and the keyboard. Data sent through a wedge appears as if it was typed into the computer, while the keyboard itself remains fully functional. Because a computer using a keyboard wedge can't tell the difference between data that is entered by a scanning device, or data that is entered by keyboard typing, a wedge can be used to easily add barcode reading capability to an existing computer without modifying software applications. I'd like to know if all USB interface barcode scanners automatically translate digital signals from a barcode reader into keyboard strokes for a applications just like wedge or is USB different from wedge? Many thanks

  Read the article

• LabVIEW: converting numeric array to string array

  - by JaysonFix

  Using LabVIEW 2009, I have a VI that outputs an array of U64 integers. I'd like the user to be able to perform discrete selection from among the elements of this array. I'm thinking of accomplishing this by programmatically populating a Menu Ring (as shown at http://digital.ni.com/public.nsf/allkb/FB0409491FAB16FA86256D08004FCE7E). However, I apparently need to convert my array of U64 ints to an array of strings, as it is an array of strings that is used to populate the Menu Ring. My question: how can I convert the array of U64 ints to an array of strings?

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >