Search Results

Search found 14850 results on 594 pages for 'full decent'.

Page 520/594 | < Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >

• TCP/IP & throughput between FreeNAS (BSD) server & other LAN machines

  - by Tim Dickerson

  I have got a question for someone that knows BSD a bit better than me that are in regards to my LAN setup at home/work here outside Chicago. I can't seem to fully optimize my network's (LAN) thoughput via my FreeNAS (BSD based) file server. It runs with the latest FreeBSD release which is modified to support several protocols for file transfers and more. Every machine that is behind my Smoothwall (Linux based) router is on the usual 192.168.0.x subnet and for most part works just fine. Behind the Smoothwall box, all machines are connected to a GB HP unmanaged switch. I host a large WISP here and have an OC-3 connection here at home/work and have no issues with downloading/uploading from/to the 'net'. My problem is with throughput. When I try and transfer large files...really any for that matter..between any of the machines to/and from the FreeNAS server via FTP, the max throughput I can achieve say between a Win 7 or a Linux box is ~65Mbit/sec. All machines are running Intel Pro 1000 GB NIC's and all cable is CAT6. Each is set to 'auto negotiation' and each shows 1500 MTU Full Duplex @1GB so I know the hardware is okay. I have not adjusted the MTU on any machine as I understand it to be pointless unless certain configurations are used (I assume I am not one of those). My settings for the FreeNAS machine are the following: # FreeNAS /etc/sysctl.conf - pertinent settings shown kern.ipc.maxsockbuf=262144 kern.ipc.nmbclusters=32768 kern.ipc.somaxconn=8192 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.delayed_ack=0 net.inet.tcp.inflight.enable=0 net.inet.tcp.path_mtu_discovery=0 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.recvbuf_max=16777216 net.inet.tcp.recvspace=65536 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.sendspace=65536 net.inet.udp.recvspace=65536 net.local.stream.recvspace=65536 net.local.stream.sendspace=65536 net.inet.tcp.hostcache.expire=1 From what I can tell, that looks to be a somewhat optimized profile for a typical BSD machine acting as a server for a LAN. I might be wrong and just wanted to find out from someone that knows BSD better than I do if indeed that is ok or if something is out of tune or what. Are there other ways I would find better for P2P file transfers? I honestly do not know what I SHOULD be looking for with respect to throughput between the NAS box and another client when xferring files via FTP, but I am told that what I get on average (40-70MB/sec) is too low for what it could be. I have thought about adding another NIC in the FreeNAS box as well as the Win7 machine and use a X-over cable via a static route, but wanted to check with someone first to see if that might be worth it or not. I don't know if doing that would bypass the HP GB switch and allow for a machine to machine xfer anyways. The FTP client I use is: Filezilla and have tried both active and passive modes with no real gain over each other. The NAS box runs ProFTPD.

  Read the article

• Forwarding RDP via a Linux machine using iptables: Not working

  - by Nimmy Lebby

  I have a Linux machine and a Windows machine behind a router that implements NAT (the diagram might be overkill, but was fun to make): I am forwarding RDP port (3389) on the router to the Linux machine because I want to audit RDP connections. For the Linux machine to forward RDP traffic, I wrote these iptables rules: iptables -t nat -A PREROUTING -p tcp --dport 3389 -j DNAT --to-destination win-box iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT The port is listening on the Windows machine: C:\Users\nimmy>netstat -a Active Connections Proto Local Address Foreign Address State (..snip..) TCP 0.0.0.0:3389 WIN-BOX:0 LISTENING (..snip..) And the port is forwarding on the Linux machine: # tcpdump port 3389 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 01:33:11.451663 IP shieldsup.grc.com.56387 > linux-box.myapt.lan.ms-wbt-server: Flags [S], seq 94663035, win 8192, options [mss 1460], length 0 01:33:11.451846 IP shieldsup.grc.com.56387 > win-box.myapt.lan.ms-wbt-server: Flags [S], seq 94663035, win 8192, options [mss 1460], length 0 However, I am not getting any successful RDP connections from the outside. The port is not even responding: C:\Users\outside-nimmy>telnet example.com 3389 Connecting To example.com...Could not open connection to the host, on port 3389: Connect failed Any ideas? Update Per @Zhiqiang Ma, I looked at nf_conntrack proc file during a connection attempt and this is what I see (192.168.3.1 = linux-box, 192.168.3.5 = win-box): # cat /proc/net/nf_conntrack | grep 3389 ipv4 2 tcp 6 118 SYN_SENT src=4.79.142.206 dst=192.168.3.1 sport=43142 dport=3389 packets=6 bytes=264 [UNREPLIED] src=192.168.3.5 dst=4.79.142.206 sport=3389 dport=43142 packets=0 bytes=0 mark=0 secmark=0 zone=0 use=2 2nd update Got tcpdump on the router and it seems that win-box is sending an RST packet: 21:20:24.767792 IP shieldsup.grc.com.45349 > linux-box.myapt.lan.3389: S 19088743:19088743(0) win 8192 <mss 1460> 21:20:24.768038 IP shieldsup.grc.com.45349 > win-box.myapt.lan.3389: S 19088743:19088743(0) win 8192 <mss 1460> 21:20:24.770674 IP win-box.myapt.lan.3389 > shieldsup.grc.com.45349: R 721745706:721745706(0) ack 755785049 win 0 Why would Windows be doing this?

  Read the article

• How to bind old user's SID to new user to remain NTFS file ownership and permissions after freshly reinstall of Windows?

  - by LiuYan ??

  Each time we reinstalled Windows, it will create a new SID for user even the username is as same as before. // example (not real SID format, just show the problem) user SID -------------------- liuyan S-old-501 // old SID before reinstall liuyan S-new-501 // new SID after reinstall The annoying problem after reinstall is NTFS file owership and permissions on hard drive disk are still associated with old user's SID. I want to keep the ownership and permission setting of NTFS files, then want to let the new user take the old user's SID, so that I can access files as before without permission problem. The cacls command line tool can't be used in such situation, because the file does belongs to new user, so it will failed with Access is denied error. and it can't change ownership. Even if I can change the owership via SubInACL tool, cacls can't remove the old user's permission because the old user does not exist on new installation, and can't copy the old user's permission to new user. So, can we simply bind old user's SID to new user on the freshly installed Windows ? Sample test batch @echo off REM Additional tools used in this script REM PsGetSid http://technet.microsoft.com/en-us/sysinternals/bb897417 REM SubInACL http://www.microsoft.com/en-us/download/details.aspx?id=23510 REM REM make sure these tools are added into PATH set account=MyUserAccount set password=long-password set dir=test set file=test.txt echo Creating user [%account%] with password [%password%]... pause net user %account% %password% /add psgetsid %account% echo Done ! echo Making directory [%dir%] ... pause mkdir %dir% dir %dir%* /q echo Done ! echo Changing permissions of directory [%dir%]: only [%account%] and [%UserDomain%\%UserName%] has full access permission... pause cacls %dir% /G %account%:F cacls %dir% /E /G %UserDomain%\%UserName%:F dir %dir%* /q cacls %dir% echo Done ! echo Changing ownership of directory [%dir%] to [%account%]... pause subinacl /file %dir% /setowner=%account% dir %dir%* /q echo Done ! echo RunAs [%account%] user to write a file [%file%] in directory [%dir%]... pause runas /noprofile /env /user:%account% "cmd /k echo some text %DATE% %TIME% > %dir%\%file%" dir %dir% /q echo Done ! echo Deleting and Recreating user [%account%] (reinstall simulation) ... pause net user %account% /delete net user %account% %password% /add psgetsid %account% echo Done ! %account% is recreated, it has a new SID now echo Now, use this "same" account [%account%] to access [%dir%], it will failed with "Access is denied" pause runas /noprofile /env /user:%account% "cmd /k cacls %dir%" REM runas /noprofile /env /user:%account% "cmd /k type %dir%\%file%" echo Done ! echo Changing ownership of directory [%dir%] to NEW [%account%]... pause subinacl /file %dir% /setowner=%account% dir %dir%* /q cacls %dir% echo Done ! As you can see, "Account Domain not found" is actually the OLD [%account%] user echo Deleting user [%account%] ... pause net user %account% /delete echo Done ! echo Deleting directory [%dir%]... pause rmdir %dir% /s /q echo Done !

  Read the article

• Resizing Partitions on Live RHEL/cPanel Server

  - by Timothy R. Butler

  I've resized many partitions over the years on Linux, Windows and Mac OS X -- but always using a GUI. However, the time has come where the preset partition sizes my data center placed on my server aren't the right sizes and I need to resize a production server's disks. I could fiddle with it and probably do OK, but given that it is a production server, I wanted to get some advice about the right way to do this. I do have KVM over IP access, so if it is best to take the server offline and boot off a rescue partition, I can do that. root [/var/lib/mysql]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 2.1G 7.3G 23% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 99M 77M 18M 82% /boot /dev/sda8 884G 463G 376G 56% /home /dev/sda3 9.9G 8.0G 1.5G 85% /usr /dev/sda5 9.9G 9.1G 308M 97% /var /usr/tmpDSK 2.0G 38M 1.8G 3% /tmp As you can see /var and /usr are quite close to being full and I've actually had to symlink some logs on /usr to directories in /home to balance things out. What I would like to do is to add 6-10 GB each to /usr and /var, presumably taking the space from /home. As I think about how the disk is arranged, the best thought I've come up with is to reduce /home by 16 GB, say, and move /var to the spot freed up, then allocating /var's space to /usr. However, that would put /var at the far end of the disk, which seems less than idea, given that MySQL has all of its data on that partition. I'd love to take the space out of the closer end of /usr, but I assume that would take a very arduous (and perhaps risky) process of moving all of the data in /usr around. I seem to recall having such a process fail for me on a computer in the past. The other option might be to merge / and /usr since / is underutilized, though I'm not sure if that's a good idea. Do you have any suggestions both on the best reallocation plan and the commands to use to accomplish it? UPDATE: I should add -- here's the partition table. There's one unused partition, which, if memory serves, was the original tmp location before I created a tmp image: Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ Unusable 1.05* sda1 Boot Primary Linux ext2 106.96* sda2 Primary Linux ext3 10737.42* sda3 Primary Linux ext3 10737.42* sda5 NC Logical Linux ext3 10738.47* sda6 NC Logical Linux swap / Solaris 2148.54* sda7 NC Logical Linux ext3 1074.80* sda8 NC Logical Linux ext3 964098.53*

  Read the article

• Avoid read-write access to bad sectors on HDD to continue working on the HDD

  - by goldenmean

  I have a HP Pavilion dv6446 notebook. It had Windows Vista Home premium. After 4.5+ years of usage, just recently it started malfunctioning. While working fine, its screen goes white or sometimes some thin black lines horizontally. Laptop freezes. Hard reboot works. Again it works for some 2 hrs or so, same error. To diagnose I did run the Memory and Hard disk check which is present in the Bios Setup. Memory test passed. Hard disk test returned an error saying something like - "Replace the hard disk". Bad.. Some sectors or platters have gone bad on the disk. (I confirmed this later by further tests mentioned below) Then I tried installing a Ubuntu 11.10. It listed 3 partitions /dev/sda1, sda2, sda2. It again gave error and could not install grub loader on /dev/sda1. Bad sectors. Then redid the Ubuntu installation, this time asked to to install the Ubuntu on /dev/sda3. and kept /dev/sda1 for /home. Installed fine, and works fine as well. Due to unavailability of WiFi/ Ethernet driver for that adapters under Ubuntu( at least I could not configure them and get the networking working at all), I decided to go back to reinstall windows Vista. It did install fine. I did not have to format one data partition which has my data. I just formatted one partition which installed Windows So in effect HDD has not undergone a full format here. Worked ok for 1 day. But same white screen and freeze happened. Looks like while it is in use, it accesses the bad sectors for storing some data and that's when it bombs. I am inclined to think HDD has not failed fully or crashed but has developed bad sectors. Else if it was a HDD crash, it would have refused to boot at all let alone install on it. Questions: Is there any HDD test check under windows or any such tools windows/linux based ewhere which can identify the bad sectors of the HDD and 'lock/isolate' them from further read-write access of any kind. If not what are my options, if any to salvage this laptop HDD without replacing it. EDIT: Would the Disk Error checking tool under windows help in any way?

  Read the article

• Adobe Reader not loading form content

  - by wullxz

  We have an FDL file which is used to offer an online application possibility. The FDL is filled out and sent to a mailbox. When I open the received file, Adobe Reader starts, loads the document in Internet Explorer (had to change my default browser because it doesn't work in chrome - the customer uses IE as default) and displays a warning that Adobe Reader has blocked the connection to the server where the initial document is saved: I can then click on "Trust this document once" (translated by me!) or "Add this host to trusted hosts" (also translated by me!). The second option doesn't work at all. The first option works but is a little bit annoying. I looked into Adobe Readers options (Edit - "Voreinstellungen" in german / the last option - Security (advanced)) and found the possibility to add hosts, files and directories or allow Adobe Reader to use the "Trusted Websites" list from Internetoptions. When I add the website either to Trusted Websites or the trusted list in Adobe Readers options, the warning doesn't pop up but the content in the prefilled (by the applicant) input boxes of the document doesn't show up on Windows 7 but it does show up on Windows XP. This Screenshot shows the settings window described in the last paragraph. The big input box at the bottom normally holds the trusted files/directories/hosts list. System Information: Windows 7 Enterprise x64 Adobe Reader X multiple IE versions (mine is latest but there's also IE 7 or 8) How do I get Adobe Reader to load the content of the form? This behaviour can be reproduced on a PC. When opening an fdf from a command line the form fields are blank even though there is data in the fdf and the pdf is located in a mnaully entered trsuted folder. Steps to reproduce: Clean install a Windows 7 PC (or use a virtual box) Map a network drive to a shared folder with a subfolder e.g. c:\test\docs becomes m:\docs Set security permissions to allow full control to everyone Add an fdf and a matching pdf file in the subfolder Manually add m:\docs to each of the trusted folders in the trust manager registry settings Ensure that Enhanced Security is on Run a command line to open the fdf file Expected result: pdf is opened in Adobe Reader with form fields filled out with data Actual results: pdf is opened with blank fields 'Yellow bar' appears asking to add document to trusted locations It appears that Adobe Reader XI is ignoring the privileged locations entries in the registry. Adding the document via the 'yellow bar' adds the individual document, with the same folder, to the privileged locations but means that the process has to be repeated for every document that needs to be opened from the folder.

  Read the article

• Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

  - by BraeburnDev

  I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

  Read the article

• Buying a new printer instead of replacing ink?

  - by Kelsey

  With prices of basic printers being around $40 - $50 and a ink cartridge being around $20 - $30 each for black AND color. It costs me more to replace the printer's ink than to just buy a brand new printer. This just seems like a total waste of materials though (I have 4 printers sitting in my basement with no ink). I know the ink cartridges are smaller (not as full) in a new printer but I go through it in about 1 to 1.5 years only and by then my $40 gets me a better printer to boot. Also with certain printers the heads are not part of the ink (Epson use to do this and still might) so I get new heads as well. Is this a bad practice? Are retailers making this a reality when they are selling working hardware cheaper than replacement parts? Is there something more I should be considering? Edit: Some background, long ago I bought an Epson printer which I used to print docs etc vary rarely. The ink started running low so I bought to new carts for around $60 if I recall. The printer then stopped working so I replaced the carts with the new ones but the head was dead on the black which was not worth repairing. I bought a new HP printer for $49. This lasted around 1.5yrs and then the ink ran out, I went to buy new carts and the guy at the store got me to buy a new printer (that was smaller, faster, higher dpi, etc) and it was cheaper than replacing the ink. When the ink ran out on that one I bought a new printer again, etc. The printer gets used maybe once a week at most and I never print photos or anything. It normally is jsut stored away unplugged accumulating dust. People say to buy a laser printer but they are much larger, do not print color, (in the price range I am looking at) and might have the exact same issues. The problem I see is the manufacturer is making my behaviour possible by selling new printers at a loss hoping that they will cash in on the ink later. How can they produce a printer for so cheap which HAS ink in it, and the refills cost more than the unit? It can't.

  Read the article

• NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

  - by Corey Kennedy

  What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help! edit: 1/19/2011 Well, this is truly bizarre. To my knowledge I've made no changes to either system - the laptop or the server. But today after starting up the server for the first time in a few days, and making sure that nxserver was running, I was able to connect with the nxclient from my laptop with no problems. I have a full desktop in a single window and I am able to interact with it normally. This is really weird, but the problem seems to be resolved.

  Read the article

• Strange permission errors with Windows Server 2008

  - by Spirit

  I just don't know a better way to describe my issue that is driving me nuts. I am trying to establish a test domain with virtual machines on a box that has Win7 with VMwware workstation installed. The purpouse with this domain will be so that we can try and test different situations before they go into the production network. I build a VM with WinSrv2008R2 and I am using that VM as a template to make other servers for the domain by making clones of it. Now I raise a DC with one clone and a member server with another clone - I add the server to the domain. I am following a standard procedure as always (it is not my first domain). Then I make an admin account and I am adding the admin to be a member of the Domain and Enterprise Admins group. That admin is admin with full priviledges on the DC.. no problem there. But on the other server has ... somewhat half the privileges and I cant log in via RDP. I tryed with another account. Same issues. For example (with half the privileges): I can't open the Even Viewer if I go via Start - Administrative Tools - Event Viewer. But I can open the Even Viewer via the server manager. You can notice this on the image below. I mean WTF??? I am going crazy, I haven't experienced anything similar in my three years of expertise. I already lost 3 days troubleshooting this. Could this be related with the cloning? Perhaps if I make fresh installs of WinSrv2008 there won't be any problems? I've had raised test domains as VMs on other occasions before, and there weren't any problems then. This is VMware Workstation 8. I've made clones before, on Workstation 7 it didn't had any problems. Anyone has any ideas? UPDATE: This is the info from the event log when I try to access via RDP: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: pat.coleman Account Domain: lab Failure Information: Failure Reason: Domain sid inconsistent. Status: 0xc000006d Sub Status: 0xc000019b

  Read the article

• 64-bit linux kernel only seeing 3 of 4GB after upgrade...

  - by Blaine

  Hey everyone. I am running Ubuntu 9.04 64-bit on my macbook. I had 2GB of ram before, and everything ran great. I just upgraded to 2x2GB (4GB), but my system only sees 3GB of it. OS X, which I am dual booting, sees all 4GB. Also, my video performance is incredibly lacking. Before the upgrade my compiz benchmark was full at 80fps, and now it is at 22fps with very choppy window dragging. Has anyone ever heard of this on a 64-bit kernel? I just don't quite understand what could be the issue. 10$ uname -a Linux macbook 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 19:25:34 UTC 2009 x86_64 GNU/Linux $ free -m total used free shared buffers cached Mem: 2953 1031 1921 0 114 427 -/+ buffers/cache: 489 2463 Swap: 7812 0 7812 9$ lsmod Module Size Used by i915 77960 2 drm 123232 3 i915 binfmt_misc 18572 1 ppdev 16904 0 btusb 21784 2 bridge 63776 0 stp 11140 1 bridge bnep 22912 2 vboxnetadp 109356 0 vboxnetflt 116972 0 vboxdrv 1721612 1 vboxnetflt uvcvideo 69640 0 compat_ioctl32 18304 1 uvcvideo videodev 45184 2 uvcvideo,compat_ioctl32 v4l1_compat 23940 2 uvcvideo,videodev lp 19588 0 parport 49584 2 ppdev,lp snd_hda_intel 557492 3 snd_pcm_oss 52352 0 snd_mixer_oss 24960 1 snd_pcm_oss snd_pcm 99464 2 snd_hda_intel,snd_pcm_oss arc4 10240 2 snd_seq_dummy 11524 0 ecb 11392 2 snd_seq_oss 41984 0 snd_seq_midi 15744 0 snd_rawmidi 33920 1 snd_seq_midi snd_seq_midi_event 16512 2 snd_seq_oss,snd_seq_midi snd_seq 66272 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event ath9k 310584 0 snd_timer 34064 2 snd_pcm,snd_seq snd_seq_device 16276 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq mac80211 251528 1 ath9k iTCO_wdt 21712 0 iTCO_vendor_support 12420 1 iTCO_wdt joydev 20992 0 video 29204 0 snd 78920 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device applesmc 37700 0 output 11648 1 video soundcore 16800 1 snd pcspkr 11136 0 cfg80211 43680 1 mac80211 appletouch 19972 0 isight_firmware 11520 0 input_polldev 12688 1 applesmc intel_agp 39408 1 snd_page_alloc 18704 2 snd_hda_intel,snd_pcm led_class 13064 2 ath9k,applesmc hid_apple 15872 0 usbhid 47040 0 ohci1394 42164 0 ieee1394 108288 1 ohci1394 sky2 63364 0 fbcon 49792 0 tileblit 11264 1 fbcon font 17024 1 fbcon bitblit 14464 1 fbcon softcursor 10368 1 bitblit Some information from dmesg: [ 795.820163] ACPI: EC: GPE storm detected, transactions will use polling mode [ 1762.709516] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 1763.078130] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 2362.760889] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 2416.352084] ACPI: EC: missing confirmations, switch off interrupt mode. [ 3718.721095] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 3719.108914] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 4318.773266] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 9513.813066] CE: hpet increasing min_delta_ns to 15000 nsec [ 9693.815684] npviewer.bin[6736]

  Read the article

• How to know the source of certain TCP traffic on AIX

  - by A.Rashad

  We have two AIX boxes, one for production system and another for testing. both systems are running ATM machine switches, where the ATM device is connected via TCP socket. we had an issue on production system where the machine would power off or get disconnected but the netstat -na | grep <IP of machine > would still mention that the socket is up when simulated that case on the UAT environment, the problem did not happen, where the socket would terminate in 3 to 5 minutes. when sniffed on the traffic between the machine and ATM we found that no traffic takes place on production while there is some sort of heartbeat on UAT. but it is not initiated by the application. $>tcpdump | grep -v "10.2.2.71" | grep -v "HSRP" | grep "10.3.1.30" tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on en6, link-type 1, capture size 96 bytes 09:08:13.323421 IP server073.afs3-callback > 10.3.1.30.impera: . 278204201:278204202(1) ack 3307884029 win 164 09:08:13.335334 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:08:23.425771 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:08:23.425789 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 09:09:13.628985 IP server073.afs3-callback > 10.3.1.30.impera: . 0:1(1) ack 1 win 164 09:09:13.633900 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:09:23.373634 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:09:23.373647 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 while on production, that traffic is not there. we want to know where this traffic is initiated from to implement on production to sense disconnection our comms parameters are: tcp_keepcnt = 2 tcp_keepidle = 100 tcp_keepinit = 150 tcp_keepintvl = 150 tcp_finwait2 = 1200 can anyone help?

  Read the article

• Revolutionary brand powder packing machine price from affecting marketplace boom and put on uniform in addition to a lengthy service life

  - by user74606

  In mining in stone crushing, our machinery company's encounter becomes much more apparent. As a consequence of production capacity in between 600~800t/h of mining stone crusher, stone is mine Mobile Cone Crushing Plant Price 25~40 times, effectively solved the initially mining stone crusher operation because of low yield prices, no upkeep problems. Full chunk of mining stone crusher. Maximum particle size for crushing 1000x1200mm, an effective answer for the original side is mine stone provide, storing significant chunks of stone can not use complications in mines. Completed goods granularity is modest, only 2~15mm, an effective option for the original mine stone size, generally blocking chute production was an issue even the grinding machine. Two types of material mixed great uniformity, desulfurization of mining stone by adding weight considerably. Present quantity added is often reached 60%, effectively minimizing the cost of raw supplies. Electrical energy consumption has fallen. Dropped 1~2KWh/t tons of mining stone electrical energy consumption, annual electricity savings of one hundred,000 yuan. Efficient labor intensity of workers and also the atmosphere. Due to mine stone powder packing machine price a high degree of automation, with out human make contact with supplies, workers working circumstances enhanced significantly. Positive aspects, and along with mine for stone crushing, CS series cone Crusher has the following efficiency traits. CS series cone Crusher Chamber is divided into 3 unique designs, the user is usually chosen in accordance with the scenario on site crushing efficiency is high, uniform item size, grain shape, rolling mortar wall friction and put on uniform in addition to a extended service life of crushing cavity-. CS series cone Crusher utilizes a one of a kind dust-proof seal, sealing dependable, properly extend the service life of the lubricant replacement cycle and parts. CS series Sprial Sand washer price manufacture of important components to choose unique materials. Each and every stroke left rolling mortar wall of broken cone distances, by permitting a lot more products into the crushing cavity, as well as the formation of big discharge volume, speed of supplies by way of the crushing Chamber. This machine makes use of the principle of crushing cavity, also as unique laminated crushing, particle fragmentation, so that the completed product drastically improved the proportions of a cube, needle-shaped stones to lower particle levels extra evenly.

  Read the article

• PC monitors shut off and system hangs while playing 3D games, but sound continues - Diagnosis?

  - by Jon Schneider

  Two days ago, I started running into a problem with my Windows PC: The PC's two connected monitors simultaneously lose signal and go black (as though the PC had been powered off). The keyboard's Numlock, Capslock, and Scroll Lights will become "stuck" in their current positions, as though the PC is hung. (For example, the Numlock light on the keyboard remains lit regardless of me pressing the Numlock key repeatedly.) No keyboard input does anything. (Ctrl+Alt+Del, Ctrl+Shift+Esc, Ctrl+C, etc.) However -- Whatever sound/music the PC was playing continues to play, and the PC's fans continue running, so the PC hasn't powered itself off or rebooted itself. Opening up the case, the graphics card is pretty hot to the touch. I had this happen 3 times in one evening. In all cases, I was playing a game with 3D graphics when the problem occurred (Torchlight, Minecraft, Magic: The Gathering 2012, Avadon: The Black Fortress demo). I have yet to have the problem happen when I'm not playing a game. This system has been running stable for about 2.5 years prior to this. I didn't make any changes to the system prior to the problem starting to occur. System specs: OS: Windows 7 64-bit Processor: Intel Core 2 Duo E7200 Wolfdale 2.53GHz Video Card: XFX GeForce 9800 GT 512 MB Motherboard: Foxconn P45A-S LGA 775 Intel ATX RAM: Corsair 4 GB (2x 2GB) DDR2-800 (PC2 6400) Full specs: New PC 2008 Troubleshooting tried so far (the problem occurred again after taking each of these steps, one at a time): Updated the video drivers with the latest drivers from NVidia's site. Opened up the case and cleaned out the video card and processor fans (both were pretty dirty). Installed and ran temperature monitor software. The processor idles at about 50 degrees C, and goes up to about 63 degrees C while playing a game (seems on the warm side, but not excessively so?). The software wasn't able to report the temperature of the GPU -- not sure this particular GPU supports software temperature readout? My initial diagnosis is that maybe the GPU is on its last legs (given that it seems to be running pretty hot, and the problem only occurs while playing 3D games). Does this seem likely? Or is it likely that this problem is caused by the processor, RAM, or motherboard? Or could this be a software issue of some kind? Thanks for any advice!

  Read the article

• How to move Mailboxes over from old Exchange 2007 to new EBS 2008 network?

  - by Qwerty

  Hi all, This q is similar to: http://serverfault.com/questions/39070/how-to-move-exchange-2003-mailbox-or-store-from-2003-to-2007-on-separate-networks Basically I am trying to move our exchange mailboxes over to a test domain that is hosting EBS2008 with Exchange 2007. We plan to move as soon as we can when we have our exchange data over. I have tried moving a db with mailboxes over but cannot get it to mount in the new Exchange in any way possible, including mounting it onto a recovery store. From my understanding the ONLY prerequisite for moving Exchange DBs across is that it must have the same Organizational name (unlike previous versions of Exchange). If anyone has any insight as to why I cannot mount and simply reattach the mailboxes, please give me an idea as to what could be wrong. It should be as simple as this. Note that the DBs I have are in a clean state. I cannot use ExMerge because I am not running any mailboxes on 2003. I have also tried using a 32bit Vista machine with the Export-Mailbox cmdlet to extract mailboxes but anything I do to it results in Permission errors. I have tried to troubleshoot these with no success. I am running in full admin with proper exchange roles and yet it still gives me access denied errors: Export-Mailbox : MapiExceptionNetworkError: Unable to make admin interface conn ection to server. (hr=0x80040115, ec=-2147221227) Also some errors show in the management console: get-MailboxDatabase Completed Warning: ERROR: Could not connect to the Microsoft Exchange Information Store service on server TATOOINE.baytech.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server TATOOINE.baytech.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords. Why I have to use a 32bit machine to export a simple .pst file is beyond me... So yeah I am now out of ideas and any help would be great! Thanks in advance.

  Read the article

• Updating the $PATH for running an command through SSH with LDAP user account

  - by Guillaume Bodi

  Hi all, I am setting up a Mac OSX 1.6 server to host Git repositories. As such we need to push commits to the server through SSH. The server has only an admin account and uses a user list from a LDAP server. Now, since it is accessing the server through a non interactive shell, git operations are not able to complete since git executables are not in the default path. As the users are network users, they do not have a local home folder. So I cannot use a ~/.bashrc and the like solution. I browsed over several articles here and there but could not get it working in a nice and clean setup. Here are the infos on the methods I gathered so far: I could update the default PATH environment to include the git executables folder. However, I could not manage to do it successfully. Updating /etc/paths didn't change anything and since it's not an interactive shell, /etc/profile and /etc/bashrc are ignored. From the ssh manpage, I read that a BASH_ENV variable can be set to get an optional script to be executed. However I cannot figure how to set it system wide on the server. If it needs to be set up on the client machine, this is not an acceptable solution. If someone has some info on how it is supposed to be done, please, by all means! I can fix this problem by creating a .bashrc with PATH correction in the system root (since all network users would start here as they do not have home). But it just feels wrong. Additionally, if we do create a home folder for an user, then the git command would fail again. I can install a third party application to set up hooks on the login and then run a script creating a home directory with the necessary path corrections. This smells like a backyard tinkering and duct tape solution. I can install a small script on the server and ForceCommand the sshd to this script on login. This script will then look for a command to execute ($SSH_ORIGINAL_COMMAND) and trigger a login shell to run this command, or just trigger a regular login shell for an interactive session. The full details of this method can be found here: http://marc.info/?l=git&m=121378876831164 The last one is the best method I found so far. Any suggestions on how to deal with this properly?

  Read the article

• USB Flash not recognised by Windows and BIOS, but works fine in Linux

  - by bbalegere

  I have a Transcend JetFLash 2GB USB Drive.It was working fine and I had been using it occasionally. All of sudden it stopped working in all versions of Windows . The USB Drive is also not recognised by the BIOS.It does not show in the list of bootable devices.(It used show up in the list earlier) However the USB Drive works fine in my Linux Mint 11 OS. Running dmesg gives this [ 941.812192] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 941.936178] usb 1-2: device descriptor read/64, error -71 [ 942.164188] usb 1-2: device descriptor read/64, error -71 [ 942.380189] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 942.504138] usb 1-2: device descriptor read/64, error -71 [ 942.732179] usb 1-2: device descriptor read/64, error -71 [ 942.948154] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 943.364134] usb 1-2: device not accepting address 6, error -71 [ 943.476172] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 943.892140] usb 1-2: device not accepting address 7, error -71 [ 943.892191] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 944.296190] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 944.438251] usb 2-2: not running at top speed; connect to a high speed hub [ 944.709928] usbcore: registered new interface driver uas [ 944.729999] Initializing USB Mass Storage driver... [ 944.730509] scsi6 : usb-storage 2-2:1.0 [ 944.730908] usbcore: registered new interface driver usb-storage [ 944.730917] USB Mass Storage support registered. [ 945.736320] scsi 6:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2 [ 945.744547] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 945.753316] sd 6:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB) [ 945.758274] sd 6:0:0:0: [sdb] Write Protect is off [ 945.758288] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 945.765167] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.765181] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 945.784309] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.784323] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.239512] sdb: sdb1 [ 946.257279] sd 6:0:0:0: [sdb] No Caching mode page present [ 946.257292] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.257302] sd 6:0:0:0: [sdb] Attached SCSI removable disk Looks like there is something wrong the USB Drive.It is not recognised in any computer running Windows. Is there any way to fix this? Any idea why this problem occurred ?

  Read the article

• Internet Working, Browsing Not.

  - by jeffreypriebe

  I have a very odd problem that I can't resolve. I am connected to the internet, but my browsing doesn't work. I don't mean a web browser - I mean browsing. Firefox, Chrome, Curl all fail to successfully connect to an HTTP address. However existing connections, e.g. to mail in Outlook (Exchange Server and also IMAP server) continue to work. Also, the internet is on, I can confirm both from my machine (other ports / connections) as well as from any other computer connected to the same network. Additionally, it appears to be HTTP, not simple a port issue as HTTP over port 8443 (Tortoise SVN if you must know - running over HTTP not over SVN) also fails. I am using Windows Vista SP2 (build 6002). It seems to "creep up" in that after running the computer for a few hours it will fail. (No found way to systematically reproduce the problem.) Additionally, it seems to be more prone on days where the internet connection is flaky already (not sure why the internet is flaky, just is, lot's of failed browsing requests and have to retry/reload often). What I have tried (when the problem arises) - none have yielded any resolution: Resetting the network connection (dis-connect, re-connect) Disable/re-enable the network adapter Double-checked the ip settings Double-checked the HOSTS file. Note: DNS continues to work (both new and cached responses to DNS queries). (Thanks for the suggestion Daniel and antenore.) Checked the routing tables (ip4 only as ipv6 is beyond my understanding) resetting all involved hardware (routers and modems) Close and reopen browsers Looked for malware interference: Run HijackThis Looked for suspicious processes using SysInternals procexp. Looked for explorer hijacks, lsa provider interference, winsock provider interference using SysInternals Autoruns. Run a complete anti-virus scan. Reviewed the output of a netstat -onab to see if there were stuck ports open or unusual processes running somewhere The only thing that works is to do a full reboot. That works 100% of the time to restore browsing. What else can I try to nail down the problem?

  Read the article

• Problems when trying to connect to a router wirelessly

  - by Ruud Lenders

  The situation - At my girlfriend's parents' place there are six Windows 7 devices that are wired or wireless connected to a router: 3 dekstops and 3 laptops. There are also several smartphones using the router. The router is secured with WPA2 (AES). The problem - We never had any problems with the router for over a year. But recently - about 3 weeks ago - my girlfriend's laptop (HP) and my laptop (ASUS) started to develop problems while trying to connect to the router. The router has stopped showing up from the network list. Sometimes it comes back and shows up, but then it keeps saying something along the lines of "Could not connect", and not long after that it dissapears again. The range of the router is not the problem here, because we experience the same when we sit next to the router. Sometimes, if we are lucky, and waited a long time (10-15 minutes) without using the laptop for anything, the laptop will eventually succesful connect to the router. The attempts - Of course, the Window 7 troubleshooter. We tried troubleshooting the connection problems and the wireless network adapter, but no luck. We also reset the router enough times to know that's not helping either. Here's the full list of things we tried, but did not help: Running the Windows 7 troubleshooter Resetting the router (more than once) Setting the router settings to factory defaults Disconnecting all other devices except one laptop Applying a system restore Trying static/dynamic IP/DNS - Dynamic is better, right? Enabling/disabling IPv6 - Should I keep IPv6 disabled? Running the command: netsh wlan stop hostednetwork Running the command: netsh wlan set hostednetwork mode=disallow Updating/reïnstalling wireless adapter drivers The tests - To help finding the core of the problem, we tested the following: Plugging an ethernet cable in the router and in our laptops - worked fine Connecting someone else's laptop to the router (wireless) - worked fine Connecting our laptops to someone else's router - worked fine The router - This information might be relevant: Router model: Sitecom 300N Wireless Router Router hardware: version 01 The DCHP Server's IPs range from 192.168.0.100 to 192.168.0.200. Router settings: Wireless channel: 12 Channel bandwidth: 20/40 MHz Extension channel: 8 Preamble type: Long 802.11g protection: Disabled UPnP: Enabled The laptops - If you are wondering about our laptops: My laptop model: ASUS Pro64JQ Girlfriend's laptop: HP Pavillion G6 OS: Both Windows 7 Professional x64 - with Service Pack 1 My wireless adapter: Atheros AR9285 AdHoc 11n: Enabled The question - Does anyone have experienced the same problems as I do? Or does someone know how to solve this? Are there more tricks I can try, or settings I should change? Note - Our laptops are not slow or old. My laptop is 1.5 years old, and the other laptop is just 5 months old. I know how to keep laptops clean and I'm pretty sure both laptops are not bloated with useless software.

  Read the article

• Expectations for NTFS file recovery

  - by Fred Hamilton

  Yesterday I booted my XP system, and as I looked up a minute later I saw the light blue screen and tail-end of that pre-boot diskcheck Windows sometimes does if it finds an error (or was previously told to run a diskcheck drung the next boot). I didn't worry about it at the moment... But then I looked at my "scratch" disk, which was a 70% full, 750GB hard disk...and it now looks like it has been freshly formatted. It doesn't have a single file on it, just the hidden "System Volume Information" file and 750GB of freedom from data. I looked at some of the recovery tools from the Free NTFS partition recovery question and decided to try PC INSPECTOR™ File Recovery 4.x initially. It ran overnight and afterwards returned a list of thousands of files it could recover. The odd thing was that the filenames were lost, but the file extensions were not (WTF?). And all of the files were exactly 1,472kB in size. I recovered a dozen PDFs as a test, and 80% of them displayed OK despite being padded out to 1.5MB (though I assume any files 1472kB are hosed). My primary question is: Is this the best I can expect from any file recovery software when trying to recover NTFS files? Or is there perhaps something better out there? I assume this is as good as it gets, but wanted to check in with the experts first. Bonus questions: What might have happened to my drive? I didn't intentionally format it. I've never seen a disk error cause the drive to suddenly become a clean, reformatted drive. Could some malicious/confused software have told my PC to format my disk on reboot? Is that even a function Windows XP has? Why can the file extensions be recovered but not the filename? Does NTFS really treat them as separate entities? I thought I had 8.3 naming turned off, but maybe that had something to do with it. Or maybe it looks at the data in the file and guesses the extension?

  Read the article

• Mod_rewrite with UTF-8 accent, multiviews , .htaccess

  - by GuruJR

  Problem: with Mod_rewrite, multiview & Apache config Introduction: The website is in french and i had problem with unicode encoding and mod_rewrite within php wihtout multiviews Old server was not handling utf8 correctly (somewhere between PHP, apache mod rewrite or mysql) Updated Server to Ubuntu 11.04 , the process was destructive lost all files in var/www/ (the site was mainly 2 files index.php & static.php) lost the site specific .Htaccess file lost MySQL dbs lost old apache.conf What i have done so far: What works: Setup GNutls for SSL, Listen 443 = port.conf Created 2 Vhosts in one file for :80 and :443 = website.conf Enforce SSL = Redirecting :80 to :443 with a mod_rewrite redirect Tried to set utf-8 everywhere.. Set charset and collation , db connection , mb_settings , names utf-8 and utf8_unicode_ci, everywhere (php,mysql,apache) to be sure to serve files as UTF-8 i enabled multiview renamed index.php.utf8.fr and static.php.utf8.fr With multiview enabled, Multibytes Accents in URL works SSL TLS 1.0 What dont work: With multiview enabled , mod_rewrite works for only one of my rewriterules With multiview Disabled, i loose access to the document root as "Forbidden" With multiview Disabled, i loose Multibytes (single charater accent) The Apache Default server is full of settings. (what can i safely remove ?) these are my configuration files so far :80 Vhost file (this one work you can use this to force redirect to https) RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} LanguagePriority fr :443 Vhost file (GnuTls is working) DocumentRoot /var/www/x ServerName example.com ServerAlias www.example.com <Directory "/var/www/x"> allow from all Options FollowSymLinks +MultiViews AddLanguage fr .fr AddCharset UTF-8 .utf8 LanguagePriority fr </Directory> GnuTLSEnable on GnuTLSPriorities SECURE:+VERS-TLS1.1:+AES-256-CBC:+RSA:+SHA1:+COMP-NULL GnuTLSCertificateFile /path/to/certificate.crt GnuTLSKeyFile /path/to/certificate.key <Directory "/var/www/x/base"> </Directory> Basic .htaccess file AddDefaultCharset utf-8 Options FollowSymLinks +MultiViews RewriteEngine on RewriteRule ^api/$ /index.php.utf8.fr?v=4 [L,NC,R] RewriteRule ^contrib/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^coop/$ /index.php.utf8.fr?v=3 [L,NC,R] RewriteRule ^crowd/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^([^/]*)/([^/]*)$ /static.php.utf8.fr?VALUEONE=$2&VALUETWO=$1 [L] So my quesiton is whats wrong , what do i have missing is there extra settings that i need to kill from the apache default . in order to be sure all parts are using utf-8 at all time, and that my mod_rewrite rules work with accent Thank you all in advance for your help, I will follow this question closely , to add any needed information.

  Read the article

• PPTP VPN Not Working - Peer failed CHAP authentication, PTY read or GRE write failed

  - by armani

  Brand-new install of CentOS 6.3. Followed this guide: http://www.members.optushome.com.au/~wskwok/poptop_ads_howto_1.htm And I got PPTPd running [v1.3.4]. I got the VPN to authenticate users against our Active Directory using winbind, smb, etc. All my tests to see if I'm still authenticated to the AD server pass ["kinit -V [email protected]", "smbclient", "wbinfo -t"]. VPN users were able to connect for like . . . an hour. I tried connecting from my Android phone using domain credentials and saw that I got an IP allocated for internal VPN users [which I've since changed the range, but even setting it back to the initial doesn't work]. Ever since then, no matter what settings I try, I pretty much consistently get this in my /var/log/messages [and the VPN client fails]: [root@vpn2 ~]# tail /var/log/messages Aug 31 15:57:22 vpn2 pppd[18386]: pppd 2.4.5 started by root, uid 0 Aug 31 15:57:22 vpn2 pppd[18386]: Using interface ppp0 Aug 31 15:57:22 vpn2 pppd[18386]: Connect: ppp0 <--> /dev/pts/1 Aug 31 15:57:22 vpn2 pptpd[18385]: GRE: Bad checksum from pppd. Aug 31 15:57:24 vpn2 pppd[18386]: Peer armaniadm failed CHAP authentication Aug 31 15:57:24 vpn2 pppd[18386]: Connection terminated. Aug 31 15:57:24 vpn2 pppd[18386]: Exit. Aug 31 15:57:24 vpn2 pptpd[18385]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: Client 208.54.86.242 control connection finished Now before you go blaming the firewall [all other forum posts I find seem to go there], this VPN server is on our DMZ network. We're using a Juniper SSG-5 Gateway, and I've assigned a WAN IP to the VPN box itself, zoned into the DMZ zone. Then, I have full "Any IP / Any Protocol" open traffic rules between DMZ<--Untrust Zone, and DMZ<--Trust Zone. I'll limit this later to just the authenticating traffic it needs, but for now I think we can rule out the firewall blocking anything. Here's my /etc/pptpd.conf [omitting comments]: option /etc/ppp/options.pptpd logwtmp localip [EXTERNAL_IP_ADDRESS] remoteip [ANOTHER_EXTERNAL_IP_ADDRESS, AND HAVE TRIED AN ARBITRARY GROUP LIKE 5.5.0.0-100] Here's my /etc/ppp/options.pptpd.conf [omitting comments]: name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 192.168.200.42 # This is our internal domain controller ms-wins 192.168.200.42 proxyarp lock nobsdcomp novj novjccomp nologfd auth nodefaultroute plugin winbind.so ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1" Any help is GREATLY appreciated. I can give you any more info you need to know, and it's a new test server, so I can perform any tests/reboots required to get it up and going. Thanks a ton.

  Read the article

• ruby on rails gitorious setup on ubuntu

  - by dogmatic69

  Ive been trying to install gitorious for a while now which required ruby and rails etc. Ive finally got rails pages serving but cant finish the installation of gitorious because the gem version is too new. the error logs say please run 'rake ultrasphinx:configure' and that gives rake ultrasphinx:configure (in /var/www/apps/gitorious) rake aborted! uninitialized constant ActiveSupport::Dependencies::Mutex /var/www/apps/gitorious/Rakefile:10:in `require' (See full trace by running task with --trace) From searching google this is beacuse of the wrong gem verison. Cant find a way to down grade it. apparently sudo gem update --system 1.4.2 should do the trick but ubuntu 10.10 does not like this. ERROR: While executing gem ... (RuntimeError) gem update --system is disabled on Debian, because it will overwrite the content of the rubygems Debian package, and might break your Debian system in subtle ways. The Debian-supported way to update rubygems is through apt-get, using Debian official repositories. If you really know what you are doing, you can still update rubygems by setting the REALLY_GEM_UPDATE_SYSTEM environment variable, but please remember that this is completely unsupported by Debian. So i added export REALLY_GEM_UPDATE_SYSTEM=1 to .bashrc and reloaded it with . ~/.bashrc and still the same. ive tried various forms of setting this environmental variable with no luck. Ive also been told on #gitorious irc channel to add the file config/initializers/rubygems.rb with the line require "thread" to it. This has done nothing. EDIT: Just found another way which was rvm install rubygems 1.4.2 and it gave: Removing old Rubygems files... Installing rubygems dedicated to ruby-1.8.7-p334... Retrieving rubygems-1.4.2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 288k 100 288k 0 0 282k 0 0:00:01 0:00:01 --:--:-- 414k Extracting rubygems-1.4.2 ... Installing rubygems for /home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby ERROR: Error running 'GEM_PATH="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global" GEM_HOME="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334" "/home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby" "/home/ubuntu/.rvm/src/rubygems-1.4.2/setup.rb"', please read /home/ubuntu/.rvm/log/ruby-1.8.7-p334/rubygems.install.log WARN: Installation of rubygems did not complete successfully. TL;DR please tell me how to downgrade rubygems on ubuntu 10.10 or upgrade gitorious to work with 1.6.2 gems

  Read the article

• Email arrived in SPAM no matter I do SPF, DKIM, and others stuffs

  - by Xjet

  During a full day I tried to removed my email from SPAM (in google). So I start from scratch by instaling Postfix on debian, setup SPF and DKIM. Email stay in spam but header are here. So I continue to set up DMARC. So far so good. Here is my last header : Delivered-To: h********[email protected] Received: by 10.224.84.20 with SMTP id h20csp148174qal; Tue, 3 Jun 2014 01:16:22 -0700 (PDT) X-Received: by 10.112.148.165 with SMTP id tt5mr6432900lbb.61.1401783381908; Tue, 03 Jun 2014 01:16:21 -0700 (PDT) Return-Path: <[email protected]> Received: from bcp.monconcours.com ([188.226.227.141]) by mx.google.com with ESMTP id ue3si38630125lbb.3.2014.06.03.01.16.21 for <h********[email protected]>; Tue, 03 Jun 2014 01:16:21 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 188.226.227.141 as permitted sender) client-ip=188.226.227.141; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 188.226.227.141 as permitted sender) [email protected]; dkim=pass [email protected]; dmarc=pass (p=NONE dis=NONE) header.from=bcp.monconcours.com Received: by bcp.monconcours.com (Postfix, from userid 33) id 9EA90614F2; Tue, 3 Jun 2014 08:16:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=monconcours.com; s=mail; t=1401783380; bh=IHAmfgk+Ge5iunMmbPMRKPHJrHsCmMebmJkS/G3zk7w=; h=To:Subject:From:To:Reply-To:Date; b=w/cIlRwSFhNS0TIKJj6yd2R3PeKDkkSf/ht2x4FV4l1jOlgsEwsXN8m4aJQMO0uCA hG4AOUgIGAlCoP5qrgLGtRYgjVbKXmHY0cjMxUvbVDKI0xymzSxzuPqoIXWD3COe+v +W57zmEFcq93pJvDUivJzgIWbYFy6SRWe495ups0= To: h*****[email protected] Subject: Creads.fr vous remercie de votre visite, Buissness Angel pour 3 million X-PHP-Originating-Script: 0:testmail.php From: "Banque BCP - Concours photo #teamportugal" <[email protected]> To: hu*****[email protected] Reply-To: "Banque BCP - Concours photo #teamportugal" <[email protected]> MIME-Version: 1.0 Content-Type: multipart/alternative;boundary=np538d84549a709 Content-Transfer-Encoding: 8bit Organization: Creads Digital X-Priority: 3 X-Mailer: PHP5.4.4-14+deb7u9 Message-Id: <[email protected]> Date: Tue, 3 Jun 2014 08:16:20 +0000 (UTC) This is a MIME encoded message. --np538d84549a709 Content-type: text/plain;charset=utf- I've also noticed a warn log for opendmarc : warning: connect to Milter service inet:127.0.0.1:8893: Connection refused But it seems that DMARC pass anyway... I've setup the correct DNS for DKIM and SPF, domain name or ip is not blacklisted. I've test on http://www.mail-tester.com/web-rMZjFj&reloaded=12 Most things seems ok but I can't fix the Reverse DNS issue (I don't have access to the main server). I begin to be pretty annoyed by the problem that's why I need expert advice/help.

  Read the article

• Can't get virtual desktops to show up on RDWeb for Server 2012 R2

  - by Scott Chamberlain

  I built a test lab using the Windows Server 2012 R2 Preview. The initial test lab has the following configuration (I have replaced our name with "OurCompanyName" because I would like it if Google searches for our name did not cause people to come to this site, please do the same in any responses) Physical hardware running Windows Server 2012 R2 Preview full GUI, acting as Hyper-V host (joined to the test domain as testVwHost.testVw.OurCompanyName.com) with the following VM's running on it VM running 2012 R2 Core acting as domain controller for the forest testVw.OurCompanyName.com (testDC.testVw.OurCompanyName.com) VM running 2012 R2 Core with nothing running on it joined to the test domain as testIIS.testVw.OurCompanyName.com A clean install of Windows 7, all that was done to it was all windows updates where loaded and sysprep /generalize /oobe /shutdown /mode:vm was run on it A clean install of Windows 8, all that was done to it was all windows updates where loaded and sysprep /generalize /oobe /shutdown /mode:vm was run on it I then ran "Add Roles and Features" from testVwHost and chose the "Remote Desktop Services Installation", "Standard Deployment", "Virtual machine-based desktop deployment". I choose testIIS for the roles "RD Connection Broker" and "RD Web Access" and testVwHost as "RD Virtualization Host" The Install of the roles went fine, I then went to Remote Desktop Services in server manager and wet to setup Deployment Properties. I set the certificate for all 3 roles to our certificate signed by a CA for *.OurCompanyName.com. I then created a new Virtual Desktop Collection for Windows 7 and Windows 8 and both where created without issue. On the Windows 7 pool I added RemoteApp to launch WordPad, For windows 8 I did not add any RemoteApp programs. Everything now appears to be fine from a setup perspective however if I go to https://testIIS.testVw.OurCompanyName.com/RDWeb and log in as the use Administrator (or any orher user) I don't see the virtual desktops I created nor the RemoteApp publishing of WordPad. I tried adding a licensing server, using testDC as the server but that made no difference. What step did I miss in setting this up that is causing this not to show up on RDWeb? If any additional information is needed pleas let me know. I have tried every possible thing I can think of and I am just groping around in the dark now. The virtual machines running on testVwHost The configuration screen for RD Services The Windows 7 Pool The Windows 8 Pool This is logged in as testVw\Administrator

  Read the article

< Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >