Search Results

Search found 15280 results on 612 pages for 'encrypted home'.

Page 521/612 | < Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >

  • Hadoop initscript askes password

    - by Ramesh
    I have installed hadoop on my ubuntu 12.04 single node .I am trying to execute an init script to make the hadoop run on start up but it asks password every time i execute. #!/bin/sh ### BEGIN INIT INFO # Provides: hadoop services # Required-Start: $network # Required-Stop: $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Description: Hadoop services # Short-Description: Enable Hadoop services including hdfs ### END INIT INFO PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin HADOOP_BIN=/home/naveen/softwares/hadoop-1.0.3/bin NAME=hadoop DESC=hadoop USER=naveen ROTATE_SUFFIX= test -x $HADOOP_BIN || exit 0 RETVAL=0 set -e cd / start_hadoop () { set +e su $USER -s /bin/sh -c $HADOOP_BIN/start-all.sh > /var/log/hadoop/startup_log case "$?" in 0) echo SUCCESS RETVAL=0 ;; 1) echo TIMEOUT - check /var/log/hadoop/startup_log RETVAL=1 ;; *) echo FAILED - check /var/log/hadoop/startup_log RETVAL=1 ;; esac set -e } stop_hadoop () { set +e if [ $RETVAL = 0 ] ; then su $USER -s /bin/sh -c $HADOOP_BIN/stop-all.sh > /var/log/hadoop/shutdown_log RETVAL=$? if [ $RETVAL != 0 ] ; then echo FAILED - check /var/log/hadoop/shutdown_log fi else echo No nodes running RETVAL=0 fi set -e } restart_hadoop() { stop_hadoop start_hadoop } case "$1" in start) echo -n "Starting $DESC: " start_hadoop echo "$NAME." ;; stop) echo -n "Stopping $DESC: " stop_hadoop echo "$NAME." ;; force-reload|restart) echo -n "Restarting $DESC: " restart_hadoop echo "$NAME." ;; *) echo "Usage: $0 {start|stop|restart|force-reload}" >&2 RETVAL=1 ;; esac exit $RETVAL Please tell me how to run hadoop without entering password.

    Read the article

  • Debian Server wont reboot from script

    - by Littlejon
    I have a script that is run to backup a server via Rsync, after that script is run I want the server to reboot. My script is run as root from the Crontab at 3am in the morning. #!/bin/bash HOST="email" RSYNC_OPTS="-a -v -v --progress --stats --delete" RSYNC_DEST="10.0.0.10::$HOST" BACKUP_LIST="/etc /home /root" TIMESTAMP="/timestamp-bkup-start.chk" TIMESTAMP2="/timestamp-bkup-stop.chk" touch $TIMESTAMP rsync $RSYNC_OPTS $TIMESTAMP $RSYNC_DEST for BACKUP_ITEM in $BACKUP_LIST; do rsync $RSYNC_OPTS $BACKUP_ITEM $RSYNC_DEST done /etc/init.d/zimbra stop sleep 60s rsync $RSYNC_OPTS /opt $RSYNC_DEST touch $TIMESTAMP2 rsync $RSYNC_OPTS $TIMESTAMP2 $RSYNC_DEST echo `date +%Y%m%d%H%M` >> /var/log/reset reboot # $# shows number of args passed # $1 to access first variable #if [ $# -eq 1 ]; then # if [ $1 = "withreboot" ]; then # echo "rebooting..."; # echo `date +%Y%m%d%H%M` >> /var/log/reset # /sbin/reboot # fi #fi I have tried using init 6 rather then reboot. I have tried /sbin/reboot. I also have another basic script that just echos to the reset log and runs reboot without issue. It is just with the script above the server wont restart. If anyone has any theories that would be great as I have run out of idea. Thanks, Jon

    Read the article

  • LAMP Setup, PHP's session_start permission denied

    - by Andrew
    I'm trying to set up a development environment for a legacy system that runs CentOS 4.8, PHP 4.3.9, and MySQL 4.1.22. I'm matching OS and software versions to keep the development server as close to the production server as possible. When I fire up PHPMyAdmin's setup script (version 2.11.10.1, of course) the installation errors out and I see these errors in my error log: [client 172.18.141.74] PHP Warning: session_start(): open(/var/lib/php/session/sess_b5b90f86bd3dcfad315ff24cb7483a79, O_RDWR) failed: Permission denied (13) in /home/www/intranet/phpmyadmin/libraries/session.inc.php on line 87 [client 172.18.141.74] PHP Warning: Unknown(): open(/var/lib/php/session/sess_b5b90f86bd3dcfad315ff24cb7483a79, O_RDWR) failed: Permission denied (13) in Unknown on line 0 [client 172.18.141.74] PHP Warning: Unknown(): Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/lib/php/session) in Unknown on line 0 I've done some searching on ServerFault and on teh Googles and I see that a common reason for this error is that the session.save_path isn't writable by the www user. I also found where in /etc/php.ini this URL is set: session.save_path. My session.save_path is set to: session.save_path = /var/lib/php/session I've since changed the owner and the group of /var/lib/php/session and still have the same error. Here's the result of ls -la for /var/lib/php [root@localhost php]# ls -la total 24 drwxrwxr-x 3 www www 4096 Oct 23 20:21 . drwxr-xr-x 17 root root 4096 Oct 23 20:31 .. drwxrwx--- 2 www www 4096 Jun 1 2009 session ...But I'm still getting the same error. Is there another possibility for why I'm getting this error?

    Read the article

  • How to set umask globally?

    - by DevSolar
    I am using a private user group setup, i.e. a user foo's home directory is owned by foo:foo, not foo:users. For this to work, I need to set the umask to 002 globally. After a quick grep -RIi umask /etc/*, it seemed for a moment that modifying the UMASK entry in /etc/login.defs should do the trick. It does, too -- but only for console logins. If I log in to my desktop, and open a terminal there, I still get to see the default umask 022. Same goes for files created from apps started through the menu. Apparently, the display manager (or whatever X11 component responsible) does source some different setting than a console login does, and damned if I could tell which one it is. (I tried changing the setting in /etc/init.d/rc, and no, it did not help.) How / where do I set umask globally (and for all users), so that the X11 desktop environment gets the memo as well? (The system is Linux Mint / Ubuntu, in case that changes anything...)

    Read the article

  • Mail not piping in postfix

    - by user220912
    I have setup a postfix server and wanted to test the piping of mail to my perl script where i can make use of it and filter the mails.I wrote a test script for that which just logs the information in txt file. but i don't see any changes on sending the mail. My postconf-n output: alias_database = hash:/etc/aliases append_dot_mydomain = no command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = yantratech.co.in, localhost.localdomain, localhost myhostname = tcmailer8.in mynetworks = 103.8.128.62, 103.8.128.69/101, 168.100.189.0/28, 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES recipient_delimiter = + relayhost = sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/pki/tls/certs/tcmailer8.in.cert smtpd_tls_key_file = /etc/pki/tls/private/localhost.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes transport_maps = hash:/etc/postfix/transport virtual_alias_maps = hash:/etc/postfix/virtual virtual_gid_maps = static:5000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = /etc/postfix/vhosts virtual_mailbox_maps = hash:/etc/postfix/vmaps virtual_minimum_uid = 1000 virtual_uid_maps = static:5000 here's my transport: [email protected] email_route my main.cf declaration: transport_maps = hash:/etc/postfix/transport my master.cf declaration: email_route unix - n n - - pipe flags=FR user=nobody argv=/etc/postfix/test.php -f $(sender) -- $(recipient) and my php script: #!/usr/bin/php <?php $fh = fopen('/etc/postfix/testmail.txt','a'); fwrite($fh, "Hello it works\n"); fclose($fh); ?> I am sending mails through telnet in localhost.

    Read the article

  • How to stop NAT dropping idle connections?

    - by WGH
    I have a TCP connection that can be idle for many hours. The traffic is flowing from the server to the client only. One might say it's kind of push notification. My home router, however, tends to drop the connection silently after 20 minutes (the value of /proc/sys/net/netfilter/nf_conntrack_tcp_timeout_established). The server detects the loss once it tries to send anything (I assume it receives RST from the router itself). As client never sends anything, it never detects the loss. RFC 5382 "NAT Behavioral Requirements for TCP" states the following: A NAT can check if an endpoint for a session has crashed by sending a TCP keep-alive packet and receiving a TCP RST packet in response. It makes sense. It's much more effective than sending keep-alives by the host itself (as only NAT knows its own timeout). And probably not hard to implement. Is there any NAT solutions implementing this? It would be great if there was a way to enable this in iptables.

    Read the article

  • How can I restore my laptop from Windows 7 to its original Windows Vista recovery partition?

    - by Cam Jackson
    I bought my Acer laptop 4 years ago with Vista Home Premium x86. It has a recovery partition that I have used successfully in the past to format everything and reinstall Windows to factory settings. I have since upgraded to Windows 7, but I now need to get back to my original installation. Not sure what it's called, but I can successfully get into this recovery thingy: However, when I click the third option (for me I think it says 'Windows Image Recovery' or something like that) it tells me that it can't find any images to recover from :( I have checked and I don't have a windows.old that I can recover from either. One final note, if I launch diskmgmt.msc, these are the partitions: Why is the first partition shaded? Does that mean anything? Both of the 'unlettered' partitions are 100% empty. Did the Windows 7 upgrade process format my Vista system recovery partition?! And finally: How can I get back to my factory settings? EDIT: I did see this question, but neither of the answers apply to my situation. Edit to address jdh's answer: From what I can tell, I never get the option to boot the Vista recovery partition. After hitting F10, I get this screen, except it's partition 2, and I don't have the IN/MINT bit: I hit Escape, and then I get this screen, except without Ubuntu listed, and without the auto-countdown thing: I hit F8, and then I get this screen: I hit Enter on the first option, I end up at the screen in the first screen shot. As I said, from there I click the third option, and it fails to find the image, which I guess makes sense if it's only looking for a Windows 7 recovery. So I either need to make the Windows 7 tool see the Vista recovery partition, or I need the boot loader (?) to let me select Vista earlier in the process. Any ideas?

    Read the article

  • Recover data from Dynamic Disk (MBR) bigger than 2TB

    - by Helder
    Here is the situation: Promise Array FastTrak TX4310 with 3 disks (750 GB each) in RAID5. This comes to around 1500 GB of data. Last week I had the idea of expanding the RAID with an additional 750 GB disk. This would bring the volume to around 2250 GB. I plugged the disk and used the Webpam software to do the RAID expansion. However, I didn't count with the MBR 2TB limit, as I didn't remembered that the disk was using MBR instead of GPT and I didn't check it prior to the expansion. After a couple of days of expansion, today when I got home, the disk in Windows disk manager showed the message "Invalid disk" and when I try to activate it, it says "The operation is not allowed on the Invalid pack". From what I figured, the logical volume on the RAID expanded, and passed that info to the Windows layer and I ended up with an "larger than 2TB" MBR disk. I'm hopping that somehow I can still recover some data from this, and I was wondering if I can "rewrite" the MBR structure back to the 1500 GB partition size, so I can access the partition in Windows. Right now I'm doing an "Analyse" with TestDisk, as I hope the program will pickup the old 1500 structure and allow me to somehow revert back to it. I think that even though the Logical Drive in the RAID is bigger than the 2TB, I can somehow correct the MBR to show the 1500 GB partition again. I had a similar problem once, and I was able to recover the data using a similar method. What do you guys think? Is it a dead end? Am I totally screwed because there is the extra RAID layer that I'm not counting? Or is there other way to move with this? Thanks all!

    Read the article

  • Routing for remote gateway over VPN in Vista/7 broken?

    - by Raymond
    Hi, Situation is as follows. Home computer running Windows 7, sets up VPN connection (LT2P + IPSec, "use remote gateway" disabled) to office. Subnet is 192.168.64.x Office has Draytek Vigor 2920 router, subnet is 192.168.32.x What happens? - VPN connection itself works fine - Can ping any machine on the remote network - When trying to open a webpage from a host in the remote network, the remote server logs the incoming request, but the browser hangs on "waiting for..." and eventually times out. I have observed this problem on Windows Vista and Windows 7. On Windows XP however there is no problem like described above. The only clue I have is that there is a difference in the routing between XP and Vista/7. The output of "route print" on Windows XP looks like this: (See www.latunyi.com/routing_xp.png) So here the gateway for the 192.168.32.x subnet is the IP address that the local computer has in the remote network. The output of "route print" on Windows 7 (and Windows Vista) looks like this: (See www.latunyi.com/routing_win7.png") Now the gateway for the 192.168.32.x subnet is the IP address of the VPN router (32.1). I don't know if that causes this trouble, but it seems a bit strange. Enabling "use default gateway on remote network" doesn't make a difference. Using the new option "Disable class based route addition" in Windows 7 only makes the route to the VPN router disappear. I am really puzzled here. I assume the VPN routing can't be broken in both Vista and Windows 7, and this should just work without manually adding routes. I hope someone has a solution for this problem :-). Thanks!

    Read the article

  • Ubuntu network card problem.

    - by Steve Greene
    Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

    Read the article

  • Internet Troubles - PPPoE vs PPPoA?

    - by AkkA
    I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

    Read the article

  • Connecting a laptop to a TV via HDMI

    - by Madmartigan
    I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

    Read the article

  • Using Samba to share a folder from a Linux guest with a Windows host in VirtualBox

    - by AmV
    I would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and I need more information on how to proceed. So far, I managed to set up two network adapters (one NAT and one host-only) and install Samba on the Linux guest, but now I have the following questions: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that need to be executed on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this? Thanks!

    Read the article

  • Wordpress Forbidden page

    - by ffffff
    HTML without a body part is null If I read preview mode in (there is no authority) without logging in The response html is this.. <html xmlns="http://www.w3.org/1999/xhtml" lang="ja" xml:lang="ja"> <head profile="http://purl.org/net/ns/metaprof"> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <meta http-equiv="Content-Script-Type" content="text/javascript" /> <meta name="generator" content="WordPress 2.9.2" /> <meta name="author" content="blog" /> <link rel="alternate" type="application/atom+xml" href="http://blog.example.com/feed/atom/" title="Atom cite contents" /> <link rel="start" href="http://blog.example.com" title="blog Home" /> <link rel="stylesheet" type="text/css" href="http://blog.example.com/wp-content/themes/blog/style.css" /> <meta name="description" content="blog" /> <title>blog - </title> </head> <body class="individual single"> </div> </body> </html> Do you have any solutions?

    Read the article

  • Defining Virtual and Real User Directories with Dovecot & Postfix

    - by blankabout
    Following a wobble described in this question we now have virtual and real users authenticating with Dovecot, the problem now is that the real users (who have been on the system for years) can no longer access their mail. I'm guessing that it is because Dovecot is configured to point to the virtual mailboxes but not the real mail boxes. These are snippets from the config files: /etc/dovecot/dovecot.conf !include conf.d/*.conf /etc/dovecot/conf.d/10-auth.cong passdb { driver = passwd-file # Path for passwd-file. Also set the default password scheme. args = scheme=cram-md5 /etc/cram-md5.pwd } userdb { driver=static #args = mail_uid=dovecot mail_gid=dovecot /etc/dovecot/userdb args = uid=vmail gid=vmail home=/var/spool/vhosts/%d/%n /etc/dovecot/userdb } [email protected]:::::/var/spool/vhosts/virtualdomain.com/:/bin/false:: We think the problem is that the Dovecot file 10-auth.conf does not contain a method of accessing the mailboxes for the real users. We have looked around on this site, dovecot.org and done the usual googling but cannot find anywhere that describes how to set up virtual users on alongside legacy real users. Any help would be appreciated, especially by our real users who would like the contents of their inboxes to be available! If any further config is required, please let me know.

    Read the article

  • Issue with exim4u

    - by bretterer
    I am using exim4u for a mail server on debian. Everything has been working fine until recently. I have not done anything to the server from the time it was working until now. I have a domain set up and is receiving and sending mail correctly. When i put a forwarding address in to a gmail address, I can still receive and send email from my webmail client but it never makes it to gmail. I have check logs and this is what I have found 2012-04-01 18:47:04 1SEPns-0000aN-Br DKIM: d=gmail.com s=20120113 c=relaxed/relaxed a=rsa-sha256 [verification succeeded] 2012-04-01 18:47:10 1SEPns-0000aN-Br H=mail-bk0-f43.google.com [209.85.214.43] Warning: X-Spam_score: -0.3 2012-04-01 18:47:10 1SEPns-0000aN-Br <= [email protected] H=mail-bk0-f43.google.com [209.85.214.43] P=esmtps X=TLS1.0:RSA_ARCFOUR_MD5:16 S=3424 id=CAGZkSKbYc7SJR+yXTgG8ubQvx4PNb0CwHG1DDKGeZ-qFiA$ 2012-04-01 18:47:11 1SEPns-0000aN-Br => /home/mail/mydomain.com/support/Maildir ([email protected]) <[email protected]> R=virtual_domains T=virtual_delivery 2012-04-01 18:47:12 1SEPns-0000aN-Br => [email protected] <[email protected]> R=dnslookup T=remote_smtp H=gmail-smtp-in.l.google.com [209.85.225.27] X=TLS1.0:RSA_ARCFOUR_SHA1:16 2012-04-01 18:47:12 1SEPns-0000aN-Br Completed I am not a mail server person so im not sure what everything here is saying. It appears to me that it is successfully sending mail to gmail though. I have checked my spam folder as well and nothing there either. If it would help to have some more information from my server, let me know because Im not sure what would be of help here.

    Read the article

  • What games work well on MacBook Pro (i7/GeForce GT 330M) within VMWare Fusion?

    - by webworm
    I have a 15" MacBook Pro (2.66 i7 with 8 GB RAM) with the GeForce GT 330M 512 MB graphics card. I use it primarily for development (Mac/Web/Windows) though I would like to play the occasional game with my son who uses a desktop PC system at home. I prefer to use VMWare Fusion for virtualization rather than BootCamp for a number of reasons. Heat/Fan issues with i7 under BootCamp Prefer to retain virtual machine as single file rather than dedicated partition (easier to move a nd backup) I have heard that Windows support of the GeForce GT 330 in BootCamp is not all that good. So that being said I was wondering what sort of games I would be able to play within the Fusion environment running Windows 7. I have 8 GB RAM and usually dedicate 4 GB to the virtual machine. I don't expect to be able to play the latest FPS games such as BattleField: Bad Company 2 or Call of Duty, rather I am looking at games such a Total War II, Civilizations IV, Supreme Commander, and other RTS type games. I should mention the native screen resolution of my MacBook Pro is 1680x1050, which is what I would be most likely running the VM at (fullscreen). Thank you for any advice.

    Read the article

  • HTTP cache for my virtual machines

    - by MathematicalOrchid
    I have several Linux virtual machines running on my home PC. One of the quirks of Linux is that every time you run a package manager, it wants to "refresh" the configured software repositories - which basically means it wants to download a file from the Internet. If I revert to an earlier snapshot of the VM, then next time I run the package manager it will re-download the exact same data again [since it no longer exists in the VM]. It seems a shame to waste bandwidth endlessly downloading the same data over and over again, so I was wondering if there's some way I can set up some kind of HTTP proxy server that caches downloaded files. I have no idea how you would do such a thing though. In particular, it needs to be set up so that the VMs don't need to "know" that the cache is there; it needs to be transparent. But I don't know how to do that. Any suggestions on what software I'd need to use? It would be nice if I could run it under the Windows host OS, but running a small VM with a Linux guest is also possible...

    Read the article

  • Synchronize folders on different computers without cloud and without network just internet

    - by theimmortalbg
    I have two computers with windows 7, one in my home town and one in another town. So they are not in private network but I have internet on both. They have exactly the same file structure. I am searching for program that can keep the data equal. I know about dropbox or google drive but they are cloud and I don't want to use them. Also they are using folder that you should copy your data in it. There is another programs that are like a server, just put something and after that you can download it but I dont need them. I want just to point which folders to be synchronized and the program make the synchronization. The sync can be in real time if the two computers are powered, or after few time when they are powered. Or it can lock another computer synced folder till update is required. At all this is my documents that I want to be synced in all my computers and to be changed from where I want. In fact I can move the updates with flash but if some program save the changes and make them on another computer with one click it will facilitate my work.

    Read the article

  • Things to check for an internet-facing email server.

    - by Shtééf
    I'm faced with the task of setting up a public-internet-facing email server, that will be relaying mail for all of our other servers in the network. While the software in itself is set up in few keystrokes, what little experience I have with managing an email server has thought me that there are tons of awkward filtering techniques employed by other email systems. Systems that my own server will inevitably interact with a some point. Hence, my questions: What things should be kept in mind and double checked when setting up an email server? What resources are available for checking if my email server is set-up correctly? I'm specifically NOT looking for instructions for any given mail server, such as Exchange or Postfix. But it's okay to say: “you should have X and Y in your set-up, because when talking to server software Z, it typically tries to weed out open relays by checking for these.” Some things I've discovered myself: Make sure forward and reverse DNS are set up. Mail servers tend to do a reverse lookup for the peer IP-address when receiving. Matching a reverse look up with a follow-up forward lookup is probably employed to weed out open relays run through malware on home networks. Make sure the user in the From-address exists. The From-address is easily spoofed. A receiving mail server may try to contact the mail server in the From-domain, and see if the From-user actually exists.

    Read the article

  • DD-WRT Acces Point as a Router

    - by Dzh
    Following suggestion to this question asked on Network Engineering, I am asking the question here. this is an extension to my previous question (I think it was deleted), where I was claiming that DDWRT was disabling it's DHCP server once connected to the network. I was wrong, as it now seems that it is bridging itself with another parallel connected wireless router. I have two Draytek 2820 and one Netgear WG602v3 with latest DDWRT. Lets call one wired-Draytek and it has wireless disabled. The other one, let's call it wireless-Draytek, is connected to wired-Draytek and has wireless with MAC filtering enabled. Once I connect Netgear to the wired-Draytek, the client that connects to Netgear, will be assigned with IP address from the wireless-Draytek. If the MAC address is not on the wireles-Draytek, the client is unable to obtain IP address and has no connectivity at all, even with manually assigned static IP configuration. To illustrate further, this is how network is set up: wired-Draytek ---------- wireless-Draytek \_________ Netgear What I wish to have, is that Netgear issues IP addresses from it's own IP pool and ignores the MAC filtering rules from wireless-Draytek. This is kind of puzzling how this they are bridging (if they are) themselves automatically. Thanks. UPDATE: It's not a home network. I gave you a bit simplified set-up. If there is a better site on Stack Exchange to ask this, please let me know. The Drayteks are running stock firmware, it's only Netgear that I've flashed to get more stability. In addition to these routers, I have also three 3COM Baseline switch 2824, and another Draytek router with Prosafe FS752TP PoE switch dedicated for VoIP phones. Wired-Draytek has IP 10.0.0.1, DHCP disabled as there is AD DC which is issuing IP addresses. Wireless-Draytek has IP 1.1.1.1 and DHCP enabled. Netgear has default - 192.168.1.1. As per suggestion, the specific question is - how do I isolate these two wireless routers?

    Read the article

  • Growing a Linux software RAID5 array

    - by chrismetcalf
    On my home file server, I've got a 1.5TB software RAID5 array, built from four 500gb Western Digital drives. I've got a fifth drive that I usually run as a hot spare (but have out of the array at the moment), but if I can I'd like to add that to the array and grow it to 2TB since I'm running out of space. I Googled for guidance, but there seem to be a lot of differing opinions out there (many of them probably now out-of-date) as to whether or not that is possible and/or smart. What's the right way to go about this, or should I start looking into building a new array with more space? Version details: %> cat /etc/issue Debian GNU/Linux 5.0 \n \l %> uname -a Linux magrathea 2.6.26-1-686-bigmem #1 SMP Sat Jan 10 19:13:22 UTC 2009 i686 GNU/Linux %> /sbin/mdadm --version mdadm - v2.6.7.2 - 14th November 2008 %> cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] md1 : active raid1 hdc1[0] hdd1[1] 293033536 blocks [2/2] [UU] md0 : active raid5 sde1[3] sda1[0] sdc1[2] sdb1[1] 1465151808 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]

    Read the article

  • Creating security permissions for a non-domain-member user in Windows Server 2008

    - by Overhed
    Hello everyone, I apologize in advance for incorrect use of terminology, as I'm not an IT person by trade. I'm doing some remote work via a VPN for a client and I need to add some DCOM Service security permissions for my remote user. Even though I'm on the VPN, the request for access to the DCOM service is using my PCs native user (and since I'm running Vista Home Premium it looks something like: PC-NAME\Username). The request for access comes back with access denied and I can not add this user to the security permissions as it "is not from a domain listed in the Select Location dialog box, and is therefore not valid". I'm pretty stuck and have no clue what kind of steps I need to do here. Any help would be appreciated, thanks in advance. EDIT: I have no control over what credentials are being passed in to the server by my computer. This scenario is occurring in an installation wizard that has a section which requests you point it to the machine running the "server" version of the software I'm installing (it then tries to invoke the relevant COM service, but my user does not have "Remove Activation Permissions" on that service, so I get request denied).

    Read the article

  • BSOD error 0x0000006B PROCESS1_INITIALIZATION_FAILED on boot

    - by DontCare4Free
    I reinstalled League of Legends because the patcher always gave me an error. However, out of complete stupidness I didn't uninstall the old installation first because I thought that it would simply replace the files. However, when the installer bar got to 100% it simply minimized. Then I closed the application from the task manager. I tried uninstalling it after a failed attempt to start it up. The same behavior as when I installed it. Then I tried reinstalling where it simply presented the InstallShield Modify/Repair/Remove menu and I selected repair. Nothing happened. Then I tried selecting Modify, then seeing that the only option (called DefaultFeature) was unchecked. Same behaviour as install/uninstall. After seeing that it still failed, I uninstalled again. And after that I deleted C:\Program Files (x86)\League of Legends manually. When I tried installing LoL again it still thought I had it, so I chose repair. This time something actually happened, but it installed the whole game to C:\Windows. Seeing what was going on I clicked cancel and then started it up to try uninstalling it. However, I got an error message about something not being registered and then the minimization to I decided to let it repair completely. Then I uninstalled it and it gave only the minimization. However, when I rebooted another application started up complaining about some library being absent. So I decided to do a system restore. After letting it complete I got a BSOD every time I tried starting up Windows normally or in safe mode. However, system recovery mode works, although the system recovery automatic repair does not fix it. After a bit of searching I found a Microsoft KB article about it (981833) and tried following the workaround instructions. Nothing happened. I am using Windows 7 Home Premium 64-bit and Ubuntu 10.04 LTS 64-bit installed with WUBI.

    Read the article

  • Access server using IP on another interface

    - by Markos
    I am using Windows Server 2012 instead of a router for my home network. Currently I am using RRAS and computers from local network can access Internet correctly. Here is a map of the current setup: [PC1] ---| |---- (lan ip)[Server](wan ip)--> internet [PC2] ---| I have applications running on Server, such as IIS and others. All can be accessed from internet using wan ip and from lan using lan ip. I have a domain, lets say its my-domain.com, which is resolved to my wan ip. What I want is to enable my LAN computers to be able to connect to services on my server using the very same address as internet users: eg http://my-domain.com/. However this does not work for my lan computers. What I understand is that I need to set up some kind of loopback route in a way that packets comming to LAN interface get routed to WAN interface. But I haven't found how to achieve this (in fact, I don't know WHAT to search for). Feel free to ask for additional informations and I will try to update the question.

    Read the article

< Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >