Search Results

Search found 57907 results on 2317 pages for 'database access'.

Page 522/2317 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

• Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem

  - by zchads

  Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem. Hardware Information: Buffalo Wireless Router/access point, Model: WZR-HP-G300NH-AP DSL Modem: Generic (actually not sure of manufacture). Service Provider: TOT (Thailand) Laptop-1: Windows XP and Belkin PCMIA Network Card Laptop-2: Windows XP unknown network card & Wifi Laptop-3: Windows 7 unknown network card & Wifi Outline of Problem/actions taken: After a recent power failure the router and laptop-1 connected to router were no longer able to access the internet. Actions taken to try and recover internet access: Using Laptop-1 tried to configure Router with PPPoe settings using software from Router Manufacture. During the installation process a Timeout error was experienced, unable to connect to WAN. Used Internet Explorer to communicate directly with Router using IP address. Changed settings to use PPPoe settings given by ISP. Router was not able to communicate with Internet. Repeated steps 1-4 again with no success. Reset Router and DSL modem. Repeated steps 1-4 again still no success. Tried connecting Laptop-1 directly to DSL to gain access to internet to research problem. No Network connection with DSL could be established…connection would be established for a second and then be lost and didn’t appear long enough to actually connect to DSL. Replugged LAN back into Router and connection was regained with laptop-1. Replugged Laptop-1 directly into DSL and again unable to establish network connection. Uninstalled network card and all of its drivers on Laptop-1. Reinstalled network card and drivers and tried connecting directly to DSL. Still unable to make network connection. Plugged DSL into Laptop-3 and Internet connection was established. Being Laptop-3 does not have a CD-Rom, Laptop-2 was tried to connect to the router. With Laptop-2 steps 1-7 ended up being repeated without success. Tried plugging Laptop-2 directly into DSL and again no network connection could be established. Using Laptop-3 with a direct connection to DSL downloaded latest Router FW. Installed router FW using Laptop-1. Tired the installation process again without success. Being desperate reinstalled OS on Laptop-1 still not success. Tried using “ipconfig” with router to see what was going on without success. With laptop-1 connected to DSL went through the “ipconfig /…” inputs to see if anything made a difference. Being the network card was not able to make a connection this provide very little information “media disconnected”. So now I have a router and two laptops which are unable to connect to the internet and sure could use some advice/help.

  Read the article

• Is there a way to prevent Maven Test from rebuilding the database?

  - by Christopher W. Allen-Poole

  I've recently been asked to, effectively, sell my department on unit testing. I can't tell you how excited this makes me, but I do have one concern. We're using JUnit with Spring and Maven, and this means that each time mvn test is called, it rebuilds the database. Obviously, we can't integrate that with our production server -- it would kill valuable data. How do I prevent the rebuilding without telling maven to skip testing? The best I could figure was to assign the script to operate in a test database (line breaks added for readability): mvn test -Ddbunit.schema=<database>test -Djdbc.url=jdbc:mysql://localhost/<database>test? createDatabaseIfNotExist=true&amp; useUnicode=true&amp;characterEncoding=utf-8 I can't help but think there must be a better way. I'm especially interested in learning if there is an easy way to tell Maven to only run tests on particular classes without building anything else? mvn -Dtest=<test-name> test still rebuilds the database. ======= update ======= Bit of egg on my face here. I didn't realize that I was using the same variable in two places, meaning that the POM was using a "skip.test" variable for both rebuilding the database and for running the tests...

  Read the article

• Is ADO.NET Entity framework database schema update possible ?

  - by fyasar

  Hi All I'm working on proof of concept application like crm and i need your some advice. My application's data layer completely dynamic and run onto EF 3.5. When the user update the entity, change relation or add new column to the database, first i'm planning make for these with custom classes. After I rebuild my database model layer with new changes during the application runtime. And my model layer tie with tightly coupled to my project for easy reflecting model layer changes (It connected to my project via interfaces and loading onto to application domain in the runtime). I need to create dynamic entities, create entity relations and modify them during the runtime after that i need to create change database script for updating database schema. I know ADO.NET team says "we will be able to provide this property in EF 4.0", but i don't need to wait for them. How can i update database changes during the runtime via EF 3.5 ? For example, i need to create new entity or need to change some entity schema, add new properties or change property types after than how can apply these changes on the physical database schema ? Any ideas ?

  Read the article

• Is ADO.NET Entity framework database schema update possible?

  - by fyasar

  I'm working on proof of concept application like crm and i need your some advice. My application's data layer completely dynamic and run onto EF 3.5. When the user update the entity, change relation or add new column to the database, first i'm planning make for these with custom classes. After I rebuild my database model layer with new changes during the application runtime. And my model layer tie with tightly coupled to my project for easy reflecting model layer changes (It connected to my project via interfaces and loading onto to application domain in the runtime). I need to create dynamic entities, create entity relations and modify them during the runtime after that i need to create change database script for updating database schema. I know ADO.NET team says "we will be able to provide this property in EF 4.0", but i don't need to wait for them. How can i update database changes during the runtime via EF 3.5 ? For example, i need to create new entity or need to change some entity schema, add new properties or change property types after than how can apply these changes on the physical database schema ? Any ideas ?

  Read the article

• How do i programmatically access the face cache in Windows Live Photo Gallery?

  - by acorderob

  I'm not talking about the "people tags" embeded in the XMP packets of JPEGs. I'm talking about the face database used to recognize new faces. I want to add to my program the option to recognize faces using the already trained database of WLPG. I managed to use the API (a type library dll) to detect faces, but to recognize them it needs an Exemplar Cache object that is not available in the same API. I could create my own object, but i want to use the already existing one to avoid duplicate training for the user. I know the database is in C:\Users\\AppData\Local\Microsoft\Windows Live Photo Gallery and that it is in an SQL Server Compact format. I tried to open the database with Visual Studio 2010, but it says that it is in an older version (pre-3.5) and needs to be upgraded. I don't want to change the database, just read it. I don't know how the WPLG reads it since apparently i don't have the correct OLEDB provider version. I would also prefer to read it without accesing the database directly but i don't see any DLL that exports that functionality. BTW, i'm using Delphi 2010. Any ideas?

  Read the article

• Zend Framework/PHPUnit: How to Stub/Mock an object method that connects to a database?

  - by Andrew

  In my Zend Framework project, I have a form that I am testing. In my form, a multi-select element gets its options from a model, which gets the data from the database. public function init() { $this->addElement('select', 'Region_ID', array('multiOptions' => $this->getRegions())); } protected function getRegions() { $mapper = new Model_RegionMapper(); return $mapper->getFormSelectData(); //this method will try to connect to a database (or get another object that will connect to the database) } I tried copying the example in the PHPUnit documentation, but it doesn't seem to be working. public function setUp() { $stub = $this->getMock('Model_RegionMapper'); $stub->expects($this->any()) ->method('getFormSelectData') ->will($this->returnValue(array('testdata'))); } public function testFoo() { //this will fail $form = new My_Form(); } The test fails because it is trying to find a table in the database that doesn't exist. But I don't want it to connect to the database at all. How do I correctly stub/mock this method so that it doesn't call the database?

  Read the article

• Why does an authorized OAuth request token need to be exchanged for an access token?

  - by Joe Shaw

  I'm wondering what the reasons are for OAuth to require a round-trip to the data provider to exchange an authorized request token for an access token. My understanding of the OAuth workflow is: Requesting site (consumer) gets a request token from the data provider site (service provider). Requesting site asks the data provider site to authenticate the user, passing in a callback. Once the user has been authenticated and authorized the requesting site, the user is directed back to the requesting site (consumer) via the callback provided which passes back the now-authorized request token and a verification code. The requesting site exchanges the request token for an access token. The requesting site uses the access token to get data from the data provider site. Assuming I got that right, why couldn't the callback simply provide the access token to the requesting site directly in step 3, eliminating step 4? Why is the request to exchange the request token for the access token necessary? Does it exist solely for consumers that require users to enter the verification code manually, with the thought that it would be shorter and simpler than the access token itself?

  Read the article

• How to view my Android app created database, via my android app?

  - by suufang

  I'm creating an application that collects users location (Cell broadcast location code) and saves that location with a name of users option, for example say my CB location code is 546034, now my app allows me to store that location code with a name of my choice say 'Home'. So, essentially my app has that following modules, To collect users CB location. To collect a custom name from user of that location. To store these values in a database. I've succeeded in doing all the above modules. I have a sub-module for my third module which has an option for user, of showing and deleting the database values, the screen shot looks as follows, Now, Users should be able to view and delete entries when he chooses the option 'View my database of locations' I've learned how to query my database values and I'm stuck with creating a list view and providing the delete option. My code for getting the database values and querying values goes as follows, submit.setOnClickListener(new View.OnClickListener() { public void onClick(View arg0) { String locname = name.getText().toString(); if(locname.length()==0) { Toast.makeText(getBaseContext(), "Please enter the location name, for example 'Home'.", Toast.LENGTH_LONG).show(); } else { SQLiteDatabase cd = openOrCreateDatabase("mydata", MODE_WORLD_READABLE, null); cd.execSQL("CREATE TABLE IF NOT EXISTS MLITable (CblocationCode INT(10), CblocationName VARCHAR);"); cd.execSQL("INSERT INTO MLITable VALUES ('"+str+ "','"+locname+ "');"); cd.close(); Toast.makeText(getBaseContext(), "value successfully entered.", Toast.LENGTH_LONG).show(); } } }); viewdb.setOnClickListener(new View.OnClickListener() { public void onClick(View arg0) { // here comes the code for viewing the database and deleting SQLiteDatabase db = openOrCreateDatabase("mydata", MODE_WORLD_READABLE, null); Cursor c = db.rawQuery("SELECT * FROM MLITble", null); db.close(); } }); I can see that I've read the table values, but I'm not able to create a display for those values. Help required. Thank you.

  Read the article

• Finding out the windows group by virtue of which a user is able to access a database in sql server?

  - by Raghu Dodda

  There is a SQL Server 2005 database with mixed-mode authentication. Among others, we have the following logins on the server: our-domain\developers-group-1, and our-domain\developers-group-2 which are AD groups. The our-domain\developer-group-2 is added to the sysadmin role on the server, by virture of which all domain users of that group can access any database as SQL Server implictly maps the sysadmin role to the dbo user in each database. There are two users our-domain\good-user and our-domain\bad-user The issue is the following: Both the good-user and the bad-user have the exact same AD group memberships. They are both members of our-domain\developers-group-1 and our-domain\developers-group-2. The good-user is able to access all the databases, and the bad-user is not. The bad-user is able to login, but he is unable access any databases. By the way, I am the good-user. How do I go about finding out why? Here's what I tried so far: When I do print current_user, I get dbo When I do print system_user, I get my-domain\good-user When I do select * from fn_my_permissions(NULL, 'SERVER'), I see permissions. But if do execute as user='my-domain\good-user'; select * from fn_my_permissions(NULL, 'SERVER'), I dont see any permisisons. And When I do, execute as user='my-domain\bad-user'; select * from fn_my_permissions(NULL, 'SERVER'), I dont see any permisisons. Also, I was wondering if there is a sql command that will tell me, "hey! the current database user is able to access this database because he is a member such-and-such ad-group, which is a login that is mapped to such-and-such user in this database".

  Read the article

• Looking for an email/report templating engine with database backend - for end-users ...

  - by RizwanK

  We have a number of customers that we have to send monthly invoices too. Right now, I'm managing a codebase that does SQL queries against our customer database and billing database and places that data into emails - and sends it. I grow weary of maintaining this every time we want to include a new promotion or change our customer service phone numbers. So, I'm looking for a replacement to move more of this into the hands of those requesting the changes. In my ideal world, I need : A WYSIWYG (man, does anyone even say that anymore?) email editor that generates templates based upon the output from a Database Query. The ability to drag and drop various fields from the database query into the email template. Display of sample email results with the database query. Web application, preferably not requiring IIS. Involve as little code as possible for the end-user, but allow basic functionality (i.e. arrays/for loops) Either comes with it's own email delivery engine, or writes output in a way that I can easily write a Python script to deliver the email. Support for generic Database Connectors. (I need MSSQL and MySQL) F/OSS So ... can anyone suggest a project like this, or some tools that'd be useful for rolling my own? (My current alternative idea is using something like ERB or Tenjin, having them write the code, but not having live-preview for the editor would suck...)

  Read the article

• Cisco ASA not forwarding traffic from one interface to another

  - by Antoine Benkemoun

  Hello ServerFault, I am needing help in the configuration process of my Cisco ASA 5510. I have set up 4 Cisco ASA interconnected together via a big LAN. Each Cisco ASA has 3 or 4 LANs attached to them. The IP routing part is taken care of by OSPF. My problem is on another level. A computer connected to one of the LANs attached to an ASA has no problem communicating with the outside world. The outside world being anything "after" the ASA. My problem is that I am completely unable to have them communicate with another LAN connected to the same ASA. To rephrase this, I am unable to send traffic from one interface of a given ASA to another interface of the same ASA. My configuration is the following : ! hostname Fuji ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 10.0.0.2 255.255.255.0 no shutdown ! interface Ethernet0/1 speed 100 duplex full nameif cs4 no shutdown security-level 100 ip address 10.1.4.1 255.255.255.0 ! interface Ethernet0/2 speed 100 duplex full no shutdown ! interface Ethernet0/2.15 vlan 15 nameif cs5 security-level 100 ip address 10.1.5.1 255.255.255.0 ! interface Ethernet0/2.16 vlan 16 nameif cs6 security-level 100 ip address 10.1.6.1 255.255.255.0 ! interface Management0/0 speed 100 duplex full nameif management security-level 100 ip address 10.6.0.252 255.255.255.0 ! access-list nat_cs4 extended permit ip 10.1.4.0 255.255.255.0 any access-list acl_cs4 extended permit ip 10.1.4.0 255.255.255.0 any access-list nat_cs5 extended permit ip 10.1.5.0 255.255.255.0 any access-list acl_cs5 extended permit ip 10.1.5.0 255.255.255.0 any access-list nat_cs6 extended permit ip 10.1.6.0 255.255.255.0 any access-list acl_cs6 extended permit ip 10.1.6.0 255.255.255.0 any ! access-list nat_outside extended permit ip any any access-list acl_outside extended permit ip any 10.1.4.0 255.255.255.0 access-list acl_outside extended permit ip any 10.1.5.0 255.255.255.0 access-list acl_outside extended permit ip any 10.1.6.0 255.255.255.0 ! nat (outside) 0 access-list nat_outside nat (cs4) 0 access-list nat_cs4 nat (cs5) 0 access-list nat_cs5 nat (cs6) 0 access-list nat_cs6 ! static (outside,cs4) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 static (outside,cs5) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 static (outside,cs6) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 ! static (cs4,outside) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 static (cs4,cs5) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 static (cs4,cs6) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 ! static (cs5,outside) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 static (cs5,cs4) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 static (cs5,cs6) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 ! static (cs6,outside) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 static (cs6,cs4) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 static (cs6,cs5) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 ! access-group acl_outside in interface outside access-group acl_cs4 in interface cs4 access-group acl_cs5 in interface cs5 access-group acl_cs6 in interface cs6 ! router ospf 1 network 10.0.0.0 255.255.255.0 area 1 network 10.1.4.0 255.255.255.0 area 1 network 10.1.5.0 255.255.255.0 area 1 network 10.1.6.0 255.255.255.0 area 1 log-adj-changes ! There is nothing really complicated in this configuration. It just NATs from one interface to another and that's it. I have tried enabling same-security-traffic permit inter-interface but that doesn't help. I therefore must be missing something a little bit more complicated. Does anyone know why I cannot foward traffic from one interface to another ? Thank you in advance for your help, Antoine

  Read the article

• How do I access the web server on my desktop from my laptop?

  - by Steven

  I'm running Apache on my stationary and I would like to access a website through my laptop. This is some of the Apache config: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerName mysite.com DocumentRoot I:/wamp/www/mysite/ </VirtualHost> ServerName localhost:80 <Directory /> Options FollowSymLinks AllowOverride all Order deny,allow Deny from all </Directory> On my laptop I've added the following to the HOSTS file: 10.0.0.3 mysite.com But accessing the page through mysite.com is not very successfull. If I enter the IP address directly, I only get a Forbidden message. What do I need to do in order to get this to work? Update I'm runing WAMPSERVER 2.1 (Apache 2.2.17) Apache is up and running I can ping 10.0.0.3 from laptop I'm not able to ping http://mysite.com from laptop IE gives me a 403 Forbidden - The website declined to show this webpage The only log that get's entries when trying to access the website from my laptop, is access.log. access.log 10.0.0.4 - - [13/Jun/2011:10:14:04 +0200] "GET / HTTP/1.1" 403 202 apache_error.log [Mon Jun 13 10:08:16 2011] [error] VirtualHost localhost:0 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results UPDATE 2 My apache config has the following entry: AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 Could it be that this Allow from is stopping other computers accessing the page?

  Read the article

• PHP scripts randomly becoming really slow to respond - Database lockup?

  - by webnoob

  Hi All, I wasn't sure whether to post this here or on stackoverflow, so apologies if its in the wrong place. I have about 7 php scripts running on a centOS VPS. Each of these scripts contacts a game server and processes the logs, with the logs it either does some database queries or sends info back to the game server. I am having an issue where some of the scripts will randomly become REALLY slow to respond and I don't know where to start with my debugging. Each script connects to its own database schema but on the same MySQL server. Each script will do about 4 inserts per second and twice as many select statements on their respective databases. I thought a database lockup may cause the issue but some console messages that are read from the database are sent to the game servers console without issue every 30 seconds, even when the script is slow to responding to other commands. Non of the scripts are using a lot of memory or CPU power. About 0.1% each. I know this information is really vague but I don't know linux very well at all (in fact, top is about my limit) and I really don't know where to start debugging this. Thanks.

  Read the article

• Unable to access my IIS website using hostname. Works fine with localhost

  - by rajugaadu

  I am unable to access my IIS website or even the default website. I did a bit of research and checked/selected the option 'Integrate Windows Authentication' in the Properties > Directory Service tab. From then on I could access the website using localhost. But when I use my hostname, it asks for domain username/password. Why is it so? I don't understand why am I not able to access my website without checking this option to integrate windows authentication? My goal is to access the website using both localhost and hostname. More details on what I did: I haven't done anything out of world. What I did is: IIS - Websites - Create new Website - Create a working folder - Set a default page. I restart this website and then click on browse. And I do not see my default page. I had to go to Directory Service tab and select the check box "Integrate Windows Authentication". Then I can see the default page coming. On IE too I can see the default page coming when I use http://localhost. But when I use http://{hostname} it asks for domain username and password. Why???

  Read the article

• How can I tell SELinux to give vsftpd write access in a specific directory?

  - by Arcturus

  Hello. I've set up vsftpd on my Fedora 12 server, and I'd like to have the following configuration. Each user should have access to: his home directory (/home/USER); the web directory I created for him (/web/USER). To achieve this, I first configured vsftpd to chroot each user to his home directory. Then, I created /web/USER with the correct permissions, and used mount --bind /web/USER /home/USER/Web so that the user may have access to /web/USER through /home/USER/Web. I also turned on the SELinux boolean ftp_home_dir so that vsftpd is allowed to write in users' home directories. This works very well, except that when a user tries to upload or rename a file in /home/USER/Web, SELinux forbids it because the change must also be done to /web/USER, and SELinux doesn't give vsftpd permission to write anything to that directory. I know that I could solve the problem by turning on the SELinux boolean allow_ftpd_full_access, or ftpd_disable_trans. I also tried to use audit2allow to generate a policy, but what it does is generate a policy that gives ftpd write access to directories of type public_content_t; this is equivalent to turning on allow_ftpd_full_access, if I understood it correctly. I'd like to know if it's possible to configure SELinux to allow FTP write access to the specific directory /web/USER and its contents, instead of disabling SELinux's FTP controls entirely.

  Read the article

• Using proxy.pac to access Apache 2 with a hostname?

  - by leeand00

  Note that I do not have a DNS on my network, and that is why I am resorting to using a proxy.pac file. I would like to be able to access my development Apache 2 server using a name instead of an ip without setting up a full blown DNS. I am aware of setting names in the C:\Windows\System32\drivers\etc\hosts file and the /etc/hosts files, however I cannot edit the hosts file on all of the devices that I am testing the site on. I've added a proxy.pac file to my Apache2 server and pointed my browsers settings to it at: http://192.168.2.221/proxyutils/proxy.pac ...where 192.168.2.221 is thehostname's ip address. I set the above URL in Firefox in the following manner: From the menubar selecting "Edit-Preferences" In the resulting "Firefox Preferences" window clicking the "Advanced" tab. Clicking the "Network" tab Clicking the "Settings" button. Selecting the "Automatic proxy configuration URL:" radio button. Entering http://192.168.2.221/proxyutils/proxy.pac and pressing OK. The contents of the proxy.pac file on the Apache server function FindProxyForURL(url, host) { if( dnsDomainIs(host, "thehostname") ) return "PROXY 192.168.2.221:80"; return "DIRECT"; } In Firefox I then access the following URL: http://thehostname/wp-blog/ And instead of the development version of the Wordpress blog I am trying to access I get a URL of http://thehostnamehttp/thehostname/wp-blog/ in my address bar and a 404 Not Found page in the browser window. Looking over proxy.pac, it seems like calling dnsDomainIs shouldn't work considering I don't have a DNS setup on my network, but I've also tried just comparing the host argument with the string "hostname" and it yielded the same result, even after modifying the proxy.pac file and clicking the reload button near the proxy settings. This could also be a Wordpress problem, since I've noticed that directories without Wordpress seem to function perfectly normally. (see cross post here) Is there any way I can modify my configuration so that I can access the site using http://thehostname/wp-blog/ ?

  Read the article

• On Windows 2008 R2, how do I back up DHCP if the DHCP .mdb database is always busy?

  - by johnny

  I get this from my backup software. C:\WINDOWS\system32\dhcp\dhcp.mdb : The process cannot access the file because it is being used by another process. C:\WINDOWS\system32\dhcp\j50.log : The process cannot access the file because it is being used by another process. C:\WINDOWS\system32\dhcp\j50tmp.log : The process cannot access the file because it is being used by another process. C:\WINDOWS\system32\dhcp\tmp.edb : The process cannot access the file because it is being used by another process. My questions: Should I be doing a manual backup of DHCP via command line tools or maybe with MMC, Action, Backup before I run my backup? Is the %SystemRoot%\System32\DHCP\Backup directory always kept up to date? (which does get backed up by backup software) I'm answering my own question but the registry key is set up for 3c, 60 minutes, I believe. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DHCPServer\Parameters\BackupInterva This is not the included backup software for Windows. It is another product, but I have seen this with every backup software I've ever used.

  Read the article

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• Restrict Computer or Users from Internet but allow access to intranet and Windows Update / ePO?

  - by MoSiAc

  So this may be impossible but I've been asked to try and find something about it. So far nothing I have found is possible. I need to restrict specific machines or user accounts from regular Internet access but let them have access to the intranet portion of our network. I do not have Active Directory control, nor does anyone at my local workplace (corporate control in a different state). I have tried going through IPsec and doing this per local machine, but that system seems to have been removed from the images that are installed on these machines so that is out. So far the only other option I can think of is assigning the machines a specific ip address and removing their gateway access. This would probably work but the machines need to be able to receive updates that are being pushed to them through ePO and LanDesk. I would really like to do this on the user level because then if I need to do tech work to the machine and need internet access I can get to it but a "special" user could login and not be able to get into anything.

  Read the article

• Can't access shared folder of win8/win7 machine - Error code: 0x80004005. Unspecified Error

  - by ruslan

  It's ironic that I, software engineer with 12 years of experience, continue to have this problem from one version of Windows to another without being able to achive consistent result (sometimes it works). Here it goes again. I have a machine with Win8 Consumer Preview. It doesn't really matter that it's win8. I had same issue with win7 before. On given machine I created local admin user with same name and password I have on second PC (the machine I'm typing this from now). I have two questions to you guys. Why I'm not able to access C$ share of win8 machine from another Win7 machine? I get error that C$ doesn't exist even though it does. Why I'm not able to access share named "test" in Win8 for which Permission set to Full for Everyone. When I attempt to access it from Win7 machine I'm asked to enter username and password. After entering administrator credentials I get error "Windows cannot access \192.168.1.123\test. Error code: 0x80004005. Unspecified Error". Windows Firewall is disabled on Win8 machine for both Private and Public networks. Guest account is disabled. Built-in admin account is enabled. Machine is pingable from other machines.

  Read the article

• How do I access my webserver on my stationary from my laptop?

  - by Steven

  I'm running Apache on my stationary and I would like to access a website through my laptop. This is some of the Apache config: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerName mysite.com DocumentRoot I:/wamp/www/mysite/ </VirtualHost> ServerName localhost:80 <Directory /> Options FollowSymLinks AllowOverride all Order deny,allow Deny from all </Directory> On my laptop I've added the following to the HOSTS file: 10.0.0.3 mysite.com But accessing the page through mysite.com is not very successfull. If I enter the IP address directly, I only get a Forbidden message. What do I need to do in order to get this to work? Update I'm runing WAMPSERVER 2.1 (Apache 2.2.17) Apache is up and running I can ping 10.0.0.3 from laptop I'm not able to ping http://mysite.com from laptop IE gives me a 403 Forbidden - The website declined to show this webpage The only log that get's entries when trying to access the website from my laptop, is access.log. access.log 10.0.0.4 - - [13/Jun/2011:10:14:04 +0200] "GET / HTTP/1.1" 403 202 apache_error.log [Mon Jun 13 10:08:16 2011] [error] VirtualHost localhost:0 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results UPDATE 2 My apache config has the following entry: AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 Could it be that this Allow from is stopping other computers accessing the page?

  Read the article

• Alternative method of viewing a database diagram in SQL Server to see what tables have gone missing?

  - by Triynko

  I have a database diagram for my database, but when I open it in SQL Server, I almost immediately get a message saying some permissions changed or tables in the diagram were dropped or renamed, and tables in the diagram vanish before I can even scroll over to see what or where they were. Basically, it's saying, "Hey, you know all that time you spent laying out tables in this diagram... half of them are going to vanish when you view it, and I'm not going to tell you which tables vanished or where they were in the diagram. You're just going to see a bunch of random empty spaces where tables used to be ;)" Ridiculous. So I thought that maybe if I look in the dbo.sysdiagrams table, I could look at some plain text definition of the diagram to get a clue about the names of the tables that went missing (because thier names were probably only changed slightly) or their coordinates in the diagram (because their spatial location would give me a clue as to what they were), so that I could re-add them, but I can't, because it's a binary definition. So, is there some other program I could use to view the existing database diagram that's not going to just drop and forget the missing tables without telling me what they were, or is this information lost and at the mercy of some SSMS-proprietary database diagram format and viewer which refuses to cooperate with me.

  Read the article

• Can SQL Server (2008) transaction logs handle the database being dropped and re-created?

  - by Ben

  We're trying to restore a database (created programatically by running a hand-crafted SQL script we have). Our backup routine is to create a full backup of every database on the SQL Server 2008 instance on a Saturday then automatic transaction logs (I assume these are created automatically anyway - we appear to have lots of log files, possibly one per transaction after the full backup was taken?). On Tuesday this week the database in question was dropped and another one with the exact same name and schema was created. SQL Server has continued to create transaction log files but it hasn't had chance to create a new full backup (that won't happen until next Saturday). Now as it turns out we need to restore the database to how it was on Thursday. This is after the "drop and re-create". My question is, is this possible? If it isn't, what exactly does SQL Server think that it's writing to those transaction logs created since the drop and re-create? (I understood they were kind of files containing a binary delta, which makes me think maybe we can restore from them?) I'm no DBA but then neither is our IT department, so I'm doing the best I can to resolve this. Any advice much appreciated!

  Read the article

• What can be done to improve time synchronization on networks with sporadic internet access?

  - by anregen

  I'm looking for advice setting up time servers for a very non-typical network. I support many closed networks that have occasional access to the internet. A network would get access most days for a few hours, but would frequently go 1-3 weeks blacked-out. The computers/servers on this network are mostly *nix-based, but not all the same flavor. The entire network is mobile, so when it connects, it will have very different hops/latency to internet time servers. The servers on the closed network are powered-off frequently (at least daily). Right now, my gut tells me to use NTP (because I hate re-learning all the stuff that someone else already got working pretty well). But I have several issues, and am looking for someone with experience in this type of strange situation. I currently have no solution in place, I'm simply letting the internal clocks drift. This results in errors of ~600s in a majority of networks. I have seen mismatch worse than 10,000s. Is there something "better" than NTP in this situation? I know NTP likes to have very frequent, consistent access to servers that give nearly identical answers. I won't have that. How many internal NTP servers should I configure, so that during periods of internet blackout, I have internal time that is consistent within the closed network? There is no human access. No matter how large the mismatch, the server(s) must attempt to correct itself. Discrete steps are very bad. No matter how large the mismatch, the correction must be "slewed", not "stepped". I understand that this could take many hours to correct.

  Read the article

• How do I set up Tomcat 7's server.xml to access a network share with an different url?

  - by jneff

  I have Apache Tomcat 7.0 installed on a Windows 2008 R2 Server. Tomcat has access to a share '\server\share' that has a documents folder that I want to access using '/foo/Documents' in my web application. My application is able to access the documents when I set the file path to '//server/share/documents/doc1.doc'. I don't want the file server's path to be exposed on my link to the file in my application. I want to be able to set the path to '/foo/Documents/doc1.doc'. In http://www3.ntu.edu.sg/home/ehchua/programming/howto/Tomcat_More.html under 'Setting the Context Root Directory and Request URL of a Webapp' item number two says that I can rename the path by putting in a context to the server.xml file. So I put <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html Note: The pattern used is equivalent to using pattern="common" --> <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="%h %l %u %t &quot;%r&quot; %s %b" /> <Context path="/foo" docBase="//server/share" reloadable="false"></Context> </Host> The context at the bottum was added. Then I tried to pull the file using '/foo/Documents/doc1.doc' and it didn't work. What do I need to do to get it to work correctly? Should I be using an alias instead? Are there other security issues that this may cause?

  Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >