Search Results

Search found 24865 results on 995 pages for 'default route'.

Page 523/995 | < Previous Page | 519 520 521 522 523 524 525 526 527 528 529 530  | Next Page >

  • Using WKA in Large Coherence Clusters (Disabling Multicast)

    - by jpurdy
    Disabling hardware multicast (by configuring well-known addresses aka WKA) will place significant stress on the network. For messages that must be sent to multiple servers, rather than having a server send a single packet to the switch and having the switch broadcast that packet to the rest of the cluster, the server must send a packet to each of the other servers. While hardware varies significantly, consider that a server with a single gigabit connection can send at most ~70,000 packets per second. To continue with some concrete numbers, in a cluster with 500 members, that means that each server can send at most 140 cluster-wide messages per second. And if there are 10 cluster members on each physical machine, that number shrinks to 14 cluster-wide messages per second (or with only mild hyperbole, roughly zero). It is also important to keep in mind that network I/O is not only expensive in terms of the network itself, but also the consumption of CPU required to send (or receive) a message (due to things like copying the packet bytes, processing a interrupt, etc). Fortunately, Coherence is designed to rely primarily on point-to-point messages, but there are some features that are inherently one-to-many: Announcing the arrival or departure of a member Updating partition assignment maps across the cluster Creating or destroying a NamedCache Invalidating a cache entry from a large number of client-side near caches Distributing a filter-based request across the full set of cache servers (e.g. queries, aggregators and entry processors) Invoking clear() on a NamedCache The first few of these are operations that are primarily routed through a single senior member, and also occur infrequently, so they usually are not a primary consideration. There are cases, however, where the load from introducing new members can be substantial (to the point of destabilizing the cluster). Consider the case where cluster in the first paragraph grows from 500 members to 1000 members (holding the number of physical machines constant). During this period, there will be 500 new member introductions, each of which may consist of several cluster-wide operations (for the cluster membership itself as well as the partitioned cache services, replicated cache services, invocation services, management services, etc). Note that all of these introductions will route through that one senior member, which is sharing its network bandwidth with several other members (which will be communicating to a lesser degree with other members throughout this process). While each service may have a distinct senior member, there's a good chance during initial startup that a single member will be the senior for all services (if those services start on the senior before the second member joins the cluster). It's obvious that this could cause CPU and/or network starvation. In the current release of Coherence (3.7.1.3 as of this writing), the pure unicast code path also has less sophisticated flow-control for cluster-wide messages (compared to the multicast-enabled code path), which may also result in significant heap consumption on the senior member's JVM (from the message backlog). This is almost never a problem in practice, but with sufficient CPU or network starvation, it could become critical. For the non-operational concerns (near caches, queries, etc), the application itself will determine how much load is placed on the cluster. Applications intended for deployment in a pure unicast environment should be careful to avoid excessive dependence on these features. Even in an environment with multicast support, these operations may scale poorly since even with a constant request rate, the underlying workload will increase at roughly the same rate as the underlying resources are added. Unless there is an infrastructural requirement to the contrary, multicast should be enabled. If it can't be enabled, care should be taken to ensure the added overhead doesn't lead to performance or stability issues. This is particularly crucial in large clusters.

    Read the article

  • Ubuntu 10.10 Ad-Hoc Setup (from Wireless Router, to Ubuntu Server/Desktop to Wireless Router)

    - by user60375
    Okay, so I know there are different approaches for this, but I will explain my story briefly before getting to the technical stuff. My fiancée and I are going through some financial issues (as I assume a lot of us are). We ended up having to move from our house and stay with some friends/family for 6 months, just to get ourselves caught up. (Medical bills, among other issues,etc). So this is where it gets fun. At our friends house, we are staying in the loft setup which is not near the cable modem and wireless router. I have a "hand-crafted" media center running XBMC, an Ubuntu 10.10 Server/Desktop (multi-purpose, very powerful and tons drive space), two working laptops, a between the two of us we have multiple wireless devices/phones. Now our friends Wireless router doesn't have any options for assigning IP addresses, but my router does. My current setup is: Friends Cable Modem -- Friend's Wireless Router -- Ubuntu 10.10 Server -- My Wireless Router (local-link from Friend's wireless (incoming) to sharing connection on ETH0 (outgoing)) -- to all devices. (Wireless Modem, Ubuntu Server that share's it's wireless incoming connection to the ethernet port my Wireless router share's with the rest of the devices). I setup my router to use default settings from my friend's router, using Google's DNS on my router (disabled DNS setup on Ubuntu Server), everything is assigned nicely and runs smooth. My Ubuntu server was given the address 10.42.43.1 (assuming standard from Network-Manager). (On the Ubuntu machine that shares to my wireless router; I have some server apps installed, but mainly just use Samba/NFS/Tangerine action. My problem/goal is that every device has no problem of accessing the internet from my router, the media-center has an assigned ip address, all services from all devices (ZeroConf, Avanhi, Bonjour, GIT, SSH, FTP, Apache2, etc) all work correctly except from my Ubuntu Server (which serves the wireless connection to ETH0 to another Wireless Router). The Ubuntu 10.10 Server/Desktop is not broadcasting anything (the Zeroconf Service Discovery 0.4 Gnome Applet shows the services from the Ubuntu server but no other computers can see them). I can access it from my Media-Center (Running Xbuntu 10.04) if I direct it to 10.42.43.1, no problem. But I cannot access Tangerine (Daapd) and the Samba shares do not show up on any computers for 10.42.43.1 (not in the WORKGROUP which Samba is setup simple and default but I can direct computers to that address and the shares will add except on a damn Windows 7 parition). Is this an issue with how I have my router setup and possible the gateway? An issue with Network-Manager? And issue with my Ubuntu Server/Desktop? I know there is a lot to that, but it's simpler than I probably have explained? Any help would be appreciated. If you need more details, I can provide them. If there is a better way of my attempting this home-network, please let me know. Thanks in advance for the help.

    Read the article

  • Yet another (13)Permission denied error on Apache2 server

    - by lollercoaster
    I just can't figure it out. I'm running apache2 on a Ubuntu 10.04 i386 server. Whenever I visit my server (has an IP address, and is connected to internet with static IP xxx.xxx.xxx.xxx) so that's not the problem) in browser, mysub.domain.edu (renamed here), I get the following: Forbidden You don't have permission to access /index.html on this server The apache2 error log confirms this: [Mon Apr 18 02:38:20 2011] [error] [client zzz.zzz.zzz.zzz] (13)Permission denied: access to / denied I'll try to provide all necessary information below: 1) Contents of /etc/apache2/httpd.conf DirectoryIndex index.html index.php 2) Contents of /etc/apache2/sites-available/default <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/myusername/htdocs <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/home/myusername/htdocs/"> Options Indexes FollowSymLinks MultiViews AllowOverride None order allow,deny allow from all DirectoryIndex index.html index.php Satisfy any </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> ServerName mysub.domain.edu </VirtualHost> 3) Contents of /etc/apache2/sites-enabled/000-default <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/myusername/htdocs <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/home/myusername/htdocs/"> Options Indexes FollowSymLinks MultiViews AllowOverride None order allow,deny allow from all DirectoryIndex index.html index.php Satisfy any </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> ServerName mysub.domain.edu </VirtualHost> 4) Result of ls -l (when I'm using sudo -i to be root): root@myserver:/home/myusername# ls -l total 4 drwxr-xr-x 2 www-data root 4096 2011-04-18 03:04 htdocs 5) ps auxwww | grep -i apache root@myserver:/home# ps auxwww | grep -i apache root 15121 0.0 0.4 5408 2544 ? Ss 16:55 0:00 /usr/sbin/apache2 -k start www-data 15122 0.0 0.3 5180 1760 ? S 16:55 0:00 /usr/sbin/apache2 -k start www-data 15123 0.0 0.5 227020 2788 ? Sl 16:55 0:00 /usr/sbin/apache2 -k start www-data 15124 0.0 0.5 227020 2864 ? Sl 16:55 0:00 /usr/sbin/apache2 -k start root 29133 0.0 0.1 3320 680 pts/0 R+ 16:58 0:00 grep --color=auto -i apache 6) ls -al /home/myusername/htdocs/ root@myserver:/# ls -al /home/myusername/htdocs/ total 20 drwxr-xr-x 2 www-data root 4096 2011-04-18 03:04 . drw-r--r-- 4 myusername myusername 4096 2011-04-18 02:13 .. -rw-r--r-- 1 root root 69 2011-04-18 02:14 index.html I'm not currently using any .htaccess files in my web root (htdocs) folder in my user folder. I don't know what is wrong, I've been trying to fix his for over 12 hours and I've gotten nowhere. If you have any suggestions, I'm all ears...

    Read the article

  • Hudson on debian lenny

    - by Laurent
    Hello, I installed Hudson deamon on one server (running on debian lenny testing) some time ago. All was working until I perform an upgrade. At this time Hudson isn't accessible at port 8080 (which is the default port used). I have looked for iptables problems, however port 8080 is open in INPUT and OUTPUT. Configuration file in /etc/default/hudson seems okay, I haven't touch it. And if I do a ps aux | grep hudson, hudson deamon is running. Update 1: What is really strange for me is that in /var/log/hudson/hudson.log I get no error : [Winstone 2010/02/10 17:10:04] - Control thread shutdown successfully [Winstone 2010/02/10 17:10:04] - Winstone shutdown successfully Running from: /usr/share/hudson/hudson.war [Winstone 2010/02/10 17:10:43] - Beginning extraction from war file hudson home directory: /var/lib/hudson [Winstone 2010/02/10 17:10:44] - HTTP Listener started: port=8080 [Winstone 2010/02/10 17:10:44] - AJP13 Listener started: port=8009 [Winstone 2010/02/10 17:10:44] - Winstone Servlet Engine v0.9.10 running: controlPort=disabled 10 févr. 2010 17:10:44 hudson.model.Hudson$4 onAttained INFO: Started initialization 10 févr. 2010 17:10:44 hudson.model.Hudson$4 onAttained INFO: Listed all plugins 10 févr. 2010 17:10:44 hudson.model.Hudson$4 onAttained INFO: Prepared all plugins 10 févr. 2010 17:10:44 hudson.model.Hudson$4 onAttained INFO: Started all plugins 10 févr. 2010 17:10:46 hudson.model.Hudson$4 onAttained INFO: Loaded all jobs 10 févr. 2010 17:10:46 hudson.model.Hudson$4 onAttained INFO: Completed initialization 10 févr. 2010 17:10:47 org.springframework.context.support.AbstractApplicationContext prepareRefresh INFO: Refreshing org.springframework.web.context.support.StaticWebApplicationContext@caa559d: display name [Root WebApplicationContext]; startup date [Wed Feb 10 17:10:47 CET 2010]; root of context hierarchy 10 févr. 2010 17:10:47 org.springframework.context.support.AbstractApplicationContext obtainFreshBeanFactory INFO: Bean factory for application context [org.springframework.web.context.support.StaticWebApplicationContext@caa559d]: org.springframework.beans.factory.support.DefaultListableBeanFactory@40d2f5f1 10 févr. 2010 17:10:47 org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons INFO: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@40d2f5f1: defining beans [daoAuthenticationProvider,authenticationManager,userDetailsService]; root of factory hierarchy 10 févr. 2010 17:10:47 org.springframework.context.support.AbstractApplicationContext prepareRefresh INFO: Refreshing org.springframework.web.context.support.StaticWebApplicationContext@4d88a387: display name [Root WebApplicationContext]; startup date [Wed Feb 10 17:10:47 CET 2010]; root of context hierarchy 10 févr. 2010 17:10:47 org.springframework.context.support.AbstractApplicationContext obtainFreshBeanFactory INFO: Bean factory for application context [org.springframework.web.context.support.StaticWebApplicationContext@4d88a387]: org.springframework.beans.factory.support.DefaultListableBeanFactory@6153e0c0 10 févr. 2010 17:10:47 org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons INFO: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@6153e0c0: defining beans [filter,legacy]; root of factory hierarchy 10 févr. 2010 17:10:47 hudson.TcpSlaveAgentListener <init> INFO: JNLP slave agent listener started on TCP port 59750 Update 2: What I get with lsof -i -n -P | grep hudson: java 28985 hudson 97u IPv6 2002707 0t0 TCP *:8080 (LISTEN) java 28985 hudson 99u IPv6 2002708 0t0 TCP *:8009 (LISTEN) java 28985 hudson 147u IPv6 2002711 0t0 TCP *:59750 (LISTEN) java 28985 hudson 150u IPv6 2002712 0t0 UDP *:33848 I don't know what I can verify. Does someone has an idea in order to help me to resolve this problem ?

    Read the article

  • Rsync: how to mount truecrypt on-the-fly on the receiving side?

    - by deepc
    The short version: how can I keep an rsync backup on a truecrypt volume? The hard part is to mount/unmount this volume on the fly when it is needed for rsync. Details This is my current backup configuration (which works fairly well for the most part): backup source is on Win7 64 bit, destination is a remote Linux box (Debian) actual data transfer is done by rsync via ssh (cwRsync with cygwin) rsync daemon is started on demand via ssh On the Linux box the backup is protected by file permissions only. I want to increase security here and put the backup into a truecrypt volume. I can fuse-mount that volume manually in the shell. The question is now how can I make rsync not only open an ssh connection and starting the rsync daemon, but also to mount the truecrypt volume before (and unmount it after)? My money is on option --rsync-path which can be used to pass a command line to ssh - provided that stdin and stdout still work the same. I guess that command would have to be a shell script. Is this possible, and what would the script look like? For reference, here's a quote of that option: --rsync-path=PROGRAM Use this to specify what program is to be run on the remote machine to start-up rsync. Often used when rsync is not in the default remote-shell's path (e.g. --rsync-path=/usr/local/bin/rsync). Note that PROGRAM is run with the help of a shell, so it can be any program, script, or command sequence you'd care to run, so long as it does not corrupt the standard-in & standard-out that rsync is using to communicate. One tricky example is to set a different default directory on the remote machine for use with the --relative option. For instance: rsync -avR --rsync-path="cd /a/b && rsync" host:c/d /e/ This is the full rsync man page. Truecrypt volume auto-mount Solved! Turns out this option is actually key to auto-mounting the truecrypt volume on the remote side. The following command line does the trick (one line!): rsync $options -e "ssh -p $port -i ../.ssh/id_dsa" --rsync-path="/usr/local/bin/truecrypt -d && /usr/local/bin/truecrypt --fs-options=rw,sync,utf8,uid=$UID,umask=0007 --non-interactive -p $password $pathToVolume $remoteMountDir && rsync" $localSourceDir $user:$remoteMountMountDir Truecrypt volume auto-dismount Still open: how can I unmount the volume when rsync is done? Not sure if the following makes sense to anyone but I give it a try... Right now I am unmounting (truecrypt -d), then mounting again, then continuing with rsync. At this time rsync needs to do its thing but I dont know when its done. Adding ... rsync && truecrypt -d to the command line does not work because then the rsync daemon does not start. This is because rsync starts the daemon with parameter --server on the remote side and that parameter would go to the final truecrypt -d.

    Read the article

  • Error installing pkgconfig via macports

    - by Greg K
    I installed Macports 1.8.2 from a DMG. That seemed to install fine. I ran sudo port selfupdate to make sure my ports tree was current. I then tried to install bindfs as I want to mount some directories in my OS X file system (like you can do with mount --bind in linux). pkgconfig and macfuse are two dependencies of bindfs. I had trouble installing bindfs due to errors installing pkgconfig, so I tried to just install pkgconfig, here's the debug output from sudo port install pkgconfig: $ sudo port -d install pkgconfig DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. ---> Computing dependencies for pkgconfig DEBUG: Executing org.macports.main (pkgconfig) DEBUG: Skipping completed org.macports.fetch (pkgconfig) DEBUG: Skipping completed org.macports.checksum (pkgconfig) DEBUG: Skipping completed org.macports.extract (pkgconfig) DEBUG: Skipping completed org.macports.patch (pkgconfig) ---> Configuring pkgconfig DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: Executing org.macports.configure (pkgconfig) DEBUG: Environment: CFLAGS='-O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC='/usr/bin/gcc-4.2' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... i386-apple-darwin10.3.0 checking host system type... i386-apple-darwin10.3.0 checking for style of include used by make... none checking for gcc... /usr/bin/gcc-4.2 checking for C compiler default output file name... configure: error: C compiler cannot create executables See `config.log' for more details. Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 while executing "$procedure $targetname" Warning: the following items did not execute (for pkgconfig): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. I have only recently installed Xcode 3.2.2 (prior to installing macports). Am I right in thinking this the issue here: configure: error: C compiler cannot create executables

    Read the article

  • DCOM Authentication Fails to use Kerberos, Falls back to NTLM

    - by Asa Yeamans
    I have a webservice that is written in Classic ASP. In this web service it attempts to create a VirtualServer.Application object on another server via DCOM. This fails with Permission Denied. However I have another component instantiated in this same webservice on the same remote server, that is created without problems. This component is a custom-in house component. The webservice is called from a standalone EXE program that calls it via WinHTTP. It has been verified that WinHTTP is authenticating with Kerberos to the webservice successfully. The user authenticated to the webservice is the Administrator user. The EXE to webservice authentication step is successful and with kerberos. I have verified the DCOM permissions on the remote computer with DCOMCNFG. The default limits allow administrators both local and remote activation, both local and remote access, and both local and remote launch. The default component permissions allow the same. This has been verified. The individual component permissions for the working component are set to defaults. The individual component permissions for the VirtualServer.Application component are also set to defaults. Based upon these settings, the webservice should be able to instantiate and access the components on the remote computer. Setting up a Wireshark trace while running both tests, one with the working component and one with the VirtualServer.Application component reveals an intresting behavior. When the webservice is instantiating the working, custom, component, I can see the request on the wire to the RPCSS endpoint mapper first perform the TCP connect sequence. Then I see it perform the bind request with the appropriate security package, in this case kerberos. After it obtains the endpoint for the working DCOM component, it connects to the DCOM endpoint authenticating again via Kerberos, and it successfully is able to instantiate and communicate. On the failing VirtualServer.Application component, I again see the bind request with kerberos go to the RPCC endpoing mapper successfully. However, when it then attempts to connect to the endpoint in the Virtual Server process, it fails to connect because it only attempts to authenticate with NTLM, which ultimately fails, because the webservice does not have access to the credentials to perform the NTLM hash. Why is it attempting to authenticate via NTLM? Additional Information: Both components run on the same server via DCOM Both components run as Local System on the server Both components are Win32 Service components Both components have the exact same launch/access/activation DCOM permissions Both Win32 Services are set to run as Local System The permission denied is not a permissions issue as far as I can tell, it is an authentication issue. Permission is denied because NTLM authentication is used with a NULL username instead of Kerberos Delegation Constrained delegation is setup on the server hosting the webservice. The server hosting the webservice is allowed to delegate to rpcss/dcom-server-name The server hosting the webservice is allowed to delegate to vssvc/dcom-server-name The dcom server is allowed to delegate to rpcss/webservice-server The SPN's registered on the dcom server include rpcss/dcom-server-name and vssvc/dcom-server-name as well as the HOST/dcom-server-name related SPNs The SPN's registered on the webservice-server include rpcss/webservice-server and the HOST/webservice-server related SPNs Anybody have any Ideas why the attempt to create a VirtualServer.Application object on a remote server is falling back to NTLM authentication causing it to fail and get permission denied? Additional information: When the following code is run in the context of the webservice, directly via a testing-only, just-developed COM component, it fails on the specified line with Access Denied. COSERVERINFO csi; csi.dwReserved1=0; csi.pwszName=L"terahnee.rivin.net"; csi.pAuthInfo=NULL; csi.dwReserved2=NULL; hr=CoGetClassObject(CLSID_VirtualServer, CLSCTX_ALL, &csi, IID_IClassFactory, (void **) &pClsFact); if(FAILED( hr )) goto error1; // Fails here with HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED) hr=pClsFact->CreateInstance(NULL, IID_IUnknown, (void **) &pUnk); if(FAILED( hr )) goto error2; Ive also noticed that in the Wireshark Traces, i see the attempt to connect to the service process component only requests NTLMSSP authentication, it doesnt even attmept to use kerberos. This suggests that for some reason the webservice thinks it cant use kerberos...

    Read the article

  • How to configure emacs by using this file?

    - by Andy Leman
    From http://public.halogen-dg.com/browser/alex-emacs-settings/.emacs?rev=1346 I got: (setq load-path (cons "/home/alex/.emacs.d/" load-path)) (setq load-path (cons "/home/alex/.emacs.d/configs/" load-path)) (defconst emacs-config-dir "~/.emacs.d/configs/" "") (defun load-cfg-files (filelist) (dolist (file filelist) (load (expand-file-name (concat emacs-config-dir file))) (message "Loaded config file:%s" file) )) (load-cfg-files '("cfg_initsplit" "cfg_variables_and_faces" "cfg_keybindings" "cfg_site_gentoo" "cfg_conf-mode" "cfg_mail-mode" "cfg_region_hooks" "cfg_apache-mode" "cfg_crontab-mode" "cfg_gnuserv" "cfg_subversion" "cfg_css-mode" "cfg_php-mode" "cfg_tramp" "cfg_killbuffer" "cfg_color-theme" "cfg_uniquify" "cfg_tabbar" "cfg_python" "cfg_ack" "cfg_scpaste" "cfg_ido-mode" "cfg_javascript" "cfg_ange_ftp" "cfg_font-lock" "cfg_default_face" "cfg_ecb" "cfg_browser" "cfg_orgmode" ; "cfg_gnus" ; "cfg_cyrillic" )) ; enable disabled advanced features (put 'downcase-region 'disabled nil) (put 'scroll-left 'disabled nil) (put 'upcase-region 'disabled nil) ; narrow cursor ;(setq-default cursor-type 'hbar) (cua-mode) ; highlight current line (global-hl-line-mode 1) ; AV: non-aggressive scrolling (setq scroll-conservatively 100) (setq scroll-preserve-screen-position 't) (setq scroll-margin 0) (custom-set-variables ;; custom-set-variables was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(ange-ftp-passive-host-alist (quote (("redbus2.chalkface.com" . "on") ("zope.halogen-dg.com" . "on") ("85.119.217.50" . "on")))) '(blink-cursor-mode nil) '(browse-url-browser-function (quote browse-url-firefox)) '(browse-url-new-window-flag t) '(buffers-menu-max-size 30) '(buffers-menu-show-directories t) '(buffers-menu-show-status nil) '(case-fold-search t) '(column-number-mode t) '(cua-enable-cua-keys nil) '(user-mail-address "[email protected]") '(cua-mode t nil (cua-base)) '(current-language-environment "UTF-8") '(file-name-shadow-mode t) '(fill-column 79) '(grep-command "grep --color=never -nHr -e * | grep -v .svn --color=never") '(grep-use-null-device nil) '(inhibit-startup-screen t) '(initial-frame-alist (quote ((width . 80) (height . 40)))) '(initsplit-customizations-alist (quote (("tabbar" "configs/cfg_tabbar.el" t) ("ecb" "configs/cfg_ecb.el" t) ("ange\\-ftp" "configs/cfg_ange_ftp.el" t) ("planner" "configs/cfg_planner.el" t) ("dired" "configs/cfg_dired.el" t) ("font\\-lock" "configs/cfg_font-lock.el" t) ("speedbar" "configs/cfg_ecb.el" t) ("muse" "configs/cfg_muse.el" t) ("tramp" "configs/cfg_tramp.el" t) ("uniquify" "configs/cfg_uniquify.el" t) ("default" "configs/cfg_font-lock.el" t) ("ido" "configs/cfg_ido-mode.el" t) ("org" "configs/cfg_orgmode.el" t) ("gnus" "configs/cfg_gnus.el" t) ("nnmail" "configs/cfg_gnus.el" t)))) '(ispell-program-name "aspell") '(jabber-account-list (quote (("[email protected]")))) '(jabber-nickname "AVK") '(jabber-password nil) '(jabber-server "halogen-dg.com") '(jabber-username "alex") '(remember-data-file "~/Plans/remember.org") '(safe-local-variable-values (quote ((dtml-top-element . "body")))) '(save-place t nil (saveplace)) '(scroll-bar-mode (quote right)) '(semantic-idle-scheduler-idle-time 432000) '(show-paren-mode t) '(svn-status-hide-unmodified t) '(tool-bar-mode nil nil (tool-bar)) '(transient-mark-mode t) '(truncate-lines f) '(woman-use-own-frame nil)) ; ?? ????? ??????? y ??? n? (fset 'yes-or-no-p 'y-or-n-p) (custom-set-faces ;; custom-set-faces was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(compilation-error ((t (:foreground "tomato" :weight bold)))) '(cursor ((t (:background "red1")))) '(custom-variable-tag ((((class color) (background dark)) (:inherit variable-pitch :foreground "DarkOrange" :weight bold)))) '(hl-line ((t (:background "grey24")))) '(isearch ((t (:background "orange" :foreground "black")))) '(message-cited-text ((((class color) (background dark)) (:foreground "SandyBrown")))) '(message-header-name ((((class color) (background dark)) (:foreground "DarkGrey")))) '(message-header-other ((((class color) (background dark)) (:foreground "LightPink2")))) '(message-header-subject ((((class color) (background dark)) (:foreground "yellow2")))) '(message-separator ((((class color) (background dark)) (:foreground "thistle")))) '(region ((t (:background "brown")))) '(tooltip ((((class color)) (:inherit variable-pitch :background "IndianRed1" :foreground "black"))))) The above is a python emacs configure file. Where should I put it to use it? And, are there any other changes I need to make?

    Read the article

  • Useful Command-line Commands on Windows

    - by Sung Meister
    The aim for this Wiki is to promote using a command to open up commonly used applications without having to go through many mouse clicks - thus saving time on monitoring and troubleshooting Windows machines. Answer entries need to specify Application name Commands Screenshot (Optional) Shortcut to commands && - Command Chaining %SYSTEMROOT%\System32\rcimlby.exe -LaunchRA - Remote Assistance (Windows XP) appwiz.cpl - Programs and Features (Formerly Known as "Add or Remove Programs") appwiz.cpl @,2 - Turn Windows Features On and Off (Add/Remove Windows Components pane) arp - Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP) at - Schedule tasks either locally or remotely without using Scheduled Tasks bootsect.exe - Updates the master boot code for hard disk partitions to switch between BOOTMGR and NTLDR cacls - Change Access Control List (ACL) permissions on a directory, its subcontents, or files calc - Calculator chkdsk - Check/Fix the disk surface for physical errors or bad sectors cipher - Displays or alters the encryption of directories [files] on NTFS partitions cleanmgr.exe - Disk Cleanup clip - Redirects output of command line tools to the Windows clipboard cls - clear the command line screen cmd /k - Run command with command extensions enabled color - Sets the default console foreground and background colors in console command.com - Default Operating System Shell compmgmt.msc - Computer Management control.exe /name Microsoft.NetworkAndSharingCenter - Network and Sharing Center control keyboard - Keyboard Properties control mouse(or main.cpl) - Mouse Properties control sysdm.cpl,@0,3 - Advanced Tab of the System Properties dialog control userpasswords2 - Opens the classic User Accounts dialog desk.cpl - opens the display properties devmgmt.msc - Device Manager diskmgmt.msc - Disk Management diskpart - Disk management from the command line dsa.msc - Opens active directory users and computers dsquery - Finds any objects in the directory according to criteria dxdiag - DirectX Diagnostic Tool eventvwr - Windows Event Log (Event Viewer) explorer . - Open explorer with the current folder selected. explorer /e, . - Open explorer, with folder tree, with current folder selected. F7 - View command history find - Searches for a text string in a file or files findstr - Find a string in a file firewall.cpl - Opens the Windows Firewall settings fsmgmt.msc - Shared Folders fsutil - Perform tasks related to FAT and NTFS file systems ftp - Transfers files to and from a computer running an FTP server service getmac - Shows the mac address(es) of your network adapter(s) gpedit.msc - Group Policy Editor gpresult - Displays the Resultant Set of Policy (RSoP) information for a target user and computer httpcfg.exe - HTTP Configuration Utility iisreset - To restart IIS InetMgr.exe - Internet Information Services (IIS) Manager 7 InetMgr6.exe - Internet Information Services (IIS) Manager 6 intl.cpl - Regional and Language Options ipconfig - Internet protocol configuration lusrmgr.msc - Local Users and Groups Administrator msconfig - System Configuration notepad - Notepad? ;) mmsys.cpl - Sound/Recording/Playback properties mode - Configure system devices more - Displays one screen of output at a time mrt - Microsoft Windows Malicious Software Removal Tool mstsc.exe - Remote Desktop Connection nbstat - displays protocol statistics and current TCP/IP connections using NBT ncpa.cpl - Network Connections netsh - Display or modify the network configuration of a computer that is currently running netstat - Network Statistics net statistics - Check computer up time net stop - Stops a running service. net use - Connects a computer to or disconnects a computer from a shared resource, or displays information about computer connections odbcad32.exe - ODBC Data Source Administrator pathping - A traceroute that collects detailed packet loss stats perfmon - Opens Reliability and Performance Monitor ping - Determine whether a remote computer is accessible over the network powercfg.cpl - Power management control panel applet quser - Display information about user sessions on a terminal server qwinsta - See disconnected remote desktop sessions reg.exe - Console Registry Tool for Windows regedit - Registry Editor rasdial - Connects to a VPN or a dialup network robocopy - Backup/Restore/Copy large amounts of files reliably rsop.msc - Resultant Set of Policy (shows the combined effect of all group policies active on the current system/login) runas - Run specific tools and programs with different permissions than the user's current logon provides sc - Manage anything you want to do with services. schtasks - Enables an administrator to create, delete, query, change, run and end scheduled tasks on a local or remote system. secpol.msc - Local Security Settings services.msc - Services control panel set - Displays, sets, or removes cmd.exe environment variables. set DIRCMD - Preset dir parameter in cmd.exe start - Starts a separate window to run a specified program or command start. - opens the current directory in the Windows Explorer. shutdown.exe - Shutdown or Reboot a local/remote machine subst.exe - Associates a path with a drive letter, including local drives systeminfo -Displays a comprehensive information about the system taskkill - terminate tasks by process id (PID) or image name tasklist.exe - List Processes on local or a remote machine taskmgr.exe - Task Manager telephon.cpl - Telephone and Modem properties timedate.cpl - Date and Time title - Change the title of the CMD window you have open tracert - Trace route wmic - Windows Management Instrumentation Command-line winver.exe - Find Windows Version wscui.cpl - Windows Security Center wuauclt.exe - Windows Update AutoUpdate Client

    Read the article

  • How to load the environment variables at boot time before X11 on Ubuntu Precise?

    - by Fnux
    Using Ubuntu Precise 64 bit, I'm facing a problem that I'm unable to solve and that I'll try to describe below: I'm using a console mode program (let's say abc) that uses Go, NodeJS, Java and Scala. In order for abc to work with these languages, I've to declare the following statements: a) within /etc/environment: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar b) within /etc/login.defs ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin c) a) within /etc/sudoers: `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin"` Then, when I start abc from a terminal, all is fine and I can use any of the 4 languages described above. However, if I put a script within /etc/init.d that starts abc during the boot process (i.e. before to start the GUI), using Java from abc still is fine, but using Go, NodeJS or Scala doesn't work anymore. Then, I guess that during the boot process, the script within /etc/init.d that starts abc is executed before that the different environment variables set within /etc/sudoers, /etc/environment and /etc/login.defs are loaded. So, my question is: how to force the environment variables to be loaded before that my script starting abc is launched? Any help and advice on this topic would be trully appreciated. TIA. Cheers. Thanks again to Mark and Danila. Below is the current "abc" script file that I put within /etc/init.d `#! /bin/sh ### EDIT: ADD THIS VARS DEFINITIONS: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar "ENV_SUPATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "ENV_PATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "Defaults secure_path"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ##### EXPORT this VARS so they are accessible to children:" export "PATH" "CLASSPATH" "ENV_SUPATH PATH" "ENV_PATH PATH" "Defaults secure_path" `### BEGIN INIT INFO `# Provides: abc `# Required-Start: $remote_fs $syslog `# Required-Stop: $remote_fs $syslog `# Default-Start: 2 3 4 5 `# Default-Stop: 0 1 6 `# Short-Description: abc initscript `# Description: This iniscript starts and stops abc `### END INIT INFO `# Author: Fnux, fnux.fl at gmail dot com `# Version: 1.2 `# Note: (edit ABC_PATH if abc isn't installed in /opt/abc) NAME=abc ABC_PATH=/opt/abc START="-d" STOP="-k" VERSION="-v" SCRIPTNAME=/etc/init.d/$NAME STARTMESG="\nStarting abc in deamon mode." UPMESG="\n$NAME is running." DOWNMESG="\n$NAME is not running." STATUS=`pidof $NAME` `# Exit if abc is not installed [ -x "$ABC_PATH/$NAME" ] || exit 0 case "$1" in start) echo $STARTMESG cd $ABC_PATH ./$NAME $START ;; stop) cd $ABC_PATH ./$NAME $STOP ;; status) if [ "$STATUS" > 0 ] ; then echo $UPMESG else echo $DOWNMESG fi ;; restart) cd $ABC_PATH ./$NAME $STOP echo $STARTMESG ./$NAME $START ;; version) cd $ABC_PATH ./$NAME $VERSION ;; *) echo "Usage: $SCRIPTNAME {start|status|restart|stop|version}" >&2 exit 3 ;; esac : So, where and how should I write the needed environment variables for: a) Go needs the following statements (ie: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin") b) and Scala needs this one: (ie CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar). TIA for an explanation how to do so. Cheers.

    Read the article

  • I want to change DPI with Imagemagick without changing the actual byte-size of the image data

    - by user1694803
    I feel so horribly sorry that I have to ask this question here, but after hours of researching how to do an actually very simple task I'm still failing... In Gimp there is a very simple way to do what I want. I only have the German dialog installed but I'll try to translate it. I'm talking about going to "Picture-PrintingSize" and then adjusting the Values "X-Resolution" and "Y-Resolution" which are known to me as so called DPI values. You can also choose the format which by default is "Pixel/Inch". (In German the dialog is "Bild-Druckgröße" and there "X-Auflösung" and "Y-Auflösung") Ok, the values there are often "72" by default. When I change them to e.g. "300" this has the effect that the image stays the same on the computer, but if I print it, it will be smaller if you look at it, but all the details are still there, just smaller - it has a higher resolution on the printed paper (but smaller size... which is fine for me). I am often doing that when I am working with LaTeX, or to be exact with the command "pdflatex" on a recent Ubuntu-Machine. When I'm doing the above process with Gimp manually everything works just fine. The images will appear smaller in the resulting PDF but with high printing quality. What I am trying to do is to automate the process of going into Gimp and adjusting the DPI values. Since Imagemagick is known to be superb and I used it for many other tasks I tried to achieve my goal with this tool. But it does just not do what I want. After trying a lot of things I think this actually is be the command that should be my friend: convert input.png -density 300 output.png This should set the DPI to 300, as I can read everywhere in the web. It seems to work. When I check the file it stays the same. file input.png output.png input.png: PNG image data, 611 x 453, 8-bit grayscale, non-interlaced output.png: PNG image data, 611 x 453, 8-bit grayscale, non-interlaced When I use this command, it seems like it did what I wanted: identify -verbose output.png | grep 300 Resolution: 300x300 PNG:pHYs : x_res=300, y_res=300, units=0 (Funny enough, the same output comes for input.png which confuses me... so this might be the wrong parameters to watch?) But when I now render my TeX with "pdflatex" the image is still big and blurry. Also when I open the image with Gimp again the DPI values are set to "72" instead of "300". So there actually was no effect at all. Now what is the problem here. Am I getting something completely wrong? I can't be that wrong since everything works just fine with Gimp... Thanks for any help in this. I am also open to other automated solutions which are easily done on a Linux system...

    Read the article

  • Initial Cisco ASA 5510 Config

    - by Brendan ODonnell
    Fair warning, I'm a but of a noob so please bear with me. I'm trying to set up a new ASA 5510. I have a pretty simple set up with one /24 on the inside NATed to a DHCP address on the outside. Everything on the inside works and I can ping the outside interface from external devices. No matter what I do I can't get anything internal to route across the border to the outside and back. To try and eliminate ACL issues as a possibility I added permit any any rules to the incoming access lists on the inside and outside interfaces. I'd appreciate any help I can get. Here's the sh run. : Saved : ASA Version 8.4(3) ! hostname gateway domain-name xxx.local enable password xxx encrypted passwd xxx encrypted names ! interface Ethernet0/0 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/1 nameif inside security-level 100 ip address 10.x.x.x 255.255.255.0 ! interface Ethernet0/2 shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 management-only ! ftp mode passive dns domain-lookup inside dns server-group DefaultDNS name-server 10.x.x.x domain-name xxx.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-network subnet 10.x.x.x 255.255.255.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list outside_access_in extended permit ip any any access-list inside_access_in extended permit ip any any pager lines 24 logging enable logging buffered informational logging asdm informational mtu management 1500 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside icmp permit any outside no asdm history enable arp timeout 14400 ! object network inside-network nat (any,outside) dynamic interface access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 192.168.1.0 255.255.255.0 management http 10.x.x.x 255.255.255.0 inside http authentication-certificate management http authentication-certificate inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart telnet timeout 5 ssh 192.168.1.0 255.255.255.0 management ssh 10.x.x.x 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 dhcp-client client-id interface outside dhcpd address 192.168.1.2-192.168.1.254 management dhcpd enable management ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn username xxx password xxx encrypted ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect icmp ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:fe19874e18fe7107948eb0ada6240bc2 : end no asdm history enable

    Read the article

  • RHEL - NFS4: Mounted/Exported as rw, user write permission denied

    - by brendanmac
    Hello, I have nfs4 configured between a RHEL 5.3 server (charlie) and a RHEL 5.4 client (simcom1). The machines are configured to authenticate users via kerberos by a Windows Server 2008 active directory machine called "alpha." Alpha also serves as a dns and dhcp machine for the local network. I notice that when a user logs in to a RHEL machine for the first time they are issued a unique uid to that machine; The first user to log on gets 10001. So, what I see is that users between simcom1 and charlie have different UIDs. When a user does an 'ls -la' command from within an nfs4 mount I would have thought that the usernames in the owner column would indicate 'nobody' or at least the wrong user name - since UIDs are different between the machines for each user, and not all users have logged into each machine. However, the simcom1 is able to resolve usernames in an 'ls -la' executed on files residing on charlie via nfs4 correctly. Most troubling is that users are unable to write to files across the nfs mount. The server, charlie, has the root directory exported as rw. The client, simcom1, mounts the export as rw. My configurations are shown below. My question is, how do I configure the RHEL machines to allow users to write files across nfs4 that is already mounted as read/write? [root@charlie ~]# more /etc/exports / 10.100.0.0/16(rw,no_root_squash,fsid=0) [root@charlie ~]#cat /etc/sysconfig/nfs # # Define which protocol versions mountd # will advertise. The values are "no" or "yes" # with yes being the default #MOUNTD_NFS_V1="no" #MOUNTD_NFS_V2="no" #MOUNTD_NFS_V3="no" # # # Path to remote quota server. See rquotad(8) #RQUOTAD="/usr/sbin/rpc.rquotad" # Port rquotad should listen on. #RQUOTAD_PORT=875 # Optinal options passed to rquotad #RPCRQUOTADOPTS="" # # # TCP port rpc.lockd should listen on. #LOCKD_TCPPORT=32803 # UDP port rpc.lockd should listen on. #LOCKD_UDPPORT=32769 # # # Optional arguments passed to rpc.nfsd. See rpc.nfsd(8) # Turn off v2 and v3 protocol support #RPCNFSDARGS="-N 2 -N 3" # Turn off v4 protocol support #RPCNFSDARGS="-N 4" # Number of nfs server processes to be started. # The default is 8. RPCNFSDCOUNT=8 # Stop the nfsd module from being pre-loaded #NFSD_MODULE="noload" # # # Optional arguments passed to rpc.mountd. See rpc.mountd(8) #STATDARG="" #RPCMOUNTDOPTS="" # Port rpc.mountd should listen on. #MOUNTD_PORT=892 # # # Optional arguments passed to rpc.statd. See rpc.statd(8) #RPCIDMAPDARGS="" # # Set to turn on Secure NFS mounts. SECURE_NFS="no" # Optional arguments passed to rpc.gssd. See rpc.gssd(8) #RPCGSSDARGS="-vvv" # Optional arguments passed to rpc.svcgssd. See rpc.svcgssd(8) #RPCSVCGSSDARGS="-vvv" # Don't load security modules in to the kernel #SECURE_NFS_MODS="noload" # # Don't load sunrpc module. #RPCMTAB="noload" # [root@simcom1 ~]# cat /etc/fstab --start snip-- charlie:/home /usr/local/dev/charlie nfs4 rw,nosuid, 0 0 --end snip-- [brendanmac@simcom1 /usr/local/dev/charlie/brendanmac]# touch file touch: cannot touch 'file': Permission denied [brendanmac@simcom1 /usr/local/dev/charlie/brendanmac]# su Password: [root@simcom1 /usr/local/dev/charlie/brendanmac]# touch file [root@simcom1 /usr/local/dev/charlie/brendanmac]# ls -la file -rw------- 1 root root 0 May 26 10:43 file Thank you for your assistance, Brendan

    Read the article

  • Broken cups installation on a ubuntu server 64

    - by user67046
    Hi, I am having trouble with an cups installation. It seems to be in a broken state. When i try to reinstall it it stalls, the same if i try to remove it completely. I am running the server version 64 bit of Ubuntu 10.10 with kernel Linux version 2.6.35-22-server. When i try to start the cups daemon with the following command sudo service cups start It just stays there and nothing happens. I have tried to remove it, to be able to reinstall it, with the following command sudo apt-get purge cups It finally stalls with the following message Removing cups ... After that nothing happens. The process tree for the apt-get command looks like this. 1404 1404 1404 ? 00:00:00 sshd 26495 26495 26495 ? 00:00:00 sshd 26581 26495 26495 ? 00:00:00 sshd 26582 26582 26582 pts/4 00:00:00 bash 27158 27158 26582 pts/4 00:00:00 apt-get 27172 27172 27172 pts/2 00:00:00 dpkg 27176 27172 27172 pts/2 00:00:00 cups.prerm 27178 27172 27172 pts/2 00:00:00 stop I have tried to leave the process running for a while to see if i get any error messages but without success. To get out of it I have to kill the processes. sudo dpkg --configure cups dpkg: error processing cups (--configure): package cups is already installed and configured Errors were encountered while processing: cups sudo dpkg --status cups Package: cups Status: purge ok installed Priority: optional Section: net Installed-Size: 8292 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Version: 1.4.4-6ubuntu2.3 Replaces: cupsddk-drivers (<< 1.4.0) Provides: cupsddk-drivers Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.7), libcups2 (>= 1.4.4-3~), libcupscgi1 (>= 1.4.2), libcupsdriver1 (>= 1.4.0), libcupsimage2 (>= 1.4.0), libcupsmime1 (>= 1.4.0), libcupsppdc1 (>= 1.4.0), libdbus-1-3 (>= 1.0.2), libgcc1 (>= 1:4.1.1), libgnutls26 (>= 2.7.14-0), libgssapi-krb5-2 (>= 1.8+dfsg), libijs-0.35, libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libpam0g (>= 0.99.7.1), libpaper1, libpoppler7, libslp1, libstdc++6 (>= 4.1.1), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), debconf (>= 1.2.9) | debconf-2.0, upstart-job, poppler-utils (>= 0.12), procps, ghostscript, lsb-base (>= 3), cups-common (>= 1.4.4), cups-client (>= 1.4.4-6ubuntu2.3), ssl-cert (>= 1.0.11), adduser, bc, ttf-freefont, cups-ppdc Recommends: foomatic-filters (>= 4.0), cups-driver-gutenprint, ghostscript-cups Suggests: cups-bsd, foomatic-db-compressed-ppds | foomatic-db, hplip, xpdf-korean | xpdf-japanese | xpdf-chinese-traditional | xpdf-chinese-simplified, cups-pdf, smbclient (>= 3.0.9), udev Breaks: foomatic-filters (<< 4.0) Conflicts: cupsddk-drivers (<< 1.4.0) Conffiles: /etc/fonts/conf.d/99pdftoopvp.conf a5221cfad70a981c80864229ef56586d /etc/logrotate.d/cups 5bb41fa9900f0d1c565954405a2bd7c4 /etc/default/cups 2b436fbb1a32b82b6aba45a76a1d7e40 /etc/pam.d/cups ff2488324854f7b1e892bb0df062d5f0 /etc/init/cups.conf 1a3cd022e8474e3d2b44640f33ce68e3 /etc/ufw/applications.d/cups 29e98a6d850da251e180c3d68dec2bd3 /etc/apparmor.d/usr.sbin.cupsd 60c4b26bfd5c033baa3dd48a3b2e9911 /etc/cups/cupsd.conf e2c7ec15835ea0939e5e86f7c6efcc03 /etc/cups/snmp.conf 2326a8af1e112676d55245bc5eb459ca /etc/cups/cupsd.conf.default a68d54d76021e857dd1d64edf57d36c5 Description: Common UNIX Printing System(tm) - server The Common UNIX Printing System (or CUPS(tm)) is a printing system and general replacement for lpd and the like. It supports the Internet Printing Protocol (IPP), and has its own filtering driver model for handling various document types. . This package provides the CUPS scheduler/daemon and related files. Original-Maintainer: Debian CUPS Maintainers <[email protected]> Would be greatful if someone could provide some help on how to solve this issue.

    Read the article

  • Disk operations freeze Debian

    - by Grzenio
    Hi, I have just installed Debian testing on my new desktop and I am not very happy with performance - when I perform a disk intensive operation, e.g. upgrade packages in the system, everything seems to freeze, e.g. changing tabs in Iceweasel takes 3 seconds. I run the Debian on my 3 year old Thinkpad X60 ultra-portable, and I don't have these issues. (every single parameter of the laptop is much worse than the desktop). I am using the default packaged kernel and scripts. I run hdparm -t /dev/sda1 And I got around 96GB/s, which is expected. What else can I try to make it work better? EDIT: grzes:/home/ga# hdparm -i /dev/sda /dev/sda: Model=WDC WD15EARS-00Z5B1, FwRev=80.00A80, SerialNo=WD-WMAVU1362357 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=2930277168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7 * signifies the current active mode EDIT2: Even my wife said "on this new computer I can't do anything when I copy the photos from the camera and its much worse than on the old one". So it must be serious. EDIT3: Updated to 2.6.32, but still no improvement EDIT4: I forgot to mention that the new disk is ext4, the old was ext3. EDIT5: Still not solved. I have a P43 ASUS P5QL-E board. Lines from dmesg that seem relevant: [ 0.370850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.370852] io scheduler noop registered [ 0.370853] io scheduler anticipatory registered [ 0.370854] io scheduler deadline registered [ 0.370876] io scheduler cfq registered (default) ... [ 0.908233] ata_piix 0000:00:1f.2: version 2.13 [ 0.908243] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.908246] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.908275] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.908316] scsi0 : ata_piix [ 0.908374] scsi1 : ata_piix [ 0.909180] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 [ 0.909183] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 [ 0.909199] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.909202] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.909228] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.909279] scsi2 : ata_piix [ 0.909326] scsi3 : ata_piix [ 0.910021] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 [ 0.910024] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 [ 0.915575] FDC 0 is a post-1991 82077 ... [ 1.716062] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.716074] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.724318] ata1.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133 [ 1.724322] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.740339] ata1.00: configured for UDMA/133 [ 1.740428] scsi 0:0:0:0: Direct-Access ATA WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5 [ 1.746788] scsi 6:0:0:0: CD-ROM ASUS DRW-1608P 1.17 PQ: 0 ANSI: 5 ... [ 1.925981] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.926005] sd 0:0:0:0: [sda] Write Protect is off [ 1.926007] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.926020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.926092] sda:sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.931106] Uniform CD-ROM driver Revision: 3.20 [ 1.931191] sr 6:0:0:0: Attached scsi CD-ROM sr0 ... [ 1.941936] sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.967691] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.970938] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.970959] sr 6:0:0:0: Attached scsi generic sg1 type 5 ... [ 2.500086] EXT4-fs (sda3): mounted filesystem with ordered data mode ... [ 7.150468] EXT4-fs (sda6): mounted filesystem with ordered data mode

    Read the article

  • How to publish an ASP.NET MVC application to a free host

    - by Lirik
    Hi, I'm using a free web host (0000free) which supports ASP.NET MVC, but it uses Mono. This is the first time I deploy an MVC application, so I'm a little confused as to where I need to deploy it. I have Visual Studio 2010 and I used its Publish Feature (i.e. right click on the project name and click publish) and I tried several things: Publish method: FTP to the root folder. Publish method: FTP to the publich_html folder. Publish method: File System to the root folder. Publish method: File System to the publich_html folder. Publish method: File System to a local directory on my computer and then FTP to root and also tried the public_html folder. I went into the cPanel (control panel) to try and see if ASP.NET has to be added/enabled for my web site, but I didn't see anything there. I can't browse to Index.aspx nor can I redirect to it from index.html (as suggested from other posts on the host forum), right now I have a link from index.html to Index.aspx but it's not working either (see http://www.mydevarmy.com) I've also tried renaming Index.aspx to Default.aspx, but that doesn't work either. The search utility of the forum of the host is somewhat weak, so I use google to search their forum: http://www.google.com/search?q=publish+asp.net+site%3A0000free.com%2Fforum%2F&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a I've been reading Pro ASP.NET MVC Framework and they have a chapter about publishing, but it doesn't provide any specific information with respect to the location of publishing, this is all they say (and it's not very helpful in my case): Where Should I Put My Application? You can deploy your application to any folder on the server. When IIS first installs, it automatically creates a folder for a web site called Default Web Site at c:\Inetpub\wwwroot\, but you shouldn’t feel any obligation to put your application files there. It’s very common to host applications on a different physical drive from the operating system (e.g., in e:\websites\ example.com). It’s entirely up to you, and may be influenced by concerns such as how you plan to back up the server. Here is the exception I get when I try to view my Index.aspx page: Unrecognized attribute 'targetFramework'. (/home/devarmy/public_html/Web.config line 1) Description: HTTP 500. Error processing request. Stack Trace: System.Configuration.ConfigurationErrorsException: Unrecognized attribute 'targetFramework'. (/home/devarmy/public_html/Web.config line 1) at System.Configuration.ConfigurationElement.DeserializeElement (System.Xml.XmlReader reader, Boolean serializeCollectionKey) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSection.DoDeserializeSection (System.Xml.XmlReader reader) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSection.DeserializeSection (System.Xml.XmlReader reader) [0x00000] in <filename unknown>:0 at System.Configuration.Configuration.GetSectionInstance (System.Configuration.SectionInfo config, Boolean createDefaultInstance) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSectionCollection.get_Item (System.String name) [0x00000] in <filename unknown>:0 at System.Configuration.Configuration.GetSection (System.String path) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetSection (System.String sectionName, System.String path, System.Web.HttpContext context) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetSection (System.String sectionName, System.String path) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetWebApplicationSection (System.String sectionName) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.get_CompilationConfig () [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.Build (System.Web.VirtualPath vp) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.GetCompiledType (System.Web.VirtualPath virtualPath) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.GetCompiledType (System.String virtualPath) [0x00000] in <filename unknown>:0 at System.Web.HttpApplicationFactory.InitType (System.Web.HttpContext context) [0x00000] in <filename unknown>:0

    Read the article

  • dvd drive I/O error?

    - by bobby
    i get dis error evry time i burn a cd/dvd thru my dvd drive...!! Nero Burning ROM bobby 4C85-200E-4005-0004-0000-7660-0800-35X3-0000-407M-MX37-**** (*) Windows XP 6.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.11.3. Internal Version: 7, 11, 3, (Nero Express) Recorder: Version: UL01 - HA 1 TA 1 - 7.11.3.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: Version: 52PP - HA 1 TA 0 - 7.11.3.0 Adapter driver: HA 1 === Scsi-Device-Map === === CDRom-Device-Map === ATAPI-CD ROM-DRIVE-52MAX F: CdRom0 HL-DT-ST DVDRAM GSA-H12N G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 958MB (981560kB) Free physical memory: 309MB (317024kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.6.2010 CD Image 10:43:02 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:43:02 AM #2 Text 0 File Burncd.cpp, Line 3186 HL-DT-ST DVDRAM GSA-H12N Buffer underrun protection activated 10:43:02 AM #3 Text 0 File Burncd.cpp, Line 3500 Turn on Disc-At-Once, using CD-R/RW media 10:43:02 AM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 318783 ( 70:52.33) 10:43:02 AM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:43:02 AM #6 Text 0 File DlgWaitCD.cpp, Line 2988 Recorder: HL-DT-ST DVDRAM G SA-H12N; CDR co de: 00 97 27 18; O SJ entry from: Pla smon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A ( LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 0 0 00 (invalid) 10:43:02 AM #7 Text 0 File DlgWaitCD.cpp, Line 493 Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318784 blo cks [G: HL-DT-ST DVDRAM GSA-H12N] -------------------------------------------------------------- 10:43:02 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [G: HL-DT-ST DVDRAM GSA-H12N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Se ssion Clo sed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next T rk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 6531768 32, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 318784 | 318784 | 0x00 318784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:43:02 AM #10 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:43:02 AM #11 Text 0 File Burncd.cpp, Line 4286 Caching options: cache CDRom or Network-Yes, small files-Yes ( ON 10:43:03 AM #19 Text 0 File MMC.cpp, Line 18034 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 46 34 22 10:43:03 AM #20 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 83836800 10:43:16 AM #21 Text 0 File Cdrdrv.cpp, Line 1405 10:43:16.806 - G: HL-DT-ST DVDRAM GSA-H12N : Queue again later 10:43:42 AM #22 SPTI -1502 File SCSIPassThrough.cpp, Line 181 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1502) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Nero Report 2 Nero Burning ROM Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 4D 00 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 10 53 29 A1 80 08 03 Buffer x0c7d9a40: Len x10000 0xDC 87 EB 41 6E AC 61 5A 07 B2 DB 78 B5 D4 D9 24 0x8D BC 51 38 46 56 0F EE 16 15 5C 5B E3 B0 10 16 0x14 B1 C3 6E 30 2B C4 78 15 AB D5 92 09 B7 81 23 10:43:42 AM #23 CDR -1502 File Writer.cpp, Line 306 DMA-driver error, CRC error G: HL-DT-ST DVDRAM GSA-H12N 10:43:55 AM #24 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 48x (7,200 KB/s) 10:43:55 AM #25 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:44:01 AM #26 Text 0 File Cdrdrv.cpp, Line 11412 DriveLocker: UnLockVolume completed 10:44:01 AM #27 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon Nero Report 3

    Read the article

  • Fedora 17 keeps using fedora 16 kernel

    - by MTilsted
    I did run preupgrade to upgrade my Fedora 16(x64) to Fedora 17. And it seemed to work fine. So I got the new gimp 2.8, gcc 4.7.0 and so on. But the system keeps using the old kernel from fc16. Uname -a gives me: Linux localhost.localdomain 3.3.6-3.fc16.x86_64 #1 SMP Wed May 16 21:43:01 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux The system downloaded the new kernel, so I got /boot/vmlinuz-3.3.7-1.fc17.x86_64 /boot/System.map-3.3.7-1.fc17.x86_64 /boot/initramfs-3.3.7-1.fc17.x86_64.img /boot/config-3.3.7-1.fc17.x86_64 But the system keeps using the old kernel from fc16. If i look at my /boot/grub2/grub.cfg file, it looks like this: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub2-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } set timeout=5 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Fedora (3.3.6-3.fc16.x86_64)' --class fedora --class gnu-linux --class gnu --class os { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root 3521a578-5829-4fb4-a485-8c097df77d07 echo 'Loading Fedora (3.3.6-3.fc16.x86_64)' linux /vmlinuz-3.3.6-3.fc16.x86_64 root=UUID=57459a16-97a0-46a4-8e71-cc3ec0ca4a3e ro KEYTABLE=dvorak rd.lvm=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb rd.md.uuid=60956781:734d95ba:424311e2:796702a7 rd.luks=0 LANG=en_US.UTF-8 echo 'Loading initial ramdisk ...' initrd /initramfs-3.3.6-3.fc16.x86_64.img } menuentry 'Fedora (3.3.5-2.fc16.x86_64)' --class fedora --class gnu-linux --class gnu --class os { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root 3521a578-5829-4fb4-a485-8c097df77d07 echo 'Loading Fedora (3.3.5-2.fc16.x86_64)' linux /vmlinuz-3.3.5-2.fc16.x86_64 root=UUID=57459a16-97a0-46a4-8e71-cc3ec0ca4a3e ro KEYTABLE=dvorak rd.lvm=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb rd.md.uuid=60956781:734d95ba:424311e2:796702a7 rd.luks=0 LANG=en_US.UTF-8 echo 'Loading initial ramdisk ...' initrd /initramfs-3.3.5-2.fc16.x86_64.img } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### ### BEGIN /etc/grub.d/90_persistent ### ### END /etc/grub.d/90_persistent ### Anyone got a clue about why it still only references the fc16 kernel, and how I can upgrade it. My system is using raid1 on 2 disks, but /boot is not using raid. Mount for /boot is: /dev/sda2 on /boot type ext2 (rw,relatime,seclabel,user_xattr,acl,barrier=1) And / (The only other filesystem I have) is mounted as /dev/md0 on / type ext4 (rw,relatime,seclabel,user_xattr,acl,barrier=1,data=ordered)

    Read the article

  • Dhcpd Daemon is trying to lease itself?

    - by tommieb75
    I have a Slackware Linux 13.0 box with two interfaces, eth0 and eth1. I have set this box up to be on the 192.168.1.0/24 network, with subnet mask of 255.255.255.0. I am trying to run a dhcpd server on this box to service two interfaces above, so I subnetted the 192.168.1.0/24 network into two subnets. For eth0 192.168.1.1, subnet mask 255.255.255.128, broadcast mask 192.168.1.127. For eth1 192.168.1.129, subnet mask 255.255.255.128, broadcast mask 192.168.1.255. Both the interfaces are assigned manually. eth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.1.1 Bcast:192.168.1.127 Mask:255.255.255.128 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:39 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:1404 (1.3 KiB) Interrupt:11 Base address:0x8000 Memory:faffc000-faffcfff eth1 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.1.128 Bcast:192.168.1.255 Mask:255.255.255.128 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10003 errors:0 dropped:0 overruns:0 frame:0 TX packets:13286 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1589229 (1.5 MiB) TX bytes:9900005 (9.4 MiB) Interrupt:11 Here is the dhcpd.conf set up authoritative; ddns-update-style interim; ignore client-updates; subnet 192.168.1.0 netmask 255.255.255.128 { range 192.168.1.2 192.168.1.126; default-lease-time 86400; max-lease-time 86400; option routers 192.168.1.1; option ip-forwarding off; option domain-name-servers 208.67.222.222, 208.67.220.220; option broadcast-address 192.168.1.127; option subnet-mask 255.255.255.128; } subnet 192.168.1.128 netmask 255.255.255.128 { range 192.168.1.129 192.168.1.254; default-lease-time 86400; max-lease-time 86400; option routers 192.168.1.1; option ip-forwarding off; option domain-name-servers 208.67.222.222, 208.67.220.220; option broadcast-address 192.168.1.255; option subnet-mask 255.255.255.128; } This is what is showing in the log Apr 10 18:09:58 inspiron8600 dhcpd: DHCPDISCOVER from 00:00:00:00:00:00 (inspiron8600) via eth1 Apr 10 18:09:58 inspiron8600 dhcpd: DHCPOFFER on 192.168.1.131 to 00:00:00:00:00:00 (inspiron8600) via eth1 Apr 10 18:10:01 inspiron8600 dhcpcd[3832]: eth1: adding IP address 169.254.153.6/16 This is happening spuriously, and the log gets filled up with nonsense..so my question is this: How do I stop this from happening? And why would it be trying to give itself a lease? I am sure I have missed something but cannot see it and would appreciate a pair of eyes from the community to spot the obvious flaw!

    Read the article

  • Blank black screen with cursor after login -- RHEL5

    - by Sean O.
    I have a RHEL 5 machine here which is a Dell Precision T3500. I'm an Ubuntu guy, but I'm having a heck of a time with this machine. After processing its first security update, we cannot log in via the gdm greeter. A new kernel was installed; then I installed the nVidia drivers for our Quadro NVS 295. I know the X configuration is valid because the gdm greeter does display; however, upon login all we can get is a blank, black screen with a cursor. I thought perhaps our python installation was corrupted but a reinstall via yum has not helped. I have searched & googled extensively for a potential fix for this and can find nothing. Below are outputs from uname, a tail of an error in /var/log/messages, and the Xorg.conf. Can anyone suggest a course of action? [sean@cheetah ~]$ uname -a Linux cheetah.*.* 2.6.18-308.8.1.el5 #1 SMP Fri May 4 16:43:02 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux [sean@cheetah ~]$ sudo tail /var/log/messages Jun 5 15:03:04 cheetah gconfd (sean-4592): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 5 15:03:05 cheetah hcid[3855]: Default passkey agent (:1.8, /org/bluez/applet) registered Jun 5 15:03:05 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:03:05 cheetah last message repeated 2 times Jun 5 15:03:06 cheetah gconfd (sean-4592): Resolved address "xml:readwrite:/home/sean/.gconf" to a writable configuration source at position 0 Jun 5 15:03:06 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:07 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:08 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:07:01 cheetah ntpd[4114]: synchronized to 64.16.211.38, stratum 3 Jun 5 15:07:01 cheetah ntpd[4114]: kernel time sync enabled 0001 [sean@cheetah ~]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012 # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • windows 2003 server : can't join domain

    - by phill
    I originally tried to rejoin a computer to a network which led to a "cannot find domain" error. The username/password box don't even come up. some tests i ran: I can ping the server, however I can't ping the domain name domain1.local. nslookup can't find the domain either. It looks to the isp's dns instead of my own to resolve the local machines. So i go to the dns and run netdiag.exe and gives me this error. DNS test . . . . . . . . . . . . . : Failed [WARNING] Cannot find a primary authoritative DNS server for the name 'stmartinsrv.stmartin.local.'. [RCODE_SERVER_FAILURE] The name 'srv.domain1.local.' may not be registered in DNS. [WARNING] The DNS entries for this DC are not registered correctly on DNS se rver '68.94.156.1'. Please wait for 30 minutes for DNS server replication. [WARNING] The DNS entries for this DC are not registered correctly on DNS se rver '68.94.157.1'. Please wait for 30 minutes for DNS server replication. [FATAL] No DNS servers have the DNS records for this DC registered. Redir and Browser test . . . . . . : Passed List of NetBt transports currently bound to the Redir NetBT_Tcpip_{04BB0F6B-06AE-4D60-80C8-2A7A24C1D87B} The redir is bound to 1 NetBt transport. List of NetBt transports currently bound to the browser NetBT_Tcpip_{04BB0F6B-06AE-4D60-80C8-2A7A24C1D87B} The browser is bound to 1 NetBt transport. then running dcdiag C:\Program Files\Support Toolsdcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SRV Starting test: Connectivity The host 1c99f63c-49ec-40db-b3d3-6265c00fbd3e._msdcs.domain1.local cou ld not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (1c99f63c-49ec-40db-b3d3-6265c00fbd3e._msdcs.domain1.local) couldn't be resolved, the server name (srv.domain1.local) resolved to the IP address (192.168.1.21) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... SRV failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SRV Skipping all tests, because server SRV is not responding to directory service requests Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : domain1 Starting test: CrossRefValidation ......................... domain1 passed test CrossRefValidation Starting test: CheckSDRefDom ......................... domain1 passed test CheckSDRefDom Running enterprise tests on : domain1.local Starting test: Intersite ......................... domain1.local passed test Intersite Starting test: FsmoCheck ......................... domain1.local passed test FsmoCheck from previous postings, I've tried adding the domain suffix to the nic ip properties to both the client machine and the dc server which didn't help. note: there is only one nic on the server any ideas? thanks in advance

    Read the article

  • How do I get my ubuntu server to listen for database connections?

    - by Bob Flemming
    I am having a problems connecting to my database outside of phpmyadmin. Im pretty sure this is because my server isn't listening on port 3306. When I type: sudo netstat -ntlp on my OTHER working server I can see the following line: tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 20445/mysqld However, this line does not appear on the server I am having difficulty with. How do I make my sever listen for mysql connections? Here my my.conf file: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql #skip-networking=off #skip_networking=off #skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 0.0.0.0 # # * Fine Tuning # key_buffer = 64M max_allowed_packet = 64M thread_stack = 650K thread_cache_size = 32 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 2M query_cache_size = 32M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

    Read the article

  • What Apache/PHP configurations do you know and how good are they?

    - by FractalizeR
    Hello. I wanted to ask you about PHP/Apache configuration methods you know, their pros and cons. I will start myself: ---------------- PHP as Apache module---------------- Pros: good speed since you don't need to start exe every time especially in mpm-worker mode. You can also use various PHP accelerators in this mode like APC or eAccelerator. Cons: if you are running apache in mpm-worker mode, you may face stability issues because every glitch in any php script will lead to unstability to the whole thread pool of that apache process. Also in this mode all scripts are executed on behalf of apache user. This is bad for security. mpm-worker configuration requires PHP compiled in thread-safe mode. At least CentOS and RedHat default repositories doesn't have thread-safe PHP version so on these OSes you need to compile at least PHP yourself (there is a way to activate worker mpm on Apache). The use of thread-safe PHP binaries is considered experimental and unstable. Plus, many PHP extensions does not support thread-safe mode or were not well-tested in thread-safe mode. ---------------- PHP as CGI ---------------- This seems to be the slowest default configuration which seems to be a "con" itself ;) ---------------- PHP as CGI via mod_suphp ---------------- Pros: suphp allows you to execute php scipts on behalf of the script file owner. This way you can securely separate different sites on the same machine. Also, suphp allows to use different php.ini files per virtual host. Cons: PHP in CGI mode means less performance. In this mode you can't use php accelerators like APC because each time new process is spawned to handle script rendering the cache of previous process useless. BTW, do you know the way to apply some accelerator in this config? I heard something about using shm for php bytecode cache. Also, you cannot configure PHP via .htaccess files in this mode. You will need to install PECL htscanner for this if you need to set various per-script options via .htaccess (php_value / php_flag directives) ---------------- PHP as CGI via suexec ---------------- This configuration looks the same as with suphp, but I heard, that it's slower and less safe. Almost same pros and cons apply. ---------------- PHP as FastCGI ---------------- Pros: FastCGI standard allows single php process to handle several scripts before php process is killed. This way you gain performance since no need to spin up new php process for each script. You can also use PHP accelerators in this configuration (see cons section for comment). Also, FCGI almost like suphp also allows php processes to be executed on behalf of some user. mod_fcgid seems to have the most complete fcgi support and flexibility for apache. Cons: The use of php accelerator in fastcgi mode will lead to high memory consumption because each PHP process will have his own bytecode cache (unless there is some accelerator that can use shared memory for bytecode cache. Is there such?). FastCGI is also a little bit complex to configure. You need to create various configuration files and make some configuration modifications. It seems, that fastcgi is the most stable, secure, fast and flexible PHP configuration, however, a bit difficult to be configured. But, may be, I missed something? Comments are welcome!

    Read the article

  • http.conf setup to simplify using 'localhost:81'

    - by Will
    I'm installing portable wampserver within my dropbox folder so I can access anywhere. I have this achieved and accessible using http://locahost:81 I want to access it by using a different address (dropping the :81 port number) such as http://myothersite. I'm fairly certain I need to add a virtualhosts directove somewhere within this, but I am not Apache experienced! This is the current Apache httpd.conf file: ServerRoot "C:/Users/will/Dropbox/Wampee-2.1-beta-2/bin/apache/apache2.2.17" Listen 81 ServerAdmin admin@localhost ServerName localhost:81 DocumentRoot "C:/Users/will/Dropbox/Wampee-2.1-beta-2/www/" <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "C:/Users/will/Dropbox/Wampee-2.1-beta-2/www/"> Options Indexes FollowSymLinks AllowOverride all # onlineoffline tag - don't remove Order Deny,Allow Deny from all Allow from 127.0.0.1 </Directory> <IfModule dir_module> DirectoryIndex index.php index.php3 index.html index.htm </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> ErrorLog "C:/Users/will/Dropbox/Wampee-2.1-beta-2/logs/apache_error.log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "C:/Users/will/Dropbox/Wampee-2.1-beta-2/logs/access.log" common #CustomLog "logs/access.log" combined </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "cgi-bin/" </IfModule> <IfModule cgid_module> #Scriptsock logs/cgisock </IfModule> <Directory "cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-httpd-php .php AddType application/x-httpd-php .php3 </IfModule> # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts #Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include "C:/Users/will/Dropbox/Wampee-2.1-beta-2/alias/*" Include "C:/Users/will/Dropbox/Wampee-2.1-beta-2/MyWebAp ps/etc/alias/*"

    Read the article

  • Consistent PHP _SERVER variables between Apache and nginx?

    - by Alix Axel
    I'm not sure if this should be asked here or on ServerFault, but here it goes... I am trying to get started on nginx with PHP-FPM, but I noticed that the server block setup I currently have (gathered from several guides including the nginx Pitfalls wiki page) produces $_SERVER variables that are different from what I'm used to seeing in Apache setups. After spending the last evening trying to "fix" this, I decided to install Apache on my local computer and gather the variables that I'm interested in under different conditions so that I could try and mimic them on nginx. The Apache setup I've on my computer has only one mod_rewrite rule: RewriteEngine On RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^(.*)$ /index.php/$1 [L] And these are the values I get for different request URIs (left is Apache, right is nginx): localhost/ - http://www.mergely.com/GnzBHRV1/ localhost/foo/bar/baz/?foo=bar - http://www.mergely.com/VwsT8oTf/ localhost/index.php/foo/bar/baz/?foo=bar - http://www.mergely.com/VGEFehfT/ What configuration directives would allow me to get similar values on requests handled by nginx? My current configuration in nginx is: server { listen 80; listen 443 ssl; server_name default; ssl_certificate /etc/nginx/certificates/dummy.crt; ssl_certificate_key /etc/nginx/certificates/dummy.key; root /var/www/default/html; index index.php index.html; autoindex on; location / { try_files $uri $uri/ /index.php; } location ~ /(?:favicon[.]ico|robots[.]txt)$ { log_not_found off; } location ~* [.]php { #try_files $uri =404; include fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_split_path_info ^(.+[.]php)(/.+)$; } location ~* [.]ht { deny all; } } And my fastcgi_params file looks like this: fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $https; I know that the try_files $uri =404; directive is commented and that it is a security vulnerability but, if I uncomment it, the third request (localhost/index.php/foo/bar/baz/?foo=bar) will return a 404. It's also worth noting that my PHP cgi.fix_pathinfo in On (contrary to what some of the guides recommend), if I try to set it to Off, I'm presented with a "Access denied." message on every PHP request. I'm running PHP 5.4.8 and nginx/1.1.19. I don't know what else to try... Help?

    Read the article

< Previous Page | 519 520 521 522 523 524 525 526 527 528 529 530  | Next Page >