Search Results

Search found 37539 results on 1502 pages for 'google friend connect'.

Page 525/1502 | < Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >

• Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

  - by ubunsteve

  I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

  Read the article

• Linux - How to run Firefox with AT command

  - by conualfy

  I try to run a specified command on a desired time. I found at for this, and it seems to work fine if I run: echo "ls -al / > /home/florin/test.txt" | at 4:21am But I want to run a different thing: /usr/bin/firefox -new-tab http://google.ro I tried adapting the first line with my action (running it in terminal opens a new Firefox tab with http://google.ro, so the command is correct), but with at, it does not work: echo "firefox -new-tab http://google.ro" | at 4:23am The task seems to be scheduled, but it does not run. When running the previous line I get the default reply from at: warning: commands will be executed using /bin/sh Should my Firefox command be differently run in sh? Is there a way to do my action with at, or some other way? Thanks a lot!

  Read the article

• SFTP through proxy

  - by aerodynamic_props

  I have a large amount of data on scratch space at computer b that I want to get. In my network I cannot directly connect to computer b (ssh exits with "No route to host"); I must first connect to computer a, and then connect to computer b. I cannot move the data from the scratch space on computer b to computer a because of a disk quota that is imposed on me at computer a. How can I move the data from computer b to my computer in this situation?

  Read the article

• How to limit access to Exchange 2003 Mobile Activesync server by user?

  - by micilin

  So I was asked to set up an Exchange Activesync mobile gateway. That's done. It's a separat eExchange 2003 front-end server configured for SSL, and I've put an off-domain ISA server in front of it. Now I'm being asked to limit which users can connect to it. By default an Exchange front-end server allows any user who has a mail account to connect to the front -end server. So I'm looking at the permissions on the various IIS sites/apps on the server, but I know that it's easy to break Exchange Front-end server perms. So I've got the following in IIS: Exadmin Exchange EchWeb Microsoft-SErver-ActiveSync MobileAdmin OMA And a couple of others that I dont think are relevant. Can I change the permissions on one of these to restrict who can connect to Activesync? As a bonus: Can I do it in a way that does not affect ordinary browser based Exchange Access? Thanks in Advance!!

  Read the article

• ldirectord refusing connection when nginx redirects from http to https

  - by Adam

  I am running ldirector as a load balancer to an nginx front end server. If I setup a redirect from http to https and connect directly to the nginx server, all is well. Connecting via ldirector causes my connection to be refused. I can connect normally via http or https through ldirector when I don't have the redirect in place. To add to my confusion, if my application issues a redirect from http to https, it works. I am testing this via curl on the command line. (curl: (7) couldn't connect to host vs a response) I am using the standard ldirectord config (http://www.ultramonkey.org/3/topologies/config/lb/non-fwmark/linux-director/ldirectord.cf) the http and https parts. My nginx config for the redirect is simply: location / { rewrite ^(.*) https://$host$1 permanent; }

  Read the article

• How to send a batch file by email

  - by MikeL

  Trying to send a batch file as an email attachment, I get the following error: mx.google.com rejected your message to the following e-mail addresses: [email protected] mx.google.com gave this error: Our system detected an illegal attachment on your message. Please visit http://support.google.com/mail/bin/answer.py?answer=6590 to review our attachment guidelines. q42si10198525wei.6 Your message wasn't delivered because the recipient's e-mail provider rejected it. This also happens if I place the batch file in a .zip archive. I need to send a batch file to everyone at my company for them to run, preferably without having to change file extensions first. Is this possible by email?

  Read the article

• Can't reach custom C# forms application remotely.

  - by gnucom

  Hello, I'm working in Windows Server 2008. I have a very basic C# forms application (not a service) that is listening on a port, say 56112. When using telnet I can connect from the localhost and send and receive data. For some reason I cannot remotely connect to the application. I know I have a connection because I can telnet to 23 on the remotely fine. I've opened this port on the firewall, created rules in/out in advanced firewall, disabled the firewall completely, and more. Any suggestions would be great! This is the telnet output: Microsoft Telnet> open server.cc 56112 Connecting server.cc...Could not open connection to the host, on port 56112: Connect failed

  Read the article

• Graph data structures and journal format for mini-IDE

  - by matec

  Background: I am writing a small/partial IDE. Code is internally converted/parsed into a graph data structure (for fast navigation, syntax-check etc). Functionality to undo/redo (also between sessions) and restoring from crash is implemented by writing to and reading from journal. The journal records modifications to the graph (not to the source). Question: I am hoping for advice on a decision on data-structures and journal format. For the graph I see two possible versions: g-a Graph edges are implemented in the way that one node stores references to other nodes via memory address g-b Every node has an ID. There is an ID-to-memory-address map. Graph uses IDs (instead of addresses) to connect nodes. Moving along an edge from one node to another each time requires lookup in ID-to-address map. And also for the journal: j-a There is a current node (like current working directory in a shell + file-system setting). The journal contains entries like "create new node and connect to current", "connect first child of current node" (relative IDs) j-b Journal uses absolute IDs, e.g. "delete edge 7 - 5", "delete node 5" I could e.g. combine g-a with j-a or combine g-b with j-b. In principle also g-b and j-a should be possible. [My first/original attempt was g-a and a version of j-b that uses addresses, but that turned out to cause severe restrictions: nodes cannot change their addresses (or journal would have to keep track of it), and using journal between two sessions is a mess (or even impossible)] I wonder if variant a or variant b or a combination would be a good idea, what advantages and disadvantages they would have and especially if some variant might be causing troubles later.

  Read the article

• Trouble with resolving hostnames on CentOS using Bind

  - by cabaret

  I'm taking a course on server administration at school and I have managed to set up virtual hosting in apache and a dns server on a virtual machine. However, I have now set up an old pc to run CentOS and I'm trying the same on that box. The problem I ran into now is that I can't resolve hostnames from the linux box. I have set up the nameserver in /etc/resolv.conf to the IP of the CentOS machine, but when I try for example ping google.com I get ping: unknown host google.com However, when I do ping 66.102.13.105 (which is the Google IP, figured that out by pinging on my mac) I get: PING 66.102.13.105 (66.102.13.105) 56(84) bytes of data. 64 bytes from 66.102.13.105: icmp_seq=1 ttl=52 time=15.5 ms Slightly confused why this is happening. Could it be because of my router sitting in between the linux machine and the cable modem? It's a D-Link somethingsomething. Thanks in advance

  Read the article

• XAMPP MySQL stops running after ~1.5 seconds

  - by Nona Urbiz

  I have tried installing it as a service. Nothing seems to work! I have checked the status page and MySQL is listed as "Deactivated". When trying to open phpMyAdmin I get: Error MySQL said: Documentation #1045 - Access denied for user 'root'@'localhost' (using password: NO) Connection for controluser as defined in your configuration failed. phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server. and from the CD demo: Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'root'@'localhost' (using password: NO) in C:\xampp\htdocs\xampp\cds.php on line 77 Could not connect to database! Is MySQL running or did you change the password?        Thanks for any suggestions or help you can give!

  Read the article

• How to show disconnect network drives

  - by Jake

  Windows 7 and Vista laptops in my company domain has network drives set up by Win2k8 Server GPO. Normally, when the laptops has ethernet cable plugged in before boot, the network drives connect and appear as expected at the end of startup sequence. However, when the laptop has ethernet cable unplugged, the network drives are not connected, which is fine, but the disconnected icons disappear as well. i.e. the drives are not set up. At the end of the startup sequence, upon reaching desktop, the wireless adapters will connect to the network and the laptop will be able to find the network drive. Hence I want the drives to be setup nonetheless, so that the next attempt to connect, say, via a desktop shortcut, will reestablish the network drive connection. How can this be done?

  Read the article

• Sudden loss of Wi-Fi connectivity on OS X

  - by GJ.

  Occasionally while I work, without any special provocation, I lose connectivity via Wi-Fi. Other devices connected to the same wifi network have no interruption, and the problem gets resolved once I reboot my MacBook Air, so it's definitely a local problem. Observations: The Wi-Fi symbol in the menu indicates that I'm still connected, but apps can't actually connect neither to the Internet nor to other devices in the LAN. I can't connect to an alternate Wi-Fi network (e.g. Wi-Fi tethering via iPhone). I can connect to the Internet via iPhone USB tethering but this seems to only work some of the time. Only a reboot solves the problem but a regular restart gets stuck on a grey screen with rotating wheel (after all applications have closed) and I have to do a hard reset. How should I go about troubleshooting this? It used to happen very rarely but now is becoming more frequent (approaching once every 2-3 days on average).

  Read the article

• Cannot Enter Repro Admin Web Interface at Port 5080

  - by aqua

  I have followed the instructions on this website www.rtcquickstart.org to set up my firewall, DNS settings, TLS, and have installed the TURN server and repro proxy as instructed, and have restarted repro. However, I am not able to access the web interface of repro on port 5080, either at localhost:5080 / 127.0.0.1:5080 or at the server's IP address: IPADDRESS:5080 (I have set the server's IP for binding in repro.config). I get the browser error message: 'Unable to connect to server' whenever trying to connect to the web interface via port 5080. I initially had Apache2 installed, which loaded pages correctly at port 80 / address root, and when checked it 'listened' at port 5080 after it was configured in /etc/apache2/ports.conf, however the repro web interface still did not work at port 5080. I have tried uninstalling Apache2 in case that was conflicting with repro's web server, but the problem persists, and testing port 5080 now shows that nothing is 'listening' on port 5080. I have tried reinstalling / purging repro but it has not helped. My router is correctly set to allow all ports; port 5080 is open and forwarding correctly. I can connect to the internet and ping all websites through the server and everything else is working correctly. I would be gateful if anyone could offer advice on how to solve this problem.

  Read the article

• What payment gateways do real customers really use when given the choice?

  - by ??????

  I would like to give customers the option of paying however they can whether that be through a proper gateway (e.g. SagePay) or through something else such as PayPal, Amazon Checkout or Google Checkout. Personally I have not bought anything through the Amazon Checkout except for on Amazon.co.uk and my PayPal buys have been limited. As for Google Checkout I have no idea what that is or how it works from a consumer perspective. I understand that people buying from smaller sites are happier to pay by PayPal as they have an account already and trust PayPal. As for Amazon Payments and Google Checkout, do people actually use them if given the choice? There are a lot of people on Kindles these days, happy to buy stuff via Amazon on their Kindle. Would Amazon Payments make sense to this growing crowd? With too many payment gateways on offer it might be confusing at the checkout. Does anyone know if this is a problem for genuine customers? I also have not seen many 'pay by Amazon Payments' icons on websites (you see PayPal all the time). Does advertising the fact that you can pay by Amazon Payments increase sales, e.g. to Kindle owners that have a nebulous book-buying account that 'their other half doesn't know about'?

  Read the article

• How to get Wifi Working Properly - I am Noob

  - by user287853

  I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

  Read the article

• FTP Connection established...Connection timed out problem with all my sites and FTP programs?

  - by janoChen

  Just few hours ago FileZilla was working fine. Then, suddenly I started to get this error: Status: Resolving address of ftp.readtypechinese.com Status: Connecting to 69.175.14.60:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server And it happens with all my sites: Status: Resolving address of edasich.dreamhost.com Status: Connecting to 173.236.223.223:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server I'm using FileZilla 3.5.0 and Ubuntu 11.10. Any suggestions to fix this? (I already tried Passive mode and it doesn't work). EDIT: Ocasionally, the log goes beyond the ...waiting for welcome message: Status: Connection established, waiting for welcome message... Response: 220 DreamHost FTP Server Command: USER aleche23 Error: Connection timed out Error: Could not connect to server But the connection gets timed out again. Weird...I just realized that I have the same problems with other FTP programs too: gFTP: Looking up ftp.readtypechinese.com Trying readtypechinese.com:21 Connected to readtypechinese.com:21 220 ProFTPD 1.3.2 Server (server) [69.175.14.60] USER [email protected] Connection to ftp.readtypechinese.com timed out

  Read the article

• Connected to wireless, but no internet access

  - by boogaloo

  After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

  Read the article

• Remote desktop connection drops before login can appear

  - by Keatly

  Hi Everyone, Someone asked this question a few months ago and I have the exact same problem. I have tried all of the suggested solutions in the other posting (in particular reinstalling the video card on the server), but have not had any luck. I have gone through this troubleshooting guide in detail with no results: http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html I have a client with Remote Desktop enabled that I can't connect to in our local network. When I enter in the machine ip/port in the connect box and hit Connect, it briefly gives the normal "Connecting..." dialog box. However, after 2 seconds it just drops. No error message, nothing. Just disappears as if nothing was happening. •Windows XP SP3 •Windows firewall is open for 3389TCP •Machine is on a domain •RDP is enabled in My Computer •User is a local admin I have loads of other machines on the same domain with the same GPO that work fine. Any ideas?

  Read the article

• How to browse to a webserver which is reachable through the SSH port only

  - by GetFree

  I have a server at work which is behind a firewall (the company's firewall) so it is reachable only thrugh port 22 (SSH). I'm able to connect to the server with putty without problems. Also, that server has Apache running and listening on port 80 as usual. But I cant connect to the website using my browser since port 80 (and everyone else) is blocked by the company's firewall. Is there a way I can make my browser to connect to Apache in that server so I can browse the site I'm working on? Thanks.

  Read the article

• running adb via wifi on ubuntu 13.04

  - by Blaze Tama

  First, im new on linux so please bear with me. I have a rooted android phone and i was able to run the adb via wifi network on windows, where i just need to go to the adb's directory and type adb connect. However, i can't just do that in my ubuntu. Everytime i enter adb connect, the terminal always said that i dont have the adb and i must install it. When i check the ADT Bundle (I downloaded the bundled one from here), i can see the adb is there inside the platform-tools folder. I already tried to change the directory to the platform-tools and run the adb connect from there, but its still not working. Do i need to install the adb again via terminal? Or did i miss something? You may be wondering why dont i just download the adb (again) via terminal and do trial and error? The answer is because i dont have a good internet connection, so i want to avoid unnecessary downloads. Thanks for your time :D

  Read the article

• Internet slow on one router only [the problem only in Ubuntu] [on hold]

  - by mrSuperEvening

  Internet works perfectly on every other router, but browsing sucks at home (slow browsing and slow loading times). I changed DNS servers to 8.8.0.0, still doesn't help. And funnily, download speed is extremely high on this network (meaning torrents for example), but using browsers and loading websites is extremely slow (only on this network). Do I need to change something in router settings or what can I try? By the way, I use wired connection to router. EDIT: There's no problems when using Windows. EDIT: ifconfig: eth0 Link encap:Ethernet HWaddr f2:4d:a0:c0:3f:4c inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fec6:3f4c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:206798 errors:0 dropped:0 overruns:0 frame:0 TX packets:219570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76680734 (76.6 MB) TX bytes:21738160 (21.7 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11094 (11.0 KB) TX bytes:11094 (11.0 KB)` ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (213.159.32.147) 56(84) bytes of data. 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=1 ttl=61 time=0.936 ms 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=2 ttl=61 time=0.937 ms --- google.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 0.936/0.936/0.937/0.030 ms

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• Connecting server to more than one switch.

  - by Jake

  I have 3 switches, one NEATGEAR GS748T and two JGS524. Initially I wanted to connect them in a triangle loop, but later suspect that the JG524 does not have spanning tree support. Now I have a Dell R710 with 2 NIC at the back. If I connect the server in between the two JGS524, which both in turn connect to the GS748T, will that consitute a loop? According to my limited understanding, with 2 NICs there will be 2 IPs for the server. Will the file server even work or not? Theoretically speaking, will this configuration increase the access speeds for clients? Thanks.

  Read the article

• PHP5 giving failed to open stream: HTTP request failed error when using fopen.

  - by mickey

  Hello everyone. This problem seems to have been discussed in the past everywhere on google and here, but I have yet to find a solution. A very simple fopen gives me a PHP Warning: fopen(http://www.google.ca): failed to open stream: HTTP request failed!". The URL I am fetching have no importance because even when I fetch http://www.google.com it doesnt work. The exact same script works on different server. The one failing is Ubuntu 10.04 and PHP 5.3.2. This is not a problem in my script, it's something different in my server or it might be a bug in PHP. I have tried using a user_agent in php.ini but no success. My allow_url_fopen is set to On. If you have any ideas, feel free!

  Read the article

• unable to send mail from postfix on Ubuntu 12.04

  - by gilmad

  I'm trying to send an email through Google from my localhost. (via PHP5.3) But Google keeps on blocking my requests. I tried to follow the solutions given to a few similar questions, but for some reason they do not work. I followed these instructions to configure it - http://www.dnsexit.com/support/mailrelay/postfix.html Now for the config data: my main.cf file looks like that: relayhost = [smtp.gmail.com]:587 smtp_fallback_relay = [relay.google.com] smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = my sasl_passwd looks like that: [smtp.gmail.com]:587 [email protected]:password and that is how the mail.log rows look like: Dec 14 10:24:50 COMP-NAME postfix/pickup[5185]: 1C3987E0EDD: uid=33 from= Dec 14 10:24:50 COMP-NAME postfix/cleanup[5499]: 1C3987E0EDD: message-id=<[email protected] Dec 14 10:24:50 COMP-NAME postfix/qmgr[5186]: 1C3987E0EDD: from=, size=483, nrcpt=1 (queue active) Dec 14 10:24:50 COMP-NAME postfix/smtp[5501]: 1C3987E0EDD: to=, relay=smtp.gmail.com[173.194.70.109]:587, delay=0.61, delays=0.19/0/0.32/0.1, dsn=5.7.0, status=bounced (host smtp.gmail.com[173.194.70.109] said: 530 5.7.0 Must issue a STARTTLS command first. w3sm8024250eel.17 (in reply to MAIL FROM command)) Dec 14 10:24:50 COMP-NAME postfix/cleanup[5499]: C20677E0EDE: message-id=<[email protected] Dec 14 10:24:50 COMP-NAME postfix/bounce[5502]: 1C3987E0EDD: sender non-delivery notification: C20677E0EDE Dec 14 10:24:50 COMP-NAME postfix/qmgr[5186]: C20677E0EDE: from=<, size=2532, nrcpt=1 (queue active) Dec 14 10:24:50 COMP-NAME postfix/qmgr[5186]: 1C3987E0EDD: removed

  Read the article

< Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >