Search Results

Search found 17013 results on 681 pages for 'hard coding'.

Page 525/681 | < Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >

  • Come up with a real-world problem in which only the best solution will do (a problem from Introduction to algorithms) [closed]

    - by Mike
    EDITED (I realized that the question certainly needs a context) The problem 1.1-5 in the book of Thomas Cormen et al Introduction to algorithms is: "Come up with a real-world problem in which only the best solution will do. Then come up with one in which a solution that is “approximately” the best is good enough." I'm interested in its first statement. And (from my understanding) it is asked to name a real-world problem where only the exact solution will work as opposed to a real-world problem where good-enough solution will be ok. So what is the difference between the exact and good enough solution. Consider some physics problem for example the simulation of the fulid flow in the permeable medium. To make this simulation happen some simplyfing assumptions have to be made when deriving a mathematical model. Otherwise the model becomes at least complex and unsolvable. Virtually any particle in the universe has its influence on the fluid flow. But not all particles are equal. Those that form the permeable medium are much more influental than the ones located light years away. Then when the mathematical model needs to be solved an exact solution can rarely be found unless the mathematical model is simple enough (wich probably means the model isn't close to reality). We take an approximate numerical method and after hours of coding and days of verification come up with the program or algorithm which is a solution. And if the model and an algorithm give results close to a real problem by some degree that is good enough soultion. Its worth noting the difference between exact solution algorithm and exact computation result. When considering real-world problems and real-world computation machines I believe all physical problems solutions where any calculations are taken can not be exact because universal physical constants are represented approximately in the computer. Any numbers are represented with the limited precision, at least limited by amount of memory available to computing machine. I can imagine plenty of problems where good-enough, good to some degree solution will work, like train scheduling, automated trading, satellite orbit calculation, health care expert systems. In that cases exact solutions can't be derived due to constraints on computation time, limitations in computer memory or due to the nature of problems. I googled this question and like what this guy suggests: there're kinds of mathematical problems that need exact solutions (little note here: because the question is taken from the book "Introduction to algorithms" the term "solution" means an algorithm or a program, which in this case gives exact answer on each input). But that's probably more of theoretical interest. So I would like to narrow down the question to: What are the real-world practical problems where only the best (exact) solution algorithm or program will do (but not the good-enough solution)? There are problems like breaking of cryptographic ciphers where only exact solution matters in practice and again in practice the process of deciphering without knowing a secret should take reasonable amount of time. Returning to the original question this is the problem where good-enough (fast-enough) solution will do there's no practical need in instant crack though it's desired. So the quality of "best" can be understood in any sense: exact, fastest, requiring least memory, having minimal possible network traffic etc. And still I want this question to be theoretical if possible. In a sense that there may be example of computer X that has limited resource R of amount Y where the best solution to problem P is the one that takes not more than available Y for inputs of size N*Y. But that's the problem of finding solution for P on computer X which is... well, good enough. My final thought that we live in a world where it is required from programming solutions to practical purposes to be good enough. In rare cases really very very good but still not the best ones. Isn't it? :) If it's not can you provide an example? Or can you name any such unsolved problem of practical interest?

    Read the article

  • Have You Visited the New Procurement Enhancement Request Community?

    - by LuciaC
    Have you visited the new Procurement Enhancement Request Community yet?  If not, we strongly encourage you to visit this site to vote on current Enhancement Requests (ERs) available through the ‘Quick Preview of Voting List’.  You can also vote on any ER currently displayed.  Have an ER that is not listed?  Simply add it by creating a thread stating the ER and any detailed information you would like to include.  If the ER already exists in the database, we will add the ER # to the thread so that development can provide updates around the requested ERs. This community is your one-stop source for all Enhancement information.  It is being monitored regularly by development and soon we will be posting some updates around some of the top voted Enhancement Requests.  Know that your vote counts!  By voting, you will bring forward those ERs that impact the Procurement Suite's value and usability.  Is your request industry specific?  Let us know by posting this information in the body of the thread.  We have a team monitoring these ERs and will be happy to highlight industry specific ERs to ensure they also get equal visibility! Coming Soon:  A list of the Top implemented ERs!  Development has been working hard to make improvements to the Procurement Suite of Products and they want you to know about them!  Until then, check out the Best Practices Section for some key ERs and how they can help your company secure the most value from your implementation!! What you need to know: The Procurement Enhancement Requests Community is your 1-stop shop for the latest information on Enhancements! The Community allows you to vote on ERs bringing visibility to the collective audience interest in value and usability recommendations. Your place to submit any new enhancement requests. Get the latest on top Procurement Enhancement Requests (ERs) - know when an improvement is PLANNED, COMING SOON, and DELIVERED. This Community is owned and managed by the Oracle Procurement Development team! Let your voice be heard by telling us what you want to see implemented in the Procurement Suite.

    Read the article

  • Delegates: A Practical Understanding

    - by samerpaul
    It's been a while since I have written on this blog, and I'm planning on reviving it this summer, since I have more time to do so again.I've also recently started working on the iPhone platform, so I haven't been as busy in .NET as before.In either case, today's blog post applies to both C# and Objective-C, because it's more about a practical understanding of delegates than it is about code. When I was learning coding, I felt like delegates was one of the hardest things to conceptually understand, and a lot of books don't really do a good job (in my opinion) of explaining it. So here's my stab at it.A Real Life Example of DelegatesLet's say there are three of you. You, your friend, and your brother. You're each in a different room in your house so you can't hear each other, even if you shout. 1)You are playing a computer game2) Friend is building a puzzle3) Brother is nappingNow, you three are going to stay in your room but you want to be informed if anything interesting is happening to the one of you. Let's say you (playing the computer game) want to know when your brother wakes up.You could keep walking to the room, checking to see if he's napping, and then walking back to your room. But that would waste a lot of time / resources, and what if you miss when he's awake before he goes back to sleep? That would be bad.Instead, you hand him a 2-way radio that works between your room and his room. And you inform him that when he wakes up, he should press a button on the radio and say "I'm awake". You are going to be listening to that radio, waiting for him to say he's awake. This, in essence, is how a delegate works.You're creating an "object" (the radio) that allows you to listen in on an event you specify. You don't want him to send any other messages to you right now, except when he wakes up. And you want to know immediately when he does, so you can go over to his room and say hi. (the methods that are called when a delegate event fires). You're also currently specifying that only you are listening on his radio.Let's say you want your friend to come into the room at the same time as you, and do something else entirely, like fluff your brother's pillow. You will then give him an identical radio, that also hooks into your brother's radio, and inform him to wait and listen for the "i'm awake" signal.Then, when your brother wakes up, he says "I'm awake!" and both you and your friend walk into the room. You say hi, and your friend fluffs the pillow, then you both exit.Later, if you decide you don't care to say hi anymore, you turn off your radio. Now, you have no idea when your brother is awake or not, because you aren't listening anymore.So again, you are each classes in this example, and each of you have your own methods. You're playing a computer game (PlayComputerGame()), your friend is building a puzzle (BuildPuzzle()) and your brother is napping (Napping()). You create a delegate (ImAwake) that you set your brother to do, when he wakes up. You listen in on that delegate (giving yourself a radio and turning it on), and when you receive the message, you fire a new method called SayHi()). Your friend is also wired up to the same delegate (using an identical radio) and fires the method FluffPillow().Hopefully this makes sense, and helps shed some light on how delegates operate. Let me know! Feel free to drop me a line at Twitter (preferred method of contact) here: samerabousalbi

    Read the article

  • reference list for non-IT driven algorithmic patterns

    - by Quicker
    I am looking for a reference list for non-IT driven algorithmic patterns (which still can be helped with IT implementations of IT). An Example List would be: name; short desc; reference Travelling Salesman; find the shortest possible route on a multiple target path; http://en.wikipedia.org/wiki/Travelling_salesman_problem Ressource Disposition (aka Regulation); Distribute a limited/exceeding input on a given number output receivers based on distribution rules; http://database-programmer.blogspot.de/2010/12/critical-analysis-of-algorithm-sproc.html If there is no such list, but you instantly think of something specific, please 'put it on the desk'. Maybe I can compile something out of the input I get here (actually I am very frustrated as I did not find any such list via research by myself). Details on Scoping: I found it very hard to formulate what I want in a way everything is out that I do not need (which may be the issue why I did not find anything at google). There is a database centric definition for what I am looking for in the section 'Processes' of the second example link. That somehow fits, but the database focus sort of drifts away from the pattern thinking, which I have in mind. So here are my own thoughts around what's in and what's out: I am NOT looking for a foundational algo ref list, which is implemented as basis for any programming language. Eg. the php reference describes substr and strlen. That implements algos, but is not what I am looking for. the problem the algo does address would even exist, if there were no computers (or other IT components) the main focus of the algo is NOT to help other algo's chances are high, that there are implementions of the solution or any workaround without any IT support out there in the world however the algo could be benefitialy implemented/fully supported by a software application = means: the problem of the algo has to be addressed anyway, but running an algo implementation with software automates the process (that is why I posted it on stackoverflow and not somewhere else) typically such algo implementations have more than one input field value and more than one output field value - which implies it could not be implemented as simple function (which is fixed to produce not more than one output value) in a normalized data model often times such algo implementation outputs span accross multiple rows (sometimes multiple tables), whereby the number of output rows depends on the input paraters and rows in the table(s) at start time - which implies that any algo implementation/procedure must interact with a database (read and/or write) I am mainly looking for patterns, not for specific implementations. Example: The Travelling Salesman assumes any coordinates, however it does not say: You need a table targets with fields x and y. - however sometimes descriptions are focussed on examples with specific implementations very much - no worries, as long as the pattern gets clear

    Read the article

  • What is hiberfil.sys and How Do I Delete It?

    - by The Geek
    You’re no doubt reading this article because there’s a gigantic hiberfil.sys file sitting in the root of your drive, and you want to get rid of it to free up some space… but you can’t! Luckily, you actually can delete it, and today we’ll show you how. The more memory you have in your PC, the bigger the file will be. So What is hiberfil.sys Anyway? Windows has two power management modes that you can choose from: one is Sleep Mode, which keeps the PC running in a low power state so you can almost instantly get back to what you were working on. The other is Hibernate mode, which completely writes the memory out to the hard drive, and then powers the PC down entirely, so you can even take the battery out, put it back in, start back up, and be right back where you were. Hibernate mode uses the hiberfil.sys file to store the the current state (memory) of the PC, and since it’s managed by Windows, you can’t delete the file. So if you never use it, and want to disable Hibernate mode, keep reading. Personally I stick with Sleep Mode the vast majority of the time, but I do use Hibernate quite often. Disable Hibernate (and Delete hiberfil.sys) in Windows 7 or Vista You’ll need to open an administrator mode command prompt by right-clicking on the command prompt in the start menu, and then choosing Run as Administrator. Once you’re there, type in the following command: powercfg -h off You should immediately notice that the Hibernate option is gone from the Shut down menu. You’ll also notice that the file is magically gone! For more about dealing with Hibernate like setting how long it takes to head into Hibernate mode, you can check out our article on How to Manage Hibernate Mode in Windows 7. Disabling Hibernate Mode in Windows XP It’s a lot easier in Windows XP to get rid of Hibernate mode… in fact, we’ve already covered it before, but we’ll cover it again. Just head into Control Panel –> Power Options, and then find the Hibernate tab. Uncheck the box, reboot your PC, and then you can delete the hiberfil.sys file. Similar Articles Productive Geek Tips How to Delete a System File in Windows 7 or VistaDisable Delete Confirmation Dialog in Windows 7 or VistaClear IE7 Browsing History From the Command LineHide, Delete, or Destroy the Recycle Bin Icon in Windows 7 or VistaClear the Auto-Complete Email Address Cache in Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

    Read the article

  • Response: Agile's Second Chasm

    - by Malcolm Anderson
    William Pietri over at Agile Focus has written an interesting article entitled, "Agile’s Second Chasm (and how we fell in)" in which he talks about how agile development has fallen into a common trap where large companies are now spending a lot of money hiring agile (Scrum) consultants just so that they can say they are agile, but all the while avoiding any change that is required by Scrum.   It echoes the questions that I've been asking for a while, "Can a fortune 500 company actually do agile development?"  I'm starting to think that the answer is "usually not"   William ask 3 questions at the end of his article that I will answer here.   1) Have I seen agile development brought in and then preemptively customized (read: made into ScrummerFall)?   Yes, Scrum is hard and disruptive.  It's a spotlight on company dysfunction.  In a low trust environment like most fortune 500 companies Scrum will be subverted by anyone who has ever seen "transparency" translate into someone being laid off.   2) If I had to do it all over again, would I change anything?  No, this is a natural progression, but the agile principles are powerful enough, that the companies that don't adopt them will no longer be competitive and will start to fail.   3) Is this situation solvable?  I think it is.  I think that one of the issues is that you often see companies implementing Scrum, but avoiding the agile engineering practices.  I believe that you cannot do one without the other.  Scrum keeps the ship sailing in smooth deep waters.  The agile engineering practices keep the engine running smoothly and cleanly.  If you implement agile engineering practices without Scrum, you run the risk of ending up with a great running piece of software that is useful to no one.  On the other hand, implementing cargo-cult Scrum without the agile engineering practices and you end up (especially in a fortune 500 company) being steered in the right direction, but with your development practices coming to a dead halt because you have code that can not keep up with the changes in requirements.   If you are trying to do Scrum, make sure that you hire some agile engineering coaches, or else you may find your deveolpment engines grinding to a dead halt in the middle of the open ocean.

    Read the article

  • git workflow for separating commits

    - by gman
    Best practices with git (or any VCS for that matter) is supposed to be to have each commit do the smallest change possible. But, that doesn't match how I work at all. For example I recently I needed to add some code that checked if the version of a plugin to my system matched the versions the system supports. If not print a warning that the plugin probably requires a newer version of the system. While writing that code I decided I wanted the warnings to be colorized. I already had code that colorized error message so I edited that code. That code was in the startup module of one entry to the system. The plugin checking code was in another path that didn't use that entry point so I moved the colorization code into a separate module so both entry points could use it. On top of that, in order to test my plugin checking code works I need to go edit UI/UX code to make sure it tells the user "You need to upgrade". When all is said and done I've edited 10 files, changed dependencies, the 2 entry points are now both dependant on the colorization code, etc etc. Being lazy I'd probably just git add . && git commit -a the whole thing. Spending 10-15 minutes trying to manipulate all those changes into 3 to 6 smaller commits seems frustrating which brings up the question Are there workflows that work for you or that make this process easier? I don't think I can some how magically always modify stuff in the perfect order since I don't know that order until after I start modifying and seeing what comes up. I know I can git add --interactive etc but it seems, at least for me, kind of hard to know what I'm grabbing exactly the correct changes so that each commit is actually going to work. Also, since the changes are sitting in the current directory it doesn't seem like it would be easy to run tests on each commit to make sure it's going to work short of stashing all the changes. And then, if it were to stash and then run the tests, if I missed a few lines or accidentally added a few too many lines I have no idea how I'd easily recover from that. (as in either grab the missing lines from the stash and then put the rest back or take the few extra lines I shouldn't have grabbed and shove them into the stash for the next commit. Thoughts? Suggestions? PS: I hope this is an appropriate question. The help says development methodologies and processes

    Read the article

  • How should game objects be aware of each other?

    - by Jefffrey
    I find it hard to find a way to organize game objects so that they are polymorphic but at the same time not polymorphic. Here's an example: assuming that we want all our objects to update() and draw(). In order to do that we need to define a base class GameObject which have those two virtual pure methods and let polymorphism kicks in: class World { private: std::vector<GameObject*> objects; public: // ... update() { for (auto& o : objects) o->update(); for (auto& o : objects) o->draw(window); } }; The update method is supposed to take care of whatever state the specific class object needs to update. The fact is that each objects needs to know about the world around them. For example: A mine needs to know if someone is colliding with it A soldier should know if another team's soldier is in proximity A zombie should know where the closest brain, within a radius, is For passive interactions (like the first one) I was thinking that the collision detection could delegate what to do in specific cases of collisions to the object itself with a on_collide(GameObject*). Most of the the other informations (like the other two examples) could just be queried by the game world passed to the update method. Now the world does not distinguish objects based on their type (it stores all object in a single polymorphic container), so what in fact it will return with an ideal world.entities_in(center, radius) is a container of GameObject*. But of course the soldier does not want to attack other soldiers from his team and a zombie doesn't case about other zombies. So we need to distinguish the behavior. A solution could be the following: void TeamASoldier::update(const World& world) { auto list = world.entities_in(position, eye_sight); for (const auto& e : list) if (auto enemy = dynamic_cast<TeamBSoldier*>(e)) // shoot towards enemy } void Zombie::update(const World& world) { auto list = world.entities_in(position, eye_sight); for (const auto& e : list) if (auto enemy = dynamic_cast<Human*>(e)) // go and eat brain } but of course the number of dynamic_cast<> per frame could be horribly high, and we all know how slow dynamic_cast can be. The same problem also applies to the on_collide(GameObject*) delegate that we discussed earlier. So what it the ideal way to organize the code so that objects can be aware of other objects and be able to ignore them or take actions based on their type?

    Read the article

  • 2d, Top-down map with different levels

    - by Ktash
    So, I'm creating a 2d, top down, sprite based (tiled) game, and right now I'm working on maps (well, a map editor at the moment, but it will be creating my maps, so basically the same thing). The scenario So, I'm thinking about efficiency and creating a map in pieces. In each piece, I plan on having 'layers'. Basically, I plan on rendering it down to a 'below hero' level, and an 'above hero' level, with the hero rendered in between obviously. There will likely also be a 'on level with hero' layer, but I'm not quite there yet. Not even worrying about events or interaction yet. Just looking to get a hero on the screen. Now for movement, I obviously need to know what tiles can be moved and in what direction. My plan at the moment is each tile getting 8 bits (4 'can enter in direction' bits, 4 'can leave in direction'). This will allow me to limit movement and even allow one way directional movement. The dilemma This works great for a lot of scenarios. It will allow me to store a map in essentially 3 layers, a string, and gives me flexibility going forward. However, I can't create maps that themselves have layers. A good example is a bridge where the user can go under or over the bridge without invalid moves being allowed. I can't create a platform and allow movement underneath. These are things I would like to be able to include in my game. My idea In theory, I could allow multiple hero layers and then allow multiple sets of 'below' and 'above' layers (or sandwich layers). But this complicates my system, and makes movement between maps potentially tricky (If the hero is on the third layer at the edge of a map, but that corresponds to the second layer on the other map, how can I allow or disallow movement). My question Is there a better way to manage multiple maps with multiple levels like this where a users level may be 'connected' on different levels on different maps? Or even... Am I doing this the hard way? Is there a more standard way to handle top-down 2d tiled maps that I am just not aware of? Things to note or that might be helpful This will be done in Javascript (transferred around in JSON) State will need to be transferred quickly, so a map-id and x/y/direction should be enough to get me a boolean 'can move' value Maps will not be standard sized (though they will be in a certain number of tiles) Making an editor tool so that I can have others help, so something that I can create in a tool would be helpful 'Teleportation' locations will likely need to exist to get into building maps and to and from different map sets (which will not necessarily be connected), but have not been created yet (lumping in with events at the moment).

    Read the article

  • Can my machine run Ubuntu( kubuntu | xubuntu | mint ) 12.04 WELL?

    - by Steve
    I have a 9 year old computer packing the hardware listed below. My question is, can I run 12.04 ( Ubuntu, Kubuntu, MINT or Xubuntu ) WELL? I was running Ubuntu 10.10 and I upgraded to 12.04 by going through each release via the update manager: 11.04 - 11.10 -12.04 During the installation process for 12.04 I saw an error message that there was an error installing and setting up part of the kernel. Later, when I tried installing a package in synaptic, I got another error message mentioning the kernel. When I rebooted, I got told somehting about my video and graphics was not configured properly and that I would have to do it manually ( like I know ). It gave me the option to enter the system in low graphics mode, but it just hanged. I had an old livecd of Xubuntu 10.10 around so I used that to get into my computer and copy data over to an external hard drive. I think tried to install Xubuntu 10.10 from the livecd, with the option "download updates" checked. The install process moved along a bit, then halted for about 5 hours. I rebooted my machine and tried the Xubuntu 10.10 installer WITHOUT the option to "download updates". The install completed in about 15 minutes. So, all of that is making me wonder if there is someting about 12.04 that does not like my hardware. I'm willing to try again, but only if I know I will not have to spend hours just to get to an error message and a hosed up system like I did last night. I also think I have a lot more RAM than is being reported in the output below. I had extra ram installed last year. I'm not good with the command line readouts, but there seems like there should be a lot more. I wasn't thrilled with Unity. I am willing to try Kubuntu 12.04. Will I run into the same problems? What is the highest version of a *ubuntu can I upgrade to? Thanks CPU Model: Intel(R) Pentium(R) 4 CPU 2.53GHz Frequency: 2533.223 MHz L2 Cache: 512 KB Bogomips: 5066.44 Numbering: family(15) model(2) stepping(7) Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid RAM ~$ free -mt total used free shared buffers cached Mem: 1506 891 615 0 91 521 -/+ buffers/cache: 278 1227 Swap: 1609 0 1609 Total: 3116 891 2225 Video Card 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. V9180 Magic Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fe9e0000 [disabled] [size=128K] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Motherboard Intel 845PE ATX 533FSB DDR333 USB2

    Read the article

  • Keeping the meshes "thickness" the same when scaling an object

    - by user1806687
    I've been bashing my head for the past couple of weeks trying to find a way to help me accomplish, on first look very easy task. So, I got this one object currently made out of 5 cuboids (2 sides, 1 top, 1 bottom, 1 back), this is just for an example, later on there will be whole range of different set ups. Now, the thing is when the user chooses to scale the whole object this is what should happen: X scale: top and bottom cuboids should get scaled by a scale factor, sides should get moved so they are positioned just like they were before(in this case at both ends of top and bottom cuboids), back should get scaled so it fits like before(if I simply scale it by a scale factor it will leave gaps on each side). Y scale: sides should get scaled by a scale factor, top and bottom cuboid should get moved, and back should also get scaled. Z scale: sides, top and bottom cuboids should get scaled, back should get moved. Hope you can help, EDIT: So, I've decided to explain the situation once more, this time more detailed(hopefully). I've also made some pictures of how the scaling should look like, where is the problem and the wrong way of scaling. I this example I will be using a thick walled box, with one face missing, where each wall is made by a cuboid(but later on there will be diffrent shapes of objects, where a one of the face might be roundish, or triangle or even under some angle), scaling will be 2x on X axis. 1.This is how the default object without any scaling applied looks like: http://img856.imageshack.us/img856/4293/defaulttz.png 2.If I scale the whole object(all of the meshes) by some scale factor, the problem becomes that the "thickness" of the object walls also change(which I do not want): http://img822.imageshack.us/img822/9073/wrongwaytoscale.png 3.This is how the correct scaling should look like. Appropriate faces gets caled in this case where the scale is on X axis(top, bottom, back): http://imageshack.us/photo/my-images/163/rightwayxscale1.png/ 4.But the scale factor might not be the same for all object all of the times. In this case the back has to get scaled a bit more or it leaves gaps: http://imageshack.us/photo/my-images/9/problemwhenscaling.png/ 5.If everything goes well this is how the final object should look like: http://imageshack.us/photo/my-images/856/rightwayxscale2.png/ So, as you have might noticed there are quite a bit of things to look out when scaling. I am asking you, if any of you have any idea on how to accomplish this scaling. I have tried whole bunch of things, from scaling all of the object by the same scale factor, to subtracting and adding sizes to get the right size. But nothing I tried worked, if one mesh got scaled correctly then others didnt. Donwload the example object. English is not my first language, so I am really sorry if its hard to understand what I am saying.

    Read the article

  • Why C++ people loves multithreading when it comes to performances?

    - by user1849534
    I have a question, it's about why programmers seems to love concurrency and multi-threaded programs in general. I'm considering 2 main approach here: an async approach basically based on signals, or just an async approach as called by many papers and languages like the new C# 5.0 for example, and a "companion thread" that maanges the policy of your pipeline a concurrent approach or multi-threading approach I will just say that I'm thinking about the hardware here and the worst case scenario, and I have tested this 2 paradigms myself, the async paradigm is a winner at the point that I don't get why people 90% of the time talk about concurrency when they wont to speed up things or make a good use of their resources. I have tested multi-threaded programs and async program on an old machine with an Intel quad-core that doesn't offer a memory controller inside the CPU, the memory is managed entirely by the motherboard, well in this case performances are horrible with a multi-threaded application, even a relatively low number of threads like 3-4-5 can be a problem, the application is unresponsive and is just slow and unpleasant. A good async approach is, on the other hand, probably not faster but it's not worst either, my application just waits for the result and doesn't hangs, it's responsive and there is a much better scaling going on. I have also discovered that a context change in the threading world it's not that cheap in real world scenario, it's infact quite expensive especially when you have more than 2 threads that need to cycle and swap among each other to be computed. On modern CPUs the situation it's not really that different, the memory controller it's integrated but my point is that an x86 CPUs is basically a serial machine and the memory controller works the same way as with the old machine with an external memory controller on the motherboard. The context switch is still a relevant cost in my application and the fact that the memory controller it's integrated or that the newer CPU have more than 2 core it's not bargain for me. For what i have experienced the concurrent approach is good in theory but not that good in practice, with the memory model imposed by the hardware, it's hard to make a good use of this paradigm, also it introduces a lot of issues ranging from the use of my data structures to the join of multiple threads. Also both paradigms do not offer any security abut when the task or the job will be done in a certain point in time, making them really similar from a functional point of view. According to the X86 memory model, why the majority of people suggest to use concurrency with C++ and not just an async aproach ? Also why not considering the worst case scenario of a computer where the context switch is probably more expensive than the computation itself ?

    Read the article

  • PHP or C++? I just want to choose a language and focus on it!

    - by user19177
    I love C++, but I feel I don't know if I should focus on web, so PHP, or C++. It's just an hard choice because right now I want to focus on one language and don't want to switch it a few months later. With C++ I'd program in SDL, while with PHP I don't know yet. I am not a very advanced programmer but I know basics of programming and can get going very well if determined. The problem is I just don't know.. I'm like OK! I'll go for C++! Then a minute later, wait what if I went with C#? Why this that.. ! I've read milion threads about C vs VB C# Python Ruby etc, all of them which I could find! It got me nowhere. The problem is probably I need to know something from some experts I guess.. I'm sure I'm not the only one who feels/felt like I do right now yeah? Uhm... I guess I might help you with some details so your answer may be easier to write! ( And also, if you want to say something else which is not related to PHP or C++, you can do that, I've just got to the conclusion that C++ and PHP are the ones that are worth it but yeah. C# I've discarded due to some stuff I read which says in future the projects I'd start now could just be useless and stuff like that.. ) Ok well : I'm 18 years old, and I program as hobby right now, but I do hope to go to a programming college in future. ( That would be in 2 years ). Hmm, I like programming games, and I'm mostly bothered by the fact "this language could be useless to what I need to do" ( I don't know how to explain this feeling! ) I don't know which other details I could add... I hope you guys can help me choose my path, this is really stressing me I'm wasting my time not doing anything right now because I don't know which language to use..! Thanks!

    Read the article

  • Is Ubuntu recognizing and/or using my NVIDIA graphics card?

    - by user212860
    This is my first post here, and I'm pretty new to Ubuntu/Linux. I currently have no other OS except for Ubuntu 13.10. (I used to have Win7 until i got a new terabyte hard drive). My current PC build, if any of this helps: CPU: Intel i5 quad-core Graphics: NVIDIA GeForce GTX 650 RAM: 8 GB HDD: 1 TB SATA 3 Motherboard: MSi Z77 A-G41 OS Ubuntu 13.10 So I recently installed Ubuntu 13.10 and put Steam on it, and I'm seeing that my games run a lot slower than they did when I had Win7. I figured it was a graphics problem, so I checked System Settings Details Overview. It says in "Graphics" that I have "Gallium 0.4 on NVE7" (don't really know what that is). Does this mean that Ubuntu is not using my graphics card? In System Settings Software & Updates Additional Drivers, it clearly shows like this: NVIDIA Corporation: GK107 [GeForce GTX 650] -This device is using an alternative driver (And then it shows a list of drivers that I can switch back and forth to) So this is a bit confusing. In Software and Updates, it clearly shows that I have my NVIDIA card installed, and that I have a driver selected for it. But in System Settings, it shows I have some Gallium 0.4 thing. I had done a bit of research, and ended up typing command: "lspci|grep VGA" in the Terminal. It showed this in response: VGA compatible controller: NVIDIA Corporation GK107 [GeForce GTX 650] (rev a1) The Terminal seems to recognize my graphics card. What it looks like to me, is that I don't have the proper driver, and I might be using my CPU's integrated graphics. When I switch around which driver I am using in that list, it still does not see my card in System Settings. Some of the drivers in the list give me some sort of OpenGL error when I try to run a game. It might just be that my games are running slow because the game developers have not optimized it for Ubuntu that well. However, that still doesn't take away from the fact that System Settings is not showing my NVIDIA card. TL;DR Version: How do I know if my video card is being recognized/used? If my video card is not being used, what is the best way fix that? Please make your answers easy to understand. I do not mind wordy responses, as long as I can follow what you're saying. Any help would be greatly appreciated! Thanks, Jabber5

    Read the article

  • Making user input/math on data fast, unlike excel type programs

    - by proGrammar
    I'm creating a research platform solely for myself to do some research on data. Programs like excel are terribly slow for me so I'm trying to come up with another solution. Originally I used excel. A1 was the cell that contained the data and all other cells in use calculated something on A1, or on other cells, that all could be in the end traced to A1. A1 was like an element of an array, I then I incremented it to go through all my data. This was way too slow. So the only other option I found originally was to hand code in c# the calculations inside a loop. Then I simply recompiled each time I changed my math. This was terribly slow to do and I had to order everything correctly so things would update correctly (dependencies). I could have also used events, but hand coding events for each cell like calculation would also be very slow. Next I created an application to read Excel and to perfectly imitate it. Which is what I now use. Basically I write formulas onto a fraction of my data to get live results inside excel. Then my program reads excel, writes another c# program, compiles it, and runs that program which runs my excel created formulas through a lot more data a whole lot faster. The advantage being my application dependency sorts everything (or I could use events) so I don't have to (like excel does) And of course the speed. But now its not a single application anymore. Instead its 2 applications, one which only reads my formulas and writes another program. The other one being the result which only lives for a short while before I do other runs through my data with different formulas / settings. So I can't see multiple results at one time without introducing even more programs like a database or at least having the 2 applications talking to each other. My idea was to have a dll that would be written, compiled, loaded, and unloaded again and again. So a self-updating program, sort of. But apparently that's not possible without another appdomain which means data has to be marshaled to be moved between the appdomains. Which would slow things down, not for summaries, but for other stuff I need to do with all my data. I'm also forgetting to mention a huge problem with restarting an application again and again which is having to reload ALL my data into memory again and again. But its still a whole lot faster than excel. I'm really super puzzled as to what people do when they want to research data fast. I'm completely unable to have a program accept user input and having it fast. My understanding is that it would have to do things like excel which is to evaluate strings again and again. So my only option is to repeatedly compile applications. Do I have a correct understanding on computer science? I've only just began programming, and didn't think I would have to learn much to do some simple math on data. My understanding is its either compiling my user defined stuff to a program or evaluating them from a string or something stupid again and again. And my only option is to probably switch operating systems or something to be able to have a program compile and run itself without stopping (writing/compiling dll, loading dll to program, unloading, and repeating). Can someone give me some idea on how computers work? Is anything better possible? Like a running program, that can accept user input and compile it and then unload it later? I mean heck operating systems dont need to be RESTARTED with every change to user input. What is this the cave man days? Sorry, it's just so super frustrating not knowing what one can do, and can't do. If only I could understand and learn this stuff fast enough.

    Read the article

  • Need Help with partitions and such Dual Booting 13.10 w/ windows 7

    - by Aymax
    so I've spent the past couple days freaking out about this and looking for answers, and I decided to resort to asking on forums. probably should have before I wasted 2 entire days. so I am trying to DUAL-INSTALL Ubuntu 13.10 with my x64 Windows 7 home premium computer. I have 6 gb of ram, 1TB hard drive, and a 3.3GHZ dual core processer (just in case it matters). I've managed to figure some things out. I've burned the ubuntu files onto a DVD, and I have been able to successfully run it off the disk. I also shrunk my Windows partition by 120Gb and partitioned that for Ubuntu (all using the windows Disk Manager). Problems: When I turn my computer on with the DVD in the tray, the computer cant find windows. it flashes a screen real quick that says something about not being able to find an operating system, and then goes to "grub" and asks what i want to do with Ubuntu. this scares me, because I don't know if that means that I will not be able to boot windows if I install Ubuntu. The Ubuntu 13.10 installer does not detect my Windows operating system. I only have the options to Erase everything on my drive, or "something else." I choose that, which brings me to 3 I don't understand the partition table. I have no idea which drive im selecting to install stuff on, much less which one to select. I tried to tell by the amount of memory partitioned off, but none of the numbers seem to be accurate. Plus, all the names are dev/sda(#). I know Ubuntu knows the name of my partition, because on the sidebars it shows the names of the different drives, including the partition I made; so why don't they use the names? I have no idea what I'm going to be erasing. I've read that I should know which is which by the file system type, but they are all NTFS, including the one I made. my only other option was FAT, none for EXT2 or any of that like people said to do. My main concerns are that of accidentally erasing windows or not being able to access windows. any feasible solution is helpful, weather it helps me with the install or to make Ubuntu see windows. I realize this question has been asked much, but i have found no feasible answers so far. I am relatively new to this, and have never installed an operating system before, so I do not know most of the jargon. please keep it relatively simple, please. I am not a programmer. Thanks.

    Read the article

  • A Windows Update Prevented Live Discs From Working? [migrated]

    - by user88311
    First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

    Read the article

  • How to set up an rsync backup to Ubuntu securely?

    - by ws_e_c421
    I have been following various other tutorials and blog posts on setting up a Ubuntu machine as a backup "server" (I'll call it a server, but it's just running Ubuntu desktop) that I push new files to with rsync. Right now, I am able to connect to the server from my laptop using rsync and ssh with an RSA key that I created and no password prompt when my laptop is connected to my home router that the server is also connected to. I would like to be able to send files from my laptop when I am away from home. Some of the tutorials I have looked at had some brief suggestions about security, but they didn't focus on them. What do I need to do to let my laptop with send files to the server without making it too easy for someone else to hack into the server? Here is what I have done so far: Ran ssh-keygen and ssh-copy-id to create a key pair for my laptop and server. Created a script on the server to write its public ip address to a file, encrypt the file, and upload to an ftp server I have access to (I know I could sign up for a free dynamic DNS account for this part, but since I have the ftp account and don't really need to make the ip publicly accessible I thought this might be better). Here are the things I have seen suggested: Port forwarding: I know I need to assign the server a fixed ip address on the router and then tell the router to forward a port or ports to it. Should I just use port 22 or choose a random port and use that? Turn on the firewall (ufw). Will this do anything, or will my router already block everything except the port I want? Run fail2ban. Are all of those things worth doing? Should I do anything else? Could I set up the server to allow connections with the RSA key only (and not with a password), or will fail2ban provide enough protection against malicious connection attempts? Is it possible to limit the kinds of connections the server allows (e.g. only ssh)? I hope this isn't too many questions. I am pretty new to Ubuntu (but use the shell and bash scripts on OSX). I don't need to have the absolute most secure set up. I'd like something that is reasonably secure without being so complicated that it could easily break in a way that would be hard for me to fix.

    Read the article

  • Introduction to Agile Development

    - by Grant Fritchey
    Even though my current job is a little weird, I still consider myself to be a DBA. I didn’t start that way in IT. I came through support and into development. I loved development. There was a constant struggle to attempt to improve your code, your understanding, and, most importantly, the process of development itself. Development can be slow and tedious. Left alone, developers can simply disappear to build a project and not come back for two years, at which time they deliver it. But, maybe that software isn’t what you wanted, or it’s no longer needed, or who knows what. So developers are constantly attempting to improve their processes in order to deliver more relavent software quicker (something DBAs could learn about). I really admire it. One of the many processes that has come out of that constant striving is known as Agile. As the name implies, Agile development attempts to come up with a quick, fast turning, business aware, well, for want of a word, agile, process that is more responsive to the needs of the business. There are tons and tons of books and blogs and videos on the subject that can get you going. But, Agile isn’t easy (note, Easy is not part of the name). Agile processes can be hard. I’ve worked on multiple agile teams, some successful, some not. The two principal differences between the teams were their discipline and their knowledge of the process. Discipline, that comes from within. But knowledge, ah, well there I can help. Red Gate is bringing a series of free instructional events to the United States in a few weeks time focused primarily on SQL Server (click here right now to register while there’s still space). We’re also offering some .NET instruction too. That’s a full day, free, with top experts in the business. But, the next day, there’s a full day session introducing Agile. You can go to this and learn how to do Agile. Develop that knowledge that will enable you to successfully use the Agile process. Go to this web site to check it out. No, this event is not free, but not everything can be. And it’s not just for developers. DBAs, you need to learn this stuff too. Management could also benefit from understanding these processes (because you guys can help to enforce discipline). It’s really for everyone involved in the development process.

    Read the article

  • Recommended learning path?

    - by stairmast0r
    First, my current standing: I know C++ at an.. advanced beginner level? I've gone through a book, I know the syntax well enough, I know a fair amount of standard library functions, and I've programmed some simple console stuff with it. I'd probably be able to program more with it if I knew how to structure a program, but I just can't seem to wrap my head around the whole concept of structuring something remotely complex. I've messed around with Java for a day or two, and the syntax was extremely easy to get the hang of, except that I didn't really know any functions. I'm plenty willing to learn, and to work hard to do so, but I don't really know where to go from here. Now, at the risk of sounding cliche, what I'd like to become is someone like the great three of id; Carmack, Romero, and Abrash. To be considered a genius. I believe anything can be learned, and nothing mentally limits anyone except lack of desire to learn. But I don't know how to learn this. They learned by doing, and making do with what resources they had. On the other hand, I have access to almost any books I want, access to the internet, and access to a more than capable computer and software. Should I learn more languages? Assembly? LISP? BASIC? Haskell? Should I dive straight into advanced topics like OpenGL? Or should I wait until I feel I've come closer to mastering the simpler things, like console programs, first? Should I follow tutorials? Should I follow books? Should I just dive into writing something and follow a reference manual as I go? What order should I do all this in? How should I do it? I want to completely master this; to be considered a genius. The most perfect career I can imagine is to start the next id. I have the drive to do it, I just don't know where to begin...

    Read the article

  • Getting current time in milliseconds

    - by user90293423
    How to get the current time in milliseconds? I'm working on a hacking simulation game and when ever someone connects to another computer/NPC, a login screen popups with a button on the side called BruteForce. When BruteForce is clicked, what i want the program to do is, calculate how many seconds cracking the password is going to take based on the player's CPU speed but that's the easy part. The hard part is i want to enter a character in the password's box every X milliseconds based on a TimeToCrack divided by PasswordLength formula. But since i don't know how to find how many milliseconds have elapsed since the second has passed, the program waits until the CurrentTime is higher than the TimeBeforeTheLoopStarted + HowLongItTakesToTypeaCharacter which is always going to be a second. How would you handle my problems? I've commented the game breaking part. std::vector<QString> hardware = user.getHardware(); QString CPU = hardware[0]; unsigned short Speed = 0; if(CPU == "OMG SingleCore 1.8GHZ"){ Speed = 2; } const short passwordLength = password.length(); /* It's equal to 16 */ int Time = passwordLength / Speed; double TypeSpeed = Time / passwordLength; time_t t = time(0); struct tm * now = localtime(&t); unsigned short EndTime = (now->tm_sec + Time) % 60; unsigned short CurrentTime = 0; short i = passwordLength - 1; do{ t = time(0); now = localtime(&t); CurrentTime = now->tm_sec; do{ t = time(0); now = localtime(&t); }while(now->tm_sec < CurrentTime + TypeSpeed); /* Highly flawed */ /* Do this while your integer value is under this double value */ QString tempPass = password; tempPass.chop(i); ui->lineEdit_2->setText(tempPass); i--; }while(CurrentTime != EndTime);

    Read the article

  • Want to make RTS strategy game, good starting point...?

    - by NOLANDI
    everybody! I find this community because I did research about game developing topics. So I decide to register on this community and ask for your opinion. I am not begineer in computer stuffs, and I know logic of programming language. I have little knowlegde of C, C++, Started to learn C#...but I was always oriented about other areas of IT. Amateur for game making but not in IT general! I am interested to make RTS strategy video game, isometric camera view (like PC GAME COMMANDOS for example)...so I started to read many books about DirectX, XNA, OpenGL, C#, AI programming...so I want to know where is good starting point for making this game genre. I want to use C# for this project, not C++, since I always had trouble with it, because it is too complicated. I see good oportunity for learning C#, since it has more object-oriented concept, with much less code and easy readible code for writing. Beside of that I know that C++ is the more powerful language until today. So I want to use DirectX and C# for my project. But it will required more time for sure, to learn it. I have trouble with finding books for c# & DirectX (I found just one), but in every next book, it is programming in c++! I read many web sites and they mentioned Slim DX, and in generaly, other articles which I read tells that it is possible to make good game with combination c# and directX, but...I don't have enough information about all this stuffs, so I became confused! It is really hard to have wish to learn c++ from scratch, since I started c# and I like it really...I don't try OpenGL, but I am already familiar with DirectX (some beginning stuffs), and I think that it is good and interesting. So, I decide to choose between maybe Unity3d and XNA first. XNA...hm, it sound that it is not bad solution, but I heard that it is already overcome technology, and I think that it is better to wait with XNA, until I try to make something with DirectX and C#, at first. But I dont know it is possible to make strategy game in XNA?! Maybe I am wrong. I also, find Unity 3D game engine and I find that I could programming there in C#, but many all examples are written in Javascript (Digital tutors videos)...But I generaly have wish to learn it too, because it allows to export games to mobile phones, there a lot of documentations, it is free, etc... I want to find best way to learn C# and DirectX, and make this game, but I dont know if it's possible to combine?! But maybe is good to first try Unity and XNA, because I am beginner?! Thank you all! I am willing to hear your expirience.

    Read the article

  • Writing a method to 'transform' an immutable object: how should I approach this?

    - by Prog
    (While this question has to do with a concrete coding dilemma, it's mostly about what's the best way to design a function.) I'm writing a method that should take two Color objects, and gradually transform the first Color into the second one, creating an animation. The method will be in a utility class. My problem is that Color is an immutable object. That means that I can't do color.setRGB or color.setBlue inside a loop in the method. What I can do, is instantiate a new Color and return it from the method. But then I won't be able to gradually change the color. So I thought of three possible solutions: 1- The client code includes the method call inside a loop. For example: int duration = 1500; // duration of the animation in milliseconds int steps = 20; // how many 'cycles' the animation will take for(int i=0; i<steps; i++) color = transformColor(color, targetColor, duration, steps); And the method would look like this: Color transformColor(Color original, Color target, int duration, int steps){ int redDiff = target.getRed() - original.getRed(); int redAddition = redDiff / steps; int newRed = original.getRed() + redAddition; // same for green and blue .. Thread.sleep(duration / STEPS); // exception handling omitted return new Color(newRed, newGreen, newBlue); } The disadvantage of this approach is that the client code has to "do part of the method's job" and include a for loop. The method doesn't do it's work entirely on it's own, which I don't like. 2- Make a mutable Color subclass with methods such as setRed, and pass objects of this class into transformColor. Then it could look something like this: void transformColor(MutableColor original, Color target, int duration){ final int STEPS = 20; int redDiff = target.getRed() - original.getRed(); int redAddition = redDiff / steps; int newRed = original.getRed() + redAddition; // same for green and blue .. for(int i=0; i<STEPS; i++){ original.setRed(original.getRed() + redAddition); // same for green and blue .. Thread.sleep(duration / STEPS); // exception handling omitted } } Then the calling code would usually look something like this: // The method will usually transform colors of JComponents JComponent someComponent = ... ; // setting the Color in JComponent to be a MutableColor Color mutableColor = new MutableColor(someComponent.getForeground()); someComponent.setForeground(mutableColor); // later, transforming the Color in the JComponent transformColor((MutableColor)someComponent.getForeground(), new Color(200,100,150), 2000); The disadvantage is - the need to create a new class MutableColor, and also the need to do casting. 3- Pass into the method the actual mutable object that holds the color. Then the method could do object.setColor or similar every iteration of the loop. Two disadvantages: A- Not so elegant. Passing in the object that holds the color just to transform the color feels unnatural. B- While most of the time this method will be used to transform colors inside JComponent objects, other kinds of objects may have colors too. So the method would need to be overloaded to receive other types, or receive Objects and have instanceof checks inside.. Not optimal. Right now I think I like solution #2 the most, than solution #1 and solution #3 the least. However I'd like to hear your opinions and suggestions regarding this.

    Read the article

  • The Definitive C++ Book Guide and List

    - by grepsedawk
    After more than a few questions about deciding on C++ books I thought we could make a better community wiki version. Providing QUALITY books and an approximate skill level. Maybe we can add a short blurb/description about each book that you have personally read / benefited from. Feel free to debate quality, headings, etc. Note: There is a similar post for C: The Definitive C Book Guide and List Reference Style - All Levels The C++ Programming Language - Bjarne Stroustrup C++ Standard Library Tutorial and Reference - Nicolai Josuttis Beginner Introductory: C++ Primer - Stanley Lippman / Josée Lajoie / Barbara E. Moo Accelerated C++ - Andrew Koenig / Barbara Moo Thinking in C++ - Bruce Eckel (2 volumes, 2nd is more about standard library, but still very good) Best practices: Effective C++ - Scott Meyers Effective STL - Scott Meyers Intermediate More Effective C++ - Scott Meyers Exceptional C++ - Herb Sutter More Exceptional C++ - Herb Sutter C++ Coding Standards: 101 Rules, Guidelines, and Best Practices - Herb Sutter / Andrei Alexandrescu C++ Templates The Complete Guide - David Vandevoorde / Nicolai M. Josuttis Large Scale C++ Software Design - John Lakos Above Intermediate Modern C++ Design - Andrei Alexandrescu C++ Template Metaprogramming - David Abrahams and Aleksey Gurtovoy Inside the C++ Object Model - Stanley Lippman Classics / Older Note: Some information contained within these books may not be up to date and no longer considered best practice. The Design and Evolution of C++ - Bjarne Stroustrup Ruminations on C++ Andrew Koenig / Barbara Moo Advanced C++ Programming Styles and Idioms - James Coplien

    Read the article

  • Passing a parameter using RelayCommand defined in the ViewModel (from Josh Smith example)

    - by eesh
    I would like to pass a parameter defined in the XAML (View) of my application to the ViewModel class by using the RelayCommand. I followed Josh Smith's excellent article on MVVM and have implemented the following. XAML Code <Button Command="{Binding Path=ACommandWithAParameter}" CommandParameter="Orange" HorizontalAlignment="Left" Style="{DynamicResource SimpleButton}" VerticalAlignment="Top" Content="Button"/> ViewModel Code public RelayCommand _aCommandWithAParameter; /// <summary> /// Returns a command with a parameter /// </summary> public RelayCommand ACommandWithAParameter { get { if (_aCommandWithAParameter == null) { _aCommandWithAParameter = new RelayCommand( param => this.CommandWithAParameter("Apple") ); } return _aCommandWithAParameter; } } public void CommandWithAParameter(String aParameter) { String theParameter = aParameter; } #endregion I set a breakpoint in the CommandWithAParameter method and observed that aParameter was set to "Apple", and not "Orange". This seems obvious as the method CommandWithAParameter is being called with the literal String "Apple". However, looking up the execution stack, I can see that "Orange", the CommandParameter I set in the XAML is the parameter value for RelayCommand implemenation of the ICommand Execute interface method. That is the value of parameter in the method below of the execution stack is "Orange", public void Execute(object parameter) { _execute(parameter); } What I am trying to figure out is how to create the RelayCommand ACommandWithAParameter property such that it can call the CommandWithAParameter method with the CommandParameter "Orange" defined in the XAML. Is there a way to do this? Why do I want to do this? Part of "On The Fly Localization" In my particular implementation I want to create a SetLanguage RelayCommand that can be bound to multiple buttons. I would like to pass the two character language identifier ("en", "es", "ja", etc) as the CommandParameter and have that be defined for each "set language" button defined in the XAML. I want to avoid having to create a SetLanguageToXXX command for each language supporting and hard coding the two character language identifier into each RelayCommand in the ViewModel.

    Read the article

< Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >