Search Results

Search found 14185 results on 568 pages for 'cd drive'.

Page 526/568 | < Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >

• Nvidia RAID 1 Problem. Degraded drives...

  - by Vedat Kursun

  I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

  Read the article

• Azure Virtual Machines - what fault tolerance do they provide?

  - by Borek

  We are thinking about moving our virtual machines (Hyper-V VHDs) to Windows Azure but I haven't found much about what kind of fault tolerance that infrastructure provides. When I run VHD in Azure, I've got two questions: Is my VHD and all the data in it safe? I think that uploaded VHDs use the "Storage" infrastructure so they should be automatically replicated to multiple disks and geographically distributed but should I still make a full-image backup just to be safe? (Note that of course I will be backing up the actual data inside VMs that I care about; I just want to know if there is a chance greater than 0.0000001% that one day I will receive an email from Microsoft telling me that my VM is gone and that I should create or restore it from scratch). Do I need to worry about other things regarding the availability of my VMs? I mean, when I have an on-premise server I need to worry about the hardware itself, about the host operating system, what would happen if my router failed, if my Hyper-V's C: drive failed etc. Am I right in thinking that with Azure, their infrastructure takes care of all of this? Thanks.

  Read the article

• One workstation gets slow access to the server, but others are fast

  - by Mike Hanson

  I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

  Read the article

• Use external display from boot on Samsung laptop

  - by OhMrBigshot

  I have a Samsung RV511 laptop, and recently my screen broke. I connected an external screen and it works fine, but only after Windows starts. I want to be able to use the external screen right from boot, in order to set the BIOS to boot from DVD, and to then install a different OS and also format the hard drive. Right now I can only use the screen when Windows loads. What I've tried: I've tried opening up the laptop and disconnecting the display to make it only find the external and use the VGA as default -- didn't work. I've tried using the Fn+key combo in BIOS to connect external display - nothing I've been looking around for ways to change boot sequence without entering BIOS, but it doesn't look like it's possible. Possible solutions? A way to change boot sequence without entering BIOS? Someone with the same brand/similar model to help me blindly keystroke the correct arrows/F5/F6 buttons while in BIOS mode to change boot sequence? A way to force the external display to work from boot, through modifying the internal connections (I have no problem taking the laptop apart if needed, please no soldering though), through BIOS or program? Also, if I change boot sequence without accessing external screen, would the Ubuntu 12.1 installation sequence attempt to use the external screen or would I only be able to use it after Linux is installed and running? I'd really appreciate help, I can't afford to fix the screen for a few months from now, and I'd really like to make my computer come back to decent performance! Thanks in advance!

  Read the article

• How can I get Windows to apply its settings?

  - by Jouke van der Maas

  I have a computer with a major problem; it gives a blue screen when the login screen loads. I've been using this guide to troubleshoot the issue, and now I've run into a problem. I have determined the issue is not bad memory or a bad hard drive. According to the guide, this means the problem is in the OS. I've tried to follow the steps, but Windows (Vista SP1) somehow doesn't remember any changes. On every reboot, the computer is in exactly the same state it was in before. Any changes to system settings or files won't be recorded. As this means I can't check what is causing the problem, I can't fix my PC. Is there a way to find out what's causing this? Is it just a mode Windows goes into to protect itself, or is it some other problem? Anything to help troubleshoot will be of great help here. PS. I'm kind of new to this site. If I messed up, please tell me in the comments.

  Read the article

• PC in POST loop

  - by Antony Scott

  Hi, I have a custom built PC using a Gigabyte GA-EP35-DS3P motherboard with a Q6600 CPU. For the last 2 days it has got itself stuck into a POST loop. Saying that, I don't think it actually got in to the BIOS. It repeatedly lit up the LEDs and then not much more. Sometimes I could see the CPU fan twitch. Today I re-seated the DIMMs and it powered up straight away. Could this be a sign of an impending hardware failure? The PC is hooked up to a UPS, so I don't think it's a power spike or anything like that, as I have 2 other PCs on the same UPS and they're both fine. Yesterday, the first time this happened, I was getting a message which I think said "Scanning BIOS image on hard drive". I've been building and using PCs for well over 25 years and that's a new one on me! I don't think it's an over heating problem, as when the PC does finally boot up the CPU is running at 35-40C. Any help or suggestions would be greatly appreciated.

  Read the article

• I want to dual boot Windows 8 on a Macbook Pro that doesn't already have Windows. Do I have to buy Windows twice?

  - by Cam Jackson

  My girlfriend just bought a Macbook Pro, and she wants to to dual boot OSX with Windows. Specifically, she would like to use Windows 8. What I already know is the following: Windows 8 discs are only meant for upgrading from previous versions of Windows Windows 8 discs can be used to do a clean install, but (officially) only if there's already a legit version of Windows on the hard disk I've read somewhere of a disc being used to install Windows 8 on a fresh, out-of-the-box hard drive, and it all went well until the activation phase, where it said that the disc could only be used for upgrades The logical conclusion would be that in my circumstance, the only option is to buy a full (non-upgrade) retail copy of Windows 7, install that using boot camp, then load up Windows 7, insert the Windows 8 upgrade disc and do the 7-8 upgrade. However, I've read quite a few blog posts of people installing Windows 8 using bootcamp (e.g., Ars Technica, which leads me to believe that it might be possible to do so without installing Win7 first. The problem is that I'm not sure if these people were using preview versions, which obviously won't have the license issues down the track. Can anyone provide a definitive answer as to how to put Win8 on a Mac?

  Read the article

• What does SQL Server's BACKUPIO wait type mean?

  - by solublefish

  I'm using Sql Server 2008 ("R1"), with some maintenance plans that back up my databases to a network share. Some of my backup jobs show long waits of type "BACKUPIO". Of course it seems like this is an I/O subsystem limitation, but I'm skeptical. Perfmon stats for I/O on the production (source) server are well within normal trends for that server. The destination server shows a sustained 7MB/s write rate, which seems incredibly low, even for a slow disk. The network link is gigabit ethernet and nowhere near saturated. The few docs I've turned up about BACKUPIO indicate that it's not specifically a wait on I/O, surprisingly enough. This MSFT doc says it's abnormal unless you're using a tape drive, which I'm not. But it doesn't say (or I don't understand) exactly what resource is missing. http://www.docstoc.com/docs/24580659/Performance-Tuning-in-SQL-Server-2005 And this piece says it's not related to I/O performance at all. http://www.informit.com/articles/article.aspx?p=686168&seqNum=5 "Note that BACKUPIO and IO_AUDIT_MUTEX are not related to IO performance." Anyway, does anyone know what BACKUPIO actually means and/or what I can do to diagnose or eliminate it?

  Read the article

• How to set up Windows 7 Professional as a NAS

  - by Enyalius

  I searched and didn't find any answers, so please forgive me if this is a repeat. Anyway, I have an older computer that I'm using as an HTPC, and I was hoping that I could use it as a NAS/multimedia server, as well. My primary uses would include accessing content on my PS3 (same LAN), accessing content from other computers on my home network and (if I can) accessing content from my Android phone over the internet. I have used SubSonic to stream music to my Android phone and other computers before, but I would really like to find a way to do this natively if possible. I know that I can buy external hard disk cases that can plug in the USB port of my router, that I can get a Drobo or other network storage solution, but I would really just rather not spend the money (especially considering that I already have a computer that I should be able to use). Hardware involved: Apple AirPort Extreme base station router (most recent revision) Home Theater Personal Computer: Core 2 Duo @ 2.4GHz, 8GB DDR2 RAM, ~3.5TB hard drive space Sony Playstaiton 3 Thin 120GB HTC Thunderbolt (I have 4G coverage) rooted and running Android 2.2.1 Various Apple laptops Various Windows 7 desktops/laptops Thanks in advance! Note- I have looked at open source NAS software but I would like to preserve the Windows Media Center functionality in Windows 7, so other NAS software is not an option for me currently. .

  Read the article

• Fixing damaged partition table

  - by dr4cul4

  This is continuation of Recover Extended Partition , but this time I have different problem related partition table it self. I managed to restore partition that I needed and backed up files that were crucial to me (at least those that I had space to store somewhere) OK now get to the problem. My partition table is corrupted, booting RIP Linux I can mount it in truecrypt (and other ones that recovered), but that's basically it. When I launch GParted I have unallocated drive. GParted Dev info: Device Information Model: ATA ST2000DL003-9VT1 Size: 1.82TiB Path: /dev/sda Partition table: unrecognized Heads: 255 Sectors/track: 63 Cylinders: 243201 Total Sectors: 3907029168 Sector size: 512 When I check information on unallocated space I get: File system: unallocated Size: 1.82TiB First sector: 0 Last sector: 3907029167 Total sectors: 3907029168 Warning: Can't have a partition outside the disk! Now the output of testdisc (Analyze): TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Partition Start End Size in sectors > 1 P Linux 13132 242 39 16353 233 8 51744768 2 E extended LBA 16807 223 1 243201 254 63 3637021626 No partition is bootable 5 L Linux 16807 223 57 20430 39 25 58191872 X extended 20430 70 1 243201 78 13 3578816632 Invalid NTFS or EXFAT boot 6 L HPFS - NTFS 20430 71 58 243201 78 13 3578816512 6 LNext Now fdisk: # fdisk -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00039cd0 Device Boot Start End Blocks Id System /dev/sda1 210980864 262725631 25872384 83 Linux /dev/sda2 270018504 3907040129 1818510813 f W95 Ext'd (LBA) /dev/sda5 270018560 328210431 29095936 83 Linux /dev/sda6 328212480 3907028991 1789408256 7 HPFS/NTFS/exFAT Now I would like to fix that to arrange partitions correctly, but I have no idea which tool is capable of fixing that (tried, a few, some of them offered fixing, but it was to risky at the moment - still backing up data).

  Read the article

• Apache and Virtual Hosts Problem on OS X

  - by Charles Chadwick

  I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

  Read the article

• Please help me get rid of asmonitor.exe

  - by LCD Fire

  It might be silly and I trully apologize if the question is not apropriate here, but I have really tried and got to nowhere. I have a windows xp startup error which indicates something about asmonitor.exe program from the ActualSpy keylogger. I had installed but removed ActualSpy keylogger using Superantispyware or something close. I have searched the registries and found a asmonitor entry deleted. I looked at startup programs and can not find the asmonitor program. In addition, I searched the c: drive using regular explorer search and searched using ESET NOD32 antivirus. In each case I cannot find the application... I have even looked at startup programs using msinfo32 command. msconfig-startup NOTHING! it drives me crazy! I can't get rid of it. it is still showing up at windows startup! Where do I find this little program? where is it located? I don't want it to keep showing up. I don't want programs that can do it.. or maybe free ones. But I prefer manual solutions. aren't are any?

  Read the article

• What do Windows 8 Refresh and Reset my PC really do?

  - by Jerry Nixon

  In Windows 8 I can reset everything and reinstall Windows. I assume this will clear my drive and start from scratch? Is that right? Does this create a Windows.old folder? I see this dialog, but aren't my settings and preferences saved in the cloud? If I screw up my settings and reset like this, are my settings also refreshed back to defaults? Since I use SkyDrive to sync my files, my personal files are safe, right? Also, in Windows 8 I can refresh my PC without affecting files. Are my desktop and/or Windows store apps uninstalled when I refresh my PC? I see this dialog, but I still am not sure. For example, when it says apps are "kept" does that mean I don't have to buy them again or are they installed after the refresh is over for me? I assume "from disk" means desktop apps? Or maybe corp apps? What would motivate a user to choose between these two?

  Read the article

• Server 2008 R2 boot is at 2 hours and counting. What now?

  - by Jesse

  This morning, we rebooted our Server 2008 R2 box. No problem, came right back up. Then we shut it down and let it install windows updates. While it was off, we added some RAM. Then we turned it back on. The system came right back up to the "press ctrl-alt-delete" screen, so far, so good. I logged in. The system got as far as "Applying Group Policy" -- then spent almost an hour applying drive mappings. Finally finished that, and has now spent 30 minutes on waiting for the Event Notification Service. I still haven't been able to log in. Remote desktop service doesn't appear to be running yet. I tried viewing the event log from another machine. I see that the box is writing to the Security log, but there are no events in System or Application in the last 45 minutes. Digging through the System log of events from 45 minutes ago, I see a bunch of timeouts: A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service. [lots of these] A timeout (30000 milliseconds) was reached while waiting for a transaction response from the wuauserv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SessionEnv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service. What can I do? Should I try shutting it down remotely, or will that do more damage?

  Read the article

• DFS Root namespace is RDWR for all users

  - by Patrick

  We have an existing DFS Replication and Namespace group that we use to serve the company's files. This has been operating fine for us for some time now, and continues to do so. however a situation arose yesterday afternoon that has led us to be stumped. The problem is that we have our name space presented as : \\domain.co.uk\public\[8 or 9 folders that are mapped to the users in the business] We had a problem this morning that meant that a number of users started mapping their AD Home Drive directly to the \\domain.co.uk\public directory and we found that they had read/write. This rapidly became a problem as a at least one director saved some moderately sensitive documents in there and basically anyone could read them. I've tidied up that specific problem with some deft scripting and a slight modification of group policy. However I would like to make \public read only, the trouble is I can't work out where the ACLs for that folder would be held. All the folders that are presented as \\domain.co.uk\public\[folder] are 'real' folders on logical volumes on our DFS servers so are secured with groups that are applied via the 'security' tab. I'd like to do the same on \public but I can't find it. I have looked through amongst other things \Sysvol\domain.co.uk but can't find it and after a lot of clicking and a bit of reading I can't see how to lock it down. Any thoughts?

  Read the article

• Copying files to my laptop makes them locked

  - by John

  When I save files from e.g. remote desktop or from an email (outlook) attachments, or from skype even to my local machine they show a locked Icon on the file. Then e.g. SQL Server doesn't let me restore backups as it says the operating system doesn't have access to the file. I've had success fixing this by setting the ownership of the parent folder to my user and then let it apply to sub folders. Also sometimes I need to click - Proerties - Security - Advanced - Change Permmissions, then check "change child permissions..." and apply on the parent dir. I'm using Windows 7 64 bit Proffessional, on HP Probook 4530, and I have a administrator user. This is a real pain to do everytime. I suspect it might be because of HP software that came with the laptop, I think there is drive encryption as part of the protect tools. Although I'm hoping there's something in windows i can set to change the behaviour to not lock these files.

  Read the article

• Basics about file/folder permissions on Win 7

  - by Altar

  Hi. Under Win XP I never touched the permissions of a file/folder. I was happy with the way it worked. But recently I installed Windows 7 on a drive that previously hosted Windows XP. Now, some programs do not have 'read' and/or 'write' access to their own folders - and I am not talking about system folders like 'Program Files' but normal folders like 'C:\my data\my own folder\program folder'. I see that for folders created under Win XP I have some user groups that do not exist for 'normal' folders (folders created by me recently under Windows 7). For example, for the Win XP folder I have: Creator owner System Account unknown(S-1-5-21 blablabla... Admins Users For Win7 folders I have: Authenticated users System Admins Users How should I proceed? Should I give the right to the "Users" account to write to XP folders? Should I make the old folders (the XP folders) to have the same groups of users as the normal (Win7) ones by adding the "Authenticated users" account to those folders? Should I delete the "Account unknown" account from my system? (In this case, how?) Many thanks.

  Read the article

• After RAID failure SBS 2008 issues logging in and Exchange store does not mount

  - by Josh R

  today has been one of those days. Yesterday a hard drive in our Dell Poweredge 2900 server failed and the RAID array didn't degrade gracefully, so I called Dell (Server still under warranty) and got an engineer to work though the RAID issues with me. He was a nice guy but didn't do too much. We tried to put the RAID in a state where it was bootable and even though we only lost one disk there are still issues with the server. Once we got the server to boot there was an error message saying that the logonui.exe was corrupted and we needed to run chkdsk. I clicked through the error messages and the login screen never came up. So I power cycled the server and it chkdsk automatically but the login screen didn't appear. I tried safe mode, no difference there either. So the issues I am currently having are: 1) The server boots up, the loading windows screen comes up then it dumps me into a black screen where I can only see my mouse cursor. Ctrl+Esc doesn't work Ctrl+Alt+Del doesn't work 2) Some of the services come up: DHCP, DNS, DFS, and Print come up 3) The exchange information store and transport service don't start - I tried using mmc to connect to services.msc on the computer and start them but they throw an error message of "Can't start because group or dependency failed" Has anyone had a problem like this? Can anyone offer some guidance? Thanks a bunch!

  Read the article

• How to automatically start VM created by virt-manager?

  - by Jeff Shattock

  I have created a virtual machine with virt-manager that runs on kvm/qemu. The machine works well when started through virt-manager. However, I would like to be able to start and stop the VM through a script in init.d, so that it comes up and down along with the host. I need to have virt-manager show that the machine is running, and to be able to connect to its console through there. When I use the command line that is produced by running ps -eaf | grep kvm after starting the vm through virt-manager, I get some console messages about redirected character devices, but the machine does start and runs properly. However, I do not get any indication from virt-manager that it has started. How can I modify the command line to get virt-manager to pick up the running VM? Is there anything else about the command line that should change when starting outside of virt-manager? Command line is (slightly reformatted for readability): /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1 -name BORON \ -uuid fa7e5fbd-7d8e-43c4-ebd9-1504a4383eb1 \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/BORON.monitor,server,nowait \ -monitor chardev:monitor -localtime -boot c \ -drive file=/dev/FS1/BORON,if=ide,index=0,boot=on,format=raw \ -net nic,macaddr=52:54:00:20:0b:fd,vlan=0,name=nic.0 \ -net tap,fd=41,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 \ -parallel none -usb -usbdevice tablet -vnc 127.0.0.1:1 -k en-us -vga cirrus

  Read the article

• Laptop freezing every few seconds, including screen + sound

  - by zenstealth

  Just a few days ago, my Windows 7 HP dv4170us (1.76Ghz CPU, 1GB Ram) laptop started to freeze every other second where everything on screen and and sound (such as a song playing in iTunes) would just freeze until I bash it violently (without actually breaking the laptop) or wait for a couple of more seconds. I think it started one night when I noticed that a USB mouse of mine stopped working, and it displayed random "Device was not recognized" errors. I just unplugged the mouse and ignored it. Skip forward to the next day, is started freezing, and as of today I can't get my computer to not keep freezing. I tried to backup my files onto an external hdd, but it almost corrupted the drive. I ran 4 complete virus scans using MSSE and MalwareBytes (both quick and full scans), and they all came up clean. In the Task manager, the CPU usage is on a constant max, and so is the RAM (if I have just a few apps running, I only have like 30Mb of free RAM left). Also, on the outside of my laptop, right above where the CPU is located, it's very, very hot. I suspect that something is wrong internally within inside of the computer, but I'm not sure. It also does the same thing when booted into Ubuntu.Does anyone know what could be wrong with it?

  Read the article

• How to continue an HTTrack mirroring session from the command line?

  - by isme

  I want to drive my mirroring project using the Command Prompt instead of the WinHTTrack interface so that I can script and schedule the mirroring session more easily. The output of httrack --help gives a simple command for continuing an interrupted mirroring session: example: httrack --continue continues a mirror in the current folder When I try httrack --continue in my HTTrack project folder, all I get is output like this: Example: -%F "<!-- Mirrored from %s by HTTrack Website Copier/3.x [XR&CO'2010], %s -->" * Option %F needs to be followed by a blank space, and a footer string With each parameter on a new line for readability, the first line of my doit.log file looks like this: -qiC1%P0s0b0u1j0%s%u0N0%I0p1DaK0c1T30H0%kf2E1800A25000%c0.1%f#f -F "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)" -%F "" -%l "en, en, *" http://saa.gov.uk/search.php?SEARCHED=1&SEARCH_TABLE=council_tax&SEARCH_TERM=City+of+Edinburgh&DISPLAY_COUNT=100 -O1 "C:\\Users\\Iain\\Projects\\Council Tax Analysis\\Code\\HTTrack\\Council Tax Valuation List" -* \ +*search.php?SEARCHED=1* -*DISPLAY_MODE=FULL* The parameter %F "" should tell HTTrack to use an empty footer. I used the WinHTTrack interface to create the project and start the mirroring session. I can interrupt and continue the mirroring session using the interface. The HTML files saved by WinHTTrack have no footer.

  Read the article

• Safe to remove Python2.6 files?

  - by darkfeline

  I'm using Linux Mint 11 (will upgrade soon), and I've noticed that, even though I don't have any python2.6 packages installed with apt, there's a bunch of residual python2.6 files scattered around my drive, including, but not limited to, dist-packages in /usr/lib/python2.6 and various /usr/share stuff. Is there any way to test if these files are still being used? I'm tempted to sudo rm -rf the lot of them, but I'm scared it'll break stuff. Also, does anyone have any idea where these files could have come from? I believe I had python2.6 installed once upon a time, but I made sure to --purge them, so there shouldn't be any trace of them left, right? EDIT: after using a quick script to check all of the files, it appears most of them belong to important packages, so I won't try weeding out the few which I know are probably useless. Although I am curious why so many packages have python2.6 files when I don't even have it installed. These files are not associated with any packages and I'm not sure if they are safe to remove: /usr/bin/ipython2.6 /usr/lib/python2.6/dist-packages/distribute-0.6.15.egg-info /usr/lib/python2.6/dist-packages/easy_install.py /usr/lib/python2.6/dist-packages/IPython /usr/lib/python2.6/dist-packages/ipython-0.10.1.egg-info /usr/lib/python2.6/dist-packages/setuptools /usr/lib/python2.6/dist-packages/setuptools.egg-info /usr/lib/python2.6/dist-packages/setuptools.pth /usr/lib/python2.6/dist-packages/site.py /usr/lib/python2.6/dist-packages/wx.pth /usr/local/lib/python2.6 /usr/local/lib/python2.6/dist-packages /usr/local/lib/python2.6/site-packages /usr/share/man/man1/ipython2.6.1.gz

  Read the article

• Upgrade or replace?

  - by Felix

  My current PC is about four years old, although I have made upgrades to it throughout its existence. The current specs are: (old) Intel Pentium D 2.80Ghz (32K L1 / 2M L2), Gigabyte 945GCMX-S2 motherboard (old) 2.5GB DDR2 (slot0: 512MB @ 533Mhz; slot1: 2GB @ 667Mhz) (new) HIS Radeon HD 4670 - I think this is limited by the motherboard not supporting PCIe 2.0 (?) (old) WD Caviar 160GB - pretty slow (new) WD Caviar Black 640GB (if any more specs are relevant, let me know and I'll add them) Now, on to my question. I've been having performance issues lately, both in video games and in intensive applications. A couple of examples: Android application development (running Eclipse and the Android emulator) is painfully slow (on Linux). I only realized this when, at my new job as an Android dev, both tools are MUCH quicker. (I'm not sure what CPU I have there) The guys at my new job got me NFS Hot Pursuit, in which I barely get like 5-10FPS, even with graphics options turned all the way down My guess is that the bottleneck in my system is my CPU, so I'm thinking of upgrading to a Quad Core i5 + new motherboard + 4GB DDR3 (or more, 'cause I know you'll all jump and say 8GB minimum). Now: Is that a good idea? Is my CPU really a bottleneck, or is the whole system too old and I should replace it? I run Windows 7 on the old, 160GB HDD (which is on IDE, by the way). Could this slow down games as well? Should I get a new drive for Windows if I want to play new games? I know nothing about power supplies. Could that be a problem / will it be a problem if I upgrade to an i5? How come DiRT2 works on full graphics settings (pretty amazing graphics by the way) and NFS Hot Pursuit pulls only 5-10FPS?

  Read the article

• Windows Server 2008 R2 Standard to Enterprise Problems

  - by boburob

  A few months ago I setup a Citrix XenApp cluster running on Windows Server 2008 R2 Standard Edition using the temporary 180 day license key. Recently the company bought a Windows Server 2008 R2 Enterprise DataCenter license. This means I need to upgrade the Windows edition from Standard to Enterprise. I attach the disk to the VM and start the upgrade process through XenCenter, it runs through all checks and unpacks all Windows files and seems to create a Windows Setup partition, it then reboots and trys to boot into this partition and I get a blue screen telling me to CHKDSK the hard drive with the following error message: STOP: 0x0000007B As XenApp is already setup and working I really do not want to go down the route of rebuilding this server (as I already had to do this once down to issues with XenApp). The server did have 8GB of RAM assigned to it, I have tried reducing this down to 2GB's as I read this can cause an issue. Also I can boot back into the Windows Server 2008 R2 Standard partition without any problems. UPDATE I have managed to get round the urgency by re-arming the license, giving me another 180 day trial..but would be nice to work out why this is happening!

  Read the article

• MySQL Tables Missing/Corrupt After Recreation

  - by Synetech inc.

  Hi, Yesterday I dumped my MySQL databases to an SQL file and renamed the ibdata1 file. I then recreated it and imported the SQL file and moved the new ibdata1 file to my MySQL data directory, deleting the old one. I’ve done it before without issue, however this time something is not right. When I examine the (personal, not MySQL config) databases, they are all there, but they are empty… sort of. The data directory still has the .ibd files with the correct content in them and I can view the table list in the databases, but not the tables themselves. (I have file-per-table enabled, and am using InnoDB as default for everything.) For example with the urls database and its urls table, I can successfully open mysql.exe or phpMyAdmin and use urls;. I can even show tables; to see the expected table, but then when I try to describe urls; or select * from urls;, it complains that the table does not exist (even though it just listed it). (The MySQL Administrator lists the databases, but does not even list the tables, it indicates that the dbs are completely empty.) The problem now is that I have already deleted the SQL file (and cannot recover it even after scouring my hard-drive). So I am trying to figure out a way to repair these databases/tables. I can’t use the table repair function since it complains that the table does not exist, and I can’t dump them because again, it complains that the tables don’t exist. Like I’ve said, the data itself is still present in the .ibd files and the table names are present. I just need a way to get MySQL to recognize that the tables exist in the databases (I can find the column names of the tables in question in the ibdata1 file using a hex-editor). Any idea how I can repair this type of corruption? I don’t mind rolling up my sleeves, digging in, and taking a bunch of steps to fix it. Thanks a lot.

  Read the article

< Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >