Search Results

Search found 22298 results on 892 pages for 'default'.

Page 526/892 | < Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >

• Internal speakers do not work

  - by Nikcefo

  I have a new (from scratch, not update) installation of Ubuntu 12.10 on my notebook, Asus A3Ac (It is based on Intel Centrino - Pentium M with full duplex Intel HDA codec). In older versions of Debian-based systems Intel HDA audio didn't work correctly. Alsamixer display wrong outputs and inputs (more than notebook really have). In clean installations internal speakers were playing, but they didn't mute when headphones was plugged in. There was a solution (propably not the best but working) - edit as root /etc/modprobe.d/alsa-base.conf and add a line "options snd-hda-intel model=z71v position_fix=1". After restart it worked correctly (alsamixer displayed correct devices and internal speakers were muted after I plugged in headphones). It was also working in Ubuntu 12.04. In Ubuntu 12.10 I have another problem. The alsamixer in default (don't have to edit alsa-base.conf) display correct outputs and inputs but internal speakers don't working if the headphones isn't plugged in. I have to manually disable "Auto-Mut" option in alsamixer, then the internal spakers works (but of course they don't mute when the headphones are pluged in). Thanks for any idea how to fix it. I'm not sure if it is a bug or it's caused by a "specific hardware". Tomas

  Read the article

• Optimize Windows file access over network

  - by Djizeus

  At my company I frequently need to access shared files over a Windows network. These files are located on the other side of the planet, so I guess the file share goes through some kind of VPN over Internet, but I don't control this and it is supposed to be "transparent" for me. However it is extremely slow. Displaying the content of a directory in the file explorer takes about 10s. Even if over the Internet, I did not expect that retrieving a list of file names would be that long. Are there any settings to optimize this from my Windows XP workstation, or is it mostly related to the way the network is configured? The only thing I have found so far is to cache all file names, while by default only short file names are cached (http://support.microsoft.com/kb/843418).

  Read the article

• What''s the "earliest" place one can set an environment variable during Linux boot process?

  - by amn

  I know I can set a variable in a shell startup file, but the thing is, I am trying to set up a POSIX-compatible environment, and a POSIX shell does not parse any startup files other than the one specified by the environment variable ENV. This presents a problem - currently my login starts the shell as bash, which I will try to replace with sh so Bash runs as POSIX shell - however then it will not parse the default startup files and I need ENV set to specify these. Which means as far as I understand that I need to specify ENV before login starts the shell, correct? Now, how would I do that? I hope my question is clear, if not I will gladly redact it.

  Read the article

• Make Ms Word activate window of file if it is already open when I double click the file's icon?

  - by barlop

  When I try to open a word document that is already open, I want it to just activate the window where the file is open. How can I do that? sometimes it takes time to check if an ms word document is already open, I don't to have to have to check through a bunch of open word documents to see if it's in there or not, I just want to double click the icon of a word document, and if it's open then go to it, if not then open it. With the doc/docx or shortcut to the doc/docx , I have some files where when I double click , it activates it when already open. I have other files where double clicking will bring up a "file in use" dialog box. I can't find what is the cause. I want it to always activate the window rather than reopen it. update- maybe that is default behaviour to activate when already open, and after a crash I had that stopped. i'll try deleting the working files and starting ms word again, idea from here

  Read the article

• I tried installing Ubuntu 10.04 and I got this message - any ideas on what to do?

  - by user41926

  No root file system defined. Please correct this from the partition menu. This message shows up when I first boot into Ubuntu after the installation. I installed it by mounting the ISO with Daemon Tools, and I just did the default Wubi installation. I keep reading everywhere that I need to choose my installation directory, but I don't get any option to do that. These are all the options I get for installation directory. I have a C and D partition on my drive, and I tried installing it on both and no luck either way. Any ideas?

  Read the article

• Mac OS X change IP configuration automatically by location (by Wifi network)?

  - by Seppo Sade

  Can Mac OS X be setup to automatically configure its Airport interface with a static IP address when connected to a Wifi network with a certain name, and on all other Wifi networks use DHCP? Currently I'm using the "Locations" feature of the "Network" section in System Preferences to manually switch between two IP address setups. I have a "my static IP" setup, and a default "DHCP" setup. However this requires entering System Preferences to change the Location drop-down each time when switching locations. Can this be automated? Preferably this would be done without third-party software.

  Read the article

• Missing files when Windows 7 returns from hibernate w/ dual boot

  - by Arthur N

  I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

  Read the article

• Configure nagios to alert only when there are no mx servers available

  - by Aseques

  In my company there are two redundant MX servers, I would like to tell nagios to wake me in the night ONLY if both servers are down. The default behavior is to alert whenever one of the MX servers is down. I would like to set a timeperiod i.e. 23:00 to 06:00 when nagios only alerts me by sms in case both servers are down. I am using nagios3 but I couldn't find something like this in the docs. Solution: I've used this check_command in a service called MXservice: check_command check_service_cluster!"MXservice"!2!1!$SERVICESTATEID:mx1:SMTP$,$SERVICESTATEID:mx1:SMTP$ Thanks for all your help

  Read the article

• how to override ckeditor events [migrated]

  - by joe

  I am new to ckeditor, I have hard time figuring this issue out. due to my html design; if I try to use the link editor dialog while my ckeditor is maximized, it just doesn't show up, I understand that ckeditor is the top most object in my html page and the link dialog comes underneath it. if now I bring ckeditor to its normal state I will be able to see and use the link dialog. my idea is to slightly override the link button click event as follows: if the editor is in full screen mode, bring it back to the normal state. and keep a flag somewhere so that when I close the link dialog, I can decide whether to bring back the ckeditor to a maximized mode again. now this is easy logic except that I do not know how to override the click event of the link button and keep it work as expected. here's what I have: $().ready(function () { var editor = $('#txa').ckeditor(); CKEDITOR.plugins.registered['link']= { init : function( editor ) { var command = editor.addCommand( 'link', { modes : { wysiwyg:1, source:1 }, exec : function( editor ) { if(editor.commands.maximize.state == 1 ){ alert("maximized"); //....here bring back the editor to UN-maximized state and let the link button event click do the default behavior } else { alert("normal state"); } //2 is normal state //1 is maximized } } ); editor.ui.addButton( 'link',{label : 'YOUR LABEL',command : 'link'}); } } }); html part to make the exemple work: <div> <textarea id="txa"> </textarea> </div> TO BE SHORT: http://jsfiddle.net/Q43QP/ if the editor is maximized, bring it to normal state then show the link dialog.

  Read the article

• Why are prefab customizations being applied to only a single character? [on hold]

  - by m0rgul

  I've built my (networked) game to the point where I have a room, some characters and a character customization screen. In the character customization screen I get to chose gender, chose from three different wardrobe options and assign custom colors to these wardrobe items. Then I use a custom object to store these options, serialize them and store them in PlayerPrefs, then load the next scene and apply them to my chosen character in this scene. Then I go and spawn some more characters, customize them, etc. The problem is that my character is always customized, but all other characters in the scene are default copies of the prefab. The prefabs themselves are a generic male and a generic female, both with three different wardrobes to chose from (they are included in the prefab). When I spawn my character, I go to the saved options in PlayerPrefs, destroy the two discarded wardrobes, apply color to my chosen wardrobe and then spawn the character. How would it be possible to make the other characters also show up in their customized form rather than just the generic prefab (which shows all three wardrobes at the same time)?

  Read the article

• How does one enable --write-mostly with Linux RAID?

  - by user76871

  Unfortunately the mdadm and mdadm.conf man pages are not quite up to par. I would like to enable the --write-mostly flag for my RAID, but neither the man pages nor the internet will tell me how. I am not aware of any place to put default arguments for mdadm, nor aware of when it would be launched and by what. It seems the logical place to add this information is mdadm.conf, but the flag is unmentioned in man mdadm.conf. Where and how can I enable --write-mostly? Thank you.

  Read the article

• MadMACs is attempting to run after wifi autoconnect in Windows 7

  - by Dan

  I have been trying to get MadMACs to run on startup with my Win 7 x64 install. I've used the default registry startup option that is built into the script, but when I startup wlan0 is not randomized, and, in fact, the popup asking whether I want to allow the program to modify my machine comes up after WiFi connection (and obviously before the script has run). I would really like to get this working, but I'm at a dead end. Googling has not returned anything useful so any nudges in the right direction would be appreciated!

  Read the article

• how to communicate in typical router switch router scenario?

  - by Kossel

  I'm learning routing using packet tracer simulation and I think this is a very commun scenario: let's say pc4 is the server... why I can't ping from PC1 to 192.168.2.253 (router1) but I can ping 192.168.2.2 (pc0) aren't they the same subnet? what am I missing or have to do in order to reach pc4? (192.168.100.254) from pc 1 (192.168.1.1) is there something like "default gateway" for router? thanks for advice PS: during the simulation it shows error "The routing table does not have a route to the destination IP address. The router drops the packe (from 192.168.2.253 to 192.168.1.1)"

  Read the article

• itunes equalizer per track settings

  - by DA

  I'm a little confused about iTune's ability to set eq presets on a per-song basis. I have a song that I open, set to a given EQ preset, then close. When I play this song, however, the audio isn't being adjusted. If I open the EQ and turn it 'on', though, it then obeys the song's eq setting. Of course, if I leave the EQ on, then songs that do not have their own EQ setting default to whatever the EQ was originally set at. Not a HUGE deal, but it means that I would then normally have to have EQ always turned on, set to flat, so that any song that I HAVE given a EQ setting to will use it. Am I understanding how that works correctly? Is there a way to have individual songs use their EQ setting without having to turn on the EQ for everything?

  Read the article

• Strategy to store/average logs of pings

  - by José Tomás Tocino

  I'm developing a site to monitor web services. The most basic type of check is sending a ping, storing the response time in a CheckLog object. By default, PingCheck objects are triggered every minute, so in one hour you get 60 CheckLogs and in one day you get 1440 CheckLogs. That's a lot of them, I don't need to store such level of detail, so I've set a up collapsing mechanism that periodically takes the uncollapsed CheckLogs older than 24h and collapses (averages) them in intervals of 30 minutes. So, if you have 360 CheckLogs that have been saved from 0:00 to 6:00, after collapsing you retain just 12 of them. The problem.. well, is this: After averaging the response times, the graph changes drastically. What can I do to improve this? Guess one option could be narrowing the interval duration to 15 min. I've seen the graphs at the GitHub status page and they do not seem to suffer from this problem. I'd appreciate any kind of information you could give me about this area.

  Read the article

• Moving cpanel backup of magento site to VPS

  - by user2564024

  I was having my site in shared hosting, I took the entire backup, its structure is like addons homedir mysql resellerpackages suspendinfo bandwidth homedir_paths mysql.sql sds userconfig counters httpfiles mysql-timestamps sds2 userdata cp locale nobodyfiles shadow va cron logaholic pds shell vad digestshadow logs proftpdpasswd ssl version dnszones meta psql sslcerts vf domainkeys mm quota ssldomain fp mma resellerconfig sslkeys has_sslstorage mms resellerfeatures suspended Now I have subscribed to vps, I have copied the files inside homedir/public_html to var/www/html of my new hosting, but am seeing the following error when I view it browser, There has been an error processing your request Exception printing is disabled by default for security reasons. Error log record number: 259343920016 I have just created database with name magenhto inside mysql. Previously I had cpanel and used one click installer. Hence am not aware of how to use that data inside mysql to this new system and are there any more changes.

  Read the article

• Can files deleted on an ecnrypted drive be restored?

  - by roddik

  Hi. There are ways to restore files, deleted from the system by default, I'm not sure about the way they work but I guess thet read content, that has not been overwritten. On the other hand, there are programs (e.g. TrueCrypt), that encrypt disks, claiming that it wouldn't be possible to tell apart random data and file contents on such a disk without a password. Therefore I think that files, deleted from such disks can't be restored. Is that correct? I know one way to find out would be to try it, but there is a possibility, that I would just pick the wrong restoring software. Moreover, I'm more interested in theorethical explanation why it would/wouldn't be possible. Thanks

  Read the article

• Configurarion of Alert on Windows Server 2003

  - by Ferre06

  I'm trying to configure an alert on low space on disk in Windows Server 2003, I already followed this step by step tutorial of microsoft. I try to execute a bat file created by me, located on the home folder of the user I'm using. I seted to trigger when the free space is below 6 GB when the disk have lower free space than 6 GB, the "Sample data interval" is the default (5 seconds). The problem is that the alert isnt triggered. And another thing, the user that is seted for the alert isnt the root user, but It have administration privileges. Thanks in advance

  Read the article

• Laptop connectd to 2 VPNs (1st for Internet over WiFi, 2nd to access shared folders on another network) is failing to route traffic over 2nd VPN

  - by Triynko

  I set up a VPN on Windows Server 2008 through its routing and remote access services. I connected to the VPN, and configured the client to allow for split tunneling (Internet traffic goes to my default gateway, and traffic directed to the VPN server goes through the VPN gateway). I had to adjust the routing table, adding an entry to ensure traffic to my VPN server goes through the tunnel by running the command "route add [VPN.IP] mask 255.255.255.255 [VPN.GATEWAY.IP] IF [VPN_INTERFACE_#]". Adding the correct route makes everything work flawlessly on all my machines, except for one. The problematic machine is a laptop that's not directly connected to a network. It connects to WiFi, and then connects to a VPN to obtain internet access. Finally, it connects to the target VPN server for file sharing. The "route add" trick doesn't work for that laptop, I'm assuming because it's connected to two VPNs, and I'm getting the routing wrong. Can anyone familiar with routing explain what routes I may need to add?

  Read the article

• How to stop any dialog windows from showing when inserting a USB drive in Windows?

  - by jasondavis

  1) I just found a really interesting program that allows me to use a USB drive as a windows login key. It is called Rohos Logon Key. IF I remobve my USB drive/key from the PC then I can have the PC lock or hibernate or any other option, I have been looking for such a solution for many years but never knew one existed until this and it works much better then I imagined. I do have a couple minor issues though (im using Windows 7 pro). When I remove and then re-insert my USB key, windows prompts me with this dialog here... Generally when I get this I just click on "Continue without scanning" however I am looking for a solution to just make it not even show this at all, is it possible to disable it from showing? 2) I also get this dialog as well when I insert USB drives/key... Would it be possible to not show this as well or have it pick an option by default or anything really?

  Read the article

• Recommended display/background brightness ratio and UI color schemes [duplicate]

  - by user1306322

  This question already has an answer here: Colour scheme for editor - guidelines or medical reccomendations 3 answers I'm a professional programmer, which means I spend a lot of time staring at various displays. Recently I've been having some problems with my eyes, so I went to talk to several doctors, which all gave me different recommendations as to how bright the background of the room should be in comparison to the display's brightness. It was very confusing, as some of them even agreed with counter-arguments of others, which made it all even less clear. So I'd like to ask the professional programmers, as people who actually have some experience with that. Some of the doctors said that looking at a monitor is like looking at a book, so the brightness ratios should be approximately the same. Others said that background should be as bright as the display itself, because then there is no brightness difference at the edges, and that's what may cause eye fatigue. From my own experience, I can say that reading a book isn't the same as writing or debugging a program, where you have to pay close attention to each symbol, and in books most words are easily recognizable without focusing too hard on them. Also, books are black on white and I myself use the default (dark text, white bg) color scheme for my IDE, but I've seen some programmers use mid-bright text on very dark background color schemes. So I'd like to ask what are the recommended display/background brightness ratios for programming? I'm not sure this site is the right one for this kind of questions, so if you know a better one, please comment.

  Read the article

• Lightest way to run Google Hangouts Chrome app on Mac

  - by jadengore

  I recently transitioned to Safari because I'm really tired of how Chrome hogs memory and drains my battery like crazy. The only thing that has been keeping the Chrome icon open is the Hangouts plugin. Basically, I am looking for the lightest way to run Hangouts on my Mac. By light, I mean the least amount of RAM usage, and preferably a way to do it without Chrome open/light version of Chrome that only opens extensions. Any suggestions? EDIT: Another thing I noticed was that Hangouts ignores your default browser if links are sent to you by chat, and when clicked they open in Chrome. My question doesn't relate to this at all, but I found it interesting...

  Read the article

• Redirecting output to email

  - by Alpha

  I am aware that in Windows you can use the following snippet to redirect the output of a command line tool to the clipboard: mytool | clip Also, it can be done with files: clip < myFile.txt I also know Windows has several other devices you can use as output / input for these redirections (probably the printer is the most famous of them). However, is there something to send the text to the default email program? I would love to find that there is something like: mytool | email. Is there something alike?

  Read the article

• Time Capsule + Ubee Router?

  - by Charlie

  I can't for the life of me figure this out. I recently had TWC installed in my house, and wanted to disable the NAT and router functions of it. I have a Time Capsule hooked up to it from LAN1 (on the Ubee) to the WAN port on the TC. The problems started occurring here. I figured the settings would be these: Ubee Configuration mode: Bridge DHCP: Off TC IPv4: 192.168.100.2 Subnet Mask: 255.255.255.0 Router Address: 192.168.100.1 DNS Servers: 8.8.8.8, 8.8.4.4 Router Mode: DHCP and NAT But using those settings, my TC says "Double NAT", so I have to change it all around to the default settings of the Ubee using NAT. This leads me to believe bridge mode doesn't actually turn off NAT...

  Read the article

• DVD/CD-ROM drives stop working in Windows 7

  - by Marcus L

  All of a sudden Windows 7 (64 bit) lost all DVD and CD-ROM drives. It worked fine for about a month, then I don't know what happened. At first I thought it was a hardware problem - that my DVD-ROM had malfunctioned. But then I realized that Windows 7 no longer picked up on Demon Tools drives either. I can boot both Windows installation and Knoppix from the DVD-drive. So it seems to be a general problem with "disc-media". When trying to reinstall the hardware DVD-ROM Windows recognizes the drive (though sometimes simply label it as "CD-ROM drive"), but then says something went wrong - with from what I understand is a default error message (39), claiming the driver has become corrupt. I've tried every Microsoft recommended action, i.e. uninstall, reinstall, look for driver updates etc. etc., but with no luck. Any tip most welcome!

  Read the article

< Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >