Search Results

Search found 29235 results on 1170 pages for 'event driven design'.

Page 526/1170 | < Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >

  • Resolving System Restore error - Error 0x800423F3 - The writer experienced a transient error

    - by Gishu
    System restore just stopped working, when I needed it most. (tried diff restore points... same error). Now everytime I run system-restore, it fails with the above error message. I cleared the event logs and retried to isolate the relevant events. I see 5 warnings and 1 info event from VSS and 1 error from System Restore. Here's the first warning from VSS and the error http://dl.dropbox.com/u/11733224/SystemRestore-FirstWarning.txt http://dl.dropbox.com/u/11733224/SystemRestore-FirstError.txt Tried a lot of stuff, but in vain; this error still persists.

    Read the article

  • Unexpected server restart - Windows 2003 SP2 fully patched

    - by PCTech
    I'm having problems with a server that has been restarting itself randomly for the past 3 months. The server is windows 2003 with SP2 Domain Controller and it is fully patched. I have seen the following errors in event log: Source: USER32 Category: None Type: Information Event ID: 1074 User: Domain\Administrator The process winlogon.exe has initiated the restart of computer (server name) on behalf of user domainname\Administrator for the following reason: No title for this reason could be found Reason Code: 0x840000ff Shutdown Type: restart I have ran out of ideas as to what might be causing this issue. The system is clean and not infected. There are no scheduled tasks responsible for the restart either. I'm considering moving the backup (Backup Exec 12.5) to a different server but I'm almost certain that this is not the issue as the restart times vary and do not match the scheduled backup jobs. Any suggestions to help me resolve this issue would be appreciated, thanks.

    Read the article

  • Silverlight Cream for April 07, 2010 -- #833

    - by Dave Campbell
    In this Issue: Alan Mendelevich, Siyamand Ayubi, Rudi Grobler(-2-), Josh Smith, VinitYadav, and Dave Campbell. Shoutouts: Jordan Knight has a demo up of a project he did for DigiGirlz: DigiGirlz, Deep Zoom and Azure, hopefully we'll get source later :) Jeremy Likness has a must-read post on his Ten Reasons to use the Managed Extensibility Framework I put this on another post earlier, but if you want some desktop bling for WP7, Ozymandias has some: I Love Windows Phone Wallpaper If you're not going to be in 'Vegas next week, Tim Heuer reminds us there's an alternative: Watch the Silverlight 4 Launch event and LIVE QA with ScottGu and others From SilverlightCream.com: Ghost Lines in Silverlight Alan Mendelevich reports an issue when drawing lines with odd coordinate values. He originated it in Silverlight 3, but it is there in SL4RC as well... check it out and leave him a comment. A Framework to Animate WPF and Silverlight Pages Similar to the PowerPoint Slides Siyamand Ayubi has an interesting post up on animating WPF or Silverlight pages to make them progress in the manner of a PPT slideshow. And it can also make phone calls… Rudi Grobler has a list of 'tasks' you can do with WP7 such as PhoneCallTask or EmailComposeTask ... looks like this should be plasticized :) Using the GPS, Accelerometer & Vibration Controller Rudi Grobler is also investigating how to use the GPS, Accelerometer, and Vibration in WP7 with a bunch of external links to back it up. Assembly-level initialization at design time Josh Smith has a solution to the problem of initializing design-time data in Blend (did you know that was an issue?) ... the solution is great and so is the running commentary between Josh and Karl Shifflett in the comments! ySurf : A Yahoo Messenger Clone built in Silverlight VinitYadav built a Yahoo Messenger app in Silverlight and has detailed out all the ugly bits for us on the post, plus made everything available. Your First Silverlight Application Dave Campbell's first post at DZone cracking open a beginner's series on Silverlight. If you're expecting something heavy-duty, skip this. If you're wanting to learn Silverlight and haven't jumped in yet, give it a try. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • MOSS 2007 SP2 - Error while provisioning SSP.

    - by Tim
    This is a brand new installation I am trying to provision the first SSP for MOSS and I keep getting the following error: (Provisioning failed: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)) The error also keeps appearing in the Application Event Log as event ID 7888. Google searches tell me its a connection between the Sharepoint server and the SQL server however, this is a production SQL Server which has several databases on it that do not experience any problems. These databases also include the Central Admin and Web Application databases for Sharepoint which are all working fine. Any guidance would be greatly appreciated. Thanks in advance.

    Read the article

  • Metro: Query Selectors

    - by Stephen.Walther
    The goal of this blog entry is to explain how to perform queries using selectors when using the WinJS library. In particular, you learn how to use the WinJS.Utilities.query() method and the QueryCollection class to retrieve and modify the elements of an HTML document. Introduction to Selectors When you are building a Web application, you need some way of easily retrieving elements from an HTML document. For example, you might want to retrieve all of the input elements which have a certain class. Or, you might want to retrieve the one and only element with an id of favoriteColor. The standard way of retrieving elements from an HTML document is by using a selector. Anyone who has ever created a Cascading Style Sheet has already used selectors. You use selectors in Cascading Style Sheets to apply formatting rules to elements in a document. For example, the following Cascading Style Sheet rule changes the background color of every INPUT element with a class of .required in a document to the color red: input.red { background-color: red } The “input.red” part is the selector which matches all INPUT elements with a class of red. The W3C standard for selectors (technically, their recommendation) is entitled “Selectors Level 3” and the standard is located here: http://www.w3.org/TR/css3-selectors/ Selectors are not only useful for adding formatting to the elements of a document. Selectors are also useful when you need to apply behavior to the elements of a document. For example, you might want to select a particular BUTTON element with a selector and add a click handler to the element so that something happens whenever you click the button. Selectors are not specific to Cascading Style Sheets. You can use selectors in your JavaScript code to retrieve elements from an HTML document. jQuery is famous for its support for selectors. Using jQuery, you can use a selector to retrieve matching elements from a document and modify the elements. The WinJS library enables you to perform the same types of queries as jQuery using the W3C selector syntax. Performing Queries with the WinJS.Utilities.query() Method When using the WinJS library, you perform a query using a selector by using the WinJS.Utilities.query() method.  The following HTML document contains a BUTTON and a DIV element: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>Application1</title> <!-- WinJS references --> <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script> <!-- Application1 references --> <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> </head> <body> <button>Click Me!</button> <div style="display:none"> <h1>Secret Message</h1> </div> </body> </html> The document contains a reference to the following JavaScript file named \js\default.js: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { WinJS.Utilities.query("button").listen("click", function () { WinJS.Utilities.query("div").clearStyle("display"); }); } }; app.start(); })(); The default.js script uses the WinJS.Utilities.query() method to retrieve all of the BUTTON elements in the page. The listen() method is used to wire an event handler to the BUTTON click event. When you click the BUTTON, the secret message contained in the hidden DIV element is displayed. The clearStyle() method is used to remove the display:none style attribute from the DIV element. Under the covers, the WinJS.Utilities.query() method uses the standard querySelectorAll() method. This means that you can use any selector which is compatible with the querySelectorAll() method when using the WinJS.Utilities.query() method. The querySelectorAll() method is defined in the W3C Selectors API Level 1 standard located here: http://www.w3.org/TR/selectors-api/ Unlike the querySelectorAll() method, the WinJS.Utilities.query() method returns a QueryCollection. We talk about the methods of the QueryCollection class below. Retrieving a Single Element with the WinJS.Utilities.id() Method If you want to retrieve a single element from a document, instead of matching a set of elements, then you can use the WinJS.Utilities.id() method. For example, the following line of code changes the background color of an element to the color red: WinJS.Utilities.id("message").setStyle("background-color", "red"); The statement above matches the one and only element with an Id of message. For example, the statement matches the following DIV element: <div id="message">Hello!</div> Notice that you do not use a hash when matching a single element with the WinJS.Utilities.id() method. You would need to use a hash when using the WinJS.Utilities.query() method to do the same thing like this: WinJS.Utilities.query("#message").setStyle("background-color", "red"); Under the covers, the WinJS.Utilities.id() method calls the standard document.getElementById() method. The WinJS.Utilities.id() method returns the result as a QueryCollection. If no element matches the identifier passed to WinJS.Utilities.id() then you do not get an error. Instead, you get a QueryCollection with no elements (length=0). Using the WinJS.Utilities.children() method The WinJS.Utilities.children() method enables you to retrieve a QueryCollection which contains all of the children of a DOM element. For example, imagine that you have a DIV element which contains children DIV elements like this: <div id="discussContainer"> <div>Message 1</div> <div>Message 2</div> <div>Message 3</div> </div> You can use the following code to add borders around all of the child DIV element and not the container DIV element: var discussContainer = WinJS.Utilities.id("discussContainer").get(0); WinJS.Utilities.children(discussContainer).setStyle("border", "2px dashed red");   It is important to understand that the WinJS.Utilities.children() method only works with a DOM element and not a QueryCollection. Notice that the get() method is used to retrieve the DOM element which represents the discussContainer. Working with the QueryCollection Class Both the WinJS.Utilities.query() method and the WinJS.Utilities.id() method return an instance of the QueryCollection class. The QueryCollection class derives from the base JavaScript Array class and adds several useful methods for working with HTML elements: addClass(name) – Adds a class to every element in the QueryCollection. clearStyle(name) – Removes a style from every element in the QueryCollection. conrols(ctor, options) – Enables you to create controls. get(index) – Retrieves the element from the QueryCollection at the specified index. getAttribute(name) – Retrieves the value of an attribute for the first element in the QueryCollection. hasClass(name) – Returns true if the first element in the QueryCollection has a certain class. include(items) – Includes a collection of items in the QueryCollection. listen(eventType, listener, capture) – Adds an event listener to every element in the QueryCollection. query(query) – Performs an additional query on the QueryCollection and returns a new QueryCollection. removeClass(name) – Removes a class from the every element in the QueryCollection. removeEventListener(eventType, listener, capture) – Removes an event listener from every element in the QueryCollection. setAttribute(name, value) – Adds an attribute to every element in the QueryCollection. setStyle(name, value) – Adds a style attribute to every element in the QueryCollection. template(templateElement, data, renderDonePromiseContract) – Renders a template using the supplied data.  toggleClass(name) – Toggles the specified class for every element in the QueryCollection. Because the QueryCollection class derives from the base Array class, it also contains all of the standard Array methods like forEach() and slice(). Summary In this blog post, I’ve described how you can perform queries using selectors within a Windows Metro Style application written with JavaScript. You learned how to return an instance of the QueryCollection class by using the WinJS.Utilities.query(), WinJS.Utilities.id(), and WinJS.Utilities.children() methods. You also learned about the methods of the QueryCollection class.

    Read the article

  • lsyncd + csync2 : cluster of 3 or more nodes

    - by sbrattla
    I've got 3 (and potentially more) web servers hosting the same content (fronted by a load balancer). Thus, I need to make sure that files on these web servers are the same. It appears that csync2 in combination with lsyncd is able to do synchronize a cluster of nodes, but according to this article there's a problem with cyclic events in such a setup. In other words, the author writes that a file change on one machine would trigger a replication event to other machines, which again would trigger a replication event back to the original machine. It appears that this is a consequence of the setup which uses lsyncd (and inotify) to catch file modification events and from there trigger csync2 to replicate the file tree. Does anyone have experience with lsyncd in combination with csync2. Have you had trouble with cyclic events?

    Read the article

  • Professional Flash Designers for Flash Designs

    When did you hear about Flash first? Could you exactly remember the time when you happened to talk about those exciting Flash games or Flash movie files with your friends? Well, Flash has been in the... [Author: David Jackson - Web Design and Development - August 31, 2009]

    Read the article

  • Does a manually initiated crash (bugcheck 0xdeaddead) trigger a disk-check?

    - by Synetech
    Windows has an advanced function built-in that lets a user manually initiate a BSOD. It is a debugging tool used to halt the system in the event of (though not necessarily limited to) a hang or freeze. When used, it causes a BSOD with the string MANUALLY_INITIATED_CRASH1 and whimsical code 0xDEADDEAD. The point to this crash is that it is purposely done by the user, so it is not (or at least should not) be an unpredictable event caused by hardware errors or bad drivers (at least not necessarily bad drivers). The question then is whether performing a manual crash properly flushes the disk caches and such so that the drive is in a valid state when rebooting and thus forgoing the need to have chkdsk run.

    Read the article

  • Agile Testing Days 2012 – Day 1 – The birth of the #unicorn…

    - by Chris George
    Still riding the high from the tutorial day, I arrived at the conference venue eager to get cracking with the days talks. The opening Keynote was “Disciplined Agile Delivery: The Foundation for Scaling Agile” presented by Scott Ambler. The general ideas behind the methodology such as not re-inventing the wheel, and being goal driven, not prescriptive in how you work certainly struck chords with how we are trying to work in my team. Scott made some interesting observations about how scrum is quite prescriptive and is this really agile? I agreed with quite a few of his points on how what works for one team may not work for another. How a team works should be driven by context and reflection, not process and prescription. However was somewhat dubious about some of the statistics he rolled out towards the end. However, out of this keynote was born something that was to transcend this one presentation. During the talk, Scott mentioned on more than one occasion “In the real world”, and at one point made reference to people living in the land of unicorns and rainbows. The challenge was then laid down on twitter for all speakers to include a unicorn in their presentations… and for the most part this happened! It became an identity for this years conference, and I’m sure something that any attendee will always associate with Agile Testing Days 2012! Following this keynote, I attended “Going agile with Automated GUI Testing – Some personal insights” by Jan Zdunek from codecentric on the vendor track. My speciality is test automation, and in particular GUI testing, so this drew me to this talk more than the others. Thankfully, it was made clear from the very start that this was not peddling any particular product (even though it was on the vendor track), and Jan faithfully stuck to that. Most of the content was not new to me, but it was really comforting to hear someone else with very similar experiences to my own. In particular, things like how GUI testing is hard and is not a silver bullet; how record & replay is NOT a good thing to do (which drew a somewhat inflammatory tweet from an automation company when I tweeted that!). Something that I have started hearing around the place, and has certainly been murmuring at work is to push more of the automation coding onto the developers. After all they are the coding experts. I agree with this to a degree, but I personally enjoy coding and find it very rewarding doing so, therefore I’d be reluctant to give it up. I think there are some better alternatives such as pairing with a developer. Lastly, Jan mentioned, almost in passing, that we should consider virtualisation for gui testing for covering configuration combinations. On my project we’ve been running our win32/.NET GUI tests in cloud virtualisation for a couple of years now… I really should write about that! After lunch the second keynote of the day was by Lisa Crispin and Janet Gregory,”Myths about Agile Testing, De-Bunked”. It started off well… with the two ladies donning Medusa style head bands whilst they disbanding several myths about agile testing! I got the impression that it was perhaps not as slick as they would have liked, but then Janet was suffering with a very sore throat so kept losing her voice. Nevertheless, the presentation was captivating, and they debunked several myths such as : “Testing is dead”, “Testers must write code”, “Agile teams always deliver faster”. I didn’t take many notes for this because it was being recorded, but unfortunately the recordings have not been posted yet so I’ll write more about this when they are. The TestLab was held during a somewhat free for all time during most of the afternoon. It looked intriguing and proved to be one of the surprising experiences of the conference for me. Run by James Lyndsay and Bart Knaack, it consisted of a number of ‘stations’ that offered different testing problems. I opted for testing a mathematical drawing app call Geogebra, the task being to pair up and exploratory test it. After an allotted time, we discussed issues we’d found and decided if we wanted to continue ‘playing’ to which we all agreed! It was fun! The last track talk of the day was “Developers Exploratory Testing – Raising the bar” by Sigge Birgisson. One of the teams at Red Gate have tried Dev or Team exploratory testing a couple of times, and I was really interested to go to the presentation that prompted that. I was not disappointed! Sigge gave a first class presentation, and not only explained what DET was all about, but also how to go about implementing it. Little tips like calling it a ‘workshop’ rather than ‘testing’ I can really see working! Monday evening saw the presentation of the award for the Most Influential Agile Testing Professional Person go to a much deserved Lisa Crispin. The evening was great, with acrobatics, magic and music. My Takeaway Triple from Day 1:  Some of the cool stuff that was suggested in the GUI Testing talk, we are already doing. I should write about that! Testing is not dead! Perhaps testing will become more of a skill than a specific role, but it is certainly not dead. Team/Developer exploratory testing… seems like a no-brainer assuming you have a team who is willing.  Day 2 – Coming soon…

    Read the article

  • Oracle B2B 11g - Transport Layer Acknowledgement

    - by Nitesh Jain Oracle
    In Health Care Industry,Acknowledgement or Response should be sent back very fast. Once any message received, Acknowledgement should be sent back to TP. Oracle B2B provides a solution to send acknowledgement or Response from transport layer of mllp that is called as immediate acknowledgment. Immediate acknowledgment is generated and transmitted in the transport layer. It is an alternative to the functional acknowledgment, which generates after processing/validating the data in document layer. Oracle B2B provides four types of immediate acknowledgment: Default: Oracle B2B parses the incoming HL7 message and generates an acknowledgment from it. This mode uses the details from incoming payload and generate the acknowledgement based on incoming HL7 message control number, sender and application identification. By default, an Immediate ACK is a generic ACK. Trigger event can also sent back by using Map Trigger Event property. If mapping the MSH.10 of the ACK with the MSH.10 of the incoming business message is required, then enable the Map ACK Control ID property. Simple: B2B sends the predefined acknowledgment message to the sender without parsing the incoming message. Custom: Custom immediate Ack/Response mode gives a user to define their own response/acknowledgement. This is configurable using file in the Custom Immediate ACK File property. Negative: In this case, immediate ACK will be returned only in the case of exceptions.

    Read the article

  • Adding an expression based image in a client report definition file (RDLC)

    - by rajbk
    In previous posts, I showed you how to create a report using Visual Studio 2010 and how to add a hyperlink to the report.  In this post, I show you how to add an expression based image to each row of the report. This similar to displaying a checkbox column for Boolean values.  A sample project is attached to the bottom of this post. To start off, download the project we created earlier from here.  The report we created had a “Discontinued” column of type Boolean. We are going to change it to display an “available” icon or “unavailable” icon based on the “Discontinued” row value.    Load the project and double click on Products.rdlc. With the report design surface active, you will see the “Report Data” tool window. Right click on the Images folder and select “Add Image..”   Add the available_icon.png and discontinued_icon.png images (the sample project at the end of this post has the icon png files)    You can see the images we added in the “Report Data” tool window.   Drag and drop the available_icon into the “Discontinued” column row (not the header) We get a dialog box which allows us to set the image properties. We will add an expression that specifies the image to display based the “Discontinued” value from the Product table. Click on the expression (fx) button.   Add the following expression : = IIf(Fields!Discontinued.Value = True, “discontinued_icon”, “available_icon”)   Save and exit all dialog boxes. In the report design surface, resize the column header and change the text from “Discontinued” to “In Production”.   (Optional) Right click on the image cell (not header) , go to “Image Properties..” and offset it by 5pt from the left. (Optional) Change the border color since it is not set by default for image columns. We are done adding our image column! Compile the application and run it. You will see that the “In Production” column has red ‘x’ icons for discontinued products. Download the VS 2010 sample project NorthwindReportsImage.zip Other Posts Adding a hyperlink in a client report definition file (RDLC) Rendering an RDLC directly to the Response stream in ASP.NET MVC ASP.NET MVC Paging/Sorting/Filtering using the MVCContrib Grid and Pager Localization in ASP.NET MVC 2 using ModelMetadata Setting up Visual Studio 2010 to step into Microsoft .NET Source Code Running ASP.NET Webforms and ASP.NET MVC side by side Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework

    Read the article

  • Exchange 2010 to Exchange 2010 Public Folder Replication

    - by Archit Baweja
    We have 2 exchange servers in our org. MX1 and MX2. I'm trying to replicate all MX1 public folders to MX2. I've setup replication for all the toplevel folders to include the MX2 server. However no public folders are being replicated. The event log does not show any errors. I've set the diagnostic level for all public folder diagnostics to Highest using get-eventloglevel "MSExchangeIS\9001 Public\*" | set-eventloglevel -Level Expert However besides a 3092 event ID (type: 0x2) generated on MX1 (the source server), there are no events being generated that would notify me of any issues. Some technical details. MX1 is Windows 2008 Standard, MX2 is Windows 2008 Enterprise (eval mode right now).

    Read the article

  • HPC Server Dynamic Job Scheduling: when jobs spawn jobs

    - by JoshReuben
    HPC Job Types HPC has 3 types of jobs http://technet.microsoft.com/en-us/library/cc972750(v=ws.10).aspx · Task Flow – vanilla sequence · Parametric Sweep – concurrently run multiple instances of the same program, each with a different work unit input · MPI – message passing between master & slave tasks But when you try go outside the box – job tasks that spawn jobs, blocking the parent task – you run the risk of resource starvation, deadlocks, and recursive, non-converging or exponential blow-up. The solution to this is to write some performance monitoring and job scheduling code. You can do this in 2 ways: manually control scheduling - allocate/ de-allocate resources, change job priorities, pause & resume tasks , restrict long running tasks to specific compute clusters Semi-automatically - set threshold params for scheduling. How – Control Job Scheduling In order to manage the tasks and resources that are associated with a job, you will need to access the ISchedulerJob interface - http://msdn.microsoft.com/en-us/library/microsoft.hpc.scheduler.ischedulerjob_members(v=vs.85).aspx This really allows you to control how a job is run – you can access & tweak the following features: max / min resource values whether job resources can grow / shrink, and whether jobs can be pre-empted, whether the job is exclusive per node the creator process id & the job pool timestamp of job creation & completion job priority, hold time & run time limit Re-queue count Job progress Max/ min Number of cores, nodes, sockets, RAM Dynamic task list – can add / cancel jobs on the fly Job counters When – poll perf counters Tweaking the job scheduler should be done on the basis of resource utilization according to PerfMon counters – HPC exposes 2 Perf objects: Compute Clusters, Compute Nodes http://technet.microsoft.com/en-us/library/cc720058(v=ws.10).aspx You can monitor running jobs according to dynamic thresholds – use your own discretion: Percentage processor time Number of running jobs Number of running tasks Total number of processors Number of processors in use Number of processors idle Number of serial tasks Number of parallel tasks Design Your algorithms correctly Finally , don’t assume you have unlimited compute resources in your cluster – design your algorithms with the following factors in mind: · Branching factor - http://en.wikipedia.org/wiki/Branching_factor - dynamically optimize the number of children per node · cutoffs to prevent explosions - http://en.wikipedia.org/wiki/Limit_of_a_sequence - not all functions converge after n attempts. You also need a threshold of good enough, diminishing returns · heuristic shortcuts - http://en.wikipedia.org/wiki/Heuristic - sometimes an exhaustive search is impractical and short cuts are suitable · Pruning http://en.wikipedia.org/wiki/Pruning_(algorithm) – remove / de-prioritize unnecessary tree branches · avoid local minima / maxima - http://en.wikipedia.org/wiki/Local_minima - sometimes an algorithm cant converge because it gets stuck in a local saddle – try simulated annealing, hill climbing or genetic algorithms to get out of these ruts   watch out for rounding errors – http://en.wikipedia.org/wiki/Round-off_error - multiple iterations can in parallel can quickly amplify & blow up your algo ! Use an epsilon, avoid floating point errors,  truncations, approximations Happy Coding !

    Read the article

  • Windows 7 Complete PC Backup - Fails with error code: 0x80070002

    - by leeand00
    While doing a Complete PC Backup in Windows 7 I received dialog reading: Windows Backup...error The backup did not complete successfully. Open the Backup and Restore Control Panel to view settings From there I clicked the Options button. Windows Backup: Troubleshooting Options Check your backup Windows Backup encountered invalid MediaID.bin file on the drive where the backup is saved. Restore from a different backup or delete the MediaID.bin file and try to create another backup. The MediaID.bin file can be found under \MediaID.Bin & \\MediaId.Bin. I deleted the file in question (MediaID.bin) from X:\ (one of the drives being backedup( and tried the backup again. Next I was presented with a dialog that read: Windows Backups: Troubleshooting Options Check your backup The system connot find the file specified. Try to run backup again Change backup settings Backup Time: 2/10/2010 12:17 PM Backup location: FreeAgent Drive (E:) Error code: 0x80070002 Additionally I checked the error log and I found this: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Windows Backup" /> <EventID Qualifiers="0">4104</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-10T17:17:48.000000000Z" /> <EventRecordID>5107</EventRecordID> <Channel>Application</Channel> <Computer>leeand00-PC</Computer> <Security /> </System> - <EventData> <Data>The system cannot find the file specified. (0x80070002)</Data> <Binary>02000780E30500003F0900005B090000420ED1665C2BEE174B64529CB14610EA71000000</Binary> </EventData> </Event> Viewed the following document: http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx searched for 0x80070002 and tried and follow the directions... I noticed that none of the profiles was missing a ProfileImagePath, I also noticed that the people commenting on the page said that they weren't missing it either. I'm currently trying the backup again, but this time I unchecked all of the user's profiles and opted only to backup the two drives X: and C: on to E:\ I'll let you know what happens. Any ideas?

    Read the article

  • Are You "INFOCUS"? We are!

    - by user709270
    The JD Edwards team is looking forward to participating in JD Edwards INFOCUS, the inaugural JD Edwards EnterpriseOne deep dive conference from Quest International Users Group. We've worked diligently with the leadership of Quest’s JD Edwards Special Interest Groups (SIGs) and Regional User Groups (RUGs) to make sure this national user event delivers JD Edwards content that meets the needs of the community. Plus, this event is being held right in JD Edwards’ backyard… Denver (Broomfield), Colorado! JD Edwards INFOCUS will be held November 7-9 at the Omni Interlocken Resort. Through our Product Strategy, Development and Support teams, Oracle will provide support for education sessions in these key tracks: · HCM · Financials · Manufacturing and Distribution · Real Estate Industry Forum · Supply Chain · Tools & Technology Oracle will host a JD Edwards EnterpriseOne Support demo booth to showcase many of the new capabilities available to you plus best practice approaches with existing capabilities, all to enhance your support experience. Oracle is also hosting a classroom-based Upgrades Workshop to explore methodology for a complete JD Edwards EnterpriseOne ERP software upgrade project. Space is limited so pre-register at QuestDirect.org/INFOCUS by adding the workshop to your agenda using the Agenda Builder on the Education tab. Finally, participate in one of the many enhancement discussions for key JD Edwards solutions at INFOCUS and contribute to the future of  JD Edwards through an interactive forum.  All of this is part of the 140+ education sessions being offered by the customer and vendor community.   There’s a lot of buzz around this conference, so don’t delay in registering key members of your team today.  We look forward to seeing you there so register NOW!

    Read the article

  • Dependency injection with n-tier Entity Framework solution

    - by Matthew
    I am currently designing an n-tier solution which is using Entity Framework 5 (.net 4) as its data access strategy, but am concerned about how to incorporate dependency injection to make it testable / flexible. My current solution layout is as follows (my solution is called Alcatraz): Alcatraz.WebUI: An asp.net webform project, the front end user interface, references projects Alcatraz.Business and Alcatraz.Data.Models. Alcatraz.Business: A class library project, contains the business logic, references projects Alcatraz.Data.Access, Alcatraz.Data.Models Alcatraz.Data.Access: A class library project, houses AlcatrazModel.edmx and AlcatrazEntities DbContext, references projects Alcatraz.Data.Models. Alcatraz.Data.Models: A class library project, contains POCOs for the Alcatraz model, no references. My vision for how this solution would work is the web-ui would instantiate a repository within the business library, this repository would have a dependency (through the constructor) of a connection string (not an AlcatrazEntities instance). The web-ui would know the database connection strings, but not that it was an entity framework connection string. In the Business project: public class InmateRepository : IInmateRepository { private string _connectionString; public InmateRepository(string connectionString) { if (connectionString == null) { throw new ArgumentNullException("connectionString"); } EntityConnectionStringBuilder connectionBuilder = new EntityConnectionStringBuilder(); connectionBuilder.Metadata = "res://*/AlcatrazModel.csdl|res://*/AlcatrazModel.ssdl|res://*/AlcatrazModel.msl"; connectionBuilder.Provider = "System.Data.SqlClient"; connectionBuilder.ProviderConnectionString = connectionString; _connectionString = connectionBuilder.ToString(); } public IQueryable<Inmate> GetAllInmates() { AlcatrazEntities ents = new AlcatrazEntities(_connectionString); return ents.Inmates; } } In the Web UI: IInmateRepository inmateRepo = new InmateRepository(@"data source=MATTHEW-PC\SQLEXPRESS;initial catalog=Alcatraz;integrated security=True;"); List<Inmate> deathRowInmates = inmateRepo.GetAllInmates().Where(i => i.OnDeathRow).ToList(); I have a few related questions about this design. 1) Does this design even make sense in terms of Entity Frameworks capabilities? I heard that Entity framework uses the Unit-of-work pattern already, am I just adding another layer of abstract unnecessarily? 2) I don't want my web-ui to directly communicate with Entity Framework (or even reference it for that matter), I want all database access to go through the business layer as in the future I will have multiple projects using the same business layer (web service, windows application, etc.) and I want to have it easy to maintain / update by having the business logic in one central area. Is this an appropriate way to achieve this? 3) Should the Business layer even contain repositories, or should that be contained within the Access layer? If where they are is alright, is passing a connection string a good dependency to assume? Thanks for taking the time to read!

    Read the article

  • Payment Gateway Choices

    Commissioning a new eCommerce Website is a process that demands answer after answer to questions that before you begin you may not be prepared for. One of the most fundamental choices that you must m... [Author: Diane Forster - Web Design and Development - March 29, 2010]

    Read the article

  • Microsoft Press Deal of the Day - 5/April/2012 - Windows® Internals, Part 1, Sixth Edition

    - by TATWORTH
    Today's Deal of the day from Microsoft Press at http://shop.oreilly.com/product/0790145305930.do is Windows® Internals, Part 1, Sixth Edition."Delve inside Windows architecture and internals—guided by a team of internationally renowned internals experts. Fully updated for Windows 7 and Windows Server 2008 R2, this classic guide delivers key architectural insights on system design, debugging, performance, and support—along with hands-on experiments to experience Windows internal behavior firsthand."

    Read the article

  • Robotic Arm &ndash; Hardware

    - by Szymon Kobalczyk
    This is first in series of articles about project I've been building  in my spare time since last Summer. Actually it all began when I was researching a topic of modeling human motion kinematics in order to create gesture recognition library for Kinect. This ties heavily into motion theory of robotic manipulators so I also glanced at some designs of robotic arms. Somehow I stumbled upon this cool looking open source robotic arm: It was featured on Thingiverse and published by user jjshortcut (Jan-Jaap). Since for some time I got hooked on toying with microcontrollers, robots and other electronics, I decided to give it a try and build it myself. In this post I will describe the hardware build of the arm and in later posts I will be writing about the software to control it. Another reason to build the arm myself was the cost factor. Even small commercial robotic arms are quite expensive – products from Lynxmotion and Dagu look great but both cost around USD $300 (actually there is one cheap arm available but it looks more like a toy to me). In comparison this design is quite cheap. It uses seven hobby grade servos and even the cheapest ones should work fine. The structure is build from a set of laser cut parts connected with few metal spacers (15mm and 47mm) and lots of M3 screws. Other than that you’d only need a microcontroller board to drive the servos. So in total it comes a lot cheaper to build it yourself than buy an of the shelf robotic arm. Oh, and if you don’t like this one there are few more robotic arm projects at Thingiverse (including one by oomlout). Laser cut parts Some time ago I’ve build another robot using laser cut parts so I knew the process already. You can grab the design files in both DXF and EPS format from Thingiverse, and there are also 3D models of each part in STL. Actually the design is split into a second project for the mini servo gripper (there is also a standard servo version available but it won’t fit this arm).  I wanted to make some small adjustments, layout, and add measurements to the parts before sending it for cutting. I’ve looked at some free 2D CAD programs, and finally did all this work using QCad 3 Beta with worked great for me (I also tried LibreCAD but it didn’t work that well). All parts are cut from 4 mm thick material. Because I was worried that acrylic is too fragile and might break, I also ordered another set cut from plywood. In the end I build it from plywood because it was easier to glue (I was told acrylic requires a special glue). Btw. I found a great laser cutter service in Kraków and highly recommend it (www.ebbox.com.pl). It cost me only USD $26 for both sets ($16 acrylic + $10 plywood). Metal parts I bought all the M3 screws and nuts at local hardware store. Make sure to look for nylon lock (nyloc) nuts for the gripper because otherwise it unscrews and comes apart quickly. I couldn’t find local store with metal spacers and had to order them online (you’d need 11 x 47mm and 3 x 15mm). I think I paid less than USD $10 for all metal parts. Servos This arm uses five standards size servos to drive the arm itself, and two micro servos are used on the gripper. Author of the project used Modelcraft RS-2 Servo and Modelcraft ES-05 HT Servo. I had two Futaba S3001 servos laying around, and ordered additional TowerPro SG-5010 standard size servos and TowerPro SG90 micro servos. However it turned out that the SG90 won’t fit in the gripper so I had to replace it with a slightly smaller E-Sky EK2-0508 micro servo. Later it also turned out that Futaba servos make some strange noise while working so I swapped one with TowerPro SG-5010 which has higher torque (8kg / cm). I’ve also bought three servo extension cables. All servos cost me USD $45. Assembly The build process is not difficult but you need to think carefully about order of assembling it. You can do the base and upper arm first. Because two servos in the base are close together you need to put first with one piece of lower arm already connected before you put the second servo. Then you connect the upper arm and finally put the second piece of lower arm to hold it together. Gripper and base require some gluing so think it through too. Make sure to look closely at all the photos on Thingiverse (also other people copies) and read additional posts on jjshortcust’s blog: My mini servo grippers and completed robotic arm  Multiply the robotic arm and electronics Here is also Rob’s copy cut from aluminum My assembled arm looks like this – I think it turned out really nice: Servo controller board The last piece of hardware I needed was an electronic board that would take command from PC and drive all seven servos. I could probably use Arduino for this task, and in fact there are several Arduino servo shields available (for example from Adafruit or Renbotics).  However one problem is that most support only up to six servos, and second that their accuracy is limited by Arduino’s timer frequency. So instead I looked for dedicated servo controller and found a series of Maestro boards from Pololu. I picked the Pololu Mini Maestro 12-Channel USB Servo Controller. It has many nice features including native USB connection, high resolution pulses (0.25µs) with no jitter, built-in speed and acceleration control, and even scripting capability. Another cool feature is that besides servo control, each channel can be configured as either general input or output. So far I’m using seven channels so I still have five available to connect some sensors (for example distance sensor mounted on gripper might be useful). And last but important factor was that they have SDK in .NET – what more I could wish for! The board itself is very small – half of the size of Tic-Tac box. I picked one for about USD $35 in this store. Perhaps another good alternative would be the Phidgets Advanced Servo 8-Motor – but it is significantly more expensive at USD $87.30. The Maestro Controller Driver and Software package includes Maestro Control Center program with lets you immediately configure the board. For each servo I first figured out their move range and set the min/max limits. I played with setting the speed an acceleration values as well. Big issue for me was that there are two servos that control position of lower arm (shoulder joint), and both have to be moved at the same time. This is where the scripting feature of Pololu board turned out very helpful. I wrote a script that synchronizes position of second servo with first one – so now I only need to move one servo and other will follow automatically. This turned out tricky because I couldn’t find simple offset mapping of the move range for each servo – I had to divide it into several sub-ranges and map each individually. The scripting language is bit assembler-like but gets the job done. And there is even a runtime debugging and stack view available. Altogether I’m very happy with the Pololu Mini Maestro Servo Controller, and with this final piece I completed the build and was able to move my arm from the Meastro Control program.   The total cost of my robotic arm was: $10 laser cut parts $10 metal parts $45 servos $35 servo controller ----------------------- $100 total So here you have all the information about the hardware. In next post I’ll start talking about the software that I wrote in Microsoft Robotics Developer Studio 4. Stay tuned!

    Read the article

  • UK Connected Systems User Group Recap from July

    - by Michael Stephenson
    Originally posted on: http://geekswithblogs.net/michaelstephenson/archive/2013/07/29/153557.aspxJust a note to recap some of the discussion and activity from the recent UK Connected Systems User Group in July.AppFx.ServiceBusWe discussed some of the implementation details of the AppFx.ServiceBus codeplex project.  This brought up some discussion around peoples experiences with Windows Azure Service Bus and how this codeplex project can help.  The slides from this presentation are available at the following location.https://appfxservicebus.codeplex.com/downloads/get/711481BizTalk Maturity AssessmentThe session around the BizTalk Maturity Assessment brought up some interesting discussions.  I have created a video about the content from this session which is available online.To findout more about the BizTalk Maturity Assessment refer to:http://www.biztalkmaturity.com/To view the video refer to:http://www.youtube.com/watch?v=MZ1eC5SCDogOther NewsHybrid Organisation EventThe next user group session will be a full day event on the 11th September called The Hybrid Organisation.  We have some great sessions lined up and you can findout more about this event on the following link:http://ukcsug-hybridintegration-sept2013.eventbrite.com/Saravana's BizTalk Services VideosSaravana has recently published some BizTalk Services videos that he wanted to share with everyone.http://blogs.biztalk360.com/windows-azure-biztalk-serviceshello-word-and-hybrid-scenarios-demo-videos/Hope to see everyone soon and let me know if anyone has any questionsRegardsMike

    Read the article

  • Daily tech links for .net and related technologies - Mar 18-21, 2010

    - by SanjeevAgarwal
    Daily tech links for .net and related technologies - Mar 18-21, 2010 Web Development TDD kata for ASP.NET MVC controllers (part 2) -David Take Control Of Web Control ClientID Values in ASP.NET 4.0 - Scott Mitchell Inside the ASP.NET MVC Controller Factory - Dino Esposito Microsoft, jQuery, and Templating - stephen walther Cross Domain AJAX Request with YQL and jQuery - Jeffrey Way T4MVC Add-In to auto run template -Wayne Web Design Website Content Planning The Right Way - Kristin Wemmer Microsoft...(read more)

    Read the article

  • The Dos and Don'ts of Database Indexing

    The creation of database indexes is the last thing developers and database designers think about--almost an afterthought. Greg Larsen shows you some of the dos and don'ts of indexing to help you pick reasonable indexes at design time.

    Read the article

  • Video on Architecture and Code Quality using Visual Studio 2012&ndash;interview with Marcel de Vries and Terje Sandstrom by Adam Cogan

    - by terje
    Find the video HERE. Adam Cogan did a great Web TV interview with Marcel de Vries and myself on the topics of architecture and code quality.  It was real fun participating in this session.  Although we know each other from the MVP ALM community,  Marcel, Adam and I haven’t worked together before. It was very interesting to see how we agreed on so many terms, and how alike we where thinking.  The basics of ensuring you have a good architecture and how you could document it is one thing.  Also, the same agreement on the importance of having a high quality code base, and how we used the Visual Studio 2012 tools, and some others (NDepend for example)  to measure and ensure that the code quality was where it should be.  As the tools, methods and thinking popped up during the interview it was a lot of “Hey !  I do that too!”.  The tools are not only for “after the fact” work, but we use them during the coding.  That way the tools becomes an integrated part of our coding work, and helps us to find issues we may have overlooked.  The video has a bunch of call outs, pinpointing important things to remember. These are also listed on the corresponding web page. I haven’t seen that touch before, but really liked this way of doing it – it makes it much easier to spot the highlights.  Titus Maclaren and Raj Dhatt from SSW have done a terrific job producing this video.  And thanks to Lei Xu for doing the camera and recording job.  Thanks guys ! Also, if you are at TechEd Amsterdam 2012, go and listen to Adam Cogan in his session on “A modern architecture review: Using the new code review tools” Friday 29th, 10.15-11.30 and Marcel de Vries session on “Intellitrace, what is it and how can I use it to my benefit” Wednesday 27th, 5-6.15 The highlights points out some important practices.  I’ll elaborate on a few of them here: Add instructions on how to compile the solution.  You do this by adding a text file with instructions to the solution, and keep it under source control.  These instructions should contain what is needed on top of a standard install of Visual Studio.  I do a lot of code reviews, and more often that not, I am not even able to compile the program, because they have used some tool or library that needs to be installed.  The same applies to any new developer who enters into the team, so do this to increase your productivity when the team changes, or a team member switches computer. Don’t forget to document what you have to configure on the computer, the IIS being a common one. The more automatic you can do this, the better.  Use NuGet to get down libraries. When the text document gets more than say, half a page, with a bunch of different things to do, convert it into a powershell script instead.  The metrics warning levels.  These are very conservatively set by Microsoft.  You rarely see anything but green, and besides, you should have color scales for each of the metrics.  I have a blog post describing a more appropriate set of levels, based on both research work and industry “best practices”.  The essential limits are: Cyclomatic complexity and coupling:  Higher numbers are worse On method levels: Green :  From 0 to 10 Yellow:  From 10 to 20  (some say 15).   Acceptable, but have a look to see if there is something unneeded here. Red: From 20 to 40:   Action required, get these down. Bleeding Red: Above 40   This is the real red alert.  Immediate action!  (My invention, as people have asked what do I do when I have cyclomatic complexity of 150.  The only answer I could think of was: RUN! ) Maintainability index:  Lower numbers are worse, scale from 0 to 100. On method levels: Green:  60 to 100 Yellow:  40 – 60.    You will always have methods here too, accept the higher ones, take a look at those who are down to the lower limit.  Check up against the other metrics.) Red:  20 – 40:  Action required, fix these. Bleeding red:  Below 20.  Immediate action required. When doing metrics analysis, you should leave the generated code out.  You do this by adding attributes, unfortunately Microsoft has “forgotten” to add these to all their stuff, so you might have to add them to some of the code.  It most cases it can be done so that it is not overwritten by a new round of code generation.  Take a look a my blog post here for details on how to do that. Class level metrics might also be useful, at least for coupling and maintenance.  But it is much more difficult to set any fixed limits on those.  Any metric aggregations on higher level tend to be pretty useless, as the number of methods vary pretty much, and there are little science on what number of methods can be regarded as good or bad.  NDepend have a recommendation, but they say it may vary too.  And in these days of data binding, the number might be pretty high, as properties counts as methods.  However, if you take the worst case situations, classes with more than 20 methods are suspicious, and coupling and cyclomatic complexity go red above 20, so any classes with more than 20x20 = 400 for these measures should be checked over. In the video we mention the SOLID principles, coined by “Uncle Bob” (Richard Martin). One of them, the Dependency Inversion principle we discuss in the video.  It is important to note that this principle is NOT on whether you should use a Dependency Inversion Container or not, it is about how you design the interfaces and interactions between your classes.  The Dependency Inversion Container is just one technique which is based on this principle, but which main purpose is to isolate things you would like to change at runtime, for example if you implement a plug in architecture.  Overuse of a Dependency Inversion Container is however, NOT a good thing.  It should be used for a purpose and not as a general DI solution.  The general DI solution and thinking however is useful far beyond the DIC.   You should always “program to an abstraction”, and not to the concreteness.  We also talk a bit about the GRASP patterns, a term coined by Craig Larman in his book Applying UML and design patterns. GRASP patterns stand for General Responsibility Assignment Software Patterns and describe fundamental principles of object design and responsibility assignment.  What I find great with these patterns is that they is another way to focus on the responsibility of a class.  One of the things I most often found that is broken in software designs, is that the class lack responsibility, and as a result there are a lot of classes mucking around in the internals of the other classes.  We also discuss the term “Code Smells”.  This term was invented by Kent Beck and Martin Fowler when they worked with Fowler’s “Refactoring” book. A code smell is a set of “bad” coding practices, which are the drivers behind a corresponding set of refactorings.  Here is a good list of the smells, and their corresponding refactor patterns. See also this.

    Read the article

< Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >