Search Results

Search found 35291 results on 1412 pages for 'start menu'.

Page 526/1412 | < Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >

  • Ubuntu server 11.04 recognize only 1 core instead of 4

    - by Kreker
    I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

    Read the article

  • How do I modify these VPN connection settings for Xfce?

    - by Dave M G
    I have signed up for a VPN (Virtual Private Network) service, and I configured it for use on my computer that runs Gnome Classic with the following instructions: In Terminal, install openvpn packages with sudo apt-get install network-manager-openvpn. 1. Restart the network manager with sudo restart network-manager 2. Run sudo wget https://www.xxxxxxx.com/ovpnconfigure.zip 3. Extract the files from the zip with unzip ovpnconfigure.zip. 4. Move cert.crt to /etc/openvpn 5. Open the Network Manager on the menu bar. 6. Choose add and select the OpenVPN connection type, and click Create. 7. Enter Private Internet Access SSL for the Connection Name. 8. Enter xxxxxx.xxxxxxxx.com for the Gateway 9. Select Password and enter your login credentials. 10. Browse and select the CA Certificate we saved in Step 3. 11. Choose Advanced and enable LZO Compression. 12. Apply and exit. 13. Connect using the Network Manager. It worked, but now I want to set up access to the same VPN service on another machine that runs Mythbuntu, which uses Xfce as its desktop manager. So every point from 5 on doesn't apply. How can I modify the above instructions so that I can get my VPN service working with Xfce. As a further note, while I can access the Xfce desktop directly if I need to, it's more convenient for me to access it via the command line and SSH from on of my other computers. A command line process would be ideal. (I looked for this, and found instructions only for PPTP access, whereas I need OpenVPN.)

    Read the article

  • New features in SQL Prompt 6.4

    - by Tom Crossman
    We’re pleased to announce a new beta version of SQL Prompt. We’ve been trying out a few new core technologies, and used them to add features and bug fixes suggested by users on the SQL Prompt forum and suggestions forum. You can download the SQL Prompt 6.4 beta here (zip file). Let us know what you think! New features Execute current statement In a query window, you can now execute the SQL statement under your cursor by pressing Shift + F5. For example, if you have a query containing two statements and your cursor is placed on the second statement: When you press Shift + F5, only the second statement is executed:   Insert semicolons You can now use SQL Prompt to automatically insert missing semicolons after each statement in a query. To insert semicolons, go to the SQL Prompt menu and click Insert Semicolons. Alternatively, hold Ctrl and press B then C. BEGIN…END block highlighting When you place your cursor over a BEGIN or END keyword, SQL Prompt now automatically highlights the matching keyword: Rename variables and aliases You can now use SQL Prompt to rename all occurrences of a variable or alias in a query. To rename a variable or alias, place your cursor over an instance of the variable or alias you want to rename and press F2: Improved loading dialog box The database loading dialog box now shows actual progress, and you can cancel loading databases:   Single suggestion improvement SQL Prompt no longer suggests keywords if the keyword has been typed and no other suggestions exist. Performance improvement SQL Prompt now has less impact on Management Studio start up time. What do you think? We want to hear your feedback about the beta. If you have any suggestions, or bugs to report, tell us on the SQL Prompt forum or our suggestions forum.

    Read the article

  • Is it considered poor programming to do this with xna components?

    - by Rob
    I created my own Menu System that is event driven. In order to have a loading screen and multithreaded loading to work, I devised this sort of implementation: //Let's check if the game is done loading. if (_game != null) { _gameLoaded = _game.DoneLoading; } //This means the game is loading still, //therefore the loading screen should be active. if (!_gameLoaded && _gameActive) { _gameScreenList[2].UpdateMenu(); } //The loading screen was selected. if (_gameScreenList[2].CurrentState == GameScreen.State.Shown && !_gameActive) { Components.Add(_game = new ParadoxGame(this)); _game.Initialize(); //Initializes the Game so that the loading can begin. _gameActive = true; } In the XNA Game Component that contains the actual game, in the LoadContent method I simply created a new Thread that calls another method ThreadLoad that has all the actual loading. I also have a boolean variable called DoneLoading in the XNA Game Component that is set to true at the end of the ThreadLoad. I am wondering if this is a poor implementation.

    Read the article

  • CodePlex Daily Summary for Sunday, June 26, 2011

    CodePlex Daily Summary for Sunday, June 26, 2011Popular ReleasesDroid Builder: Droid Builder - 1.0.4194.38898: Support new type of patch package. Support plugin framework.Mosaic Project: Mosaic Alpha build 254: - Added horizontal scroll by mouse in fullscreen mode - Widgets now have fixed size - Reduced spacing between widgets - Widgets menu is scrollable by mouse now and not overlapping back button on small screens.Net Image Processor: v1.0: Initial release of the library containing the core architecture and two filters. To install, extract the library to somewhere sensible then reference as a file from your project in Visual Studio.Usage Agent: Usage Agent 9.0.8: Latest release. Changes include: - Fixes for Optus - Usage Delta statistic for BigPond - Eliminated the need for UAC prompt at every startupjQuery List DragSort: jQuery List DragSort 0.4.3: Fix item not dropping correctly on Chrome and jQuery 1.6KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.TerrariViewer: TerrariViewer v3.3 [v1.0.5 Compatible]: I have added support for all the new items in Terraria v1.0.5. I have also added the ability to put your character in hardcore mode or take them out via a simple checkbox on the stats tab. If you come across any bugs, please let me know immediately.Media Companion: MC 3.409b-1 Weekly: This weeks release is part way through a major rewrite of the TVShow code. This means that a few TV related features & functions are not fully operational at the moment. The reason for this release is so that people can see if their particular issue has been fixed during the week. Some issues may not be able to be fully checked due to the ongoing TV code refactoring. So, I would strongly suggest that you put this version into a separate folder, copy your settings folder across & test MC that...Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5Kinect Earth Move: KinectEarthMove sample code: Sample code releasedThis is a sample code for Kinect for Windows SDK beta, which was demonstrated on Channel 9 Kinect for Windows SKD beta launch event on June 17 2011. Using color image and skeleton data from Kinect and user in front of Kinect can manipulate the earth between his/her hands.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9b: Changes: - fix critical issue 262334 (AccessViolationException while using events in a COMAddin) - remove x64 Assemblies (not necessary) Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...MiniTwitter: 1.70: MiniTwitter 1.70 ???? ?? ????? xAuth ?? OAuth ??????? 1.70 ??????????????????????????。 ???????????????? Twitter ? Web ??????????、PIN ????????????????????。??????????????????、???????????????????????????。Total Commander SkyDrive File System Plugin (.wfx): Total Commander SkyDrive File System Plugin 0.8.7b: Total Commander SkyDrive File System Plugin version 0.8.7b. Bug fixes: - BROKEN PLUGIN by upgrading SkyDriveServiceClient version 2.0.1b. Please do not forget to express your opinion of the plugin by rating it! Donate (EUR)SkyDrive .Net API Client: SkyDrive .Net API Client 2.0.1b (RELOADED): SkyDrive .Net API Client assembly has been RELOADED in version 2.0.1b as a REAL API. It supports the followings: - Creating root and sub folders - Uploading and downloading files - Renaming and deleting folders and files Bug fixes: - BROKEN API (issue 6834) Please do not forget to express your opinion of the assembly by rating it! Donate (EUR)Mini SQL Query: Mini SQL Query v1.0.0.59794: This release includes the following enhancements: Added a Most Recently Used file list Added Row counts to the query (per tab) and table view windows Added the Command Timeout option, only valid for MSSQL for now - see options If you have no idea what this thing is make sure you check out http://pksoftware.net/MiniSqlQuery/Help/MiniSqlQueryQuickStart.docx for an introduction. PK :-]HydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.2.591 Beta Release: 1.2.591 Beta Releasepatterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...DropBox Linker: DropBox Linker 1.3: Added "Get links..." dialog, that provides selective public files links copying Get links link added to tray menu as the default option Fixed URL encoding .NET Framework 4.0 Client Profile requiredDotNetNuke® Community Edition: 06.00.00 Beta: Beta 1 (Build 2300) includes many important enhancements to the user experience. The control panel has been updated for easier access to the most important features and additional forms have been adapted to the new pattern. This release also includes many bug fixes that make it more stable than previous CTP releases. Beta ForumsBlogEngine.NET: BlogEngine.NET 2.5 RC: BlogEngine.NET Hosting - Click Here! 3 Months FREE – BlogEngine.NET Hosting – Click Here! This is a Release Candidate version for BlogEngine.NET 2.5. The most current, stable version of BlogEngine.NET is version 2.0. Find out more about the BlogEngine.NET 2.5 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation. If you are upgrading from a previous version, please take a look at ...New Projects6_6_6_w_m_s_open: jwervxsdfcfcf: cfcfChairforce hackathon project: project for hackathonDot Net Nuke Ajax Modules: This is a small collection of modules I think on once in a while which intend to improve a little dnn's user experience.Gnosis Game Engine: A simple game engine for the XNA 4.0 frame work that I am working on, mostly as a learning experience. I found that XNA game engines either require you to pay or are XNA 4.0 incompatible, and so this is my solution to that problem.KA_WindowsPhone7_Samples: Sample Code for Windows Phone 7 from http://kevinashley.comKinect MIDI Controller: This tool allows you to use a Kinect Sensor as a MIDI Controller for your Digital Audio Workbench. The tool is written in C#, and uses Microsoft Kinect SDK. Mosaic Project: Mosaic is an application that brings Metro UI to your desktop by live widgets.Movie Gate: A movie database that is also able to play the movies with your favorit media player.Musical Collective: An open-source web service that enables Musicians to collaborate on songs. Written in ASP.NET MVC (C#).NcADS-MVC: Clasificados MVCPokeTD: Ein kleines 2D Pokemon Tower-Defense Spiel. Es ist in C# und XNA geschrieben.PRO-TOKOL: PRO-TOKOL Server is a Programmable Logic Controller communication driver. The project is 100% coded in .NET Managed code. So, the dll can be included in any .NET project. The project uses the Microsoft Workflow Foundation to implement the DF1 Receiver and Transmitter logic.ShumaDaf: small project for display movies info directly from file structure using mymovies.xml. program create one simple xml file and display it!Silverlight Policy Service: The windows service act as a server and listens on TCP port 943 using IPv4 and IPv6. The socket policy included in the project allows all silverlight client applications to connect to TCP ports 4502-4506.SkinObject Module Wrapper: The SkinObject Module Wrapper is a DotNetNuke module that will allow you to add any DNN SkinObject to a page dinamically as if it was a DNN Module. Without any skin modification you can now inject new SkinObjects to you pages, configure the properties and change them on the fly.SkyNet0.3: Program that one should not be able to close.Team Zero Game One: SVN for the personal project(s) of Team Zero - Game One. We are creating a free game in HTML5 canvas using the CAKE api, found here: http://code.google.com/p/cakejs/ The game is about programming a small robot to move through a maze, sneaking past guards and other obstacles, using event-based programming. We've seen a number of games that allow you to "program" a character, and thought it would be interesting to do a different take on it. The game is still in early production, and actively ...Test-Driven Scaffolding (TDS): TDS helps developers of C# function members (methods, indexers, etc.) to quickly write drivers for code under development; these can easily be converted later to NUnit tests. TDS consists of C# code that can be pasted into a new or existing project and removed when no longer needed.Usage Agent: The Usage Agent toolset is designed to help manage your ISP data usage without having to log into your ISP usage page. It can optionally monitor your network card throughput and produce reports on usage. Developed in VB.NET.

    Read the article

  • "Missing Operating System" after installing Ubuntu 12.04 from a CD on a Macbook Pro

    - by Pierre
    I followed this guide to install Ubuntu 12.04 on my Macbook Pro 8,2 (late 2011): https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation I used a CD. I synced the partition table on rEFIt, and it went fine. I do have an icon to boot on Linux, but when I launch it, after a few seconds I have "Missing Operating System" displayed, and that's all... How can I fix that? The only thing I see is, in the guide, it is mentioned this: On the last dialog of the installer, be sure to click the “Advanced” button and choose to install the boot loader (grub) to your root Ubuntu partition, for example /dev/sda3. This will be the only partition with the EXT4 file system. In Ubuntu 12.04 installation process, there is not such an option, but there is a dropdown menu to select where the grub bootloader should be installed. It was /dev/sda by default, but I selected my root Ubuntu partition (in my case, /dev/sda5). I got a warning message (but actually, it was the same warning message even when I selected /dev/sda), and I continued the installation... Thanks in advance for your help!

    Read the article

  • Touchpad stops working after desktop shows up

    - by gsedej
    Hi! I have problem with touch-pad. It is not working correctly. It goes like this. When laptop is booting, right after desktop shows, I can move mouse with touch-pad for a second, but when icons shows up, touch-pad does not want to move cursor at all. Even buttons stops work. The same problem with Ubuntu 10.04 and Ubuntu 10.10 I can see "Touchpad" tab in "Mouse" menu, and I can even set "two finger scrolling". I checked in gconf-editor under "desktop-gnome-pheriferals-touchpad" and it's enabled. Furthermore I checked xinput and it is as it should be: SynPS/2 Synaptics TouchPad id=11 [slave pointer (2)]. I tried to create new master reattach but still nothing... EDIT: Laptop has fn + F7 to control touch-pad. Ubuntu shows bobble showing touchpad OFF and touchpad ON. But it does nothing. No matter if it say ON, it still does not work.

    Read the article

  • Bust Out these 13 Spooky Games for Halloween

    - by Jason Fitzpatrick
    Looking for a suitably spooky board game for Halloween? This roundup includes everything from the light-hearted to the dark and challenging. Over at GeekDad they’ve rounded up 13 horror/Halloween themed board games to help you fill your holiday board gaming quota. The list includes classics like the in-depth and atmospheric Arkham Horror to more recent and kid-friendly GeistesBlitz. Although we think their list is rock solid and includes some great titles, we’re disappointed to see that Witch of Salem, a great lighter-weight alternative to Arkham Horror for those nights you want some cooperative H.P. Lovecraft inspired play without the massive setup and game length, didn’t make the list. To check out the full GeekDad list hit up the link below, for more boardgame-centric reading we highly recommend the excellent board gaming site BoardgameGeek. 13 Spooky Board Games for Your Halloween Game Night [GeekDad] What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

    Read the article

  • Windows 8 Store App Crash Logs

    - by David Paquette
    I was recently working on a Windows 8 app, and the application was crashing occasionally.  When resuming the application, the app would crash and close immediately without providing any feedback or information on what went wrong.  The crash was very difficult to reproduce, and I could never get the crash to occur when I was debugging through Visual Studio.  My app was crashing, and I had no idea what was going wrong!  HELP!!! After doing some digging, I found that when a Windows 8 Store App crashes, an error is logged in Windows Administrative Events.  You can view the details of any app crash by launching the Event Viewer and selecting Administrative Events under Custom Views.  The Source of the error will be listed as AppHost.  AppHost is the process that runs your Windows 8 Store App.  The error details contain all the information you would expect to find, including a stack trace and line numbers.   Windows 8 Tip:  A shortcut for launching the Event Viewer in Windows 8.  Right click on the bottom left corner of your desktop (where you normally click to go to the Start Screen).  A menu will appear with shortcuts to a number of common system tasks such as Event Viewer, Task Manager, Command Prompt, and Device Manager.

    Read the article

  • SOA Suite 11g Purging Guide

    - by ShawnBailey
    We now have a single source of truth concerning Purging in My Oracle Support. The material is contained within the SOA 11g Infrastructure Database: Installation, Maintenance and Administration Guide under the 'Purging' tab. All of the previous purge related content for 11g is now deprecated and many of the documents will redirect to this Guide while others simply contain a disclaimer. What does the Guide contain? Summary Overview of Purging. What it does and why it's important Specific information on each release of 11g Available patches for each release of 11g and recommendations How to run the different purge scripts Tips on improving performance How to begin troubleshooting problems with the process How to identify orphaned records Useful reference information Here are a couple of screen shots to help with navigation: Guide Landing Page: (click image for full view) Select the 'Purging' tab: (click image for full view) The left menu contains the following options: Alternative: Database Partitioning What to do on 11gR1 GA (11.1.1.1) What to do on PS1 (11.1.1.2) What to do on PS2 (11.1.1.3) What to do on PS3 (11.1.1.4) What to do on PS4 (11.1.1.5) Overview of PS5 (11.1.1.6) Purging Step by Step Performance Tips Troubleshooting Purge Orphaned Records Reference This resource goes hand in hand with the excellent documents SOA 11g Database Growth Management Strategy and Start Small, Grow Fast available on OTN. The latest product documentation can be found here.

    Read the article

  • How to have Windows 7 remember a password for a Domain

    - by Kelly Jones
    About eighteen months ago, I wrote a post covering how to clear saved passwords in Windows XP.  This week at work I was reminded how useful it is to not only deleted saved passwords, but to also setup wildcard credentials using this same interface. The scenario that I run into as consultant working at a client site, is that my laptop is not a member of the Windows Domain that my client uses to secure their network. So, when I need to access file shares, shared printers, or even the clients internal websites, I’m prompted for a name and password.  By creating a wildcard entry on my laptop (for the user account that the client issued to me), I avoid this prompt and can seamlessly access these resources.  (This also works when you’ve configured Outlook to access Exchange via RPC over HTTP.) How to create a credential wild card entry in Windows 7: Go to your Start Menu --> Type "user" into the Search box Click on the “Manage your credentials” in the column on the left Click on the “Add a Windows credential” link Enter the Domain (in my case my client’s domain), something like this: *.contoso.com Enter the username and password That’s it.  You should now be able to access resources in that Domain without being prompted for your name and password.  Please note: if you are required to change your password periodically for that domain, you’ll need to update your saved password as well.

    Read the article

  • How to install Ubuntu 12.04.1 in EFI mode with Encrypted LVM?

    - by g0lem
    I'm trying to properly install Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with the alternate install CD ".iso" on a lenovo Thinkpad X220. Default Hard Disk (with a pre-installed version of Windows 7) has been replaced with a brand new SSD. The UEFI BIOS of the lenovo Thinkpad X220 is set to "UEFI Boot only" & "USB UEFI BIOS Support" is enabled (I'm using an external USB DVD reader to perform Ubuntu installation). The BIOS is a Phoenix SecureCore Tiano, BIOS version is 8DET56WW (1.26). The attempts below are made with the UEFI BIOS settings described above. Here's what I've tried so far: Boot on a live GParted CD Create a GPT partition table Create a FAT32 partition for UEFI System, set the partition to "EF00" type ("boot" flag) Leave remaining space unformated Boot on Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with alternate CD: Perform the install with network updates enabled Use manual partitioning FAT32 partition created with GParted is used as "EFI System partition" Remaining space is set to be used as "Physical volume for LVM" Then "Configure encrypted volumes" using the previous "Physical volume for LVM" as the encrypted container, passphrase is setup. "Configure the Logical Volume Manager" creating a volume Group using the encrypted container /dev/mapper/sda2_crypt Creation of the Logical Volumes "Create logical volume", choosing the previously created volume Group Assign a mount point and file system to the Logical volumes : LV-root for / LV-var for /var LV-usr for /usr LV-usr-local for /usr/local LV-swap for swap LV-home for /home NOTE: /tmp would be in RAM only using TMPFS Bootloader step: neither my ESP partition (/dev/sda1, /dev/sda or MBR) seems to be the right place for GRUB, I get the following message (X suffix is for demonstration only): unable to install grub in /dev/sdaX Executing 'grub-install /dev/sdaX' failed This is a fatal error. Finish installation without the Bootloader & Reboot The system doesn't start, there's no EFI/GRUB menu at startup. What are the steps to perform a clean and working installation of Ubuntu 12.04.1 Precise Pangolin, 64bit version in U(EFI) mode using the encrypted LUKS + LVM scheme described above?

    Read the article

  • How to schedule time-of-day upgrades

    - by Richard
    Hello, I'm responsible for about 30 Ubuntu computers at a private K-8 school. We have only a 3Mbps internet connection serving the entire campus, and I would like to ensure that updates are done in the middle of the night - so that daytime tasks are not slowed down. I'm using Ubuntu 10.04, and have set all computers to download and install security updates via the update manager. I have also installed cron-apt, and modified the config file to stagger the start times of the upgrades from about 10pm to 4am local time. HOWEVER - this morning I arrived at the school at 7:30am and all the computers were busy downloading a large security based update. Needless to say, all internet activity was slowed to a crawl (for the next 2 hours), and the computer users were very very upset. This was the event I'm trying so hard to prevent. It seems that my scheme to ensure middle of the night downloads failed, and I'm not sure why. I've also tried some schemes using unattended-upgrades & crontab, but there always seemed to be something scheduling upgrades to occur in addition to the ones I try to force at middle of the night. Is there a sure fire way to absolutely positively guarantee that updates will occur only at one specific time? It would be nice if the update manager just had a drop down menu to specify a designated time. Thanks in advance for any help you can give me.

    Read the article

  • XboxMP Helps You Find Multiplayer Games for the Xbox

    - by Jason Fitzpatrick
    Searching for the perfect versus or cooperative Xbox multiplayer game can be challenging–the game publisher says it plays four but what exactly does that mean? XboxMP catalogs games with detailed breakdowns of what the multiplayer experience actually entails. You can search first generation Xbox games, Xbox 360 games, and Xbox Live Arcade games with a variety of detailed criteria including the number of players it supports for local, system link, and online play (it may be a deal breaker, for example, that the only way to play the game with 4 players is to have two Xboxes or an Xbox live account). In addition to the multiplayer game data each game listing also includes addition information about the general game play including peripheral support and other features. Hit up the link below to check it out and, for more help finding multiplayer cooperative games, make sure to check out previously reviewed Co-Optimus. XBoxMP What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

    Read the article

  • "Unable to install GRUB in /dev/sda" when installing GRUB

    - by vicban3d
    I recently bought a shiny new Lenovo Yoga 2 Pro and I want to dual boot it with Ubuntu for studying purposes. Its built-in OS is Windows 8.1 and it has a 256GB SSD. I've made a separate 90GB partition just for Ubuntu and a live USB to install it. The first time everything seemed to work great, I solved the wifi issued by blacklisting ideapad_laptop, the installation went flawlessly and Ubuntu worked fine. When I got up the next morning and turned on my laptop it booted into Windows right away without ever showing the GRUB menu. So I tried to reset, and checked my partitions with the Disk Manager and everything looked fine. Since I couldn't find a solution online I went ahead and formatted the partition to try and install again. This time and every time since, the installation was aborted and I got a fatal error saying: Unable to install GRUB in /dev/sda Executing `grub-install /dev/sda` failed. This is a fatal error. Can anyone please suggest a solution to this problem? If any further information is needed I would be happy to provide it. Thanks. When installing I get the following in details: ubuntu kernel: [ 1946.372741] FAT-fs (sda2): error, fat_get_cluster: invalid cluster chain (i_pos 0). ubuntu grub-installer: error: Running 'grub-install --force failed.

    Read the article

  • How to efficiently protect part of an application with a license

    - by Patrick
    I am working on an application that has many functional parts. When a customer buys the application, he buys the standard functionality, but he can also buy some additional elements of the application for an additional price. All of the elements are part of the same application executable. A license key is used to indicate which of the elements should be accessible in the application. Some of the elements can be easily disabled if the user didn't pay for it. These are typically the modules that you can access via the application's menu. However, some elements give more problems: What if a part of the data model is related to an optional part? Do I build up these data structures in my application so the rest of my application can just assume they're always there? Or do I don't build them, and add checks in the rest of may application? What if some optional part is still useful to perform some internal tasks, but I don't want to expose it to the user externally? What if the marketing responsible wants to make a standard part now an optional part? In all of my application I assume that that part is present, but if it becomes optional, I should add checks on it everywhere in the application. I have some ideas on how to solve some of the problems (e.g. interfaces with dual implementations: one working implementation, and one that is activated if the optional part is not activated). Do you know of any patterns that can be used to solve this kind of problem? Or do you have any suggestions on how to handle this licensing problem? Thanks.

    Read the article

  • keyPressed is not working after adding ActionListener to JButton

    - by Yehonatan
    I have a serious problem while trying to build a menu for my game. I've added two JButton to a main JPanel and added an ActionListener for each of them. The main JPanel also contains the game JPanel which have the keyPressed method inside keyController. That's how it looks - Main -       JPanel -         JButton, JButton,         JPanel which contains the game and keyPressed function inside KeyController class which worked fine before I added the ActionListener for JButton. For some reason after I added an ActionListener for each of the button, the game JPanel is not getting any keyPreseed events nor KeyRealesed. Does anyone know the solution for my situation? Thank you very much! Main window - Scanner in = new Scanner(System.in); JFrame f = new JFrame("Square V.S Circles"); f.setUndecorated(true); f.setResizable(false); f.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE); f.add(new JPanelHandler()); f.pack(); f.setVisible(true); f.setLocationRelativeTo(null); JPanelHandler(main JPanel) - super.setFocusable(true); JButton mybutton = new JButton("Quit"); JButton sayhi = new JButton("Say hi"); sayhi.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { System.out.println("Hi"); } }); mybutton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { System.exit(0); } }); add(mybutton); add(sayhi); add(new Board(2)); Board KeyController(The code inside is working so it's unnecessary to put it here) - private class KeyController extends KeyAdapter { public KeyController() { ..Code } @Override public void keyPressed(KeyEvent e) { ...Code } @Override public void keyReleased(KeyEvent e){ ...Code } }

    Read the article

  • Ubuntu 12.04 and Nvidia GTX 550 Ti

    - by Jim
    OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

    Read the article

  • Moving from a static site to a CMS with new URLs and meta-data for pages

    - by Chris J
    Hi I am in the process of rebuilding a site from static pages to a CMS which will be using mod_rewrite to generate new page URLs. In this process our marketing people and myself have decided to tidy up the descriptions, keywords and titles. Eg: a page which who's URL is currently "website-name/about_us.html" and has a title of "website-name - something not quite page specific" will change to "website-name/about-us/" and title: "about us - website-name" and may have a few keywords and the description changed. Our goal with updating the meta data is to improve our page rankings and try to keep in line with some best practices for SEO. Though our current page rankings are quite good in many aspects, there is room for improvement. All of the pages will also have content changes (like rearranging heading tags, new menu on all pages, new content in footer, extra pieces of dynamic content relating to other pages). In this new site process I plan to use 301 redirects for all the old URLs pointing to the new URLs. My question is what can I expect to happen to the page rankings in Google, in the sort term and long term? Will this be like kicking off a new site which will have to build up trust over time or will the original page rankings have affect?

    Read the article

  • Ubuntu update deleted entries from grub

    - by Kevin
    My computer currently has Fedora, Ubuntu, and Windows installed. I just updated Ubuntu 12.04, and on restarting, the Fedora entry was gone from GRUB. Ubuntu and Windows remained, though. I have looked at these threads: Fedora login gone after Ubuntu updates on a dual boot http://forums.fedoraforum.org/showthread.php?t=279221 GRUB's menu.lst deleted after a kernel update However, I cannot figure out how to mount the drive as suggested. It does not appear in the list on the left side of nautilus as shown in the links above. I also tried running the following as suggested above: sudo grub-install /dev/sdX sudo update-grub But this gave scary errors: /usr/sbin/grub-setup: warn: Attempting to install GRUB to a partitionless disk or to a partition. This is a BAD idea.. /usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged.. /usr/sbin/grub-setup: error: will not proceed with blocklists. The highlighted drive below is where Fedora lives. Thanks for any help reversing Ubuntu's decision to delete this from GRUB.

    Read the article

  • How can I triple boot Xubuntu, Ubuntu and Windows?

    - by ag.restringere
    Triple Booting Xubuntu, Ubuntu and Windows I'm an avid Xubuntu (Ubuntu + XFCE) user but I also dual boot with Windows XP. I originally created 3 partitions and wanted to use the empty one as a storage volume but now I want to install Ubuntu 12.04 LTS (the one with Unity) to do advanced testing and packaging. Ideally I would love to keep these two totally separate as I had problems in the past with conflicts between Unity and XFCE. This way I could wipe the Ubuntu w/ Unity installation if there are problems and really mess around with it. My disk looks like this: /dev/sda1 -- Windows XP /dev/sda2 -- Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 63 78139454 39069696 7 HPFS/NTFS/exFAT /dev/sda2 78141440 156280831 39069696 83 Linux /dev/sda3 156282878 386533375 115125249 5 Extended /dev/sda4 386533376 390721535 2094080 82 Linux swap / Solaris /dev/sda5 156282880 386533375 115125248 83 Linux Keep each in it's own partition and totally separate and be able to select from each of the three systems from the GRUB boot menu... sda1 --- [Windows XP] sda2 --- [Ubuntu 12.04] "Unity" sda3(4,5) -- [Xubuntu 12.02] "Primary XFCE" What is the safest and easiest way to do this without messing my system up and requiring invasive activity?

    Read the article

  • Accessing Secure Web Services from ADF Mobile

    - by Shay Shmeltzer
    Most of the enterprise Web services you'll access are going to be secured - meaning they'll require you to pass a user/password in order to get to their data.  If you never created a secured Web service, it's simple in JDeveloper! For the below video I just right clicked on a Java class that I exposed as a Web service, and chose  "Web Service Properties" and then checked the "oracle/wss_username_token_service_policy" box from the list of options (that's the option supported by ADF Mobile right now): In the demo below we are going to use a "remote" login server that does the authentication of the user/pass.The easiest way to "create" a remote login server is to create a "regular" web ADF application, secure it, and deploy it on a server. The secured ADF application can just require ADF Authentication with a simple HTTP Basic Authentication - basically the next two images in the Application->Secure->Configure ADF Security menu wizard. ok - so now you have a secured ADF application - deploy it on a server and get the URL for that application.  From this point on you'll see the process in the video which deals with the configuration of your ADF Mobile app. First you'll need to enable security for your ADF mobile application, so it will prompt users to provide a user/pass combination. You'll also need to configure security on specific features. And you can have them use remote login pointing to your regular secured ADF application. Next define your Web service data control. Right click on the web service data control to "define Web Service Security". You'll also need to define the adfCredentialStoreKey property for the Web Service data control in the connections.xml file. This should be it. Here is the flow: If you haven't already - you can read more about this in the Mobile developer guide, and Andrejus has a sample for you.

    Read the article

  • Cannot Boot, How to recover

    - by Kendor
    Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

    Read the article

  • How do I know if I'm getting the most out of my video card?

    - by b.long
    My computer at home is a bit lacking, so I want to make sure I'm getting the most out of it while I can. Generally speaking, here are the specs: 4GB Memory AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ × 2 64-bit Ubuntu The terminal shows me the following: me@home:~$ uname -a Linux home 3.0.0-17-generic #30-Ubuntu SMP Thu Mar 8 20:45:39 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux me@home:~$ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] me@home:~$ sudo lshw -C video *-display:0 description: VGA compatible controller product: RV380 [Radeon X600 (PCIE)] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:44 memory:e0000000-efffffff ioport:ac00(size=256) memory:fdef0000-fdefffff memory:fdec0000-fdedffff *-display:1 UNCLAIMED description: Display controller product: RV380 [Radeon X600] vendor: ATI Technologies Inc physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress bus_master cap_list configuration: latency=0 resources: memory:fdee0000-fdeeffff me@home:~$ lspci -nn | grep VGA 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] [1002:5b62] The additional drivers menu in System Settings shows me nothing useful and my attempt at installing ATI's Catalyst Control center (drivers that came with the video card) failed. I believe the latest version of Ubuntu at the time was 9.x. What should I do? Install an old version of Ubuntu 9? Use some alternative driver? UPDATE: I might try my hand at a bit from this answer next: "Installing Catalyst Manually (from AMD/ATI's site)" . From a terminal, fgl_glxgears returns *"fgl_glxgears: command not found"*. Any thoughts?

    Read the article

  • Massive Xubuntu desktop malfunction

    - by viktiglemma
    I'm using Xubuntu 11.04. Before everything worked fine, but when booting today the following happened: 1) Window focus does not leave the first-opened program. This means that if I keep Firefox open, and open a terminal, window focus will never be transferred to the terminal. (EDIT: if I open a terminal first, and then open Firefox, Firefox steals focus) 2) Window menus have disappeared. The maximize, minimize, etc., buttons and menu are gone. 3) In Xfce Settings Manager, the "Window Manager" settings window is empty. There is just a gray screen there, so I cannot modify any window settings. 4) The keyboard shortcuts I had previously defined using the Settings Manager do no longer work. Further, ALT-TAB no longer works for cycling between windows. 5) The mouse pointer does not show when I first log in. I have to log out and log in again (with an invisible pointer) before the mouse shows itself. EDIT: 6) I cannot resize or move the Thunderbird window, but I can move the Firefox window What can I do to troubleshoot this?

    Read the article

< Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >