Search Results

Search found 13892 results on 556 pages for 'employee info starter kit'.

Page 529/556 | < Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >

• /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID

  - by user1495181

  using ubuntu with net-snmp snmp work but in sys.log i see a lot of errors about snmpd.conf snmpd.conf: rwcommunity community 10.0.0.1 rwcommunity community 10.0.0.2 agentAddress udp:10.0.0.1:161 view systemonly included .1.3.6.1.2.1.1 view systemonly included .1.3.6.1.2.1.25.1 # Default access to basic system info rocommunity public default -V systemonly rouser authOnlyUser sysLocation Sitting on the Dock of the Bay sysContact Me <[email protected]> sysServices 72 proc mountd proc ntalkd 4 proc sendmail 10 1 disk / 10000 disk /var 5% includeAllDisks 10% load 12 10 5 trapsink localhost public iquerySecName internalUser rouser internalUser defaultMonitors yes linkUpDownNotifications yes master agentx errors: Sep 12 16:35:00 test snmpd[5485]: payload OID: prNames Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: prNames Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: payload OID: prErrMessage Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: prErrMessage Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: trigger OID: prErrorFlag Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown monitor OID Sep 12 16:35:00 test snmpd[5485]: payload OID: memErrorName Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: memErrorName Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: payload OID: memSwapErrorMsg Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: memSwapErrorMsg Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: trigger OID: memSwapError Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown monitor OID Sep 12 16:35:00 test snmpd[5485]: payload OID: extNames Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: extNames Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: payload OID: extOutput Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: extOutput Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: trigger OID: extResult Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown monitor OID Sep 12 16:35:00 test snmpd[5485]: payload OID: dskPath Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: dskPath Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: payload OID: dskErrorMsg Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: dskErrorMsg Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: trigger OID: dskErrorFlag Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown monitor OID Sep 12 16:35:00 test snmpd[5485]: payload OID: laNames Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: laNames Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: payload OID: laErrMessage Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: laErrMessage Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: trigger OID: laErrorFlag Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown monitor OID Sep 12 16:35:00 test snmpd[5485]: payload OID: fileName Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: fileName Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: payload OID: fileErrorMsg Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: fileErrorMsg Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: trigger OID: fileErrorFlag Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown monitor OID Sep 12 16:35:00 test snmpd[5485]: payload OID: snmperrErrMessage Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown payload OID Sep 12 16:35:00 test snmpd[5485]: Unknown payload OID: snmperrErrMessage Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: Unknown payload OID Sep 12 16:35:00 test snmpd[5485]: trigger OID: snmperrErrorFlag Sep 12 16:35:00 test snmpd[5485]: /usr/local/share/snmp/snmpd.conf: line 5: Error: unknown monitor OID Sep 12 16:35:00 test snmpd[5485]: Turning on AgentX master support. Sep 12 16:35:00 test snmpd[5485]: net-snmp: 33 error(s) in config file(s)

  Read the article

• Juniper SSG-5 subinterface vlan routing to the internet

  - by catfish

  I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• Tomcat 7 ClassNotFoundException: org.apache.tomcat.JarScanner

  - by CodesLikeA_Mokey

  When I try and start my app I get this error. I have verified that JarScanner exists in the CATALINA_HOME directory so I dont know why it cant find it. Is there anything that could lead to this issue starting my app? I noticed that earlier in the same log i find this: [Loaded org.apache.tomcat.JarScanner from file:/usr/local/apache-tomcat-7.0.30/lib/tomcat-api.jar] Here is the actual error further down: Oct 8, 2012 1:24:01 PM org.apache.catalina.core.ContainerBase addChildInternal SEVERE: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: Failed to start component [StandardEngine[Catalina].StandardHost[localhost].StandardContext[/client]] at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:154) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:901) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:877) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:618) at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:650) at org.apache.catalina.startup.HostConfig$DeployDescriptor.run(HostConfig.java:1582) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) Caused by: java.lang.NoClassDefFoundError: org/apache/tomcat/JarScanner at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631) at java.lang.ClassLoader.defineClass(ClassLoader.java:615) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141) at java.net.URLClassLoader.defineClass(URLClassLoader.java:283) at java.net.URLClassLoader.access$000(URLClassLoader.java:58) at java.net.URLClassLoader$1.run(URLClassLoader.java:197) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:295) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) at org.apache.catalina.core.StandardContext.getJarScanner(StandardContext.java:1025) at org.apache.catalina.startup.ContextConfig.processJarsForWebFragments(ContextConfig.java:1911) at org.apache.catalina.startup.ContextConfig.webConfig(ContextConfig.java:1265) at org.apache.catalina.startup.ContextConfig.configureStart(ContextConfig.java:878) at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:369) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119) at org.apache.catalina.util.LifecycleBase.fireLifecycleEvent(LifecycleBase.java:90) at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5173) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150) ... 11 more Caused by: java.lang.ClassNotFoundException: org.apache.tomcat.JarScanner at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) ... 33 more Oct 8, 2012 1:24:01 PM org.apache.catalina.startup.HostConfig deployDescriptor SEVERE: Error deploying configuration descriptor /software/sirsi/tomcat_sbox7/conf/Catalina/localhost/client.xml java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: Failed to start component [StandardEngine[Catalina].StandardHost[localhost].StandardContext[/client]] at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:904) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:877) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:618) at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:650) at org.apache.catalina.startup.HostConfig$DeployDescriptor.run(HostConfig.java:1582) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) Oct 8, 2012 1:24:01 PM org.apache.catalina.startup.HostConfig deployDescriptor INFO: Deploying configuration descriptor /software/sirsi/tomcat_sbox7/conf/Catalina/localhost/custom.xml Oct 8, 2012 1:24:01 PM org.apache.catalina.core.StandardContext setPath WARNING: A context path must either be an empty string or start with a '/'. The path [custom] does not meet these criteria and has been changed to [/custom] Oct 8, 2012 1:24:01 PM org.apache.catalina.startup.SetContextPropertiesRule begin WARNING: [SetContextPropertiesRule]{Context} Setting property 'debug' to '0' did not find a matching property. Oct 8, 2012 1:24:01 PM org.apache.catalina.core.ContainerBase addChildInternal SEVERE: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: Failed to start component [StandardEngine[Catalina].StandardHost[localhost].StandardContext[/custom]] at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:154) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:901) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:877) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:618) at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:650) at org.apache.catalina.startup.HostConfig$DeployDescriptor.run(HostConfig.java:1582) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) Caused by: java.lang.NoClassDefFoundError: org/apache/tomcat/util/scan/StandardJarScanner at org.apache.catalina.core.StandardContext.getJarScanner(StandardContext.java:1025) at org.apache.catalina.startup.ContextConfig.processJarsForWebFragments(ContextConfig.java:1911) at org.apache.catalina.startup.ContextConfig.webConfig(ContextConfig.java:1265) at org.apache.catalina.startup.ContextConfig.configureStart(ContextConfig.java:878) at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:369) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119) at org.apache.catalina.util.LifecycleBase.fireLifecycleEvent(LifecycleBase.java:90) at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5173) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150) ... 11 more Oct 8, 2012 1:24:01 PM org.apache.catalina.startup.HostConfig deployDescriptor SEVERE: Error deploying configuration descriptor /software/sirsi/tomcat_sbox7/conf/Catalina/localhost/custom.xml java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: Failed to start component [StandardEngine[Catalina].StandardHost[localhost].StandardContext[/custom]] at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:904) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:877) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:618) at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:650) at org.apache.catalina.startup.HostConfig$DeployDescriptor.run(HostConfig.java:1582) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662)

  Read the article

• Setting up a VPN connection to Amazon VPC - routing

  - by Keeno

  I am having some real issues setting up a VPN between out office and AWS VPC. The "tunnels" appear to be up, however I don't know if they are configured correctly. The device I am using is a Netgear VPN Firewall - FVS336GV2 If you see in the attached config downloaded from VPC (#3 Tunnel Interface Configuration), it gives me some "inside" addresses for the tunnel. When setting up the IPsec tunnels do I use the inside tunnel IP's (e.g. 169.254.254.2/30) or do I use my internal network subnet (10.1.1.0/24) I have tried both, when I tried the local network (10.1.1.x) the tracert stops at the router. When I tried with the "inside" ips, the tracert to the amazon VPC (10.0.0.x) goes out over the internet. this all leads me to the next question, for this router, how do I set up stage #4, the static next hop? What are these seemingly random "inside" addresses and where did amazon generate them from? 169.254.254.x seems odd? With a device like this, is the VPN behind the firewall? I have tweaked any IP addresses below so that they are not "real". I am fully aware, this is probably badly worded. Please if there is any further info/screenshots that will help, let me know. Amazon Web Services Virtual Private Cloud IPSec Tunnel #1 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Your Customer Gateway must be configured with a tunnel interface that is associated with the IPSec tunnel. All traffic transmitted to the tunnel interface is encrypted and transmitted to the Virtual Private Gateway. The Customer Gateway and Virtual Private Gateway each have two addresses that relate to this IPSec tunnel. Each contains an outside address, upon which encrypted traffic is exchanged. Each also contain an inside address associated with the tunnel interface. The Customer Gateway outside IP address was provided when the Customer Gateway was created. Changing the IP address requires the creation of a new Customer Gateway. The Customer Gateway inside IP address should be configured on your tunnel interface. Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.42 Inside IP Addresses - Customer Gateway : 169.254.254.2/30 - Virtual Private Gateway : 169.254.254.1/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: To route traffic between your internal network and your VPC, you will need a static route added to your router. Static Route Configuration Options: - Next hop : 169.254.254.1 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. IPSec Tunnel #2 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.46 Inside IP Addresses - Customer Gateway : 169.254.254.6/30 - Virtual Private Gateway : 169.254.254.5/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: Static Route Configuration Options: - Next hop : 169.254.254.5 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. EDIT #1 After writing this post, I continued to fiddle and something started to work, just not very reliably. The local IPs to use when setting up the tunnels where indeed my network subnets. Which further confuses me over what these "inside" IP addresses are for. The problem is, results are not consistent what so ever. I can "sometimes" ping, I can "sometimes" RDP using the VPN. Sometimes, Tunnel 1 or Tunnel 2 can be up or down. When I came back into work today, Tunnel 1 was down, so I deleted it and re-created it from scratch. Now I cant ping anything, but Amazon AND the router are telling me tunnel 1/2 are fine. I guess the router/vpn hardware I have just isnt up to the job..... EDIT #2 Now Tunnel 1 is up, Tunnel 2 is down (I didn't change any settings) and I can ping/rdp again. EDIT #3 Screenshot of route table that the router has built up. Current state (tunnel 1 still up and going string, 2 is still down and wont re-connect)

  Read the article

• This file does not have a program associated with it for performing

  - by Abu Hamzah

  update 2: HKEY_CLASSES_ROOT\folder ContentViewModeLayoutPatternForBrowse REG_SZ delta ContentViewModeForBrowse REG_SZ prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified ContentViewModeLayoutPatternForSearch REG_SZ alpha ContentViewModeForSearch REG_SZ prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay (Default) REG_SZ Folder EditFlags REG_BINARY D2030000 FullDetails REG_SZ prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size NoRecentDocs REG_SZ ThumbnailCutoff REG_DWORD 0x0 TileInfo REG_SZ prop:System.Title;System.ItemTypeText HKEY_CLASSES_ROOT\folder\DefaultIcon (Default) REG_EXPAND_SZ %SystemRoot%\System32\shell32.dll,3 HKEY_CLASSES_ROOT\folder\shell HKEY_CLASSES_ROOT\folder\shell\explore HKEY_CLASSES_ROOT\folder\shell\explore\command HKEY_CLASSES_ROOT\folder\shell\open MultiSelectModel REG_SZ Document HKEY_CLASSES_ROOT\folder\shell\open\command DelegateExecute REG_SZ {11dbb47c-a525-400b-9e80-a54615a090c0} (Default) REG_EXPAND_SZ %SystemRoot%\Explorer.exe HKEY_CLASSES_ROOT\folder\shell\opennewprocess MUIVerb REG_SZ @shell32.dll,-8518 MultiSelectModel REG_SZ Document Extended REG_SZ LaunchExplorerFlags REG_DWORD 0x3 ExplorerHost REG_SZ {ceff45ee-c862-41de-aee2-a022c81eda92} HKEY_CLASSES_ROOT\folder\shell\opennewprocess\command DelegateExecute REG_SZ {11dbb47c-a525-400b-9e80-a54615a090c0} HKEY_CLASSES_ROOT\folder\shell\opennewwindow MUIVerb REG_SZ @shell32.dll,-8517 MultiSelectModel REG_SZ Document OnlyInBrowserWindow REG_SZ LaunchExplorerFlags REG_DWORD 0x1 HKEY_CLASSES_ROOT\folder\shell\opennewwindow\command DelegateExecute REG_SZ {11dbb47c-a525-400b-9e80-a54615a090c0} HKEY_CLASSES_ROOT\folder\ShellEx HKEY_CLASSES_ROOT\folder\ShellEx\ColumnHandlers HKEY_CLASSES_ROOT\folder\ShellEx\ColumnHandlers\{0561EC90-CE54-4f0c-9C55-E226110A740C} (Default) REG_SZ Haali Column Provider HKEY_CLASSES_ROOT\folder\ShellEx\ColumnHandlers\{F9DB5320-233E-11D1-9F84-707F02C10627} (Default) REG_SZ PDF Column Info HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\Adobe.Acrobat.ContextMenu (Default) REG_SZ {D25B2CAB-8A9A-4517-A9B2-CB5F68A5A802} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\BriefcaseMenu (Default) REG_SZ {85BBD920-42A0-1069-A2E4-08002B30309D} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\ESET Smart Security - Context Menu Shell Extension (Default) REG_SZ {B089FE88-FB52-11D3-BDF1-0050DA34150D} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\LavasoftShellExt (Default) REG_SZ {DCE027F7-16A4-4BEE-9BE7-74F80EE3738F} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\Library Location (Default) REG_SZ {3dad6c5d-2167-4cae-9914-f99e41c12cfa} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\MagicISO (Default) REG_SZ {DB85C504-C730-49DD-BEC1-7B39C6103B7A} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\MBAMShlExt (Default) REG_SZ {57CE581A-0CB6-4266-9CA0-19364C90A0B3} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\WinRAR (Default) REG_SZ {B41DB860-8EE4-11D2-9906-E49FADC173CA} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\WS_FTP (Default) REG_SZ {797F3885-5429-11D4-8823-0050DA59922B} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\XXX Groove GFS Context Menu Handler XXX (Default) REG_SZ {6C467336-8281-4E60-8204-430CED96822D} HKEY_CLASSES_ROOT\folder\ShellEx\DragDropHandlers HKEY_CLASSES_ROOT\folder\ShellEx\DragDropHandlers\WinRAR (Default) REG_SZ {B41DB860-8EE4-11D2-9906-E49FADC173CA} HKEY_CLASSES_ROOT\folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000} (Default) REG_SZ HKEY_CLASSES_ROOT\folder\ShellEx\PropertySheetHandlers HKEY_CLASSES_ROOT\folder\ShellEx\PropertySheetHandlers\BriefcasePage (Default) REG_SZ {85BBD920-42A0-1069-A2E4-08002B30309D} HKEY_CLASSES_ROOT\folder\ShellNew Directory REG_SZ IconPath REG_EXPAND_SZ %SystemRoot%\system32\shell32.dll,3 ItemName REG_SZ @shell32.dll,-30396 MenuText REG_SZ @shell32.dll,-30317 NonLFNFileSpec REG_SZ @shell32.dll,-30319 HKEY_CLASSES_ROOT\folder\ShellNew\Config AllDrives REG_SZ IsFolder REG_SZ NoExtension REG_SZ update: HKEY_CLASSES_ROOT\Directory AlwaysShowExt REG_SZ (Default) REG_SZ File Folder EditFlags REG_BINARY D2010000 FriendlyTypeName REG_SZ @shell32.dll,-10152 FullDetails REG_SZ prop:System.PropGroup.Description;System.DateCreated;System.FileCount;System.TotalFileSize InfoTip REG_SZ prop:System.Comment;System.DateCreated NoRecentDocs REG_SZ PreviewDetails REG_SZ prop:System.DateModified;*System.SharedWith;*System.OfflineAvailability;*System.OfflineStatus PreviewTitle REG_SZ prop:System.ItemNameDisplay;System.ItemTypeText HKEY_CLASSES_ROOT\Directory\Background HKEY_CLASSES_ROOT\Directory\Background\shell HKEY_CLASSES_ROOT\Directory\Background\shell\cmd (Default) REG_SZ @shell32.dll,-8506 Extended REG_SZ NoWorkingDirectory REG_SZ HKEY_CLASSES_ROOT\Directory\Background\shell\cmd\command (Default) REG_SZ cmd.exe /s /k pushd "%V" HKEY_CLASSES_ROOT\Directory\Background\shellex HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\Gadgets (Default) REG_SZ {6B9228DA-9C15-419e-856C-19E768A13BDC} HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\igfxcui (Default) REG_SZ {3AB1675A-CCFF-11D2-8B20-00A0C93CB1F4} HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New (Default) REG_SZ {D969A300-E7FF-11d0-A93B-00A0C90F2719} HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\Sharing (Default) REG_SZ {f81e9010-6ea4-11ce-a7ff-00aa003ca9f6} HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\XXX Groove GFS Context Menu Handler XXX (Default) REG_SZ {6C467336-8281-4E60-8204-430CED96822D} HKEY_CLASSES_ROOT\Directory\DefaultIcon (Default) REG_EWindows Windows XPAND_SZ %SystemRoot%\System32\shell32.dll,3 HKEY_CLASSES_ROOT\Directory\shell (Default) REG_SZ none HKEY_CLASSES_ROOT\Directory\shell\cmd (Default) REG_SZ @shell32.dll,-8506 Extended REG_SZ NoWorkingDirectory REG_SZ HKEY_CLASSES_ROOT\Directory\shell\cmd\command (Default) REG_SZ cmd.exe /s /k pushd "%V" HKEY_CLASSES_ROOT\Directory\shell\find LegacyDisable REG_SZ SuppressionPolicy REG_DWORD 0x80 HKEY_CLASSES_ROOT\Directory\shell\find\command (Default) REG_EWindows Windows XPAND_SZ %SystemRoot%\EWindows Windows XPlorer.exe DelegateExecute REG_SZ {a015411a-f97d-4ef3-8425-8a38d022aebc} HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec (Default) REG_SZ [FindFolder("%l", %I)] NoActivateHandler REG_SZ HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\application (Default) REG_SZ Folders HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\topic (Default) REG_SZ AppProperties HKEY_CLASSES_ROOT\Directory\shell\OneNote.Open (Default) REG_SZ Open as Notebook in OneNote HKEY_CLASSES_ROOT\Directory\shell\OneNote.Open\Command (Default) REG_SZ C:\PROGRA~1\Microsoft Office\Office12\ONENOTE.EXE "%L" HKEY_CLASSES_ROOT\Directory\shellex HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\CuteFTP 8 Professional (Default) REG_SZ {8f7261d0-d2b9-11d2-9909-00605205b24c} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EncryptionMenu (Default) REG_SZ {A470F8CF-A1E8-4f65-8335-227475AA5C46} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\MagicISO (Default) REG_SZ {DB85C504-C730-49DD-BEC1-7B39C6103B7A} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing (Default) REG_SZ {f81e9010-6ea4-11ce-a7ff-00aa003ca9f6} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\ShellExtension HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\WinRAR (Default) REG_SZ {B41DB860-8EE4-11D2-9906-E49FADC173CA} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\XXX Groove GFS Context Menu Handler XXX (Default) REG_SZ {6C467336-8281-4E60-8204-430CED96822D} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\{596AB062-B4D2-4215-9F74-E9109B0A8153} HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\FileSystem (Default) REG_SZ {217FC9C0-3AEA-1069-A2DB-08002B30309D} HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Sharing (Default) REG_SZ {40dd6e20-7c17-11ce-a804-00aa003ca9f6} HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WinRAR (Default) REG_SZ {B41DB860-8EE4-11D2-9906-E49FADC173CA} HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WS_FTP (Default) REG_SZ {1D83C7B3-C931-4850-BED0-D3FE8B3F5808} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing (Default) REG_SZ {f81e9010-6ea4-11ce-a7ff-00aa003ca9f6} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{1f2e5c40-9550-11ce-99d2-00aa006e086c} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{4a7ded0a-ad25-11d0-98a8-0800361b1103} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{596AB062-B4D2-4215-9F74-E9109B0A8153} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{ECCDF543-45CC-11CE-B9BF-0080C87CDBA6} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{ef43ecfe-2ab9-4632-bf21-58909dd177f0} (Default) REG_SZ I updated my IE9 from IE8 and after I reboot my machine and try to access my computer drive and I get this error message whenever I try to double click c:\ drive or other drives but other than that everything seems to be working fince except that I can not access my drives.... its very strange any help? <<<This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel>>> using Windows 7 32 bit

  Read the article

• Howto WCF Service HTTPS Binding and Endpoint Configuration in IIS with Load Balancer?

  - by Mike G

  We have a WCF service that is being hosted on a set of 12 machines. There is a load balancer that is a gateway to these machines. Now the site is setup as SSL; as in a user accesses it through using an URL with https. I know this much, the URL that addresses the site is https, but none of the servers has a https binding or is setup to require SSL. This leads me to believe that the load balancer handles the https and the connection from the balancer to the servers are unencrypted (this takes place behind the firewall so no biggie there). The problem we're having is that when a Silverlight client tries to access a WCF service it is getting a "Not Found" error. I've set up a test site along with our developer machines and have made sure that the bindings and endpoints in the web.config work with the client. It seems to be the case in the production environment that we get this error. Is there anything wrong with the following web.config? Should we be setting up how https is handled in a different manner? We're at a loss on this currently since I've tried every programmatic solution with endpoints and bindings. None of the solutions I have found deal with a load balancer in the manner we're dealing. Web.config service model info: <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="TradePMR.OMS.Framework.Services.CRM.CRMServiceBehavior"> <serviceMetadata httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> <behavior name="TradePMR.OMS.Framework.Services.AccountAggregation.AccountAggregationBehavior"> <serviceMetadata httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <customBinding> <binding name="SecureCRMCustomBinding"> <binaryMessageEncoding /> <httpsTransport /> </binding> <binding name="SecureAACustomBinding"> <binaryMessageEncoding /> <httpsTransport /> </binding> </customBinding> <mexHttpsBinding> <binding name="SecureMex" /> </mexHttpsBinding> </bindings> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <!--Defines the services to be used in the application--> <services> <service behaviorConfiguration="TradePMR.OMS.Framework.Services.CRM.CRMServiceBehavior" name="TradePMR.OMS.Framework.Services.CRM.CRMService"> <endpoint address="" binding="customBinding" bindingConfiguration="SecureCRMCustomBinding" contract="TradePMR.OMS.Framework.Services.CRM.CRMService" name="SecureCRMEndpoint" /> <!--This is required in order to be able to use the "Update Service Reference" in the Silverlight application--> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> <service behaviorConfiguration="TradePMR.OMS.Framework.Services.AccountAggregation.AccountAggregationBehavior" name="TradePMR.OMS.Framework.Services.AccountAggregation.AccountAggregation"> <endpoint address="" binding="customBinding" bindingConfiguration="SecureAACustomBinding" contract="TradePMR.OMS.Framework.Services.AccountAggregation.AccountAggregation" name="SecureAAEndpoint" /> <!--This is required in order to be able to use the "Update Service Reference" in the Silverlight application--> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> </system.serviceModel> </configuration> The ServiceReferences.ClientConfig looks like this: <configuration> <system.serviceModel> <bindings> <customBinding> <binding name="StandardAAEndpoint"> <binaryMessageEncoding /> <httpTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" /> </binding> <binding name="SecureAAEndpoint"> <binaryMessageEncoding /> <httpsTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" /> </binding> <binding name="StandardCRMEndpoint"> <binaryMessageEncoding /> <httpTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" /> </binding> <binding name="SecureCRMEndpoint"> <binaryMessageEncoding /> <httpsTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" /> </binding> </customBinding> </bindings> <client> <endpoint address="https://Service2.svc" binding="customBinding" bindingConfiguration="SecureAAEndpoint" contract="AccountAggregationService.AccountAggregation" name="SecureAAEndpoint" /> <endpoint address="https://Service1.svc" binding="customBinding" bindingConfiguration="SecureCRMEndpoint" contract="CRMService.CRMService" name="SecureCRMEndpoint" /> </client> </system.serviceModel> </configuration> (The addresses are of no consequence since those are dynamically built so that they will point to a dev's machine or to the production server)

  Read the article

• All my emails to Yahoo!, Hotmail and AOL are going to Spam, though I've implemented every validation

  - by Chetan

  Hi, I've implemented everything and checked everything (SPF, DomainKey, DKIM, reverse lookup), and only Gmail is allowing my emails to go to Inbox. Yahoo, Hotmail and AOL are all sending my messages to Spam. What am I doing wrong? Please help! Following are the headers of messages to Yahoo, Hotmail and AOL. I've changed names and domain names. The domain names I'm sending mail from are polluxapp.com and gemini.polluxapp.com. Yahoo: From Shift Licensing Tue Jan 26 21:55:14 2010 X-Apparently-To: [email protected] via 98.136.167.163; Tue, 26 Jan 2010 13:59:12 -0800 Return-Path: X-YahooFilteredBulk: 208.115.108.162 X-YMailISG: gPlFT1YWLDtTsHSCXAO2fxuGq5RdrsMxPffmkJFHiQyZW.2RGdDQ8OEpzWDYPS.MS_D5mvpu928sYN_86mQ2inD9zVLaVNyVVrmzIFCOHJO2gPwIG8c2L8WajG4ZRgoTwMFHkyEsefYtRLMg8AmHKnkS0PkPscwpVHtuUD91ghsTSqs4lxEMqhqw60US0cwMn_r_DrWNEUg_sESZsYeZpJcCCPL0wd6zcfKmtYaIkidsth3gWJPJgpwWtkgPvwsJUU_cmAQ8hAQ7RVM1usEs80PzihTLDR1yKc4RJCsesaf4NUO_yN1cPsbFyiaazKikC.eiQk4Z3VU.8O5Vd8i7mPNyOeAjyt7IgeA_ X-Originating-IP: [208.115.108.162] Authentication-Results: mta1035.mail.sk1.yahoo.com from=example.com; domainkeys=pass (ok); from=example.com; dkim=permerror (bad sig) Received: from 127.0.0.1 (EHLO gemini.example.com) (208.115.108.162) by mta1035.mail.sk1.yahoo.com with SMTP; Tue, 26 Jan 2010 13:59:12 -0800 Received: from gemini.example.com (gemini [127.0.0.1]) by gemini.example.com (Postfix) with ESMTP id 3984E21A0167 for ; Tue, 26 Jan 2010 13:55:14 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=example.com; h=to :subject:from:content-type:message-id:date; s=mail; bh=bRIHfxE3S e+YeCrIOqziZsiESJA=; b=J+D56Czff+6wGjQycLEvHyT32+06Nngf+6h7Ep6DL SmmJv3ihiAFJIJiPxiwLNpUsOSHhwJYjYQtynbBnag40A6EUBIsucDR+VoEYD+Cc 9L0dV3QD5D77VpG9PnRQDQa91R+NPIt5og9xbYfUWJ1b/jXkZopb0VTM+H9tandM 24= DomainKey-Signature: a=rsa-sha1; c=nofws; d=example.com; h=to:subject :from:content-type:message-id:date; q=dns; s=mail; b=pO5YvvjGTXs 3Qa83Ibq9woLq5VSsxUD5uoSrjNrW9ICMmdWyJpb9oT5byFR9hMthomTmfGWkkh6 3VxtD0hb0HVonN+1iheqJ9QBBOctadLCAOPZV3mfA99XUu7Y0DR2qtkU/UkSe8In 5PENWFbwub88ZsRDiW3hCbNHl+UO8Jsc= Received: by gemini.example.com (Postfix, from userid 502) id 386DE21A0166; Tue, 26 Jan 2010 13:55:14 -0800 (PST) To: [email protected] Subject: Shift License For James Xavier From: "Shift Licensing" Content-type: text/html Message-Id: <[email protected] Date: Tue, 26 Jan 2010 13:55:14 -0800 (PST) Content-Length: 282` Hotmail: X-Message-Delivery: Vj0xLjE7dXM9MDtsPTA7YT0wO0Q9MjtTQ0w9Ng== X-Message-Status: n:0 X-SID-PRA: [email protected] X-AUTH-Result: NONE X-Message-Info: 6sSXyD95QpWzUBaRfzf3NMbaiSGCCYGXSczlzLw49r01I25elu3oYM0V2uNa8BV2O7DOiFEeewTBKMtN+PW+ig== Received: from gemini.example.com ([208.115.108.162]) by snt0-mc4-f7.Snt0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Tue, 26 Jan 2010 13:18:53 -0800 Received: from gemini.example.com (gemini [127.0.0.1]) by gemini.example.com (Postfix) with ESMTP id 9431321A0167 for ; Tue, 26 Jan 2010 13:18:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=gemini.example.com; h=to :subject:message-id:date:from; s=mail; bh=DLF0k+uELpY6If5o3SWlSj 7j0vw=; b=nAMpb47xTVh73y6a2rf6V1rtYHuufr46dtuwWtHyFC85QKfZJReJJL oFIPjgEC28/1wSdy8VbfLG1g64W1hvnJjet3rcyv3ANNYxnFaiH5yt3SDEiLxydS gjCmNcZXyiVsWtpv7atVRO/t/Own+oFB9zz/9mj43Bhm4bnZ2cTno= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gemini.example.com; h=to :subject:message-id:date:from; q=dns; s=mail; b=sFpNxlskyz4MYT38 BA/rQ6ZAcQjhy7STkLPckrCDVVZcE4/zukHyARq7guMtYCCEjXoIbVEtNikPC97F cGpJGGZrppTGjx62N0flxG8hvwejiJYnUJF1EIP4JckGWyEI+21vtWLLQ27eegtN fs9OkIQ2iUPC/4u8N1eqiff0VZU= Received: by gemini.example.com (Postfix, from userid 504) id 8ED7221A0166; Tue, 26 Jan 2010 13:18:53 -0800 (PST) To: [email protected] Subject: Testing this Message-Id: <[email protected] Date: Tue, 26 Jan 2010 13:18:53 -0800 (PST) From: [email protected] Return-Path: [email protected] X-OriginalArrivalTime: 26 Jan 2010 21:18:54.0039 (UTC) FILETIME=[29CEE670:01CA9ECD] AOL: X-AOL-UID: 3158.1902377530 X-AOL-DATE: Tue, 26 Jan 2010 5:07:23 PM Eastern Standard Time Return-Path: Received: from rly-mg06.mx.aol.com (rly-mg06.mail.aol.com [172.20.83.112]) by air-mg06.mail.aol.com (v126.13) with ESMTP id MAILINMG061-a1d4b5f6787a4; Tue, 26 Jan 2010 17:07:22 -0500 Received: from gemini.example.com (gemini.example.com [208.115.108.162]) by rly-mg06.mx.aol.com (v125.7) with ESMTP id MAILRELAYINMG067-a1d4b5f6787a4; Tue, 26 Jan 2010 17:07:04 -0500 Received: from gemini.example.com (gemini [127.0.0.1]) by gemini.example.com (Postfix) with ESMTP id 32B3821A0167 for ; Tue, 26 Jan 2010 14:07:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=gemini.example.com; h=to :subject:message-id:date:from; s=mail; bh=RL0GLHd3dZ8IlIHoHIhA/U cLtUE=; b=BKg4p3qnaIdFRjAbvUa+Hwcyc6W91v4B4hN95dVymJrxyUBycWMUSC nzKmJ5QllhCYjwO+S7GrRdmlFpjBaK8kt2qmdCyC2UuiDF6xY6MXx/DBF56QpYtZ YDY4kXdiEMSbooH14B4CCPhaCTdC1wCtV0diat3EANCLxSDYAYq5k= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gemini.example.com; h=to :subject:message-id:date:from; q=dns; s=mail; b=fDSjNpfWs7TfGXda uio8qbJIyD+UmPL+C0GM1VeeV8FADj6JiYIT1nT3iBwSHlrLFCJ1wxPbE4d9CGl8 gQkPIV6T4TL7ha052nur0EOWoBLoBAOmhTshF/gsIY+/KMibbIczuRyTgIGVV5Tw GZVGFddVFOYgee7SAu0KNFm7aIk= Received: by gemini.example.com (Postfix, from userid 504) id 2D5F521A0166; Tue, 26 Jan 2010 14:07:03 -0800 (PST) To: [email protected] Subject: Testing Message-Id: <[email protected] Date: Tue, 26 Jan 2010 14:07:03 -0800 (PST) From: [email protected] X-AOL-IP: 208.115.108.162 X-AOL-SCOLL-AUTHENTICATION: mail_rly_antispam_dkim-d227.1 ; domain : gemini.example.com DKIM : pass X-Mailer: Unknown (No Version) Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit

  Read the article

• Linux Server hacked?

  - by user115848

  I'm trying to determine if this linex webserver/openfire server has been compromised by some form of malware or a hacker. Can you please help me determine if this server has been hacked? The snippet of logs below are from the linux server running apache. A few days ago the moodle site, which is installed on the server, started to render the apache default page. Also the access logs show some activity im not sure of. Please see logs below. 85.190.0.3 - - [02/Apr/2012:13:31:01 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:13:31:01 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 99.41.69.92 - - [02/Apr/2012:13:33:35 -0600] "GET /files/externallibs.php HTTP/1.1" 404 306 "-" "curl/7.18.0 (x86_64-pc-linux-gnu) libcurl/7.18.0 OpenSSL/0.9.8g zlib/1.2.3.3 libidn/1.1" 212.34.151.92 - - [02/Apr/2012:14:01:46 -0600] "GET /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "-" "Mozilla/4.0 (compatible; MSIE 6.0; MSIE 5.5; Windows NT 5.1) Opera 7.01 [en]" 212.34.151.92 - - [02/Apr/2012:14:01:46 -0600] "POST /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "http://173.164.35.181/phpmyadmin/scripts/setup.php\r" "Mozilla/4.0 (compatible; MSIE 6.0; MSIE 5.5; Windows NT 5.1) Opera 7.01 [en]" 82.223.140.4 - - [02/Apr/2012:14:05:03 -0600] "GET /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "-" "Mozilla/4.0 (compatible; MSIE 6.0; MSIE 5.5; Windows NT 5.1) Opera 7.01 [en]" 82.223.140.4 - - [02/Apr/2012:14:05:04 -0600] "POST /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "_http://173.164.35.181/phpmyadmin/scripts/setup.php\r" "Mozilla/4.0 (compatible; MSIE 6.0; MSIE 5.5; Windows NT 5.1) Opera 7.01 [en]" 10.0.0.100 - - [02/Apr/2012:14:25:35 -0600] "GET / HTTP/1.1" 403 5043 "-" "Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.15) Gecko/20110330 CentOS/3.6-1.el5.centos Firefox/3.6.15" 10.0.0.100 - - [02/Apr/2012:14:25:38 -0600] "GET /favicon.ico HTTP/1.1" 404 295 "-" "Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.15) Gecko/20110330 CentOS/3.6-1.el5.centos Firefox/3.6.15" 50.17.41.60 - - [02/Apr/2012:14:27:29 -0600] "HEAD /icons/apache_pb.gif HTTP/1.0" 200 - "-" "Mozilla/5.0 (compatible; NetcraftSurveyAgent/1.0; [email protected])" 85.190.0.3 - - [02/Apr/2012:14:42:33 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:14:42:33 -0600] "POST _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:14:42:33 -0600] "GET _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:14:42:36 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:03:48 -0600] "POST _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:03:48 -0600] "GET _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:03:48 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:03:48 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 66.233.63.54 - - [02/Apr/2012:15:12:19 -0600] "GET /files/externallibs.php HTTP/1.1" 404 306 "-" "Mozilla/5.0 (Windows NT 6.0; WOW64; rv:11.0) Gecko/20100101 Firefox/11.0" 70.114.161.135 - - [02/Apr/2012:15:17:12 -0600] "GET /files/externallibs.php HTTP/1.1" 404 306 "-" "Mozilla/5.0 (Windows NT 5.1; rv:11.0) Gecko/20100101 Firefox/11.0" 99.41.69.231 - - [02/Apr/2012:15:52:21 -0600] "GET /files/externallibs.php HTTP/1.1" 404 306 "-" "curl/7.18.0 (x86_64-pc-linux-gnu) libcurl/7.18.0 OpenSSL/0.9.8g zlib/1.2.3.3 libidn/1.1" 85.190.0.3 - - [02/Apr/2012:15:55:40 -0600] "GET _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:55:40 -0600] "POST _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:55:40 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:55:40 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 10.0.0.253 - - [02/Apr/2012:16:01:45 -0600] "GET / HTTP/1.1" 403 5043 "-" "WWW-Mechanize/1.0.0 (http://rubyforge.org/projects/mechanize/)" 10.0.0.253 - - [02/Apr/2012:16:02:27 -0600] "GET / HTTP/1.1" 403 5043 "-" "WWW-Mechanize/1.0.0 (http://rubyforge.org/projects/mechanize/)" 85.190.0.3 - - [02/Apr/2012:16:13:40 -0600] "POST _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:13:40 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:13:40 -0600] "GET _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:13:40 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 89.135.124.125 - - [02/Apr/2012:16:20:47 -0600] "GET /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "_http://173.164.35.181/phpmyadmin/scripts/setup.php" "Opera" 89.135.124.125 - - [02/Apr/2012:16:20:48 -0600] "POST /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "_http://173.164.35.181/phpmyadmin/scripts/setup.php" "Opera" 85.190.0.3 - - [02/Apr/2012:16:29:59 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:29:59 -0600] "GET http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:29:59 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:29:59 -0600] "POST http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-"

  Read the article

• Exim mail server slow on sending through SMTP

  - by catalint

  It takes about 30 seconds for the server to send me the banner, but initial connection is done instantly only happens when I am at the office, from home it works fine at the office I have a rRns set-up for my client ip that it's not working. Server: Exim, public fixed ip, rDNS, no ports blocked, in a datacenter Config: hostlist loopback = <; 127.0.0.0/8 ; 0.0.0.0 ; ::1 ; 0000:0000:0000:0000:0000:ffff:7f00:0000/8 hostlist senderverifybypass_hosts = net-iplsearch;/etc/senderverifybypasshosts hostlist skipsmtpcheck_hosts = net-iplsearch;/etc/skipsmtpcheckhosts hostlist spammeripblocks = net-iplsearch;/etc/spammeripblocks hostlist backupmx_hosts = lsearch;/etc/backupmxhosts hostlist trustedmailhosts = lsearch;/etc/trustedmailhosts domainlist user_domains = ${if exists{/etc/userdomains} {lsearch;/etc/userdomains} fail} This happens super fast on the server: 30132 ident connection to 89.238.207.49 failed: Connection refused 30132 sender_fullhost = [89.238.207.49] 30132 sender_rcvhost = [89.238.207.49] 30132 Process 30132 is handling incoming connection from [89.238.207.49] 30132 host in host_lookup? no (option unset) 30132 set_process_info: 30132 handling incoming connection from [89.238.207.49] 30132 host in host_reject_connection? no (option unset) 30132 host in sender_unqualified_hosts? no (option unset) 30132 host in recipient_unqualified_hosts? no (option unset) 30132 host in helo_verify_hosts? no (option unset) 30132 host in helo_try_verify_hosts? no (option unset) 30132 host in helo_accept_junk_hosts? yes (matched "*") 30132 using ACL "acl_connect" 30132 processing "accept" 30132 check hosts = +trustedmailhosts 30132 sender host name required, to match against lsearch;/etc/trustedmailhosts 30132 looking up host name for 89.238.207.49 30132 IP address lookup yielded relay.easycomm.ro Client side 2011.09.14 13:08:13 SMTP (mail.server.ro): Begin execution 2011.09.14 13:08:13 SMTP (mail.server.ro): Port: 465, Secure: SSL, SPA: no 2011.09.14 13:08:13 SMTP (mail.server.ro): Finding host 2011.09.14 13:08:13 SMTP (mail.server.ro): Connecting to host 2011.09.14 13:08:13 SMTP (mail.server.ro): Securing connection 2011.09.14 13:08:13 SMTP (mail.server.ro): Connected to host ---> This is a 1 minute 5 seconds gap 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220-genius.filipnet.ro ESMTP Exim 4.69 #1 Wed, 14 Sep 2011 13:09:26 +0300 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220-We do not authorize the use of this system to transport unsolicited, 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220 and/or bulk e-mail. 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] EHLO CatalinDell 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-genius.filipnet.ro Hello CatalinDell [89.238.207.49] 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-SIZE 52428800 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-PIPELINING 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-AUTH PLAIN LOGIN 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 HELP 2011.09.14 13:09:18 SMTP (mail.server.ro): Authorizing to server 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] AUTH LOGIN 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 334 VXNlcm5hbWU6 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] dGVzdEBzcG9ydGd1cnUucm8= 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 334 UGFzc3dvcmQ6 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] ***** 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 235 Authentication succeeded 2011.09.14 13:09:18 SMTP (mail.server.ro): Authorized to host 2011.09.14 13:09:18 SMTP (mail.server.ro): Connected to host 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] MAIL FROM: <*****> 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 OK 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] RCPT TO: <*****> 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 Accepted 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] DATA 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 354 Enter message, ending with "." on a line by itself 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] . ---> This is a 1 minute 10 seconds gap 2011.09.14 13:10:28 SMTP (mail.server.ro): <rx> 250 OK id=1R3mPG-0004T4-7Q 2011.09.14 13:10:28 SMTP (mail.server.ro): End execution --- Initial info I've setup an email account on "Windows Live Mail" that comes with Windows 7 Receiving is super fast, but for some reason sending is very slow, I had to increase the outgoing timeout to 3 minutes in order to make it work. Server software is Exim / Dovecot / cPanel. Do you have any ideeas why there is a slow sending process? Thank you!

  Read the article

• Linux IPTables / routing issue

  - by Jon

  Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

  Read the article

• nginx can't load images,css,js

  - by EquinoX

  When I point to a URL in nginx where it has images extension such as: http://50.56.81.42/phpMyAdmin/themes/original/img/logo_right.png (as example) it gives me the 404 error as it can't find the file, but the file is actually there. What is potentially wrong? UPDATE: Here's the error log that I was able to pull out: 2011/02/27 05:53:29 [error] 18679#0: *225 open() "/usr/local/nginx/html/phpMyAdmin/js/mooRainbow/mooRainbow.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/js/mooRainbow/mooRainbow.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *226 open() "/usr/local/nginx/html/phpMyAdmin/print.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/print.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *228 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/logo_right.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/logo_right.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *223 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/b_help.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/b_help.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *227 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/s_warn.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/s_warn.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *227 open() "/usr/local/nginx/html/phpMyAdmin/favicon.ico" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/favicon.ico HTTP/1.1", host: "50.56.81.42" 2011/02/27 05:54:39 [error] 18679#0: *237 open() "/usr/local/nginx/html/phpMyAdmin/print.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/print.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *235 open() "/usr/local/nginx/html/phpMyAdmin/js/mooRainbow/mooRainbow.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/js/mooRainbow/mooRainbow.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *238 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/logo_right.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/logo_right.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *239 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/b_help.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/b_help.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *233 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/s_warn.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/s_warn.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *233 open() "/usr/local/nginx/html/phpMyAdmin/favicon.ico" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/favicon.ico HTTP/1.1", host: "50.56.81.42" Here's my nginx.conf file, in case I am missing something: #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; server { listen 80; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; location / { root html; index index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.(js|css|png|jpg|jpeg|gif|ico|html)$ { expires max; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root /usr/share/nginx/html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one location ~ /\.ht { deny all; } } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} } What does this mean? It can't pull out the .css, etc....

  Read the article

• Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

  - by 2020mobile

  Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

  Read the article

• Bind9 as a caching resolver fails with mismatch ID on localhost but not external IP

  - by argibbs

  I'm running Ubuntu 12.04 LTS on a machine on my private network. I have bind9 installed (v9.8.1-P1) via aptitude, so it appears to have put all the bits in the right places and the service starts automatically. I plan on adding some zones later, but first I'm just trying to get it working as a caching resolver. I installed bind, configured it, and starting using it. Initially I thought it was working ok, but then I found some sites weren't being resolved. I've pinned it down to being linked to the size of the result and bind failing-over to TCP mode. So: I'm trying to find out why bind is failing when I query for domain info and the result is 512 bytes (causing a truncation and retry on TCP). Specifically it fails with ID mismatches if I point dig at localhost, but works when I query the machine's own IP (192.168.0.2). This appears to be backwards to the problem that most people have when using bind (fails on external ip, works on localhost). If I do dig @localhost google.com (which has a response of <512 bytes) then it works; I get no warnings, and plenty of output. $ dig @localhost google.com ; <<>> DiG 9.8.1-P1 <<>> @localhost google.com [snip lots of output] ;; Query time: 39 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 17 23:08:34 2013 ;; MSG SIZE rcvd: 495 If I do dig @localhost play.google.com (which has a larger response) then I get back something like: $ dig @localhost play.google.com ;; Truncated, retrying in TCP mode. ;; ERROR: ID mismatch: expected ID 3696, got 27130 This seems to be standard, documented behaviour - when the UDP response is large (here 'large' == 512 bytes) it falls back to TCP. The ID mismatch is not expected though. If I do dig @192.168.0.2 play.google.com then I still get the warning about using TCP mode, but it otherwise works $ dig @192.168.0.2 play.google.com ;; Truncated, retrying in TCP mode. ; <<>> DiG 9.8.1-P1 <<>> @192.168.0.2 play.google.com [snip most of the output] ;; Query time: 5 msec ;; SERVER: 192.168.0.2#53(192.168.0.2) ;; WHEN: Thu Oct 17 23:05:55 2013 ;; MSG SIZE rcvd: 521 At the moment I've not set up any zones in my local instance, so it's just acting as a caching resolver. My options config is pretty much unchanged from standard, I've got the following set: options { directory "/var/cache/bind"; allow-query { 192.168/16; 127.0.0.1; }; forwarders { 8.8.8.8; 8.8.4.4; }; dnssec-validation auto; edns-udp-size 4096 ; allow-transfer { any; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; And my /etc/resolv.conf is just nameserver 127.0.0.1 search .local The problem definitely seems linked to the failover to TCP mode: if I do dig +bufsize=4096 @localhost play.google.com then it works; no warning about failover to TCP, no ID mismatch, and a standard looking result. To be honest, if there was a way to force bind to use a much larger UDP buffer, that'd probably be good enough for me, but all I've been able to find mention of is max-udp-size 4096 and that doesn't change the behaviour in any way. I've also tried setting edns-udp-size 512 in case the problem is some weird EDNS issue with my router (which seems unlikely since the +bufsize=4096 flag works fine). I've also tried dig +trace @localhost play.google.com; this works. No truncation/TCP warning, and a full result. I've also tried changing the servers used in the forwarder (e.g. to OpenDNS), but that makes no difference. There's one last data point: if I repetitively do dig @localhost play.google.com I don't always get an ID mismatch, but sometimes a REFUSED error. I'm much more likely to get a REFUSED error if I dig the non-localhost IP (192.168.0.2) first: $ dig @localhost play.google.com ;; Truncated, retrying in TCP mode. ; <<>> DiG 9.8.1-P1 <<>> @localhost play.google.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 35104 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;play.google.com. IN A ;; Query time: 4 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 17 23:20:13 2013 ;; MSG SIZE rcvd: 33 Any insights or things to try would be much appreciated.

  Read the article

• Cyrus on CentOS with sasl / pam / ldap

  - by Oscar

  SASL/PAM/LDAP is driving me crazy... that's what I read a lot when googling for problems in this area, and what I experience myself :-S I'm trying to get Cyrus imap working for virtual hosting on CentOS with this authorisation backend and really don't know what's happening. In saslauthd I configured the LDAP search filter to use, but it looks like pam completely ignores it. Here's what I do for testing (done more tests but all with similar results): [root@testserv ~]# imtest -u [email protected] -a [email protected] WARNING: no hostname supplied, assuming localhost S: * OK [CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS] testserv. Cyrus IMAP4 v2.3.7-Invoca-RPM-2.3.7-7.el5_6.4 server ready C: C01 CAPABILITY S: * CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS ACL RIGHTS=kxte QUOTA MAILBOX-REFERRALS NAMESPACE UIDPLUS NO_ATOMIC_RENAME UNSELECT CHILDREN MULTIAPPEND BINARY SORT SORT=MODSEQ THREAD=ORDEREDSUBJECT THREAD=REFERENCES ANNOTATEMORE CATENATE CONDSTORE IDLE LISTEXT LIST-SUBSCRIBED X-NETSCAPE URLAUTH S: C01 OK Completed Please enter your password: C: L01 LOGIN [email protected] {6} S: + go ahead C: <omitted> S: L01 NO Login failed: authentication failure Authentication failed. generic failure Security strength factor: 0 C: Q01 LOGOUT * BYE LOGOUT received Q01 OK Completed Connection closed. The LDAP entry does exist (and so does the mailbox in Cyrus): [root@testserv ~]# ldapsearch -WxD cn=Manager,o=mydomain,c=com [email protected] Enter LDAP Password: # extended LDIF # # LDAPv3 # base <> with scope subtree # filter: [email protected] # requesting: ALL # # myuser, accounts, testserv.mydomain.com, mydomain, com dn: uid=myuser,ou=accounts,dc=testserv.mydomain.com,o=mydomain,c=com objectClass: top objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson objectClass: posixAccount objectClass: shadowAccount uidNumber: 16 uid: myuser gidNumber: 5 givenName: My sn: Name mail: [email protected] cn: My Name userPassword:: dYN5ebB0fXhNRn1pZllhRnJX7Uk= shadowLastChange: 15176 homeDirectory: /dev/null # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 This is what I get in /var/log/messages Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] ... /var/adm/auth.log Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:11 testserv cyrus/imap[12514]: _sasl_plugin_load failed on sasl_auxprop_plug_init for plugin: ldapdb Aug 2 04:00:19 testserv saslauthd[5926]: DEBUG: auth_pam: pam_authenticate failed: User not known to the underlying authentication module Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] (AFAIK I can ignore the auxprop msg) ... and /var/log/slapd.log: Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 ACCEPT from IP=127.0.0.1:51403 (IP=0.0.0.0:389) Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 BIND dn="" method=128 Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 RESULT tag=97 err=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SRCH base="o=mydomain,c=com" scope=2 deref=0 filter="([email protected])" Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SEARCH RESULT tag=101 err=0 nentries=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=2 UNBIND Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 closed These are the settings in In /etc/imapd.conf: sasl_mech_list: PLAIN LOGIN sasl_pwcheck_method: saslauthd ## sasl_auxprop_plugin: sasldb sasl_auto_transition: no and my sasl config: [root@testserv ~]# cat /etc/sysconfig/saslauthd # Directory in which to place saslauthd's listening socket, pid file, and so # on. This directory must already exist. SOCKETDIR=/var/run/saslauthd # Mechanism to use when checking passwords. Run "saslauthd -v" to get a list # of which mechanism your installation was compiled with the ablity to use. MECH=pam # Additional flags to pass to saslauthd on the command line. See saslauthd(8) # for the list of accepted flags. FLAGS="-c -r -O /etc/saslauthd.conf" [root@testserv ~]# cat /etc/saslauthd.conf ldap_servers: ldap://127.0.0.1/ ldap_search_base: dc=%d,o=mydomain,c=com ldap_auth_method: bind #ldap_filter: (|(uid=%u)((&(mail=%u@%d)(accountStatus=active))) ldap_filter: (&(mail=%u@%d)(accountStatus=active)) ldap_debug: 1 ldap_version: 3 The accountStatus=active is not in ldap yet, but that doesn't make a difference since I don't see it in the filter... that's not the reason for the failure. The weird thing is, I do get an error when I rename or remove /etc/saslauthd.conf, but when the file exists it seems happily ignored... The filter in slapd.log seems to be taken from /etc/ldap.conf. Apart from some timers, that only contains: host 127.0.0.1 base o=mydomain,c=com pam_login_attribute mail Outcommenting the pam_login_attribute results in this filter in slapd.log: filter="([email protected])" Pam-imap looks like this: [root@testserv ~]# cat /etc/pam.d/imap auth required pam_ldap.so debug account required pam_ldap.so debug #auth sufficient pam_unix.so likeauth nullok #auth sufficient pam_ldap.so use_first_pass #auth required pam_deny.so #account sufficient pam_unix.so #account sufficient pam_ldap.so The outcommented stuff is because I don't have the cyrus admin user in Ldap; that's a Linux user. That works fine when uncommented, but I still need to play around with that a little and first I wanna get imap working. Finally nsswitch: [root@testserv ~]# cat /etc/nsswitch.conf # # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: compat ldap group: compat ldap shadow: compat ldap hosts: files dns bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: nisplus publickey: nisplus automount: files nisplus aliases: files nisplus Any info where to start looking will be greatly appreciated! Thnx in advance

  Read the article

• Create an Alias Directory inside a Virtual Host

  - by Praveen Kumar

  First, let me say, I asked this question in StackOverflow, and thought I could get more replies here. I checked here, here, here, here, here, and here before asking this question. I guess my search skills are weak. I am using the WampServer version 2.2e. I have a need like, I need a virtual path inside a virtual host. Let me say the two hosts that I have. Primary Virtual Host (Localhost) NameVirtualHost *:80 <VirtualHost *:80> ServerName localhost DocumentRoot "C:/Wamp/www" </VirtualHost> My Apps Virtual Hosts <VirtualHost *:80> ServerName apps.ptrl DocumentRoot "C:/Wamp/vhosts/ptrl/apps" ErrorLog "logs/apps-ptrl-error.log" CustomLog "logs/apps-ptrl-access.log" common <Directory "C:/Wamp/vhosts/ptrl/apps"> allow from all order allow,deny AllowOverride All </Directory> DirectoryIndex index.html index.htm index.php </VirtualHost> My Blog Virtual Host <VirtualHost *:80> ServerName blog.praveen-kumar.ptrl DocumentRoot "C:/Wamp/vhosts/ptrl/praveen-kumar/blog" ErrorLog "logs/praveen-kumar-ptrl-error.log" CustomLog "logs/praveen-kumar-ptrl-access.log" common <Directory "C:/Wamp/vhosts/ptrl/praveen-kumar/blog"> allow from all order allow,deny AllowOverride All </Directory> DirectoryIndex index.html index.htm index.php </VirtualHost> My requirement now is to have http://apps.ptrl/blog/ and http://blog.praveen-kumar.ptrl/ should be the same directory. One thing I thought of is, moving the blog folder inside the apps folder, but it is connected with Git and other stuffs are there, so it is not possible to move the folder. So, I thought of creating an alias to the VirtualHost in this way: <VirtualHost *:80> ServerName apps.ptrl DocumentRoot "C:/Wamp/vhosts/ptrl/apps" ErrorLog "logs/apps-ptrl-error.log" CustomLog "logs/apps-ptrl-access.log" common <Directory "C:/Wamp/vhosts/ptrl/apps"> allow from all order allow,deny AllowOverride All </Directory> DirectoryIndex index.html index.htm index.php # The alias to the blog! Alias /blog "C:/Wamp/vhosts/ptrl/praveen-kumar/blog" <Directory "C:/Wamp/vhosts/ptrl/praveen-kumar/blog"> allow from all order allow,deny AllowOverride All </Directory> </VirtualHost> But when I tried to access http://apps.ptrl/blog, I am getting an Error 403 Forbidden page. Am I doing the right thing? If you need to look at the access log, and error log, they are here: # Access Log 127.0.0.1 - - [14/Oct/2012:09:53:11 +0530] "GET /blog HTTP/1.1" 403 206 127.0.0.1 - - [14/Oct/2012:09:53:11 +0530] "GET /favicon.ico HTTP/1.1" 404 209 127.0.0.1 - - [14/Oct/2012:09:53:53 +0530] "GET / HTTP/1.1" 200 6935 127.0.0.1 - - [14/Oct/2012:09:53:53 +0530] "GET /app/blog/thumb.png HTTP/1.1" 404 216 # Error Log [Sun Oct 14 09:53:11 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/Wamp/vhosts/ptrl/praveen-kumar/blog [Sun Oct 14 09:53:11 2012] [error] [client 127.0.0.1] File does not exist: C:/Wamp/vhosts/ptrl/apps/favicon.ico [Sun Oct 14 09:53:53 2012] [error] [client 127.0.0.1] File does not exist: C:/Wamp/vhosts/ptrl/apps/app/blog, referer: http://apps.ptrl/ Waiting eagerly for some help. I am ready to provide more info, if needed. Update #1: Changed VirtualHosts: <VirtualHost *:80> ServerName apps.ptrl DocumentRoot "C:/Wamp/vhosts/ptrl/apps" ErrorLog "logs/apps-ptrl-error.log" CustomLog "logs/apps-ptrl-access.log" common # The alias to the blog! Alias /blog "C:/Wamp/vhosts/ptrl/praveen-kumar/blog" <Directory "C:/Wamp/vhosts/ptrl/praveen-kumar/blog"> allow from all order allow,deny AllowOverride All </Directory> <Directory "C:/Wamp/vhosts/ptrl/apps"> allow from all order allow,deny AllowOverride All </Directory> DirectoryIndex index.html index.htm index.php </VirtualHost> The issue now: I am able to access the site. The physical links are working now. i.e., I am able to open http://apps.ptrl/blog/index.php but not http://apps.ptrl/blog/view-1.ptf, which gets translated to http://apps.ptrl/blog/index.php?page=view&id=1. Any solutions?

  Read the article

• Postfix configuration - Uing virtual min but server is bouncing back my mail.

  - by brodiebrodie

  I have no experience in setting up postfix, and thought virtualmin minght do the legwork for me. Appears not. When I try to send mail to the domain (either [email protected] [email protected] or [email protected]) I get the following message returned This is the mail system at host dedq239.localdomain. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to <postmaster> If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]> (expanded from <[email protected]>): User unknown in virtual alias table Final-Recipient: rfc822; [email protected] Original-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 Diagnostic-Code: X-Postfix; User unknown in virtual alias table How can I diagnose the problem here? It seems that the mail gets to my server but the server fails to locally deliver the message to the correct user. (This is a guess, truthfully I have no idea what is happening). I have checked my virtual alias table and it seems to be set up correctly (I can post if this would be helpful). Can anyone give me a clue as to the next step? Thanks alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no local_recipient_maps = $virtual_mailbox_maps mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination smtpd_sasl_auth_enable = yes soft_bounce = no unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/virtual My mail log file (the last entry) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 207C6B18158: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: from=<[email protected]>, size=1805, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/error[7238]: 207C6B18158: to=<[email protected]>, orig_to=<[email protected]>, relay=none, delay=0.64, delays=0.61/0.01/0/0.02, dsn=5.0.0, status=bounced (User unknown in virtual alias table) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 8DC13B18169: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 8DC13B18169: from=<>, size=3691, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/bounce[7239]: 207C6B18158: sender non-delivery notification: 8DC13B18169 Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: removed Sep 30 15:13:48 dedq239 postfix/smtp[7240]: 8DC13B18169: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.216.55]:25, delay=1.3, delays=0.02/0.01/0.58/0.75, dsn=2.0.0, status=sent (250 2.0.0 OK 1254348828 36si15082901pxi.91) Sep 30 15:13:48 dedq239 postfix/qmgr[7177]: 8DC13B18169: removed Sep 30 15:14:17 dedq239 postfix/smtpd[7233]: disconnect from mail-bw0-f228.google.com[209.85.218.228] etc.aliases file below I have not touched this file - myvirtualdomain is a replacement for my real domain name # Aliases in this file will NOT be expanded in the header from # Mail, but WILL be visible over networks or from /bin/mail. # # >>>>>>>>>> The program "newaliases" must be run after # >> NOTE >> this file is updated for any changes to # >>>>>>>>>> show through to sendmail. # # Basic system aliases -- these MUST be present. mailer-daemon: postmaster postmaster: root # General redirections for pseudo accounts. bin: root daemon: root adm: root lp: root sync: root shutdown: root halt: root mail: root news: root uucp: root operator: root games: root gopher: root ftp: root nobody: root radiusd: root nut: root dbus: root vcsa: root canna: root wnn: root rpm: root nscd: root pcap: root apache: root webalizer: root dovecot: root fax: root quagga: root radvd: root pvm: root amanda: root privoxy: root ident: root named: root xfs: root gdm: root mailnull: root postgres: root sshd: root smmsp: root postfix: root netdump: root ldap: root squid: root ntp: root mysql: root desktop: root rpcuser: root rpc: root nfsnobody: root ingres: root system: root toor: root manager: root dumper: root abuse: root newsadm: news newsadmin: news usenet: news ftpadm: ftp ftpadmin: ftp ftp-adm: ftp ftp-admin: ftp www: webmaster webmaster: root noc: root security: root hostmaster: root info: postmaster marketing: postmaster sales: postmaster support: postmaster # trap decode to catch security attacks decode: root # Person who should get root's mail #root: marc abuse-myvirtualdomain.com: [email protected] My etc/postfix/virtual file is below - again myvirtualdomain is a replacement. I think this file was generated by Virtualmin and I have tried messing around with is with no success... This is the version without my changes. myunixusername@myvirtualdomain .com myunixusername myvirtualdomain .com myvirtualdomain.com [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

  Read the article

• Understanding Windows 8 Recovery options

  - by stuffe

  Background: I am preparing a PC that I am sending to a relative abroad, who has little or no internet access, and next to no sensible options for getting IT support should anything go wrong. As such I am trying to provide a full set of recovery options such that they are able to reinstall the OS with minimum fuss or assistance if required. The PC is a brand new Acer laptop that came with Windows 7 pre-installed (and an associated recovery partition) and a free upgrade to Windows 8. I have installed Windows 8 from scratch performing a format and clean install from media I burned from the official download. The existing Windows 7 recovery partition is still there, and I can still boot from it. I have created recovery DVDs of that in case it is ever lost. Here are my recovery options so far. I can perform a factory reset of Win 7 via the recovery partition I can perform a factory reset of Win 7 via burned recovery DVDs I can re-install Windows 8 cleanly from a DVD All of these are useful, but not what I want, because the first 2 methods use Win 7, and still fill the machine with crapware, and the latter doesn't provide for any post-install customisation and software installation. So, I am looking to see what other options are available to perform a Windows 8 recovery that will be more than a simple install. I am aware that Win8 comes with some useful refresh tools: Refresh your PC - Re-install Win 8 over the top of your existing installation, recovering from any Windows corruption etc. I can run this from my current install, although it says some files are missing that will be provided by me install or recovery media, which seems to be code for stick your install DVD in, and it starts after I do that - unfortunately for this particular laptop you need to specify a particular WIFI driver or the install bombs out part way through with IRQL errors, and this refresh method skips the part where you can load a driver, so it's no use to me. I think I can fix this by creating a custom recovery image using the recimg.exe command but it takes hours to complete so I haven't tried it yet. Reset your PC - Perform a full install and lose all your files. Again it needs my Install media inserting before it will do anything, but then it provides an error (will include later when I recreate it...) Now, these recovery options look useful (in principal, although both are fail for me) but they rely on having a working system to access the tools, which leads me to the last option, of making a Recovery USB drive. I have made a recovery drive, and it should perform loads of useful things, including copying my WIN7 recovery partition to the drive, providing the above refresh and reset options, providing other troubleshooting options and also the ability to restore from a custom image, only none of them seem to work for me. Creating the Recovery Drive - the option to include my recovery partition is greyed out. The partition exists and works fine, why will it not copy it? Refresh - I imagine this would have the same issues as I described before, but this is moot because when I try it says that the "drive where Windows is installed is locked, please unlock the drive and try again" with no info on what that means and how to do it. Restore - Again, probably pointless as I can just use the DVD, but it also errors: "unable to reset your PC. A required drive partition is missing" System Restore - should let me roll back a bad driver etc as per normal in Windows, only it simply says "To use system restore you must specify which windows installation to restore. Restart this computer, select an operating system, and select system restore" ?!?! System Image Recovery - this seems to be offering to restore from a Windows system image, but this is deprecated in Windows 8, although you can still make one if you use the Windows 7 Backup tools, however the resultant file is too large to put on the USB stick as it's FAT formatted, and would be a massive stack of DVDs anyway. So useless. It would be nice it it would work with the custom recovery image you can use with the refresh command, but there seems no option to do this. Automatic Repair - some diagnostics, which seem useless as it happily tells me it can't fix my problem, even though I have none. Command Prompt - yay, this works! What on earth do I want to use it for... Had any of the above worked, it might be useful, but as any form of install still requires you to have the DVD, and any form of custom recovery image also requires you to have either a massive stack of DVDs or an NTFS formatted backup device in addition to the recovery drive, it sort of ruins the point. It doesn't seem rocket science. I want to create a bootable USB drive that I can refresh Windows over an existing install with, perform a clean reinstall to a bare system, or recovery a customised image with existing apps installed. If anyone can point me in a direction that allows me to make a single recovery drive do these all these things, I would appreciate it. I have a 32Gb USB3 thumb drive that I bought for this very purpose, but it's seems to be fighting to let me do anything useful. At this rate I will be making a DriveImageXML recovery stick and dumping the OS with that, which I know works, but isn't so elegant as using the proper tools..

  Read the article

• iptables to allow 80 and 443 on chillispot running ddwrt

  - by user76682

  I am having problems setting this up. this is what I am trying to do. I have Chillispot (hotpsot) running on dd-wrt. Everything is setup, but the client wants only 80 and 443 to go through through the hotspot. I found this tutorial for dd-wrt but that doesnt seem to work. http://www.dd-wrt.com/wiki/index.php/Iptables#Allow_HTTP_traffic_only_to_specific_domain.28s.29 Initially I tried to place the options at the top but didnt work. then i flushed the iptables and set only these three. I can see the pkts number grow but for some reason I can browse. root@DD-WRT:~# iptables -nvL FORWARD Chain FORWARD (policy ACCEPT 3105 packets, 2442K bytes) pkts bytes target prot opt in out source destination 1629 230K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 21,80,443 2346 2792K ACCEPT 0 -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 328 46420 DROP 0 -- * * 0.0.0.0/0 0.0.0.0/0 Heres some info from the router, chillispot is the tun0 interface. root@DD-WRT:~# iptables -vnL FORWARD --line-numbers Chain FORWARD (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 ACCEPT 47 -- * vlan1 192.168.8.0/24 0.0.0.0/0 2 0 0 ACCEPT tcp -- * vlan1 192.168.8.0/24 0.0.0.0/0 tcp dpt:1723 3 32 1851 ACCEPT 0 -- tun0 * 0.0.0.0/0 0.0.0.0/0 state NEW 4 0 0 ACCEPT 0 -- br0 br0 0.0.0.0/0 0.0.0.0/0 5 48 2408 TCPMSS tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU 6 756 452K lan2wan 0 -- * * 0.0.0.0/0 0.0.0.0/0 7 756 452K ACCEPT 0 -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 8 0 0 TRIGGER 0 -- vlan1 br0 0.0.0.0/0 0.0.0.0/0 TRIGGER type:in match:0 relate:0 9 0 0 trigger_out 0 -- br0 * 0.0.0.0/0 0.0.0.0/0 10 0 0 ACCEPT 0 -- br0 * 0.0.0.0/0 0.0.0.0/0 state NEW 11 0 0 DROP 0 -- * * 0.0.0.0/0 0.0.0.0/0 12 0 0 DROP 0 -- br0 * 0.0.0.0/0 0.0.0.0/0 13 0 0 DROP 0 -- * br0 0.0.0.0/0 0.0.0.0/0 The interfaces: root@DD-WRT:~# ifconfig -a br0 Link encap:Ethernet HWaddr 00:12:17:CF:80:5F inet addr:192.168.8.1 Bcast:192.168.8.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2371 errors:0 dropped:0 overruns:0 frame:0 TX packets:1862 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:259721 (253.6 KiB) TX bytes:254862 (248.8 KiB) br0:0 Link encap:Ethernet HWaddr 00:12:17:CF:80:5F inet addr:169.254.255.1 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:12:17:CF:80:5F UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:2508 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1066410 (1.0 MiB) TX bytes:376001 (367.1 KiB) Interrupt:5 eth1 Link encap:Ethernet HWaddr 00:12:17:CF:80:61 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:729 errors:0 dropped:0 overruns:0 frame:114693 TX packets:697 errors:2 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107869 (105.3 KiB) TX bytes:473134 (462.0 KiB) Interrupt:4 Base address:0x1000 etherip0 Link encap:Ethernet HWaddr 1E:13:B7:09:CC:8C BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1 RX packets:18 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1210 (1.1 KiB) TX bytes:1210 (1.1 KiB) teql0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.182.1 P-t-P:192.168.182.1 Mask:255.255.255.0 UP POINTOPOINT RUNNING MTU:1500 Metric:1 RX packets:662 errors:0 dropped:0 overruns:0 frame:0 TX packets:587 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 RX bytes:92167 (90.0 KiB) TX bytes:427657 (417.6 KiB) vlan0 Link encap:Ethernet HWaddr 00:12:17:CF:80:5F UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2371 errors:0 dropped:0 overruns:0 frame:0 TX packets:1864 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:269558 (263.2 KiB) TX bytes:262680 (256.5 KiB) vlan1 Link encap:Ethernet HWaddr 00:12:17:CF:80:60 inet addr:10.3.2.47 Bcast:10.255.255.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2675 errors:0 dropped:0 overruns:0 frame:0 TX packets:645 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:705429 (688.8 KiB) TX bytes:102197 (99.8 KiB) The routing table: root@DD-WRT:~# netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.182.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0 10.3.2.0 0.0.0.0 255.255.255.0 U 0 0 0 vlan1 192.168.8.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 10.3.2.1 0.0.0.0 UG 0 0 0 vlan1 Highly appreciate your help. TIA, Arun

  Read the article

• Email sent from server with rDNS & SPF being blocked by Hotmail

  - by Canadaka

  I have been unable to send email to users on hotmail or other Microsoft email servers for some time. Its been a major headache trying to find out why and how to fix the issue. The emails being sent that are blocked from my domain canadaka.net. I use Google Aps to host my regular email serverice for my @canadaka.net email addresses. I can sent email from my desktop or gmail to a hotmail without any problem. But any email sent from my server on behalf of canadaka.net is blocked, not even arriving in the junk email. The IP that the emails are being sent from is the same IP that my site is hosted on: 66.199.162.177 This IP is new to me since August 2010, I had a different IP for the previous 3-4 years. This IP is not on any credible spam lists http://www.anti-abuse.org/multi-rbl-check-results/?host=66.199.162.177 The one list spamcannibal.org my IP is listed on seems to be out of my control, says "no reverse DNS, MX host should have rDNS - RFC1912 2.1". But since I use Google for my email hosting, I don't have control over setting up RDNS for all the MX records. I do have Reverse DNS setup for my IP though, it resolves to "mail.canadaka.net". I have signed up for SNDS and was approved. My ip says "All of the specified IPs have normal status." Sender Score: 100 https://www.senderscore.org/lookup.php?lookup=66.199.162.177&ipLookup.x=55&ipLookup.y=14 My Mcafee threat level seems fine I have a TXT SPF record setup, I am currently using xname.org as my DNS, and they don't have a field for SPF, but their FAQ says to add the SPF info as a TXT entry. v=spf1 a include:_spf.google.com ~all Some "SPF checking" tools ive used detect that my domain has a valid SPF, but others don't. Like Microsoft's SPF wizard, i think this is because its specifically looking for an SPF record and not in the TXT. "No SPF Record Found. A and MX Records Available". From my home I can run "nslookup -type=TXT canadaka.net" and it returns: Server: google-public-dns-a.google.com Address: 8.8.8.8 Non-authoritative answer: canadaka.net text = "v=spf1 a include:_spf.google.com ~all" One strange thing I found is i'm unable to ping hotmail.com or msn.com or do a "telnet mail.hotmail.com 25". I am able to ping gmail.com and many other domains I tried. I tried changing my DNS servers to Google's Public DNS and did a ipconfig /flushdns but that had no effect. I am however able to connect with telnet to mx1.hotmail.com This is what the email headers look like when I send to a Google email server and I receive the email with no troubles. You can see that SPF is passing. Delivered-To: [email protected] Received: by 10.146.168.12 with SMTP id q12cs91243yae; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Received: by 10.43.48.7 with SMTP id uu7mr4292541icb.68.1298858509242; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Return-Path: Received: from canadaka.net ([66.199.162.177]) by mx.google.com with ESMTP id uh9si8493137icb.127.2011.02.27.18.01.45; Sun, 27 Feb 2011 18:01:48 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) client-ip=66.199.162.177; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) [email protected] Message-Id: <[email protected] Received: from coruscant ([127.0.0.1]:12907) by canadaka.net with [XMail 1.27 ESMTP Server] id for from ; Sun, 27 Feb 2011 18:01:29 -0800 Date: Sun, 27 Feb 2011 18:01:29 -0800 Subject: Test To: [email protected] From: XXXX Reply-To: [email protected] X-Mailer: PHP/5.2.13 I can send to gmail and other email services fine. I don't know what i'm doing wrong! UPDATE 1 I have been removed from hotmails IP block and am now able to send emails to hotmail, but they are all going directly to the JUNK folder. UPDATE 2 I used Telnet to send a test message to port25.com, seems my SPF is not being detected. Result: neutral (SPF-Result: None) canadaka.net. SPF (no records) canadaka.net. TXT (no records) I do have a TXT record, its been there for years, I did change it a week ago. Other sites that allow you to check your SPF detect it, but some others like Microsofts Wizard doesn't. This iw what my SPF record in my xname.org DNS file looks like: canadaka.net. 86400 IN TXT "v=spf1 a include:_spf.google.com ~all" I did have a nameserver as my 4th option that doens't have the TXT records since it doens't support it. So I removed it from the list and instead added wtfdns.com as my 4th adn 5th nameservers, which does support TXT.

  Read the article

• Secondary DHCP server won't start on Centos 6.2

  - by Slowjoe

  I'm trying to create a backup DHCP server. Server times are in sync. Primary server starts fine. Secondary server won't start. Error from /var/log/messages is: Sep 15 14:47:45 stream dhcpd: Copyright 2004-2010 Internet Systems Consortium. Sep 15 14:47:45 stream dhcpd: All rights reserved. Sep 15 14:47:45 stream dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 25: invalid statement in peer declaration Sep 15 14:47:45 stream dhcpd: #011max-response-default Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 41: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 49: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in. Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 70: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 78: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: Configuration file errors encountered -- exiting Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: This version of ISC DHCP is based on the release available Sep 15 14:47:45 stream dhcpd: on ftp.isc.org. Features have been added and other changes Sep 15 14:47:45 stream dhcpd: have been made to the base software release in order to make Sep 15 14:47:45 stream dhcpd: it work better with this distribution. Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: Please report for this software via the CentOS Bugs Database: Sep 15 14:47:45 stream dhcpd: http://bugs.centos.org/ Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: exiting. Config file contents: # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "eng.foo.com"; option domain-name-servers ns0.eng.foo.com, ns1.eng.foo.com; option ntp-servers ntp.eng.foo.com; #option time-servers ntp.eng.foo.com; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; failover peer "dhcp-failover" { secondary; address 10.0.1.70; port 647; peer address 10.0.1.11; peer port 647; max-response-default 30; max-unacked-updates 10; load balance max seconds 3; } # # Management subnet # subnet 10.0.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; option routers 10.0.0.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.0.240 10.0.0.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.0.150 10.0.0.199; deny unknown-clients; } include "/etc/dhcp/dhcpd.conf-engmgmt"; } # # Data subnet # subnet 10.0.1.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.1.255; option routers 10.0.1.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.1.240 10.0.1.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.1.150 10.0.1.199; deny unknown-clients; } # For centos network installs if substring (option vendor-class-identifier, 0, 8) = "anaconda" { filename "/autohome/distro/ks/"; next-server eng-data.eng.foo.com; } # For PXE network installs if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } # For KVM PXE network installs if substring (option vendor-class-identifier, 0, 9) = "Etherboot" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } include "/etc/dhcp/dhcpd.conf-engdata"; }

  Read the article

• postfix 5.7.1 Relay access denied when sending mail with cron

  - by zensys

  Reluctant to ask because there is so much here about 'postfix relay access denied' but I cannot find my case: I use php (Zend Framework) to send emails outside my network using the Google mail server because I could not send mail outside my server (user: web). However when I sent out an email via cron (user: root, I believe), still using ZF, using the same mail config/credentials, I get the message: '5.7.1 Relay access denied' I guess I need to know one of two things: 1. How can I use the google smtp server from cron 2. What do I need to change in my config to send mail using my own server instead of google Though the answer to 2. is the more structural solution I assume, I am quite happy with an answer to 1. as well because I think Google is better at server maintaince (security/spam) than I am. Below my ZF application.ini mail section, main.cf and master.cf: application.ini: resources.mail.transport.type = smtp resources.mail.transport.auth = login resources.mail.transport.host = "smtp.gmail.com" resources.mail.transport.ssl = tls resources.mail.transport.port = 587 resources.mail.transport.username = [email protected] resources.mail.transport.password = xxxxxxx resources.mail.defaultFrom.email = [email protected] resources.mail.defaultFrom.name = "my company" main.cf: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mail.second-start.nl mydomain = second-start.nl alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes # see under Spam smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps virtual_transport = dovecot dovecot_destination_recipient_limit = 1 # Spam disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, check_helo_access hash:/etc/postfix/helo_access, reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination, reject_invalid_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, permit_mynetworks, reject_non_fqdn_hostname, reject_rbl_client sbl.spamhaus.org, reject_rbl_client zen.spamhaus.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.spamcop.net, permit smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 master.cf: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient}

  Read the article

• RAID1 rebuild fails due to disk errors

  - by overlord_tm

  Quick info: Dell R410 with 2x500GB drives in RAID1 on H700 Adapter Recently one of drives in RAID1 array on server failed, lets call it Drive 0. RAID controller marked it as fault and put it offline. I replaced faulty disk with new one (same series and manufacturer, just bigger) and configured new disk as hot spare. Rebuild from Drive1 started immediately and after 1.5 hour I got message that Drive 1 failed. Server was unresponsive (kernel panic) and required reboot. Given that half hour before this error rebuild was at about 40%, I estimated that new drive is not in sync yet and tried to reboot just with Drive 1. RAID controller complained a bit about missing RAID arrays, but it found foreign RAID array on Drive 1 and I imported it. Server booted and it runs (from degraded RAID). Here is SMART data for disks. Drive 0 (the one that failed first) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 142 021 - 3866 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10432 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 112 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 198 000 - 3 And Drive 1 (the drive which was reported healthy from controller until rebuild was attempted) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 35 3 Spin_Up_Time POS--K 143 143 021 - 3841 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10455 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 114 105 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 3 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 In extended error logs from SMART I found: Drive 0 has only one error Error 1 [0] occurred at disk power-on lifetime: 10282 hours (428 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 18 00 00 00 6a 24 20 40 00 Error: IDNF at LBA = 0x006a2420 = 6956064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 60 00 f8 00 00 00 6a 24 20 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 18 00 60 00 00 00 6a 24 00 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 80 00 58 00 00 00 6a 23 80 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 68 00 50 00 00 00 6a 23 18 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 10 00 10 00 00 00 6a 23 00 40 00 17d+20:25:18.104 WRITE FPDMA QUEUED But Drive 1 has 883 errors. I see only few last ones and all errors I can see look like this: Error 883 [18] occurred at disk power-on lifetime: 10454 hours (435 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 00 80 00 00 39 97 19 c2 40 00 Error: AMNF at LBA = 0x399719c2 = 966203842 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:57.802 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:57.779 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:55.704 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:55.681 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:53.606 READ FPDMA QUEUED Given those errors, is there any way I can rebuild RAID back, or should I make backup, shutdown server, replace disks with new ones and restore it? What about if I dd faulty disk to new one from linux running on USB/CD? Also, if anyone have more experiences, what could be causes for those errors? Crappy controller or disks? Disks are about 1 year old, but it is pretty unbelievable to me that both would die within so short timespan.

  Read the article

• Trouble recovering MySQL InnoDB database after server crash

  - by Andy Shinn

  I had a server crash due to a broken iSCSI link (the filesystem went into read-only mode). After repairing the link and rebooting the machine (CentOS 5 / MySQL 5.1), the MySQL server would not start and gave the following error: 100603 19:11:46 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100603 19:11:46 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... InnoDB: Warning: database page corruption or a failed InnoDB: file read of page 112541. InnoDB: Trying to recover it from the doublewrite buffer. InnoDB: Dump of the page: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): lots of binary data 100603 19:11:46 InnoDB: Page checksum 953720272, prior-to-4.0.14-form checksum 2641912043 InnoDB: stored checksum 617821918, prior-to-4.0.14-form stored checksum 2080617765 InnoDB: Page lsn 115 2632899642, low 4 bytes of lsn at page end 2641594600 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Dump of corresponding page in doublewrite buffer: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): more binary data 100603 19:11:46 InnoDB: Page checksum 908374788, prior-to-4.0.14-form checksum 824841363 InnoDB: stored checksum 912869634, prior-to-4.0.14-form stored checksum 2210927931 InnoDB: Page lsn 115 2635312169, low 4 bytes of lsn at page end 2633173354 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Also the page in the doublewrite buffer is corrupt. InnoDB: Cannot continue operation. InnoDB: You can try to recover the database with the my.cnf InnoDB: option: InnoDB: innodb_force_recovery=6 100603 19:11:46 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended Per the error message, I have tried setting set-variable=innodb_force_recovery=6 in the my.cnf to get to the data. This allows the MySQL server to start. But when I try to do a mysqldump of the database or a SELECT * INTO OUTFILE "filename" FROM broken_table; it seems to endlessly just export the same line over and over again. I have also tried http://code.google.com/p/innodb-tools/. But this tool fails with an error that 'blob' type is not supported. If I try to access the data using the PHP application it crashes MySQL: `100603 19:19:19 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=2 max_threads=151 threads_connected=2 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338317 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x15d33f0 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x453aff00 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x24) [0x874364] /usr/libexec/mysqld(handle_segfault+0x346) [0x5c9166] /lib64/libpthread.so.0 [0x3a6e40eb10] /usr/libexec/mysqld(rec_get_offsets_func+0x30) [0x7cc310] /usr/libexec/mysqld [0x7674d8] /usr/libexec/mysqld(btr_search_info_update_slow+0x638) [0x768d48] /usr/libexec/mysqld(btr_cur_search_to_nth_level+0xc7d) [0x75f86d] /usr/libexec/mysqld [0x7dd1c1] /usr/libexec/mysqld(row_search_for_mysql+0x18b0) [0x7e03d0] /usr/libexec/mysqld(ha_innobase::general_fetch(unsigned char*, unsigned int, unsigned int)+0x7c) [0x7526fc] /usr/libexec/mysqld(handler::read_multi_range_next(st_key_multi_range**)+0x29) [0x6aed09] /usr/libexec/mysqld(QUICK_RANGE_SELECT::get_next()+0x194) [0x69a964] /usr/libexec/mysqld [0x6aafe9] /usr/libexec/mysqld(sub_select(JOIN*, st_join_table*, bool)+0x56) [0x635196] /usr/libexec/mysqld [0x63f9cd] /usr/libexec/mysqld(JOIN::exec()+0x950) [0x6497c0] /usr/libexec/mysqld(mysql_select(THD*, Item*, TABLE_LIST*, unsigned int, List&, Item*, unsigned int, st_order*, st_order*, Item*, st_order*, unsign ed long long, select_result*, st_select_lex_unit*, st_select_lex*)+0x17b) [0x64b34b] /usr/libexec/mysqld(handle_select(THD*, st_lex*, select_result*, unsigned long)+0x169) [0x64bc79] /usr/libexec/mysqld [0x5d34b6] /usr/libexec/mysqld(mysql_execute_command(THD*)+0x4e5) [0x5d6b45] /usr/libexec/mysqld(mysql_parse(THD*, char const*, unsigned int, char const)+0x211) [0x5dc321] /usr/libexec/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x10b8) [0x5dd3f8] /usr/libexec/mysqld(do_command(THD*)+0xe6) [0x5dd9e6] /usr/libexec/mysqld(handle_one_connection+0x73d) [0x5d036d] /lib64/libpthread.so.0 [0x3a6e40673d] /lib64/libc.so.6(clone+0x6d) [0x3a6d4d3d1d] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd-query at 0x15de5e0 = SELECT DISTINCT count(DISTINCT i.itemid) as rowscount,i.hostid FROM items i WHERE ((i.itemid BETWEEN 000000000000000 AND 0999999 99999999)) AND i.type<9 AND (i.hostid IN (10017,10047,10050,10054,10056,10059,10062,10063,10064,10065,10066,10067,10068,10069,10070,10071,10072,10073,100 74,10075,10076,10077,10078,10079,10080,10081,10082,10084,10088,10089,10090,10091,10092,10093,10094,10095,10096,10097,10098,10099,10100,10101,10102,10103,10 104,10105,10106,10107,10108,10109)) GROUP BY i.hostid thd-thread_id=3 thd-killed=NOT_KILLED The manual page at contains information that should help you find out what is causing the crash. 100603 19:19:19 mysqld_safe Number of processes running now: 0 100603 19:19:19 mysqld_safe mysqld restarted` Before recovering form an older backup as a last resort I am looking for anymore suggestions. Thanks!

  Read the article

• Spotlight Infinite Indexing issue (external data drive)

  - by Manca Weeks

  This is an external drive, formerly a boot drive which is now in use only to access music files (sibelius, audio, midi, live, logic etc.) without transferring the data into a new boot system, partly because of the issue I am about to describe, but mostly because the majority of the data is mainly there for archival purposes. The user is a composer and prominent musician and needs to be able to rehash the data at will. I have tried several things - here is a list: - make complete filesystem clone with antonio diaz's ddrescue - run Disk Warrior on copy, repair whatever errors occurred - wipe out all ACLs on entire drive - set all permissions to the same value - wide open 777 - remove any system data (applications, system files, including hidden files to the best of my knowledge) by selecting only non-system/app data and using Carbon Copy Cloner to put only the data of interest onto a newly formatted drive - transfer data to newly formatted drive folder by folder, resetting the spotlight index in between adding each to observe for issues (interesting here is that no issues occurred except for in Documents folder - when I transferred only the Documents folder to a newly formatted drive on its own - no trouble. It appears almost as thought it may not be the content but the quantity or specific combination of data that results in problems) - use DataRescue to transfer the data to yet another newly formatted drive to expose any missed hidden files Between each of the above steps I stopped Spotlight (search for anything beginning with md in Activity Monitor - All Processes and quitting it), deleted the .Spotlight-V100 directory from the affected drive. Restart Splotlight indexing by adding drive to Spotlight privacy list and removing it. In each case the same issue occurs - Spotlight begins indexing normally (or so it seems), then the index estimated time increases, usually to 4 hours remaining. This is where it gets stuck and continues to predict 4 hours remaining but never finishes. Sometimes I can't eject the drive and have to quit the md.. processes from Activity Monitor to be able to eject the drive without Force Eject. Once I disconnect the drive after the 4 hours remaining situation - if I reattach it, Spotlight forever estimates remaining time and never gets going again. So there it is. It is apparently not a filesystem issue, not a permissions issue and not tied to any particular piece of hardware or protocol (used USB and FW drives). I have tried this on several machines (3 to be precise) and in 10.5.8 and 10.6.5. Simply disabling Spotlight on this volume is not an option because the owner has no clue where things are as the data on the volume dates back to music projects and compositions from 2003 and before. He needs to be able to query for results. Anyone got any ideas? ---update 2-6-11 Since I have not received any responses except the one below which appears to misunderstand my point, I am updating this post hoping to get more responses. I have used the terminal command sudo opensnoop -p PID where PID is the mdworker process ID to try and determine what Spotlight is doing and hopefully find the files it's having trouble with. Here's what happens: After indexing for a few hours, mdworker is gone. It no longer shows up in Activity Monitor under "All Processes" and the Terminal window with the opensnoop result stops moving. I then proceeded to execute the same command on mds to see what it was doing and here's what I get, repeatedly: 501 57 mds 21 / 501 57 mds 21 /Volumes/Sno Leppard 501 57 mds 21 /Volumes/Tiger 501 57 mds 21 /Volumes/Leppard 501 57 mds 21 /Volumes/Disk Warrior 501 57 mds 21 /Volumes/ONM Data These represent all the volumes currently mounted in the system. All except ONM Data, which is the one I am trying to index, are excluded from SPotlight indexing at the moment. The sequence above repeats over and over, with slight variation, sometimes skipping one of the volumes. Questions - what happened to mdworker? What is mds doing? I will let this run until tomorrow morning and throughout the day and monitor for any changes. Any input would be very much appreciated. Even if you're not sure what the ultimate answer is, please alert me to anything you think I may be missing. Hopefully at some point we will figure this out... Thanks, M __final edit__ I finally resolved the issue and here is how I did it. I used the terminal command "sudo opensnoop -p PID" where the PID is the process id of the processes I was monitoring. I was looking at all instances of mds and mdworker running in the system. After the third time through indexing the same data set (see info above), I contacted Apple and got to their highest level of support - they were flabbergasted as well. They advised me to install yet another default 10.6.6 system and try again. The same pattern repeated - mds and mdworker(s) would start indexing and eventually the spotlight icon would say 6 hours remaining and all mdworkers were gone, mds at 90% or so of CPU. But I did finally figure out that the first time mdworker stopped like that, the last file it touched was always in the same folder. I excluded that folder from spotlight search and the rest of the data set indexed within about 2 hours with no strange behavior or failures. I copied that folder to another machine and Spotlight barfed immediately. Exclude that folder and all is well again. I have no clue what is causing this behavior, still, but I did find a functional solution to the problem. Anyone with a similar problem - run opensnoop on all instances of mds and mdworker and wait patiently for wdworker to exit. Look at the last file it touched and exclude the enclosing folder from being indexed. I was able to repeat the issue and solution on 2 different installs and 2 different copies of the data set. Hope this helps. If we find an actual cause of the folder being such a problem (it is called MICHAEL BRECKER RECORD SOLOS and contains almost 1 GB of audio related files - performer, live, SD2 - things like that), I will edit again to let you all know. Thanks for ay attempts to help, M

  Read the article

• puppet master REST API returns 403 when running under passenger works when master runs from command line

  - by Anadi Misra

  I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

  Read the article

< Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >