Search Results

Search found 16288 results on 652 pages for 'online apps'.

Page 529/652 | < Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >

• Using pre-made patch cables on a punch down block?

  - by Trevor Harrison

  I need to add a 24 port switch to my wiring closet. In the (distant) past, I usually just punched each port of the switch to a 110 block on the wall (using hand-made cables), and cross connect between that and the 110 block that has the runs to each workstation. To save time, I'm thinking of buying 12 pre-made drop cables, cutting them in half (so 24 single ended cables), and punching those to my 110 block. The things I'm worried about are wire type (ie. solid vs. strands) and color scheme. I really don't know if they use different wire types (still?), but I remember that being an issue at one point. Can anyone comment on this? (I definitely won't feel comfortable trying to punch stranded wiring on my 110 block) Also, picking up a random pre-built cable I had laying around, I noticed that the color scheme used didn't appear to be T568B, but T568A, which would clash with the rest of my wall. Anyone know of an online source that specifies these things? I've looked at www.cablesforless.com (which does have nicer prices) and www.cablestogo.com (which seem stupid expensive) so far. Cables For Less doesn't specify wiring scheme, Cables To Go does specify T568B. Both seem to specify stranded wires instead of solid.

  Read the article

• Does Hyper-V support SCSI Pass-through discs in a Server 2003 R2 VM?

  - by Peter Bernier

  I'm running into some difficulties getting pass-through disks to be accessible to a Hyper-v server 2003 r2 virtual machine. Host OS : Server 2008 R2 full w/Hyper-V role Guest OS : Server 2003 R2 (Windows Home Server) The guest's OS disk is a pass-through disk on the IDE controller (not the best solution, but I can live with it). My storage disks will be pass-through disks on the SCSI controller. I'm able to see all of the disks that I'll be using for the VM on the host without issue. The problem that I'm having is that I can't seem to get the guest OS to be able to 'see' the storage drives (as pass-through disks on the SCSI controller). Here's what I'm doing : On the host, the storage drive is set to 'Offline' just like the OS disk (this is required for pass-through to work). In the VM, the storage drive is on the SCSI controller. Hyper-V Integration Tools are installed in guest. That's as far as I'm able to get. I don't see the drive in Computer Management, or in Windows Explorer (I've tried with an unformatted disk, as well as after formatting a partition). I am able to see a removable device that lists the disk's model number in the Guest, but I can't seem to access the storage. (I get an entry in Device Manager that needs drivers, but nothing on the Integration Tools disc works..) Trouble-shooting steps I've tried : If put the pass-through drive on the IDE controller, I can see it in the Guest. If put the storage drive 'Online' in the host and create a VHD on it on the SCSI controller, I can see it in the Guest. I suppose I could create a fixed-size VHD that consumes the entire disk, but I'd rather not have that overhead. I've also extracted the contents of the Integration Tools drivers (x86 and amd64) and tried pointing the disk controller to each of those, with no luck. Can anyone offer suggestions as to how I can get this to work properly?

  Read the article

• How do I use a self encrypting drive?

  - by Unique_Key

  I recently purchased a Micron RealSSD c400 self encrypting drive, and I am having a few issues when trying to get it recognized by my laptop (HP Elitebook 8440p running Windows 7 x64; also tried on a custom-built desktop). When I try to initialize the drive from disk management, I get a CRC error; also, when attempting to partition it from Windows setup, the program can't create the partitions. I also tried with UBCD, nothing. I assume this is due to drive security, but I haven't been able to find much information about this online; do I need a management software or something? I'm completely stumped here. EDIT As requested, when I try partitioning the device from Windows setup I get a 0x80300024 error; when I try initializing it from disk management, I get a "Data error (cyclic redundancy check)" message, and the event log shows the following under System: Source: VDS Basic Provider, message: unexpected failure. error code 490@01010004 (2x) Source: Virtual Disk Service, message: VDS fails to write boot code on a disk during clean operation. Error code: 80070001@02070008 (1x) Source: Disk, message: The device \Device\Harddisk2\DR2 has a bad block (2x) The security logs show nothing related. Also, when attempting to configure it from UBCD (utility: HDAT2), I get an error along the lines of "can't edit partition information" or something to that tune.

  Read the article

• laptop headphone jack problems

  - by Xitcod13

  A while back my headphones mysteriously started making static noise and one of them stopped working completely. At first I thought it was headphones so I bought new ones. Alas that did not solve the problem. The problem must be inside my headphone jack. I did some research online and they suggested unplugging USB devices. Which has a strange effect of changing the static noises to high frequency Morse code noises (it's the aliens). I don't have this problem when i listen to music on speakers. The static is there on headphones whether there is music or not. I own a soldering iron for electronics and I am quite skilled at soldering. I would appreciate any help I can get. My laptop is the HDX 18. It has 2 headphone jacks that act exactly the same. Interesting thing i just noticed is that when i pull out my headphones almost all the way both of them start working but so do the speakers making the headphones kinda useless. Maybe there is a way to turn of the speakers as a temporary solution. I am using vista x64.

  Read the article

• wrt54gl reboots; troubleshooting steps?

  - by Bill

  I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

  Read the article

• how to run multiple shell scripts in parallel

  - by tom smith

  I've got a few test scripts, each of which runs a test php app. Each script runs forever. So, cat.sh, dog.sh, and foo.sh, each run a php script, and each shell script runs the php app in a loop, so it runs forever, sleeping after each run. I'm trying to figure out how to run the scripts in parallel, and at the same time, see the output of the php apps in the stdout/term window. I thought, simply doing something like foo.sh > &2 dog.sh > &2 cat.sh > &2 in a shell script would be sufficient, but it's not working. foo.sh, runs foo.php once, and it runs correctly dog.sh, runs dog.php in a never ending loop. it runs as expected cat.sh, runs cat.php in a never ending loop *** this never runs!!! it appears that the shell script never gets to run cat.sh. if i run cat.sh by itself in a separate window/term, it runs as expected... thoughts/comments

  Read the article

• Member Status: Inquorate in RHEL 5.6

  - by Eugene S

  I've encountered a strange issue. I had to change the time on my Linux RHEL cluster system. I've done it using the following command from the root user: date +%T -s "10:13:13" After doing this, some message appeared relating to <emerg> #1: Quorum Dissolved (however I didn't capture the message completely). In order to investigate the issue I looked at /var/log/messages and I've discovered these errors. Below is the output of few commands I got when tried to investigate the issue, however I don't have enough knowledge to make use of this information. [root@system1a ~]# clustat Cluster Status for system4081 @ Sun Mar 25 11:45:48 2012 Member Status: Inquorate Member Name ID Status ------ ---- ---- ------ chb_sys1a 1 Online, Local chb_sys2a 2 Offline [root@system1a ~]# cman_tool nodes Node Sts Inc Joined Name 1 M 872 2012-03-25 08:43:07 chb_sys1a 2 X 0 chb_sys2a [root@system1a ~]# qdiskd -f -d [17654] debug: Loading configuration information [17654] debug: 0 heuristics loaded [17654] debug: Quorum Daemon: 0 heuristics, 1 interval, 10 tko, 0 votes [17654] debug: Run Flags: 00000035 [17654] info: Quorum Daemon Initializing stat: Bad address [17654] crit: Initialization failed I tried to search through the internet and found out a quite similar issue here. However, for some reason I am not able to access the bug on bugzilla. The link to the bug is here

  Read the article

• Configuring suExec to work with Apache and PHP via FastCGI

  - by RandomPsychology

  I have installed ISPConfig 3 on an Ubuntu VPS and configured it for Apache + PHP via FastCGI and suexec. I am able to upload PHP apps (e.g. Wordpress) and run them normally w/ suexec. However, for some reason the PHP scripts cannot write data to disk. For instance, trying to upgrade a plugin via Wordpress' web interface causes it to fail with the error "Could not create directory /path/to/wp-content/upgrade/plugin.tmp." Trying to upload media and other assets also fails via the web. I've checked owner/group on the directory structure and it looks good. The suExec log also seems to be normal and I don't see any indicative errors in the web server logs. I can also confirm that changing the owner/group on the directories does result in the expected error in suexec.log. Additionally, I have the directory permissions set to u=rw,g=r,o= and I've also tried setting g=rw. None of this results in my scripts being able to write to the directories. What am I doing wrong?

  Read the article

• Gentoo Linux useful utilities

  - by Alakdae

  I want to make a list of utilities that come in handy in Gentoo (general Linux tools available in all distributions also appreciated). What tools and commands do you use and consider helpful in administration of a Gentoo server? I will update the list with command from answers from time to time. eclean Utility for cleaning distfiles and binary packages. Usage example: eclean distfiles Usage example output: Cleans out the files in /usr/portage/distfiles. Pretty handy. Package: app-portage/gentoolkit eix Very useful tool for getting information about a package. Similar to "emerge -s" but much faster and more precise. Usage example: eix gentoolkit Usage example output: Show information about package such as: available versions, masked versions, installed versions and description. Package: app-portage/eix eix-test-obsolete Check system for obsolete, redundant, uninstalled entries in package.keywords, package.mask, package.unmask, package.use and package.cflags Usage example: eix-test-obsolete Usage example output: Shows non-matching entries, redundant entries, and uninstalled entries. Package: app-portage/eix equery Another very useful tool for getting information about packages (listing package files, checking which files belong to which package and much more) Usage example: equery b emerge Usage example output: Show which packages installed a file called emerge Package: app-portage/gentoolkit genlop Utility for extracting information about emerged ebuilds Usage example: genlop -l --date yesterday Usage example output: Show a list of packages that have been emerged yesterdayPackage: app-portage/genlop glsa-check Checks system if it's affected by GLSAs (security issues) Usage example: glsa-check -l affected Usage example output: List of GLSA that the system is affected by. Package: app-portage/gentoolkit rc-update Utility for managing (adding, deleting) runlevel scripts. Usage example: rc-update add syslog-ng default Usage example output: Adds syslog-ng to default runlevel. Package: sys-apps/baselayout revdep-rebuild Scans libraries and binaries for missing shared library dependencies Usage example: revdep-rebuild Usage example output: Gather binaries and libraries information, check for dependencies, rebuild packages with missing dependencies Package: app-portage/gentoolkit

  Read the article

• Create Windows AMI with instance storage

  - by Jonathan Oliver

  I have a business use case and workflow where local/instance/ephemeral storage for an EC2 instance is ideal. Unfortunately I'm coupled to a Windows platform for this particular task and the EC2 Windows offering appears to have some deficiencies related to AMI creation. In essence, I'm trying to figure out if there's a way to attach local instance storage to a Windows EC2 instance using the typical command line interface (because the Amazon Website GUI doesn't support it) and then to somehow create an AMI based upon that. I've tried creating a snapshot and then creating a Windows AMI based upon the snapshot, but of course the docs say this is unsupported and makes an unbootable AMI. In short, here's what I'm trying to do: Be able to run a Windows instance (EBS/S3 instance doesn't matter) Attach local instance storage as drive D: Persist that configuration as an AMI such that I can start lots of them as necessary from either the GUI, command line, or REST API. Be able to take a launched instance, update software, shutdown, and create another AMI based upon that. Wash, rinse, repeat. One other potential option which isn't horrible, but isn't ideal is to create an AMI which has 2 EBS volumes already attached (system+apps and data). Essentially, every time I startup an instance based upon the AMI it'll create 2 new EBS volumes of pre-determined size. I'm trying to avoid that scenario if possible.

  Read the article

• Real-time local backup with versioning on Windows 7/8

  - by Borda

  I'm looking for a reliable backup solution on Windows, something with a feature set similar to Yadis. I've been using CrashPlan for 2 months, but their software lost more than 1TB of my data, that's why I'm looking for alternatives. Requirements: Real-time folder-to-folder backup: I don't need online features, I want to use this to duplicate my files between my local disks. Versioning support: Should be able to choose how many versions to keep of the files. Plain backup: I'd like to be able to open the backup without special software. No proprietary file format. External disk support: Shouldn't have any problem using external disks, at least on the source side. Backup every file, even locked/system files. (Yadis fails this one) Should start automatically, and have a comfortable GUI. Should use actively maintained and/or popular software. I don't want to use discontinued products. Optional requirements: Low RAM usage I'm not really comfortable with something that eats 1GB of my RAM. Compression support Preferably ZIP, but I'm not picky about this. Any ordinary everyday format is acceptable. Freeware or Open Source Preferred, but not necessary. I can do a one-time payment within reasonable bounds. (preferably under $100) I only need Windows support, but if it works on Linux, that's a plus. I've already searched and tried lots of software, most of them failed at the plain backup, the versioning or the locked file backup requirements.

  Read the article

• Wiping Deleted Directory Entries and Defragmenting Directories

  - by Synetech inc.

  Hi, I have seen plenty of apps that wipe free space on a disk (usually by creating a file that is as big as the remaining space) or defragment a file (usually by using the MoveFile API to copy it to a new contiguous area). What I have not seen however is a program that wipes the deleted directory entries. That is, when a file is deleted, its information (name, dates, etc.) remain in the directory, but are simply marked as empty. That leaves all kinds of information in a directory entry, and also wastes space since (at least on FAT drives), the directory may be using several clusters. For example, if a directory once had a lot of files, it will be expanded to use another cluster which could be anywhere on the disk. This means that the directory is fragmented, and may be using more clusters than needed, possibly with 100’s of unused (ie, “deleted file”) entries between active files. Does anyone know of a program that can defragment/consolidate directories (ie, wipe unused entries, and move active entries together)? (I would really rather not have to resort to writing my own yet again.) Thanks a lot. EDIT Sorry, I should have said, Windows and/or DOS, for FAT*/NTFS.

  Read the article

• Toshiba laptop cd drive read causes OS to totally freeze

  - by Fujishiro

  Okay I'll try to write an understandable summary. Forgive me if I'll fail with that attempt though. So. There is a Toshiba Satellite notebook. Got Windows 7 x86 Professional (OEM) installed on it, everything is fine (okay.. somewhat). The problem. If you put an audio or any kind of disc into the drive, something starts to eat the PC. Back then when the owner told me about this, he put an audio disc into the lappy. Winamp caused the IO load, 100%. Tried taskkill, taskkill /T, tried powershell, EVERYTHING. You just can NOT kill winamp or anything which becomes the blocker at that time. Even if you kill almost everything, laptop won't do a clear shutdown. Also I tried to use the force switch at 'shutdown' from cmd, but no use. (So: At these times you can use the laptop, but the blocker/explorer/disc becomes gray as a non-responding app. You can try to kill them, but that won't work, nor you can shutdown the machine). (Also tried using PID, but no use. For the highest IO I used the "select columns" from Task Manager and enabled the IO columns.) My first hunch was the problematic disc, autoplay and it tries to read tries to read (still shouldn't kill the PC). Disabled autoplay, removed winamp. Tried other software, etc. Everything was ok. Few days later the owner tried to put a disc into the machine and it started to reproduce the same symptoms but with a totally different disc. Uhm what to know. Virus is not an option, protected by BitDefender (valid license) and Spybot. Thanks if you have ANY idea about this strange problem. ps.: For now, the owner uses Daemon tools + Blindwrite as an alternative for those apps which wouldnt start without the disc.

  Read the article

• How to set up IP forwarding on Nexenta (Solaris)?

  - by Gleb

  I am trying to set up IP forwarding on my Nexenta box: root@hdd:~# uname -a SunOS hdd 5.11 NexentaOS_134f i86pc i386 i86pc Solaris The box has 2 network interfaces: root@hdd:~# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g1: flags=1001100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4,FIXEDMTU> mtu 1500 index 2 inet 192.168.12.2 netmask ffffff00 broadcast 192.168.12.255 ether 68:5:ca:9:51:b8 myri10ge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 9000 index 3 inet 10.10.10.10 netmask ffffff00 broadcast 10.10.10.255 ether 0:60:dd:47:87:2 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 192.168.12.0 is my normal LAN with 192.168.12.1 being the firewall/gateway 10.10.10.0 is a separate LAN for iSCSI (with no internet access) I want to set up IP forwarding so that a computer on 10.10.10.0 will be able to access the internet by using 10.10.10.10 as a gateway (I don't need any port forwarding) I have turned on IP forwarding: root@hdd:~# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing disabled disabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled Routing services "route:default ripng:default" Routing daemons: STATE FMRI disabled svc:/network/routing/rdisc:default disabled svc:/network/routing/route:default disabled svc:/network/routing/legacy-routing:ipv4 disabled svc:/network/routing/legacy-routing:ipv6 disabled svc:/network/routing/ripng:default online svc:/network/routing/ndp:default But when I dry to start ipnat, I get an error: root@hdd:~# ipnat -CF -f /etc/ipf/ipnat.conf ioctl(SIOCGNATS): I/O error Here is the config: root@hdd:~# cat /etc/ipf/ipnat.conf #!/sbin/ipnat -f - # map e1000g1 10.10.10.10/24 -> 192.168.12.2/32 So the question is how to fix this.. Thanks in advance!

  Read the article

• Getting a TTY in a Connectback Shell

  - by Asad R.

  I'm often asked by friends to help with small Linux problems, and more often than not I'm required to login to the remote system. Usually there are a lot of issues with making an account and logging in (sometimes the box is behind a NAT device, sometimes SSHD isn't installed, etc.) so I usually just ask them to make a connect-back shell using netcat (nc -e /bin/bash ). If they don't have netcat I can just ask them to grab a copy of a statically compiled binary which isn't that hard or time consuming to download and run. Though this works well enough for me to enter simple commands, I can't run any apps that require a tty (vi, for example) and can't use any job control functions. I managed to bypass this issue by running in.telnetd with a few arguments within the connect-back shell that would assign me a terminal and drop me to a shell. Unfortunately in.telnetd isn't usually installed by default on most systems. What's the easiest way to get a fully functional connect-back terminal shell without requiring any non-standard packages? (A small C program that does the job would be fine as well, I just can't seem to find much documentation on how a TTY is assigned/allocated. A solution that doesn't require me to plough through the source code for SSHD and TELNETD would be nice :))

  Read the article

• Windows 8 auto-hibernate from sleep not working on Retina MacBook Pro

  - by frenchglen

  I have a similar question to this one. Only my context is the 15" Retina MacBook Pro - and Windows 8. I have just the original Mac OS X Mountain Lion on there, then Windows 8 via Bootcamp. no rEFIt installed. (I just press ALT every time I restart windows, actually as a security measure to stop tech-unsavvy thugs, who, if the laptop is stolen, think it's only a mac and don't discover my Windows as quickly as they would've, and by that time I remotely activate various anti-theft mac apps and nab them that way). SO: like the related question asks, why isn't it behaving like it should? The Windows 7 FAQ states: Will sleep eventually drain my laptop battery? If your laptop battery charge gets critically low while the computer is asleep, Windows automatically puts the laptop into hibernation mode. But this is just not happening - on my rMBP Windows 8. It seems EVERY time I set the laptop to sleep (when it reaches 10%), then arriving home and plugging it in and hoping to simply resume my work, it does NOT save the session to disk and I lose ALL my work. Who's fault is it? Win 8's (a bug, grr)? Or Apple's EFI system (maybe fixable via editing EFI options/do I have to install refit to make it work perhaps?) Or maybe changing windows power options can somehow fix the problem? Thanks for your help.

  Read the article

• "cannot receive new filesystem stream: invalid backup stream" error when unpacking flash archive on solaris 10

  - by Bovril

  I've searched around but i'm having no luck with some peculiar behavior with a flash archive. I'm using HP Server Automation 9.14 to deploy the OS. I'm creating a Solaris 10 flash archive to create a snapshot default build in our environment. I create the flash archive with # flar create -c -S -n g8-solaris10-u10 g8-solaris10-u10.flar It seems to create the file without any problems (exit status 0). When deploying to a new system (same hardware), it extracts to a point and then bails. The last error in the log I can see is Extracted 2047.00 MB ( 82% of 2488.98 MB archive) ERROR: Could not read file (172.27.118.100:/media/opsware/sunos/flar/g8-solaris10-u10.flar ERROR: Errors occurred during the extraction of flash archive. The file /tmp/flash_errors contains the list of errors encountered ERROR: Could not extract Flash archive ERROR: Flash installation failed The error log contained the following message cannot receive new filesystem stream: invalid backup stream A previous version of this flash archive (1.8gb) worked ok, so I suspect size may be a factor. The source system (the one the flash archive is an image of) is an HP BL460C GEN8 some more info below. OS version Info # uname -a SunOS testhostname 5.10 Generic_147441-01 i86pc i386 i86pc # who -r . run-level 3 Oct 15 08:15 3 0 S disks # echo | format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t0d0 <DEFAULT cyl 17841 alt 2 hd 255 sec 63> /pci@0,0/pci8086,3c06@2,2/pci103c,3355@0/sd@0,0 Specify disk (enter its number): Specify disk (enter its number): zpools # zpool list NAME SIZE ALLOC FREE CAP HEALTH ALTROOT rpool 136G 24.6G 111G 18% ONLINE - Zones # zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / native shared The file size of 2047 seems suspiciously close to 2048, which is concerning. Any help would be greatly appreciated. Thanks

  Read the article

• Clustering/load balancing for cluster unaware applications

  - by AaronLS

  Forgive me if I use any of these terms incorrectly. I am wondering if there is any kind of software that would allow my two "join" two computers together such that a cluster unaware application could utilize their combined computing resources? By "cluster unaware" I mean an application that isn't designed to share work across multiple services. My understanding is that clustering is enabled by the specific application by it's architecture, such that messaging with multiple instances of the application coordinate the sharing of work. Instead I am looking for something that enables clustering at the OS or virtualization level, so that any application could essentially be clustered. Failing that, I am also wondering about the following scenario: We have 3 different applications we will call A, B, and C. We have 2 single core computers. At any given time lets say that any combination of those applications will be CPU intensive. In cases where only 2 of those apps are very active, have one of them moved over to a different server. In a nutshell, some sort of dynamic automatic shuffling of the application's load. I have heard of virtual machines that can be migrated across physical machines while live, but I am wondering if this can be done automatically in response to an application's or VM's CPU activity?

  Read the article

• How to compare old CPU to new CPU?

  - by Lasse V. Karlsen

  I hope this question doesn't get closed at once :) I have an old laptop, a Compaq NC4200, which is going its final laps around the track these days. Battery is dead, and everything kinda runs slow. It also has only 1GB of memory, and even though I don't know if it can take more, I probably wouldn't be able to get hold of any that matches without having to special order it. The size, however, has been ideal for my usage pattern, so I'm looking to replace it with a similarly sized laptop, at least in the same size category. However, it's been a while since I tried keeping track of CPUs, so I have a question. The old laptop has a Intel Pentium M 760 1.86GHz processor. One laptop I found online has a Intel Pentium SU4100 1.3GHz dual-core. This type of processor seems to be quite common in the price and size-range I've been looking. What kind of relative performance boost could I expect from the old one to the new one? I am not expecting a "about 7.45x speed", but some indication would be nice. For instance, dual-core tells me it might be akin to 2.6GHz, but I assume I can't simply compare 1.86GHz to 2.6GHz and expect the new one to run about 1.4x as fast, I expect more these days. Or is that unrealistic for this kind of processor? Do I need to up my price range and go for a 2+ GHz processor?

  Read the article

• UPS with a HP Proliant server

  - by Groo

  We placed a EATON Ellipse Max 1500 (900W) as the UPS for our HP Proliant ML350 G6. Upon first power failure (actually we only moved the UPS' input plug to a different socket), server immediatelly turned off, and the Health LED turned red and started blinking. UPS was in operation for about a week before that, with battery fully charged to 100%. Since our server's hot-plug supply is 460W, we are pretty sure we haven't overloaded it, the server was completely idle at that time (no web or win apps running except Windows Server core services). Then we tried to do the same with a different, no-name older PC (Core 2 Duo, 2Gb RAM) with a generic power supply (not sure what the power is) and it continued working when we pulled the plug out. UPS load was less than 15% (measured in the provided Eaton utility). We measured the UPS' output voltage using a smart oscilloscope and the THD of the UPS output waveform turned out to be 40%. Did you have similar experiences? Could this be a faulty UPS? Or a faulty power supply? Or some HP sensors configured to trigger too strictly? I wouldn't like replacing this UPS with the same brand, to get same results. [Edit] I also tried to do this while the server is turned off. While the UPS is working on battery, server will not start - as soon as I press the power button, Health LED starts blinking red.

  Read the article

• IIS 6 ASP.NET default handler-mappings and virtual directories

  - by mlauter

  I'm having a problem with setting a default mapping in IIS 6. I want to secure *.HTML files with ASP.NET forms authentication. The problem seems to have something to do with using virtual directories to hold the html files. Here's how it's setup: sample directory tree c:/inetpub/ (nothing in here) d:/web_files/my_web_apps d:/web_files/my_web_apps/app1/ d:/web_files/my_web_apps/app2/ d:/web_files/my_web_apps/html_files/ app1 and app2 both access the same html_files directory, so html_files is set as a virtual directory in the web apps in IIS... sample web directory tree //app1/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) //app2/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) If I put a file called test.html in the root of //app1/ and then add the default mapping to the asp.net dll and setup my security on the root folder with deny="?", then accessing test.html works exactly as expected. If I'm not authenticated, it takes me to the login.aspx page, and if I am authenticated then it displays test.html. If I put the test.html file in the html_files directory I get a totally different behavior. Now the login.aspx page loads and I stuck some code in to check if I was still authenticated: <p>autheticated: <%=User.Identity.IsAuthenticated%></p> I figured it would say false because why else would it bother to load the login page? Nope, it says true - so it knows i'm authenticated, but it won't give me access to the test.html file. I've spent several hours on this and haven't been able to solve it. I'm going to spend some more time on google to see if I've missed something. Fingers crossed.

  Read the article

• weird POST request in IIS logs

  - by MIrrorMirror

  I noticed weird log entries (unless there's something i don't understand) in my IIS (7.5) logs. it's an online dictionary with requests ( user friendly url rewriting ) and most of them are GET. However I noticed weird POST requests which are taking place by a person who is trying to crawl our content ( tens of thousands of such requests ) 2013-11-09 20:39:27 GET /dict/mylang/word1 - y.y.y.y Mozilla/5.0+(compatible;+Googlebot/2.1;++http://www.google.com/bot.html) - 200 296 2013-11-09 20:39:29 GET /dict/mylang/word2 - z.z.z.z Mozilla/5.0+(iPhone;+CPU+iPhone+OS+6_0+like+Mac+OS+X)+AppleWebKit/536.26+(KHTML,+like+Gecko)+Version/6.0+Mobile/10A5376e+Safari/8536.25+(compatible;+Googlebot-Mobile/2.1;++http://www.google.com/bot.html) - 200 468 2013-11-09 20:39:29 POST /dict/mylang/word3 - x.x.x.x - - 200 2593 The two first requests are legal. Now for the third request, I don't think I have allowed cross domain POST. if that what the third log line means. all those POST requests take that much time for unknown reasons to me. I would like to know how are those POST requests possible and how can I stop them. p.s. I have masked the IPs on purpose. any help would be appreciated! thank you in advance.

  Read the article

• File sharing for small, distributed, non-technical, non-profit organization?

  - by mnmldave

  Problem: I've started volunteering for a small non-profit with fewer than five non-technical Windows users who need to share 20-30GB of files (Office documents, images, PDFs, etc.) amongst themselves online. Background: The users are accustomed to a Windows network share on a machine that backed up their data locally. An on-site "disaster" has forced them to work from their homes for awhile and to re-evaluate their file sharing needs (office was located in an old building with obvious electrical issues, etc.). Access to time from volunteers with IT experience seems to be difficult. Demonstrably minimizing energy consumption is a nice-to-have. I'm currently considering Jungle Disk (a Desktop account shared amongst the handful of employees since their TOS and my inquiries to their helpdesk seem to indicate this is permissible). It appears easy-to-use, inexpensive, secure, has backup functionality, and can scale to accomodate more data when needed. I've not used it myself though (have only used Dropbox for personal use) and systems isn't my area of expertise, so am worried I might be jumping on a bandwagon. That said, any suggestions, thoughts or similar experiences would be really appreciated.

  Read the article

• Is there a way to extract a "private certificate key" from Chrome and import it into Firefox ?

  - by user58871

  This is a classical Catch-22 situation. I was using online banking the other day under Chrome. I had to order a digital certificate so that I could extend my privileges. The stupid thing is that when I got approved and opened the certificate installation menu, I saw only versions for IE/Firefox available. What the heck, I said, and chose FF - the result I got was Error 202 - ERR:CERT:INVALID. I opened FF, got to the same page, and tried to install the damn thing from there, but got a message basically saying that I must have been given a private key which obviously FF doesn't find. I read a bit, and it turned out that I really must have been given such a key but only to the browser that I ordered the cert with, i.e. Chrome. The worst thing is that if I deactivate my order, and reissue a new cert, this time from FF, I MUST go to a bank office (!!!WTF), but I am currently studying abroad, so I can't just go back. Is there a way, that I could extract that key from Chrome's profile, and import it into FF under Windows ? I will be glad to know

  Read the article

• Linux: Managing users, groups and applications

  - by RN

  I am fairly new to linux admin so this may sound quite a noob question. I have a VPS account with a root access I need to install Tomcat, Java on it and later other open source applications as well. Installation for all of these is as simple as unzipping the .gz in a folder. My questions are A) Where should I keep all these programs? In Windows, I typically have a folder called programs under c:\ where I unzip all applications. I plan to have something similar here as well. Currently, I have all these under apps folder under/root- which I am guessing is a bad idea B) To what group should Tom belong to ? I would need a user - say Tom who can simply execute these programs. Do I need to create a new group? or just add Tom to some existing group ? C) Finally- Am I doing something really stupid by installing all these application by simply unzipping them? I mean an alternate way would be to use Yup or RPM or something like that to install these applications. Given my familiarity and (tight budget) that seems too much to me. I feel uncomfortable running commands which i don't understand too well

  Read the article

< Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >