Search Results

Search found 89335 results on 3574 pages for 'server restart'.

Page 529/3574 | < Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >

• Multiple authoritative DNS server on same IPv4 address

  - by Adrien Clerc

  I'd like to maintain a DNS tunnel on my self-hosted server at example.com. I also have a DNS server on it, which serves everything for example.com. I'm currently using dns2tcp for DNS tunneling, on the domain tunnel.example.com. NSD3 is used for serving authoritative zones, because it is both simple and secure. However, I have only one public IPv4 address, which means that NSD and dns2tcp can't listen on the same IP/port. So I'm currently using PowerDNS Recursor using the forward-zones parameter like this: forward-zones-recurse=tunnel.example.com=1.2.3.4:5354 forward-zones=example.com=1.2.3.4:5353 This enables request for authoritative zone to be asked to the correct server, as well as for tunnel requests. NSD is listening on port 5353 and dns2tcp on port 5354. However, this is bad, because the recursor needs to be open. And it actually answers to any recursive query. Do you have any solution for that? I really prefer a solution that doesn't involve setting up BIND, but if you are in the mood to convince me, don't hesitate to do so ;) EDIT: I change the title to be clearer.

  Read the article

• lighttpd: Backend is overloaded + fcgi-server re-enabled + all handlers are down

  - by AbuZubair

  We have a standard lighttpd deployment with PHP-CGI and our error logs are flooding with the following. This is causing a huge problem because we keep returning 500's to our clients: 2012-10-14 14:28:38: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 36 2012-10-14 14:28:38: (mod_fastcgi.c.2764) fcgi-server re-enabled: 0 /tmp/php-7735.socket 2012-10-14 14:28:39: (mod_fastcgi.c.2764) fcgi-server re-enabled: 0 /tmp/php-7735.socket 2012-10-14 14:28:40: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 37 2012-10-14 14:28:40: (mod_fastcgi.c.2764) fcgi-server re-enabled: 0 /tmp/php-7735.socket 2012-10-14 14:28:41: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 57 2012-10-14 14:28:41: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 57 2012-10-14 14:28:42: (mod_fastcgi.c.3597) all handlers for /index.php? on .php are down. Does anyone have any clue as to what is going on? We restarted all php and lighttpd related processes and that didn't fix the problem. We ended up rebooting the whole box and now its gone away, although we fear it may come back later.... In general our deployment has been doing fine for a long time and this is the first time this has happened.

  Read the article

• Linux pptp client stops working after several hours

  - by Aron Rotteveel

  Here's the situation: Setup: 1 Windows Server 2008 machine acting as a Domain Controller and RRAS server 1 CentOS machine in a datacentre located elsewhere PPTP client running on CentOS machine, connected to the DC via When I connect to the DC, everything is working fine. I have set up a static IP for the dialup connection in my RRAS server so that the CentOS machine is automatically assigned the IP 192.168.1.240. Inside the VPN, it is not possible to access this machine on the local IP-address. Perfect. However, after several hours, it simply seems to stop working (IE: I cannot ping to or from this machine on the local network). The strange thing is, however: The DC shows the VPN client as still being connected The CentOS machine shows the network interface as being up There are no entries in my /var/log/messages that indicate a problem Output from ifconfig: ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.240 P-t-P:192.168.1.160 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1396 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:4511 (4.4 KiB) TX bytes:15071 (14.7 KiB) Output from route -n: 192.168.1.160 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ppp0 I have the following in my ip-up.local: route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0 The situation can be easily fixed by issueing a killall pppd and re-connecting. However, I obviously do not want to do this every X-hours or so. I have tried running pppd with both the debug as the kdebug flag but cannot find the cause of this problem. Currently, my ppp0 network interface seems to be running and the last log lines mentioning it are: Feb 19 14:10:40 graviton pppd[10934]: local IP address 192.168.1.240 Feb 19 14:10:40 graviton pppd[10934]: remote IP address 192.168.1.160 Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up started (pid 10952) Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up finished (pid 10952), status = 0x0 Feb 19 14:11:27 graviton pptp[10935]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 190 (expecting 189, lost or reordered) Feb 19 14:11:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:11:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:12:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:13:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:14:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:15:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:16:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:679]: no more Echo Reply/Request packets will be reported. I have enabled the persist option. The network interface is still running, but it is still impossible to send data through the VPN. Any help is appreciated.

  Read the article

• exim4 - disable autoreplies about "SMTP error from remote mail server after RCPT"

  - by osgx

  Hello I have a setup of exim4 on domain1 in front of other server, domain2 (with sendmail). Second server have no direct access to internet, so domain1 is MX for domain2. And domain2 is set as hubbed_host in the exim4 on domain1. When spammer sends message for no_such_user@domain2, its sendmail do a reject: 550 5.1.1 <no_such_user@domain2>... User unknown Then, exim4 at domain1 do an auto-reply like this: This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: no_such_user@domain2 SMTP error from remote mail server after RCPT TO:<no_such_user@domain2>: host 10.0.0.1 [10.0.0.1]: 550 5.1.1 <no_such_user@domain2>... User unknown The spammers uses fake "from" field, and such generated messages are frozen by exim for a long time. How can I disable some or all autoreplies from exim4? Ideally, I want a filter, if message was not delivered with error "User unknown" than don't generate any autoreply from mailer-daemon. Thanks!

  Read the article

• Web server with static IP from cable provider

  - by Dmitri

  I have a subscription to 5 static IP addresses. I want to run a web server from behind a router. My network config is as follows: Server's local address is 10.1.10.2, has IIS running on it, port 80 and 443 (IIS is not my fault, had to be done) the server's ip address is static, the subnet mask is 255.255.255.0, gateway is 10.1.10.1, which is the local address of the cable modem / router / gateway thingy. All looks to be in textbook order as far as the LAN goes. I can get to anything on my LAN from any computer on my LAN, whether they have static IP or get it through DHCP from the cable modem/router thingy. however, I have no internet access form any of my LAN computers. I called Comcast tech support and they say they can connect to my modem/router just fine and can actually use it to ping any computer on the internet or any computer on my LAN from the router/modem (i checked, myself, this is in fact the case). However, nothing on my LAN has internet connectivity. I tried pinging the DNS servers, nothing. I tried directly typing in web sites' IP addresses, nothing, so doesn't seem to be a DNS issue. Any Ideas? What malfunction of a router could be causing such weird behavior? nay ideas or educated guesses are very much appreciated.

  Read the article

• Scheduled tasks fail to start unless I'm logged in to the server

  - by Chuck

  Tasks need to open a CMD window and pass net use commands, then do a DIR command, pipping the output to a file on the server. Log in as either me (Sysadmin) or with one of the system accounts and task will only run if I'm physically logged into the server. Run as batch file is set in security properties for both users (me and service account), security is granted to all directories, etc. It almost acts like a scheduled task, since it is not physically connected to a display can't create a CMD window and pass the WinID so the command can be sent. I'm guessing. Anyone know of a document that explains how the server handles initiation of a window if done via scheduled task and no attached user is associated with the task? If I log onto the box and run the scheduled tasks they run fine, but produce no errors or event log entries and then just show that it ran successfully and sets the next run time. Have tried both with the run if logged in checkbox on and off and makes no difference. Other tasks work fine, except that they are acting on local drives with no display writing or updating taking place, so I'm guessing the system either can't instantiate a window if no display is connected to a logged on user, or it can't establish a point if it is trying to create a virtual screen. You'd think it is just creating a memory map and then mapping it to a device to display, but that doesn't seem to be the case, but I can find no documentation on how the system handles a scheduled task and how to invoke a fake or virtual screen that it could write to so it appears that a user was connected. Thanks This is driving me nuts and I've tried everything I can think of as well as our network boys ideas and nothing seems to work.

  Read the article

• ASP.NET Website Administration Tool: Unable to connect to SQL Server database

  - by MedicineMan

  I am trying to get authentication and authorization working with my ASP MVC project. I've run the aspnet_regsql.exe tool without any problem and see the aspnetdb database on my server (using the Management Studio tool). my connection string in my web.config is: <connectionStrings> <add name="ApplicationServices" connectionString="data source=MYSERVERNAME;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> The error I get is: There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: Unable to connect to SQL Server database. In the past, I have had trouble connecting to my database because I've needed to add users. Do I have to do something similar here?

  Read the article

• python mysqldb - mysql server gone away - can't reconnect

  - by david.barkhuizen

  Hi Folks, When attempting to import a bunch of data into mysql tables using python and mysqldb, I run into the following error '2006 - mySQL Server has gone away', and then I am unable to reconnect again within the script. I am iniitially re-using a connection object across transactions ( delineated by conn.commit() ), then when I first encounter this exception, if I create a new connection by calling MySQLdb.connect(), this new connection also fails with the same exception. This error does not occur immediately, I can pump a fair amount of data into the db, but then faithfully occurs after I have inserted a couple thousand records, so roughly once the db has committed a certain transaction volume, it always falls over like this. If I rerun the script, WITHOUT restarting the db server. then it resumes where it left off, pumps in some data, then falls over again. Before recommendations to change time-out timings, does anyone know why I am not able to establish a new connection after the initial failure ? - Even if I try a couple of times waiting a couple of seconds between each. (btw, I'm running Windows 7, mysql server 5.1.48, mysqldb 1.2.3.gamma.1, python 2.6)

  Read the article

• weblogic plug-in apache http server location directive question

  - by user39510

  We are using Weblogic Portal and Apache 2.x http server with the weblogic plug-in for apache for load-balancing. We have an application that right now can only be accessed from one of our managed servers. What I would like to do is use the Location directive to direct all requests for that page to the one managed server and I can't get it to work. The context that the portal tries to forward to is something like /MyWebApp?portalusername= (where equals a legitimate user. For example /MyWebApp?portalusername=joesmith. All other applications and the plug-in is load balancing as expected because every now and then you'll get sent to the second managed server for this particular application and its not deployed. I tried various things in the Apache http.conf like the following but can't seem to get it work. Any suggestions? The following is a snippet of the httpd.conf. Its a standard out of the box httpd.conf file with the weblogic plugin configuration. <Location /MyWebApp> SetHandler weblogic-handler WebLogicCluster myserver:7011 </Location> <Location /?> SetHandler weblogic-handler WebLogicCluster myserver:7011, myserver2:7012 </Location>

  Read the article

• Server 2003, XP Clients, DNS issues

  - by ron

  Hello, Im having DNS issues on my network. My DC is my DNS server 10.76.4.11 and recently I configured a forwarder to 10.4.36.10. My workstations are not working because they cannot resolve the domain controller name because of DNS. an ipconfig /all reveals that they know the IP of the DNS server is 10.76.4.11, but if I nslookup 10.76.4.11 it forwards the request to 10.4.36.10 and goes nowhere. I have since removed the forwarder, but still any nslookup requests on workstations are going to 10.4.36.10. If I nslookup 10.76.4.11 on the server it can resolve its name, but for some reason when it receives the same request from workstations it doesnt know what to do. All the A, CNAME records etc are correct. DHCP's DNS is set correctly, GPOs are correct (even though they cant refresh cos of this problem!), the servers network adapter has its DNS set to 10.76.4.11. Just don't know. Very confused.

  Read the article

• What's required to configure Ubuntu to use a specific DNS server?

  - by ks78

  I've setup two Amazon EC2 instances, both running Ubuntu Server. One is configured as a DNS server running bind9, which will be used to allow EC2 instances to communicate with each other based on hostname rather than IP, since their private IPs may change. I think I have the DNS server setup correctly. I want to use the second EC2 instance to test the DNS server. Using Webmin, I've added the DNS server's private IP to the client's DNS Servers list and added the domain to the Search Domains list. I did have to edit /etc/dhcp3/dhclint.conf to make my changes stick. After reboot, I expected I'd be able to ping or nslookup the DNS server from the test client, but it can't seem to find the server. Is there something I'm missing? What's required to configure an Ubuntu client to use a DNS server? I just want to make sure I'm not missing something before I assume the server's the problem.

  Read the article

• Setting up RADIUS + LDAP for WPA2 on Ubuntu

  - by Morten Siebuhr

  I'm setting up a wireless network for ~150 users. In short, I'm looking for a guide to set RADIUS server to authenticate WPA2 against a LDAP. On Ubuntu. I got a working LDAP, but as it is not in production use, it can very easily be adapted to whatever changes this project may require. I've been looking at FreeRADIUS, but any RADIUS server will do. We got a separate physical network just for WiFi, so not too many worries about security on that front. Our AP's are HP's low end enterprise stuff - they seem to support whatever you can think of. All Ubuntu Server, baby! And the bad news: I now somebody less knowledgeable than me will eventually take over administration, so the setup has to be as "trivial" as possible. So far, our setup is based only on software from the Ubuntu repositories, with exception of our LDAP administration web application and a few small special scripts. So no "fetch package X, untar, ./configure"-things if avoidable. UPDATE 2009-08-18: While I found several useful resources, there is one serious obstacle: Ignoring EAP-Type/tls because we do not have OpenSSL support. Ignoring EAP-Type/ttls because we do not have OpenSSL support. Ignoring EAP-Type/peap because we do not have OpenSSL support. Basically the Ubuntu version of FreeRADIUS does not support SSL (bug 183840), which makes all the secure EAP-types useless. Bummer. But some useful documentation for anybody interested: http://vuksan.com/linux/dot1x/802-1x-LDAP.html http://tldp.org/HOWTO/html_single/8021X-HOWTO/#confradius UPDATE 2009-08-19: I ended up compiling my own FreeRADIUS package yesterday evening - there's a really good recipe at http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html (See the comments to the post for updated instructions). I got a certificate from http://CACert.org (you should probably get a "real" cert if possible) Then I followed the instructions at http://vuksan.com/linux/dot1x/802-1x-LDAP.html. This links to http://tldp.org/HOWTO/html_single/8021X-HOWTO/, which is a very worthwhile read if you want to know how WiFi security works. UPDATE 2009-08-27: After following the above guide, I've managed to get FreeRADIUS to talk to LDAP: I've created a test user in LDAP, with the password mr2Yx36M - this gives an LDAP entry roughly of: uid: testuser sambaLMPassword: CF3D6F8A92967E0FE72C57EF50F76A05 sambaNTPassword: DA44187ECA97B7C14A22F29F52BEBD90 userPassword: {SSHA}Z0SwaKO5tuGxgxtceRDjiDGFy6bRL6ja When using radtest, I can connect fine: > radtest testuser "mr2Yx36N" sbhr.dk 0 radius-private-password Sending Access-Request of id 215 to 130.225.235.6 port 1812 User-Name = "msiebuhr" User-Password = "mr2Yx36N" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 rad_recv: Access-Accept packet from host 130.225.235.6 port 1812, id=215, length=20 > But when I try through the AP, it doesn't fly - while it does confirm that it figures out the NT and LM passwords: ... rlm_ldap: sambaNTPassword -> NT-Password == 0x4441343431383745434139374237433134413232463239463532424542443930 rlm_ldap: sambaLMPassword -> LM-Password == 0x4346334436463841393239363745304645373243353745463530463736413035 [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user testuser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding ... It is clear that the NT and LM passwords differ from the above, yet the message [ldap] user testuser authorized to use remote access - and the user is later rejected...

  Read the article

• plesk 9 spamassassin server wide blacklist via cron?

  - by Kqk

  we're running ubuntu 8.04 LTS and plesk 9.2 our simple task is to set up a periodic black list for spamassassin, e.g. using this script .. #!/bin/sh #! Script by AJR to update local spamassassin rules cd /tmp wget -c http://www.stearns.org/sa-blacklist/sa-blacklist.current mv sa-blacklist.current local.cf -f mv local.cf /etc/mail/spamassassin -f rm local.cf -f /etc/init.d/psa-spamassassin restart now, this script runs fine, but plesk doesn't seem to recognize the blacklist in its GUI. which is annoying, especially because plesk itself writes to /etc/mail/spamassassin/local.cf. i wasn't able to find out the secret place, where plesk distinguishes between entries in local.cf added via GUI and command line. any help is appreciated! thanks.

  Read the article

• MS SQL Server slows down over time?

  - by Dave Holland

  Have any of you experienced the following, and have you found a solution: A large part of our website's back-end is MS SQL Server 2005. Every week or two weeks the site begins running slower - and I see queries taking longer and longer to complete in SQL. I have a query that I like to use: USE master select text,wait_time,blocking_session_id AS "Block", percent_complete, * from sys.dm_exec_requests CROSS APPLY sys.dm_exec_sql_text(sql_handle) AS s2 order by start_time asc Which is fairly useful... it gives a snapshot of everything that's running right at that moment against your SQL server. What's nice is that even if your CPU is pegged at 100% for some reason and Activity Monitor is refusing to load (I'm sure some of you have been there) this query still returns and you can see what query is killing your DB. When I run this, or Activity Monitor during the times that SQL has begun to slow down I don't see any specific queries causing the issue - they are ALL running slower across the board. If I restart the MS SQL Service then everything is fine, it speeds right up - for a week or two until it happens again. Nothing that I can think of has changed, but this just started a few months ago... Ideas? --Added Please note that when this database slowdown happens it doesn't matter if we are getting 100K page views an hour (busier time of day) or 10K page views an hour (slow time) the queries all take a longer time to complete than normal. The server isn't really under stress - the CPU isn't high, the disk usage doesn't seem to be out of control... it feels like index fragmentation or something of the sort but that doesn't seem to be the case. As far as pasting results of the query I pasted above I really can't do that. The Query above lists the login of the user performing the task, the entire query, etc etc.. and I'd really not like to hand out the names of my databases, tables, columns and the logins online :)... I can tell you that the queries running at that time are normal, standard queries for our site that run all the time, nothing out of the norm.

  Read the article

• Double default gateway ubuntu server

  - by Elena

  I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• proftpd, dynamic IP, and filezilla: port troubles

  - by Yami

  The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

  Read the article

• SOGo installation on Mail Server

  - by i.h4d35

  We run a normal mail server on cPanel for web-based email. We've just got a request to add Calendar, address book, tasks functions; mobile capabilities (I'm guessing acces via a mobile client/app); public folders etc. On the client-side, we have some people using webmail, some use MS Outlook and some others use Mozilla Thunderbird. Having looked around, I zeroed in on SOGo, Citadel and kolab as options for this. I read through SOGo's official install guide and also checked here and here. However, I see most of the HowTo's ask installation of MySQL/PgSQL, LDAP, Samba etc. While I can manage installation of Samba (if required), I have no idea if installing LDAP, MySQL etc is really required. Also, any guidance as to how to install on a regular mail server would be appreciated. Sorry if this sounds vague. If any more information is required, I'll be happy to give it. Thanks in advance. Edit: This server in question has always been governed via cPanel (to install PHP, MySQL, configure DNS etc). So I am confused if really need LDAP.

  Read the article

• Dual Xeon Server voltages are low

  - by Mindflux

  I've got a whitebox server running CentOS 5.7. It's a Dual Xeon 5620, 24GB of RAM. The mainboard is a SuperMicro X8DT6-F and the chassis is a SC825TQ-R720LPB. Dual 720W Power supplies. We had a big power outage a couple weeks back that took down everything, I don't have any pre-power outage figures for this server, and the only reason I noticed these is because when I was bringing up the servers I was checking them out with more scrutiny than usual. http://i.imgur.com/rSjiw.png (Image of voltage readings) As you can see, CPU1 DIMM is low, +3.3V is high, 3.3VSB is high, +5v is high, +12v is REAL LOW (out of normal 5% (plus/minus))... and VBAT is off the charts. With my whitebox VAR we've tried the following: Swap out PSU with another server I have with the same PSUs. Try different power cord Update BMC/IPMI firmware in case readings were wrong (They aren't) Update BIOS Try different PDU Try a different outlet and/or circuit Replaced Voltage Regulator Unit At this point, the only thing we haven't done, seemingly is replace the mainboard.. which is what the next step will be unless something else shines some light on the situation. I should mention the system is rock solid otherwise which is a surprise given the 12v voltage is that far off.

  Read the article

• Mac - Run java program at launch

  - by emd

  I want to launch a java program (server program) at computer start up. I can run it from the command line perfectly. I created /Library/Server/startFS.sh. The file is executable by root and contains: cd /Library/Server/FiloSync /usr/bin/java -jar /Library/Server/FiloSync/filosync-server-latest.jar -p 7000 -s 7001 I can't get my launchd plist included here, the formatting is all off. I can run it fine from the command line: './startFS.sh' but when I put create the plist (via Lingon), nothing happens. Now, when run, it outputs a few lines to the console. Might that be problem?? I have tried prepending 'nohup' and post pending '&', but no combination seems to work. Help please.

  Read the article

• Can't Connect To Local Mysql Using IP Address, but CAN connect from remote server

  - by user1782041

  Here's an interesting one that does not seem to fall into any of the mysql connection issues I've read about or searched for: On an Ubuntu 12.04 box I had some system updates waiting to install, and I took care of that this evening. After the install, I started seeing some errors in my syslog complaining about a particular php script that could no longer connect to the mysql instance on the box. Here is the specific error: PHP Warning: mysql_connect(): Can't connect to MySQL server on '192.168.0.40' (4) Now, the server's IP address is 192.168.0.40, and I've checked to make sure that I have mysql listening on 0.0.0.0 so that I can connect using either "localhost" or "192.168.0.40". Here's where things get odd: From the local machine, if I try the following: mysql -uroot -p -h192.168.0.40 I get this error: ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.0.40' (110) I've checked, and error 110 indicates an OS timeout, and error 2003 is the mysql generic "can't connect" error. This indicates that it is not permissions with the user. However, if I do the same thing from a remote machine (say, from 192.168.0.30), I log right in with no problems. Futher, other scripts on the local machine that connect to mysql using "localhost" for the host rather than "192.168.0.40" connect with no problems. Also, I can connect via the mysql socket with no problems both from the command line and php scripts. So, this feels like a networking issue of some kind on the local box, but there are no iptables rules on this box (it is firewalled externally) and I can't figure out what else may be causing this. This problematic script worked perfectly prior to the latest system update. For now, I'll simply change the script to connect via localhost, but I'd really like to know why it broke for 2 reasons: There may be other scripts that connect using 192.168.0.40 that don't run very often which are now broken. Auditing them all will take more time than I feel like devoting at the moment. I'm curious, and want to know why it broke so I can fix it correctly. Any help?

  Read the article

• PXE boot -- kernel not found on TFTP server

  - by user70523

  I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• Virtual host “Forbidden You don't have permission to access / on this server” on debian

  - by ulduz114

  Before I created a virtual host I could see "http://localhost", but when I created a virtual host I could not see "http://localhost" and my virtual host "http://test" Here is my virtualhost config file: <VirtualHost test:80> ServerAdmin [email protected] ServerName test ServerAlias test DocumentRoot "/home/javad/Public/test/public" <Directory "/home/javad/Public/test/public/" > Options Indexes FollowSymLinks MultiViews ExecCGI DirectoryIndex index.php AllowOverride all Order allow,deny allow from all </Directory> </VirtualHost> so I ran a2ensite test and added 127.0.0.1 test to /etc/hosts file and restart apapche2 fine But after that I cannot access to http://test or even http://localhost i get Forbidden You don't have permission to access / on this server. When I delete my virtual host setting I can access http://localhost

  Read the article

• how to change port number of Apache server in windows OS

  - by jesop

  I have installed xampp control panel and Apache 2.2 on windows XP when I type http://localhost/ gives me page which says It Works! Now, I want to change the port number 80 to some other number How to change it ? in how many files does it needs to be changed ? dose it require to restart the system to change to take effect ? Note: I have changed port number in C:\xampp\apache\conf\httpd.conf in two places where it says Listen 80 and ServerName localhost:80 Pls help, thanks.

  Read the article

• In SASL authentication, are the messages between a particular client and server the same every time

  - by karenc

  I wrote a test client and server using the Cyrus SASL library, and I'm manually forcing it to select GSSAPI as the mechanism. While debugging, I printed the md5sum of each message as it was passed between the two. I noticed that the sequence seems to be the same every time I connect. That is, if the message sequence on the first negotiation was clientMessage1, serverResponse1, clientMessage2, etc... to successful authentication, if I then restart my client, the same clientMessage1, serverResponse2, clientMessage2,etc... sequence is repeated. It seems to me like it would be a security concern. Is this the correct behavior and if so, should I be wrapping these communications in TLS or something?

  Read the article

• Could this server log mean my server is being used as a proxy?

  - by So Over It

  I came across the following entry in my access.log: 58.218.199.147 - - [05/Jun/2012:12:56:04 +1000] "GET http://proxyproxys.com/ HTTP/1.1" 200 183 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" Normally when I see a full URL entry in my access.log I assume it is log spam with people trying to get me to access their site. These entries are normally followed with a 404 response. The above entry is followed with a 200 'success' response! Doing some searching it would seem that this can occur when someone is trying to use your server as a proxy. This disturbed me more - especially because the URL in question has the word proxy in it. Going to the site 'proxyproxys.com' (using hidemyass.com to protect my own identity), the site returns what appears to be some sort of 'proxy judge' ---------------------------------------- HTTP_ACCEPT=text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 HTTP_ACCEPT_LANGUAGE=en-US,en;q=0.8 HTTP_USER_AGENT=Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.53 Safari/536.5 HTTP_CONNECTION=close REMOTE_PORT=56355 REMOTE_HOST=74.63.112.142 REMOTE_ADDR=74.63.112.142 ---------------------------------------- CS_ProxyJudge Result=HIGH_ANONYMITY ---------------------------------------- Question: 1) does the 200 success mean that someone has been able to successfully use my server as a proxy? 2) are there other means of confirming if my server is being used as a proxy 3) can you refer me to documentation to help 'close up' my security gap if there is one. Thanks.

  Read the article

< Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >