Search Results

Search found 22499 results on 900 pages for 'boot screen'.

Page 53/900 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • "Disk boot failure" error after installing Windows 7 on SSD

    - by Tony_Henrich
    I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

    Read the article

  • Is it possible to boot from internet?

    - by Calmarius
    Let's assume the following situation: you have a computer with empty hard disk, and you don't have a CD, floppy, pen drive nearby to boot the computer from. But you have connection to the Internet. Modern computers support network booting using PXE, but I haven't found anything regarding booting via the internet. So, is it possible to use PXE to load an image from the internet and boot it? By having a running system (even a minimal Linux) in RAM, it should be possible to install it on the hard disk, and build up a working system from here.

    Read the article

  • How to edit the Boot Graphics Resource Table / Edit windows 8 BOOT LOGO?

    - by user144773
    I want to edit the screen which is displayed when windows 8 (starts) loads (/loading). As for now it has the Toshiba logo, I want my custom logo or the windows default logo. I have found that UEFI has something called "Boot Graphics Resource Table" and that it overides the default logo if there is a image present (source) How can I edit the logo stored in UEFI firmware or Boot Graphics Resource Table? if it's in the "bootres.dll", which does UEFI use? My disk (spread across a few system/usefi/windows/etc partitions) has around twenty bootres.dlls. The bootres.dll is signed by Microsoft, but I don't have to worry because I can sign the file I edit myself with my own certificate.

    Read the article

  • Virtual Box start from dual boot systme

    - by Richard
    So for a long time now, I've been running Linux on a dual boot system with Windows 7. I don't run Windows very often, however it happens enough now that I started looking at alternatives to reboots. A friend showed me Parallels on his Mac, and I fell in love with the concept of Virtual machines. Since Sun has been in the Unix space since the beginning of time, they likely have the best solution for Linux (big assumption I know). Anyway, to avoid re-installing windows, as I have it set up the way I like it now, I was wondering if there was a way to point to the existing install and boot from that point. Linux is installed on /dev/sda Windows is on /dev/sdb Having never done this before a little handholding would be great as to what step I should take. Thanks for any help in advance!

    Read the article

  • Can't boot Windows after installing Linux

    - by user4035
    I have a partition /dev/sdb1, where my old Windows XP resides. All the files are there intact and I can see them, mounting the disk from Linux. Linux is on /dev/sdb2. But when I choose Windows in LILO prompt, it doesn't load. I have the following lilo.conf: boot = /dev/sdb # Linux bootable partition config begins image = /boot/vmlinuz root = /dev/sdb2 label = Linux read-only # Partitions should be mounted read-only for checking # Linux bootable partition config ends # Windows bootable partition config begins other = /dev/sdb1 label = Windows table = /dev/sdb # Windows bootable partition config ends What can be wrong?

    Read the article

  • How to fix windows 7 boot process

    - by MasterCorban
    Ok so i used xp for years before i was able to get my hands on the Windows7 RC which i bought a new HDD for, and then followed the process to dual-boot. About a month ago xp started acting funny and i thought the disk might be dying. So i started using Windows7 all the time. Today i start the computer and it cant find the disk which xp was on anymore. I guess its dead. So i remove the xp HD and my computer cant start...insert bootable disk or something similar So how can i remove the primary(dead) xp disk and boot straight to Windows 7?

    Read the article

  • Keyboard/Mouse not working when windows vista has reached login screen

    - by Jonas
    I currently have a problem with a system (vista home premium, 64bit). USB kbd/mouse will not work when windows has booted/loaded their drivers and Im stuck at the login screen with no working input devices. None of the available boot options after F8 will boot to working kbd/mouse. They work in the bios setup and they seem powered all the way until a few seconds before the login screen. Legacy USB devices is also enabled in the bios. They also work with the recovery dvd, but I am unable to start the device manager to check or uninstall the mouse/kbd drivers. Cant get devmgmt.msc nor devmgr.dll (with rundll32) to work. System repair does not detect the problem and there are no available restore points (it was disabled). Any ideas?

    Read the article

  • Dual-boot more than two operating systems

    - by aldorado
    I currently run Windows 7 and Ubuntu 12.04 as a dual-boot system. I need Linux, but Ubuntu freezes at least once a day. So I want to replace it with another distribution like Debian or LMDE. On the other hand I am a little concerned that I'll have troubles working with a less user friendly operating system than Ubuntu. So would it be possible to just scale down the Windows partition and install the next Linux as a third system? Thus, with a "triple-boot system" I could keep Ubuntu until I feel familiar with the new system. Afterwards, I guess, it should be possible to replace the Ubuntu partition by expanding the new system?

    Read the article

  • Ubuntu 12.04 (dual boot with Windows 7), doesn't boot after I deleted some files from Windows. What can I do?

    - by sacha
    The Ubuntu 12.04 I have installed (in Dual-Boot with Windows 7) using WUBI worked perfectly for over a month. Then it informed me that I ran out of space on the hard drive and I assumed it was because my hard drive on Windows was full. I logged into Windows and deleted the whole New Volume D. But now the problem is that it is not possible to log into Ubuntu but in Windows it's possible. I really paid attention about not deleting important files in Windows. When i try to log into Ubuntu : _either it does not go far and i have to restart the computer _or it goes until the loading time and a message says something like "[...] Graphics could not be detected [...]" and they ask to choose between 4 options including "Start with poor Graphics", "Reconfigure Graphics", "Troubleshoot" and "Restart the computer". But none of the options run and i also have to restart the computer manually from that point I have plenty of useful files in Ubuntu so i want to find another way to solve the problem instead of Uninstall/Reinstall Ubuntu. I want to know what happened ? And how to make it work ?

    Read the article

  • How to I make my bootcamp partition bootable again?

    - by KJFMusic
    I'm having a similar problem as everyone else in this posting. I have 5 partitions. 3 of which I created for my Mac OS Lion installation, Windows 7 installation and a 3rd for storage. Everything was running fine for quite sometime until recently. My Windows 7 installation has suddenly stopped booting. Instead of a start up screen I get: Windows failed to start. A recent hardware or software change might be the cause. File: \BOOT\BCD Status: 0xc000000d Info: An error occurred while attempting to read the boot configuration data Mac OS Lion starts up fine. I'm unable to mount my "Bootcamp" partition nor the "Storage" partition. On top of that "Storage" has been renamed to "disk0s5". When I installed Windows 7 it didn't recognize the "Storage" partition that was created in Lion so it merged what it thought was free diskspace (I'm assuming the same space that Mac OS recognized as Storage) to the Root Drive of Windows 7 (Bootcamp). Are you able to assist?

    Read the article

  • Windows Broken after Deletion of HP_TOOLS partition

    - by beanland
    When I decided to install Ubuntu on my laptop as a dual-boot, I recognized that Windows 7 was using four separate partitions. I (yes, this was stupid) thought the HP_TOOLS partition was probably one I could get rid of, so I deleted it and installed Ubuntu side-by-side Windows using the installation wizard, but now Windows won't progress past the loading screen without the computer automatically restarting. I've had to use Ubuntu exclusively since then. I'm not sure how I can recover it. All of my files seem to still be there--I can mount the other partition and see them, use them, etc--but Windows 7 won't boot. I really have no idea what to do or what to try, or even if I'm at a salvageable point. here's a screenshot of GParted: This makes me suspicious that it wasn't necessarily the removal of my HP_TOOLS partition but the "unknown" status of that 992.50 KiB partition there, sda1. I'm assuming that's the recovery one? How can I get Windows bootable again? I'm sorry, but I'm so unfamiliar with this sort of thing I'm not quite sure where to start.

    Read the article

  • Do I have to completely reinstall Ubuntu now that it won't boot?

    - by Dave M G
    I just tried installing software called Teamviewer. It said there was some kind of error with unresolved dependancies. Then I realized I was trying to install the 32 bit version, but I needed to install the 64 bit version. So I tried that, and I got an error saying that Ubuntu needed to do a partial upgrade. I thought that was weird, so I just wanted to abandon installing anything and get out of this. I exited all programs and rebooted, and now I can't get back into Ubuntu. After the GRUB screen I get a black screen and no login options. If I boot into recovery, I get the following screen: I booted up a live CD of 12.04 to see if that could help, but it seems the only option is to completely reinstall Ubuntu. Can I repair this in any way, or is my only option to make a fresh install?

    Read the article

  • What to do when Ubuntu 13.10 64-bit does not boot?

    - by Anonymous John
    Ubuntu 13.10 will not boot, it won't even show the grub menu or Ubuntu booting. There is just a purple screen for 20 seconds then a black screen, then the screen says entering power save mode. here are my system specs:Intel DQ965GF Motherboard (OS independant), Intel core 2 64-bit, 12GB HHD (SATA), 200GB HHD (SATA, installed here), 250GB HHD (SATA, Encrypted with LUKS), 3GB DDR2 RAM (DIMM 0 A 1024MB,DIMM 1 A 524MB, DIMM 0 B 1024MB, DIMM 1 B 524MB),2 Rewritable DVD drives (one SATA and one IDE), small floppy drive and car reader, and AMD gallium 0.4. That's all I know from the top of my head, I have no OS to give me more info on the graphics card, but all Ubuntu OSs worked on my PC from 12.04-13.04 just fine. Does this mean will never be able to use Ubuntu 13.10? I think I am screwed.

    Read the article

  • When I boot it says "No any drive found" and turns off after upgrade from 9.10 to 10.04

    - by user797582
    I did an upgrade on the weekend from Ubuntu 9.10 to 10.04 (karmic to lucid). Now, when I restart my computer, it goes through the regular load screen showing my P5K Asus motherboard, just like before but instead of showing the Ubuntu load screen, it tries to start grub but fails and then says "No any drive found" and the screen goes black. I've tried changing the drive configuration in the BIOS to AHCI or RAID and that didn't work. I've tried disabling JMICRON but to no avail. I'm running out of options here. Any advice?

    Read the article

  • Dual Screen screen adjustments for wallpaper

    - by Rogue
    I have a dual screen setup one is horizontal one is vertical problem is that the wallpaper on the vertical one displays as horizontal so i have black space above and below the wallpaper. How can turn the wallpaper around so it displays correctly on the vertical screen.

    Read the article

  • Why my hard disk can't boot from the BIOS?

    - by Mario
    I installed a new sata DVD burner. When I turned on the machine (windows 7) it didn't boot. It can boot from a lubuntu CD. There is an option on lubuntu to boot form the first hard disk. If I select it, the machine boots normally to windows 7. So from the CD I can boot but not from the BIOS. I checked all the options more than once: boot from HD, not boot from removable, boot from USB, boot from optical. The order of the boot sequence is HD then DVD. I tried booting only with the HD; I disconnected both DVDs. I even tried recovery of the MBR: bootsect, bootrec, fixmbr, buildbcd, nt60, etc. So, the question is, does this have a reason, what's the difference between booting from the BIOS (as I think) to from the DVD?. The BIOS is intel, it has BIOS codes on the right bottom corner, it stays at 5A for a while. 5A is "Resetting PATA/SATA bus and all devices".

    Read the article

  • How to boot XBMC 10.1 ISO on USB via grub?

    - by Shi
    I am trying to boot the XBMC Live image (http://xbmc.org/download/) as ISO from USB via grub 1.98. I have a Kubuntu 11.04 image there as well already and it works using the following configuration: menuentry "Kubuntu 11.04 64bit" { loopback loop /boot/iso/kubuntu-11.04-desktop-amd64.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/boot/iso/kubuntu-11.04-desktop-amd64.iso noeject noprompt initrd (loop)/casper/initrd.gz } However, if I try to boot XBMC in an analogue way, I always get an error "Unable to find a medium containing a live file system". I found different approaches to install XBMC, but they all are about installing the distribution on USB, or using grub4dos, or unetbootin. I already found out that XBMC 10.1 is based on Ubuntu 10.04.2 LTS, so I tried those settings - even though they are quite similar to Kubuntu 11.04. Finally, the ISO contains a grub configuration as well in boot/grub/grub.cfg, but even with those parameters, I get the error above. My current configuration is the following one: menuentry "xbmc 10.1" { loopback loop /boot/iso/xbmc-10.1-live.iso linux (loop)/live/vmlinuz video=vesafb boot=live iso-scan/filename=/boot/iso/xbmc-10.1-live.iso xbmc=autostart,nodiskmount splash quiet loglevel=0 persistent quickreboot quickusbmodules notimezone noaccessibility noapparmor noaptcdrom noautologin noxautologin noconsolekeyboard nofastboot nognomepanel nohosts nokpersonalizer nolanguageselector nolocales nonetworking nopowermanagement noprogramcrashes nojockey nosudo noupdatenotifier nouser nopolkitconf noxautoconfig noxscreensaver nopreseed union=aufs initrd (loop)/live/initrd.img } Any more ideas or any more information I should supply?

    Read the article

  • Strange monitor issue - screen goes black after a few seconds

    - by Scott Szretter
    My LCD monitor display is going black (turning off). It's a Samsung SYncMaster 2233 widescreen. I am trying to figure out if there is anything I can do about it, or if the monitor is junk. I have tried multiple computers, all have the same issue. I have tried a different vga cable, same issue. Power and video cables are tight / double checked. When I power on the monitor, the blue light turns on at the bottom. Then a second or two later the video comes up as expected and it looks fine. However, about 2-3 seconds after that, the screen goes black. The blue light is still on and solid at the bottom (blue light normally flashes when the monitor is sleeping). If I power cycle the monitor, same thing happens. With no computer connected or when I unplug the vga cable, I see the searching for signal message "digital", then the screen goes black. However it usually shows "digital" then "analog" after that and switches between the two a few times. The buttons on the side do not do anything, although they may be, I just can not see if they are or not. I can usually get the "digital" message by pressing the buttons on the side, but then it quickly goes black again. What is really strange is sometimes I can get it to work fine. I am not sure what the difference is. Last week I connected it up and it worked fine and it stayed fine for at least a week! I did not turn it off or anything, I just let the OS put the display to sleep. Then this week one morning I started having the screen going black issue again. Seems like something is either loose inside or beginning to fail. Do you think there is any hope for it? update: pushing the input select button causes the "digital" and "analog" messages to flash on the screen, but only for a few seconds then it goes black. When it was working properly, those messages would flash back and fourth for probably 10-20 seconds then a message would show saying check input signal, but now just a black screen.

    Read the article

  • How can I make fsck run non-interactively at boot time?

    - by Nelson
    I have a headless Ubuntu 12.04 server in a datacenter 1500 miles away. Twice now on reboot the system decided it had to fsck. Unfortunately Ubuntu ran fsck in interactive mode, so I had to ask someone at my datacenter to go over, plug in a console, and press the Y key. How do I set it up so that fsck runs in non-interactive mode at boot time with the -y or -p (aka -a) flag? If I understand Ubuntu's boot process correctly, init invokes mountall which in turn invokes fsck. However I don't see any way to configure how fsck is invoked. Is this possible? (To head off one suggestion; I'm aware I can use tune2fs -i 0 -c 0 to prevent periodic fscks. That may help a little but I need the system to try to come back up even if it had a real reason to fsck, say after a power failure.) In response to followup questions, here's the pertinent details of my /etc/fstab. I don't believe I've edited this at all from what Ubuntu put there. UUID=3515461e-d425-4525-a07d-da986d2d7e04 / ext4 errors=remount-ro 0 1 UUID=90908358-b147-42e2-8235-38c8119f15a6 /boot ext4 defaults 0 2 UUID=01f67147-9117-4229-9b98-e97fa526bfc0 none swap sw 0 0

    Read the article

  • Failure to Boot 12.04 on HP AMD Dual Core. Rescue Mode doesn't even come up

    - by L R Bellmore Jr
    I have 12.04 installed on HP 64 bit dual core AMD laptop.. worked great until about 1-2 months ago.. now takes 1/2 hour to 25 hours to boot if it ever does. A minor number of times I get the HP logo with hash lines on screen and it just hangs... When it finally boots 95% it will run until I turn it off days later to see if any of the upgrades fixed the problem. Currently, if it boots, it is random.. .left on over night .. 2 nights ago and came back to a HP logo with Hash Lines horizontal across the screen.. frozen.. rebooted back to black screen.. no HP logo... Most often when it does boot.. no HP logo.. just cursor shows up.. and then I know it will finally load... computer has been made worthless and it is my work computer..HELP PLEASE... Rescue Mode can't be invoked.. computer doesnt respond.. has shown up 3 times in about 100 and when I have tried it... 1 time it resulted in a boot up but then failed in a couple hours.

    Read the article

  • How can I triple boot Xubuntu, Ubuntu and Windows?

    - by ag.restringere
    Triple Booting Xubuntu, Ubuntu and Windows I'm an avid Xubuntu (Ubuntu + XFCE) user but I also dual boot with Windows XP. I originally created 3 partitions and wanted to use the empty one as a storage volume but now I want to install Ubuntu 12.04 LTS (the one with Unity) to do advanced testing and packaging. Ideally I would love to keep these two totally separate as I had problems in the past with conflicts between Unity and XFCE. This way I could wipe the Ubuntu w/ Unity installation if there are problems and really mess around with it. My disk looks like this: /dev/sda1 -- Windows XP /dev/sda2 -- Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 63 78139454 39069696 7 HPFS/NTFS/exFAT /dev/sda2 78141440 156280831 39069696 83 Linux /dev/sda3 156282878 386533375 115125249 5 Extended /dev/sda4 386533376 390721535 2094080 82 Linux swap / Solaris /dev/sda5 156282880 386533375 115125248 83 Linux Keep each in it's own partition and totally separate and be able to select from each of the three systems from the GRUB boot menu... sda1 --- [Windows XP] sda2 --- [Ubuntu 12.04] "Unity" sda3(4,5) -- [Xubuntu 12.02] "Primary XFCE" What is the safest and easiest way to do this without messing my system up and requiring invasive activity?

    Read the article

  • How to boot from toshiba recovery partition after installing ubuntu 14.04.1? [duplicate]

    - by Hunter Dotson
    This question already has an answer here: How to remove Ubuntu and put Windows back on? 14 answers Im new here and have not found a post even close to this so here it is: i installed ubuntu 14.04.1 over my Windows 7 Home Premium installation. didn't loose any important data.skip to when the install is done i tried out ubuntu and got sick of it after a while.(the try ubuntu option was greyed out) i got sick of ubuntu after about an hour and i tried to boot into my recovery partition. That's where im running into trouble: you are supposed to hold down the numerical "0" while turning on the power. but it just proceeds to load grub/ubuntu and does not even try to boot into the recovery partition. "000000000000" is all i get from holding it down I know the recovery partition is intact,but i cant access it,even when setting a boot flag on it. i am stumped and i really need answers thanks in advance! specs Toshiba satellite l775 intel core i3 dual core processor original os:windows 7 home premium 64 bit sp1 let me know if you need more info!

    Read the article

  • Ubuntu 11.10 loads from live usb fine, but boots to black screen from harddrive. Why?

    - by Estel
    A few days ago I had a hard drive failure, which was running Windows XP (32-bit) just fine. The second hard drive in my computer held a few unimportant files, so I formatted it in the Ubuntu setup and installed 11.10 without a hitch. I had been using it for about a week, but decided to install Windows 7 (64-bit) in order to utilize Networking with my home server (running Windows Server 2000). My system is 64-bit based, and thus I had no problems installing other than a basic RAM error that required me to remove my RAM down to a single stick. I played with the settings in Windows 7 for around an hour before I shut down. After reinstalling the RAM, Windows 7 would not boot. In this, I then assumed that something about my system was rejecting Win7 and I reinstalled Ubuntu. However, now Ubuntu (11.10) boots into black screen, and I've already attempted activating the grub menu with the shift key, and following steps listed here: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen but nothing seems to work. I've reinstalled twice now, with the same result each time. Now, the very odd part about this whole scenario is that the USB I installed from has no problems booting as a live USB. This puzzles me greatly, because the hard drive boots straight to black screen and the live USB loads normally. At this point, my only theory is that the boot sector of the hard disk was somehow corrupted with Win7, and that Ubuntu was unable to completely write through. I used Darik's Boot n Nuke to wipe the drive, but was met with an error, this also puzzles me because the hard disk has no promblems reading or writing. Any suggestions/comments are appreciated. If you have a theory, I will be more than happy to oblige. Additional information: Intel Core2 Duo e6400 2.13GHz nVidia GeForce 7-series (7900 GS) 4 GB DDR2 333MHz (2x 2GB) Dell XPS 410 BIOS Revision 2.5.3

    Read the article

  • Grub gives messages about the boot sector being used by other software. What should I do?

    - by Bobble
    This only happens with one of my computers. It is an elderly laptop that has had a long and varied history with several operating systems, but in its retirement it is acting as a server for my home network using Ubuntu 12.04. It is a single-boot system, there are no other systems installed. Every so often, whenever there is a grub upgrade, I notice a message like this: Setting up grub-common (1.99-21ubuntu3.4) ... Installing new version of config file /etc/grub.d/00_header ... Setting up grub2-common (1.99-21ubuntu3.4) ... Setting up grub-pc-bin (1.99-21ubuntu3.4) ... Setting up grub-pc (1.99-21ubuntu3.4) ... /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track. Installation finished. No error reported. Should I be worried about this? What (if anything) should I do about it?

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >