Search Results

Search found 3479 results on 140 pages for 'chris kooken'.

Page 53/140 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Hanging of host network connections when starting KVM guest on bridge

  - by Chris Phillips

  Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

  Read the article

• "Can't create table" when having to many partitions

  - by Chris

  I am currently having a problem I dont understand. Wherever I look it says mySQL (5.5) / InnoDB doesnt have a table limit. I wanted to test the InnoDB compression and was about to create an empty copy of an existing table and ran into the following problem. this one works: CREATE TABLE `hsc` ( LOTS OF STUFF ) ENGINE=InnoDB CHARSET=utf8 PARTITION BY RANGE (pid) SUBPARTITION BY HASH (cons) SUBPARTITIONS 2 (PARTITION hsc_p0 VALUES LESS THAN (10000) , PARTITION hsc_p1 VALUES LESS THAN (20000) , PARTITION hsc_p2 VALUES LESS THAN (30000) , PARTITION hsc_p3 VALUES LESS THAN (40000) , PARTITION hsc_p4 VALUES LESS THAN (50000) , PARTITION hsc_p40 VALUES LESS THAN (4000000) ); this one doesn't: CREATE TABLE `hsc` ( LOTS OF STUFF ) ENGINE=InnoDB CHARSET=utf8 PARTITION BY RANGE (pid) SUBPARTITION BY HASH (cons) SUBPARTITIONS 2 (PARTITION hsc_p0 VALUES LESS THAN (10000) , PARTITION hsc_p1 VALUES LESS THAN (20000) , PARTITION hsc_p2 VALUES LESS THAN (30000) , PARTITION hsc_p3 VALUES LESS THAN (40000) , PARTITION hsc_p4 VALUES LESS THAN (50000) , PARTITION hsc_p5 VALUES LESS THAN (75000) , PARTITION hsc_p6 VALUES LESS THAN (100000) , PARTITION hsc_p7 VALUES LESS THAN (125000) , PARTITION hsc_p8 VALUES LESS THAN (150000) , PARTITION hsc_p9 VALUES LESS THAN (175000) , PARTITION hsc_p40 VALUES LESS THAN (4000000) ); ERROR 1005 (HY000): Can't create table 'hsc' (errno: 1) Its reproducable by removing the number of partitions and adding them again. it does not have to do anything with the name of the table as i tried various names. there is also enough empty space on the HDD. /dev/simfs 230G 26G 192G 12% /var/lib/mysql.mnt There should be no limit on the partitions http://dev.mysql.com/doc/refman/5.5/en/partitioning-limitations.html Maximum number of partitions. The maximum possible number of partitions for a given table (that does not use the NDB storage engine) is 1024. This number includes subpartitions. i have increased both open_files show variables where variable_name LIKE '%open_files%'; +-------------------+-------+ | Variable_name | Value | +-------------------+-------+ | innodb_open_files | 512 | | open_files_limit | 1536 | +-------------------+-------+ No change. Any clues where should I start looking? UPDATE: the whole thing is running in an openvz environment. i saw in users_beancounters that the numflock was a problem, so i increased it. but the problem still persists. maybe this helps: ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 515011 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 515011 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt 200: kmemsize 9309653 13357056 14372700 14790164 0 lockedpages 0 1008 2048 2048 0 privvmpages 675424 686528 1048576 1572864 0 shmpages 33 673 21504 21504 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numproc 49 90 240 240 0 physpages 243761 246945 0 9223372036854775807 0 vmguarpages 0 0 1048576 1048576 0 oomguarpages 81672 83305 1048576 1048576 0 numtcpsock 6 8 360 360 0 numflock 175 188 512 512 8 numpty 1 9 16 16 0 numsiginfo 0 48 256 256 0 tcpsndbuf 104640 263912 1720320 2703360 0 tcprcvbuf 98304 131072 1720320 2703360 0 othersockbuf 32368 89304 1126080 2097152 0 dgramrcvbuf 0 2312 262144 262144 0 numothersock 19 28 360 360 0 dcachesize 2285052 3624426 3409920 3624960 0 numfile 616 870 9312 9312 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numiptent 24 24 128 128 0

  Read the article

• How to securely delete files stored on a SSD?

  - by Chris Neuroth

  From a (very long, but definitely worth to read) article on SSDs: When you delete a file in your OS, there is no reaction from either a hard drive or SSD. It isn’t until you overwrite the sector (on a hard drive) or page (on a SSD) that you actually lose the data. File recovery programs use this property to their advantage and that’s how they help you recover deleted files. The key distinction between HDDs and SSDs however is what happens when you overwrite a file. While a HDD can simply write the new data to the same sector, a SSD will allocate a new (or previously used) page for the overwritten data. The page that contains the now invalid data will simply be marked as invalid and at some point it’ll get erased. So, what would be the best way to securely erase files stored on a SSD? Overwriting with random data as we are used to from hard disks (e.g. using the "shred" utility) won't work unless you overwrite the WHOLE drive...

  Read the article

• Pin the Dock to the top or disable it

  - by Chris Buchholz

  I wonder if it is possible to pin the Mac OS X Dock to the top in Snow Leopard? I see lets of ideas on how to do this when I google for it, and Secrets (the tweaking app) also provide it as an option, but I don't see any of the ways working for me. I guess it must have worked at some point, since people said it did, but I believe this feature might have been removed from Snow Leopard, and therefore does not work for me. Is this so? Is there really no way to pin the Dock to the top of screen? If not, what ways of "getting rid of the dock" can you guys recommend? I have tried with auto-hiding, but my problem is that this will leave a 4px line at the edge of where the Dock is pinned to, that applications wont cover. Thats not ideal for me. As far as I have understood from googling, this line will not appear if the Dock is pinned to the top, hence my question. What other ways do you guys use to get rid of it?

  Read the article

• WordPress wp-config.php with 0500 permissions and user/group Apache user/group - more secure?

  - by Chris Altman

  I changed the owner/group of the wp-config.php file to www-data (Apache's user). I changed the file permission to 0500. Is that more secure than leaving my normal user as the owner and file permission of 0755?

  Read the article

• User account shows two Downloads folders

  - by Chris Lieb

  I have my user account on my D drive and junction'd to the C:\users folder. I accidentally moved my profile Downloads folder (C:\users\me\Downloads) and then moved it back to its path on the D drive (C:\me\Downloads). After doing this, the directory tree for my user profile lists two Downloads directories, one located at C:\users\me and one at D:\me. I tried deleting the directory from the D drive, then restoring it from the Recycle Bin to the proper location on the C drive (actually the D drive, accessed through the junction), but it gave me the two Downloads directories again. Is there some way to fix this so that the only listing is for the C:\users\me\Downloads directory, like it was to begin with?

  Read the article

• Plone site randomly serving wrong content

  - by Chris Miller

  I have a Plone site that has begun to randomly serve up the wrong content. Any given content suddenly shows something else. Sometimes a JPEG loads a stylesheet instead or a stylesheet loads as a page or a page as an image. The images move around, some times our site logo shows a bullet, or one of the other site images. Fiddler shows the wrong content in the response, the apache logs show the content type of the incorrect file (so if the an image loads in place of a style sheet, apache shows that). We thought mod_proxy was the source of our grief, but we get the problem hitting Zope directly. I never get the wrong content using the Medusa Monitor to repeatedly hit the content. I do see ConflictErrors in the instance.log file, and they seem to be correlated to the problem, but not 100%. ZPublisher.Conflict ConflictError at \path\to\object: database conflict error (oid 0x3586, class BTrees._OIBTree.OIBTree, serial this txn started with blah, serial currently committed blah) (X conflicts (0 unresolved) since startup blah) I pulled that off the web, it's not from our logs, but it's the same message. This may be a red herring, it sounds like those messages are normal. We've updated to the 3.3.5, same problems. I'm at a loss. I'm wondering if there a good way to intercept what is being served? Secondly, is there a way to increase the verbosity of the access log to included the content-type? I've even seen the problem manifest in ZMI. It happens more often when we're authenticated. Sometimes it can take a thousand reloads to see the problem, other times it happens in different ways every time we reload. I believe we've seen this problem for a couple years, but it was very intermittent, a page would show the content of a GIF, then a reload later wouldn't happen for a long time. Now it's a huge problem.

  Read the article

• Want to use something like Citrix XenDesktop, Free Alternative?

  - by Chris

  I'm looking to go into IT, general office server management, and it looks like XenDesktop would be a awesome tool to use. If I get it right, you would store a central image of the OS you want to deploy (in an iso file) on the main server. Then use XenDesktop to pull that image down to the client, and it will then boot the OS inside of the virtual machine. Does it download the image of the OS and store it locally (like cloning the VM onto the client?) I'd love to find a free (possibly open source?) alternative to this, I keep on hearing about KVM in Linux and PXE booting a minimalistic OS to use remote KVMs.... Would that be what I'm looking for? Ideally, I'd like a system.. - That allows me to manage one central image for multiple clients (virtualized hardware) - Easily boot a thin client OS that connected to XenDesktop. Would those things be possible with some kind of free alternative? Some guidance would be greatly appreciated.

  Read the article

• What are the consequences of Rooting an Android Phone?

  - by Chris Weber

  Will I have any bad consequences if I root my phone (HTC Incredible on Verizon)? Specifically wondering about updates from Verizon, HTC, etc? I'd like to to this to gain full access to the hardware (LED flashlight, etc), because there isn't a good solution (that doesn't require a full reboot of phone afterward).

  Read the article

• How does Linux determine the SCSI address of a disk?

  - by Chris Sears

  Greetings, I'm working with RHEL 5.5 guest VMs under VMware ESX 4. When I configure the virtual disks in the VM hardware settings, each disk has a SCSI address in the format "N:M". For example, "1:3" would mean SCSI host number 1 and SCSI target ID 3. When I look at the disk info from the VM's BIOS or a Windows OS, the detected SCSI address info matches up with the virtual hardware settings. But under Linux, the SCSI address components don't match up, at least not completely or consistently. I've tried the three supported virtual SCSI and SAS drivers and they all seem to be "broken", but in different ways. Here's a list of the virtual hardware addresses vs what was detected under Linux with each of the drivers: Driver vHW Addr Linux Addr -------- -------- ---------- LSI SAS 0:0 0:0 LSI SAS 0:3 0:1 LSI SAS 0:6 0:2 LSI SCSI 1:1 2:1 LSI SCSI 1:4 2:4 LSI SCSI 1:7 2:7 pvSCSI 2:2 1:2 pvSCSI 2:5 1:5 pvSCSI 2:8 1:8 My main question is why does this happen under Linux? The next question is: how do I get it fixed or fix it myself? If I was going to guess, I'd say it's an issue with how the kernel is handing out the SCSI host number and how the Linux SCSI driver (included with VMware tools) is detecting the SCSI target number. Perhaps the order the drivers are loaded also has something to do with the issue. I'm guessing this would not involve udev, but I could be wrong. Any thoughts would be appreciated. Thanks! PS. My environment is VMware, but I don't need an answer for these drivers specifically. I imagine this might be a problem with any SCSI driver under Linux.

  Read the article

• Prevent nginx from redirecting traffic from https to http when used as a reverse proxy

  - by Chris Pratt

  Here's my abbreviated nginx vhost conf: upstream gunicorn { server 127.0.0.1:8080 fail_timeout=0; } server { listen 80; listen 443 ssl; server_name domain.com ~^.+\.domain\.com$; location / { try_files $uri @proxy; } location @proxy { proxy_pass_header Server; proxy_redirect off; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto https; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Scheme $scheme; proxy_connect_timeout 10; proxy_read_timeout 120; proxy_pass http://gunicorn; } } The same server needs to serve both HTTP and HTTPS, however, when the upstream issues a redirect (for instance, after a form is processed), all HTTPS requests are redirected to HTTP. The only thing I have found that will correct this issue is changing proxy_redirect to the following: proxy_redirect http:// https://; That works wonderfully for requests coming from HTTPS, but if a redirect is issued over HTTP it also redirects that to HTTPS, which is a problem. Out of desperation, I tried: if ($scheme = 'https') { proxy_redirect http:// https://; } But nginx complains that proxy_redirect isn't allowed here. The only other option I can think of is to define the two servers separately and set proxy_redirect only on the SSL one, but then I would have duplicate the rest of the conf (there's a lot in the server directive that I omitted for simplicity sake). I know I could also use an include directive to factor out the redundancy, but I really want to keep just one conf file without any dependencies. So, first, is there something I'm missing that will negate the problem entirely? Or, second, if not, is there any other way (besides including an external file) to factor out the redundant config information so that I can separate out the HTTP and HTTPS versions of the server config?

  Read the article

• How to troubleshoot when one has no idea where to start?

  - by Chris Walton

  I am looking for hints, tips and answers on how to get started on troubleshooting when: The problem is intermittent The problem could lie literally anywhere - operating system; free source software; my own software developments; purchased software; crumbs on the keyboard; the specific combination of software I am currently running; Maxwell's demon; the little blue men actually running the machine have gone on strike; etc. I have expertise only in a few of the areas that are potential candidates for the cause of the problem. The specific problem I am having is detailed below as an example, but I am not seeking answers to my current problem, but rather where and how to start on tackling such problems. I am currently encountering a problem with my new machine. On a few occasions the machine has just frozen; not accepting keystrokes, mouseclicks, or anything except the power on/off switch. Invariably I have been merely browsing the web; I have had a few (<= 6 other applications) running. None of these applications are major; and represent a mix of commercial programs and open source programs, typically migrated from Unix of some variety. My machine is a Windows 7 I7 quad core laptop.

  Read the article

• SharePoint MySite - Purge newsfeed activity?

  - by Chris W

  After setting up User Profile sync with AD I've noticed that the newsfeed section of each user's MySite is now flooded with lots of random notes detailing changes that have been pulled in about their (and their contacts') profiles. Is there anyway to purge this activity and stop updates from the sync service getting listed on the newsfeed? Our users are likely to find it strange getting updates about changes to their own profiles that they didn't make themselves.

  Read the article

• Diagnosing extremely slow network operations.

  - by Chris Becke

  The network: * A windows 7 PC with 2 NICs - one connected to an old style ethernet hub - the other to the internet - with internet sharing enabled * An Apple iMac connected to the hub, successfully utilizing the ICS to access the internet. My problem: Using the Mac, copying from the internet is fast. However, if I connect to a SMB: share on the Windows 7 PC and try and copy anything a few kb the copy operation is appallingly slow with my network card using the Windows 7 control panel showing ~.1% utilization. The NICs are 100Mbs and show a 10x larger throughput (now ~1%) if I download large files over the internet using the Mac. WTF?

  Read the article

• How do I network Win XP Home and Win 7?

  - by Chris Barnhill

  I would like to share files between my Win XP Home system and my new Win 7 system. I am using AT&T Uverse with the Uverse wireless router. Can anyone help me with this? Thanks!

  Read the article

• Google Chrome Launches Internet Explorer on Win7 64-bit

  - by chris.nullptr

  I recently had a nasty trojan on my box have one problem that has persisted after getting rid of it using Microsoft Security Essentials. Launching the chrome.exe executable results in iexplore.exe being launched instead. I have tried uninstalling/reinstalling chrome several times to no avail. What could be causing this behavior and how can I fix it?

  Read the article

• OLTP Sql Server RAID configuration with 10 disks, allocation Unit and disk stripe size

  - by Chris Wood

  On a new db server I only have 10 disks to play with, The usage is about a booking every 3-5 seconds, so not high volume, I know compromises have to be made, but my initial thoughts are - DISK 1 & 2 - RAID 1 - OS DISKS 3,4,5,6 - RAID 10 - Data, Indexes & TempDB DISKS 7,8,9,10 - RAID 10 - Logs & Backup Full backups will take place when there is virtually no traffic on the website so not bothered about the contention with the logs. disk 3-10 - 8kb NTFS unit allocation size disk 3-10 - 64kb Disk Stripe size does this seems to be sensible, any other considerations I have omitted ? thanks

  Read the article

• hung up troubleshooting packet discards

  - by Chris Satola

  I realize my question is generic, but hopefully someone may have some guidance for me. My network consists of Cisco switches. I am seeing a significant amount (upwards of millions of packets per day) transmit drops between two switches. One being a 3750 and the other a 3560. The peak throughput of this link is only upper 400Mbps, so it shouldn't be a bandwidth issue. At this point, I am sort of clueless where to look or what tools I can use to determine what packets are dropping and why. I can setup a SPAN port on that link and wireshark it, but I don't know if that could tell me anything. Does anyone have any suggestions? Thanks in advance.

  Read the article

• After adding a SSD to my MacBook, the HD never spins down.

  - by Chris Woods

  I added a SSD to my MacBook Pro 17 as the primary drive attached to the SATA controller. I moved the HD to the optical bay using the OptiBay from MCE Technologies which I use for my home directory. The problem I have encountered is the HD seems to never stop spinning. I have modified the sleep settings, hoping one of the various options would solve my problem without success. Any suggestions for me?

  Read the article

• Site hanging in iis7 - how do I troubleshoot?

  - by Chris Foot

  I am currently having a problem with a windows 2008 server running IIS 7. The server runs several sites but only seems to have the issue with one particular site. Every so often, the whole server slows to a crawl with nearly all requests timing out! Invariably, when we log in to take a look there is always an IIS process using up around 90% cpu. Looking into the worker processes in IIS there are usually one or two requests that have been running for a long time. They are always in the ExecuteRequestHandler state with ManagedPipeline as the module name and the current ones i'm looking at have been running for 7686248 (what units is this in, it doesn't say?). It is also not always the same page, in fact we have seen at least 3 different pages listed under url when this has happened. It seems that the only way to bring the server back to life is to kill the 90% process! The site is running under .Net 4.0 and the code on it is very similar to other sites on the server which do not have the problem! How do I start troubleshooting this?

  Read the article

• Reliable Linux RAID Card

  - by Chris S

  Can anyone recommend an appropriate RAID card for use under Linux (Ubuntu)? I have three Western Digital SATA drives, and would like to setup either RAID-1 or RAID-5. Software RAID has been very flakey and unreliable for me (e.g. it doesn't seem to mirror the boot partition). Unfortunately, most RAID cards I've seen online don't mention any Linux driver support. Would most cards work in Linux, or do I have to look at a select few that explicitly support Linux?

  Read the article

• Windows 7 Embedded & .NET 4

  - by Chris Nicol

  Can you update the .NET framework on Windows 7 Embedded to the 4 framework?

  Read the article

• Migrating to Windows Server 2008 R2 Domain Controllers - a few Questions/Issues

  - by Chris

  Ok so here's our setup: We have 2 Windows 2003 Domain Controllers. I am trying to replace them with Windows 2008 R2. The 2003 servers are named DC01 and DC02. The 2008 R2 servers are DC1 and DC2. I prepared the Windows Server 2003 Forest Schema for a Domain Controller that runs Windows Server 2008 or Windows Server 2008 R2. Then with both of the new servers up as member servers I ran dcpromo on DC1 using the advanced option and added it successfully to my existing domain. It's roles are GC, DNS and Active Directory Domain Services. I transferred The PDC Emulator, RID Pool Manager, and Infrastructure Master roles to DC1. The Schema Master and Domain Naming master are still on DC01. The first issue that I'm encountering is when I dcpromo the DC2 and select "Replicate data over the network from and existing domain controller" I select that I want to replicate from DC1 and I get the following error: Failed to identify the requested replica partner (dc1.xxx.org) as a valid domain controller with a machine account for (DC2$). This is likely due to either the machine account not being replicated to this domain controller because of replication latency or the domain controller not advertising the Active Directory Domain Services. Please consider retrying the operation with \dc01.xxx.org as the replica partner. "The server is unwilling to process the request. Is this because the Schema Master and Domain Naming Master roles are still on the old DC01? And if so, if I transfer Schema Master and Domain Naming Master roles to DC1 what is the risk or breaking my AD? I'm a little paranoid because this process HAS to be transparent. ANY down time or interruption will result in me getting a verbal ass kicking from my I.T. Director. Both of the new servers DNS point the the old DNS servers (DC01 and DC02) not themselves by the way.

  Read the article

• Bulk Deleting All Messages in a Folder in Microsoft Outlook Web Access

  - by Chris S

  How do you delete all messages in a folder in Outlook, preferrably through Web Access? I left my Outlook account unattended for several days (on vacation) and when I got back I found several folders with over 5k emails, mostly error logging or spam. When I try to open the Outlook client, it just locks up, presumably unable to download that many emails. I can view at most 100 emails at a time, but I can't select all emails to delete or permanently delete them immediately, so manually deleting this many emails is going to take a while. Gmail has a similar feature to select and delete all emails in a folder, and that's free so I figure being a quality non-free product from Microsoft, Outlook should have a similar feature (yes that's sarcasm). I've Googled, but I'm not finding anything. Is this possible?

  Read the article

• backup software that ignores user rights

  - by Chris

  Hi, As a computer technician I have to reinstall systems allmost daily (when it can't be repaired ;-)) My problem is that I recover user files by hand and a external mounting device. Most of the time it works fine, but also weekly I have systems with passwords and personal files which are often not sucessfull recovered. I know you can change owner, but when people have 30 GB's af data, my backup computer works for ages to change the rights. Can anyone think of software (commercial is no problem) which does the following: * backup user data without having user rights troubles * have a option to choose what to backup (email accounts, documents, etc, etc) even when it's externaly mounted, in short, it reconizes the folder structure) * Works on different OS's like XP, Vista, W7

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >