Search Results

Search found 21470 results on 859 pages for 'computer graphics'.

Page 53/859 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • Computer won't wake from hibernate

    - by Icoo
    So I have a pretty dumb problem...I accidentaly pressed Hibernate while trying to Restart...since then my computer wont boot into Ubuntu anymore (through normal mode or single user mode - rescue mode that is)...all I get is: mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys/ on root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or dirctory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= boot arg. BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Obviously I tried to fire up the Live CD and run fsck (or e2fsck) from there (or just try to do a Check of /dev/sdb1 my partition via gparted - which is basically the same thing). But it doesn't allow me...both gparted and fsck say that the device is busy (I can't even mount it in the LiveCD to rescue data)...umount /dev/sdb1 says its not mounted...any ideas?

    Read the article

  • Cannot start service SPUserCodeV4 on computer

    - by ybbest
    When you create a sand boxed solution for SharePoint 2010 in Visual Studio 2010 and try to deploy the solution , you could get the error “Error occurred in deployment step ‘Retract Solution’: Cannot start service SPUserCodeV4 on computer”(See the Picture1 below). In order to fix this , you need to go to Central Administration -> System Settings -> Manage services on server and start service “Microsoft SharePoint Foundation User Code Service” If you are developing SharePoint on DC(Domain controller),you need to check the solution from my previous post. Error message.(Picture1) Locate Microsoft SharePoint Foundation User Code Service.(Picture 2)

    Read the article

  • Please help with samba, can't access files from other computer

    - by user254074
    Maybe I am missing something but all I want to do is be able to access and transfer files from one folder on my main computer to my htpc. Both computers are running Ubuntu 14.04. I followed the instructions on this video but I am not sure if I need to do something on the HTPC to access my Movie folder. I went into nautilus then Browse Network Windows Network Workgroup but I get an error and it won't let me access it. Is there something I am doing wrong?

    Read the article

  • Ubuntu 12.04 - Read only file system+computer crash/freezes after an update that got interupted

    - by user288542
    I've run into an error with Ubuntu while I was updating it. During the update my power went out and interrupted the update. When I finally got power and booted my computer, I received an error, telling me to remount ./ and basically told me I could press S to skip or F to fix. (I forgot exactly what it said) but anyways, I originally pressed F to fix, but that didn't solve the problem, so then I went into the terminal and I tried to remount that way, but I couldn't execute because it's stuck in "file system read only." Sorry, my description of the problem is dull. I'm debating on just reinstalling, but I have a ton of files I would like to keep, about 3+ years worth of websites I've built. Is there a proper way to fix this?

    Read the article

  • My ethernet connection is not working but it is detected by my computer

    - by smithy545
    I'm setting up an old computer with ubuntu server 12.04. I wiped the drive and went through the installation fine but afterwards the ethernet would not work. It's physically connected to the router and the card is recognized by lspci(SiS 900) but it won't connect at all. I've plugged in and installed the drivers for a wifi adapter and it's worked with the same router. Just so you know I've turned it on and off plenty of times. Any help would be appreciated.

    Read the article

  • Limiting what resumes computer from suspend

    - by user1399195
    I'm having a ton of trouble getting Suspend to work with my laptop. I want to start using Ubuntu but this is a pretty important aspect since I take my laptop with me everywhere. Anyways, I wanted to narrow down the possible problem with my laptop. What happens is that when I suspend my computer, within seconds, it just boots back up. I have changed /proc/acpi/wakeup to where everything is disabled but that did nothing. Is there a way where I can disable every feature from waking up the laptop except the power button?

    Read the article

  • Computer freezes up

    - by Namaachi
    I am using the latest Ubuntu OS and up-to-date Chrome browser. Occasionally when I am working at a 5 hour stretch, the computer will freeze up completely and I will have to close down manually and reboot. When this happens I lose the material I have been working on as I cannot save it. And I often receive a notice at this time saying that my profile is not available or that I do not have a profile. I am an Ubuntu user not a technician and do not know what to do about this problem.

    Read the article

  • CD help and Dead Computer[SOLVED]

    - by fifi_defluffy
    I am trying to burn 12.04 on a CD. Should be it working or is it not? After reading a couple of other forums that relates to this question, they say to use a 700MB CD which I am but again is not working. Another question is that the reason for this is because I have a School Desktop which I use and the OS seems to have crashed and that OS files seem to be missing so this looks like an option at the moment. So basically, Can't burn it on a CD (says its too small) and trying to rework a partial dead computer...

    Read the article

  • MDI Child form over a graphics

    - by Poco
    How to show a MDI child form over a graphics control (created from a Panel's CreateGraphics method, for instance) in a MDI Parent control. The MDI Parent graphics control gets over the MDI Child form.

    Read the article

  • Generate terminal graphics

    - by Werner
    Hi, which open source software options exist for generating terminal graphics? I mean, there is for instance the nice matplotlib, which can generate beautiful plots from data, in PNG or similar formats. But there are similar alternatives for generating just kind of ascii graphics? Thanks

    Read the article

  • If you could take one computer science course now, what would it be?

    - by HenryR
    If you had the opportunity to take one computer science course now, and as a result significantly increase your knowledge in a subject area, what would it be? Undergraduate or graduate level. Compilers? Distributed algorithms? Concurrency theory? Advanced operating systems? Let me know why. (Note that I appreciate this isn't a far fetched scenario - but time and inertia might be preventing people from taking the course or reading the book or whatever)

    Read the article

  • Graphics for iPhone development from Maya

    - by calypso
    Hello, I am new to integrating graphics into iPhone apps and need some direction on integrating graphics from maya into the application flow. Does anyone out there have any advice on good books or tutorials covering the design flow for Maya - iPhone SDK? Thanks

    Read the article

  • What areas of computer science are particularly relevant to mobile development?

    - by MalcomTucker
    This isn't a platform specific question - rather I'm interested in the general platform independent areas of computer science that are particularly relevant to mobile applications development. For example, things like compression techniques, distributed synchronisation algorithims etc.. what theoretical concepts have you found relevant, useful or enabling when building mobile apps?

    Read the article

  • Output to TV only works if monitor is plugged in

    - by Greg Sansom
    I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

    Read the article

  • Ubuntu + Wacom Intuos 4 + MyPaint HELP!

    - by Sativa
    Please keep in mind I'm not that computer savvy, but I will try any suggestion so please help me out! My tablet will stop working if the USB connection is ever broken, or the Ubuntu software is being updated. Sometimes it will stop working for no reason that I can see. The lights will still be on, but it won't be responsive. It doesn't work again until I restart the laptop with the tablet plugged in, which is grating if you have to do it every 25 min. or so... I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! Also, MyPaint is frequently having hiccups. It seems to save fine but at times it will randomly close down and when I open files they're often empty. They turn into 0Kb files and only contain a single empty layer. Also very grating, considering I lose days of work for no clear reason and without any heads up. Again, I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! The error message reads; Traceback (most recent call last): File "/usr/share/mypaint/gui/application.py", line 177, at_application_start(*junk=()) else: self.filehandler.open_file(fn) variables: {'fn': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora'), 'self.filehandler.open_file': ('local', <bound method FileHandler.wrapper of <gui.filehandling.FileHandler object at 0x7fdb89063a10>>)} File "/usr/share/mypaint/gui/drawwindow.py", line 60, wrapper(self=<gui.filehandling.FileHandler object>, *args=(u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',), **kwargs={}) try: func(self, *args, **kwargs) # gtk main loop may be called in here... variables: {'self': ('local', <gui.filehandling.FileHandler object at 0x7fdb89063a10>), 'args': ('local', (u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',)), 'func': ('local', <function open_file at 0x7fdb8b397b90>), 'kwargs': ('local', {})} File "/usr/share/mypaint/gui/filehandling.py", line 231, open_file(self=<gui.filehandling.FileHandler object>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora') try: self.doc.model.load(filename, feedback_cb=self.gtk_main_tick) except document.SaveLoadError, e: variables: {'self.doc.model.load': ('local', <bound method Document.load of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'feedback_cb': (None, []), 'self.gtk_main_tick': ('local', <function gtk_main_tick at 0x7fdb8b397b18>), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 544, load(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', **kwargs={'feedback_cb': <function gtk_main_tick>}) try: load(filename, **kwargs) except gobject.GError, e: variables: {'load': ('local', <bound method Document.load_ora of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'kwargs': ('local', {'feedback_cb': <function gtk_main_tick at 0x7fdb8b397b18>}), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 772, load_ora(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', feedback_cb=<function gtk_main_tick>) tempdir = tempdir.decode(sys.getfilesystemencoding()) z = zipfile.ZipFile(filename) print 'mimetype:', z.read('mimetype').strip() variables: {'zipfile.ZipFile': ('global', <class 'zipfile.ZipFile'>), 'z': (None, []), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/lib/python2.7/zipfile.py", line 770, __init__(self=<zipfile.ZipFile object>, file=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', mode='r', compression=0, allowZip64=False) if key == 'r': self._RealGetContents() elif key == 'w': variables: {'self._RealGetContents': ('local', <bound method ZipFile._RealGetContents of <zipfile.ZipFile object at 0x7fdb9b952790>>)} File "/usr/lib/python2.7/zipfile.py", line 811, _RealGetContents(self=<zipfile.ZipFile object>) if not endrec: raise BadZipfile, "File is not a zip file" if self.debug > 1: variables: {'BadZipfile': ('global', <class 'zipfile.BadZipfile'>)} BadZipfile: File is not a zip file

    Read the article

  • Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

    - by cpm
    I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

    Read the article

  • Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

    - by cpm
    I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

    Read the article

  • Advice for a computer science sophomore in college?

    - by RDas
    Hi Everyone! I'm a sophomore in college majoring in Computer Science and Math. I have always loved programming. I started programming in C when I was nine years old and over the years I've picked up Visual Basic, C#, Java, C++, JavaScript, Objective-C, Python, Ruby, elementary Haskell and elementary Erlang, and I learned Perl back in the day which I've mostly forgotten. I have not done much network programming. I have done CGI programming, but that was about six/seven years ago. I've done some socket programming and written (school) programs to do interprocess communication, which I understood and liked. I'm taking a course on client/server programming and another one on network security next semester, which I am really looking forward to. I'm seeking advice on how to proceed with future learning. I've mostly done application (mobile and desktop) development, not much of web development. I'd like to pick up some web development this coming semester. Since I know Ruby and Python, should I start by learning Django and/or Rails? Any other suggestions on starting web development? I have a good understanding of HTML and CSS. Also, I'd also like to know how hard it is to pick up and be good (read: productive) in functional programming languages coming from a purely structured/object oriented background? I've been reading up on Erlang and Haskell, and I'd like to know your opinions on whether it's worth my time trying to learn them. What about Lisp, Scheme and other functional languages? Any help/ideas would be really appreciated.

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >