Search Results

Search found 3478 results on 140 pages for 'daniel sh'.

Page 53/140 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • Why is sudo bash different from regular bash

    - by cyberjar09
    Problem description : I am using something called play framework in my development which requires me to make the python script play available in the path. Hence I create a symbolic link in /usr/local/bin ... Now I have written a shell script (call it status.sh) which calls this python script as follows : play status <some values here related to my app> &> /tmp/xyz.txt and this shell script then sends me the file via email. This works perfectly when I execute the script as follows ./script.sh. However when the script is executed as a cron expression everyday I get an output from stderr saying 'play: command not found'. Hence I did some digging on my own and here are my findings : echo $PATH when I am on the shell shows that I have /usr/local/bin available to me hence I can successfully execute the command play status however when I type in sudo bash and then echo $PATH I do not have the path /usr/local/bin anymore. It is a limited set of folders (one of them being /usr/bin). Q : Why this behavior ?! I fail to understand why the path is different. Also as a workaround would you suggest I do : new symbolic link from /usr/bin to /usr/local/bin (what are the side effects of this?) remove /usr/local/bin sym link altogether and only use /usr/bin is there a convention that I am not following here for linking new programs and executing them from $PATH ? Thanks.

    Read the article

  • /tmp shows 690 Mb full, actual size 72 K, Why?

    - by Ankit
    Why is /tmp diretory on my system showing 690 Mb full, whereas du -sh /tmp shows only 72K full. drwxrwxrwt 2 lightdm lightdm 4096 Aug 29 21:49 at-spi2 drwx------ 2 ankit ankit 4096 Aug 29 21:50 keyring-0JTfoY drwx------ 2 ankit ankit 4096 Aug 29 21:44 keyring-rChLLL drwx------ 2 root root 16384 Jul 22 02:10 lost+found drwx------ 2 ankit ankit 4096 Jan 1 1970 orbit-ankit drwx------ 2 lightdm lightdm 4096 Aug 29 21:50 pulse-2L9K88eMlGn7 drwx------ 2 root root 4096 Aug 29 21:44 pulse-PKdhtXMmr18n drwx------ 2 ankit ankit 4096 Aug 29 21:50 pulse-zR1TZUAZfmQW drwx------ 2 ankit ankit 4096 Aug 29 21:44 ssh-dlslOXOq2203 drwx------ 2 ankit ankit 4096 Aug 29 21:50 ssh-MrQQVRyy3316 -rw------- 1 ankit ankit 0 Aug 29 21:45 tmp0qnNG4 -rw------- 1 ankit ankit 0 Aug 29 21:50 tmpVvSMt6 -rw------- 1 ankit ankit 0 Aug 29 21:49 tmpy9Gadz -rw-rw-r-- 1 lightdm lightdm 0 Aug 29 21:44 unity_support_test.0 ankit@duster:/tmp$ df -h df: `/home/ankit/.gvfs': Transport endpoint is not connected Filesystem Size Used Avail Use% Mounted on /dev/sda1 79G 11G 65G 14% / udev 2.9G 4.0K 2.9G 1% /dev tmpfs 1.2G 868K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 220K 2.9G 1% /run/shm /dev/sda7 38G 690M 35G 2% /tmp /dev/sda5 93G 26G 63G 30% /home /dev/sda6 93G 1.6G 87G 2% /boot /dev/sda3 154G 69G 78G 48% /home/mount_150 ankit@duster:/tmp$ ankit@duster:/tmp$ ankit@duster:/tmp$ sudo du -sh /tmp/ 72K

    Read the article

  • Source-control your BI Publisher reports

    - by Dmitry Nefedkin
    Version control systems (VCS) like Subversion, Git and the others has been widely adopted and became the must-have tool in any software development project. Source artifacts and checked out, modified, checked in, all the history of changes is tracked by the VCS.  But what if the development tool stores the source/configuration artifacts not in your laptop's hard drive, but in some shared repository instead? Well, we definitely need a way for export/import our artifacts from/to this repository.   Oracle BI Publisher report development approach is based on such a shared repository model (catalog), and starting from BI Publisher 11.1.1.5 Oracle ships Catalog Utility, which can be utilized to export/import the reports from the command line.  To start using the BI Publisher Catalog Utility you should: Go to the file system of the server where BI Publisher binaries has been installed and locate the following file: <MW_HOME>/Oracle_BI1/clients/bipublisher/BIPCatalogUtil.zip Copy the file to your local filesystem and unzip it. I will refer to this unzipped directory as <BIP_CLIENT_DIR> below If you do not want to pass server BI Publisher server URL, username and password during each invocation, modify the corresponding values inside <BIP_CLIENT_DIR>/config/xmlp-client-config.xml Open the terminal window and go to <BIP_CLIENT_DIR>/bin Make sure that the following environment variables are set: JAVA_HOME, ORACLE_HOME Now it's time to run the utility: if you are on Linux - just run BIPCatalogUtil.sh and pass the parameters according to the utility documentation if you are on MS Windows the bad news are that the command script for MS Windows is missing, and support.oracle.com note 1333726.1 says that a temporary solution is "create a .cmd file by setting up a classpath and copying the same commands from the .sh script". The good news are that I've created this script already,  please download the it from GitHub Hope you will find this utility useful during you day-by-day BI Publisher development. 

    Read the article

  • Can't start webcam for google video services

    - by wisemonkey
    I've got Ubuntu 11.10 64 bit and have installed the google video chat plugin. However webcam doesn't seem to work (black screen -- no video at all). For cheese it works but shows really bad (black and white kinda) image. Following some link I installed guvcview if I start it then image looks neat. Any suggestions on how can it be fixed? If it helps I've tried the solution: $ sudo mv /opt/google/talkplugin/GoogleTalkPlugin /opt/google/talkplugin/GoogleTalkPlugin.old $ sudo gedit /opt/google/talkplugin/GoogleTalkPlugin and putting following lines in: #!/bin/sh LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old OR #!/bin/sh LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old Cause I've both files. Finally $sudo chmod +x /opt/google/talkplugin/GoogleTalkPlugin.old I closed and reopened chrome then started gmail tried video call -- black screen :-/ Ok so today finally google+ provided me with trouble shoot link and advised me: The plug-in won't install If you're having trouble installing the plug-in, or are receiving a message asking you to reinstall it, you should check to make sure your configuration is right. To do so simply: Check to make sure the Google Talk Plugin Video Accelerator and Google Talk NPAPI Plugin are enabled. If you're using Chrome you can type about:plugins in your browser to display your plug-ins. Make sure you're not using Internet Explorer 64-bit (this is a browser version that is 64 bit as opposed to 32 bit). Ensure that you don't have any "click to run" extensions enabled. If you're still experiencing this issue after checking your configuration you can follow these steps: Refresh the browser page. Close any running Google Talk plug-in processes. Close all open and running browser processes. Restart your computer. Uninstall and then reinstall the plug-in. Try a different browser such as Google Chrome or Mozilla Firefox. I looked in about:plugins for chrome and firefox: I don't have Google Talk NPAPI Plugin, does that matter? and I thought its installed with google talk plugin or no?

    Read the article

  • Is there any way to kill a zombie process without reboot?

    - by Pedram
    Is there any way to kill a zombie process without reboot?Here is how it happens: I wanted to download a 12GB torrent.After adding the .torrent file, transmission turned into a zombie process.I tried ktorrent too.Same behavior.Finally I could download the file using µTorrent but after closing the program, it turns into a zombie as well. I tried using kill skill and pkill with different options and -9 signal but no success. In some answers in web I found out killing the parent can kill the zombie, but killing wine didn't help either. Is there another way? Edit: ps -o pid,ppid,stat,comm PID PPID STAT COMMAND 7121 2692 Ss bash 7317 7121 R+ ps pstree output: init---GoogleTalkPlugi---4*[{GoogleTalkPlug}] +-NetworkManager---dhclient ¦ +-{NetworkManager} +-acpid +-apache2---5*[apache2] +-atd +-avahi-daemon---avahi-daemon +-bonobo-activati---{bonobo-activat} +-clock-applet +-console-kit-dae---63*[{console-kit-da}] +-cron +-cupsd +-2*[dbus-daemon] +-2*[dbus-launch] +-desktopcouch-se---desktopcouch-se +-explorer.exe +-firefox---run-mozilla.sh---firefox-bin---plugin-containe---8*[{plugin-contain}] ¦ +-14*[{firefox-bin}] +-gconfd-2 +-gdm-binary---gdm-simple-slav---Xorg ¦ ¦ +-gdm-session-wor---gnome-session---bluetooth-apple ¦ ¦ ¦ ¦ +-fusion-icon---compiz---sh---gtk-window-deco ¦ ¦ ¦ ¦ +-gdu-notificatio ¦ ¦ ¦ ¦ +-gnome-panel ¦ ¦ ¦ ¦ +-gnome-power-man ¦ ¦ ¦ ¦ +-gpg-agent ¦ ¦ ¦ ¦ +-nautilus---bash ¦ ¦ ¦ ¦ ¦ +-{nautilus} ¦ ¦ ¦ ¦ +-nm-applet ¦ ¦ ¦ ¦ +-polkit-gnome-au ¦ ¦ ¦ ¦ +-2*[python] ¦ ¦ ¦ ¦ +-qstardict---{qstardict} ¦ ¦ ¦ ¦ +-ssh-agent ¦ ¦ ¦ ¦ +-tracker-applet ¦ ¦ ¦ ¦ +-trackerd ¦ ¦ ¦ ¦ +-wakoopa---wakoopa ¦ ¦ ¦ ¦ ¦ +-3*[{wakoopa}] ¦ ¦ ¦ ¦ +-{gnome-session} ¦ ¦ ¦ +-{gdm-session-wo} ¦ ¦ +-{gdm-simple-sla} ¦ +-{gdm-binary} +-6*[getty] +-gnome-keyring-d---2*[{gnome-keyring-}] +-gnome-screensav +-gnome-settings- +-gnome-system-mo---{gnome-system-m} +-gnome-terminal---bash---ssh ¦ +-bash---pstree ¦ +-gnome-pty-helpe ¦ +-{gnome-terminal} +-gvfs-afc-volume---{gvfs-afc-volum} +-gvfs-fuse-daemo---3*[{gvfs-fuse-daem}] +-gvfs-gdu-volume +-gvfsd +-gvfsd-burn +-gvfsd-http +-gvfsd-metadata +-gvfsd-trash +-hald---hald-runner---hald-addon-acpi ¦ ¦ +-hald-addon-cpuf ¦ ¦ +-hald-addon-inpu ¦ ¦ +-hald-addon-stor ¦ +-{hald} +-hotot---xdg-open ¦ +-3*[{hotot}] +-indicator-apple +-indicator-me-se +-indicator-sessi +-irqbalance +-kded4 +-kdeinit4---kio_http_cache_ ¦ +-klauncher +-kglobalaccel +-knotify4 +-modem-manager +-multiload-apple +-mysqld---10*[{mysqld}] +-named---10*[{named}] +-nmbd +-notification-ar +-notify-osd +-pidgin---{pidgin} +-polkitd +-pulseaudio---gconf-helper ¦ +-2*[{pulseaudio}] +-rsyslogd---2*[{rsyslogd}] +-rtkit-daemon---2*[{rtkit-daemon}] +-services.exe---plugplay.exe---2*[{plugplay.exe}] ¦ +-winedevice.exe---3*[{winedevice.exe}] ¦ +-3*[{services.exe}] +-smbd---smbd +-snmpd +-sshd +-timidity +-trashapplet +-udevd---2*[udevd] +-udisks-daemon---udisks-daemon ¦ +-{udisks-daemon} +-upowerd +-upstart-udev-br +-utorrent.exe---8*[winemenubuilder] ¦ +-{utorrent.exe} +-vnstatd +-winbindd---2*[winbindd] +-2*[winemenubuilder] +-wineserver +-wnck-applet +-wpa_supplicant +-xinetd System monitor and top screenshots which show the zombie process is using resources:

    Read the article

  • How do I source a shell script for Node Version Manager?

    - by Matthew Patrick Cashatt
    Hi and thanks for looking! I am new to Linux/Ubuntu, but I have set up an Ubuntu box on which to run Node.js. I have had moderate success, but now I need to be able to easily upgrade my version of Node. Many folks recommend using Node Version Manager. I followed the directions, but when I try to do something like this: nvm ls I get a messaging stating that No command NVM found I have gone back to check the steps I followed to install NVM, but there is one part that is tricky for may and I think to be the culprit: sourcing the file for bash. From the instructions: To activate nvm, you need to source it from your bash shell . ~/nvm/nvm.sh I always add this line to my ~/.bashrc or ~/.profile file to have it automatically sources upon login. Often I also put in a line to use a specific version of node. So which file should I add this to? I am guessing profile since it's ubuntu?? Also, where in the file do I add this line? After I have added this line, do I need to reboot or anything? Any help would be deeply appreciated--especially if you can show me an example profile file with . ~/nvm/nvm.sh integrated so that I can see usage. Thanks, Matt

    Read the article

  • How can I use a script to control a VirtualBox guest?

    - by TheWickerman666
    Refer to : Launch an application in Windows from the Ubuntu desktop I was wondering if Takkat could elaborate on the actual execution i.e. howto in the script file. This will be greatly helpful. Thanks in advance my script file InternetExplorerVM.sh looks like this, execution is /path/to/InternetExplorerVM.sh "C:\Program Files\Internet Explorer\iexplore.exe" #!/bin/bash # start Internet Explorer inside of a Windows7 Ultimate VM echo "Starting 'Internet Explorer' browser inside Windows7 virtual machine" echo "" sleep 1 echo "Please be patient" VBoxManage startvm b307622e-6b5e-4e47-a427-84760cf2312b sleep 15 echo "" echo "Now starting 'Internet Explorer'" ##VBoxManage --nologo guestcontrol b307622e-6b5e-4e47-a427-84760cf2312b execute --image "$1" --username RailroadGuest --password bnsf1234 VBoxManage --nologo guestcontrol b307622e-6b5e-4e47-a427-84760cf2312b execute --image "C:\\Program/ Files\\Internet/ Explorer\\iexplore.exe" --username RailroadGuest --password bnsf1234 --wait-exit --wait-stdout echo "" echo "Saving the VM's state now" VBoxManage controlvm b307622e-6b5e-4e47-a427-84760cf2312b savestate sleep 2 #Check VM state echo "" echo "Check the VM state" VBoxManage showvminfo b307622e-6b5e-4e47-a427-84760cf2312b | grep State exit My apologies for any mistakes, this is my first time posting on askubuntu.Thanks a ton in advance. This has been very helpful. Need this for BNSF guests, their Mainframe emulator works exclusively on Java enabled Internet Explorer.

    Read the article

  • JDK8 New Build Infrastructure

    - by kto
    I unintentionally posted this before I verified everything, so once I have verified it all works, I'll updated this post. But this is what should work... Most Interesting Builder in the World: "I don't always build the jdk, but when I do, I prefer The New JDK8 Build Infrastructure. Stay built, my friends." So the new Build Infrastructure changes have been integrated into the jdk8/build forest along side the older Makefiles (newer in makefiles/ and older ones in make/). The default is still the older makefiles. Instructions can be found in the Build-Infra Project User Guide. The Build-Infra project's goal is to create the fastest build possible and correct many of the build issues we have been carrying around for years. I cannot take credit for much of this work, and wish to recognize the people who do so much work on this (and will probably still do more), see the New Build Infrastructure Changeset for a list of these talented and hard working JDK engineers. A big "THANK YOU" from me. Of course, every OS and system is different, and the focus has been on Linux X64 to start, Ubuntu 11.10 X64 in particular. So there are at least a base set of system packages you need. On Ubuntu 11.10 X64, you should run the following after getting into a root permissions situation (e.g. have run "sudo bash"): apt-get install aptitude aptitude update aptitude install mercurial openjdk-7-jdk rpm ssh expect tcsh csh ksh gawk g++ build-essential lesstif2-dev Then get the jdk8/build sources: hg clone http://hg.openjdk.java.net/jdk8/build jdk8-build cd jdk8-build sh ./get_source.sh Then do your build: cd common/makefiles bash ../autoconf/configure make We still have lots to do, but this is a tremendous start. -kto

    Read the article

  • What went wrong with my curl install?

    - by Danjah
    I'm fresher than the prince to Linux, I've been following the instructions here: http://chrisfulstow.com/running-node-js-on-windows-with-virtualbox-and-ubuntu (the link tells what I am generally trying to do). I'm all up and running in VBox, and am at the curl install part, I may have done the curl part a week ago I forget. So I ran this command anyway: danjah@danjah-VirtualBox:~$ sudo apt-get install curl Result: [sudo] password for danjah: Reading package lists... Done Building dependency tree Reading state information... Done curl is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Then: $ curl http://npmjs.org/install.sh | sudo npm_install=rc sh Result: fetching: { gzip: stdin: unexpected end of file /bin/tar: Child returned status 1 /bin/tar: Error is not recoverable: exiting now It failed Should I be concerned? How can I test curl? How can I avoid these situations? Perhaps there's a generic way of checking to see if I've already installed packages/etc? Case specific answers and general advice most appreciated. cheers, d

    Read the article

  • How to start WebLogic Server using default scripts?

    - by Luz Mestre-Oracle
    There are a few common issues reported when starting weblogic server using scripts. 1. User is not able to access weblogic console. 2. After a few days/hours weblogic server stops abruptly. 3. When user closes putty, they are not able to connect to weblogic server anymore. 4. When user closes windows command prompt, they are not able to connect to weblogic server anymore. 5. Weblogic is started using startManagedWebLogic.cmd/startManagedWebLogic.sh. By default, WebLogic Server does not run in background mode, so after you close the window the process finishes as well. In Linux/Unix based platforms, you need to use: nohup ./startManagedWebLogic.sh <Server> <URL> & In Windows platforms, you need to start Managed Servers using Windows Services: How to Install MS Windows Services For FMW 11g WebLogic Domain Admin and Managed Servers (Doc ID 1060058.1) http://docs.oracle.com/cd/E23943_01/web.1111/e13708/winservice.htm There a few more reasons that could cause similar symptoms, like JVM crash, signals sent by the Operating System, and many other reasons.  But the above steps is the first one to start. Enjoy!

    Read the article

  • SteamCMD can't add files to my home directory

    - by Angle O'Saxon
    I'm trying to clean up the administration of some game servers I run on a Ubuntu box, part of which has been finally setting permissions properly so I can run the Steam console tool that controls updates and such. I had been running it as root using sudo, but I changed the permissions so that I can start it as a regular user rather than root. That bit seems to work fine, but now when SteamCMD actually starts, it errors with the following output ./steam.sh: line 24: /home/angleosaxon/.steampid: Permission denied Installing breakpad exception handler for appid(steam)/version(1334262703) SteamUpdater: Error: Couldn't create directory /home/angleosaxon/Steam/package, got error 13 [ 0%] Download complete. [----] Verifying installation... unlinked 0 orphaned pipes [----] !!! Fatal Error: Steam failed to load: *SteamStartEngine(0xbfa7cfa0) failed with error 1: Failed to open logfile /home/angleosaxon/Steam/steam.log Leaving aside the question of why it wants to add this information to my home directory, why is it getting access denied errors? As I understand it, since it's being run by my account, it operates with my permissions, so it should be able to read/write from my home directory, shouldn't it? This is the command I'm using to run it: /opt/steamcmd/steam.sh "+login UserAccount \"This is not my actual password.\"" +force_install_dir $ServerDir "+app_update 215360 validate" +quit

    Read the article

  • what other bash variables are available during execution such as $USER that can assist on my script?

    - by semi-newbie
    This is related to question 19245, in that one of the responders answered the question in an awesome way, and very VERY clear to any newbie. Now here is a question that i can't seem to figure. i wrote a script for starting the vmware firefox plugin (don't worry. i gave that up and now run vBox VERY happily. i left vmware for my servers :) ) I needed to start the plugin as sudo, but i also needed to pass an argument (password) to it, that happen to be the same. So, if my password was Hello123, the command would be: sudo ./myscript.sh hi other Hello123 running from command line, the script would ask for my sudo password and then run. i wanted to capture THAT password and pass it as well. i also wanted to run graphically, so i tried gksudo, and there is an option -p that returns the password for variable assignment. well, that was a nightmare, because i would still get prompted for the original sudo: see below Find UserName vUser=$USER Find password (and hopefully enable sudo) vP=gksudo -p -D somedescriptiontext echo Execute command gksudo ./myscript.sh hi $vUser $vP and i still get prompted twice. so my question is tri-fold: is there a variable i can use for the password, just like there is one for user, $USER? is there a different way i should be assigning the value resulting of the command i have in $vP? i am wondering if executing the way i have it, does it in an uninitiated session and not the current one, since i am getting some addtl warning type errors on some variables blah blah i tried using Zenity to just capture the text, but then of course, i couldn't pass that value to sudo, so i could only use as a parameter, which puts me back in 2 prompts. Thanksssssssssss!

    Read the article

  • How to correctly write an installation or setup document

    - by UmNyobe
    I just joined a small start-up as a software engineer after graduation. The start-up is 4 year old, and I am working with the CEO and the COO, even if there are some people abroad. Basically they both used to do almost everything. I am currently on some kind of training phase. I have at my disposition architecture, setup and installation internal documentation. Architecture documentation is like a bible and should contain complete information. The rest are used to give directions in different processes. The issue is that these documents are more or less dated, as they just didn't have the time to change them. I will be in charge of training the next hires, and updating these documents is part of my training. In some there is a lot of hard-coded information like: Install this_module_which_still_exists cd this_dir_name_changed cp this_file_name_changed other_dir_name_changed ./config_script.sh ./execute_script.sh The issues i have faced : Either the module installation is completely different (for instance now there is an rpm, or a different OS) Either names changed, and i need to switch old names by new names Description of the purpose of the current step missing. Information about a whole topic is missing Fortunately these guys are around and I get all the information I want and all the explanations I need. I want to bring a design to the next documents so in the future people don't feel like they are completely rewriting a document each time they are updating it. Do you have suggestions? If there is a lightweight design methodology available online you can point me to it's nice too. One thing I will do for sure is set up a versioning repository for the documents alone. There is already one for the source code so I don't know why internal documents deserve a different treatment.

    Read the article

  • Multisystem Script won't work! "Syntax error:redirection unexpected" Worked 2 days ago?

    - by user74005
    this is my first question. I use Multisystem all of the time and have installed it on both Kubuntu and Ubuntu and have used it with no issues. I wiped my hard drive to try some new OSs I'm now using the exact same OS (Ubuntu 12.05) I used to load my USB stick to begin with and now I'm getting this ridiculous syntax error. I know the script is correct, I'm following the exact same steps I used to get to this point and I'm getting different results ?!?! I'm very confused by this. I have no clue how to begin addressing this issue. I get the same syntax error on Kubuntu now too, which did have multisystem installed. I run "sh install-depot-multisystem.sh" and get "Syntax error:redirection unexpected", this worked literally 2 days ago. The only thing that has changed is my face has grown some more facial hair and my head hurts from bangin it against the wall over this issue. The OS is exactly the same, the script is the same; but now it won't install. I'm lost and really hoping someone can help. Append Just to append to this a bit https://lists.ubuntu.com/archives/ub...er/000264.html I needed to do a chmod 777 on the script, I'm still getting a syntax error on Kubuntu...but it did install successfully. I'll mark this as resovled! Thanks anyway, I'll try to spruse up on my Linux skills.

    Read the article

  • ??OSW (OSWatcher Black Box) ????

    - by Feng
       OSWatcher Black Box, ??OSW,?oracle???????????????,?????OS??????????OS??????????,??CPU/Memory/Swap/Network IO/Disk IO?????? +++ ????????OSW? OSW?????????,????????????????,???mrtg, cacti, sar, nmon, enterprise manger grid control. ????OSW?????: 1. ???????,???????2. ???????,????CPU,???????????3. ???????,????????????????????????OS? ???????OS???,??OS?????,?????????????;??????????????????????,???????. ???????,????????:?????????,??????????,????????????(root cause),?????????????????????????,OSW??????,??????: 1. ??????????OS??????????????????????????OSW??,?????????OS??,??????DB/???? 2. ??ORACLE Database Performance???,?????????????OS??????OS?????????????Swapping,???????????????,?????????,???AWR?????????latch/mutex?????? 3. ??????????????AWR??????????,top5??????????;?CPU,??,Swap, Disk IO?????????????OSW??????????,????????????????????????OSW???,??????????????? 4. ?????ORA-04030?????CJQ0, P00X, J00X?????????,???????OSW,???????????????????OS????????? 5. ????server process??hung?,??????OSW????????????????suspend???,?????????CPU/Memory? 6. ??Listener hung???,?????OSW??????????????? 7. Login Storm??:????????????,????,????ASH,AWR????????????????OSW?ps?????,??????, oracle ?server process????????? ???,OSW????????????????????OS?????????????,??????DBA???OSW??????????????OSW,????DB Performance????,????????OSW???? +++ ?????OSW??????: 1. ??????????????,???????,???????? 2. OSW???????? OSW??????????????OS???????,??ps, vmstat, netstat, mpstat, top;????????????????? ?????????CPU, Disk IO, Disk Space, Memory;???????????????,??????????????????????????,??OSW????????:?????????,CPU????90%??;???free space???????????????????????????,??OSW????????? +++ ????????UNIX/LINUX???/??OSW: 1. ???301137.1???OSW 2. ????????(/tmp??),??????????root?? $ tar xvf osw.tar 3. ?? $ nohup ./startOSWbb.sh 60 48 gzip & ????????,??OSW,????60???????,???????48?????(??????????),???????gzip?????? 4. ????? $ ./stopOSWbb.sh ?????????archive???? ????????????????????OSW???????,???????

    Read the article

  • android View not attached to window manager...

    - by Daniel Benedykt
    Hi I am having some of the following exceptions: java.lang.IllegalArgumentException: View not attached to window manager at android.view.WindowManagerImpl.findViewLocked(WindowManagerImpl.java:355) at android.view.WindowManagerImpl.updateViewLayout(WindowManagerImpl.java:191) at android.view.Window$LocalWindowManager.updateViewLayout(Window.java:428) at android.app.Dialog.onWindowAttributesChanged(Dialog.java:596) at android.view.Window.setDefaultWindowFormat(Window.java:1013) at com.android.internal.policy.impl.PhoneWindow.access$700(PhoneWindow.java:86) at com.android.internal.policy.impl.PhoneWindow$DecorView.drawableChanged(PhoneWindow.java:1951) at com.android.internal.policy.impl.PhoneWindow$DecorView.fitSystemWindows(PhoneWindow.java:1889) at android.view.ViewRoot.performTraversals(ViewRoot.java:727) at android.view.ViewRoot.handleMessage(ViewRoot.java:1633) at android.os.Handler.dispatchMessage(Handler.java:99) at android.os.Looper.loop(Looper.java:123) at android.app.ActivityThread.main(ActivityThread.java:4338) at java.lang.reflect.Method.invokeNative(Native Method) at java.lang.reflect.Method.invoke(Method.java:521) at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) at dalvik.system.NativeStart.main(Native Method) I have google it and see that it has something to do with popups and turning the screen, but there is no reference to my code. The questions are: 1) is there a way to find out exactly when this issue is happening? 2) other than turning the screen, is there another event or action that triggers this error? 3) how do I prevent this to happen? Thanks

    Read the article

  • Byte array serialization in JSON.NET

    - by Daniel Earwicker
    Given this simple class: class HasBytes { public byte[] Bytes { get; set; } } I can round-trip it through JSON using JSON.NET such that the byte array is base-64 encoded: var bytes = new HasBytes { Bytes = new byte[] { 1, 2, 3, 4 } }; // turn it into a JSON string var json = JsonConvert.SerializeObject(bytes); // get back a new instance of HasBytes var result1 = JsonConvert.DeserializeObject<HasBytes>(json); // all is well Debug.Assert(bytes.Bytes.SequenceEqual(result1.Bytes)); But if I deserialize this-a-wise: var result2 = (HasBytes)new JsonSerializer().Deserialize( new JTokenReader( JToken.ReadFrom(new JsonTextReader( new StringReader(json)))), typeof(HasBytes)); ... it throws an exception, "Expected bytes but got string". What other options/flags/whatever would need to be added to the "complicated" version to make it properly decode the base-64 string to initialize the byte array? Obviously I'd prefer to use the simple version but I'm trying to work with a CouchDB wrapper library called Divan, which sadly uses the complicated version, with the responsibilities for tokenizing/deserializing widely separated, and I want to make the simplest possible patch to how it currently works.

    Read the article

  • Windows 7 UAC manifest file for some VB6 application

    - by Daniel
    Hi, all, I have an old VB6 application which should run on Windows 7 (with UAV set to the default level, 3 of 4 IMHO). It has the functionality to update itself, and Windows 7 is now complaining that it would modify the computer (At least windows 7 is right here). I was able to run it in Vista with some kind of manifest file, but this does not seem to work anymore (which is the intended behaviour if I think of it). The manifest file is this: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="1.1.0.24" processorArchitecture="X86" name="IKOfficeAppStarter" type="win32"/> <description>IKOffice Starter</description> <dependency> <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="X86" publicKeyToken="6595b64144ccf1df" language="*"/> </dependentAssembly> </dependency> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2"> <security> <requestedPrivileges> <requestedExecutionLevel level="asInvoker" uiAccess="true"/> </requestedPrivileges> </security> </trustInfo> </assembly> The manifest can be found near the exe "IKOffice Starter.exe" and is called "IKOffice Starter.exe.manifest", which should be okey. Currently the Shield Icon has gone from my .exe, but when try to start the software, i get the message "Der angeforderte Vorgang erfordert höhere Rechte", or translated to english "the requested operation requires elevation". What can I do to stop windows to bug me anymore, so I can install this application on our clients computers. Hey, I already told Windows to run it as Invoker, so why is it still complaining?

    Read the article

  • How Can I Bypass the X-Frame-Options: SAMEORIGIN HTTP Header?

    - by Daniel Coffman
    I am developing a web page that needs to display, in an iframe, a report served by another company's SharePoint server. They are fine with this. The page we're trying to render in the iframe is giving us X-Frame-Options: SAMEORIGIN which causes the browser (at least IE8) to refuse to render the content in a frame. First, is this something they can control or is it something SharePoint just does by default? If I ask them to turn this off, could they even do it? Second, can I do something to tell the browser to ignore this http header and just render the frame?

    Read the article

  • Using FFmpeg in c#?

    - by daniel
    So i know its a fairly big challenge but i want to write a basic movie player/converter in c# using the FFmpeg library. However the first obstacle i need to overcome is wrapping the FFmpeg library in c#. I downloaded ffmpeg but couldn't compile it on windows, so i downloaded a precompiled version for me. Ok awesome. Then i started looking for c# wrappers. I have looked around and have found a few wrappers such as SharpFFmpeg (http://sourceforge.net/projects/sharpffmpeg/) and ffmpeg-sharp (http://code.google.com/p/ffmpeg-sharp/). First of all i wanted to use ffmpeg-sharp as its LGPL and SharpFFmpeg is GPL. However it had quite a few compile errors. Turns out it was written for the mono compiler, i tried compiling it with mon but couldn't figure out how. I then started to manually fix the compiler errors myself, but came across a few scary ones and thought i'd better leave those alone. So i gave up on ffmpeg-sharp. Then i looked at SharpFFmpeg and it looks like what i want, all the functions P/Invoked for me. However its GPL? Both the AVCodec.cs and AVFormat.cs files look like ports of avcodec.c and avformat.c which i reckon i could port myself? Then not have to worry about licencing. But i wan't to get this right before i go ahead and start coding. Should I: Write my own c++ library for interacting with ffmpeg, then have my c# program talk to the c++ library in order to play/convert videos etc. OR Port avcodec.h and avformat.h (is that all i need?) to c# by using a whole lot of DllImports and write it entirely in c#? First of all consider that i'm not great at c++ as i rarely use it but i know enough to get around. The reason i'm thinking #1 might be the better option is that most FFmpeg tutorials are in c++ and i'd also have more control over memory management that if i was to do it in c#. What do you think? Also would you happen to have any usefull links (perhaps a tutorial) for using FFmpeg? EDIT: spelling mistakes

    Read the article

  • Need example for BouncyCastle PGP File encryption in C#

    - by Daniel Brink
    Hi, I'm trying to write an c#.net app to encrypt files using my private key (in ascii format) and any other public key (also in ascii format). The BouncyCastle library looks like the correct thing to use, but I cannot find documentation for C#. Could anyone please give me an example of how to use BouncyCastle to encrypt a file. Thank you.

    Read the article

  • jquery.ui.draggable.js and jquery.ui.widget.js conflict

    - by Daniel S
    hello I had a working application, which uses a jquery ui dialog. I wanted to make the dialog draggable. As far as I know the only thing needed is the jquery.ui.draggable.js script. So I added it to the scripts I am using, but know I get the following error (as shown in the firebug console): base is not a constructor The relevante line in jquery.ui.widget.js is: var basePrototype = new base(); This is how I am adding all the scripts: <script type="text/javascript" src="/media/development-bundle/jquery-1.4.2.js"></script> <script type="text/javascript" src="/media/development-bundle/ui/jquery.ui.core.js"></script> <script type="text/javascript" src="/media/development-bundle/ui/jquery.ui.widget.js"></script> <script type="text/javascript" src="/media/development-bundle/ui/jquery.ui.draggable.js"></script> <script type="text/javascript" src="/media/development-bundle/ui/jquery.ui.position.js"></script> <script type="text/javascript" src="/media/development-bundle/ui/jquery.ui.autocomplete.js"></script> <script type="text/javascript" src="/media/development-bundle/ui/jquery.ui.dialog.js"></script> Am I doing something wrong? or is this a problem with jquery? Thanks in advance for any help

    Read the article

  • WMI Security error TF255437 when installing TFS 2010 RC

    - by Daniel O
    Does anyone know the resolution to the following error. In this scenario, TFS will be using a local report server instance which points uses a separate SQL Server database engine instance. An error occurred while querying the Windows Management Instrumentation (WMI) interface on the following computer databaseServer. The following error message was received: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).

    Read the article

  • IE8: Disable cleartype?

    - by Daniel
    For IE7, it's possible to add filter: none; to the body css to disable cleartype on fonts through CSS. I don't like the fuzzy look it gives, and it isn't really consistent across browsers. IE; Firefox and IE6 show it differently. IE8 however, seems to ignore the css option, even when forcing the browser into IE7 compatibility mode using: <meta http-equiv="X-UA-Compatible" content="IE=7" /> TL;DR: How do I disable clear-type fonts in IE8 through CSS?

    Read the article

  • wsdl2java excpetion

    - by Daniel
    java org.apache.axis2.wsdl.WSDL2Java -s -p studs.exchange -uri https://api.betfair.com/exchange/v5/BFExchangeService.wsdl Retrieving document at 'https://api.betfair.com/exchange/v5/BFExchangeService.wsdl'. log4j:WARN No appenders could be found for logger (org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder). log4j:WARN Please initialize the log4j system properly. Exception in thread "main" org.apache.axis2.wsdl.codegen.CodeGenerationException: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.generate(CodeGenerationEngine.java:271) at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35) at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24) Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException at org.apache.axis2.wsdl.codegen.extension.SimpleDBExtension.engage(SimpleDBExtension.java:53) at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.generate(CodeGenerationEngine.java:224) ... 2 more Caused by: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.axis2.wsdl.codegen.extension.SimpleDBExtension.engage(SimpleDBExtension.java:50) ... 3 more Caused by: java.lang.NoSuchMethodError: org.apache.ws.commons.schema.XmlSchema.getTypeByName(Ljava/lang/String;)Lorg/apache/ws/commons/schema/XmlSchemaType; at org.apache.axis2.schema.SchemaCompiler.isComponetExists(SchemaCompiler.java:2728) at org.apache.axis2.schema.SchemaCompiler.getParentSchemaFromIncludes(SchemaCompiler.java:2670) at org.apache.axis2.schema.SchemaCompiler.getParentSchemaFromIncludes(SchemaCompiler.java:2704) at org.apache.axis2.schema.SchemaCompiler.getParentSchema(SchemaCompiler.java:2644) at org.apache.axis2.schema.SchemaCompiler.processElement(SchemaCompiler.java:758) at org.apache.axis2.schema.SchemaCompiler.processElement(SchemaCompiler.java:552) at org.apache.axis2.schema.SchemaCompiler.process(SchemaCompiler.java:1991) at org.apache.axis2.schema.SchemaCompiler.processParticle(SchemaCompiler.java:1874) at org.apache.axis2.schema.SchemaCompiler.processComplexType(SchemaCompiler.java:1081) at org.apache.axis2.schema.SchemaCompiler.processAnonymousComplexSchemaType(SchemaCompiler.java:980) at org.apache.axis2.schema.SchemaCompiler.processSchema(SchemaCompiler.java:934) at org.apache.axis2.schema.SchemaCompiler.processElement(SchemaCompiler.java:592) at org.apache.axis2.schema.SchemaCompiler.processElement(SchemaCompiler.java:563) at org.apache.axis2.schema.SchemaCompiler.compile(SchemaCompiler.java:370) at org.apache.axis2.schema.SchemaCompiler.compile(SchemaCompiler.java:280) at org.apache.axis2.schema.ExtensionUtility.invoke(ExtensionUtility.java:103) ... 8 more whats is happening here? what about log4j

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >